clk: imx: vf610: add TCON ipg clock

agners · Shawn Guo · commit afd7350a9ac0 · 2016-04-12T09:22:17.000+08:00
Add the ipg (bus) clock for the TCON modules (Timing Controller). This
module is required by the new DCU DRM driver, since the display signals
pass through TCON.

Signed-off-by: Stefan Agner &lt;stefan@agner.ch&gt;
Signed-off-by: Shawn Guo &lt;shawnguo@kernel.org&gt;
diff --git a/drivers/clk/imx/clk-vf610.c b/drivers/clk/imx/clk-vf610.c
@@ -378,6 +378,9 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
 	clk[VF610_CLK_DCU1_DIV] = imx_clk_divider("dcu1_div", "dcu1_en", CCM_CSCDR3, 20, 3);
 	clk[VF610_CLK_DCU1] = imx_clk_gate2("dcu1", "ipg_bus", CCM_CCGR9, CCM_CCGRx_CGn(8));
 
+	clk[VF610_CLK_TCON0] = imx_clk_gate2("tcon0", "platform_bus", CCM_CCGR1, CCM_CCGRx_CGn(13));
+	clk[VF610_CLK_TCON1] = imx_clk_gate2("tcon1", "platform_bus", CCM_CCGR7, CCM_CCGRx_CGn(13));
+
 	clk[VF610_CLK_ESAI_SEL] = imx_clk_mux("esai_sel", CCM_CSCMR1, 20, 2, esai_sels, 4);
 	clk[VF610_CLK_ESAI_EN] = imx_clk_gate("esai_en", "esai_sel", CCM_CSCDR2, 30);
 	clk[VF610_CLK_ESAI_DIV] = imx_clk_divider("esai_div", "esai_en", CCM_CSCDR2, 24, 4);
diff --git a/include/dt-bindings/clock/vf610-clock.h b/include/dt-bindings/clock/vf610-clock.h
@@ -197,6 +197,8 @@
 #define VF610_CLK_OCOTP         184
 #define VF610_CLK_DDRMC			185
 #define VF610_CLK_WKPU			186
-#define VF610_CLK_END			187
+#define VF610_CLK_TCON0			187
+#define VF610_CLK_TCON1			188
+#define VF610_CLK_END			189
 
 #endif /* __DT_BINDINGS_CLOCK_VF610_H */
