Yeast extract, gelatin, Potassium nitrate (KNO3) and Sodium nitrate (
NaNO3) at different concentration (2 g, 4 g, 6 g, 8 g and 10 g) were added to the basal medium separately, autoclaved at 121C for 15 minutes.
CM5: Sucrose 40, Corn steep liquor 30,
NaNO3 3, KH2PO4 0.5, Epsom salt 0.05, CaCO3 2.5 [9].
Se preparo agar mineral Siegmund y Wagner (Agar SW: Glicerol 20 g/L, K[H.sub.2]P[O.sub.4] 0.7 g/L, [Na.sub.2]P[O.sub.4] x 2[H.sub.2] 0.9 g/L,
NaNO3 2 g/L, mgS[O.sub.4] x [H.sub.2] 0.4 g/L, CaCl^Hp 0.1 g/L, solucion de elementos traza 2 mL/L y agar-agar 17 g/L) suplementado con 0.005 g/L de azul de metileno (MB) y 0.2 g/L de cetiltrimetilamonio bromuro (CTAB).
Picric acid Mn(NO3)24H2O Co(NO3)26H2O Cu(NO3)23H2O Zn(NO3)26H2O Pb(NO3)2 HNO3
NaNO3 CH3COOH CH3COONa dichloromethane and chloroform were purchased from Merck.
Originally, the sorption properties of fabricated materials were characterized by the distribution coefficient (Kd) in the solution of 5 g/L
NaNO3 with the cesium content of 20 mg/L.
0.01mol
NaNO3 was added into the flask under vigorous stirring on a magnetic stirrer.
For total flavonoids determination, a sample (1 mL) was mixed with
NaNO3 (0.3 mL) in a test tube covered with aluminium foil and left for 5 minutes.
coli strains carrying the corresponding vectors were grown at 37[degrees] C in LB-medium (aerobic growth conditions) or LB-medium containing 20 mM
NaNO3 (anaerobic growth conditions) supplemented with appropriate antibiotics.
Substrate also contained a nutritious solution of (g [L.sup.-1] of distilled water): MgSO4.7H2O (0.5),
NaNO3 (3.0), K[H.sub.2]P[O.sub.4] (1.0), yeast extract (1.0) and peptone (0.3).
The processor core is the ATmega168 (Nano2.x) and ATmega328 (
Nano3.0) and it also has 14 digital input/ output port (6 of which can be used as PWM outputs), 8 analog inputs, a 16MHz crystal oscillator, a mini-B USB port, an ICSP header, and a reset button.
They used a specially designed cathodic helical gear tool,
NaNO3 as electrolyte, inter-electrode gap (IEG) of 0.4 mm, and voltage in the range of 10-15V.
Lev 0,52 [UI/mL] 0,07
NaNO3 0,29 [UI/mL] 0,1 Urea 0,4 [UI/mL] 0,04 Cel.
The least removal efficiency was obtained with
NaNO3 of 67 %.
(2008) have investigated on ECH of spur gears using different combinations of
NaNO3 and NaCl as electrolyte.
