Describe the bug

I'm running pi-hole in a raspberry-pi 5 with Arch Linux ARM and using the linux-rpi kernel, which is the kernel generated using this fork AFAIK.

Everything works fine when I use the kernel version 6.12.42. However, if I update the kernel to a newer version (for example 6.12.43 or 6.12.44), Pi-hole starts failing and I get errors like this:

2025-09-02 08:37:48.314 WARNING Connection error (208.67.220.220#53): failed to send UDP request (Permission Denied)

I verified that the pi-hole configuration is OK in many different ways, so the only thing that changes is the kernel version.

Steps to reproduce the behaviour

In my case:

1. install and run pi-hole
2. install a more recent version of the kernel than this one 6.12.42

Device (s)

Raspberry Pi 5

System

System Information

Raspberry Pi 5 Model B Rev 1.0
NAME="Arch Linux ARM"
PRETTY_NAME="Arch Linux ARM"
ID=archarm
ID_LIKE=arch

Linux achernar 6.12.42-1-rpi #1 SMP PREEMPT Tue Aug 19 13:15:01 MDT 2025 aarch64 GNU/Linux
Revision : b04170
Serial : 775663e2310fc836
Model : Raspberry Pi 5 Model B Rev 1.0
Throttled flag : throttled=0x0
Camera : vc_gencmd_read_response returned -1 error=1 error_msg="Command not registered"

Videocore information

2024/06/05 16:41:49
Copyright (c) 2012 Broadcom
version 6fe0b091 (release) (embedded)

vc_gencmd_read_response returned -1
error=1 error_msg="Command not registered"

Filesystem information

S.ficheros bloques de 1K Usados Disponibles Uso% Montado en
dev 975392 0 975392 0% /dev
run 1013780 1952 1011828 1% /run
/dev/mmcblk0p2 29367292 12700824 15149364 46% /
tmpfs 1013780 5152 1008628 1% /dev/shm
tmpfs 1024 0 1024 0% /run/credentials/systemd-journald.service
tmpfs 1024 0 1024 0% /run/credentials/systemd-resolved.service
tmpfs 1024 0 1024 0% /run/credentials/systemd-networkd.service
tmpfs 1013784 0 1013784 0% /tmp
/dev/mmcblk0p1 204580 60016 144564 30% /boot
/dev/sda1 1953512000 946843592 1006668408 49% /mnt/hd
tmpfs 1024 0 1024 0% /run/credentials/getty@tty1.service
tmpfs 1024 0 1024 0% /run/credentials/serial-getty@ttyAMA10.service
tmpfs 202756 4 202752 1% /run/user/1000

Filename Type Size Used Priority
/swapfile file 4194300 0 -2

Package version information

Networking Information

end0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet x.x.x.x netmask x.x.x.x broadcast x.x.x.x
inet6 y::y.y.y.y prefixlen 64 scopeid 0x20
ether m.m.m.m txqueuelen 1000 (Ethernet)
RX packets 14266 bytes 2239123 (2.1 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 13194 bytes 1897152 (1.8 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 106

lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet x.x.x.x netmask x.x.x.x
inet6 ::1 prefixlen 128 scopeid 0x10
loop txqueuelen 1000 (Local Loopback)
RX packets 3219 bytes 722018 (705.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 3219 bytes 722018 (705.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0

USB Information

/: Bus 001.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/2p, 480M
/: Bus 002.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 5000M
|__ Port 001: Dev 002, If 0, Class=Mass Storage, Driver=uas, 5000M
/: Bus 003.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/2p, 480M
/: Bus 004.Port 001: Dev 001, Class=root_hub, Driver=xhci-hcd/1p, 5000M

Display Information

Running (F)KMS, console

/sys/class/drm/card1-HDMI-A-1

/sys/class/drm/card1-HDMI-A-2

/sys/class/drm/card1-Writeback-1

/sys/class/drm/card1-Writeback-2

kmsprint is not installed. Install with: sudo apt install kms++-utils

HDMI0: HDMI_HOTPLUG = 0x00000000
HDMI1: HDMI_HOTPLUG = 0x00000000

/sys/kernel/debug/dri/1/state:
plane[46]: plane-0
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=0
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[65]: plane-1
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=0
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[81]: plane-2
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=0
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[93]: plane-3
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=0
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[105]: plane-4
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=1
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[116]: plane-5
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=2
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[127]: plane-6
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=3
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[138]: plane-7
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=4
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[149]: plane-8
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=5
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[160]: plane-9
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=6
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[171]: plane-10
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=7
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[182]: plane-11
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=8
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[193]: plane-12
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=9
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[204]: plane-13
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=a
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[215]: plane-14
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=b
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[226]: plane-15
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=c
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[237]: plane-16
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=d
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[248]: plane-17
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=e
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[259]: plane-18
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=f
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[270]: plane-19
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=10
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[281]: plane-20
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=1
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[292]: plane-21
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=2
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[303]: plane-22
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=3
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[314]: plane-23
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=4
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[325]: plane-24
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=5
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[336]: plane-25
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=6
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[347]: plane-26
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=7
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[358]: plane-27
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=8
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[369]: plane-28
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=9
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[380]: plane-29
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=a
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[391]: plane-30
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=b
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[402]: plane-31
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=c
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[413]: plane-32
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=d
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[424]: plane-33
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=e
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[435]: plane-34
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=f
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[446]: plane-35
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=10
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[457]: plane-36
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=11
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[468]: plane-37
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=12
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[479]: plane-38
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=13
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[490]: plane-39
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=14
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[501]: plane-40
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=15
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[512]: plane-41
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=16
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[523]: plane-42
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=17
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[534]: plane-43
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=18
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[545]: plane-44
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=19
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[556]: plane-45
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=1a
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[567]: plane-46
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=1b
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[578]: plane-47
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=1c
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[589]: plane-48
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=1d
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[600]: plane-49
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=1e
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[611]: plane-50
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=1f
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[622]: plane-51
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=20
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[633]: plane-52
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=11
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[644]: plane-53
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=11
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[655]: plane-54
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=11
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
plane[666]: plane-55
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=11
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
color_mgmt_changed=0
crtc[57]: mop
enable=0
active=0
self_refresh_active=0
planes_changed=0
mode_changed=0
active_changed=0
connectors_changed=0
color_mgmt_changed=0
plane_mask=0
connector_mask=0
encoder_mask=0
mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
crtc[76]: moplet
enable=0
active=0
self_refresh_active=0
planes_changed=0
mode_changed=0
active_changed=0
connectors_changed=0
color_mgmt_changed=0
plane_mask=0
connector_mask=0
encoder_mask=0
mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
crtc[92]: crtc-2
enable=0
active=0
self_refresh_active=0
planes_changed=0
mode_changed=0
active_changed=0
connectors_changed=0
color_mgmt_changed=0
plane_mask=0
connector_mask=0
encoder_mask=0
mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
crtc[104]: crtc-3
enable=0
active=0
self_refresh_active=0
planes_changed=0
mode_changed=0
active_changed=0
connectors_changed=0
color_mgmt_changed=0
plane_mask=0
connector_mask=0
encoder_mask=0
mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
connector[33]: HDMI-A-1
crtc=(null)
self_refresh_aware=0
max_requested_bpc=8
colorspace=Default
broadcast_rgb=Automatic
is_limited_range=n
output_bpc=0
output_format=RGB
tmds_char_rate=0
connector[42]: HDMI-A-2
crtc=(null)
self_refresh_aware=0
max_requested_bpc=8
colorspace=Default
broadcast_rgb=Automatic
is_limited_range=n
output_bpc=0
output_format=RGB
tmds_char_rate=0
connector[63]: Writeback-1
crtc=(null)
self_refresh_aware=0
max_requested_bpc=0
colorspace=Default
connector[79]: Writeback-2
crtc=(null)
self_refresh_aware=0
max_requested_bpc=0
colorspace=Default
HVS State
Core Clock Rate: 0
Channel 0
in use=0
load=0
Channel 1
in use=0
load=0
Channel 2
in use=0
load=0

Audio Information

pactl not installed

config.txt

arm_64bit=1
arm_boost=1
arm_freq=2400
arm_freq_min=1500
arm_peri_high=1
audio_pwm_mode=2
avs_temp=46073
camera_auto_detect=1
core_freq=910
core_freq_min=500
disable_commandline_tags=2
disable_fw_kms_setup=1
disable_l2cache=1
disable_overscan=1
display_auto_detect=1
display_default_lcd=-1
display_hdmi_rotate=-1
display_lcd_rotate=-1
dvfs=4
enable_gic=1
enable_uart=-1
force_eeprom_read=1
force_pwm_open=1
framebuffer_depth=16
framebuffer_ignore_alpha=1
framebuffer_swap=1
gpu_freq_min=500
hdmi_enable_4kp60=1
hevc_freq=910
hevc_freq_min=500
ignore_lcd=-1
init_uart_clock=0x2dc6c00
isp_freq=910
isp_freq_min=500
mask_gpu_interrupt1=16418
max_framebuffers=2
over_voltage_avs=0x184ac
pause_burst_frames=1
pciex4_reset=1
pmic_turbo_threshold=1500
program_serial_random=1
ramfsaddr=-1
total_mem=2048
v3d_freq=960
v3d_freq_min=500
vpred=8595
vpred_max=8595
hdmi_force_cec_address:0=65535
hdmi_force_cec_address:1=65535
device_tree=-
overlay_prefix=overlays/
ramfsfile=initramfs-linux.img
hdmi_cvt:0=
hdmi_cvt:1=
hdmi_edid_filename:0=
hdmi_edid_filename:1=
hdmi_timings:0=
hdmi_timings:1=

cmdline.txt

reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 smsc95xx.macaddr=2C:CF:67:7C:49:CC vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 root=/dev/mmcblk0p2 rw rootwait console=ttyAMA10,115200 console=tty1 fsck.repair=yes

pin configuration

0: ip pu | hi // ID_SDA/GPIO0 = input
1: ip pu | hi // ID_SCL/GPIO1 = input
2: no pu | -- // GPIO2 = none
3: no pu | -- // GPIO3 = none
4: no pu | -- // GPIO4 = none
5: no pu | -- // GPIO5 = none
6: no pu | -- // GPIO6 = none
7: no pu | -- // GPIO7 = none
8: no pu | -- // GPIO8 = none
9: no pd | -- // GPIO9 = none
10: no pd | -- // GPIO10 = none
11: no pd | -- // GPIO11 = none
12: no pd | -- // GPIO12 = none
13: no pd | -- // GPIO13 = none
14: no pd | -- // GPIO14 = none
15: no pd | -- // GPIO15 = none
16: no pd | -- // GPIO16 = none
17: no pd | -- // GPIO17 = none
18: no pd | -- // GPIO18 = none
19: no pd | -- // GPIO19 = none
20: no pd | -- // GPIO20 = none
21: no pd | -- // GPIO21 = none
22: no pd | -- // GPIO22 = none
23: no pd | -- // GPIO23 = none
24: no pd | -- // GPIO24 = none
25: no pd | -- // GPIO25 = none
26: no pd | -- // GPIO26 = none
27: no pd | -- // GPIO27 = none
28: ip pd | lo // PCIE_RP1_WAKE/GPIO28 = input
29: no pu | hi // FAN_TACH/GPIO29 = none
30: no pu | -- // HOST_SDA/GPIO30 = none
31: no pu | -- // HOST_SCL/GPIO31 = none
32: op dh pd | hi // ETH_RST_N/GPIO32 = output
33: no pd | lo // GPIO33 = none
34: op dl pd | lo // CD0_IO0_MICCLK/GPIO34 = output
35: no pd | lo // CD0_IO0_MICDAT0/GPIO35 = none
36: no pd | lo // RP1_PCIE_CLKREQ_N/GPIO36 = none
37: no pd | lo // GPIO37 = none
38: ip pd | hi // CD0_SDA/GPIO38 = input
39: ip pd | hi // CD0_SCL/GPIO39 = input
40: ip pd | hi // CD1_SDA/GPIO40 = input
41: ip pd | hi // CD1_SCL/GPIO41 = input
42: a2 pd | hi // USB_VBUS_EN/GPIO42 = VBUS_EN1
43: a2 pu | hi // USB_OC_N/GPIO43 = VBUS_OC1
44: op dh pd | hi // RP1_STAT_LED/GPIO44 = output
45: a0 pd | hi // FAN_PWM/GPIO45 = PWM1_CHAN3
46: op dl pd | lo // CD1_IO0_MICCLK/GPIO46 = output
47: no pd | lo // 2712_WAKE/GPIO47 = none
48: no pd | lo // CD1_IO1_MICDAT1/GPIO48 = none
49: op dl pd | lo // EN_MAX_USB_CUR/GPIO49 = output
50: no pd | -- // GPIO50 = none
51: no pd | -- // GPIO51 = none
52: no pu | -- // GPIO52 = none
53: no pu | hi // GPIO53 = none
101: op dh pu | hi // 2712_BOOT_CS_N/GPIO1 = output
102: a7 pn | hi // 2712_BOOT_MISO/GPIO2 = VC_SPI0_MISO
103: a6 pn | hi // 2712_BOOT_MOSI/GPIO3 = VC_SPI0_MOSI
104: a6 pn | lo // 2712_BOOT_SCLK/GPIO4 = VC_SPI0_SCLK
110: ip pd | lo // GPIO10 = input
111: ip pd | lo // GPIO11 = input
112: ip pd | lo // GPIO12 = input
113: ip pd | lo // GPIO13 = input
114: a1 pd | lo // PCIE_SDA/GPIO14 = SPI_S_MOSI_OR_BSC_S_SDA
115: a1 pd | lo // PCIE_SCL/GPIO15 = SPI_S_SCK_OR_BSC_S_SCL
118: ip pd | lo // GPIO18 = input
119: ip pd | lo // GPIO19 = input
120: ip pu | hi // PWR_GPIO/GPIO20 = input
121: ip pd | lo // 2712_G21_FS/GPIO21 = input
122: ip pu | hi // GPIO22 = input
123: ip pd | lo // GPIO23 = input
124: a4 pn | lo // BT_RTS/GPIO24 = UART_RTS_0
125: a4 pu | lo // BT_CTS/GPIO25 = UART_CTS_0
126: a4 pn | hi // BT_TXD/GPIO26 = UART_TXD_0
127: a4 pu | hi // BT_RXD/GPIO27 = UART_RXD_0
128: op dh pd | hi // WL_ON/GPIO28 = output
129: op dh pd | hi // BT_ON/GPIO29 = output
130: a1 pn | lo // WIFI_SDIO_CLK/GPIO30 = SD2_CLK
131: a1 pu | hi // WIFI_SDIO_CMD/GPIO31 = SD2_CMD
132: a1 pu | hi // WIFI_SDIO_D0/GPIO32 = SD2_DAT0
133: a1 pu | hi // WIFI_SDIO_D1/GPIO33 = SD2_DAT1
134: a1 pu | hi // WIFI_SDIO_D2/GPIO34 = SD2_DAT2
135: a1 pu | hi // WIFI_SDIO_D3/GPIO35 = SD2_DAT3
200: ip pd | hi // RP1_SDA/AON_GPIO0 = input
201: ip pd | hi // RP1_SCL/AON_GPIO1 = input
202: op dh pd | hi // RP1_RUN/AON_GPIO2 = output
203: op dh pd | hi // SD_IOVDD_SEL/AON_GPIO3 = output
204: op dh pd | hi // SD_PWR_ON/AON_GPIO4 = output
205: a4 pu | lo // SD_CDET_N/AON_GPIO5 = SD_CARD_PRES_G
206: ip pd | hi // SD_FLG_N/AON_GPIO6 = input
208: ip pd | lo // 2712_WAKE/AON_GPIO8 = input
209: op dh pd | hi // 2712_STAT_LED/AON_GPIO9 = output
212: ip pd | lo // PMIC_INT/AON_GPIO12 = input
213: a2 pd | hi // UART_TX_FS/AON_GPIO13 = VC_TXD0
214: a3 pd | lo // UART_RX_FS/AON_GPIO14 = VC_RXD0
232: a1 -- | hi // HDMI0_SCL/AON_SGPIO0 = HDMI_TX0_BSC_SCL
233: a1 -- | hi // HDMI0_SDA/AON_SGPIO1 = HDMI_TX0_BSC_SDA
234: a1 -- | hi // HDMI1_SCL/AON_SGPIO2 = HDMI_TX1_BSC_SCL
235: a1 -- | hi // HDMI1_SDA/AON_SGPIO3 = HDMI_TX1_BSC_SDA
236: a2 -- | hi // PMIC_SCL/AON_SGPIO4 = BSC_M2_SCL
237: a2 -- | hi // PMIC_SDA/AON_SGPIO5 = BSC_M2_SDA

vcdbg log messages

004131.628: Initial voltage 800000 temp 45523
004329.152: avs_2712: AVS pred 8595 859500 temp 46073
004329.163: vpred 859 mV +0
004951.620: FB framebuffer_swap 1
004969.345: Select resolution HDMI0/2 hotplug 0 max_mode 2
004969.361: Select resolution HDMI1/2 hotplug 0 max_mode 2
005413.424: dtb_file 'bcm2712-rpi-5-b.dtb'
005478.654: Loaded overlay 'bcm2712d0'
005616.218: Loaded overlay 'vc4-kms-v3d-pi5'
008152.146: Starting OS 8152 ms
008154.778: 00000040: -> 00000480
008154.795: 00000030: -> 00100080
008154.810: 00000034: -> 00100080
008154.826: 00000038: -> 00100080
008154.840: 0000003c: -> 00100080
008256.884: sdram: sdram refresh 2081->4162 (2)

dmesg log

[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x414fd0b1]
[ 0.000000] Linux version 6.12.42-1-rpi (builduser@leming) (aarch64-unknown-linux-gnu-gcc (GCC) 14.2.1 20250207, GNU ld (GNU Binutils) 2.44) #1 SMP PREEMPT Tue Aug 19 13:15:01 MDT 2025
[ 0.000000] KASLR enabled
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi 5 Model B Rev 1.0
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000003bc00000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x000000003bc00000..0x000000003fbfffff (65536 KiB) map reusable linux,cma
[ 0.000000] OF: reserved mem: 0x0000000000000000..0x000000000007ffff (512 KiB) nomap non-reusable atf@0
[ 0.000000] OF: reserved mem: 0x000000003fd166c0..0x000000003fd166f7 (0 KiB) nomap non-reusable nvram@0
[ 0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x7fba8740-0x7fbab43f]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000000007ffff]
[ 0.000000] node 0: [mem 0x0000000000080000-0x000000003fbfffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] On node 0, zone DMA: 1024 pages in unavailable ranges
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.2
[ 0.000000] percpu: Embedded 33 pages/cpu s95256 r8192 d31720 u135168
[ 0.000000] pcpu-alloc: s95256 r8192 d31720 u135168 alloc=33*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Virtualization Host Extensions
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: SSBS not fully self-synchronizing
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: reboot=w coherent_pool=1M 8250.nr_uarts=1 pci=pcie_bus_safe cgroup_disable=memory numa_policy=interleave nvme.max_host_mem_size_mb=0 smsc95xx.macaddr=m.m.m.m vc_mem.mem_base=0x3fc00000 vc_mem.mem_size=0x40000000 root=/dev/mmcblk0p2 rw rootwait console=ttyAMA10,115200 console=tty1 fsck.repair=yes
[ 0.000000] cgroup: Disabling memory control group subsystem
[ 0.000000] mempolicy: NUMA default policy overridden to 'interleave:0'
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Fallback order for Node 0: 0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 523264
[ 0.000000] Policy zone: DMA
[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 47946 entries in 188 pages
[ 0.000000] ftrace: allocated 188 pages with 5 groups
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000000] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000108] Console: colour dummy device 80x25
[ 0.000114] printk: legacy console [tty1] enabled
[ 0.000307] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.000316] pid_max: default: 32768 minimum: 301
[ 0.000340] LSM: initializing lsm=capability,landlock
[ 0.000408] landlock: Up and running.
[ 0.000461] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.000474] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.001421] rcu: Hierarchical SRCU implementation.
[ 0.001436] rcu: Max phase no-delay instances is 1000.
[ 0.001540] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[ 0.002047] EFI services will not be available.
[ 0.002162] smp: Bringing up secondary CPUs ...
[ 0.002424] Detected PIPT I-cache on CPU1
[ 0.002466] CPU1: Booted secondary processor 0x0000000100 [0x414fd0b1]
[ 0.002744] Detected PIPT I-cache on CPU2
[ 0.002779] CPU2: Booted secondary processor 0x0000000200 [0x414fd0b1]
[ 0.003032] Detected PIPT I-cache on CPU3
[ 0.003060] CPU3: Booted secondary processor 0x0000000300 [0x414fd0b1]
[ 0.003099] smp: Brought up 1 node, 4 CPUs
[ 0.003120] SMP: Total of 4 processors activated.
[ 0.003123] CPU: All CPU(s) started at EL2
[ 0.003128] CPU features: detected: 32-bit EL0 Support
[ 0.003132] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[ 0.003137] CPU features: detected: Common not Private translations
[ 0.003141] CPU features: detected: CRC32 instructions
[ 0.003146] CPU features: detected: RCpc load-acquire (LDAPR)
[ 0.003150] CPU features: detected: LSE atomic instructions
[ 0.003153] CPU features: detected: Privileged Access Never
[ 0.003156] CPU features: detected: RAS Extension Support
[ 0.003161] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 0.003188] alternatives: applying system-wide alternatives
[ 0.004940] CPU features: detected: Hardware dirty bit management on CPU0-3
[ 0.005176] Memory: 1945304K/2093056K available (15552K kernel code, 2528K rwdata, 5152K rodata, 2048K init, 616K bss, 76732K reserved, 65536K cma-reserved)
[ 0.005378] devtmpfs: initialized
[ 0.008468] Enabled cp15_barrier support
[ 0.008478] Enabled setend support
[ 0.008535] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.008546] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.009174] 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[ 0.009181] 0 pages in range for non-PLT usage
[ 0.009183] 517760 pages in range for PLT usage
[ 0.009251] pinctrl core: initialized pinctrl subsystem
[ 0.009447] DMI not present or invalid.
[ 0.010334] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.010846] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.011085] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.011353] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.011374] audit: initializing netlink subsys (disabled)
[ 0.011433] audit: type=2000 audit(0.008:1): state=initialized audit_enabled=0 res=1
[ 0.011585] thermal_sys: Registered thermal governor 'step_wise'
[ 0.011599] cpuidle: using governor menu
[ 0.011661] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.011697] ASID allocator initialised with 32768 entries
[ 0.011988] Serial: AMBA PL011 UART driver
[ 0.012999] /soc@107c000000/interrupt-controller@7fff9000: Fixed dependency cycle(s) with /soc@107c000000/interrupt-controller@7fff9000
[ 0.013243] bcm2835-mbox 107c013880.mailbox: mailbox enabled
[ 0.013433] 107d001000.serial: ttyAMA10 at MMIO 0x107d001000 (irq = 16, base_baud = 0) is a PL011 rev3
[ 0.013448] printk: legacy console [ttyAMA10] enabled
[ 0.800528] raspberrypi-firmware soc@107c000000:firmware: Attached to firmware from 2024-06-05T15:41:49, variant start_cd
[ 0.815548] raspberrypi-firmware soc@107c000000:firmware: Firmware hash is 6fe0b09100000000000000000000000000000000
[ 0.906069] raid6: neonx8 gen() 7936 MB/s
[ 0.978382] raid6: neonx4 gen() 7956 MB/s
[ 1.050688] raid6: neonx2 gen() 6621 MB/s
[ 1.122996] raid6: neonx1 gen() 5245 MB/s
[ 1.195326] raid6: int64x8 gen() 3473 MB/s
[ 1.267636] raid6: int64x4 gen() 3682 MB/s
[ 1.339960] raid6: int64x2 gen() 3077 MB/s
[ 1.412274] raid6: int64x1 gen() 2537 MB/s
[ 1.416557] raid6: using algorithm neonx4 gen() 7956 MB/s
[ 1.489999] raid6: .... xor() 6153 MB/s, rmw enabled
[ 1.494981] raid6: using neon recovery algorithm
[ 1.499779] bcm2835-dma 1000010000.dma: DMA legacy API manager, dmachans=0x1
[ 1.507264] iommu: Default domain type: Translated
[ 1.512082] iommu: DMA domain TLB invalidation policy: strict mode
[ 1.518424] SCSI subsystem initialized
[ 1.522228] usbcore: registered new interface driver usbfs
[ 1.527746] usbcore: registered new interface driver hub
[ 1.533087] usbcore: registered new device driver usb
[ 1.538250] pps_core: LinuxPPS API ver. 1 registered
[ 1.543234] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 1.552409] PTP clock support registered
[ 1.556710] vgaarb: loaded
[ 1.559529] clocksource: Switched to clocksource arch_sys_counter
[ 1.565767] VFS: Disk quotas dquot_6.6.0
[ 1.569714] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.578432] NET: Registered PF_INET protocol family
[ 1.583403] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 1.591580] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 1.600170] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 1.607953] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 1.615974] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 1.623652] TCP: Hash tables configured (established 16384 bind 16384)
[ 1.630312] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 1.637761] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 1.644516] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 1.651750] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 1.657570] RPC: Registered named UNIX socket transport module.
[ 1.663516] RPC: Registered udp transport module.
[ 1.668238] RPC: Registered tcp transport module.
[ 1.672958] RPC: Registered tcp-with-tls transport module.
[ 1.678463] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.684937] PCI: CLS 0 bytes, default 64
[ 1.688991] Trying to unpack rootfs image as initramfs...
[ 1.696364] kvm [1]: nv: 554 coarse grained trap handlers
[ 1.701944] kvm [1]: IPA Size Limit: 40 bits
[ 1.706269] kvm [1]: vgic interrupt IRQ9
[ 1.710228] kvm [1]: VHE mode initialized successfully
[ 1.716043] Initialise system trusted keyrings
[ 1.720619] workingset: timestamp_bits=42 max_order=19 bucket_order=0
[ 1.727312] NFS: Registering the id_resolver key type
[ 1.732390] Key type id_resolver registered
[ 1.736587] Key type id_legacy registered
[ 1.740613] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.747342] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.755074] xor: measuring software checksum speed
[ 1.760193] 8regs : 10740 MB/sec
[ 1.764869] 32regs : 10839 MB/sec
[ 1.769474] arm64_neon : 13970 MB/sec
[ 1.773845] xor: using function: arm64_neon (13970 MB/sec)
[ 1.779353] Key type asymmetric registered
[ 1.783463] Asymmetric key parser 'x509' registered
[ 1.788396] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.795915] io scheduler mq-deadline registered
[ 1.800466] io scheduler kyber registered
[ 1.804500] io scheduler bfq registered
[ 1.808811] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/interrupt-controller@7d510600, parent irq: 27)
[ 1.818923] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/interrupt-controller@7c502000, parent irq: 28)
[ 1.829027] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/intc@7d508380, parent irq: 29)
[ 1.837736] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/intc@7d508400, parent irq: 30)
[ 1.846443] irq_brcmstb_l2: registered L2 intc (/soc@107c000000/intc@7d503000, parent irq: 31)
[ 1.856628] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.874284] Freeing initrd memory: 9192K
[ 1.913639] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 1.920375] 107d50c000.serial: ttyS0 at MMIO 0x107d50c000 (irq = 33, base_baud = 6000000) is a Broadcom BCM7271 UART
[ 1.931013] serial serial0: tty port ttyS0 registered
[ 1.936468] iproc-rng200 107d208000.rng: hwrng registered
[ 1.941956] vc-mem: phys_addr:0x00000000 mem_base=0x3fc00000 mem_size:0x40000000(1024 MiB)
[ 1.950528] bcm2712-iommu-cache 1000005b00.iommuc: bcm2712_iommu_cache_probe
[ 1.959769] brd: module loaded
[ 1.964234] loop: module loaded
[ 1.967520] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 1.974957] Loading iSCSI transport class v2.0-870.
[ 1.980917] usbcore: registered new interface driver lan78xx
[ 1.986620] usbcore: registered new interface driver smsc95xx
[ 1.992485] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.998275] dwc_otg: FIQ enabled
[ 1.998277] dwc_otg: NAK holdoff enabled
[ 1.998279] dwc_otg: FIQ split-transaction FSM enabled
[ 1.998281] Module dwc_common_port init
[ 1.998576] usbcore: registered new interface driver uas
[ 2.003920] usbcore: registered new interface driver usb-storage
[ 2.010051] mousedev: PS/2 mouse device common for all mice
[ 2.024091] rpi-rtc soc@107c000000:rpi_rtc: registered as rtc0
[ 2.032486] rpi-rtc soc@107c000000:rpi_rtc: setting system clock to 2025-09-03T06:31:39 UTC (1756881099)
[ 2.042445] bcm2835-wdt bcm2835-wdt: Poweroff handler already present!
[ 2.049007] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 2.057865] sdhci: Secure Digital Host Controller Interface driver
[ 2.064073] sdhci: Copyright(c) Pierre Ossman
[ 2.068471] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.074214] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[ 2.080694] hid: raw HID events driver (C) Jiri Kosina
[ 2.085899] usbcore: registered new interface driver usbhid
[ 2.091497] usbhid: USB HID core driver
[ 2.095646] hw perfevents: enabled with armv8_cortex_a76 PMU driver, 7 (0,8000003f) counters available
[ 2.105238] NET: Registered PF_PACKET protocol family
[ 2.110360] Key type dns_resolver registered
[ 2.118513] registered taskstats version 1
[ 2.122688] Loading compiled-in X.509 certificates
[ 2.129225] Demotion targets for Node 0: null
[ 2.133763] Key type .fscrypt registered
[ 2.137711] Key type fscrypt-provisioning registered
[ 2.143115] Btrfs loaded, zoned=no, fsverity=yes
[ 2.148644] brcm-pcie 1000120000.pcie: host bridge /axi/pcie@1000120000 ranges:
[ 2.156602] brcm-pcie 1000120000.pcie: No bus range found for /axi/pcie@1000120000, using [bus 00-ff]
[ 2.166049] brcm-pcie 1000120000.pcie: MEM 0x1f00000000..0x1ffffffffb -> 0x0000000000
[ 2.174351] brcm-pcie 1000120000.pcie: MEM 0x1c00000000..0x1effffffff -> 0x0400000000
[ 2.182656] brcm-pcie 1000120000.pcie: IB MEM 0x1f00000000..0x1f003fffff -> 0x0000000000
[ 2.190958] brcm-pcie 1000120000.pcie: IB MEM 0x0000000000..0x0fffffffff -> 0x1000000000
[ 2.199258] brcm-pcie 1000120000.pcie: IB MEM 0x1000130000..0x1000130fff -> 0xfffffff000
[ 2.209032] brcm-pcie 1000120000.pcie: PCI host bridge to bus 0002:00
[ 2.215503] pci_bus 0002:00: root bus resource [bus 00-ff]
[ 2.221009] pci_bus 0002:00: root bus resource [mem 0x1f00000000-0x1ffffffffb] (bus address [0x00000000-0xfffffffb])
[ 2.231576] pci_bus 0002:00: root bus resource [mem 0x1c00000000-0x1effffffff pref] (bus address [0x400000000-0x6ffffffff])
[ 2.242766] pci 0002:00:00.0: [14e4:2712] type 01 class 0x060400 PCIe Root Port
[ 2.250107] pci 0002:00:00.0: PCI bridge to [bus 00]
[ 2.255088] pci 0002:00:00.0: bridge window [mem 0x1ff8000000-0x1ff80fffff]
[ 2.262267] pci 0002:00:00.0: PME# supported from D0 D3hot
[ 2.268338] pci 0002:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 2.379538] brcm-pcie 1000120000.pcie: clkreq-mode set to default
[ 2.385654] brcm-pcie 1000120000.pcie: link up, 5.0 GT/s PCIe x4 (!SSC)
[ 2.392310] pci 0002:01:00.0: [1de4:0001] type 00 class 0x020000 PCIe Endpoint
[ 2.399570] pci 0002:01:00.0: BAR 0 [mem 0xffffc000-0xffffffff]
[ 2.405514] pci 0002:01:00.0: BAR 1 [mem 0xffc00000-0xffffffff]
[ 2.411458] pci 0002:01:00.0: BAR 2 [mem 0xffff0000-0xffffffff]
[ 2.417473] pci 0002:01:00.0: supports D1
[ 2.421493] pci 0002:01:00.0: PME# supported from D0 D1 D3hot D3cold
[ 2.435537] pci_bus 0002:01: busn_res: [bus 01-ff] end is updated to 01
[ 2.442182] pci 0002:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff]: assigned
[ 2.450044] pci 0002:01:00.0: BAR 1 [mem 0x1f00000000-0x1f003fffff]: assigned
[ 2.457209] pci 0002:01:00.0: BAR 2 [mem 0x1f00400000-0x1f0040ffff]: assigned
[ 2.464373] pci 0002:01:00.0: BAR 0 [mem 0x1f00410000-0x1f00413fff]: assigned
[ 2.471537] pci 0002:00:00.0: PCI bridge to [bus 01]
[ 2.476517] pci 0002:00:00.0: bridge window [mem 0x1f00000000-0x1f005fffff]
[ 2.483680] pci_bus 0002:00: resource 4 [mem 0x1f00000000-0x1ffffffffb]
[ 2.490319] pci_bus 0002:00: resource 5 [mem 0x1c00000000-0x1effffffff pref]
[ 2.497394] pci_bus 0002:01: resource 1 [mem 0x1f00000000-0x1f005fffff]
[ 2.504033] pci 0002:00:00.0: Max Payload Size set to 256/ 512 (was 128), Max Read Rq 512
[ 2.512510] pci 0002:01:00.0: Max Payload Size set to 256/ 256 (was 128), Max Read Rq 512
[ 2.521038] pcieport 0002:00:00.0: enabling device (0000 -> 0002)
[ 2.527183] pcieport 0002:00:00.0: PME: Signaling with IRQ 38
[ 2.533000] pcieport 0002:00:00.0: AER: enabled with IRQ 38
[ 2.538649] rp1 0002:01:00.0: bar0 len 0x4000, start 0x1f00410000, end 0x1f00413fff, flags, 0x40200
[ 2.547735] rp1 0002:01:00.0: bar1 len 0x400000, start 0x1f00000000, end 0x1f003fffff, flags, 0x40200
[ 2.557003] rp1 0002:01:00.0: enabling device (0000 -> 0002)
[ 2.563360] rp1 0002:01:00.0: chip_id 0x20001927
[ 2.572174] genirq: irq_chip rp1_irq_chip did not update eff. affinity mask of irq 100
[ 2.595370] macb 1f00100000.ethernet eth0: Cadence GEM rev 0x00070109 at 0x1f00100000 irq 106 (m.m.m.m)
[ 2.606488] dw_axi_dmac_platform 1f00188000.dma: DesignWare AXI DMA Controller, 8 channels
[ 2.615030] xhci-hcd xhci-hcd.0: xHCI Host Controller
[ 2.620108] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 1
[ 2.647951] xhci-hcd xhci-hcd.0: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000808000000810
[ 2.656958] xhci-hcd xhci-hcd.0: irq 131, io mem 0x1f00200000
[ 2.662787] xhci-hcd xhci-hcd.0: xHCI Host Controller
[ 2.667857] xhci-hcd xhci-hcd.0: new USB bus registered, assigned bus number 2
[ 2.675108] xhci-hcd xhci-hcd.0: Host supports USB 3.0 SuperSpeed
[ 2.681259] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 2.689560] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.696812] usb usb1: Product: xHCI Host Controller
[ 2.701704] usb usb1: Manufacturer: Linux 6.12.42-1-rpi xhci-hcd
[ 2.707732] usb usb1: SerialNumber: xhci-hcd.0
[ 2.712285] hub 1-0:1.0: USB hub found
[ 2.716056] hub 1-0:1.0: 2 ports detected
[ 2.720180] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
[ 2.728492] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.735743] usb usb2: Product: xHCI Host Controller
[ 2.740636] usb usb2: Manufacturer: Linux 6.12.42-1-rpi xhci-hcd
[ 2.746665] usb usb2: SerialNumber: xhci-hcd.0
[ 2.751215] hub 2-0:1.0: USB hub found
[ 2.754988] hub 2-0:1.0: 1 port detected
[ 2.759184] xhci-hcd xhci-hcd.1: xHCI Host Controller
[ 2.764260] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 3
[ 2.771940] xhci-hcd xhci-hcd.1: hcc params 0x0240fe6d hci version 0x110 quirks 0x0000808000000810
[ 2.780951] xhci-hcd xhci-hcd.1: irq 136, io mem 0x1f00300000
[ 2.786775] xhci-hcd xhci-hcd.1: xHCI Host Controller
[ 2.791845] xhci-hcd xhci-hcd.1: new USB bus registered, assigned bus number 4
[ 2.799095] xhci-hcd xhci-hcd.1: Host supports USB 3.0 SuperSpeed
[ 2.805277] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[ 2.813579] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.820831] usb usb3: Product: xHCI Host Controller
[ 2.825724] usb usb3: Manufacturer: Linux 6.12.42-1-rpi xhci-hcd
[ 2.831752] usb usb3: SerialNumber: xhci-hcd.1
[ 2.836280] hub 3-0:1.0: USB hub found
[ 2.840049] hub 3-0:1.0: 2 ports detected
[ 2.844179] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.12
[ 2.852480] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.859779] usb usb4: Product: xHCI Host Controller
[ 2.864694] usb usb4: Manufacturer: Linux 6.12.42-1-rpi xhci-hcd
[ 2.870781] usb usb4: SerialNumber: xhci-hcd.1
[ 2.875305] hub 4-0:1.0: USB hub found
[ 2.879073] hub 4-0:1.0: 1 port detected
[ 2.883843] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 2.892193] bcm2712-iommu 1000005100.iommu: bcm2712_iommu_probe: Success
[ 2.899238] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 2.907586] bcm2712-iommu 1000005200.iommu: bcm2712_iommu_probe: Success
[ 2.914657] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_init: DEBUG_INFO = 0x20804774
[ 2.923058] bcm2712-iommu 1000005280.iommu: bcm2712_iommu_probe: Success
[ 2.929936] sdhci-brcmstb 1000fff000.mmc: Got CD GPIO
[ 2.931795] mmc1: CQHCI version 5.10
[ 2.935188] mmc0: CQHCI version 5.10
[ 2.940494] of_cfs_init
[ 2.944710] of_cfs_init: OK
[ 2.947704] clk: Disabling unused clocks
[ 2.960116] PM: genpd: Disabling unused power domains
[ 2.983260] mmc0: SDHCI controller on 1000fff000.mmc [1000fff000.mmc] using ADMA 64-bit
[ 3.087626] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd
[ 3.095580] mmc0: new ultra high speed SDR104 SDHC card at address 5048
[ 3.102419] mmcblk0: mmc0:5048 SD32G 28.8 GiB
[ 3.108138] mmcblk0: p1 p2
[ 3.111064] mmcblk0: mmc0:5048 SD32G 28.8 GiB
[ 3.118271] usb 2-1: New USB device found, idVendor=152d, idProduct=0578, bcdDevice= 4.07
[ 3.126484] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.133739] usb 2-1: Product: External Disk 3.0
[ 3.134067] mmc1: SDHCI controller on 1001100000.mmc [1001100000.mmc] using ADMA 64-bit
[ 3.138290] usb 2-1: Manufacturer: JMicron
[ 3.150430] usb 2-1: SerialNumber: 0000000045A9
[ 3.151754] Freeing unused kernel memory: 2048K
[ 3.158570] scsi host0: uas
[ 3.159626] Run /init as init process
[ 3.162926] scsi 0:0:0:0: Direct-Access JMicron Tech 0407 PQ: 0 ANSI: 6
[ 3.166005] with arguments:
[ 3.166006] /init
[ 3.174133] with environment:
[ 3.174134] HOME=/
[ 3.174135] TERM=linux
[ 3.184491] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 3.189221] mmc1: new ultra high speed DDR50 SDIO card at address 0001
[ 3.192341] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 3.204356] sd 0:0:0:0: [sda] Write Protect is off
[ 3.209171] sd 0:0:0:0: [sda] Mode Sense: 53 00 00 08
[ 3.209517] sd 0:0:0:0: [sda] Disabling FUA
[ 3.213724] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.275777] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 3.282083] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a multiple of preferred minimum block size (4096 bytes)
[ 3.305918] input: pwr_button as /devices/platform/pwr_button/input/input0
[ 3.328019] sda: sda1
[ 3.330500] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.372116] v3d 1002000000.v3d: [drm] Transparent Hugepage support is recommended for optimal performance on this platform!
[ 3.383825] [drm] Initialized v3d 1.0.0 for 1002000000.v3d on minor 0
[ 3.403944] vc4_hvs 107c580000.hvs: bcm2712_iommu_of_xlate: MMU 1000005200.iommu
[ 3.411385] vc4_hvs 107c580000.hvs: bcm2712_iommu_probe_device: MMU 1000005200.iommu
[ 3.419163] vc4_hvs 107c580000.hvs: bcm2712_iommu_device_group: MMU 1000005200.iommu
[ 3.426939] vc4_hvs 107c580000.hvs: Adding to iommu group 1
[ 3.432533] vc4_hvs 107c580000.hvs: bcm2712_iommu_attach_dev: MMU 1000005200.iommu
[ 3.441596] vc4-drm axi:gpu: bcm2712_iommu_of_xlate: MMU 1000005200.iommu
[ 3.448441] vc4-drm axi:gpu: bcm2712_iommu_probe_device: MMU 1000005200.iommu
[ 3.455614] vc4-drm axi:gpu: bcm2712_iommu_device_group: MMU 1000005200.iommu
[ 3.462779] vc4-drm axi:gpu: Adding to iommu group 1
[ 3.467760] vc4-drm axi:gpu: bcm2712_iommu_attach_dev: MMU 1000005200.iommu
[ 3.476970] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
[ 3.633636] EXT4-fs (mmcblk0p2): mounted filesystem 6dfbd26a-ae1a-4be2-81d9-0466da9b3738 r/w with ordered data mode. Quota mode: none.
[ 3.953371] NET: Registered PF_INET6 protocol family
[ 3.958726] Segment Routing with IPv6
[ 3.962411] In-situ OAM (IOAM) with IPv6
[ 3.994657] systemd[1]: systemd 257.8-2-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +IPE +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK -BTF +XKBCOMMON +UTMP -SYSVINIT +LIBARCHIVE)
[ 4.028813] systemd[1]: Detected architecture arm64.
[ 4.041208] systemd[1]: Hostname set to .
[ 4.147669] systemd[1]: bpf-restrict-fs: BPF LSM hook not enabled in the kernel, BPF LSM not supported.
[ 4.484240] systemd[1]: Queued start job for default target Graphical Interface.
[ 4.514148] systemd[1]: Created slice CUPS Slice.
[ 4.519206] systemd[1]: Created slice Slice /system/dirmngr.
[ 4.525132] systemd[1]: Created slice Slice /system/getty.
[ 4.530877] systemd[1]: Created slice Slice /system/gpg-agent.
[ 4.536964] systemd[1]: Created slice Slice /system/gpg-agent-browser.
[ 4.543753] systemd[1]: Created slice Slice /system/gpg-agent-extra.
[ 4.550356] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
[ 4.556789] systemd[1]: Created slice Slice /system/keyboxd.
[ 4.562700] systemd[1]: Created slice Slice /system/modprobe.
[ 4.568704] systemd[1]: Created slice Slice /system/serial-getty.
[ 4.574966] systemd[1]: Created slice User and Session Slice.
[ 4.580822] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 4.588839] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 4.596616] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.606105] systemd[1]: Expecting device /dev/mmcblk0p1...
[ 4.611644] systemd[1]: Expecting device /dev/sda1...
[ 4.616739] systemd[1]: Expecting device /dev/ttyAMA10...
[ 4.622189] systemd[1]: Reached target Local Encrypted Volumes.
[ 4.628174] systemd[1]: Reached target Local Integrity Protected Volumes.
[ 4.635035] systemd[1]: Reached target Remote File Systems.
[ 4.640660] systemd[1]: Reached target Slice Units.
[ 4.645606] systemd[1]: Reached target Local Verity Protected Volumes.
[ 4.652249] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.660730] systemd[1]: Listening on Process Core Dump Socket.
[ 4.667993] systemd[1]: Listening on Credential Encryption/Decryption.
[ 4.674662] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.680716] systemd[1]: Listening on Journal Sockets.
[ 4.685917] systemd[1]: Listening on Network Service Netlink Socket.
[ 4.692345] systemd[1]: TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 4.703799] systemd[1]: Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 4.715216] systemd[1]: Listening on udev Control Socket.
[ 4.720707] systemd[1]: Listening on udev Kernel Socket.
[ 4.726150] systemd[1]: Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[ 4.740613] systemd[1]: Mounting POSIX Message Queue File System...
[ 4.779700] systemd[1]: Mounting Kernel Debug File System...
[ 4.786110] systemd[1]: Mounting Kernel Trace File System...
[ 4.792805] systemd[1]: Starting Create List of Static Device Nodes...
[ 4.800309] systemd[1]: Starting Load Kernel Module configfs...
[ 4.807167] systemd[1]: Starting Load Kernel Module dm_mod...
[ 4.813861] systemd[1]: Starting Load Kernel Module drm...
[ 4.820323] systemd[1]: Starting Load Kernel Module fuse...
[ 4.826901] systemd[1]: Starting Load Kernel Module loop...
[ 4.832690] systemd[1]: Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[ 4.833327] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[ 4.852580] fuse: init (API version 7.41)
[ 4.865315] systemd[1]: Starting Journal Service...
[ 4.872442] systemd[1]: Starting Load Kernel Modules...
[ 4.878673] systemd[1]: Starting Generate network units from Kernel command line...
[ 4.886498] systemd[1]: TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 4.899696] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 4.907712] systemd[1]: Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[ 4.916978] systemd-journald[261]: Collecting audit messages is disabled.
[ 4.919840] systemd[1]: Starting Load udev Rules from Credentials...
[ 4.933208] systemd[1]: Starting Coldplug All udev Devices...
[ 4.940849] systemd[1]: Mounted POSIX Message Queue File System.
[ 4.947242] systemd[1]: Started Journal Service.
[ 5.005949] Adding 4194300k swap on /swapfile. Priority:-2 extents:115 across:19234816k SS
[ 5.014542] systemd-journald[261]: Received client request to flush runtime journal.
[ 5.880308] macb 1f00100000.ethernet end0: renamed from eth0
[ 5.898294] rpi-gpiomem 107d508500.gpiomem: window base 0x107d508500 size 0x00000040
[ 5.909439] rpi-gpiomem 107d508500.gpiomem: initialised 1 regions as /dev/gpiomem1
[ 5.917158] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
[ 5.917659] rpi-gpiomem 107d517c00.gpiomem: window base 0x107d517c00 size 0x00000040
[ 5.931883] rpi-gpiomem 107d517c00.gpiomem: initialised 1 regions as /dev/gpiomem2
[ 5.939579] rpi-gpiomem 107d504100.gpiomem: window base 0x107d504100 size 0x00000020
[ 5.947428] rpi-gpiomem 107d504100.gpiomem: initialised 1 regions as /dev/gpiomem3
[ 5.955055] rpi-gpiomem 107d510700.gpiomem: window base 0x107d510700 size 0x00000020
[ 5.962884] rpi-gpiomem 107d510700.gpiomem: initialised 1 regions as /dev/gpiomem4
[ 5.970624] rpi-gpiomem 1f000d0000.gpiomem: window base 0x1f000d0000 size 0x00030000
[ 5.978497] rpi-gpiomem 1f000d0000.gpiomem: initialised 1 regions as /dev/gpiomem0
[ 6.034925] brcmstb-i2c 107d508200.i2c: @97500hz registered in interrupt mode
[ 6.042421] brcmstb-i2c 107d508280.i2c: @97500hz registered in interrupt mode
[ 6.052893] mc: Linux media interface: v0.10
[ 6.095898] videodev: Linux video capture interface: v2.00
[ 6.119306] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.132801] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 6.134394] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 6.141704] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 6.160231] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.166353] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 6.168119] Bluetooth: Core ver 2.22
[ 6.178062] NET: Registered PF_BLUETOOTH protocol family
[ 6.183409] Bluetooth: HCI device and connection manager initialized
[ 6.183791] pispbe 1000880000.pisp_be: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[ 6.189820] Bluetooth: HCI socket layer initialized
[ 6.197561] pispbe 1000880000.pisp_be: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[ 6.202408] Bluetooth: L2CAP socket layer initialized
[ 6.210457] pispbe 1000880000.pisp_be: bcm2712_iommu_device_group: MMU 1000005100.iommu
[ 6.223826] pispbe 1000880000.pisp_be: Adding to iommu group 0
[ 6.229768] pispbe 1000880000.pisp_be: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[ 6.233065] Bluetooth: SCO socket layer initialized
[ 6.238111] rpi-hevc-dec 1000800000.codec: bcm2712_iommu_of_xlate: MMU 1000005100.iommu
[ 6.244969] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 6.250636] rpi-hevc-dec 1000800000.codec: bcm2712_iommu_probe_device: MMU 1000005100.iommu
[ 6.256236] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 6.259045] rpi-hevc-dec 1000800000.codec: bcm2712_iommu_device_group: MMU 1000005100.iommu
[ 6.268094] usbcore: registered new interface driver brcmfmac
[ 6.276127] rpi-hevc-dec 1000800000.codec: Adding to iommu group 0
[ 6.289435] rpi-hevc-dec 1000800000.codec: bcm2712_iommu_attach_dev: MMU 1000005100.iommu
[ 6.294945] macb 1f00100000.ethernet end0: PHY [1f00100000.ethernet-ffffffff:01] driver [Broadcom BCM54213PE] (irq=POLL)
[ 6.309152] Bluetooth: HCI UART driver ver 2.3
[ 6.309158] Bluetooth: HCI UART protocol H4 registered
[ 6.309182] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 6.309419] macb 1f00100000.ethernet end0: configuring for phy/rgmii-id link mode
[ 6.314164] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 6.315041] rpi-hevc-dec 1000800000.codec: Device registered as /dev/video19
[ 6.315687] Bluetooth: HCI UART protocol Broadcom registered
[ 6.321818] macb 1f00100000.ethernet: gem-ptp-timer ptp clock registered.
[ 6.325416] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 6.605797] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[ 6.613707] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Aug 29 2023 01:47:08 version 7.45.265 (28bca26 CY) FWID 01-b677b91b
[ 6.711936] Bluetooth: hci0: BCM: chip id 107
[ 6.716799] Bluetooth: hci0: BCM: features 0x2f
[ 6.722693] Bluetooth: hci0: BCM4345C0
[ 6.726735] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 6.737444] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.hcd' Patch
[ 6.926147] vc4-drm axi:gpu: bound 107c580000.hvs (ops vc4_hvs_ops [vc4])
[ 6.933523] rp1-pio 1f00178000.pio: failed to contact RP1 firmware
[ 6.934257] Registered IR keymap rc-cec
[ 6.939736] rp1-pio 1f00178000.pio: probe with driver rp1-pio failed with error -2
[ 6.951353] rc rc0: vc4-hdmi-0 as /devices/platform/soc@107c000000/107c701400.hdmi/rc/rc0
[ 6.959675] input: vc4-hdmi-0 as /devices/platform/soc@107c000000/107c701400.hdmi/rc/rc0/input1
[ 6.970669] input: vc4-hdmi-0 HDMI Jack as /devices/platform/soc@107c000000/107c701400.hdmi/sound/card0/input2
[ 6.982315] vc4-drm axi:gpu: bound 107c701400.hdmi (ops vc4_hdmi_ops [vc4])
[ 6.992041] Registered IR keymap rc-cec
[ 6.996202] rc rc1: vc4-hdmi-1 as /devices/platform/soc@107c000000/107c706400.hdmi/rc/rc1
[ 7.004737] input: vc4-hdmi-1 as /devices/platform/soc@107c000000/107c706400.hdmi/rc/rc1/input3
[ 7.015822] input: vc4-hdmi-1 HDMI Jack as /devices/platform/soc@107c000000/107c706400.hdmi/sound/card1/input4
[ 7.027150] vc4-drm axi:gpu: bound 107c706400.hdmi (ops vc4_hdmi_ops [vc4])
[ 7.034295] vc4-drm axi:gpu: bound 107c500000.mop (ops vc4_txp_ops [vc4])
[ 7.041197] vc4-drm axi:gpu: bound 107c501000.moplet (ops vc4_txp_ops [vc4])
[ 7.048343] vc4-drm axi:gpu: bound 107c410000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 7.055916] vc4-drm axi:gpu: bound 107c411000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 7.064185] [drm] Initialized vc4 0.0.0 for axi:gpu on minor 1
[ 7.072645] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes
[ 7.082205] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes
[ 7.091227] vc4-drm axi:gpu: [drm] Cannot find any crtc or sizes
[ 7.480168] Bluetooth: hci0: BCM: features 0x2f
[ 7.486152] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
[ 7.492362] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
[ 7.498634] Bluetooth: hci0: BCM: Using default device address (m.m.m.m)
[ 10.413564] macb 1f00100000.ethernet end0: Link is Up - 1Gbps/Full - flow control off

EEPROM

Logs

No response

Additional context

No response