The Ventura Problem

Alasdair Allan · Alasdair Allan · commit 3666e7ed8439 · 2022-11-01T10:23:23.000Z
diff --git a/documentation/asciidoc/microcontrollers/c_sdk/your_first_binary.adoc b/documentation/asciidoc/microcontrollers/c_sdk/your_first_binary.adoc
@@ -1,5 +1,7 @@
 == Your First Binaries
 
+WARNING: If you are using an Apple Mac, and running macOS Ventura, there has been a change in how the Finder works which causes drag-and-drop to fail. Please see our https://www.raspberrypi.com/news/the-ventura-problem/[blog post] for a full explanation, and workarounds, and our https://github.com/raspberrypi/pico-sdk/issues/1081[Github issue] tracking the problem for the current status.
+
 === Blink an LED
 
 The first program anyone writes when using a new microcontroller is to blink an LED on and off. The Raspberry Pi Pico comes with a single LED on-board. The LED is connected to `GP25` on the board's Raspberry Pi RP2040 for Pico, and `WL_GPIO0` on the Infineon 43439 wireless chip for Pico W.
diff --git a/documentation/asciidoc/microcontrollers/micropython/drag-and-drop.adoc b/documentation/asciidoc/microcontrollers/micropython/drag-and-drop.adoc
@@ -21,3 +21,5 @@ Then go ahead and:
 . You can access the REPL via USB Serial. 
 
 The https://datasheets.raspberrypi.com/pico/raspberry-pi-pico-python-sdk.pdf[Raspberry Pi Pico Python SDK] book contains step-by-step instructions for connecting to your Pico and programming it in MicroPython using both the command line and the https://thonny.org/[Thonny] IDE.
+
+WARNING: If you are using an Apple Mac, and running macOS Ventura, there has been a change in how the Finder works which causes drag-and-drop to fail. Please see our https://www.raspberrypi.com/news/the-ventura-problem/[blog post] for a full explanation, and workarounds, and our https://github.com/raspberrypi/pico-sdk/issues/1081[Github issue] tracking the problem for the current status.
