diff --git a/CHANGELOG.md b/CHANGELOG.md index bf68e068..07cd1968 100644 --- a/CHANGELOG.md +++ b/CHANGELOG.md @@ -5,6 +5,7 @@ ### Enhancements: * feat(board): add support for Fitipower EK9716B LCD controller for CrowPanel 7.0" board by @lboue (#78) +* feat(board): add support for Waveshare ESP32-S3-Touch-LCD-4.3 by @lboue (#99) ### Bugfixes: diff --git a/ESP_Panel_Board_Supported.h b/ESP_Panel_Board_Supported.h index 33853e08..58d065c3 100644 --- a/ESP_Panel_Board_Supported.h +++ b/ESP_Panel_Board_Supported.h @@ -74,6 +74,15 @@ */ // #define BOARD_ESP32_4848S040C_I_Y_3 +/* + * Waveshare Supported Boards (https://www.waveshare.com/): + * + * - ESP32_S3_Touch_LCD_4_3: + * - https://www.waveshare.com/esp32-s3-touch-lcd-4.3.htm + * + */ +// #define BOARD_WAVESHARE_ESP32_S3_Touch_LCD_4_3 + /** * Do not change the following versions, they are used to check if the configurations in this file are compatible with * the current version of `ESP_Panel_Board_Supported.h` in the library. The detailed rules are as follows: diff --git a/README.md b/README.md index 1e836ab5..e0755275 100644 --- a/README.md +++ b/README.md @@ -65,6 +65,7 @@ Below is a list of [supported development boards](docs/Board_Instructions.md): | [Espressif](docs/Board_Instructions.md#espressif) | ESP32-C3-LCDkit, ESP32-S3-BOX, ESP32-S3-BOX-3, ESP32-S3-BOX-3B, ESP32-S3-BOX-3(beta), ESP32-S3-BOX-Lite, ESP32-S3-EYE, ESP32-S3-Korvo-2, ESP32-S3-LCD-EV-Board, ESP32-S3-LCD-EV-Board-2, ESP32-S3-USB-OTG | | [M5Stack](docs/Board_Instructions.md#m5stack) | M5STACK-M5CORE2, M5STACK-M5DIAL, M5STACK-M5CORES3 | | [Jingcai](docs/Board_Instructions.md#shenzhen-jingcai-intelligent) | ESP32-4848S040C_I_Y_3 | +| [Waveshare](docs/Board_Instructions.md#waveshare) | ESP32-S3-Touch-LCD-4.3 | Developers and manufacturers are welcomed to contribute PRs to add more development boards. For detailed instructions, please refer to the [`Board Development Guide`](./docs/Board_Contribution_Guide.md). diff --git a/README_CN.md b/README_CN.md index 5dfb4c1c..48fb7112 100644 --- a/README_CN.md +++ b/README_CN.md @@ -65,6 +65,7 @@ ESP32_Display_Panel 的功能框图如下所示，主要包含以下特性： | [Espressif](docs/Board_Instructions.md#espressif) | ESP32-C3-LCDkit, ESP32-S3-BOX, ESP32-S3-BOX-3, ESP32-S3-BOX-3B, ESP32-S3-BOX-3(beta), ESP32-S3-BOX-Lite, ESP32-S3-EYE, ESP32-S3-Korvo-2, ESP32-S3-LCD-EV-Board, ESP32-S3-LCD-EV-Board-2, ESP32-S3-USB-OTG | | [M5Stack](docs/Board_Instructions.md#m5stack) | M5STACK-M5CORE2, M5STACK-M5DIAL, M5STACK-M5CORES3 | | [Jingcai](docs/Board_Instructions.md#shenzhen-jingcai-intelligent) | ESP32-4848S040C_I_Y_3 | +| [Waveshare](docs/Board_Instructions.md#waveshare) | ESP32-S3-Touch-LCD-4.3 | 欢迎开发者和厂商贡献 PR 来添加更多的开发板，详细说明请参考 [`开发板贡献指南`](./docs/Board_Contribution_Guide_CN.md)。 diff --git a/docs/Board_Instructions.md b/docs/Board_Instructions.md index 05dcb8a6..beb745bf 100644 --- a/docs/Board_Instructions.md +++ b/docs/Board_Instructions.md @@ -38,6 +38,12 @@ | :-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------: | :-----------------------------------------------------------------------------------------------------: | :--------------: | :----------------: | :----------------: | :-----------: | :------------------: | | [](https://www.displaysmodule.com/sale-41828962-experience-the-power-of-the-esp32-display-module-sku-esp32-4848s040c-i-y-3.html) | [ESP32-4848S040C_I_Y_3](http://pan.jczn1688.com/directlink/1/ESP32%20module/4.0inch_ESP32-4848S040.zip) | 3-wire SPI + RGB | ST7701 | 480x480 | I2C | GT911 | +## [Waveshare](https://www.waveshare.com/) + +| **Picture** | **Name** | **LCD Bus** | **LCD Controller** | **LCD resolution** | **Touch Bus** | **Touch Controller** | +| :-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------: | :-----------------------------------------------------------------------------------------------------: | :--------------: | :----------------: | ------------------ | :-----------: | :------------------: | +| | [ESP32-S3-Touch-LCD-4.3](https://www.waveshare.com/esp32-s3-touch-lcd-4.3.htm) | RGB | ST7262 | 800x480 | I2C | GT911 | + ## Recommended Configurations in the Arduino IDE Below are recommended configurations for developing GUI applications on different development boards. These settings can be adjusted according to specific requirements, and users can navigate to the `Tools` menu in the Arduino IDE to configure the following settings. @@ -59,6 +65,7 @@ Below are recommended configurations for developing GUI applications on differen | M5STACK-M5CORES3 | ESP32S3 Dev Module | OPI | QIO 80MHz | 16MB | Enabled | Default 4MB with spiffs | | ESP32-4848S040C_I_Y_3 | ESP32S3 Dev Module | OPI | QIO 80MHz | 16MB | Disabled | 16M Flash (3MB) | | ElecrowCrowPanel 7.0" | ESP32S3 Dev Module | OPI | QIO 80MHz | 4MB | Disabled | Huge App (3MB) | +| Waveshare-ESP32-S3-Touch-LCD-4.3 | ESP32S3 Dev Module | OPI | QIO 80MHz | 8MB | Disabled | 8M with spiffs | **Notes:** diff --git a/examples/LVGL/v8/Porting/ESP_Panel_Board_Supported.h b/examples/LVGL/v8/Porting/ESP_Panel_Board_Supported.h index 33853e08..58d065c3 100644 --- a/examples/LVGL/v8/Porting/ESP_Panel_Board_Supported.h +++ b/examples/LVGL/v8/Porting/ESP_Panel_Board_Supported.h @@ -74,6 +74,15 @@ */ // #define BOARD_ESP32_4848S040C_I_Y_3 +/* + * Waveshare Supported Boards (https://www.waveshare.com/): + * + * - ESP32_S3_Touch_LCD_4_3: + * - https://www.waveshare.com/esp32-s3-touch-lcd-4.3.htm + * + */ +// #define BOARD_WAVESHARE_ESP32_S3_Touch_LCD_4_3 + /** * Do not change the following versions, they are used to check if the configurations in this file are compatible with * the current version of `ESP_Panel_Board_Supported.h` in the library. The detailed rules are as follows: diff --git a/examples/LVGL/v8/Rotation/ESP_Panel_Board_Supported.h b/examples/LVGL/v8/Rotation/ESP_Panel_Board_Supported.h index 33853e08..58d065c3 100644 --- a/examples/LVGL/v8/Rotation/ESP_Panel_Board_Supported.h +++ b/examples/LVGL/v8/Rotation/ESP_Panel_Board_Supported.h @@ -74,6 +74,15 @@ */ // #define BOARD_ESP32_4848S040C_I_Y_3 +/* + * Waveshare Supported Boards (https://www.waveshare.com/): + * + * - ESP32_S3_Touch_LCD_4_3: + * - https://www.waveshare.com/esp32-s3-touch-lcd-4.3.htm + * + */ +// #define BOARD_WAVESHARE_ESP32_S3_Touch_LCD_4_3 + /** * Do not change the following versions, they are used to check if the configurations in this file are compatible with * the current version of `ESP_Panel_Board_Supported.h` in the library. The detailed rules are as follows: diff --git a/examples/Panel/PanelTest/ESP_Panel_Board_Supported.h b/examples/Panel/PanelTest/ESP_Panel_Board_Supported.h index 33853e08..58d065c3 100644 --- a/examples/Panel/PanelTest/ESP_Panel_Board_Supported.h +++ b/examples/Panel/PanelTest/ESP_Panel_Board_Supported.h @@ -74,6 +74,15 @@ */ // #define BOARD_ESP32_4848S040C_I_Y_3 +/* + * Waveshare Supported Boards (https://www.waveshare.com/): + * + * - ESP32_S3_Touch_LCD_4_3: + * - https://www.waveshare.com/esp32-s3-touch-lcd-4.3.htm + * + */ +// #define BOARD_WAVESHARE_ESP32_S3_Touch_LCD_4_3 + /** * Do not change the following versions, they are used to check if the configurations in this file are compatible with * the current version of `ESP_Panel_Board_Supported.h` in the library. The detailed rules are as follows: diff --git a/examples/PlatformIO/src/ESP_Panel_Board_Supported.h b/examples/PlatformIO/src/ESP_Panel_Board_Supported.h index 33853e08..58d065c3 100644 --- a/examples/PlatformIO/src/ESP_Panel_Board_Supported.h +++ b/examples/PlatformIO/src/ESP_Panel_Board_Supported.h @@ -74,6 +74,15 @@ */ // #define BOARD_ESP32_4848S040C_I_Y_3 +/* + * Waveshare Supported Boards (https://www.waveshare.com/): + * + * - ESP32_S3_Touch_LCD_4_3: + * - https://www.waveshare.com/esp32-s3-touch-lcd-4.3.htm + * + */ +// #define BOARD_WAVESHARE_ESP32_S3_Touch_LCD_4_3 + /** * Do not change the following versions, they are used to check if the configurations in this file are compatible with * the current version of `ESP_Panel_Board_Supported.h` in the library. The detailed rules are as follows: diff --git a/examples/SquareLine/v8/Porting/ESP_Panel_Board_Supported.h b/examples/SquareLine/v8/Porting/ESP_Panel_Board_Supported.h index 33853e08..58d065c3 100644 --- a/examples/SquareLine/v8/Porting/ESP_Panel_Board_Supported.h +++ b/examples/SquareLine/v8/Porting/ESP_Panel_Board_Supported.h @@ -74,6 +74,15 @@ */ // #define BOARD_ESP32_4848S040C_I_Y_3 +/* + * Waveshare Supported Boards (https://www.waveshare.com/): + * + * - ESP32_S3_Touch_LCD_4_3: + * - https://www.waveshare.com/esp32-s3-touch-lcd-4.3.htm + * + */ +// #define BOARD_WAVESHARE_ESP32_S3_Touch_LCD_4_3 + /** * Do not change the following versions, they are used to check if the configurations in this file are compatible with * the current version of `ESP_Panel_Board_Supported.h` in the library. The detailed rules are as follows: diff --git a/examples/SquareLine/v8/WiFiClock/ESP_Panel_Board_Supported.h b/examples/SquareLine/v8/WiFiClock/ESP_Panel_Board_Supported.h index 33853e08..58d065c3 100644 --- a/examples/SquareLine/v8/WiFiClock/ESP_Panel_Board_Supported.h +++ b/examples/SquareLine/v8/WiFiClock/ESP_Panel_Board_Supported.h @@ -74,6 +74,15 @@ */ // #define BOARD_ESP32_4848S040C_I_Y_3 +/* + * Waveshare Supported Boards (https://www.waveshare.com/): + * + * - ESP32_S3_Touch_LCD_4_3: + * - https://www.waveshare.com/esp32-s3-touch-lcd-4.3.htm + * + */ +// #define BOARD_WAVESHARE_ESP32_S3_Touch_LCD_4_3 + /** * Do not change the following versions, they are used to check if the configurations in this file are compatible with * the current version of `ESP_Panel_Board_Supported.h` in the library. The detailed rules are as follows: diff --git a/src/ESP_PanelVersions.h b/src/ESP_PanelVersions.h index 25584c5b..e0b3ffff 100644 --- a/src/ESP_PanelVersions.h +++ b/src/ESP_PanelVersions.h @@ -56,7 +56,7 @@ !defined(ESP_PANEL_BOARD_SUPPORTED_FILE_VERSION_MINOR) && \ !defined(ESP_PANEL_BOARD_SUPPORTED_FILE_VERSION_PATCH) #define ESP_PANEL_BOARD_SUPPORTED_FILE_VERSION_MAJOR 0 -#define ESP_PANEL_BOARD_SUPPORTED_FILE_VERSION_MINOR 1 +#define ESP_PANEL_BOARD_SUPPORTED_FILE_VERSION_MINOR 2 #define ESP_PANEL_BOARD_SUPPORTED_FILE_VERSION_PATCH 0 #endif // Check if the current configuration file version is compatible with the library version diff --git a/src/board/ESP_PanelBoard.h b/src/board/ESP_PanelBoard.h index 1ecb59b7..95a95de0 100644 --- a/src/board/ESP_PanelBoard.h +++ b/src/board/ESP_PanelBoard.h @@ -13,9 +13,9 @@ defined(BOARD_ESP32_S3_BOX_3_BETA) + defined(BOARD_ESP32_S3_BOX_LITE) + defined(BOARD_ESP32_S3_EYE) + \ defined(BOARD_ESP32_S3_KORVO_2) + defined(BOARD_ESP32_S3_LCD_EV_BOARD) + \ defined(BOARD_ESP32_S3_LCD_EV_BOARD_V1_5) + defined(BOARD_ESP32_S3_LCD_EV_BOARD_2) + \ - defined(BOARD_ESP32_S3_LCD_EV_BOARD_2_V1_5) + defined(BOARD_ESP32_S3_USB_OTG) + \ + defined(BOARD_ESP32_S3_LCD_EV_BOARD_2_V1_5) + defined(BOARD_ESP32_S3_USB_OTG) + defined(BOARD_ELECROW_CROWPANEL_7_0) \ defined(BOARD_M5STACK_M5CORE2) + defined(BOARD_M5STACK_M5DIAL) + defined(BOARD_M5STACK_M5CORES3) + \ - defined(BOARD_ESP32_4848S040C_I_Y_3) \ + defined(BOARD_ESP32_4848S040C_I_Y_3) + defined(BOARD_WAVESHARE_ESP32_S3_Touch_LCD_4_3) \ > 1 #error "Multiple boards enabled! Please check file `ESP_Panel_Board_Supported.h` and make sure only one board is enabled." #endif @@ -59,6 +59,9 @@ /* Jingcai */ #elif defined(BOARD_ESP32_4848S040C_I_Y_3) || CONFIG_BOARD_ESP32_4848S040C_I_Y_3 #include "board/jingcai/ESP32_4848S040C_I_Y_3.h" +/* Waveshare */ +#elif defined(BOARD_WAVESHARE_ESP32_S3_Touch_LCD_4_3) || CONFIG_BOARD_WAVESHARE_ESP32_S3_Touch_LCD_4_3 + #include "board/waveshare/ESP32_S3_Touch_LCD_4.3.h" #else #error "Unkonw board selected! Please check file `ESP_Panel_Board_Supported.h` and make sure only one board is enabled." #endif diff --git a/src/board/waveshare/ESP32_S3_Touch_LCD_4.3.h b/src/board/waveshare/ESP32_S3_Touch_LCD_4.3.h new file mode 100644 index 00000000..3b2f72c2 --- /dev/null +++ b/src/board/waveshare/ESP32_S3_Touch_LCD_4.3.h @@ -0,0 +1,271 @@ +/* + * SPDX-FileCopyrightText: 2023-2024 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#pragma once + +// *INDENT-OFF* + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//////////////////////////// Please update the following macros to configure the LCD panel ///////////////////////////// +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +/* Set to 1 when using an LCD panel */ +#define ESP_PANEL_USE_LCD (1) // 0/1 + +#if ESP_PANEL_USE_LCD +/** + * LCD Controller Name + */ +#define ESP_PANEL_LCD_NAME ST7262 + +/* LCD resolution in pixels */ +#define ESP_PANEL_LCD_WIDTH (800) +#define ESP_PANEL_LCD_HEIGHT (480) + +/* LCD Bus Settings */ +/** + * If set to 1, the bus will skip to initialize the corresponding host. Users need to initialize the host in advance. + * It is useful if other devices use the same host. Please ensure that the host is initialized only once. + */ +#define ESP_PANEL_LCD_BUS_SKIP_INIT_HOST (1) // 0/1 +/** + * LCD Bus Type. + */ +#define ESP_PANEL_LCD_BUS_TYPE (ESP_PANEL_BUS_TYPE_RGB) +/** + * LCD Bus Parameters. + * + * Please refer to https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/api-reference/peripherals/lcd.html and + * https://docs.espressif.com/projects/esp-iot-solution/en/latest/display/lcd/index.html for more details. + * + */ +#if ESP_PANEL_LCD_BUS_TYPE == ESP_PANEL_BUS_TYPE_RGB + + #define ESP_PANEL_LCD_RGB_CLK_HZ (16 * 1000 * 1000) + #define ESP_PANEL_LCD_RGB_HPW (4) + #define ESP_PANEL_LCD_RGB_HBP (8) + #define ESP_PANEL_LCD_RGB_HFP (8) + #define ESP_PANEL_LCD_RGB_VPW (4) + #define ESP_PANEL_LCD_RGB_VBP (8) + #define ESP_PANEL_LCD_RGB_VFP (8) + #define ESP_PANEL_LCD_RGB_PCLK_ACTIVE_NEG (1) // 0: rising edge, 1: falling edge + + // | 8-bit RGB888 | 16-bit RGB565 | + // |--------------|---------------| + #define ESP_PANEL_LCD_RGB_DATA_WIDTH (16) // | 8 | 16 | + #define ESP_PANEL_LCD_RGB_PIXEL_BITS (16) // | 24 | 16 | + #define ESP_PANEL_LCD_RGB_FRAME_BUF_NUM (1) // 1/2/3 + #define ESP_PANEL_LCD_RGB_BOUNCE_BUF_SIZE (ESP_PANEL_LCD_WIDTH * 10) // Bounce buffer size in bytes. This function is used to avoid screen drift. + // To enable the bounce buffer, set it to a non-zero value. Typically set to `ESP_PANEL_LCD_WIDTH * 10` + // The size of the Bounce Buffer must satisfy `width_of_lcd * height_of_lcd = size_of_buffer * N`, + // where N is an even number. + #define ESP_PANEL_LCD_RGB_IO_HSYNC (46) + #define ESP_PANEL_LCD_RGB_IO_VSYNC (3) + #define ESP_PANEL_LCD_RGB_IO_DE (5) // -1 if not used + #define ESP_PANEL_LCD_RGB_IO_PCLK (7) + #define ESP_PANEL_LCD_RGB_IO_DISP (-1) // -1 if not used + + // | RGB565 | RGB666 | RGB888 | + // |--------|--------|--------| + #define ESP_PANEL_LCD_RGB_IO_DATA0 (14) // | B0 | B0-1 | B0-3 | + #define ESP_PANEL_LCD_RGB_IO_DATA1 (38) // | B1 | B2 | B4 | + #define ESP_PANEL_LCD_RGB_IO_DATA2 (18) // | B2 | B3 | B5 | + #define ESP_PANEL_LCD_RGB_IO_DATA3 (17) // | B3 | B4 | B6 | + #define ESP_PANEL_LCD_RGB_IO_DATA4 (10) // | B4 | B5 | B7 | + #define ESP_PANEL_LCD_RGB_IO_DATA5 (39) // | G0 | G0 | G0-2 | + #define ESP_PANEL_LCD_RGB_IO_DATA6 (0) // | G1 | G1 | G3 | + #define ESP_PANEL_LCD_RGB_IO_DATA7 (45) // | G2 | G2 | G4 | +#if ESP_PANEL_LCD_RGB_DATA_WIDTH > 8 + #define ESP_PANEL_LCD_RGB_IO_DATA8 (48) // | G3 | G3 | G5 | + #define ESP_PANEL_LCD_RGB_IO_DATA9 (47) // | G4 | G4 | G6 | + #define ESP_PANEL_LCD_RGB_IO_DATA10 (21) // | G5 | G5 | G7 | + #define ESP_PANEL_LCD_RGB_IO_DATA11 (1) // | R0 | R0-1 | R0-3 | + #define ESP_PANEL_LCD_RGB_IO_DATA12 (2) // | R1 | R2 | R4 | + #define ESP_PANEL_LCD_RGB_IO_DATA13 (42) // | R2 | R3 | R5 | + #define ESP_PANEL_LCD_RGB_IO_DATA14 (41) // | R3 | R4 | R6 | + #define ESP_PANEL_LCD_RGB_IO_DATA15 (40) // | R4 | R5 | R7 | +#endif +#if !ESP_PANEL_LCD_BUS_SKIP_INIT_HOST + #define ESP_PANEL_LCD_3WIRE_SPI_IO_CS (0) + #define ESP_PANEL_LCD_3WIRE_SPI_IO_SCK (1) + #define ESP_PANEL_LCD_3WIRE_SPI_IO_SDA (2) + #define ESP_PANEL_LCD_3WIRE_SPI_CS_USE_EXPNADER (0) // 0/1 + #define ESP_PANEL_LCD_3WIRE_SPI_SCL_USE_EXPNADER (0) // 0/1 + #define ESP_PANEL_LCD_3WIRE_SPI_SDA_USE_EXPNADER (0) // 0/1 + #define ESP_PANEL_LCD_3WIRE_SPI_SCL_ACTIVE_EDGE (0) // 0: rising edge, 1: falling edge + #define ESP_PANEL_LCD_FLAGS_AUTO_DEL_PANEL_IO (0) // Delete the panel IO instance automatically if set to 1. + // If the 3-wire SPI pins are sharing other pins of the RGB interface to save GPIOs, + // Please set it to 1 to release the panel IO and its pins (except CS signal). + #define ESP_PANEL_LCD_FLAGS_MIRROR_BY_CMD (!ESP_PANEL_LCD_FLAGS_AUTO_DEL_PANEL_IO) + // The `mirror()` function will be implemented by LCD command if set to 1. +#endif + +#endif /* ESP_PANEL_LCD_BUS_TYPE */ + +/** + * LCD Vendor Initialization Commands. + * + * Vendor specific initialization can be different between manufacturers, should consult the LCD supplier for + * initialization sequence code. Please uncomment and change the following macro definitions. Otherwise, the LCD driver + * will use the default initialization sequence code. + * + * There are two formats for the sequence code: + * 1. Raw data: {command, (uint8_t []){ data0, data1, ... }, data_size, delay_ms} + * 2. Formater: ESP_PANEL_LCD_CMD_WITH_8BIT_PARAM(delay_ms, command, { data0, data1, ... }) and + * ESP_PANEL_LCD_CMD_WITH_NONE_PARAM(delay_ms, command) + */ +// #define ESP_PANEL_LCD_VENDOR_INIT_CMD \ +// { \ +// {0xFF, (uint8_t []){0x77, 0x01, 0x00, 0x00, 0x10}, 5, 0}, \ +// {0xC0, (uint8_t []){0x3B, 0x00}, 2, 0}, \ +// {0xC1, (uint8_t []){0x0D, 0x02}, 2, 0}, \ +// {0x29, (uint8_t []){0x00}, 0, 120}, \ +// or \ +// ESP_PANEL_LCD_CMD_WITH_8BIT_PARAM(0, 0xFF, {0x77, 0x01, 0x00, 0x00, 0x10}), \ +// ESP_PANEL_LCD_CMD_WITH_8BIT_PARAM(0, 0xC0, {0x3B, 0x00}), \ +// ESP_PANEL_LCD_CMD_WITH_8BIT_PARAM(0, 0xC1, {0x0D, 0x02}), \ +// ESP_PANEL_LCD_CMD_WITH_NONE_PARAM(120, 0x29), \ +// } + +/* LCD Color Settings */ +/* LCD color depth in bits */ +#define ESP_PANEL_LCD_COLOR_BITS (18) // 8/16/18/24 +/* + * LCD RGB Element Order. Choose one of the following: + * - 0: RGB + * - 1: BGR + */ +#define ESP_PANEL_LCD_BGR_ORDER (0) // 0/1 +#define ESP_PANEL_LCD_INEVRT_COLOR (0) // 0/1 + +/* LCD Transformation Flags */ +#define ESP_PANEL_LCD_SWAP_XY (0) // 0/1 +#define ESP_PANEL_LCD_MIRROR_X (0) // 0/1 +#define ESP_PANEL_LCD_MIRROR_Y (0) // 0/1 + +/* LCD Other Settings */ +/* IO num of RESET pin, set to -1 if not use */ +#define ESP_PANEL_LCD_IO_RST (-1) +#define ESP_PANEL_LCD_RST_LEVEL (0) // 0: low level, 1: high level + +#endif /* ESP_PANEL_USE_LCD */ + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +//////////////////////////// Please update the following macros to configure the touch panel /////////////////////////// +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +/* Set to 1 when using an touch panel */ +#define ESP_PANEL_USE_TOUCH (1) // 0/1 +#if ESP_PANEL_USE_TOUCH +/** + * Touch controller name + */ +#define ESP_PANEL_TOUCH_NAME GT911 + +/* Touch resolution in pixels */ +#define ESP_PANEL_TOUCH_H_RES (ESP_PANEL_LCD_WIDTH) // Typically set to the same value as the width of LCD +#define ESP_PANEL_TOUCH_V_RES (ESP_PANEL_LCD_HEIGHT) // Typically set to the same value as the height of LCD + +/* Touch Panel Bus Settings */ +/** + * If set to 1, the bus will skip to initialize the corresponding host. Users need to initialize the host in advance. + * It is useful if other devices use the same host. Please ensure that the host is initialized only once. + */ +#define ESP_PANEL_TOUCH_BUS_SKIP_INIT_HOST (0) // 0/1 +/** + * Touch panel bus type + */ +#define ESP_PANEL_TOUCH_BUS_TYPE (ESP_PANEL_BUS_TYPE_I2C) +/* Touch panel bus parameters */ +#if ESP_PANEL_TOUCH_BUS_TYPE == ESP_PANEL_BUS_TYPE_I2C + + #define ESP_PANEL_TOUCH_BUS_HOST_ID (0) // Typically set to 0 + #define ESP_PANEL_TOUCH_I2C_ADDRESS (0) // For GT911, there are two addresses: 0x5D(default) and 0x14 +#if !ESP_PANEL_TOUCH_BUS_SKIP_INIT_HOST + #define ESP_PANEL_TOUCH_I2C_CLK_HZ (400 * 1000) + // Typically set to 400K + #define ESP_PANEL_TOUCH_I2C_SCL_PULLUP (1) // 0/1 + #define ESP_PANEL_TOUCH_I2C_SDA_PULLUP (1) // 0/1 + #define ESP_PANEL_TOUCH_I2C_IO_SCL (9) + #define ESP_PANEL_TOUCH_I2C_IO_SDA (8) +#endif + +#endif /* ESP_PANEL_TOUCH_BUS_TYPE */ + +/* Touch Transformation Flags */ +#define ESP_PANEL_TOUCH_SWAP_XY (0) // 0/1 +#define ESP_PANEL_TOUCH_MIRROR_X (0) // 0/1 +#define ESP_PANEL_TOUCH_MIRROR_Y (0) // 0/1 + +/* Touch Other Settings */ +/* IO num of RESET pin, set to -1 if not use */ +#define ESP_PANEL_TOUCH_IO_RST (-1) +#define ESP_PANEL_TOUCH_RST_LEVEL (0) // 0: low level, 1: high level +/* IO num of INT pin, set to -1 if not use */ +#define ESP_PANEL_TOUCH_IO_INT (-1) +#define ESP_PANEL_TOUCH_INT_LEVEL (0) // 0: low level, 1: high level + +#endif /* ESP_PANEL_USE_TOUCH */ + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////// Please update the following macros to configure the backlight //////////////////////////// +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +#define ESP_PANEL_USE_BACKLIGHT (0) // 0/1 +#if ESP_PANEL_USE_BACKLIGHT +/* IO num of backlight pin */ +#define ESP_PANEL_BACKLIGHT_IO (-1) +#define ESP_PANEL_BACKLIGHT_ON_LEVEL (1) // 0: low level, 1: high level + +/* Set to 1 if turn off the backlight after initializing the panel; otherwise, set it to turn on */ +#define ESP_PANEL_BACKLIGHT_IDLE_OFF (0) // 0: on, 1: off + +/* Set to 1 if use PWM for brightness control */ +#define ESP_PANEL_LCD_BL_USE_PWM (0) // 0/1 +#endif /* ESP_PANEL_USE_BACKLIGHT */ + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////// Please update the following macros to configure the IO expander ////////////////////////// +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +/* Set to 0 if not using IO Expander */ +#define ESP_PANEL_USE_EXPANDER (1) // 0/1 +#if ESP_PANEL_USE_EXPANDER +/** + * IO expander name. + */ +#define ESP_PANEL_EXPANDER_NAME CH422G + +/* IO expander Settings */ +/** + * If set to 1, the driver will skip to initialize the corresponding host. Users need to initialize the host in advance. + * It is useful if other devices use the same host. Please ensure that the host is initialized only once. + */ +#define ESP_PANEL_EXPANDER_SKIP_INIT_HOST (1) // 0/1 +/* IO expander parameters */ +#define ESP_PANEL_EXPANDER_HOST_ID (0) // Typically set to 0 +#define ESP_PANEL_EXPANDER_I2C_ADDRESS (0x20) +#if !ESP_PANEL_EXPANDER_SKIP_INIT_HOST + #define ESP_PANEL_EXPANDER_I2C_CLK_HZ (400 * 1000) + // Typically set to 400K + #define ESP_PANEL_EXPANDER_I2C_SCL_PULLUP (1) // 0/1 + #define ESP_PANEL_EXPANDER_I2C_SDA_PULLUP (1) // 0/1 + #define ESP_PANEL_EXPANDER_I2C_IO_SCL (18) + #define ESP_PANEL_EXPANDER_I2C_IO_SDA (8) +#endif +#endif /* ESP_PANEL_USE_EXPANDER */ + +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +///////////////////////////// Please utilize the following macros to execute any additional code if required. ////////// +//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////// +// #define ESP_PANEL_BEGIN_START_FUNCTION( panel ) +// #define ESP_PANEL_BEGIN_EXPANDER_START_FUNCTION( panel ) +// #define ESP_PANEL_BEGIN_EXPANDER_END_FUNCTION( panel ) +// #define ESP_PANEL_BEGIN_LCD_START_FUNCTION( panel ) +// #define ESP_PANEL_BEGIN_LCD_END_FUNCTION( panel ) +// #define ESP_PANEL_BEGIN_TOUCH_START_FUNCTION( panel ) +// #define ESP_PANEL_BEGIN_TOUCH_END_FUNCTION( panel ) +// #define ESP_PANEL_BEGIN_BACKLIGHT_START_FUNCTION( panel ) +// #define ESP_PANEL_BEGIN_BACKLIGHT_END_FUNCTION( panel ) +// #define ESP_PANEL_BEGIN_END_FUNCTION( panel ) + +// *INDENT-OFF*