Feedback

I am running Domoticz for 4-5 years and was looking towards HA for a possible switch. As I started HA in a test setup to get experience with it, I configured the Energy settings. I struggled with it for over a week, but the outcome/display is not correct. I have a Sessy battery (3 x 5Kw) 1 on each phase. The battery's are externally controlled for a dynamic power use (short term). The can charge up to 2Kwh on several moments a day and can deliver up to 10Kwh and charge up to 10Kwh per day. Also I have a PV solar set, which connects to Phase 3, which van produce up to 25Kwh a day
In the dashboard the consumed/produced are the same for the battery and Grid power. Also the PV production is the same as my home consumption. I use about +- 420W per hour (+-10Kwh a day). On a sunny day like 19 June 2025, the solar production between 0500 and 2100h is about 20-25Kwh.
Like the pictures show. the power is evenly the same between grid/battery and solar/home. Where is it going wrong?

URL

https://www.home-assistant.io/docs/energy/

Version

2025.6.1

Additional information

No response

below the energy breakdown by Domoticz, which makes more sense.