spi: pxa2xx: Do not detect number of enabled chip selects on Intel SPT

jhnikula · broonie · commit 66ec246eb998 · 2016-04-26T11:14:00.000+01:00
Certain Intel Sunrisepoint PCH variants report zero chip selects in SPI capabilities register even they have one per port. Detection in pxa2xx_spi_probe() sets master->num_chipselect to 0 leading to -EINVAL from spi_register_master() where chip select count is validated. Fix this by not using SPI capabilities register on Sunrisepoint. They don't have more than one chip select so use the default value 1 instead of detection. Fixes: 8b136ba ("spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals") Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
@@ -126,7 +126,7 @@ static const struct lpss_config lpss_platforms[] = {
 		.reg_general = -1,
 		.reg_ssp = 0x20,
 		.reg_cs_ctrl = 0x24,
-		.reg_capabilities = 0xfc,
+		.reg_capabilities = -1,
 		.rx_threshold = 1,
 		.tx_threshold_lo = 32,
 		.tx_threshold_hi = 56,
