regulator: s2mps11: Fix wrong calculation of register offset

batcheu · broonie · commit ad26aa6c6097 · 2015-01-08T18:16:58.000Z
This patch adds missing registers('BUCK7_SW' & 'LDO29_CTRL'). Since BUCK7 has 1 more register (BUCK7_SW) than others, register offset should be added one more for which has bigger address than BUCK7 registers. Fixes: 76b9840(regulator: s2mps11: Add support S2MPS13 regulator device) Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: <stable@vger.kernel.org>
diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
@@ -405,6 +405,40 @@ static struct regulator_ops s2mps14_reg_ops;
 	.enable_mask	= S2MPS14_ENABLE_MASK			\
 }
 
+#define regulator_desc_s2mps13_buck7(num, min, step, min_sel) {	\
+	.name		= "BUCK"#num,				\
+	.id		= S2MPS13_BUCK##num,			\
+	.ops		= &s2mps14_reg_ops,			\
+	.type		= REGULATOR_VOLTAGE,			\
+	.owner		= THIS_MODULE,				\
+	.min_uV		= min,					\
+	.uV_step	= step,					\
+	.linear_min_sel	= min_sel,				\
+	.n_voltages	= S2MPS14_BUCK_N_VOLTAGES,		\
+	.ramp_delay	= S2MPS13_BUCK_RAMP_DELAY,		\
+	.vsel_reg	= S2MPS13_REG_B1OUT + (num) * 2 - 1,	\
+	.vsel_mask	= S2MPS14_BUCK_VSEL_MASK,		\
+	.enable_reg	= S2MPS13_REG_B1CTRL + (num - 1) * 2,	\
+	.enable_mask	= S2MPS14_ENABLE_MASK			\
+}
+
+#define regulator_desc_s2mps13_buck8_10(num, min, step, min_sel) {	\
+	.name		= "BUCK"#num,				\
+	.id		= S2MPS13_BUCK##num,			\
+	.ops		= &s2mps14_reg_ops,			\
+	.type		= REGULATOR_VOLTAGE,			\
+	.owner		= THIS_MODULE,				\
+	.min_uV		= min,					\
+	.uV_step	= step,					\
+	.linear_min_sel	= min_sel,				\
+	.n_voltages	= S2MPS14_BUCK_N_VOLTAGES,		\
+	.ramp_delay	= S2MPS13_BUCK_RAMP_DELAY,		\
+	.vsel_reg	= S2MPS13_REG_B1OUT + (num) * 2 - 1,	\
+	.vsel_mask	= S2MPS14_BUCK_VSEL_MASK,		\
+	.enable_reg	= S2MPS13_REG_B1CTRL + (num) * 2 - 1,	\
+	.enable_mask	= S2MPS14_ENABLE_MASK			\
+}
+
 static const struct regulator_desc s2mps13_regulators[] = {
 	regulator_desc_s2mps13_ldo(1,  MIN_800_MV,  STEP_12_5_MV, 0x00),
 	regulator_desc_s2mps13_ldo(2,  MIN_1400_MV, STEP_50_MV,   0x0C),
@@ -452,10 +486,10 @@ static const struct regulator_desc s2mps13_regulators[] = {
 	regulator_desc_s2mps13_buck(4,  MIN_500_MV,  STEP_6_25_MV, 0x10),
 	regulator_desc_s2mps13_buck(5,  MIN_500_MV,  STEP_6_25_MV, 0x10),
 	regulator_desc_s2mps13_buck(6,  MIN_500_MV,  STEP_6_25_MV, 0x10),
-	regulator_desc_s2mps13_buck(7,  MIN_500_MV,  STEP_6_25_MV, 0x10),
-	regulator_desc_s2mps13_buck(8,  MIN_1000_MV, STEP_12_5_MV, 0x20),
-	regulator_desc_s2mps13_buck(9,  MIN_1000_MV, STEP_12_5_MV, 0x20),
-	regulator_desc_s2mps13_buck(10, MIN_500_MV,  STEP_6_25_MV, 0x10),
+	regulator_desc_s2mps13_buck7(7,  MIN_500_MV,  STEP_6_25_MV, 0x10),
+	regulator_desc_s2mps13_buck8_10(8,  MIN_1000_MV, STEP_12_5_MV, 0x20),
+	regulator_desc_s2mps13_buck8_10(9,  MIN_1000_MV, STEP_12_5_MV, 0x20),
+	regulator_desc_s2mps13_buck8_10(10, MIN_500_MV,  STEP_6_25_MV, 0x10),
 };
 
 static int s2mps14_regulator_enable(struct regulator_dev *rdev)
diff --git a/include/linux/mfd/samsung/s2mps13.h b/include/linux/mfd/samsung/s2mps13.h
@@ -59,6 +59,7 @@ enum s2mps13_reg {
 	S2MPS13_REG_B6CTRL,
 	S2MPS13_REG_B6OUT,
 	S2MPS13_REG_B7CTRL,
+	S2MPS13_REG_B7SW,
 	S2MPS13_REG_B7OUT,
 	S2MPS13_REG_B8CTRL,
 	S2MPS13_REG_B8OUT,
@@ -102,6 +103,7 @@ enum s2mps13_reg {
 	S2MPS13_REG_L26CTRL,
 	S2MPS13_REG_L27CTRL,
 	S2MPS13_REG_L28CTRL,
+	S2MPS13_REG_L29CTRL,
 	S2MPS13_REG_L30CTRL,
 	S2MPS13_REG_L31CTRL,
 	S2MPS13_REG_L32CTRL,
