ntb: idt: Alter the driver info comments

fancer · jonmason · commit a662315d8ad9 · 2018-11-01T10:33:12.000-04:00
Since IDT PCIe-switch temperature sensor is now always available
irregardless of the EEPROM/BIOS settings, Kconfig and in-code
description should be properly altered. In addition lets update
the driver copyright lines.

Signed-off-by: Serge Semin &lt;fancer.lancer@gmail.com&gt;
Signed-off-by: Jon Mason &lt;jdmason@kudzu.us&gt;
diff --git a/drivers/ntb/hw/idt/Kconfig b/drivers/ntb/hw/idt/Kconfig
@@ -24,9 +24,7 @@ config NTB_IDT
 	 BAR settings of peer NT-functions, the BAR setups can't be done over
 	 kernel PCI fixups. That's why the alternative pre-initialization
 	 techniques like BIOS using SMBus interface or EEPROM should be
-	 utilized. Additionally if one needs to have temperature sensor
-	 information printed to system log, the corresponding registers must
-	 be initialized within BIOS/EEPROM as well.
+	 utilized.
 
 	 If unsure, say N.
 
diff --git a/drivers/ntb/hw/idt/ntb_hw_idt.c b/drivers/ntb/hw/idt/ntb_hw_idt.c
@@ -4,7 +4,7 @@
  *
  *   GPL LICENSE SUMMARY
  *
- *   Copyright (C) 2016 T-Platforms All Rights Reserved.
+ *   Copyright (C) 2016-2018 T-Platforms JSC All Rights Reserved.
  *
  *   This program is free software; you can redistribute it and/or modify it
  *   under the terms and conditions of the GNU General Public License,
@@ -1824,10 +1824,11 @@ static int idt_ntb_peer_msg_write(struct ntb_dev *ntb, int pidx, int midx,
  *                      7. Temperature sensor operations
  *
  *    IDT PCIe-switch has an embedded temperature sensor, which can be used to
- * warn a user-space of possible chip overheating. Since workload temperature
- * can be different on different platforms, temperature thresholds as well as
- * general sensor settings must be setup in the framework of BIOS/EEPROM
- * initializations. It includes the actual sensor enabling as well.
+ * check current chip core temperature. Since a workload environment can be
+ * different on different platforms, an offset and ADC/filter settings can be
+ * specified. Although the offset configuration is only exposed to the sysfs
+ * hwmon interface at the moment. The rest of the settings can be adjusted
+ * for instance by the BIOS/EEPROM firmware.
  *=============================================================================
  */
 
diff --git a/drivers/ntb/hw/idt/ntb_hw_idt.h b/drivers/ntb/hw/idt/ntb_hw_idt.h
@@ -4,7 +4,7 @@
  *
  *   GPL LICENSE SUMMARY
  *
- *   Copyright (C) 2016 T-Platforms All Rights Reserved.
+ *   Copyright (C) 2016-2018 T-Platforms JSC All Rights Reserved.
  *
  *   This program is free software; you can redistribute it and/or modify it
  *   under the terms and conditions of the GNU General Public License,

Original file line number	Diff line number	Diff line change
`@@ -4,7 +4,7 @@`
`4`	`4`	`*`
`5`	`5`	`* GPL LICENSE SUMMARY`
`6`	`6`	`*`
`7`		`- * Copyright (C) 2016 T-Platforms All Rights Reserved.`
	`7`	`+ * Copyright (C) 2016-2018 T-Platforms JSC All Rights Reserved.`
`8`	`8`	`*`
`9`	`9`	`* This program is free software; you can redistribute it and/or modify it`
`10`	`10`	`* under the terms and conditions of the GNU General Public License,`
`@@ -1824,10 +1824,11 @@ static int idt_ntb_peer_msg_write(struct ntb_dev *ntb, int pidx, int midx,`
`1824`	`1824`	`* 7. Temperature sensor operations`
`1825`	`1825`	`*`
`1826`	`1826`	`* IDT PCIe-switch has an embedded temperature sensor, which can be used to`
`1827`		`- * warn a user-space of possible chip overheating. Since workload temperature`
`1828`		`- * can be different on different platforms, temperature thresholds as well as`
`1829`		`- * general sensor settings must be setup in the framework of BIOS/EEPROM`
`1830`		`- * initializations. It includes the actual sensor enabling as well.`
	`1827`	`+ * check current chip core temperature. Since a workload environment can be`
	`1828`	`+ * different on different platforms, an offset and ADC/filter settings can be`
	`1829`	`+ * specified. Although the offset configuration is only exposed to the sysfs`
	`1830`	`+ * hwmon interface at the moment. The rest of the settings can be adjusted`
	`1831`	`+ * for instance by the BIOS/EEPROM firmware.`
`1831`	`1832`	`*=============================================================================`
`1832`	`1833`	`*/`
`1833`	`1834`