|
1 | 1 | --- |
2 | | -title: AVM FRITZ!Box Tools |
3 | | -description: Instructions on how to integrate AVM FRITZ!Box routers into Home Assistant. |
| 2 | +title: FRITZ!Box Tools |
| 3 | +description: Instructions on how to integrate FRITZ!Box routers into Home Assistant. |
4 | 4 | ha_category: |
5 | 5 | - Binary sensor |
6 | 6 | - Image |
@@ -31,7 +31,7 @@ related: |
31 | 31 | title: Enabling or disabling entities |
32 | 32 | --- |
33 | 33 |
|
34 | | -The AVM FRITZ!Box Tools integration allows you to control your [AVM FRITZ!Box](https://en.avm.de/products/fritzbox/) router and have presence detection for connected network devices. |
| 34 | +The FRITZ!Box Tools integration allows you to control your [FRITZ!Box](https://en.fritz.com/products/fritzbox/) router (by FRITZ!, formerly AVM) and have presence detection for connected network devices. |
35 | 35 |
|
36 | 36 | There is support for the following platform types within Home Assistant: |
37 | 37 |
|
@@ -115,7 +115,7 @@ Parental control {% term switches %} can be used to enable and disable internet |
115 | 115 |
|
116 | 116 | ### Port forward switches |
117 | 117 |
|
118 | | -Due to security reasons, AVM implemented the ability to enable/disable a port forward rule only from the host involved in the rule. As a result, this integration will create entities only for rules that have your Home Assistant host as a destination. |
| 118 | +Due to security reasons, FRITZ! implemented the ability to enable/disable a port forward rule only from the host involved in the rule. As a result, this integration will create entities only for rules that have your Home Assistant host as a destination. |
119 | 119 |
|
120 | 120 | **Note 1**: On your FRITZ!Box under **Internet** > **Permit Access**, enable the setting `Permit independent port sharing for this device` for the device which runs HA. |
121 | 121 |
|
@@ -186,7 +186,7 @@ In any case, when reporting an issue, please enable [debug logging](/docs/config |
186 | 186 | Check if one of the following cases applies: |
187 | 187 |
|
188 | 188 | - You see a device as still present, even if it is offline or disconnected for more than the configured [consider home](#consider-home) seconds. |
189 | | -- You're using additional network equipment like a network switch or Wi-Fi access point other than an AVM Fritz!Repeater or other AVM components, but not configured as a [mesh](https://en.avm.de/service/knowledge-base/dok/FRITZ-Box-7590/3329_Mesh-with-FRITZ/) in your home network. |
| 189 | +- You're using additional network equipment like a network switch or Wi-Fi access point other than a Fritz!Repeater or other FRITZ! components, but not configured as a [mesh](https://en.fritz.com//service/knowledge-base/dok/FRITZ-Box-7590/3329_Mesh-with-FRITZ/) in your home network. |
190 | 190 |
|
191 | 191 | If one of the above cases applies to your setup, try [enabling the old discovery method](#enable-old-discovery-method) in the [integration options](#integration-options). This might resolve the issue. |
192 | 192 |
|
|
0 commit comments