Update prusalink.markdown (home-assistant#30628)

reedy · web-flow · commit 61e4340d78a8 · 2024-01-03T20:42:15.000-05:00
diff --git a/source/_integrations/prusalink.markdown b/source/_integrations/prusalink.markdown
@@ -18,21 +18,21 @@ ha_platforms:
 ha_dhcp: true
 ---
 
-The PrusaLink integration allows you to monitor your [Prusa 3D printer](https://www.prusa3d.com) and its progress with your Home Assistant installation. This integration works with Prusa MINI, Prusa MK3.9/MK4 and Prusa XL. It does not work with the older Raspberry Pi Prusa Link printers.
+The PrusaLink integration allows you to monitor your [Prusa 3D printer](https://www.prusa3d.com) and its progress with your Home Assistant installation. This integration works with Prusa MINI/MINI+, Prusa MK3.9/MK4 and Prusa XL. It does not work with the older Raspberry Pi based Prusa Link printers.
 
-This integration has been updated to utilize the latest v1 API endpoints, which require firmware version 4.7.0 or later. If you own a Prusa Mini, please make sure your printer is running firmware 5.1.0 or a more recent version. Firmware versions 4.7.x and 5.0.x are not available for this model.
+This integration has been updated to utilize the latest v1 API endpoints, which require firmware version 4.7.0 or later. If you own a Prusa MINI/MINI+, please make sure your printer is running firmware 5.1.0 or a more recent version. Firmware versions 4.7.x and 5.0.x are not available for this model.
 
 Firmware update guides can be found here:
 
- - [Prusa Mini](https://help.prusa3d.com/article/firmware-updating-mini-mini_124784)
- - [Prusa MK4/XL](https://help.prusa3d.com/article/how-to-update-firmware-mk4-xl_453086)
+ - [Prusa MINI/MINI+](https://help.prusa3d.com/article/firmware-updating-mini-mini_124784)
+ - [Prusa MK3.9/MK4/XL](https://help.prusa3d.com/article/how-to-update-firmware-mk4-xl_453086)
 
 To obtain the hostname, username, and password:
 
  - On your printer, navigate to **Settings** > **Network** > **PrusaLink**.
  - Find the device's **IP address**. Alternatively, you can look for the printer's IP address or hostname on your router.
  - Note that for some models, the username may not be visible, as it is hardcoded to `maker`.
- - Depending on your model, the entry may not be called **Password**, but **API key**.
+ - Depending on your model, the password entry may not be called **Password**, but **API key**.
 
 {% include integrations/config_flow.md %}
 
