Skip to content

Commit 94fe8c6

Browse files
Richard Röjforsdavem330
Richard Röjfors
authored and
davem330
committed
ks8842: Support DMA when accessed via timberdale
This patch adds support for RX and TX DMA via the DMA API, this is only supported when the KS8842 is accessed via timberdale. There is no support for DMA on the generic bus interface it self, a state machine inside the FPGA is handling RX and TX transfers to/from buffers in the FPGA. The host CPU can do DMA to and from these buffers. The FPGA has to handle the RX interrupts, so these must be enabled in the ks8842 but not in the FPGA. The driver must not disable the RX interrupt that would mean that the data transfers into the FPGA buffers would stop. The host shall not enable TX interrupts since TX is handled by the FPGA, the host is notified by DMA callbacks when transfers are finished. Which DMA channels to use are added as parameters in the platform data struct. Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
1 parent 3eeb299 commit 94fe8c6

File tree

2 files changed

+447
-21
lines changed

2 files changed

+447
-21
lines changed

0 commit comments

Comments
 (0)