ARM: dts: imx27 phycore pinctrl

Markus Pargmann · shawnguo2 · commit 26508cb703c6 · 2014-02-09T21:32:58.000+08:00
Add pinctrl nodes and properties for phycore device nodes.

Signed-off-by: Markus Pargmann &lt;mpa@pengutronix.de&gt;
Signed-off-by: Shawn Guo &lt;shawn.guo@linaro.org&gt;
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts
@@ -19,6 +19,28 @@
 	cs-gpios = <&gpio4 28 0>, <&gpio4 27 0>;
 };
 
+&iomuxc {
+	imx27_phycore_rdk {
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD 0x0
+				MX27_PAD_UART1_RXD__UART1_RXD 0x0
+				MX27_PAD_UART1_CTS__UART1_CTS 0x0
+				MX27_PAD_UART1_RTS__UART1_RTS 0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX27_PAD_UART2_TXD__UART2_TXD 0x0
+				MX27_PAD_UART2_RXD__UART2_RXD 0x0
+				MX27_PAD_UART2_CTS__UART2_CTS 0x0
+				MX27_PAD_UART2_RTS__UART2_RTS 0x0
+			>;
+		};
+	};
+};
+
 &sdhci2 {
 	bus-width = <4>;
 	cd-gpios = <&gpio3 29 0>;
@@ -29,11 +51,15 @@
 
 &uart1 {
 	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
 	status = "okay";
 };
 
 &uart2 {
 	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dts b/arch/arm/boot/dts/imx27-phytec-phycore-som.dts
@@ -135,11 +135,15 @@
 
 &fec {
 	phy-reset-gpios = <&gpio3 30 0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
 	status = "okay";
 };
 
 &i2c2 {
 	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
 	at24@52 {
@@ -159,6 +163,41 @@
 	};
 };
 
+&iomuxc {
+	imx27_phycore_som {
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+				MX27_PAD_SSI3_TXDAT__GPIO3_30	0x0 /* FEC RST */
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+	};
+};
+
 &nfc {
 	nand-bus-width = <8>;
 	nand-ecc-mode = "hw";
