This repository contains the source code and configuration files of the Arduino Core for Atmel's SAMD21 processor (used on the Arduino/Genuino Zero boards).
This adds support for the FundyLab SAMD Boards such as fundylab_plain_samd21 branched from Adafruit GitHub reposirtory below. -Thank you Ada! https://github.com/adafruit/ArduinoCore-samd
FundyLab plain board: "plain" means no LED accesses by bootloader. As a result, you can use PA17, PB03, PA27 ports(case SAMD21G18A) on your Arduino sketch.
Changed the product name to FundyLab's products Changed the CMSIS version used Changed some other customizations such as FundlLab plain Deleted "post_install.bat"
- AREF must be tied to 3.3V for dac to work. This is a bug in the SAMD51 silicon.
- USB host mode doesn't work yet
If you find a bug you can submit an issue here on github:
https://github.com/adafruit/ArduinoCore-samd
or if it is an issue with the upstream:
https://github.com/arduino/ArduinoCore-samd/issues
Before posting a new issue, please check if the same problem has been already reported by someone else to avoid duplicates.
This core has been developed by Arduino LLC in collaboration with Atmel.
Copyright (c) 2015 Arduino LLC. All right reserved.
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA