|
| 1 | +// SPDX-License-Identifier: GPL-2.0 |
| 2 | +/* |
| 3 | + * UCSI driver for Cypress CCGx Type-C controller |
| 4 | + * |
| 5 | + * Copyright (C) 2017-2018 NVIDIA Corporation. All rights reserved. |
| 6 | + * Author: Ajay Gupta <ajayg@nvidia.com> |
| 7 | + * |
| 8 | + * Some code borrowed from drivers/usb/typec/ucsi/ucsi_acpi.c |
| 9 | + */ |
| 10 | +#include <linux/acpi.h> |
| 11 | +#include <linux/delay.h> |
| 12 | +#include <linux/i2c.h> |
| 13 | +#include <linux/module.h> |
| 14 | +#include <linux/pci.h> |
| 15 | +#include <linux/platform_device.h> |
| 16 | + |
| 17 | +#include <asm/unaligned.h> |
| 18 | +#include "ucsi.h" |
| 19 | + |
| 20 | +struct ucsi_ccg { |
| 21 | + struct device *dev; |
| 22 | + struct ucsi *ucsi; |
| 23 | + struct ucsi_ppm ppm; |
| 24 | + struct i2c_client *client; |
| 25 | +}; |
| 26 | + |
| 27 | +#define CCGX_RAB_INTR_REG 0x06 |
| 28 | +#define CCGX_RAB_UCSI_CONTROL 0x39 |
| 29 | +#define CCGX_RAB_UCSI_CONTROL_START BIT(0) |
| 30 | +#define CCGX_RAB_UCSI_CONTROL_STOP BIT(1) |
| 31 | +#define CCGX_RAB_UCSI_DATA_BLOCK(offset) (0xf000 | ((offset) & 0xff)) |
| 32 | + |
| 33 | +static int ccg_read(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len) |
| 34 | +{ |
| 35 | + struct i2c_client *client = uc->client; |
| 36 | + const struct i2c_adapter_quirks *quirks = client->adapter->quirks; |
| 37 | + unsigned char buf[2]; |
| 38 | + struct i2c_msg msgs[] = { |
| 39 | + { |
| 40 | + .addr = client->addr, |
| 41 | + .flags = 0x0, |
| 42 | + .len = sizeof(buf), |
| 43 | + .buf = buf, |
| 44 | + }, |
| 45 | + { |
| 46 | + .addr = client->addr, |
| 47 | + .flags = I2C_M_RD, |
| 48 | + .buf = data, |
| 49 | + }, |
| 50 | + }; |
| 51 | + u32 rlen, rem_len = len, max_read_len = len; |
| 52 | + int status; |
| 53 | + |
| 54 | + /* check any max_read_len limitation on i2c adapter */ |
| 55 | + if (quirks && quirks->max_read_len) |
| 56 | + max_read_len = quirks->max_read_len; |
| 57 | + |
| 58 | + while (rem_len > 0) { |
| 59 | + msgs[1].buf = &data[len - rem_len]; |
| 60 | + rlen = min_t(u16, rem_len, max_read_len); |
| 61 | + msgs[1].len = rlen; |
| 62 | + put_unaligned_le16(rab, buf); |
| 63 | + status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); |
| 64 | + if (status < 0) { |
| 65 | + dev_err(uc->dev, "i2c_transfer failed %d\n", status); |
| 66 | + return status; |
| 67 | + } |
| 68 | + rab += rlen; |
| 69 | + rem_len -= rlen; |
| 70 | + } |
| 71 | + |
| 72 | + return 0; |
| 73 | +} |
| 74 | + |
| 75 | +static int ccg_write(struct ucsi_ccg *uc, u16 rab, u8 *data, u32 len) |
| 76 | +{ |
| 77 | + struct i2c_client *client = uc->client; |
| 78 | + unsigned char *buf; |
| 79 | + struct i2c_msg msgs[] = { |
| 80 | + { |
| 81 | + .addr = client->addr, |
| 82 | + .flags = 0x0, |
| 83 | + } |
| 84 | + }; |
| 85 | + int status; |
| 86 | + |
| 87 | + buf = kzalloc(len + sizeof(rab), GFP_KERNEL); |
| 88 | + if (!buf) |
| 89 | + return -ENOMEM; |
| 90 | + |
| 91 | + put_unaligned_le16(rab, buf); |
| 92 | + memcpy(buf + sizeof(rab), data, len); |
| 93 | + |
| 94 | + msgs[0].len = len + sizeof(rab); |
| 95 | + msgs[0].buf = buf; |
| 96 | + |
| 97 | + status = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); |
| 98 | + if (status < 0) { |
| 99 | + dev_err(uc->dev, "i2c_transfer failed %d\n", status); |
| 100 | + kfree(buf); |
| 101 | + return status; |
| 102 | + } |
| 103 | + |
| 104 | + kfree(buf); |
| 105 | + return 0; |
| 106 | +} |
| 107 | + |
| 108 | +static int ucsi_ccg_init(struct ucsi_ccg *uc) |
| 109 | +{ |
| 110 | + unsigned int count = 10; |
| 111 | + u8 data; |
| 112 | + int status; |
| 113 | + |
| 114 | + data = CCGX_RAB_UCSI_CONTROL_STOP; |
| 115 | + status = ccg_write(uc, CCGX_RAB_UCSI_CONTROL, &data, sizeof(data)); |
| 116 | + if (status < 0) |
| 117 | + return status; |
| 118 | + |
| 119 | + data = CCGX_RAB_UCSI_CONTROL_START; |
| 120 | + status = ccg_write(uc, CCGX_RAB_UCSI_CONTROL, &data, sizeof(data)); |
| 121 | + if (status < 0) |
| 122 | + return status; |
| 123 | + |
| 124 | + /* |
| 125 | + * Flush CCGx RESPONSE queue by acking interrupts. Above ucsi control |
| 126 | + * register write will push response which must be cleared. |
| 127 | + */ |
| 128 | + do { |
| 129 | + status = ccg_read(uc, CCGX_RAB_INTR_REG, &data, sizeof(data)); |
| 130 | + if (status < 0) |
| 131 | + return status; |
| 132 | + |
| 133 | + if (!data) |
| 134 | + return 0; |
| 135 | + |
| 136 | + status = ccg_write(uc, CCGX_RAB_INTR_REG, &data, sizeof(data)); |
| 137 | + if (status < 0) |
| 138 | + return status; |
| 139 | + |
| 140 | + usleep_range(10000, 11000); |
| 141 | + } while (--count); |
| 142 | + |
| 143 | + return -ETIMEDOUT; |
| 144 | +} |
| 145 | + |
| 146 | +static int ucsi_ccg_send_data(struct ucsi_ccg *uc) |
| 147 | +{ |
| 148 | + u8 *ppm = (u8 *)uc->ppm.data; |
| 149 | + int status; |
| 150 | + u16 rab; |
| 151 | + |
| 152 | + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, message_out)); |
| 153 | + status = ccg_write(uc, rab, ppm + |
| 154 | + offsetof(struct ucsi_data, message_out), |
| 155 | + sizeof(uc->ppm.data->message_out)); |
| 156 | + if (status < 0) |
| 157 | + return status; |
| 158 | + |
| 159 | + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, ctrl)); |
| 160 | + return ccg_write(uc, rab, ppm + offsetof(struct ucsi_data, ctrl), |
| 161 | + sizeof(uc->ppm.data->ctrl)); |
| 162 | +} |
| 163 | + |
| 164 | +static int ucsi_ccg_recv_data(struct ucsi_ccg *uc) |
| 165 | +{ |
| 166 | + u8 *ppm = (u8 *)uc->ppm.data; |
| 167 | + int status; |
| 168 | + u16 rab; |
| 169 | + |
| 170 | + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, cci)); |
| 171 | + status = ccg_read(uc, rab, ppm + offsetof(struct ucsi_data, cci), |
| 172 | + sizeof(uc->ppm.data->cci)); |
| 173 | + if (status < 0) |
| 174 | + return status; |
| 175 | + |
| 176 | + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, message_in)); |
| 177 | + return ccg_read(uc, rab, ppm + offsetof(struct ucsi_data, message_in), |
| 178 | + sizeof(uc->ppm.data->message_in)); |
| 179 | +} |
| 180 | + |
| 181 | +static int ucsi_ccg_ack_interrupt(struct ucsi_ccg *uc) |
| 182 | +{ |
| 183 | + int status; |
| 184 | + unsigned char data; |
| 185 | + |
| 186 | + status = ccg_read(uc, CCGX_RAB_INTR_REG, &data, sizeof(data)); |
| 187 | + if (status < 0) |
| 188 | + return status; |
| 189 | + |
| 190 | + return ccg_write(uc, CCGX_RAB_INTR_REG, &data, sizeof(data)); |
| 191 | +} |
| 192 | + |
| 193 | +static int ucsi_ccg_sync(struct ucsi_ppm *ppm) |
| 194 | +{ |
| 195 | + struct ucsi_ccg *uc = container_of(ppm, struct ucsi_ccg, ppm); |
| 196 | + int status; |
| 197 | + |
| 198 | + status = ucsi_ccg_recv_data(uc); |
| 199 | + if (status < 0) |
| 200 | + return status; |
| 201 | + |
| 202 | + /* ack interrupt to allow next command to run */ |
| 203 | + return ucsi_ccg_ack_interrupt(uc); |
| 204 | +} |
| 205 | + |
| 206 | +static int ucsi_ccg_cmd(struct ucsi_ppm *ppm, struct ucsi_control *ctrl) |
| 207 | +{ |
| 208 | + struct ucsi_ccg *uc = container_of(ppm, struct ucsi_ccg, ppm); |
| 209 | + |
| 210 | + ppm->data->ctrl.raw_cmd = ctrl->raw_cmd; |
| 211 | + return ucsi_ccg_send_data(uc); |
| 212 | +} |
| 213 | + |
| 214 | +static irqreturn_t ccg_irq_handler(int irq, void *data) |
| 215 | +{ |
| 216 | + struct ucsi_ccg *uc = data; |
| 217 | + |
| 218 | + ucsi_notify(uc->ucsi); |
| 219 | + |
| 220 | + return IRQ_HANDLED; |
| 221 | +} |
| 222 | + |
| 223 | +static int ucsi_ccg_probe(struct i2c_client *client, |
| 224 | + const struct i2c_device_id *id) |
| 225 | +{ |
| 226 | + struct device *dev = &client->dev; |
| 227 | + struct ucsi_ccg *uc; |
| 228 | + int status; |
| 229 | + u16 rab; |
| 230 | + |
| 231 | + uc = devm_kzalloc(dev, sizeof(*uc), GFP_KERNEL); |
| 232 | + if (!uc) |
| 233 | + return -ENOMEM; |
| 234 | + |
| 235 | + uc->ppm.data = devm_kzalloc(dev, sizeof(struct ucsi_data), GFP_KERNEL); |
| 236 | + if (!uc->ppm.data) |
| 237 | + return -ENOMEM; |
| 238 | + |
| 239 | + uc->ppm.cmd = ucsi_ccg_cmd; |
| 240 | + uc->ppm.sync = ucsi_ccg_sync; |
| 241 | + uc->dev = dev; |
| 242 | + uc->client = client; |
| 243 | + |
| 244 | + /* reset ccg device and initialize ucsi */ |
| 245 | + status = ucsi_ccg_init(uc); |
| 246 | + if (status < 0) { |
| 247 | + dev_err(uc->dev, "ucsi_ccg_init failed - %d\n", status); |
| 248 | + return status; |
| 249 | + } |
| 250 | + |
| 251 | + status = devm_request_threaded_irq(dev, client->irq, NULL, |
| 252 | + ccg_irq_handler, |
| 253 | + IRQF_ONESHOT | IRQF_TRIGGER_HIGH, |
| 254 | + dev_name(dev), uc); |
| 255 | + if (status < 0) { |
| 256 | + dev_err(uc->dev, "request_threaded_irq failed - %d\n", status); |
| 257 | + return status; |
| 258 | + } |
| 259 | + |
| 260 | + uc->ucsi = ucsi_register_ppm(dev, &uc->ppm); |
| 261 | + if (IS_ERR(uc->ucsi)) { |
| 262 | + dev_err(uc->dev, "ucsi_register_ppm failed\n"); |
| 263 | + return PTR_ERR(uc->ucsi); |
| 264 | + } |
| 265 | + |
| 266 | + rab = CCGX_RAB_UCSI_DATA_BLOCK(offsetof(struct ucsi_data, version)); |
| 267 | + status = ccg_read(uc, rab, (u8 *)(uc->ppm.data) + |
| 268 | + offsetof(struct ucsi_data, version), |
| 269 | + sizeof(uc->ppm.data->version)); |
| 270 | + if (status < 0) { |
| 271 | + ucsi_unregister_ppm(uc->ucsi); |
| 272 | + return status; |
| 273 | + } |
| 274 | + |
| 275 | + i2c_set_clientdata(client, uc); |
| 276 | + return 0; |
| 277 | +} |
| 278 | + |
| 279 | +static int ucsi_ccg_remove(struct i2c_client *client) |
| 280 | +{ |
| 281 | + struct ucsi_ccg *uc = i2c_get_clientdata(client); |
| 282 | + |
| 283 | + ucsi_unregister_ppm(uc->ucsi); |
| 284 | + |
| 285 | + return 0; |
| 286 | +} |
| 287 | + |
| 288 | +static const struct i2c_device_id ucsi_ccg_device_id[] = { |
| 289 | + {"ccgx-ucsi", 0}, |
| 290 | + {} |
| 291 | +}; |
| 292 | +MODULE_DEVICE_TABLE(i2c, ucsi_ccg_device_id); |
| 293 | + |
| 294 | +static struct i2c_driver ucsi_ccg_driver = { |
| 295 | + .driver = { |
| 296 | + .name = "ucsi_ccg", |
| 297 | + }, |
| 298 | + .probe = ucsi_ccg_probe, |
| 299 | + .remove = ucsi_ccg_remove, |
| 300 | + .id_table = ucsi_ccg_device_id, |
| 301 | +}; |
| 302 | + |
| 303 | +module_i2c_driver(ucsi_ccg_driver); |
| 304 | + |
| 305 | +MODULE_AUTHOR("Ajay Gupta <ajayg@nvidia.com>"); |
| 306 | +MODULE_DESCRIPTION("UCSI driver for Cypress CCGx Type-C controller"); |
| 307 | +MODULE_LICENSE("GPL v2"); |
0 commit comments