default search action
Google
Google Scholar
Semantic Scholar
Internet Archive Scholar
CiteSeerX
ORCIDAPMS 2012: Rhodes, Greece
- Christos Emmanouilidis
, Marco Taisch, Dimitris Kiritsis:
Advances in Production Management Systems. Competitive Manufacturing for Innovative Products and Services - IFIP WG 5.7 International Conference, APMS 2012, Rhodes, Greece, September 24-26, 2012, Revised Selected Papers, Part I. IFIP Advances in Information and Communication Technology 397, Springer 2013, ISBN 978-3-642-40351-4
Sustainability
- Gökan May, Marco Taisch, Bojan Stahl, Vahid Sadr:
Toward Energy Efficient Manufacturing: A Study on Practices and Viewpoint of the Industry. 1-8 - Ulrich Brandenburg, Sebastian Kropp, Jorge Sunyer, Daniel Batalla-Navarro:
Energy Efficient Production through a Modified-Green-PPC and a Communication Framework for the Energy Supply Chain to Manage Energy Consumption and Information. 9-16 - Tao Peng, Xun Xu, Juhani Heilala:
Energy-Efficient Machining via Energy Data Integration. 17-24 - Hendro Wicaksono, Kiril Aleksandrov, Sven Rogalski, Jivka Ovtcharova:
An ICT Supported Holistic Approach for Qualitative and Quantitative Energy Efficiency Evaluation in Manufacturing Company. 25-32 - Antonella Meneghetti, Luca Monti:
How Energy Recovery Can Reshape Storage Assignment in Automated Warehouses. 33-40 - Hyun Woo Jeon, Vittaldas V. Prabhu:
Modeling Green Fabs - A Queuing Theory Approach for Evaluating Energy Performance. 41-48 - Egon Müller, Hendrik Hopf, Manuela Krones:
Analyzing Energy Consumption for Factory and Logistics Planning Processes. 49-56 - Simone Zanoni, Laura Bettoni, Christoph H. Glock:
Energy Implications in the Single-Vendor Single-Buyer Integrated Production Inventory Model. 57-64 - Gerrit Bogdanski, Malte Schönemann, Sebastian Thiede, Stefan Andrew, Christoph Herrmann:
An Extended Energy Value Stream Approach Applied on the Electronics Industry. 65-72 - Marc Allan Redecker, Klaus-Dieter Thoben:
An Approach for Energy Saving in the Compound Feed Production. 73-79 - Manuel Rippel, Olga Willner, Johannes Plehn, Paul Schönsleben:
Bridging the Gap between Energy Management Systems and Machine Tools - Embedded Energy Efficiency in Production Planning and Control. 80-87 - Connor Upton, Fergus Quilligan, Carlos García-Santiago, Asier González González:
Energy Efficient Production Planning - A Joint Cognitive Systems Approach. 88-95 - Giovanni Miragliotta, Fadi Shrouf:
Using Internet of Things to Improve Eco-efficiency in Manufacturing: A Review on Available Knowledge and a Framework for IoT Adoption. 96-102 - Ying Liu, Niels Lohse, Sanja Petrovic, Nabil Gindy:
An Investigation into Minimising Total Energy Consumption, Total Energy Cost and Total Tardiness Based on a Rolling Blackout Policy in a Job Shop. 103-110 - Marco Taisch, Bojan Stahl:
Requirements Analysis and Definition for Eco-factories: The Case of EMC2. 111-118 - Paolo Calefati, John Pandremenos, Apostolos Fysikopoulos, George Chryssolouris:
Energy Efficient Process Planning System - The ENEPLAN Project. 119-126 - Iñigo Mendikoa, Mikel Sorli, Alberto Armijo, Laura García, Luis Erausquin, Mario Insunza, Jon Bilbao, Hakan Fridén, Anders Björk, Linus Bergfors, Romualdas Skema, Robertas Alzbutas, Tomas Iesmantas:
Energy Efficiency Optimisation in Heat Treatment Process Design. 127-134 - Björn Johansson, Jon Andersson, Erik Lindskog, Jonatan Berglund, Anders Skoogh:
Evaluation and Calculation of Dynamics in Environmental Impact Assessment. 135-141 - Juhani Heilala, Marja Paju, Jari Montonen, Reino Ruusu, Mikel Sorli, Alberto Armijo, Pablo Bermell-Garcia, Simon Astwood, Santiago Quintana-Amate:
Discrete Part Manufacturing Energy Efficiency Improvements with Modelling and Simulation. 142-150 - Julien Maheut, José Pedro García-Sabater:
A Parallelizable Heuristic for Solving the Generic Materials and Operations Planning in a Supply Chain Network: A Case Study from the Automotive Industry. 151-157 - Peter David Ball, Melanie Despeisse, Steve Evans, Rick M. Greenough, Steve B. Hope, Ruth Kerrigan, Andrew Levers, Peter Lunt, Vincent Murray, Mike R. Oates, Richard Quincey, Li Shao, Timothy Waltniel, Andrew J. Wright:
Factory Modelling: Combining Energy Modelling for Buildings and Production Systems. 158-165 - Maria Holgado, Donatella Corti, Marco Macchi, Padmakshi Rana, Samuel W. Short, Steve Evans:
Business Modelling for Sustainable Manufacturing. 166-174 - Samuel W. Short, Padmakshi Rana, Nancy M. P. Bocken, Steve Evans:
Embedding Sustainability in Business Modelling through Multi-stakeholder Value Innovation. 175-183 - Teuvo Uusitalo, Markku Reunanen, Katri Valkokari, Pasi Valkokari, Katariina Palomäki:
Toward Sustainability Governance in Manufacturing Networks. 184-191 - Liliyana Makarova Jørsfeldt, Peter Meulengracht Jensen, Brian Vejrum Wæhrens:
Implementation of Sustainability in Ongoing Supply Chain Operations. 192-199 - Carlo Brondi, Rosanna Fornasiero, Manfredi Vale, Ludovico Vidali, Federico Brugnoli:
Modular Framework for Reliable LCA-Based Indicators Supporting Supplier Selection within Complex Supply Chains. 200-207 - Lukas Chabada, Heidi Carin Dreyer, Anita Romsdal, Daryl John Powell:
Sustainable Food Supply Chains: Towards a Framework for Waste Identification. 208-215 - Vito Albino, Achille Claudio Garavelli, Vincenzo Alessio Romano:
A Classification of Industrial Symbiosis Networks: A Focus on Materials and Energy Recovery. 216-223 - Merve Kiliç, Seren Özmehmet Tasan:
Performance Evaluation in Sustainability Conscious Manufacturing Companies by Using TOPSIS Method. 224-231 - Fredy Huaylla, Lamia Berrah, Vincent Clivillé:
A Decision-Aiding Approach for Residential PhotoVoltaic System Choice: An Application to the French Context. 232-239 - Eryk Glodzinski:
Design of Controlling Supported Sustainability of Manufacturing Enterprises. 240-249
Design, Manufacturing and Production Management
- Bjørnar Henriksen, Lars Skjelstad, Eva Amdahl Seim, Carl Christian Røstad:
Modularization - Enabler for Shop Floor Involvement in Improvement and Development. 250-261 - Peter Nielsen, Thomas Ditlev Brunoe:
Comparison of Criticality of Configuration Choices for Market Price and Product Cost. 262-269 - Nico Vandaele, Catherine J. Decouttere:
The Multiple Faces of Mass Customization: Product Design, Process Design and Supply Chain Design. 270-277 - Olga Willner, Manuel Rippel, Matthias Wandfluh, Paul Schönsleben:
Development of a Business Process Matrix for Structuring the Implications of Using Configurators in an Engineer-To-Order Environment. 278-285 - Guenther Schuh, Till Potente, Christina Thomas, Stephan Schmitz:
Designing Rotationally Symmetric Products for Multi-variant Mass Production by Using Production-Technical Solution Space. 286-293 - Ingrid Paoletti, Roberto Stefano Naboni:
Robotics in the Construction Industry: Mass Customization or Digital Crafting? 294-300 - Dimitris Mourtzis, Michalis Doukas, Foivos Psarommatis:
Simulation-Based Design of Production Networks for Manufacturing of Personalised Products. 301-309 - Golboo Pourabdollahian, Donatella Corti, Chiara Galbusera, Julio Cesar Kostycz Silva:
An Empirical Based Proposal for Mass Customization Business Model in Footwear Industry. 310-317 - Kuo Wei Chen, Richard Lee Storch:
Mass Customized Large Scale Production System with Learning Curve Consideration. 318-325 - Georg Heinecke, Jonathan Köber, Raffaello Lepratti, Steffen Lamparter, Andreas M. Kunz:
Event-Driven Order Rescheduling Model for Just-In-Sequence Deliveries to a Mixed-Model Assembly Line. 326-333 - Eva A. Coscia, Michele Sesana, Rosanna Fornasiero:
Support to Order Management and Collaborative Production of Customised Garments for Specific Target Groups. 334-341 - Paolo Pedrazzoli, Marino Alge, Andrea Bettoni, Luca Canetta:
Modeling and Simulation Tool for Sustainable MC Supply Chain Design and Assessment. 342-349 - Matteo Mario Savino, Antonio Mazza:
Agent Based Resources Allocation in Job Shop with Re-entrant Features: A Benchmarking Analysis. 350-358 - Seng Tat Chua, Masaru Nakano:
Design of a Taxation System to Promote Electric Vehicles in Singapore. 359-367 - Robert Furian, Frank von Lacroix, Dragan Stokic, Ana Correia, Cristina Grama, Stefan Faltus, Maksim Maksimovic, Karl-Heinrich Grote, Christiane Beyer:
Knowledge Management in Set Based Lean Product Development Process. 368-375 - Dimitris Kiritsis, Soumaya El Kadiri, Apostolos Perdikakis, Ana Milicic, Dimitrios Alexandrou, Konstantinos V. Pardalis:
Design of Fundamental Ontology for Manufacturing Product Lifecycle Applications. 376-382 - Monica Rossi, Sergio Terzi, Marco Garetti:
Proposal of an Assessment Model for New Product Development. 383-390 - Daniele Cerri, Marco Taisch, Sergio Terzi:
Multi-objective Optimization of Product Life-Cycle Costs and Environmental Impacts. 391-396 - Mohand Lounes Bentaha, Olga Battaïa, Alexandre Dolgui:
A Stochastic Formulation of the Disassembly Line Balancing Problem. 397-404 - Joaquín Bautista, Rocío Alfaro, Alberto Cano:
Incorporating Regularity of Required Workload to the MMSP-W with Serial Workstations and Free Interruption of the Operations. 405-412 - Joaquín Bautista, Cristina Batalla, Rocío Alfaro:
Incorporating Ergonomics Factors into the TSALBP. 413-420 - Jessica Bruch, Monica Bellgran:
Critical Factors for Successful User-Supplier Integration in the Production System Design Process. 421-428 - Elzbieta Pawlik, Winifred Ijomah, Jonathan R. Corney:
Current State and Future Perspective Research on Lean Remanufacturing - Focusing on the Automotive Industry. 429-436 - Benjamin Knoke, Thorsten Wuest, Klaus-Dieter Thoben:
Understanding Product State Relations within Manufacturing Processes. 437-444 - Jirí Holík, Lenka Landryová:
Universal Simulation Model in Witness Software for Verification and Following Optimization of the Handling Equipment. 445-451 - Léo Le Pallec Marand, Yo Sakata, Daisuke Hirotani, Katsumi Morikawa, Katsuhiko Takahashi:
An Adaptive Kanban and Production Capacity Control Mechanism. 452-459 - Torgeir Welo:
Intelligent Manufacturing Systems: Controlling Elastic Springback in Bending. 460-466 - Dag E. Gotteberg Haartveit, Marco Semini, Erlend Alfnes:
Splitting or Sharing Resources at the Process Level: An Automotive Industry Case Study. 467-473 - Mirlind Bruqi, Ramë Likaj, Jorgaq Kaqani:
Optimization of Flexible Assembly Systems for Electrical Motors. 474-483 - Maria Manuela Azevedo, José António Crispim, Jorge Pinho de Sousa:
Flexible and Reconfigurable Layouts in Complex Manufacturing Systems. 484-493 - Carlos Barbosa, Paulo Afonso, Manuel L. Nunes:
Cost Management Practices in Collaborative Product Development Processes. 494-501 - Nicola Gramegna, Iñigo Loizaga, Susana Berrocal, Franco Bonollo, Giulio Timelli, Stefano Ferraro:
The Multidisciplinary Virtual Product Development Integrates the Influence of Die Casting Defects in the Mechanical Response. 502-509 - Hajime Mizuyama:
Design and Simulation-Based Testing of a Prediction Market System Using SIPS for Demand Forecasting. 510-517 - Quang-Vinh Dang, Izabela Nielsen, Kenn Steger-Jensen:
Multi-objective Genetic Algorithm for Real-World Mobile Robot Scheduling Problem. 518-525 - Malamati Bitzidou, Dimitrios Chrysostomou, Antonios Gasteratos:
Multi-camera 3D Object Reconstruction for Industrial Automation. 526-533 - Grzegorz Bocewicz, Zbigniew Antoni Banaszak, Peter Nielsen, Quang-Vinh Dang:
Multimodal Processes Rescheduling. 534-541 - Silvio Cocuzza, Rosanna Fornasiero, Stefano Debei:
Novel Automated Production System for the Footwear Industry. 542-549 - Spyridon G. Mouroutsos, Eleftheria Mitka:
Safety-Guided Design Concerning Standardization's Requirements of Mowing Robots. 550-557
Human Factors, Learning and Innovation
- Mourad Messaadia, Ahmed Bufardi, Julien Le Duigou, Hadrien Szigeti, Benoît Eynard, Dimitris Kiritsis:
Applying Serious Games in Lean Manufacturing Training. 558-565 - David Jentsch, Ralph Riedel, Egon Müller:
Flow and Physical Objects in Experiential Learning for Industrial Engineering Education. 566-573 - Nikos Papathanasiou, Christos Emmanouilidis, Petros Pistofidis, Dimitris Karampatzakis:
Context Aware E-Support in E-Maintenance. 574-581 - Heiko Duin, Gregor Cerinsek, Manuel Oliveira, Michael A. Bedek, Slavko Dolinsek:
Using Behavioral Indicators to Assess Competences in a Sustainable Manufacturing Learning Scenario. 582-589 - Endris Kerga, Armin Akaberi, Marco Taisch, Monica Rossi, Sergio Terzi:
Lean Product Development: Serious Game and Evaluation of the Learning Outcomes. 590-597 - Philippe Pernelle, Stephane Talbot, Thibault Carron, Jean-Charles Marty:
Learning PLM System with a Serious Game. 598-605 - Elias Matsas, Dimitrios Batras, George-Christopher Vosniakos:
Beware of the Robot: A Highly Interactive and Immersive Virtual Reality Training Application in Robotic Manufacturing Systems. 606-613 - Milan Edl:
Educational Framework of Product Lifecycle Management Issues for Master and PhD Study Programmes. 614-621 - Jannicke Madeleine Baalsrud Hauge, Borzoo Pourabdollahian, Johann c. k. h. Riedel:
The Use of Serious Games in the Education of Engineers. 622-629 - Arz Wehbe, Christophe Merlo, Véronique Pilnière:
Integrating Competence Management into a Coupled Project-System Design Management. 630-637 - Ulysses Martins Moreira Filho, Pedro Luiz de Oliveira Costa Neto:
Model of Skills Development at the Operational Level Applied to the Steel Industry. 638-644 - Eirin Lodgaard, Inger Gamme, Knut Einar Aasland:
Success Factors for PDCA as Continuous Improvement Method in Product Development. 645-652 - Siavash Javadi, Sasha Shahbazi, Mats Jackson:
Supporting Production System Development through the Obeya Concept. 653-660 - Peter Kubicko, Lenka Landryová, Roman Mihal, Iveta Zolotová:
Measurement, Classification and Evaluation of the Innovation Process and the Identification of Indicators in Relation to the Performance Assessment of Company's Innovation Zones. 661-668 - Stefan Wellsandt, Thorsten Wuest, Christopher Durugbo, Klaus-Dieter Thoben:
The Internet of Experiences - Towards an Experience-Centred Innovation Approach. 669-676 - Morten Lund:
Innovating a Business Model for Services with Storytelling. 677-684 - Gündüz Ulusoy, Gürhan Günday, Kemal Kilic, Lütfihak Alpkan:
Business Strategy and Innovativeness: Results from an Empirical Study. 685-692 - Patricia Deflorin, Maike Scherrer-Rathje, Helmut Dietl:
International R&D and Manufacturing Networks: Dynamism, Structure and Absorptive Capacity. 693-700 - Deise Rocha Martins dos Santos Oliveira, Irenilza de Alencar Nääs, Ivo Pierozzi Jr., Oduvaldo Vendrametto:
Building a Conceptual Model for Analyzing Sustainability Projects Aiming at Technology Transfer: A Terminological Approach. 701-707 - Sumit Raut, Muralidharan Somasundaram:
Finding Optimal Resources for IT Services. 708-715 - Renato Perrotta, Oduvaldo Vendrametto:
Development of Engineering Competencies in Brazil and Innovation Policies, an Overview of the Automotive Sector. 716-723 - Alessandro Luiz da Silva, Mônica Franchi Carniello, José Luís Gomes da Silva:
Holistic Vision of Sustainability in the Production Chain in Oil Exploration Pre-Salt Layer. 724-733 - Marcelo Nogueira, Ricardo Jorge Machado:
Applicability of Risk Process in Software Projects in Accordance with ISO 31.000: 2009. 734-741
manage site settings
To protect your privacy, all features that rely on external API calls from your browser are turned off by default. You need to opt-in for them to become active. All settings here will be stored as cookies with your web browser. For more information see our F.A.Q.
last updated on 2025-02-21 19:20 CET by the dblp team
all metadata released as open data under CC0 1.0 license
see also: Terms of Use | Privacy Policy | Imprint
dblp was originally created in 1993 at:
since 2018, dblp has been operated and maintained by:
the dblp computer science bibliography is funded and supported by:
