Skip to content

Commit 6ad63de

Browse files
torvaldstorvalds
committed
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC device tree updates from Arnd Bergmann: "This is a smaller update than the past few times, but with just over 500 non-merge changesets still dwarfes the rest of the SoC tree. Three new SoC platforms get added, each one a follow-up to an existing product, and added here in combination with a reference platform: - Renesas RZ/A2M (R7S9210) 32-bit Cortex-A9 Real-time imaging processor: https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rza/rza2m.html - Renesas RZ/G2E (r8a774c0) 64-bit Cortex-A53 SoC "for Rich Graphics Applications": https://www.renesas.com/eu/en/products/microcontrollers-microprocessors/rz/rzg/rzg2e.html - NXP i.MX8QuadXPlus 64-bit Cortex-A35 SoC: https://www.nxp.com/products/processors-and-microcontrollers/arm-based-processors-and-mcus/i.mx-applications-processors/i.mx-8-processors/i.mx-8x-family-arm-cortex-a35-3d-graphics-4k-video-dsp-error-correcting-code-on-ddr:i.MX8X These are actual commercial products we now support with an in-kernel device tree source file: - Bosch Guardian is a product made by Bosch Power Tools GmbH, based on the Texas Instruments AM335x chip - Winterland IceBoard is a Texas Instruments AM3874 based machine used in telescopes at the south pole and elsewhere, see commit d031773 for some pointers: - Inspur on5263m5 is an x86 server platform with an Aspeed ast2500 baseboard management controller. This is for running on the BMC. - Zodiac Digital Tapping Unit, apparently a kind of ethernet switch used in airplanes. - Phicomm K3 is a WiFi router based on Broadcom bcm47094 - Methode Electronics uDPU FTTdp distribution point unit - X96 Max, a generic TV box based on Amlogic G12a (S905X2) - NVIDIA Shield TV (Darcy) based on Tegra210 And then there are several new SBC, evaluation, development or modular systems that we add: - Three new Rockchips rk3399 based boards: - FriendlyElec NanoPC-T4 and NanoPi M4 - Radxa ROCK Pi 4 - Five new i.MX6 family SoM modules and boards for industrial products: - Logic PD i.MX6QD SoM and evaluation baseboad - Y Soft IOTA Draco/Hydra/Ursa family boards based on i.MX6DL - Phytec phyCORE i.MX6 UltraLite SoM and evaluation module - MYIR Tech MYD-LPC4357 development based on the NXP lpc4357 microcontroller - Chameleon96, an Intel/Altera Cyclone5 based FPGA development system in 96boards form factor - Arm Fixed Virtual Platforms(FVP) Base RevC, a purely virtual platform for corresponding to the latest "fast model" - Another Raspberry Pi variant: Model 3 A+, supported both in 32-bit and 64-bit mode. - Oxalis Evalkit V100 based on NXP Layerscape LS1012a, in 96Boards enterprise form factor - Elgin RV1108 R1 development board based on 32-bit Rockchips RV1108 For already supported boards and SoCs, we often add support for new devices after merging the drivers. This time, the largest changes include updates for - STMicroelectronics stm32mp1, which was now formally launched last week - Qualcomm Snapdragon 845, a high-end phone and low-end laptop chip - Action Semi S700 - TI AM654x, their recently merged 64-bit SoC from the OMAP family - Various Amlogic Meson SoCs - Mediatek MT2712 - NVIDIA Tegra186 and Tegra210 - The ancient NXP lpc32xx family - Samsung s5pv210, used in some older mobile phones Many other chips see smaller updates and bugfixes beyond that" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (506 commits) ARM: dts: exynos: Fix max voltage for buck8 regulator on Odroid XU3/XU4 dt-bindings: net: ti: deprecate cpsw-phy-sel bindings ARM: dts: am335x: switch to use phy-gmii-sel ARM: dts: am4372: switch to use phy-gmii-sel ARM: dts: dm814x: switch to use phy-gmii-sel ARM: dts: dra7: switch to use phy-gmii-sel arch: arm: dts: kirkwood-rd88f6281: Remove disabled marvell,dsa reference ARM: dts: exynos: Add support for secondary DAI to Odroid XU4 ARM: dts: exynos: Add support for secondary DAI to Odroid XU3 ARM: dts: exynos: Disable ARM PMU on Odroid XU3-lite ARM: dts: exynos: Add stdout path property to Arndale board ARM: dts: exynos: Add minimal clkout parameters to Exynos3250 PMU ARM: dts: exynos: Enable ADC on Odroid HC1 arm64: dts: sprd: Remove wildcard compatible string arm64: dts: sprd: Add SC27XX fuel gauge device arm64: dts: sprd: Add SC2731 charger device arm64: dts: sprd: Add ADC calibration support arm64: dts: sprd: Remove PMIC INTC irq trigger type arm64: dts: rockchip: Enable tsadc device on rock960 ARM: dts: rockchip: add chosen node on veyron devices ...
2 parents aebbfaf + a323892 commit 6ad63de

File tree

539 files changed

+21290
-2851
lines changed

Some content is hidden

Large Commits have some content hidden by default. Use the searchbox below for content that may be hidden.

539 files changed

+21290
-2851
lines changed

‎Documentation/devicetree/bindings/arm/amlogic.txt

Lines changed: 1 addition & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -109,6 +109,7 @@ Board compatible values (alphabetically, grouped by SoC):
109109
- "amlogic,s400" (Meson axg a113d)
110110

111111
- "amlogic,u200" (Meson g12a s905d2)
112+
- "amediatech,x96-max" (Meson g12a s905x2)
112113

113114
Amlogic Meson Firmware registers Interface
114115
------------------------------------------

‎Documentation/devicetree/bindings/arm/armadeus.txt

Lines changed: 0 additions & 6 deletions
This file was deleted.

‎Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt

Lines changed: 4 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -30,6 +30,10 @@ Raspberry Pi 2 Model B
3030
Required root node properties:
3131
compatible = "raspberrypi,2-model-b", "brcm,bcm2836";
3232

33+
Raspberry Pi 3 Model A+
34+
Required root node properties:
35+
compatible = "raspberrypi,3-model-a-plus", "brcm,bcm2837";
36+
3337
Raspberry Pi 3 Model B
3438
Required root node properties:
3539
compatible = "raspberrypi,3-model-b", "brcm,bcm2837";

‎Documentation/devicetree/bindings/arm/bhf.txt

Lines changed: 0 additions & 6 deletions
This file was deleted.

‎Documentation/devicetree/bindings/arm/compulab-boards.txt

Lines changed: 0 additions & 25 deletions
This file was deleted.

‎Documentation/devicetree/bindings/arm/freescale/fsl,imx7ulp-sim.txt

Lines changed: 16 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,16 @@
1+
Freescale i.MX7ULP System Integration Module
2+
----------------------------------------------
3+
The system integration module (SIM) provides system control and chip configuration
4+
registers. In this module, chip revision information is located in JTAG ID register,
5+
and a set of registers have been made available in DGO domain for SW use, with the
6+
objective to maintain its value between system resets.
7+
8+
Required properties:
9+
- compatible: Should be "fsl,imx7ulp-sim".
10+
- reg: Specifies base physical address and size of the register sets.
11+
12+
Example:
13+
sim: sim@410a3000 {
14+
compatible = "fsl,imx7ulp-sim", "syscon";
15+
reg = <0x410a3000 0x1000>;
16+
};

‎Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt

Lines changed: 5 additions & 2 deletions
Original file line numberDiff line numberDiff line change
@@ -70,7 +70,10 @@ Clock bindings based on SCU Message Protocol
7070
This binding uses the common clock binding[1].
7171

7272
Required properties:
73-
- compatible: Should be "fsl,imx8qxp-clock".
73+
- compatible: Should be one of:
74+
"fsl,imx8qm-clock"
75+
"fsl,imx8qxp-clock"
76+
followed by "fsl,scu-clk"
7477
- #clock-cells: Should be 1. Contains the Clock ID value.
7578
- clocks: List of clock specifiers, must contain an entry for
7679
each required entry in clock-names
@@ -137,7 +140,7 @@ firmware {
137140
&lsio_mu1 1 3>;
138141

139142
clk: clk {
140-
compatible = "fsl,imx8qxp-clk";
143+
compatible = "fsl,imx8qxp-clk", "fsl,scu-clk";
141144
#clock-cells = <1>;
142145
};
143146

‎Documentation/devicetree/bindings/arm/fsl.txt

Lines changed: 0 additions & 237 deletions
This file was deleted.

0 commit comments

Comments
 (0)