Fix handling of SCRAM-SHA-256's channel binding with RSA-PSS certificates

michaelpq · michaelpq · commit 5fd61055eacf · 2023-02-15T10:12:31.000+09:00
OpenSSL 1.1.1 and newer versions have added support for RSA-PSS certificates, which requires the use of a specific routine in OpenSSL to determine which hash function to use when compiling it when using channel binding in SCRAM-SHA-256. X509_get_signature_nid(), that is the original routine the channel binding code has relied on, is not able to determine which hash algorithm to use for such certificates. However, X509_get_signature_info(), new to OpenSSL 1.1.1, is able to do it. This commit switches the channel binding logic to rely on X509_get_signature_info() over X509_get_signature_nid(), which would be the choice when building with 1.1.1 or newer. The error could have been triggered on the client or the server, hence libpq and the backend need to have their related code paths patched. Note that attempting to load an RSA-PSS certificate with OpenSSL 1.1.0 or older leads to a failure due to an unsupported algorithm. The discovery of relying on X509_get_signature_info() comes from Jacob, the tests have been written by Heikki (with few tweaks from me), while I have bundled the whole together while adding the bits needed for MSVC and meson. This issue exists since channel binding exists, so backpatch all the way down. Some tests are added in 15~, triggered if compiling with OpenSSL 1.1.1 or newer, where the certificate and key files can easily be generated for RSA-PSS. Reported-by: Gunnar "Nick" Bluth Author: Jacob Champion, Heikki Linnakangas Discussion: https://postgr.es/m/17760-b6c61e752ec07060@postgresql.org Backpatch-through: 11
diff --git a/configure b/configure
@@ -13260,6 +13260,18 @@ if test "x$ac_cv_func_CRYPTO_lock" = xyes; then :
 #define HAVE_CRYPTO_LOCK 1
 _ACEOF
 
+fi
+done
+
+  # Function introduced in OpenSSL 1.1.1.
+  for ac_func in X509_get_signature_info
+do :
+  ac_fn_c_check_func "$LINENO" "X509_get_signature_info" "ac_cv_func_X509_get_signature_info"
+if test "x$ac_cv_func_X509_get_signature_info" = xyes; then :
+  cat >>confdefs.h <<_ACEOF
+#define HAVE_X509_GET_SIGNATURE_INFO 1
+_ACEOF
+
 fi
 done
 
diff --git a/configure.ac b/configure.ac
@@ -1352,6 +1352,8 @@ if test "$with_ssl" = openssl ; then
   # thread-safety. In 1.1.0, it's no longer required, and CRYPTO_lock()
   # function was removed.
   AC_CHECK_FUNCS([CRYPTO_lock])
+  # Function introduced in OpenSSL 1.1.1.
+  AC_CHECK_FUNCS([X509_get_signature_info])
   AC_DEFINE([USE_OPENSSL], 1, [Define to 1 to build with OpenSSL support. (--with-ssl=openssl)])
 elif test "$with_ssl" != no ; then
   AC_MSG_ERROR([--with-ssl must specify openssl])
diff --git a/src/backend/libpq/be-secure-openssl.c b/src/backend/libpq/be-secure-openssl.c
@@ -1320,7 +1320,7 @@ be_tls_get_peer_serial(Port *port, char *ptr, size_t len)
 		ptr[0] = '\0';
 }
 
-#ifdef HAVE_X509_GET_SIGNATURE_NID
+#if defined(HAVE_X509_GET_SIGNATURE_NID) || defined(HAVE_X509_GET_SIGNATURE_INFO)
 char *
 be_tls_get_certificate_hash(Port *port, size_t *len)
 {
@@ -1338,10 +1338,15 @@ be_tls_get_certificate_hash(Port *port, size_t *len)
 
 	/*
 	 * Get the signature algorithm of the certificate to determine the hash
-	 * algorithm to use for the result.
+	 * algorithm to use for the result.  Prefer X509_get_signature_info(),
+	 * introduced in OpenSSL 1.1.1, which can handle RSA-PSS signatures.
 	 */
+#if HAVE_X509_GET_SIGNATURE_INFO
+	if (!X509_get_signature_info(server_cert, &algo_nid, NULL, NULL, NULL))
+#else
 	if (!OBJ_find_sigid_algs(X509_get_signature_nid(server_cert),
 							 &algo_nid, NULL))
+#endif
 		elog(ERROR, "could not determine server certificate signature algorithm");
 
 	/*
diff --git a/src/include/libpq/libpq-be.h b/src/include/libpq/libpq-be.h
@@ -300,7 +300,7 @@ extern void be_tls_get_peer_serial(Port *port, char *ptr, size_t len);
  * This is not supported with old versions of OpenSSL that don't have
  * the X509_get_signature_nid() function.
  */
-#if defined(USE_OPENSSL) && defined(HAVE_X509_GET_SIGNATURE_NID)
+#if defined(USE_OPENSSL) && (defined(HAVE_X509_GET_SIGNATURE_NID) || defined(HAVE_X509_GET_SIGNATURE_INFO))
 #define HAVE_BE_TLS_GET_CERTIFICATE_HASH
 extern char *be_tls_get_certificate_hash(Port *port, size_t *len);
 #endif
diff --git a/src/include/pg_config.h.in b/src/include/pg_config.h.in
@@ -718,6 +718,9 @@
 /* Define to 1 if you have the `writev' function. */
 #undef HAVE_WRITEV
 
+/* Define to 1 if you have the `X509_get_signature_info' function. */
+#undef HAVE_X509_GET_SIGNATURE_INFO
+
 /* Define to 1 if you have the `X509_get_signature_nid' function. */
 #undef HAVE_X509_GET_SIGNATURE_NID
 
diff --git a/src/interfaces/libpq/fe-secure-openssl.c b/src/interfaces/libpq/fe-secure-openssl.c
@@ -380,7 +380,7 @@ pgtls_write(PGconn *conn, const void *ptr, size_t len)
 	return n;
 }
 
-#ifdef HAVE_X509_GET_SIGNATURE_NID
+#if defined(HAVE_X509_GET_SIGNATURE_NID) || defined(HAVE_X509_GET_SIGNATURE_INFO)
 char *
 pgtls_get_peer_certificate_hash(PGconn *conn, size_t *len)
 {
@@ -400,10 +400,15 @@ pgtls_get_peer_certificate_hash(PGconn *conn, size_t *len)
 
 	/*
 	 * Get the signature algorithm of the certificate to determine the hash
-	 * algorithm to use for the result.
+	 * algorithm to use for the result.  Prefer X509_get_signature_info(),
+	 * introduced in OpenSSL 1.1.1, which can handle RSA-PSS signatures.
 	 */
+#if HAVE_X509_GET_SIGNATURE_INFO
+	if (!X509_get_signature_info(peer_cert, &algo_nid, NULL, NULL, NULL))
+#else
 	if (!OBJ_find_sigid_algs(X509_get_signature_nid(peer_cert),
 							 &algo_nid, NULL))
+#endif
 	{
 		appendPQExpBufferStr(&conn->errorMessage,
 							 libpq_gettext("could not determine server certificate signature algorithm\n"));
diff --git a/src/interfaces/libpq/libpq-int.h b/src/interfaces/libpq/libpq-int.h
@@ -804,7 +804,7 @@ extern ssize_t pgtls_write(PGconn *conn, const void *ptr, size_t len);
  * This is not supported with old versions of OpenSSL that don't have
  * the X509_get_signature_nid() function.
  */
-#if defined(USE_OPENSSL) && defined(HAVE_X509_GET_SIGNATURE_NID)
+#if defined(USE_OPENSSL) && (defined(HAVE_X509_GET_SIGNATURE_NID) || defined(HAVE_X509_GET_SIGNATURE_INFO))
 #define HAVE_PGTLS_GET_PEER_CERTIFICATE_HASH
 extern char *pgtls_get_peer_certificate_hash(PGconn *conn, size_t *len);
 #endif
diff --git a/src/test/ssl/README b/src/test/ssl/README
@@ -92,6 +92,7 @@ ssl/ subdirectory. The Makefile also contains a rule, "make sslfiles", to
 recreate them if you need to make changes. "make sslfiles-clean" is required
 in order to recreate the full set of keypairs and certificates. To rebuild
 separate files, touch (or remove) the files in question and run "make sslfiles".
+This step requires at least OpenSSL 1.1.1.
 
 TODO
 ====
diff --git a/src/test/ssl/conf/server-rsapss.config b/src/test/ssl/conf/server-rsapss.config
@@ -0,0 +1,14 @@
+# An OpenSSL format CSR config file for creating a server certificate.
+#
+# This is identical to server-cn-only certificate, but we specify
+# RSA-PSS as the algorithm on the command line.
+
+[ req ]
+distinguished_name     = req_distinguished_name
+prompt                 = no
+
+[ req_distinguished_name ]
+CN = common-name.pg-ssltest.test
+OU = PostgreSQL test suite
+
+# No Subject Alternative Names
diff --git a/src/test/ssl/ssl/server-rsapss.crt b/src/test/ssl/ssl/server-rsapss.crt
@@ -0,0 +1,21 @@
+-----BEGIN CERTIFICATE-----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+-----END CERTIFICATE-----
diff --git a/src/test/ssl/ssl/server-rsapss.key b/src/test/ssl/ssl/server-rsapss.key
@@ -0,0 +1,28 @@
+-----BEGIN PRIVATE KEY-----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+-----END PRIVATE KEY-----
diff --git a/src/test/ssl/sslfiles.mk b/src/test/ssl/sslfiles.mk
@@ -36,13 +36,17 @@ SERVERS := server-cn-and-alt-names \
 CLIENTS := client client-dn client-revoked client_ext
 
 #
-# To add a new non-standard key, add it to SPECIAL_KEYS and then add a recipe
-# for creating it to the "Special-case keys" section below.
+# To add a new non-standard certificate, add it to SPECIAL_CERTS and then add
+# a recipe for creating it to the "Special-case certificates" section below.
 #
+SPECIAL_CERTS := ssl/server-rsapss.crt
+
+# Likewise for non-standard keys
 SPECIAL_KEYS := ssl/server-password.key \
 	ssl/client-der.key \
 	ssl/client-encrypted-pem.key \
-	ssl/client-encrypted-der.key
+	ssl/client-encrypted-der.key \
+	ssl/server-rsapss.key
 
 #
 # These files are just concatenations of other files. You can add new ones to
@@ -65,7 +69,13 @@ CRLS := ssl/root.crl \
 	ssl/client.crl \
 	ssl/server.crl
 
-SSLFILES := $(STANDARD_CERTS) $(STANDARD_KEYS) $(SPECIAL_KEYS) $(COMBINATIONS) $(CRLS)
+SSLFILES := \
+	$(STANDARD_CERTS) \
+	$(STANDARD_KEYS) \
+	$(SPECIAL_CERTS) \
+	$(SPECIAL_KEYS) \
+	$(COMBINATIONS) \
+	$(CRLS)
 SSLDIRS := ssl/client-crldir \
 	ssl/server-crldir \
 	ssl/root+client-crldir \
@@ -85,6 +95,10 @@ sslfiles: $(SSLFILES) $(SSLDIRS)
 ssl/root_ca.crt: ssl/root_ca.key conf/root_ca.config
 	openssl req -new -x509 -config conf/root_ca.config -days 10000 -key $< -out $@
 
+# Certificate using RSA-PSS algorithm. Also self-signed.
+ssl/server-rsapss.crt: ssl/server-rsapss.key conf/server-rsapss.config
+	$(OPENSSL) req -new -x509 -config conf/server-rsapss.config -key $< -out $@
+
 #
 # Special-case keys
 #
@@ -95,6 +109,10 @@ ssl/root_ca.crt: ssl/root_ca.key conf/root_ca.config
 ssl/server-password.key: ssl/server-cn-only.key
 	openssl rsa -aes256 -in $< -out $@ -passout 'pass:secret1'
 
+# Key that uses the RSA-PSS algorithm
+ssl/server-rsapss.key:
+	$(OPENSSL) genpkey -algorithm rsa-pss -out $@
+
 # DER-encoded version of client.key
 ssl/client-der.key: ssl/client.key
 	openssl rsa -in $< -outform DER -out $@
diff --git a/src/test/ssl/t/002_scram.pl b/src/test/ssl/t/002_scram.pl
@@ -42,6 +42,10 @@ sub switch_server_cert
 # Determine whether build supports tls-server-end-point.
 my $supports_tls_server_end_point =
   check_pg_config("#define HAVE_X509_GET_SIGNATURE_NID 1");
+# Determine whether build supports detection of hash algorithms for
+# RSA-PSS certificates.
+my $supports_rsapss_certs =
+  check_pg_config("#define HAVE_X509_GET_SIGNATURE_INFO 1");
 
 # Allocation of base connection string shared among multiple tests.
 my $common_connstr;
@@ -132,4 +136,17 @@ sub switch_server_cert
 		qr/connection authenticated: identity="ssltestuser" method=scram-sha-256/
 	]);
 
+# Now test with a server certificate that uses the RSA-PSS algorithm.
+# This checks that the certificate can be loaded and that channel binding
+# works. (see bug #17760)
+if ($supports_rsapss_certs)
+{
+	switch_server_cert($node, certfile => 'server-rsapss');
+	$node->connect_ok(
+		"$common_connstr user=ssltestuser channel_binding=require",
+		"SCRAM with SSL and channel_binding=require, server certificate uses 'rsassaPss'",
+		log_like => [
+			qr/connection authenticated: identity="ssltestuser" method=scram-sha-256/
+		]);
+}
 done_testing();
diff --git a/src/tools/msvc/Solution.pm b/src/tools/msvc/Solution.pm
@@ -433,6 +433,7 @@ sub GenerateFiles
 		HAVE_WCTYPE_H                            => 1,
 		HAVE_WRITEV                              => undef,
 		HAVE_X509_GET_SIGNATURE_NID              => 1,
+		HAVE_X509_GET_SIGNATURE_INFO             => undef,
 		HAVE_X86_64_POPCNTQ                      => undef,
 		HAVE__BOOL                               => undef,
 		HAVE__BUILTIN_BSWAP16                    => undef,
@@ -553,7 +554,14 @@ sub GenerateFiles
 
 		my ($digit1, $digit2, $digit3) = $self->GetOpenSSLVersion();
 
-		# More symbols are needed with OpenSSL 1.1.0 and above.
+		# Symbols needed with OpenSSL 1.1.1 and above.
+		if (   ($digit1 >= '3' && $digit2 >= '0' && $digit3 >= '0')
+			|| ($digit1 >= '1' && $digit2 >= '1' && $digit3 >= '1'))
+		{
+			$define{HAVE_X509_GET_SIGNATURE_INFO} = 1;
+		}
+
+		# Symbols needed with OpenSSL 1.1.0 and above.
 		if (   ($digit1 >= '3' && $digit2 >= '0' && $digit3 >= '0')
 			|| ($digit1 >= '1' && $digit2 >= '1' && $digit3 >= '0'))
 		{
