Tiny typo fix (home-assistant#2261)

chennin · fabaff · commit a3c91e417e3f · 2017-03-15T07:16:38.000+01:00
diff --git a/source/_docs/z-wave.markdown b/source/_docs/z-wave.markdown
@@ -82,7 +82,7 @@ Configuration variables:
 - **polling_interval** (*Optional*): The time period in milliseconds between polls of a nodes value. Be careful about using polling values below 30000 (30 seconds) as polling can flood the zwave network and cause problems.
 - **device_config** (*Optional*): This attribute contains node-specific override values. (For releases prior to 0.39 this variable is called **customize**) See [Customizing devices and services](https://home-assistant.io/getting-started/customizing-devices/) for format:
   - **polling_intensity** (*Optional*): Enables polling of a value and sets the frequency of polling (0=none, 1=every time through the list, 2=every other time, etc). If not specified then your device will not be polled.
-  - **ignored** (*Optional*): Ignore this entitiy completely. It won't be shown in the Web Interface and no events are generated for it.
+  - **ignored** (*Optional*): Ignore this entity completely. It won't be shown in the Web Interface and no events are generated for it.
   - **refresh_value** (*Optional*): Enable refreshing of the node value. Only the light component uses this. Defaults to False.
   - **delay** (*Optional*): Specify the delay for refreshing of node value. Only the light component uses this. Defaults to 2 seconds.
 - **debug** (*Optional*): Print verbose z-wave info to log. Defaults to False.
