sun8i-h3-sinovoip-bpi-m2-plus.dtb \

sun8i-r16-parrot.dtb

/*

* Copyright 2016 Quentin Schulz

*

* Quentin Schulz <quentin.schulz@free-electrons.com>

*

* This file is dual-licensed: you can use it either under the terms

* of the GPL or the X11 license, at your option. Note that this dual

* licensing only applies to this file, and not this project as a

* whole.

*

* a) This file is free software; you can redistribute it and/or

* modify it under the terms of the GNU General Public License as

* published by the Free Software Foundation; either version 2 of the

* License, or (at your option) any later version.

*

* This file is distributed in the hope that it will be useful,

* but WITHOUT ANY WARRANTY; without even the implied warranty of

* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

* GNU General Public License for more details.

*

* Or, alternatively,

*

* b) Permission is hereby granted, free of charge, to any person

* obtaining a copy of this software and associated documentation

* files (the "Software"), to deal in the Software without

* restriction, including without limitation the rights to use,

* copy, modify, merge, publish, distribute, sublicense, and/or

* sell copies of the Software, and to permit persons to whom the

* Software is furnished to do so, subject to the following

* conditions:

*

* The above copyright notice and this permission notice shall be

* included in all copies or substantial portions of the Software.

*

* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,

* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES

* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT

* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR

* OTHER DEALINGS IN THE SOFTWARE.

*/

/dts-v1/;

#include "sun8i-a33.dtsi"

#include "sunxi-common-regulators.dtsi"

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/input/input.h>

/ {

model = "Allwinner R16 EVB (Parrot)";

compatible = "allwinner,parrot", "allwinner,sun8i-a33";

aliases {

serial0 = &uart0;

};

chosen {

stdout-path = "serial0:115200n8";

};

leds {

compatible = "gpio-leds";

pinctrl-names = "default";

pinctrl-0 = <&led_pins_parrot>;

led1 {

label = "parrot:led1:usr";

gpio = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */

};

led2 {

label = "parrot:led2:usr";

gpio = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */

};

};

wifi_pwrseq: wifi_pwrseq {

compatible = "mmc-pwrseq-simple";

reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL06 */

};

};

&ehci0 {

status = "okay";

};

&i2c1 {

pinctrl-names = "default";

pinctrl-0 = <&i2c1_pins_a>;

status = "okay";

/*

* FIXME: An as-yet-unknown accelerometer is connected to this

* i2c bus.

*/

};

&lradc {

vref-supply = <&reg_aldo3>;

status = "okay";

button@0 {

label = "V+";

linux,code = <KEY_VOLUMEUP>;

channel = <0>;

voltage = <190000>;

};

button@1 {

label = "V-";

linux,code = <KEY_VOLUMEDOWN>;

channel = <0>;

voltage = <390000>;

};

};

&mmc0 {

pinctrl-names = "default";

pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_parrot>;

vmmc-supply = <&reg_dcdc1>;

cd-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */

bus-width = <4>;

status = "okay";

};

&mmc1 {

pinctrl-names = "default";

pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_parrot>;

vmmc-supply = <&reg_aldo1>;

mmc-pwrseq = <&wifi_pwrseq>;

bus-width = <4>;

non-removable;

status = "okay";

};

&mmc2 {

pinctrl-names = "default";

pinctrl-0 = <&mmc2_8bit_pins>;

vmmc-supply = <&reg_dcdc1>;

bus-width = <8>;

non-removable;

cap-mmc-hw-reset;

status = "okay";

};

&mmc2_8bit_pins {

allwinner,drive = <SUN4I_PINCTRL_40_MA>;

allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

};

&ohci0 {

status = "okay";

};

&pio {

mmc0_cd_pin_parrot: mmc0_cd_pin@0 {

allwinner,pins = "PD14";

allwinner,function = "gpio_in";

allwinner,drive = <SUN4I_PINCTRL_10_MA>;

allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

};

led_pins_parrot: led_pins@0 {

allwinner,pins = "PE16", "PE17";

allwinner,function = "gpio_out";

allwinner,drive = <SUN4I_PINCTRL_10_MA>;

allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

};

usb0_id_det: usb0_id_detect_pin@0 {

allwinner,pins = "PD10";

allwinner,function = "gpio_in";

allwinner,drive = <SUN4I_PINCTRL_10_MA>;

allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;

};

usb1_vbus_pin_parrot: usb1_vbus_pin@0 {

allwinner,pins = "PD12";

allwinner,function = "gpio_out";

allwinner,drive = <SUN4I_PINCTRL_10_MA>;

allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

};

};

&r_pio {

wifi_reset_pin_parrot: wifi_reset_pin@0 {

allwinner,pins = "PL6";

allwinner,function = "gpio_out";

allwinner,drive = <SUN4I_PINCTRL_10_MA>;

allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;

};

};

&r_rsb {

status = "okay";

axp22x: pmic@3a3 {

compatible = "x-powers,axp223";

reg = <0x3a3>;

interrupt-parent = <&nmi_intc>;

interrupts = <0 IRQ_TYPE_LEVEL_LOW>;

drivevbus-supply = <&reg_vcc5v0>;

x-powers,drive-vbus-en;

};

};

#include "axp22x.dtsi"

&reg_aldo1 {

regulator-always-on;

regulator-min-microvolt = <3000000>;

regulator-max-microvolt = <3000000>;

regulator-name = "vcc-io";

};

&reg_aldo2 {

regulator-always-on;

regulator-min-microvolt = <2350000>;

regulator-max-microvolt = <2650000>;

regulator-name = "vdd-dll";

};

&reg_aldo3 {

regulator-always-on;

regulator-min-microvolt = <2700000>;

regulator-max-microvolt = <3300000>;

regulator-name = "vcc-pll-avcc";

};

&reg_dc5ldo {

regulator-always-on;

regulator-min-microvolt = <900000>;

regulator-max-microvolt = <1400000>;

regulator-name = "vdd-cpus";

};

&reg_dcdc1 {

regulator-always-on;

regulator-min-microvolt = <3000000>;

regulator-max-microvolt = <3000000>;

regulator-name = "vcc-3v0";

};

&reg_dcdc2 {

regulator-always-on;

regulator-min-microvolt = <900000>;

regulator-max-microvolt = <1400000>;

regulator-name = "vdd-sys";

};

&reg_dcdc3 {

regulator-always-on;

regulator-min-microvolt = <900000>;

regulator-max-microvolt = <1400000>;

regulator-name = "vdd-cpu";

};

&reg_dcdc5 {

regulator-always-on;

regulator-min-microvolt = <1500000>;

regulator-max-microvolt = <1500000>;

regulator-name = "vcc-dram";

};

&reg_dldo1 {

/*

* TODO: WiFi chip needs dldo1 AND dldo2 to be on to be powered.

* Remove next line once it is possible to sync two regulators.

*/

regulator-always-on;

regulator-min-microvolt = <3300000>;

regulator-max-microvolt = <3300000>;

regulator-name = "vcc-wifi0";

};

&reg_dldo2 {

/*

* TODO: WiFi chip needs dldo1 AND dldo2 to be on to be powered.

* Remove next line once it is possible to sync two regulators.

*/

regulator-always-on;

regulator-min-microvolt = <3300000>;

regulator-max-microvolt = <3300000>;

regulator-name = "vcc-wifi1";

};

&reg_dldo3 {

regulator-min-microvolt = <3000000>;

regulator-max-microvolt = <3000000>;

regulator-name = "vcc-3v0-csi";

};

&reg_drivevbus {

regulator-name = "usb0-vbus";

status = "okay";

};

&reg_eldo1 {

regulator-min-microvolt = <1200000>;

regulator-max-microvolt = <1200000>;

regulator-name = "vcc-1v2-hsic";

};

&reg_eldo2 {

regulator-min-microvolt = <3000000>;

regulator-max-microvolt = <3000000>;

regulator-name = "vcc-dsp";

};

&reg_eldo3 {

regulator-min-microvolt = <3000000>;

regulator-max-microvolt = <3000000>;

regulator-name = "eldo3";

};

&reg_usb1_vbus {

pinctrl-names = "default";

pinctrl-0 = <&usb1_vbus_pin_parrot>;

gpio = <&pio 3 12 GPIO_ACTIVE_HIGH>; /* PD12 */

status = "okay";

};

&uart0 {

pinctrl-names = "default";

pinctrl-0 = <&uart0_pins_b>;

status = "okay";

};

&usb_otg {

dr_mode = "otg";

status = "okay";

};

&usb_power_supply {

status = "okay";

};

&usbphy {

status = "okay";

pinctrl-names = "default";

pinctrl-0 = <&usb0_id_det>;

usb0_vbus-supply = <&reg_drivevbus>;

usb0_id_det-gpios = <&pio 3 10 GPIO_ACTIVE_HIGH>; /* PD10 */

usb0_vbus_power-supply = <&usb_power_supply>;

usb1_vbus-supply = <&reg_usb1_vbus>;

};