/*

Arduino.h - Main include file for the Arduino SDK

Copyright (c) 2005-2013 Arduino Team. All right reserved.

This library is free software; you can redistribute it and/or

modify it under the terms of the GNU Lesser General Public

License as published by the Free Software Foundation; either

version 2.1 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful,

but WITHOUT ANY WARRANTY; without even the implied warranty of

MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU

Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public

License along with this library; if not, write to the Free Software

Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA

*/

#ifndef Arduino_h

#define Arduino_h

#include "api/ArduinoAPI.h"

#include <avr/pgmspace.h>

#include <avr/io.h>

#include <avr/interrupt.h>

#ifdef __cplusplus

extern "C"{

#endif

#if defined(__AVR_ATtiny24__) || defined(__AVR_ATtiny44__) || defined(__AVR_ATtiny84__)

#define DEFAULT 0

#define EXTERNAL 1

#define INTERNAL1V1 2

#define INTERNAL INTERNAL1V1

#elif defined(__AVR_ATtiny25__) || defined(__AVR_ATtiny45__) || defined(__AVR_ATtiny85__)

#define DEFAULT 0

#define EXTERNAL 4

#define INTERNAL1V1 8

#define INTERNAL INTERNAL1V1

#define INTERNAL2V56 9

#define INTERNAL2V56_EXTCAP 13

#else

#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__) || defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__) || defined(__AVR_ATmega644__) || defined(__AVR_ATmega644A__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__)

#define INTERNAL1V1 2

#define INTERNAL2V56 3

#else

#define INTERNAL 3

#endif

#define DEFAULT 1

#define EXTERNAL 0

#endif

#define interrupts() sei()

#define noInterrupts() cli()

#define clockCyclesPerMicrosecond() ( F_CPU / 1000000L )

#define clockCyclesToMicroseconds(a) ( (a) / clockCyclesPerMicrosecond() )

#define microsecondsToClockCycles(a) ( (a) * clockCyclesPerMicrosecond() )

// avr-libc defines _NOP() since 1.6.2

#ifndef _NOP

#define _NOP() do { __asm__ volatile ("nop"); } while (0)

#endif

// Get the bit location within the hardware port of the given virtual pin.

// This comes from the pins_*.c file for the active board configuration.

#define analogInPinToBit(P) (P)

// On the ATmega1280, the addresses of some of the port registers are

// greater than 255, so we can't store them in uint8_t's.

extern const uint16_t PROGMEM port_to_mode_PGM[];

extern const uint16_t PROGMEM port_to_input_PGM[];

extern const uint16_t PROGMEM port_to_output_PGM[];

extern const uint8_t PROGMEM digital_pin_to_port_PGM[];

// extern const uint8_t PROGMEM digital_pin_to_bit_PGM[];

extern const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[];

extern const uint8_t PROGMEM digital_pin_to_timer_PGM[];

// Get the bit location within the hardware port of the given virtual pin.

// This comes from the pins_*.c file for the active board configuration.

//

// These perform slightly better as macros compared to inline functions

//

#define digitalPinToPort(P) ( pgm_read_byte( digital_pin_to_port_PGM + (P) ) )

#define digitalPinToBitMask(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM + (P) ) )

#define digitalPinToTimer(P) ( pgm_read_byte( digital_pin_to_timer_PGM + (P) ) )

#define analogInPinToBit(P) (P)

#define portOutputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_output_PGM + (P))) )

#define portInputRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_input_PGM + (P))) )

#define portModeRegister(P) ( (volatile uint8_t *)( pgm_read_word( port_to_mode_PGM + (P))) )

#define NOT_A_PIN 0

#define NOT_A_PORT 0

#define NOT_AN_INTERRUPT -1

#ifdef ARDUINO_MAIN

#define PA 1

#define PB 2

#define PC 3

#define PD 4

#define PE 5

#define PF 6

#define PG 7

#define PH 8

#define PJ 10

#define PK 11

#define PL 12

#endif

#define NOT_ON_TIMER 0

#define TIMER0A 1

#define TIMER0B 2

#define TIMER1A 3

#define TIMER1B 4

#define TIMER1C 5

#define TIMER2 6

#define TIMER2A 7

#define TIMER2B 8

#define TIMER3A 9

#define TIMER3B 10

#define TIMER3C 11

#define TIMER4A 12

#define TIMER4B 13

#define TIMER4C 14

#define TIMER4D 15

#define TIMER5A 16

#define TIMER5B 17

#define TIMER5C 18

#ifdef __cplusplus

} // extern "C"

#endif

#ifdef __cplusplus

#include "UART.h"

#include "USBCore.h"

#include "CDC.h"

#include "MSC.h"

#if defined(HAVE_HWSERIAL0) && defined(HAVE_CDCSERIAL)

#error "Targets with both UART0 and CDC serial not supported"

#endif

#endif

#include "pins_arduino.h"

#endif