mmc: sunxi: Disable HS-DDR mode for H5 eMMC controller by default

wens · storulf · commit d49d92ace497 · 2019-02-06T16:02:37.000+01:00
Some H5 boards seem to not have proper trace lengths for eMMC to be able to use the default setting for the delay chains under HS-DDR mode. These include the Bananapi M2+ H5 and NanoPi NEO Core2. However the Libre Computer ALL-H3-CC-H5 works just fine. For the H5 (at least for now), default to not enabling HS-DDR modes in the driver, and expect the device tree to signal HS-DDR capability on boards that work. Reported-by: Chris Blake <chrisrblake93@gmail.com> Fixes: 07bafc1 ("mmc: sunxi: Use new timing mode for A64 eMMC controller") Cc: <stable@vger.kernel.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
@@ -1399,7 +1399,16 @@ static int sunxi_mmc_probe(struct platform_device *pdev)
 	mmc->caps	       |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
 				  MMC_CAP_ERASE | MMC_CAP_SDIO_IRQ;
 
-	if (host->cfg->clk_delays || host->use_new_timings)
+	/*
+	 * Some H5 devices do not have signal traces precise enough to
+	 * use HS DDR mode for their eMMC chips.
+	 *
+	 * We still enable HS DDR modes for all the other controller
+	 * variants that support them.
+	 */
+	if ((host->cfg->clk_delays || host->use_new_timings) &&
+	    !of_device_is_compatible(pdev->dev.of_node,
+				     "allwinner,sun50i-h5-emmc"))
 		mmc->caps      |= MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR;
 
 	ret = mmc_of_parse(mmc);
