sun7i-a20-bananapi-m1-plus.dtb \

/*

* Copyright 2016 Luo Yi <luoyi.ly@gmail.com>

*

* Thanks to the original work by Hans de Goede <hdegoede@redhat.com>

*

* This file is dual-licensed: you can use it either under the terms

* of the GPL or the X11 license, at your option. Note that this dual

* licensing only applies to this file, and not this project as a

* whole.

*

* a) This file is free software; you can redistribute it and/or

* modify it under the terms of the GNU General Public License as

* published by the Free Software Foundation; either version 2 of the

* License, or (at your option) any later version.

*

* This file is distributed in the hope that it will be useful,

* but WITHOUT ANY WARRANTY; without even the implied warranty of

* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

* GNU General Public License for more details.

*

* Or, alternatively,

*

* b) Permission is hereby granted, free of charge, to any person

* obtaining a copy of this software and associated documentation

* files (the "Software"), to deal in the Software without

* restriction, including without limitation the rights to use,

* copy, modify, merge, publish, distribute, sublicense, and/or

* sell copies of the Software, and to permit persons to whom the

* Software is furnished to do so, subject to the following

* conditions:

*

* The above copyright notice and this permission notice shall be

* included in all copies or substantial portions of the Software.

*

* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

* OTHER DEALINGS IN THE SOFTWARE.

*/

/dts-v1/;

#include "sun7i-a20.dtsi"

#include "sunxi-common-regulators.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/interrupt-controller/arm-gic.h>

/ {

model = "Banana Pi BPI-M1-Plus";

compatible = "sinovoip,bpi-m1-plus", "allwinner,sun7i-a20";

aliases {

serial0 = &uart0;

};

chosen {

stdout-path = "serial0:115200n8";

};

leds {

compatible = "gpio-leds";

pinctrl-names = "default";

pinctrl-0 = <&led_pins_bananapi>;

green {

label = "bananapi-m1-plus:green:usr";

gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;

};

red {

label = "bananapi-m1-plus:red:usr";

gpios = <&pio 7 25 GPIO_ACTIVE_HIGH>;

linux,default-trigger = "default-on";

};

};

mmc3_pwrseq: mmc3_pwrseq {

compatible = "mmc-pwrseq-simple";

pinctrl-names = "default";

pinctrl-0 = <&mmc3_pwrseq_pin_bananapim1plus>;

reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>; /* PH22 WL-PMU-EN */

};

reg_gmac_3v3: gmac-3v3 {

compatible = "regulator-fixed";

pinctrl-names = "default";

pinctrl-0 = <&gmac_power_pin_bananapi>;

regulator-name = "gmac-3v3";

regulator-min-microvolt = <3300000>;

regulator-max-microvolt = <3300000>;

startup-delay-us = <100000>;

enable-active-high;

gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;

};

};

&ahci {

status = "okay";

};

&codec {

status = "okay";

};

&ehci0 {

status = "okay";

};

&ehci1 {

status = "okay";

};

&gmac {

pinctrl-names = "default";

pinctrl-0 = <&gmac_pins_rgmii_a>;

phy = <&phy1>;

phy-mode = "rgmii";

phy-supply = <&reg_gmac_3v3>;

status = "okay";

phy1: ethernet-phy@1 {

reg = <1>;

};

};

&i2c0 {

pinctrl-names = "default";

pinctrl-0 = <&i2c0_pins_a>;

status = "okay";

axp209: pmic@34 {

compatible = "x-powers,axp209";

reg = <0x34>;

interrupt-parent = <&nmi_intc>;

interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

interrupt-controller;

#interrupt-cells = <1>;

};

};

&ir0 {

pinctrl-names = "default";

pinctrl-0 = <&ir0_rx_pins_a>;

status = "okay";

};

&mmc0 {

pinctrl-names = "default";

pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;

vmmc-supply = <&reg_vcc3v3>;

bus-width = <4>;

cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */

cd-inverted;

status = "okay";

};

&mmc3 {

#address-cells = <1>;

#size-cells = <0>;

pinctrl-names = "default";

pinctrl-0 = <&mmc3_pins_a>;

vmmc-supply = <&reg_vcc3v3>;

mmc-pwrseq = <&mmc3_pwrseq>;

bus-width = <4>;

non-removable;

enable-sdio-wakeup;

status = "okay";

brcmf: bcrmf@1 {

reg = <1>;

compatible = "brcm,bcm4329-fmac";

interrupt-parent = <&pio>;

interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;

interrupt-names = "host-wake";

};

};

&mmc3_pins_a {

/* AP6210 requires pull-up */

allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

};

&ohci0 {

status = "okay";

};

&ohci1 {

status = "okay";

};

&pio {

gmac_power_pin_bananapi: gmac_power_pin@0 {

allwinner,pins = "PH23";

allwinner,function = "gpio_out";

allwinner,drive = <SUN4I_PINCTRL_10_MA>;

allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

};

led_pins_bananapi: led_pins@0 {

allwinner,pins = "PH24", "PG2";

allwinner,function = "gpio_out";

allwinner,drive = <SUN4I_PINCTRL_10_MA>;

allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

};

mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {

allwinner,pins = "PH10";

allwinner,function = "gpio_in";

allwinner,drive = <SUN4I_PINCTRL_10_MA>;

allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

};

mmc3_pwrseq_pin_bananapim1plus: mmc3_pwrseq_pin@0 {

allwinner,pins = "PH22";

allwinner,function = "gpio_out";

allwinner,drive = <SUN4I_PINCTRL_10_MA>;

allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

};

};

&uart0 {

pinctrl-names = "default";

pinctrl-0 = <&uart0_pins_a>;

status = "okay";

};