diff --git a/.github/scripts/sketch_utils.sh b/.github/scripts/sketch_utils.sh
index 00d7d1bc232..e536da50111 100755
--- a/.github/scripts/sketch_utils.sh
+++ b/.github/scripts/sketch_utils.sh
@@ -244,7 +244,7 @@ function build_sketch { # build_sketch <ide_path> <user_path> <path-to-ino> [ext
         build_dir="$ARDUINO_BUILD_DIR"
     elif [ "$len" -eq 1 ]; then
         # build_dir="$sketchdir/build"
-        build_dir="$HOME/.arduino/tests/$sketchname/build.tmp"
+        build_dir="$HOME/.arduino/tests/$target/$sketchname/build.tmp"
     fi
 
     output_file="$HOME/.arduino/cli_compile_output.txt"
@@ -254,7 +254,7 @@ function build_sketch { # build_sketch <ide_path> <user_path> <path-to-ino> [ext
     for i in $(seq 0 $((len - 1))); do
         if [ "$len" -ne 1 ]; then
             # build_dir="$sketchdir/build$i"
-            build_dir="$HOME/.arduino/tests/$sketchname/build$i.tmp"
+            build_dir="$HOME/.arduino/tests/$target/$sketchname/build$i.tmp"
         fi
         rm -rf "$build_dir"
         mkdir -p "$build_dir"
diff --git a/.github/scripts/tests_run.sh b/.github/scripts/tests_run.sh
index 513fd16b371..1c4bee79742 100755
--- a/.github/scripts/tests_run.sh
+++ b/.github/scripts/tests_run.sh
@@ -11,9 +11,11 @@ function run_test {
     local error=0
     local sdkconfig_path
     local extra_args
+    local test_type
 
     sketchdir=$(dirname "$sketch")
     sketchname=$(basename "$sketchdir")
+    test_type=$(basename "$(dirname "$sketchdir")")
 
     if [ "$options" -eq 0 ] && [ -f "$sketchdir"/ci.json ]; then
         len=$(jq -r --arg target "$target" '.fqbn[$target] | length' "$sketchdir"/ci.json)
@@ -25,9 +27,9 @@ function run_test {
     fi
 
     if [ "$len" -eq 1 ]; then
-        sdkconfig_path="$HOME/.arduino/tests/$sketchname/build.tmp/sdkconfig"
+        sdkconfig_path="$HOME/.arduino/tests/$target/$sketchname/build.tmp/sdkconfig"
     else
-        sdkconfig_path="$HOME/.arduino/tests/$sketchname/build0.tmp/sdkconfig"
+        sdkconfig_path="$HOME/.arduino/tests/$target/$sketchname/build0.tmp/sdkconfig"
     fi
 
     if [ -f "$sketchdir"/ci.json ]; then
@@ -43,22 +45,22 @@ function run_test {
     fi
 
     if [ ! -f "$sdkconfig_path" ]; then
-        printf "\033[93mSketch %s not built\nMight be due to missing target requirements or build failure\033[0m\n" "$sketchname"
+        printf "\033[93mSketch %s build not found in %s\nMight be due to missing target requirements or build failure\033[0m\n" "$(dirname "$sdkconfig_path")" "$sketchname"
         printf "\n\n\n"
         return 0
     fi
 
-    local right_target
-    right_target=$(grep -E "^CONFIG_IDF_TARGET=\"$target\"$" "$sdkconfig_path")
-    if [ -z "$right_target" ]; then
-        printf "\033[91mError: Sketch %s compiled for different target\n\033[0m\n" "$sketchname"
+    local compiled_target
+    compiled_target=$(grep -E "CONFIG_IDF_TARGET=" "$sdkconfig_path" | cut -d'"' -f2)
+    if [ "$compiled_target" != "$target" ]; then
+        printf "\033[91mError: Sketch %s compiled for %s, expected %s\033[0m\n" "$sketchname" "$compiled_target" "$target"
         printf "\n\n\n"
         return 1
     fi
 
     if [ "$len" -eq 1 ]; then
         # build_dir="$sketchdir/build"
-        build_dir="$HOME/.arduino/tests/$sketchname/build.tmp"
+        build_dir="$HOME/.arduino/tests/$target/$sketchname/build.tmp"
         report_file="$sketchdir/$target/$sketchname.xml"
     fi
 
@@ -81,7 +83,7 @@ function run_test {
 
         if [ "$len" -ne 1 ]; then
             # build_dir="$sketchdir/build$i"
-            build_dir="$HOME/.arduino/tests/$sketchname/build$i.tmp"
+            build_dir="$HOME/.arduino/tests/$target/$sketchname/build$i.tmp"
             report_file="$sketchdir/$target/$sketchname$i.xml"
         fi
 
@@ -113,14 +115,14 @@ function run_test {
         rm "$sketchdir"/diagram.json 2>/dev/null || true
 
         result=0
-        printf "\033[95mpytest \"%s/test_%s.py\" --build-dir \"%s\" --junit-xml=\"%s\" %s\033[0m\n" "$sketchdir" "$sketchname" "$build_dir" "$report_file" "${extra_args[*]@Q}"
-        bash -c "set +e; pytest \"$sketchdir/test_$sketchname.py\" --build-dir \"$build_dir\" --junit-xml=\"$report_file\" ${extra_args[*]@Q}; exit \$?" || result=$?
+        printf "\033[95mpytest \"%s/test_%s.py\" --build-dir \"%s\" --junit-xml=\"%s\" -o junit_suite_name=%s_%s_%s_%s%s %s\033[0m\n" "$sketchdir" "$sketchname" "$build_dir" "$report_file" "$test_type" "$platform" "$target" "$sketchname" "$i" "${extra_args[*]@Q}"
+        bash -c "set +e; pytest \"$sketchdir/test_$sketchname.py\" --build-dir \"$build_dir\" --junit-xml=\"$report_file\" -o junit_suite_name=${test_type}_${platform}_${target}_${sketchname}${i} ${extra_args[*]@Q}; exit \$?" || result=$?
         printf "\n"
         if [ $result -ne 0 ]; then
             result=0
             printf "\033[95mRetrying test: %s -- Config: %s\033[0m\n" "$sketchname" "$i"
-            printf "\033[95mpytest \"%s/test_%s.py\" --build-dir \"%s\" --junit-xml=\"%s\" %s\033[0m\n" "$sketchdir" "$sketchname" "$build_dir" "$report_file" "${extra_args[*]@Q}"
-            bash -c "set +e; pytest \"$sketchdir/test_$sketchname.py\" --build-dir \"$build_dir\" --junit-xml=\"$report_file\" ${extra_args[*]@Q}; exit \$?" || result=$?
+            printf "\033[95mpytest \"%s/test_%s.py\" --build-dir \"%s\" --junit-xml=\"%s\" -o junit_suite_name=%s_%s_%s_%s%s %s\033[0m\n" "$sketchdir" "$sketchname" "$build_dir" "$report_file" "$test_type" "$platform" "$target" "$sketchname" "$i" "${extra_args[*]@Q}"
+            bash -c "set +e; pytest \"$sketchdir/test_$sketchname.py\" --build-dir \"$build_dir\" --junit-xml=\"$report_file\" -o junit_suite_name=${test_type}_${platform}_${target}_${sketchname}${i} ${extra_args[*]@Q}; exit \$?" || result=$?
             printf "\n"
             if [ $result -ne 0 ]; then
                 printf "\033[91mFailed test: %s -- Config: %s\033[0m\n\n" "$sketchname" "$i"
diff --git a/.github/workflows/allboards.yml b/.github/workflows/allboards.yml
index 8c4dadcd03e..6910ad05d3f 100644
--- a/.github/workflows/allboards.yml
+++ b/.github/workflows/allboards.yml
@@ -15,7 +15,7 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           ref: ${{ github.event.client_payload.branch }}
 
@@ -32,13 +32,13 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           ref: ${{ github.event.client_payload.branch }}
 
       - run: npm install
       - name: Setup jq
-        uses: dcarbone/install-jq-action@v1.0.1
+        uses: dcarbone/install-jq-action@e397bd87438d72198f81efd21f876461183d383a # v3.0.1
 
       - id: set-test-chunks
         name: Set Chunks
@@ -64,7 +64,7 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           ref: ${{ github.event.client_payload.branch }}
 
@@ -74,7 +74,7 @@ jobs:
           FQBN: ${{ toJSON(matrix.chunk) }}
 
       - name: Compile sketch
-        uses: P-R-O-C-H-Y/compile-sketches@main
+        uses: P-R-O-C-H-Y/compile-sketches@a62f069b92dc8f5053da4ac439ea6d1950cf6379 # main
         with:
           platforms: |
             ${{ env.REPOSITORY }}
diff --git a/.github/workflows/boards.yml b/.github/workflows/boards.yml
index a51c794cfb4..287e97219c4 100644
--- a/.github/workflows/boards.yml
+++ b/.github/workflows/boards.yml
@@ -22,10 +22,10 @@ jobs:
     steps:
       # This step makes the contents of the repository available to the workflow
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
 
       - name: Setup jq
-        uses: dcarbone/install-jq-action@v1.0.1
+        uses: dcarbone/install-jq-action@e397bd87438d72198f81efd21f876461183d383a # v3.0.1
 
       - name: Get board name
         run: bash .github/scripts/find_new_boards.sh ${{ github.repository }} ${{github.base_ref}}
@@ -47,7 +47,7 @@ jobs:
     steps:
       # This step makes the contents of the repository available to the workflow
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
 
       - name: Check if build.board is uppercase
         run: |
@@ -60,7 +60,7 @@ jobs:
           fi
 
       - name: Get libs cache
-        uses: actions/cache@v4
+        uses: actions/cache@5a3ec84eff668545956fd18022155c47e93e2684 # v4.2.3
         with:
           key: libs-${{ runner.os }}-${{ runner.arch }}-${{ hashFiles('package/package_esp32_index.template.json', 'tools/get.py') }}
           path: |
@@ -73,7 +73,7 @@ jobs:
             ./tools/xtensa-*
 
       - name: Compile sketch
-        uses: P-R-O-C-H-Y/compile-sketches@main
+        uses: P-R-O-C-H-Y/compile-sketches@a62f069b92dc8f5053da4ac439ea6d1950cf6379 # main
         with:
           platforms: |
             ${{ env.REPOSITORY }}
diff --git a/.github/workflows/build_py_tools.yml b/.github/workflows/build_py_tools.yml
index 48e7f2c82d3..bbb36589c84 100644
--- a/.github/workflows/build_py_tools.yml
+++ b/.github/workflows/build_py_tools.yml
@@ -12,13 +12,13 @@ on:
 jobs:
   find-changed-tools:
     name: Check if tools have been changed
-    runs-on: ubuntu-20.04
+    runs-on: ubuntu-latest
     outputs:
       any_changed: ${{ steps.verify-changed-files.outputs.any_changed }}
       all_changed_files: ${{ steps.verify-changed-files.outputs.all_changed_files }}
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           fetch-depth: 2
           ref: ${{ github.event.pull_request.head.ref }}
@@ -30,7 +30,7 @@ jobs:
           echo "Make sure you are using a branch inside the repository and not a fork."
 
       - name: Verify Python Tools Changed
-        uses: tj-actions/changed-files@v41
+        uses: tj-actions/changed-files@2f7c5bfce28377bc069a65ba478de0a74aa0ca32 # v46.0.1
         id: verify-changed-files
         with:
           fetch_depth: "2"
@@ -40,6 +40,7 @@ jobs:
             tools/espota.py
             tools/gen_esp32part.py
             tools/gen_insights_package.py
+
       - name: List all changed files
         shell: bash
         run: |
@@ -55,7 +56,7 @@ jobs:
     strategy:
       fail-fast: false
       matrix:
-        os: [windows-latest, macos-latest, ubuntu-20.04, ARM]
+        os: [windows-latest, macos-latest, ubuntu-latest, ubuntu-24.04-arm]
         include:
           - os: windows-latest
             TARGET: win64
@@ -64,14 +65,12 @@ jobs:
           - os: macos-latest
             TARGET: macos
             SEPARATOR: ":"
-          - os: ubuntu-20.04
+          - os: ubuntu-latest
             TARGET: linux-amd64
             SEPARATOR: ":"
-          - os: ARM
-            CONTAINER: python:3.8-bullseye
+          - os: ubuntu-24.04-arm
             TARGET: arm
             SEPARATOR: ":"
-    container: ${{ matrix.CONTAINER }} # use python container on ARM
     env:
       DISTPATH: pytools-${{ matrix.TARGET }}
       PIP_EXTRA_INDEX_URL: "https://dl.espressif.com/pypi"
@@ -90,27 +89,30 @@ jobs:
           for tool in ${{ env.CHANGED_TOOLS }}; do
             echo "tool $tool was changed"
           done
+
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           token: ${{ secrets.TOOLS_UPLOAD_PAT }}
           ref: ${{ github.event.pull_request.head.ref }}
+
       - name: Set up Python 3.8
-        # Skip setting python on ARM because of missing compatibility: https://github.com/actions/setup-python/issues/108
-        if: matrix.os != 'ARM'
-        uses: actions/setup-python@master
+        uses: actions/setup-python@42375524e23c412d93fb67b49958b491fce71c38 # v5.0.4
         with:
           python-version: 3.8
+
       - name: Install dependencies
         run: |
           python -m pip install --upgrade pip
           pip install pyinstaller requests
+
       - name: Build with PyInstaller
         shell: bash
         run: |
           for tool in ${{ env.CHANGED_TOOLS }}; do
             pyinstaller --distpath ./${{ env.DISTPATH }} -F --icon=.github/pytools/espressif.ico tools/$tool.py
           done
+
       - name: Sign binaries
         if: matrix.os == 'windows-latest'
         env:
@@ -123,12 +125,14 @@ jobs:
           {
             ./.github/pytools/Sign-File.ps1 -Path ./${{ env.DISTPATH }}/$node.exe
           }
+
       - name: Test binaries
         shell: bash
         run: |
           for tool in ${{ env.CHANGED_TOOLS }}; do
             ./${{ env.DISTPATH }}/$tool${{ matrix.EXTEN }} -h
           done
+
       - name: Push binary to tools
         if: matrix.os == 'windows-latest'
         env:
@@ -139,8 +143,9 @@ jobs:
             cp -f ./${{ env.DISTPATH }}/$tool.exe tools/$tool.exe
           done
           bash .github/scripts/upload_py_tools.sh "${{ env.CHANGED_TOOLS }}"
+
       - name: Archive artifact
-        uses: actions/upload-artifact@master
+        uses: actions/upload-artifact@ea165f8d65b6e75b540449e92b4886f43607fa02 # v4.6.2
         with:
           name: ${{ env.DISTPATH }}
           path: ${{ env.DISTPATH }}
diff --git a/.github/workflows/dangerjs.yml b/.github/workflows/dangerjs.yml
index 8fa7b737317..13bc907566b 100644
--- a/.github/workflows/dangerjs.yml
+++ b/.github/workflows/dangerjs.yml
@@ -12,12 +12,12 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Check out PR head
-        uses: actions/checkout@v4
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           ref: ${{ github.event.pull_request.head.sha }}
 
       - name: DangerJS pull request linter
-        uses: espressif/shared-github-dangerjs@v1
+        uses: espressif/shared-github-dangerjs@fb17367fd3e8ff7412603b8e946d9b19ffdb2d7f # v1
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
         with:
diff --git a/.github/workflows/docs_build.yml b/.github/workflows/docs_build.yml
index d2f12e1f7b5..d9b9f160228 100644
--- a/.github/workflows/docs_build.yml
+++ b/.github/workflows/docs_build.yml
@@ -21,14 +21,16 @@ jobs:
       run:
         shell: bash
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           submodules: true
-      - uses: actions/setup-python@v5
+
+      - uses: actions/setup-python@42375524e23c412d93fb67b49958b491fce71c38 # v5.0.4
         with:
           cache-dependency-path: docs/requirements.txt
           cache: "pip"
           python-version: "3.10"
+
       - name: Build
         run: |
           sudo apt update
@@ -38,8 +40,9 @@ jobs:
           cd ./docs
           PATH=/home/runner/.local/bin:$PATH pip3 install -r requirements.txt --prefer-binary
           PATH=/home/runner/.local/bin:$PATH SPHINXOPTS="-W" build-docs -l en
+
       - name: Archive Docs
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@ea165f8d65b6e75b540449e92b4886f43607fa02 # v4.6.2
         with:
           name: docs
           path: docs
diff --git a/.github/workflows/docs_deploy.yml b/.github/workflows/docs_deploy.yml
index b558fd21aa5..9f45e35aef8 100644
--- a/.github/workflows/docs_deploy.yml
+++ b/.github/workflows/docs_deploy.yml
@@ -26,14 +26,17 @@ jobs:
         run: |
           echo "Release workflow failed. Exiting..."
           exit 1
-      - uses: actions/checkout@v4
+
+      - uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           submodules: true
-      - uses: actions/setup-python@v5
+
+      - uses: actions/setup-python@42375524e23c412d93fb67b49958b491fce71c38 # v5.0.4
         with:
           cache-dependency-path: docs/requirements.txt
           cache: "pip"
           python-version: "3.10"
+
       - name: Deploy Documentation
         env:
           # Deploy to production server
diff --git a/.github/workflows/gh-pages.yml b/.github/workflows/gh-pages.yml
index 47480e8239a..60795229eff 100644
--- a/.github/workflows/gh-pages.yml
+++ b/.github/workflows/gh-pages.yml
@@ -15,7 +15,9 @@ jobs:
     name: Build GitHub Pages
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v4
+      - name: Checkout repository
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+
       - name: Copy Files
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
diff --git a/.github/workflows/lib.json b/.github/workflows/lib.json
index 9b528e4cc43..5b93d6689ef 100644
--- a/.github/workflows/lib.json
+++ b/.github/workflows/lib.json
@@ -23,16 +23,44 @@
         ]
     },
     {
-        "source-url": "https://github.com/me-no-dev/ESPAsyncWebServer.git",
+        "source-url": "https://github.com/ESP32Async/ESPAsyncWebServer.git",
         "required-libs": [
-            {"source-url": "https://github.com/me-no-dev/AsyncTCP.git"}
+            {"source-url": "https://github.com/ESP32Async/AsyncTCP.git"}
         ],
         "exclude_targets": [],
         "sketch_path": [
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/Auth/Auth.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/CORS/CORS.ino",
             "~/Arduino/libraries/ESPAsyncWebServer/examples/CaptivePortal/CaptivePortal.ino",
-            "~/Arduino/libraries/ESPAsyncWebServer/examples/ESP_AsyncFSBrowser/ESP_AsyncFSBrowser.ino",
-            "~/Arduino/libraries/ESPAsyncWebServer/examples/regex_patterns/regex_patterns.ino",
-            "~/Arduino/libraries/ESPAsyncWebServer/examples/simple_server/simple_server.ino"
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/CatchAllHandler/CatchAllHandler.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/ChunkResponse/ChunkResponse.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/ChunkRetryResponse/ChunkRetryResponse.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/EndBegin/EndBegin.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/Filters/Filters.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/FlashResponse/FlashResponse.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/HeaderManipulation/HeaderManipulation.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/Headers/Headers.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/Json/Json.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/Logging/Logging.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/MessagePack/MessagePack.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/Middleware/Middleware.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/Params/Params.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/PartitionDownloader/PartitionDownloader.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/PerfTests/PerfTests.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/RateLimit/RateLimit.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/Redirect/Redirect.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/RequestContinuation/RequestContinuation.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/RequestContinuationComplete/RequestContinuationComplete.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/ResumableDownload/ResumableDownload.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/Rewrite/Rewrite.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/ServerSentEvents/ServerSentEvents.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/ServerState/ServerState.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/SkipServerMiddleware/SkipServerMiddleware.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/SlowChunkResponse/SlowChunkResponse.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/StaticFile/StaticFile.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/Templates/Templates.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/Upload/Upload.ino",
+            "~/Arduino/libraries/ESPAsyncWebServer/examples/WebSocket/WebSocket.ino"
         ]
     },
     {
diff --git a/.github/workflows/lib.yml b/.github/workflows/lib.yml
index 1197308c921..0cb50842e5d 100644
--- a/.github/workflows/lib.yml
+++ b/.github/workflows/lib.yml
@@ -62,10 +62,10 @@ jobs:
     steps:
       # This step makes the contents of the repository available to the workflow
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
 
       - name: Compile sketch
-        uses: P-R-O-C-H-Y/compile-sketches@main
+        uses: P-R-O-C-H-Y/compile-sketches@a62f069b92dc8f5053da4ac439ea6d1950cf6379 # main
         with:
           platforms: |
             ${{ env.REPOSITORY }}
@@ -80,7 +80,7 @@ jobs:
             - --warnings="all"
 
       - name: Upload artifact
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@ea165f8d65b6e75b540449e92b4886f43607fa02 # v4.6.2
         with:
           name: ${{ env.SKETCHES_REPORTS_ARTIFACT_NAME }}-${{ matrix.target }}
           path: ${{ env.SKETCHES_REPORTS_PATH }}
@@ -92,7 +92,7 @@ jobs:
     steps:
       # Check out repository
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           token: ${{ env.GITHUB_TOKEN }}
           fetch-depth: "0"
@@ -102,14 +102,14 @@ jobs:
 
       # This step is needed to get the size data produced by the compile jobs
       - name: Download sketches reports artifact
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@95815c38cf2ff2164869cbab79da8d1f422bc89e # v4.2.1
         with:
           pattern: ${{ env.SKETCHES_REPORTS_ARTIFACT_NAME }}-*
           merge-multiple: true
           path: ${{ env.SKETCHES_REPORTS_PATH }}
 
       - name: Report results
-        uses: P-R-O-C-H-Y/report-size-deltas@main
+        uses: P-R-O-C-H-Y/report-size-deltas@4a79caa6dcc3579024293638b97156106edc588e # main
         with:
           sketches-reports-source: ${{ env.SKETCHES_REPORTS_PATH }}
           destination-file: ${{ env.RESULT_LIBRARY_TEST_FILE }}
@@ -136,8 +136,9 @@ jobs:
         env:
           PR_NUM: ${{ github.event.number }}
         run: echo $PR_NUM > pr_num.txt
+
       - name: Upload PR number
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@ea165f8d65b6e75b540449e92b4886f43607fa02 # v4.6.2
         with:
           name: pr_number
           path: ./pr_num.txt
diff --git a/.github/workflows/pre-commit-status.yml b/.github/workflows/pre-commit-status.yml
index d0060668476..c7be9f8d352 100644
--- a/.github/workflows/pre-commit-status.yml
+++ b/.github/workflows/pre-commit-status.yml
@@ -17,7 +17,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Report success
-        uses: actions/github-script@v7
+        uses: actions/github-script@60a0d83039c74a4aee543508d2ffcb1c3799cdea # v7.0.1
         with:
           script: |
             const owner = '${{ github.repository_owner }}';
@@ -43,7 +43,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Report pending
-        uses: actions/github-script@v7
+        uses: actions/github-script@60a0d83039c74a4aee543508d2ffcb1c3799cdea # v7.0.1
         with:
           script: |
             const owner = '${{ github.repository_owner }}';
diff --git a/.github/workflows/pre-commit.yml b/.github/workflows/pre-commit.yml
index dc009e445da..a3b858dd0fb 100644
--- a/.github/workflows/pre-commit.yml
+++ b/.github/workflows/pre-commit.yml
@@ -23,7 +23,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout latest commit
-        uses: actions/checkout@v4
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           fetch-depth: 2
 
@@ -34,7 +34,7 @@ jobs:
           GH_TOKEN: ${{ github.token }}
 
       - name: Set up Python 3
-        uses: actions/setup-python@v5
+        uses: actions/setup-python@42375524e23c412d93fb67b49958b491fce71c38 # v5.0.4
         with:
           cache-dependency-path: tools/pre-commit/requirements.txt
           cache: "pip"
@@ -46,7 +46,7 @@ jobs:
           echo "PY_HASH=$(python -VV | sha256sum | cut -d' ' -f1)" >> $GITHUB_ENV
 
       - name: Restore pre-commit cache
-        uses: actions/cache/restore@v4
+        uses: actions/cache/restore@5a3ec84eff668545956fd18022155c47e93e2684 # v4.2.3
         id: restore-cache
         with:
           path: |
@@ -58,13 +58,13 @@ jobs:
 
       - name: Get changed files
         id: changed-files
-        uses: tj-actions/changed-files@v42.0.2
+        uses: tj-actions/changed-files@2f7c5bfce28377bc069a65ba478de0a74aa0ca32 # v46.0.1
 
       - name: Run pre-commit hooks in changed files
         run: pre-commit run --color=always --show-diff-on-failure --files ${{ steps.changed-files.outputs.all_changed_files }}
 
       - name: Save pre-commit cache
-        uses: actions/cache/save@v4
+        uses: actions/cache/save@5a3ec84eff668545956fd18022155c47e93e2684 # v4.2.3
         if: ${{ always() && steps.restore-cache.outputs.cache-hit != 'true' }}
         continue-on-error: true
         with:
@@ -73,7 +73,7 @@ jobs:
           key: ${{ steps.restore-cache.outputs.cache-primary-key }}
 
       - name: Push changes using pre-commit-ci-lite
-        uses: pre-commit-ci/lite-action@v1.1.0
+        uses: pre-commit-ci/lite-action@5d6cc0eb514c891a40562a58a8e71576c5c7fb43 # v1.1.0
         # Only push changes in PRs
         if: ${{ always() && github.event_name == 'pull_request' }}
         with:
diff --git a/.github/workflows/publishlib.yml b/.github/workflows/publishlib.yml
index 62393b80915..0e1c3f64afd 100644
--- a/.github/workflows/publishlib.yml
+++ b/.github/workflows/publishlib.yml
@@ -44,12 +44,12 @@ jobs:
 
       - name: Read the pr_num file
         id: pr_num_reader
-        uses: juliangruber/read-file-action@v1
+        uses: juliangruber/read-file-action@b549046febe0fe86f8cb4f93c24e284433f9ab58 # v1.1.7
         with:
           path: ./artifacts/workflows/pr_num.txt
 
       - name: Report results
-        uses: P-R-O-C-H-Y/report-size-deltas@libs
+        uses: P-R-O-C-H-Y/report-size-deltas@256d1f13e4195cd7fd436d2f959e6dc4d5e4b406 # libs
         with:
           sketches-reports-source: ${{ env.SKETCHES_REPORTS_PATH }}
           github-token: ${{ env.GITHUB_TOKEN }}
diff --git a/.github/workflows/publishsizes-2.x.yml b/.github/workflows/publishsizes-2.x.yml
index ffbd751838c..738e215bc3f 100644
--- a/.github/workflows/publishsizes-2.x.yml
+++ b/.github/workflows/publishsizes-2.x.yml
@@ -14,8 +14,8 @@ jobs:
     name: Sizes Comparison Results
     runs-on: ubuntu-latest
     steps:
-      - name: Checkout code
-        uses: actions/checkout@v4 # This step checks out the repository's code at gh-pages branch
+      - name: Checkout gh-pages branch
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           ref: gh-pages
 
@@ -34,7 +34,7 @@ jobs:
           mv v2.x_cli_compile/*.json artifacts/sizes-report/master/
 
       - name: Report results
-        uses: P-R-O-C-H-Y/report-size-deltas@sizes_v2
+        uses: P-R-O-C-H-Y/report-size-deltas@2043188c68f483a7b50527c4eacf609d05bb67a5 # sizes_v2
         with:
           sketches-reports-source: ${{ env.SKETCHES_REPORTS_PATH }}
           github-token: ${{ env.GITHUB_TOKEN }}
diff --git a/.github/workflows/publishsizes.yml b/.github/workflows/publishsizes.yml
index 6c6d75eccce..69c18cf1835 100644
--- a/.github/workflows/publishsizes.yml
+++ b/.github/workflows/publishsizes.yml
@@ -21,8 +21,8 @@ jobs:
       github.event.workflow_run.conclusion == 'success'
 
     steps:
-      - name: Checkout code
-        uses: actions/checkout@v4 # This step checks out the repository's code at gh-pages branch
+      - name: Checkout gh-pages branch
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           ref: gh-pages
 
@@ -60,12 +60,12 @@ jobs:
 
       - name: Read the pr_num file
         id: pr_num_reader
-        uses: juliangruber/read-file-action@v1
+        uses: juliangruber/read-file-action@b549046febe0fe86f8cb4f93c24e284433f9ab58 # v1.1.7
         with:
           path: ./artifacts/sizes-report/pr_num.txt
 
       - name: Report results
-        uses: P-R-O-C-H-Y/report-size-deltas@sizes_v2
+        uses: P-R-O-C-H-Y/report-size-deltas@2043188c68f483a7b50527c4eacf609d05bb67a5 # sizes_v2
         with:
           sketches-reports-source: ${{ env.SKETCHES_REPORTS_PATH }}
           github-token: ${{ env.GITHUB_TOKEN }}
diff --git a/.github/workflows/push.yml b/.github/workflows/push.yml
index 2ca9e52e48d..d98da24fc07 100644
--- a/.github/workflows/push.yml
+++ b/.github/workflows/push.yml
@@ -45,12 +45,13 @@ on:
       - "!.github/scripts/tests_*"
       - "!.github/scripts/upload_*"
       - "variants/esp32/**/*"
-      - "variants/esp32s2/**/*"
-      - "variants/esp32s3/**/*"
       - "variants/esp32c2/**/*"
       - "variants/esp32c3/**/*"
       - "variants/esp32c6/**/*"
       - "variants/esp32h2/**/*"
+      - "variants/esp32p4/**/*"
+      - "variants/esp32s2/**/*"
+      - "variants/esp32s3/**/*"
 
 concurrency:
   group: build-${{github.event.pull_request.number || github.ref}}
@@ -65,7 +66,7 @@ jobs:
     runs-on: ubuntu-latest
     if: ${{ !(github.event_name == 'pull_request' && startsWith(github.head_ref, 'release/')) }}
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
       - run: bash ./.github/scripts/check-cmakelists.sh
 
   gen-chunks:
@@ -81,13 +82,13 @@ jobs:
       chunks: ${{ steps.set-chunks.outputs.chunks }}
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           fetch-depth: 2
 
       - name: Get changed files
         id: changed-files
-        uses: tj-actions/changed-files@v44
+        uses: tj-actions/changed-files@2f7c5bfce28377bc069a65ba478de0a74aa0ca32 # v46.0.1
         with:
           files_yaml: |
             core:
@@ -98,11 +99,12 @@ jobs:
               - 'platform.txt'
               - 'programmers.txt'
               - "variants/esp32/**/*"
-              - "variants/esp32s2/**/*"
-              - "variants/esp32s3/**/*"
               - "variants/esp32c3/**/*"
               - "variants/esp32c6/**/*"
               - "variants/esp32h2/**/*"
+              - "variants/esp32p4/**/*"
+              - "variants/esp32s2/**/*"
+              - "variants/esp32s3/**/*"
             libraries:
               - 'libraries/**/examples/**'
               - 'libraries/**/src/**'
@@ -142,7 +144,7 @@ jobs:
 
       - name: Upload sketches found
         if: ${{ steps.set-chunks.outputs.build_all == 'false' && steps.set-chunks.outputs.build_libraries == 'true' }}
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@ea165f8d65b6e75b540449e92b4886f43607fa02 # v4.6.2
         with:
           name: sketches_found
           path: sketches_found.txt
@@ -161,13 +163,13 @@ jobs:
         chunk: ${{ fromJson(needs.gen-chunks.outputs.chunks) }}
 
     steps:
-      - uses: actions/checkout@v4
-      - uses: actions/setup-python@v5
+      - uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+      - uses: actions/setup-python@42375524e23c412d93fb67b49958b491fce71c38 # v5.0.4
         with:
           python-version: "3.x"
 
       - name: Get libs cache
-        uses: actions/cache@v4
+        uses: actions/cache@5a3ec84eff668545956fd18022155c47e93e2684 # v4.2.3
         with:
           key: libs-${{ runner.os }}-${{ runner.arch }}-${{ hashFiles('package/package_esp32_index.template.json', 'tools/get.py') }}
           path: |
@@ -195,7 +197,7 @@ jobs:
 
       - name: Download sketches found
         if: ${{ needs.gen-chunks.outputs.build_all == 'false' && needs.gen-chunks.outputs.build_libraries == 'true' }}
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@95815c38cf2ff2164869cbab79da8d1f422bc89e # v4.2.1
         with:
           name: sketches_found
 
@@ -205,7 +207,7 @@ jobs:
 
       #Upload cli compile json as artifact
       - name: Upload cli compile json
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@ea165f8d65b6e75b540449e92b4886f43607fa02 # v4.6.2
         with:
           name: pr_cli_compile_${{ matrix.chunk }}
           path: cli_compile_${{ matrix.chunk }}.json
@@ -223,8 +225,8 @@ jobs:
         os: [windows-latest, macOS-latest]
 
     steps:
-      - uses: actions/checkout@v4
-      - uses: actions/setup-python@v5
+      - uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
+      - uses: actions/setup-python@42375524e23c412d93fb67b49958b491fce71c38 # v5.0.4
         with:
           python-version: "3.x"
       - name: Build Sketches
@@ -237,7 +239,7 @@ jobs:
       needs.gen-chunks.outputs.build_all == 'true' ||
       needs.gen-chunks.outputs.build_libraries == 'true' ||
       needs.gen-chunks.outputs.build_idf == 'true'
-    runs-on: ubuntu-20.04
+    runs-on: ubuntu-latest
     strategy:
       fail-fast: false
       matrix:
@@ -245,7 +247,7 @@ jobs:
         # See https://hub.docker.com/r/espressif/idf/tags and
         # https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/tools/idf-docker-image.html
         # for details.
-        idf_ver: ["release-v5.3"]
+        idf_ver: ["release-v5.4"]
         idf_target:
           [
             "esp32",
@@ -260,10 +262,11 @@ jobs:
     container: espressif/idf:${{ matrix.idf_ver }}
     steps:
       - name: Check out arduino-esp32 as a component
-        uses: actions/checkout@v4
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           submodules: recursive
           path: components/arduino-esp32
+
       - name: Build
         env:
           IDF_TARGET: ${{ matrix.idf_target }}
@@ -283,7 +286,7 @@ jobs:
     steps:
       # Check out repository
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           token: ${{secrets.GITHUB_TOKEN}}
           fetch-depth: "0"
@@ -292,7 +295,7 @@ jobs:
         run: git checkout remotes/origin/gh-pages
 
       - name: Download sketches reports artifact
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@95815c38cf2ff2164869cbab79da8d1f422bc89e # v4.2.1
         with:
           pattern: pr_cli_compile_*
           merge-multiple: true
@@ -322,8 +325,9 @@ jobs:
         env:
           PR_NUM: ${{ github.event.number }}
         run: echo $PR_NUM > pr_num.txt
+
       - name: Upload PR number
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@ea165f8d65b6e75b540449e92b4886f43607fa02 # v4.6.2
         with:
           name: pr_number
           path: ./pr_num.txt
diff --git a/.github/workflows/release.yml b/.github/workflows/release.yml
index 53a512dd54f..7b23c80c49a 100644
--- a/.github/workflows/release.yml
+++ b/.github/workflows/release.yml
@@ -10,14 +10,22 @@ jobs:
     runs-on: ubuntu-latest
 
     steps:
-      - uses: actions/checkout@v4
+      - name: Checkout repository
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           fetch-depth: 0
-      - uses: actions/setup-python@v5
+
+      - name: Set up Python
+        uses: actions/setup-python@42375524e23c412d93fb67b49958b491fce71c38 # v5.0.4
         with:
           python-version: "3.x"
-      - run: pip install packaging
-      - run: pip install pyserial
+
+      - name: Install packaging
+        run: pip install packaging
+
+      - name: Install pyserial
+        run: pip install pyserial
+
       - name: Build Release
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
diff --git a/.github/workflows/tests.yml b/.github/workflows/tests.yml
index 0db3b98782b..ddc9b64aace 100644
--- a/.github/workflows/tests.yml
+++ b/.github/workflows/tests.yml
@@ -43,7 +43,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Upload
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@ea165f8d65b6e75b540449e92b4886f43607fa02 # v4.6.2
         with:
           name: event_file
           path: ${{ github.event_path }}
@@ -62,7 +62,7 @@ jobs:
       PERFORMANCE_ENABLED: ${{ contains(github.event.pull_request.labels.*.name, 'perf_test') }}
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           sparse-checkout: .github/scripts/tests_matrix.sh
 
@@ -71,7 +71,7 @@ jobs:
         run: bash .github/scripts/tests_matrix.sh
 
       - name: Upload
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@ea165f8d65b6e75b540449e92b4886f43607fa02 # v4.6.2
         with:
           name: matrix_info
           path: info/*
diff --git a/.github/workflows/tests_build.yml b/.github/workflows/tests_build.yml
index 7a5a2959657..ac1f40644ed 100644
--- a/.github/workflows/tests_build.yml
+++ b/.github/workflows/tests_build.yml
@@ -22,14 +22,14 @@ jobs:
       - name: Check if already built
         id: cache-build-binaries
         if: github.event.pull_request.number != null
-        uses: actions/cache/restore@v4
+        uses: actions/cache/restore@5a3ec84eff668545956fd18022155c47e93e2684 # v4.2.3
         with:
           key: tests-${{ env.id }}-bin
           path: |
-            ~/.arduino/tests/**/build*.tmp/*.bin
-            ~/.arduino/tests/**/build*.tmp/*.elf
-            ~/.arduino/tests/**/build*.tmp/*.json
-            ~/.arduino/tests/**/build*.tmp/sdkconfig
+            ~/.arduino/tests/${{ inputs.chip }}/**/build*.tmp/*.bin
+            ~/.arduino/tests/${{ inputs.chip }}/**/build*.tmp/*.elf
+            ~/.arduino/tests/${{ inputs.chip }}/**/build*.tmp/*.json
+            ~/.arduino/tests/${{ inputs.chip }}/**/build*.tmp/sdkconfig
 
       - name: Evaluate if tests should be built
         id: check-build
@@ -46,10 +46,10 @@ jobs:
 
       - name: Checkout user repository
         if: ${{ steps.check-build.outputs.enabled == 'true' }}
-        uses: actions/checkout@v4
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
 
       - name: Get libs cache
-        uses: actions/cache@v4
+        uses: actions/cache@5a3ec84eff668545956fd18022155c47e93e2684 # v4.2.3
         if: ${{ steps.check-build.outputs.enabled == 'true' }}
         with:
           key: libs-${{ runner.os }}-${{ runner.arch }}-${{ hashFiles('package/package_esp32_index.template.json', 'tools/get.py') }}
@@ -68,23 +68,23 @@ jobs:
           bash .github/scripts/tests_build.sh -c -type ${{ inputs.type }} -t ${{ inputs.chip }}
 
       - name: Upload ${{ inputs.chip }} ${{ inputs.type }} binaries as cache
-        uses: actions/cache/save@v4
+        uses: actions/cache/save@5a3ec84eff668545956fd18022155c47e93e2684 # v4.2.3
         if: steps.check-build.outputs.enabled == 'true' && github.event.pull_request.number != null
         with:
           key: tests-${{ env.id }}-bin
           path: |
-            ~/.arduino/tests/**/build*.tmp/*.bin
-            ~/.arduino/tests/**/build*.tmp/*.elf
-            ~/.arduino/tests/**/build*.tmp/*.json
-            ~/.arduino/tests/**/build*.tmp/sdkconfig
+            ~/.arduino/tests/${{ inputs.chip }}/**/build*.tmp/*.bin
+            ~/.arduino/tests/${{ inputs.chip }}/**/build*.tmp/*.elf
+            ~/.arduino/tests/${{ inputs.chip }}/**/build*.tmp/*.json
+            ~/.arduino/tests/${{ inputs.chip }}/**/build*.tmp/sdkconfig
 
       - name: Upload ${{ inputs.chip }} ${{ inputs.type }} binaries as artifacts
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@ea165f8d65b6e75b540449e92b4886f43607fa02 # v4.6.2
         with:
           name: tests-bin-${{ inputs.chip }}-${{ inputs.type }}
           overwrite: true
           path: |
-            ~/.arduino/tests/**/build*.tmp/*.bin
-            ~/.arduino/tests/**/build*.tmp/*.elf
-            ~/.arduino/tests/**/build*.tmp/*.json
-            ~/.arduino/tests/**/build*.tmp/sdkconfig
+            ~/.arduino/tests/${{ inputs.chip }}/**/build*.tmp/*.bin
+            ~/.arduino/tests/${{ inputs.chip }}/**/build*.tmp/*.elf
+            ~/.arduino/tests/${{ inputs.chip }}/**/build*.tmp/*.json
+            ~/.arduino/tests/${{ inputs.chip }}/**/build*.tmp/sdkconfig
diff --git a/.github/workflows/tests_hw.yml b/.github/workflows/tests_hw.yml
index 76480ed7c0e..6f5fc67f7b9 100644
--- a/.github/workflows/tests_hw.yml
+++ b/.github/workflows/tests_hw.yml
@@ -22,17 +22,22 @@ defaults:
 jobs:
   hardware-test:
     name: Hardware ${{ inputs.chip }} ${{ inputs.type }} tests
-    runs-on: [arduino, "${{ inputs.chip }}"]
+    runs-on: ["arduino", "${{ inputs.chip }}"]
     env:
       id: ${{ github.event.pull_request.number || github.ref }}-${{ github.event.pull_request.head.sha || github.sha }}-${{ inputs.chip }}-${{ inputs.type }}
     container:
       image: python:3.10.1-bullseye
-      options: --privileged
+      options: --privileged --device-cgroup-rule="c 188:* rmw" --device-cgroup-rule="c 166:* rmw"
     steps:
+      - name: Clean workspace
+        run: |
+          rm -rf ./*
+          rm -rf ~/.arduino/tests
+
       - name: Check if already passed
         id: cache-results
         if: github.event.pull_request.number != null
-        uses: actions/cache/restore@v4
+        uses: actions/cache/restore@5a3ec84eff668545956fd18022155c47e93e2684 # v4.2.3
         with:
           key: tests-${{ env.id }}-results-hw
           path: |
@@ -54,13 +59,13 @@ jobs:
 
       - name: Checkout user repository
         if: ${{ steps.check-tests.outputs.enabled == 'true' }}
-        uses: actions/checkout@v4
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           sparse-checkout: |
             *
 
       # setup-python currently only works on ubuntu images
-      # - uses: actions/setup-python@v5
+      # - uses: actions/setup-python@42375524e23c412d93fb67b49958b491fce71c38 # v5.0.4
       #   if: ${{ steps.check-tests.outputs.enabled == 'true' }}
       #   with:
       #     cache-dependency-path: tests/requirements.txt
@@ -77,11 +82,16 @@ jobs:
 
       - name: Get binaries
         if: ${{ steps.check-tests.outputs.enabled == 'true' }}
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@95815c38cf2ff2164869cbab79da8d1f422bc89e # v4.2.1
         with:
           name: tests-bin-${{ inputs.chip }}-${{ inputs.type }}
           path: |
-            ~/.arduino/tests
+            ~/.arduino/tests/${{ inputs.chip }}
+
+      - name: List binaries
+        if: ${{ steps.check-tests.outputs.enabled == 'true' }}
+        run: |
+          ls -laR ~/.arduino/tests
 
       - name: Run Tests
         if: ${{ steps.check-tests.outputs.enabled == 'true' }}
@@ -89,7 +99,7 @@ jobs:
           bash .github/scripts/tests_run.sh -c -type ${{ inputs.type }} -t ${{ inputs.chip }} -i 0 -m 1 -e
 
       - name: Upload ${{ inputs.chip }} ${{ inputs.type }} hardware results as cache
-        uses: actions/cache/save@v4
+        uses: actions/cache/save@5a3ec84eff668545956fd18022155c47e93e2684 # v4.2.3
         if: steps.check-tests.outputs.enabled == 'true' && github.event.pull_request.number != null
         with:
           key: tests-${{ env.id }}-results-hw
@@ -98,7 +108,7 @@ jobs:
             tests/**/result_*.json
 
       - name: Upload ${{ inputs.chip }} ${{ inputs.type }} hardware results as artifacts
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@ea165f8d65b6e75b540449e92b4886f43607fa02 # v4.6.2
         if: always()
         with:
           name: tests-results-hw-${{ inputs.chip }}-${{ inputs.type }}
diff --git a/.github/workflows/tests_qemu.yml b/.github/workflows/tests_qemu.yml
index 6675909c9df..fa3f874cbbb 100644
--- a/.github/workflows/tests_qemu.yml
+++ b/.github/workflows/tests_qemu.yml
@@ -21,7 +21,7 @@ jobs:
       - name: Check if already passed
         id: get-cache-results
         if: github.event.pull_request.number != null
-        uses: actions/cache/restore@v4
+        uses: actions/cache/restore@5a3ec84eff668545956fd18022155c47e93e2684 # v4.2.3
         with:
           key: tests-${{ env.id }}-results-qemu
           path: |
@@ -43,7 +43,7 @@ jobs:
 
       - name: Checkout user repository
         if: ${{ steps.check-tests.outputs.enabled == 'true' }}
-        uses: actions/checkout@v4
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           ref: ${{ github.event.pull_request.head.sha || github.sha }}
           persist-credentials: false
@@ -60,7 +60,7 @@ jobs:
           cd .github
           curl https://codeload.github.com/${{ github.repository }}/tar.gz/master | tar -xz --strip=2 arduino-esp32-master/.github
 
-      - uses: actions/setup-python@v5
+      - uses: actions/setup-python@42375524e23c412d93fb67b49958b491fce71c38 # v5.0.4
         if: ${{ steps.check-tests.outputs.enabled == 'true' }}
         with:
           cache-dependency-path: tests/requirements.txt
@@ -74,14 +74,14 @@ jobs:
           pip install -r tests/requirements.txt --extra-index-url https://dl.espressif.com/pypi
 
       - name: Install APT dependencies
-        uses: awalsh128/cache-apt-pkgs-action@v1.4.2
+        uses: awalsh128/cache-apt-pkgs-action@5902b33ae29014e6ca012c5d8025d4346556bd40 # v1.4.3
         if: ${{ steps.check-tests.outputs.enabled == 'true' }}
         with:
           packages: libpixman-1-0 libnuma1 libglib2.0-0 libslirp0 libsdl2-2.0-0
           version: 1.0
 
       - name: Get QEMU version
-        uses: pozetroninc/github-action-get-latest-release@v0.7.0
+        uses: pozetroninc/github-action-get-latest-release@2a61c339ea7ef0a336d1daa35ef0cb1418e7676c # v0.8.0
         if: ${{ steps.check-tests.outputs.enabled == 'true' }}
         id: get-qemu-version
         with:
@@ -92,7 +92,7 @@ jobs:
 
       - name: Cache QEMU
         id: cache-qemu
-        uses: actions/cache@v4
+        uses: actions/cache@5a3ec84eff668545956fd18022155c47e93e2684 # v4.2.3
         if: ${{ steps.check-tests.outputs.enabled == 'true' }}
         with:
           path: |
@@ -113,18 +113,18 @@ jobs:
 
       - name: Get binaries
         if: ${{ steps.check-tests.outputs.enabled == 'true' }}
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@95815c38cf2ff2164869cbab79da8d1f422bc89e # v4.2.1
         with:
           name: tests-bin-${{ inputs.chip }}-${{ inputs.type }}
           path: |
-            ~/.arduino/tests
+            ~/.arduino/tests/${{ inputs.chip }}
 
       - name: Run Tests
         if: ${{ steps.check-tests.outputs.enabled == 'true' }}
         run: QEMU_PATH="${{ env.QEMU_INSTALL_PATH }}" bash .github/scripts/tests_run.sh -c -type ${{inputs.type}} -t ${{inputs.chip}} -i 0 -m 1 -Q
 
       - name: Upload ${{ inputs.chip }} ${{ inputs.type }} QEMU results as cache
-        uses: actions/cache/save@v4
+        uses: actions/cache/save@5a3ec84eff668545956fd18022155c47e93e2684 # v4.2.3
         if: steps.check-tests.outputs.enabled == 'true' && github.event.pull_request.number != null
         with:
           key: tests-${{ env.id }}-results-qemu
@@ -133,7 +133,7 @@ jobs:
             tests/**/result_*.json
 
       - name: Upload ${{ inputs.chip }} ${{ inputs.type }} QEMU results as artifacts
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@ea165f8d65b6e75b540449e92b4886f43607fa02 # v4.6.2
         if: always()
         with:
           name: tests-results-qemu-${{ inputs.chip }}-${{ inputs.type }}
diff --git a/.github/workflows/tests_results.yml b/.github/workflows/tests_results.yml
index 947de64ece5..ebba2a3aa08 100644
--- a/.github/workflows/tests_results.yml
+++ b/.github/workflows/tests_results.yml
@@ -24,12 +24,12 @@ jobs:
       pull-requests: write
       contents: write
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           ref: gh-pages
 
       - name: Download and Extract Artifacts
-        uses: dawidd6/action-download-artifact@v6
+        uses: dawidd6/action-download-artifact@07ab29fd4a977ae4d2b275087cf67563dfdf0295 # v9
         with:
           run_id: ${{ github.event.workflow_run.id }}
           path: ./artifacts
@@ -41,6 +41,7 @@ jobs:
           original_sha=$(cat ./artifacts/parent-artifacts/sha.txt)
           original_ref=$(cat ./artifacts/parent-artifacts/ref.txt)
           original_conclusion=$(cat ./artifacts/parent-artifacts/conclusion.txt)
+          original_run_id=$(cat ./artifacts/parent-artifacts/run_id.txt)
 
           # Sanitize the values to avoid security issues
 
@@ -59,20 +60,30 @@ jobs:
           # Conclusion: Allow alphabetical characters and underscores
           original_conclusion=$(echo "$original_conclusion" | tr -cd '[:alpha:]_')
 
+          # Run ID: Allow numeric characters
+          original_run_id=$(echo "$original_run_id" | tr -cd '[:digit:]')
+
           echo "original_event=$original_event" >> $GITHUB_ENV
           echo "original_action=$original_action" >> $GITHUB_ENV
           echo "original_sha=$original_sha" >> $GITHUB_ENV
           echo "original_ref=$original_ref" >> $GITHUB_ENV
           echo "original_conclusion=$original_conclusion" >> $GITHUB_ENV
+          echo "original_run_id=$original_run_id" >> $GITHUB_ENV
 
           echo "original_event = $original_event"
           echo "original_action = $original_action"
           echo "original_sha = $original_sha"
           echo "original_ref = $original_ref"
           echo "original_conclusion = $original_conclusion"
+          echo "original_run_id = $original_run_id"
+
+      - name: Print links to other runs
+        run: |
+          echo "Build, Hardware and QEMU tests: https://github.com/${{ github.repository }}/actions/runs/${{ env.original_run_id }}"
+          echo "Wokwi tests: https://github.com/${{ github.repository }}/actions/runs/${{ github.event.workflow_run.id }}"
 
       - name: Publish Unit Test Results
-        uses: EnricoMi/publish-unit-test-result-action@v2
+        uses: EnricoMi/publish-unit-test-result-action@170bf24d20d201b842d7a52403b73ed297e6645b # v2.18.0
         with:
           commit: ${{ env.original_sha }}
           event_file: ./artifacts/parent-artifacts/event_file/event.json
@@ -80,6 +91,17 @@ jobs:
           files: ./artifacts/**/*.xml
           action_fail: true
           compare_to_earlier_commit: false
+          json_file: ./unity_results.json
+          json_suite_details: true
+
+      - name: Upload JSON
+        uses: actions/upload-artifact@ea165f8d65b6e75b540449e92b4886f43607fa02 # v4.6.2
+        if: ${{ always() }}
+        with:
+          name: unity_results
+          overwrite: true
+          path: |
+            ./unity_results.json
 
       - name: Fail if tests failed
         if: ${{ env.original_conclusion == 'failure' || env.original_conclusion == 'timed_out' || github.event.workflow_run.conclusion == 'failure' || github.event.workflow_run.conclusion == 'timed_out' }}
@@ -87,7 +109,7 @@ jobs:
 
       - name: Clean up caches
         if: always()
-        uses: actions/github-script@v7
+        uses: actions/github-script@60a0d83039c74a4aee543508d2ffcb1c3799cdea # v7.0.1
         with:
           script: |
             const ref = process.env.original_ref;
@@ -117,7 +139,7 @@ jobs:
             });
 
       - name: Report conclusion
-        uses: actions/github-script@v7
+        uses: actions/github-script@60a0d83039c74a4aee543508d2ffcb1c3799cdea # v7.0.1
         if: always()
         with:
           script: |
@@ -138,15 +160,22 @@ jobs:
             })).data;
             core.info(`${name} is ${state}`);
 
-      - name: Create output folder
+      - name: Generate report
         if: ${{ !cancelled() && (env.original_event == 'schedule' || env.original_event == 'workflow_dispatch') }} # codespell:ignore cancelled
+        env:
+          REPORT_FILE: ./runtime-tests-results/RUNTIME_TESTS_REPORT.md
+          WOKWI_RUN_ID: ${{ github.event.workflow_run.id }}
+          BUILD_RUN_ID: ${{ env.original_run_id }}
+          IS_FAILING: ${{ env.original_conclusion == 'failure' || env.original_conclusion == 'timed_out' || github.event.workflow_run.conclusion == 'failure' || github.event.workflow_run.conclusion == 'timed_out' || job.status == 'failure' }}
         run: |
-          rm -rf artifacts
-          mkdir -p runtime-tests-results
+          rm -rf artifacts $REPORT_FILE
+          mv -f ./unity_results.json ./runtime-tests-results/unity_results.json
+          touch $REPORT_FILE
+          python3 ./runtime-tests-results/table_generator.py ./runtime-tests-results/unity_results.json >> $REPORT_FILE
 
       - name: Generate badge
         if: ${{ !cancelled() && (env.original_event == 'schedule' || env.original_event == 'workflow_dispatch') }} # codespell:ignore cancelled
-        uses: jaywcjlove/generated-badges@v1.0.13
+        uses: jaywcjlove/generated-badges@0e078ae4d4bab3777ea4f137de496ab44688f5ad # v1.0.13
         with:
           label: Runtime Tests
           status: ${{ job.status == 'success' && 'passing' || 'failing' }}
@@ -161,6 +190,6 @@ jobs:
           git config user.email "41898282+github-actions[bot]@users.noreply.github.com"
           if [[ `git status --porcelain` ]]; then
             git add --all
-            git commit -m "Updated runtime tests badge"
+            git commit -m "Updated runtime tests report"
             git push origin HEAD:gh-pages
           fi
diff --git a/.github/workflows/tests_wokwi.yml b/.github/workflows/tests_wokwi.yml
index f5eb2efcad2..03dd64fc0fb 100644
--- a/.github/workflows/tests_wokwi.yml
+++ b/.github/workflows/tests_wokwi.yml
@@ -27,7 +27,7 @@ jobs:
       types: ${{ steps.set-ref.outputs.types }}
     steps:
       - name: Report pending
-        uses: actions/github-script@v7
+        uses: actions/github-script@60a0d83039c74a4aee543508d2ffcb1c3799cdea # v7.0.1
         with:
           script: |
             const owner = '${{ github.repository_owner }}';
@@ -47,7 +47,7 @@ jobs:
             core.info(`${name} is ${state}`);
 
       - name: Download and extract event file
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@95815c38cf2ff2164869cbab79da8d1f422bc89e # v4.2.1
         with:
           github-token: ${{ secrets.GITHUB_TOKEN }}
           run-id: ${{ github.event.workflow_run.id }}
@@ -55,7 +55,7 @@ jobs:
           path: artifacts/event_file
 
       - name: Download and extract matrix info
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@95815c38cf2ff2164869cbab79da8d1f422bc89e # v4.2.1
         with:
           github-token: ${{ secrets.GITHUB_TOKEN }}
           run-id: ${{ github.event.workflow_run.id }}
@@ -109,6 +109,10 @@ jobs:
           printf "\nAction = "
           cat artifacts/action.txt
 
+          printf "${{ github.event.workflow_run.id }}" >> artifacts/run_id.txt
+          printf "\nRun ID = "
+          cat artifacts/run_id.txt
+
           if [ -z "$ref" ] || [ "$ref" == "null" ]; then
             echo "Failed to get PR number or ref"
             exit 1
@@ -126,7 +130,7 @@ jobs:
           echo "ref=$ref" >> $GITHUB_OUTPUT
 
       - name: Download and extract parent hardware results
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@95815c38cf2ff2164869cbab79da8d1f422bc89e # v4.2.1
         continue-on-error: true
         with:
           github-token: ${{ secrets.GITHUB_TOKEN }}
@@ -136,7 +140,7 @@ jobs:
           path: artifacts/results/hw
 
       - name: Download and extract parent QEMU results
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@95815c38cf2ff2164869cbab79da8d1f422bc89e # v4.2.1
         continue-on-error: true
         with:
           github-token: ${{ secrets.GITHUB_TOKEN }}
@@ -146,14 +150,14 @@ jobs:
           path: artifacts/results/qemu
 
       - name: Upload parent artifacts
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@ea165f8d65b6e75b540449e92b4886f43607fa02 # v4.6.2
         with:
           name: parent-artifacts
           path: artifacts
           if-no-files-found: error
 
       - name: Report conclusion
-        uses: actions/github-script@v7
+        uses: actions/github-script@60a0d83039c74a4aee543508d2ffcb1c3799cdea # v7.0.1
         if: always()
         with:
           script: |
@@ -193,7 +197,7 @@ jobs:
         chip: ${{ fromJson(needs.get-artifacts.outputs.targets) }}
     steps:
       - name: Report pending
-        uses: actions/github-script@v7
+        uses: actions/github-script@60a0d83039c74a4aee543508d2ffcb1c3799cdea # v7.0.1
         with:
           script: |
             const owner = '${{ github.repository_owner }}';
@@ -215,7 +219,7 @@ jobs:
       - name: Check if already passed
         id: get-cache-results
         if: needs.get-artifacts.outputs.pr_num
-        uses: actions/cache/restore@v4
+        uses: actions/cache/restore@5a3ec84eff668545956fd18022155c47e93e2684 # v4.2.3
         with:
           key: tests-${{ env.id }}-results-wokwi
           path: |
@@ -239,11 +243,11 @@ jobs:
       # DO NOT CHECKOUT THE USER'S REPOSITORY IN THIS WORKFLOW. IT HAS HIGH SECURITY RISKS.
       - name: Checkout repository
         if: ${{ steps.check-tests.outputs.enabled == 'true' }}
-        uses: actions/checkout@v4
+        uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           ref: ${{ needs.get-artifacts.outputs.base || github.ref }}
 
-      - uses: actions/setup-python@v5
+      - uses: actions/setup-python@42375524e23c412d93fb67b49958b491fce71c38 # v5.0.4
         if: ${{ steps.check-tests.outputs.enabled == 'true' }}
         with:
           cache-dependency-path: tests/requirements.txt
@@ -262,17 +266,17 @@ jobs:
 
       - name: Wokwi CI Server
         if: ${{ steps.check-tests.outputs.enabled == 'true' }}
-        uses: wokwi/wokwi-ci-server-action@v1
+        uses: wokwi/wokwi-ci-server-action@a6fabb5a49e080158c7a1d121ea5b789536a82c3 # v1
 
       - name: Get binaries
         if: ${{ steps.check-tests.outputs.enabled == 'true' }}
-        uses: actions/download-artifact@v4
+        uses: actions/download-artifact@95815c38cf2ff2164869cbab79da8d1f422bc89e # v4.2.1
         with:
           github-token: ${{ secrets.GITHUB_TOKEN }}
           run-id: ${{ github.event.workflow_run.id }}
           name: tests-bin-${{ matrix.chip }}-${{ matrix.type }}
           path: |
-            ~/.arduino/tests
+            ~/.arduino/tests/${{ matrix.chip }}
 
       - name: Run Tests
         if: ${{ steps.check-tests.outputs.enabled == 'true' }}
@@ -282,7 +286,7 @@ jobs:
           bash .github/scripts/tests_run.sh -c -type ${{ matrix.type }} -t ${{ matrix.chip }} -i 0 -m 1 -W ${{ env.WOKWI_TIMEOUT }}
 
       - name: Upload ${{ matrix.chip }} ${{ matrix.type }} Wokwi results as cache
-        uses: actions/cache/save@v4
+        uses: actions/cache/save@5a3ec84eff668545956fd18022155c47e93e2684 # v4.2.3
         if: steps.check-tests.outputs.enabled == 'true' && needs.get-artifacts.outputs.pr_num
         with:
           key: tests-${{ env.id }}-results-wokwi
@@ -291,7 +295,7 @@ jobs:
             tests/**/result_*.json
 
       - name: Upload ${{ matrix.chip }} ${{ matrix.type }} Wokwi results as artifacts
-        uses: actions/upload-artifact@v4
+        uses: actions/upload-artifact@ea165f8d65b6e75b540449e92b4886f43607fa02 # v4.6.2
         if: always()
         with:
           name: tests-results-wokwi-${{ matrix.chip }}-${{ matrix.type }}
@@ -301,7 +305,7 @@ jobs:
             tests/**/result_*.json
 
       - name: Report conclusion
-        uses: actions/github-script@v7
+        uses: actions/github-script@60a0d83039c74a4aee543508d2ffcb1c3799cdea # v7.0.1
         if: always()
         with:
           script: |
diff --git a/.github/workflows/upload-idf-component.yml b/.github/workflows/upload-idf-component.yml
index 5ce4562c01a..687e721fbc2 100644
--- a/.github/workflows/upload-idf-component.yml
+++ b/.github/workflows/upload-idf-component.yml
@@ -45,13 +45,13 @@ jobs:
           echo "Tag: $tag"
           echo "RELEASE_TAG=$tag" >> $GITHUB_ENV
 
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@11bd71901bbe5b1630ceea73d27597364c9af683 # v4.2.2
         with:
           ref: ${{ inputs.git_ref || env.RELEASE_TAG }}
           submodules: "recursive"
 
       - name: Upload components to the component registry
-        uses: espressif/upload-components-ci-action@v1
+        uses: espressif/upload-components-ci-action@b78a19fa5424714997596d3ecffa634aef8ae20b # v1.0.5
         with:
           name: arduino-esp32
           version: ${{ env.RELEASE_TAG }}
diff --git a/CMakeLists.txt b/CMakeLists.txt
index 5ee4ce664ec..7539601d9e5 100644
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -6,7 +6,7 @@
 #   idf.py build
 
 set(min_supported_idf_version "5.3.0")
-set(max_supported_idf_version "5.3.99")
+set(max_supported_idf_version "5.4.99")
 set(idf_version "${IDF_VERSION_MAJOR}.${IDF_VERSION_MINOR}.${IDF_VERSION_PATCH}")
 
 if ("${idf_version}" AND NOT "$ENV{ARDUINO_SKIP_IDF_VERSION_CHECK}")
@@ -33,6 +33,7 @@ set(CORE_SRCS
   cores/esp32/esp32-hal-dac.c
   cores/esp32/esp32-hal-gpio.c
   cores/esp32/esp32-hal-i2c.c
+  cores/esp32/esp32-hal-i2c-ng.c
   cores/esp32/esp32-hal-i2c-slave.c
   cores/esp32/esp32-hal-ledc.c
   cores/esp32/esp32-hal-matrix.c
@@ -294,6 +295,11 @@ set(ARDUINO_LIBRARY_Zigbee_SRCS
   libraries/Zigbee/src/ep/ZigbeeDoorWindowHandle.cpp
   libraries/Zigbee/src/ep/ZigbeeWindowCovering.cpp
   libraries/Zigbee/src/ep/ZigbeeVibrationSensor.cpp
+  libraries/Zigbee/src/ep/ZigbeeAnalog.cpp
+  libraries/Zigbee/src/ep/ZigbeeRangeExtender.cpp
+  libraries/Zigbee/src/ep/ZigbeeGateway.cpp
+  libraries/Zigbee/src/ep/ZigbeeWindSpeedSensor.cpp
+  libraries/Zigbee/src/ep/ZigbeeIlluminanceSensor.cpp
   )
 
 set(ARDUINO_LIBRARY_BLE_SRCS
diff --git a/README.md b/README.md
index 0a9a6d0440c..f40315c03cc 100644
--- a/README.md
+++ b/README.md
@@ -1,9 +1,9 @@
-# Arduino core for the ESP32, ESP32-P4, ESP32-S2, ESP32-S3, ESP32-C3, ESP32-C6 and ESP32-H2
+# Arduino core for the ESP32, ESP32-C3, ESP32-C6, ESP32-H2, ESP32-P4, ESP32-S2 and ESP32-S3.
 
 [![Build Status](https://img.shields.io/github/actions/workflow/status/espressif/arduino-esp32/push.yml?branch=master&event=push&label=Compilation%20Tests)](https://github.com/espressif/arduino-esp32/actions/workflows/push.yml?query=branch%3Amaster+event%3Apush)
 [![Verbose Build Status](https://img.shields.io/github/actions/workflow/status/espressif/arduino-esp32/push.yml?branch=master&event=schedule&label=Compilation%20Tests%20(Verbose))](https://github.com/espressif/arduino-esp32/actions/workflows/push.yml?query=branch%3Amaster+event%3Aschedule)
 [![External Libraries Test](https://img.shields.io/github/actions/workflow/status/espressif/arduino-esp32/lib.yml?branch=master&event=schedule&label=External%20Libraries%20Test)](https://github.com/espressif/arduino-esp32/blob/gh-pages/LIBRARIES_TEST.md)
-[![Runtime Tests](https://github.com/espressif/arduino-esp32/blob/gh-pages/runtime-tests-results/badge.svg)](https://github.com/espressif/arduino-esp32/actions/workflows/tests_results.yml)
+[![Runtime Tests](https://github.com/espressif/arduino-esp32/blob/gh-pages/runtime-tests-results/badge.svg)](https://github.com/espressif/arduino-esp32/blob/gh-pages/runtime-tests-results/RUNTIME_TESTS_REPORT.md)
 
 ### Need help or have a question? Join the chat at [Discord](https://discord.gg/8xY6e9crwv) or [open a new Discussion](https://github.com/espressif/arduino-esp32/discussions)
 
@@ -67,16 +67,17 @@ Here are the ESP32 series supported by the Arduino-ESP32 project:
 | **SoC**  | **Stable** | **Development** |                                           **Datasheet**                                           |
 |----------|:----------:|:---------------:|:-------------------------------------------------------------------------------------------------:|
 | ESP32    |     Yes    |       Yes       |    [ESP32](https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf)    |
-| ESP32-S2 |     Yes    |       Yes       | [ESP32-S2](https://www.espressif.com/sites/default/files/documentation/esp32-s2_datasheet_en.pdf) |
 | ESP32-C3 |     Yes    |       Yes       | [ESP32-C3](https://www.espressif.com/sites/default/files/documentation/esp32-c3_datasheet_en.pdf) |
-| ESP32-S3 |     Yes    |       Yes       | [ESP32-S3](https://www.espressif.com/sites/default/files/documentation/esp32-s3_datasheet_en.pdf) |
 | ESP32-C6 |     Yes    |       Yes       | [ESP32-C6](https://www.espressif.com/sites/default/files/documentation/esp32-c6_datasheet_en.pdf) |
 | ESP32-H2 |     Yes    |       Yes       | [ESP32-H2](https://www.espressif.com/sites/default/files/documentation/esp32-h2_datasheet_en.pdf) |
 | ESP32-P4 |     Yes    |       Yes       | [ESP32-P4](https://www.espressif.com/sites/default/files/documentation/esp32-p4_datasheet_en.pdf) |
+| ESP32-S2 |     Yes    |       Yes       | [ESP32-S2](https://www.espressif.com/sites/default/files/documentation/esp32-s2_datasheet_en.pdf) |
+| ESP32-S3 |     Yes    |       Yes       | [ESP32-S3](https://www.espressif.com/sites/default/files/documentation/esp32-s3_datasheet_en.pdf) |
 
 > [!NOTE]
-> ESP32-C2 is also supported by Arduino-ESP32 but requires rebuilding the static libraries. This is not trivial and requires a good understanding of the ESP-IDF
-> build system. For more information, see the [Lib Builder documentation](https://docs.espressif.com/projects/arduino-esp32/en/latest/lib_builder.html).
+> ESP32-C2 is also supported by Arduino-ESP32 but requires using Arduino as an ESP-IDF component or rebuilding the static libraries.
+> For more information, see the [Arduino as an ESP-IDF component documentation](https://docs.espressif.com/projects/arduino-esp32/en/latest/esp-idf_component.html) or the
+> [Lib Builder documentation](https://docs.espressif.com/projects/arduino-esp32/en/latest/lib_builder.html), respectively.
 
 For more details visit the [supported chips](https://docs.espressif.com/projects/arduino-esp32/en/latest/getting_started.html#supported-soc-s) documentation page.
 
diff --git a/boards.txt b/boards.txt
index 86f821476cf..f0df27762c2 100644
--- a/boards.txt
+++ b/boards.txt
@@ -536,22 +536,16 @@ esp32h2.menu.ZigbeeMode.default.build.zigbee_mode=
 esp32h2.menu.ZigbeeMode.default.build.zigbee_libs=
 esp32h2.menu.ZigbeeMode.ed=Zigbee ED (end device)
 esp32h2.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
-esp32h2.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
+esp32h2.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api.ed -lzboss_stack.ed -lzboss_port.native
 esp32h2.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 esp32h2.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-esp32h2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
-esp32h2.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
-esp32h2.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
-esp32h2.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
+esp32h2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.native
 esp32h2.menu.ZigbeeMode.ed_debug=Zigbee ED (end device) - Debug
 esp32h2.menu.ZigbeeMode.ed_debug.build.zigbee_mode=-DZIGBEE_MODE_ED
-esp32h2.menu.ZigbeeMode.ed_debug.build.zigbee_libs=-lesp_zb_api_ed.debug -lesp_zb_cli_command -lzboss_stack.ed.debug -lzboss_port.debug
+esp32h2.menu.ZigbeeMode.ed_debug.build.zigbee_libs=-lesp_zb_api.ed.debug -lzboss_stack.ed.debug -lzboss_port.native.debug
 esp32h2.menu.ZigbeeMode.zczr_debug=Zigbee ZCZR (coordinator/router) - Debug
 esp32h2.menu.ZigbeeMode.zczr_debug.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-esp32h2.menu.ZigbeeMode.zczr_debug.build.zigbee_libs=-lesp_zb_api_zczr.debug -lesp_zb_cli_command -lzboss_stack.zczr.debug -lzboss_port.debug
-esp32h2.menu.ZigbeeMode.rcp_debug=Zigbee RCP (radio co-processor) - Debug
-esp32h2.menu.ZigbeeMode.rcp_debug.build.zigbee_mode=-DZIGBEE_MODE_RCP
-esp32h2.menu.ZigbeeMode.rcp_debug.build.zigbee_libs=-lesp_zb_api_rcp.debug -lesp_zb_cli_command -lzboss_stack.rcp.debug -lzboss_port.debug
+esp32h2.menu.ZigbeeMode.zczr_debug.build.zigbee_libs=-lesp_zb_api.zczr.debug -lzboss_stack.zczr.debug -lzboss_port.native.debug
 
 ##############################################################
 
@@ -748,22 +742,16 @@ esp32c6.menu.ZigbeeMode.default.build.zigbee_mode=
 esp32c6.menu.ZigbeeMode.default.build.zigbee_libs=
 esp32c6.menu.ZigbeeMode.ed=Zigbee ED (end device)
 esp32c6.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
-esp32c6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
+esp32c6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api.ed -lzboss_stack.ed -lzboss_port.native
 esp32c6.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 esp32c6.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-esp32c6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
-esp32c6.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
-esp32c6.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
-esp32c6.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
+esp32c6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.native
 esp32c6.menu.ZigbeeMode.ed_debug=Zigbee ED (end device) - Debug
 esp32c6.menu.ZigbeeMode.ed_debug.build.zigbee_mode=-DZIGBEE_MODE_ED
-esp32c6.menu.ZigbeeMode.ed_debug.build.zigbee_libs=-lesp_zb_api_ed.debug -lesp_zb_cli_command -lzboss_stack.ed.debug -lzboss_port.debug
+esp32c6.menu.ZigbeeMode.ed_debug.build.zigbee_libs=-lesp_zb_api.ed.debug -lzboss_stack.ed.debug -lzboss_port.native.debug
 esp32c6.menu.ZigbeeMode.zczr_debug=Zigbee ZCZR (coordinator/router) - Debug
 esp32c6.menu.ZigbeeMode.zczr_debug.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-esp32c6.menu.ZigbeeMode.zczr_debug.build.zigbee_libs=-lesp_zb_api_zczr.debug -lesp_zb_cli_command -lzboss_stack.zczr.debug -lzboss_port.debug
-esp32c6.menu.ZigbeeMode.rcp_debug=Zigbee RCP (radio co-processor) - Debug
-esp32c6.menu.ZigbeeMode.rcp_debug.build.zigbee_mode=-DZIGBEE_MODE_RCP
-esp32c6.menu.ZigbeeMode.rcp_debug.build.zigbee_libs=-lesp_zb_api_rcp.debug -lesp_zb_cli_command -lzboss_stack.rcp.debug -lzboss_port.debug
+esp32c6.menu.ZigbeeMode.zczr_debug.build.zigbee_libs=-lesp_zb_api.zczr.debug -lzboss_stack.zczr.debug -lzboss_port.native.debug
 
 ##############################################################
 
@@ -952,6 +940,9 @@ esp32s3.menu.PartitionScheme.app5M_fat24M_32MB.upload.maximum_size=4718592
 esp32s3.menu.PartitionScheme.app5M_little24M_32MB=32M Flash (4.8MB APP/22MB LittleFS)
 esp32s3.menu.PartitionScheme.app5M_little24M_32MB.build.partitions=large_littlefs_32MB
 esp32s3.menu.PartitionScheme.app5M_little24M_32MB.upload.maximum_size=4718592
+esp32s3.menu.PartitionScheme.app13M_data7M_32MB=32M Flash (13MB APP/6.75MB SPIFFS)
+esp32s3.menu.PartitionScheme.app13M_data7M_32MB.build.partitions=default_32MB
+esp32s3.menu.PartitionScheme.app13M_data7M_32MB.upload.maximum_size=13107200
 esp32s3.menu.PartitionScheme.esp_sr_16=ESP SR 16M (3MB APP/7MB SPIFFS/2.9MB MODEL)
 esp32s3.menu.PartitionScheme.esp_sr_16.upload.maximum_size=3145728
 esp32s3.menu.PartitionScheme.esp_sr_16.upload.extra_flags=0xD10000 {build.path}/srmodels.bin
@@ -959,6 +950,9 @@ esp32s3.menu.PartitionScheme.esp_sr_16.build.partitions=esp_sr_16
 esp32s3.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
 esp32s3.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
 esp32s3.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
+esp32s3.menu.PartitionScheme.zigbee_zczr_8MB=Zigbee ZCZR 8MB with spiffs
+esp32s3.menu.PartitionScheme.zigbee_zczr_8MB.build.partitions=zigbee_zczr_8MB
+esp32s3.menu.PartitionScheme.zigbee_zczr_8MB.upload.maximum_size=3407872
 esp32s3.menu.PartitionScheme.custom=Custom
 esp32s3.menu.PartitionScheme.custom.build.partitions=
 esp32s3.menu.PartitionScheme.custom.upload.maximum_size=16777216
@@ -1014,7 +1008,7 @@ esp32s3.menu.ZigbeeMode.default.build.zigbee_mode=
 esp32s3.menu.ZigbeeMode.default.build.zigbee_libs=
 esp32s3.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 esp32s3.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-esp32s3.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+esp32s3.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 
@@ -1120,6 +1114,9 @@ esp32c3.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
 esp32c3.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
 esp32c3.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
 esp32c3.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
+esp32c3.menu.PartitionScheme.zigbee_zczr_8MB=Zigbee ZCZR 8MB with spiffs
+esp32c3.menu.PartitionScheme.zigbee_zczr_8MB.build.partitions=zigbee_zczr_8MB
+esp32c3.menu.PartitionScheme.zigbee_zczr_8MB.upload.maximum_size=3407872
 esp32c3.menu.PartitionScheme.custom=Custom
 esp32c3.menu.PartitionScheme.custom.build.partitions=
 esp32c3.menu.PartitionScheme.custom.upload.maximum_size=16777216
@@ -1194,7 +1191,7 @@ esp32c3.menu.ZigbeeMode.default.build.zigbee_mode=
 esp32c3.menu.ZigbeeMode.default.build.zigbee_libs=
 esp32c3.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 esp32c3.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-esp32c3.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+esp32c3.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 
@@ -1325,6 +1322,9 @@ esp32s2.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
 esp32s2.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
 esp32s2.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
 esp32s2.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
+esp32s2.menu.PartitionScheme.zigbee_zczr_8MB=Zigbee ZCZR 8MB with spiffs
+esp32s2.menu.PartitionScheme.zigbee_zczr_8MB.build.partitions=zigbee_zczr_8MB
+esp32s2.menu.PartitionScheme.zigbee_zczr_8MB.upload.maximum_size=3407872
 esp32s2.menu.PartitionScheme.custom=Custom
 esp32s2.menu.PartitionScheme.custom.build.partitions=
 esp32s2.menu.PartitionScheme.custom.upload.maximum_size=16777216
@@ -1401,7 +1401,7 @@ esp32s2.menu.ZigbeeMode.default.build.zigbee_mode=
 esp32s2.menu.ZigbeeMode.default.build.zigbee_libs=
 esp32s2.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 esp32s2.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-esp32s2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+esp32s2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 
@@ -1505,6 +1505,9 @@ esp32.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
 esp32.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
 esp32.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
 esp32.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
+esp32.menu.PartitionScheme.zigbee_zczr_8MB=Zigbee ZCZR 8MB with spiffs
+esp32.menu.PartitionScheme.zigbee_zczr_8MB.build.partitions=zigbee_zczr_8MB
+esp32.menu.PartitionScheme.zigbee_zczr_8MB.upload.maximum_size=3407872
 esp32.menu.PartitionScheme.custom=Custom
 esp32.menu.PartitionScheme.custom.build.partitions=
 esp32.menu.PartitionScheme.custom.upload.maximum_size=16777216
@@ -1595,7 +1598,7 @@ esp32.menu.ZigbeeMode.default.build.zigbee_mode=
 esp32.menu.ZigbeeMode.default.build.zigbee_libs=
 esp32.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 esp32.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-esp32.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+esp32.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 
@@ -2148,6 +2151,9 @@ esp32s3-octal.menu.PartitionScheme.app5M_fat24M_32MB.upload.maximum_size=4718592
 esp32s3-octal.menu.PartitionScheme.app5M_little24M_32MB=32M Flash (4.8MB APP/22MB LittleFS)
 esp32s3-octal.menu.PartitionScheme.app5M_little24M_32MB.build.partitions=large_littlefs_32MB
 esp32s3-octal.menu.PartitionScheme.app5M_little24M_32MB.upload.maximum_size=4718592
+esp32s3-octal.menu.PartitionScheme.app13M_data7M_32MB=32M Flash (13MB APP/6.75MB SPIFFS)
+esp32s3-octal.menu.PartitionScheme.app13M_data7M_32MB.build.partitions=default_32MB
+esp32s3-octal.menu.PartitionScheme.app13M_data7M_32MB.upload.maximum_size=13107200
 
 esp32s3-octal.menu.CPUFreq.240=240MHz (WiFi)
 esp32s3-octal.menu.CPUFreq.240.build.f_cpu=240000000L
@@ -4965,13 +4971,10 @@ um_tinyc6.menu.ZigbeeMode.default.build.zigbee_mode=
 um_tinyc6.menu.ZigbeeMode.default.build.zigbee_libs=
 um_tinyc6.menu.ZigbeeMode.ed=Zigbee ED (end device)
 um_tinyc6.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
-um_tinyc6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
+um_tinyc6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api.ed -lzboss_stack.ed -lzboss_port.native
 um_tinyc6.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 um_tinyc6.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-um_tinyc6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
-um_tinyc6.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
-um_tinyc6.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
-um_tinyc6.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
+um_tinyc6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.native
 
 ##############################################################
 
@@ -6067,10 +6070,12 @@ twatchs3.menu.EraseFlash.none.upload.erase_cmd=
 twatchs3.menu.EraseFlash.all=Enabled
 twatchs3.menu.EraseFlash.all.upload.erase_cmd=-e
 
-twatchs3.menu.Revision.Radio_SX1280=Radio-SX1280
-twatchs3.menu.Revision.Radio_SX1280.build.board=LILYGO_LORA_SX1280
 twatchs3.menu.Revision.Radio_SX1262=Radio-SX1262
 twatchs3.menu.Revision.Radio_SX1262.build.board=LILYGO_LORA_SX1262
+twatchs3.menu.Revision.Radio_SX1280=Radio-SX1280
+twatchs3.menu.Revision.Radio_SX1280.build.board=LILYGO_LORA_SX1280
+twatchs3.menu.Revision.Radio_CC1101=Radio-CC1101
+twatchs3.menu.Revision.Radio_CC1101.build.board=LILYGO_LORA_CC1101
 
 ##############################################################
 
@@ -6163,12 +6168,12 @@ twatch_ultra.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
 twatch_ultra.menu.UploadMode.cdc.upload.use_1200bps_touch=true
 twatch_ultra.menu.UploadMode.cdc.upload.wait_for_upload_port=true
 
-twatch_ultra.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
-twatch_ultra.menu.PartitionScheme.fatflash.build.partitions=ffat
-twatch_ultra.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
 twatch_ultra.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
 twatch_ultra.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
 twatch_ultra.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
+twatch_ultra.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
+twatch_ultra.menu.PartitionScheme.fatflash.build.partitions=ffat
+twatch_ultra.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
 twatch_ultra.menu.PartitionScheme.rainmaker=RainMaker
 twatch_ultra.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
 twatch_ultra.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
@@ -6230,7 +6235,170 @@ twatch_ultra.menu.Revision.Radio_SX1280=Radio-SX1280
 twatch_ultra.menu.Revision.Radio_SX1280.build.board=LILYGO_LORA_SX1280
 twatch_ultra.menu.Revision.Radio_SX1262=Radio-SX1262
 twatch_ultra.menu.Revision.Radio_SX1262.build.board=LILYGO_LORA_SX1262
+twatch_ultra.menu.Revision.Radio_CC1101=Radio-CC1101
+twatch_ultra.menu.Revision.Radio_CC1101.build.board=LILYGO_LORA_CC1101
+
+
+##############################################################
+
+tlora_pager.name=LilyGo-T-LoRa-Pager
+
+tlora_pager.bootloader.tool=esptool_py
+tlora_pager.bootloader.tool.default=esptool_py
+
+tlora_pager.upload.tool=esptool_py
+tlora_pager.upload.tool.default=esptool_py
+tlora_pager.upload.tool.network=esp_ota
+
+tlora_pager.upload.maximum_size=1310720
+tlora_pager.upload.maximum_data_size=327680
+tlora_pager.upload.flags=
+tlora_pager.upload.extra_flags=
+tlora_pager.upload.use_1200bps_touch=false
+tlora_pager.upload.wait_for_upload_port=false
+
+tlora_pager.serial.disableDTR=false
+tlora_pager.serial.disableRTS=false
+
+tlora_pager.build.tarch=xtensa
+tlora_pager.build.bootloader_addr=0x0
+tlora_pager.build.target=esp32s3
+tlora_pager.build.mcu=esp32s3
+tlora_pager.build.core=esp32
+tlora_pager.build.variant=lilygo_tlora_pager
+tlora_pager.build.board=T_LORA_PAGER
+
+tlora_pager.build.usb_mode=1
+tlora_pager.build.cdc_on_boot=1
+tlora_pager.build.msc_on_boot=0
+tlora_pager.build.dfu_on_boot=0
+tlora_pager.build.f_cpu=240000000L
+tlora_pager.build.flash_size=16MB
+tlora_pager.build.flash_freq=80m
+tlora_pager.build.flash_mode=dio
+tlora_pager.build.boot=qio
+tlora_pager.build.boot_freq=80m
+tlora_pager.build.partitions=app3M_fat9M_16MB
+tlora_pager.build.defines=-DBOARD_HAS_PSRAM -DARDUINO_T_LORA_PAGER
+tlora_pager.build.loop_core=
+tlora_pager.build.event_core=
+tlora_pager.build.psram_type=qspi
+tlora_pager.build.memory_type={build.boot}_{build.psram_type}
 
+## IDE 2.0 Seems to not update the value
+tlora_pager.menu.JTAGAdapter.default=Disabled
+tlora_pager.menu.JTAGAdapter.default.build.copy_jtag_files=0
+tlora_pager.menu.JTAGAdapter.builtin=Integrated USB JTAG
+tlora_pager.menu.JTAGAdapter.builtin.build.openocdscript=esp32s3-builtin.cfg
+tlora_pager.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
+
+tlora_pager.menu.LoopCore.1=Core 1
+tlora_pager.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
+tlora_pager.menu.LoopCore.0=Core 0
+tlora_pager.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
+
+tlora_pager.menu.EventsCore.1=Core 1
+tlora_pager.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
+tlora_pager.menu.EventsCore.0=Core 0
+tlora_pager.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
+
+tlora_pager.menu.USBMode.hwcdc=Hardware CDC and JTAG
+tlora_pager.menu.USBMode.hwcdc.build.usb_mode=1
+tlora_pager.menu.USBMode.default=USB-OTG (TinyUSB)
+tlora_pager.menu.USBMode.default.build.usb_mode=0
+
+tlora_pager.menu.CDCOnBoot.default=Enabled
+tlora_pager.menu.CDCOnBoot.default.build.cdc_on_boot=1
+tlora_pager.menu.CDCOnBoot.cdc=Disabled
+tlora_pager.menu.CDCOnBoot.cdc.build.cdc_on_boot=0
+
+tlora_pager.menu.MSCOnBoot.default=Disabled
+tlora_pager.menu.MSCOnBoot.default.build.msc_on_boot=0
+tlora_pager.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
+tlora_pager.menu.MSCOnBoot.msc.build.msc_on_boot=1
+
+tlora_pager.menu.DFUOnBoot.default=Disabled
+tlora_pager.menu.DFUOnBoot.default.build.dfu_on_boot=0
+tlora_pager.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
+tlora_pager.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
+
+tlora_pager.menu.UploadMode.default=UART0 / Hardware CDC
+tlora_pager.menu.UploadMode.default.upload.use_1200bps_touch=false
+tlora_pager.menu.UploadMode.default.upload.wait_for_upload_port=false
+tlora_pager.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
+tlora_pager.menu.UploadMode.cdc.upload.use_1200bps_touch=true
+tlora_pager.menu.UploadMode.cdc.upload.wait_for_upload_port=true
+
+tlora_pager.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
+tlora_pager.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
+tlora_pager.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
+tlora_pager.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
+tlora_pager.menu.PartitionScheme.fatflash.build.partitions=ffat
+tlora_pager.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
+tlora_pager.menu.PartitionScheme.rainmaker=RainMaker
+tlora_pager.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
+tlora_pager.menu.PartitionScheme.rainmaker.upload.maximum_size=3145728
+tlora_pager.menu.PartitionScheme.esp_sr_16=ESP SR 16M (3MB APP/7MB SPIFFS/2.9MB MODEL)
+tlora_pager.menu.PartitionScheme.esp_sr_16.upload.maximum_size=3145728
+tlora_pager.menu.PartitionScheme.esp_sr_16.upload.extra_flags=0xD10000 {build.path}/srmodels.bin
+tlora_pager.menu.PartitionScheme.esp_sr_16.build.partitions=esp_sr_16
+tlora_pager.menu.PartitionScheme.custom=Custom
+tlora_pager.menu.PartitionScheme.custom.build.partitions=
+tlora_pager.menu.PartitionScheme.custom.upload.maximum_size=16777216
+
+tlora_pager.menu.CPUFreq.240=240MHz (WiFi)
+tlora_pager.menu.CPUFreq.240.build.f_cpu=240000000L
+tlora_pager.menu.CPUFreq.160=160MHz (WiFi)
+tlora_pager.menu.CPUFreq.160.build.f_cpu=160000000L
+tlora_pager.menu.CPUFreq.80=80MHz (WiFi)
+tlora_pager.menu.CPUFreq.80.build.f_cpu=80000000L
+tlora_pager.menu.CPUFreq.40=40MHz
+tlora_pager.menu.CPUFreq.40.build.f_cpu=40000000L
+tlora_pager.menu.CPUFreq.20=20MHz
+tlora_pager.menu.CPUFreq.20.build.f_cpu=20000000L
+tlora_pager.menu.CPUFreq.10=10MHz
+tlora_pager.menu.CPUFreq.10.build.f_cpu=10000000L
+
+tlora_pager.menu.UploadSpeed.921600=921600
+tlora_pager.menu.UploadSpeed.921600.upload.speed=921600
+tlora_pager.menu.UploadSpeed.115200=115200
+tlora_pager.menu.UploadSpeed.115200.upload.speed=115200
+tlora_pager.menu.UploadSpeed.256000.windows=256000
+tlora_pager.menu.UploadSpeed.256000.upload.speed=256000
+tlora_pager.menu.UploadSpeed.230400.windows.upload.speed=256000
+tlora_pager.menu.UploadSpeed.230400=230400
+tlora_pager.menu.UploadSpeed.230400.upload.speed=230400
+tlora_pager.menu.UploadSpeed.460800.linux=460800
+tlora_pager.menu.UploadSpeed.460800.macosx=460800
+tlora_pager.menu.UploadSpeed.460800.upload.speed=460800
+tlora_pager.menu.UploadSpeed.512000.windows=512000
+tlora_pager.menu.UploadSpeed.512000.upload.speed=512000
+
+tlora_pager.menu.DebugLevel.none=None
+tlora_pager.menu.DebugLevel.none.build.code_debug=0
+tlora_pager.menu.DebugLevel.error=Error
+tlora_pager.menu.DebugLevel.error.build.code_debug=1
+tlora_pager.menu.DebugLevel.warn=Warn
+tlora_pager.menu.DebugLevel.warn.build.code_debug=2
+tlora_pager.menu.DebugLevel.info=Info
+tlora_pager.menu.DebugLevel.info.build.code_debug=3
+tlora_pager.menu.DebugLevel.debug=Debug
+tlora_pager.menu.DebugLevel.debug.build.code_debug=4
+tlora_pager.menu.DebugLevel.verbose=Verbose
+tlora_pager.menu.DebugLevel.verbose.build.code_debug=5
+
+tlora_pager.menu.EraseFlash.none=Disabled
+tlora_pager.menu.EraseFlash.none.upload.erase_cmd=
+tlora_pager.menu.EraseFlash.all=Enabled
+tlora_pager.menu.EraseFlash.all.upload.erase_cmd=-e
+
+
+tlora_pager.menu.Revision.Radio_SX1280=Radio-SX1280
+tlora_pager.menu.Revision.Radio_SX1280.build.board=LILYGO_LORA_SX1280
+tlora_pager.menu.Revision.Radio_SX1262=Radio-SX1262
+tlora_pager.menu.Revision.Radio_SX1262.build.board=LILYGO_LORA_SX1262
+tlora_pager.menu.Revision.Radio_CC1101=Radio-CC1101
+tlora_pager.menu.Revision.Radio_CC1101.build.board=LILYGO_LORA_CC1101
 
 ##############################################################
 
@@ -7790,7 +7958,7 @@ sparkfun_esp32s3_thing_plus.menu.ZigbeeMode.default.build.zigbee_mode=
 sparkfun_esp32s3_thing_plus.menu.ZigbeeMode.default.build.zigbee_libs=
 sparkfun_esp32s3_thing_plus.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
 sparkfun_esp32s3_thing_plus.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-sparkfun_esp32s3_thing_plus.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+sparkfun_esp32s3_thing_plus.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 
@@ -7970,13 +8138,10 @@ sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.default.build.zigbee_mode=
 sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.default.build.zigbee_libs=
 sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.ed=Zigbee ED (end device)
 sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
-sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
+sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api.ed -lzboss_stack.ed -lzboss_port.native
 sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
-sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
-sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
-sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
+sparkfun_esp32c6_thing_plus.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.native
 
 ##############################################################
 
@@ -8563,13 +8728,10 @@ sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.default.build.zigbee_mode=
 sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.default.build.zigbee_libs=
 sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.ed=Zigbee ED (end device)
 sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
-sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
+sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api.ed -lzboss_stack.ed -lzboss_port.native
 sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
-sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
-sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
-sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
+sparkfun_esp32c6_qwiic_pocket.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.native
 
 ##############################################################
 
@@ -11797,13 +11959,10 @@ dfrobot_beetle_esp32c6.menu.ZigbeeMode.default.build.zigbee_mode=
 dfrobot_beetle_esp32c6.menu.ZigbeeMode.default.build.zigbee_libs=
 dfrobot_beetle_esp32c6.menu.ZigbeeMode.ed=Zigbee ED (end device)
 dfrobot_beetle_esp32c6.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
-dfrobot_beetle_esp32c6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
+dfrobot_beetle_esp32c6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api.ed -lzboss_stack.ed -lzboss_port.native
 dfrobot_beetle_esp32c6.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 dfrobot_beetle_esp32c6.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-dfrobot_beetle_esp32c6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
-dfrobot_beetle_esp32c6.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
-dfrobot_beetle_esp32c6.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
-dfrobot_beetle_esp32c6.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
+dfrobot_beetle_esp32c6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.native
 
 ##############################################################
 
@@ -12346,14 +12505,10 @@ dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.default.build.zigbee_mode=
 dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.default.build.zigbee_libs=
 dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.ed=Zigbee ED (end device)
 dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
-dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
+dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api.ed -lzboss_stack.ed -lzboss_port.native
 dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
-dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
-dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
-dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
-
+dfrobot_firebeetle2_esp32c6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.native
 ##############################################################
 
 # dfrobot Romeo ESP32-S3
@@ -12948,7 +13103,7 @@ adafruit_metro_esp32s2.menu.ZigbeeMode.default.build.zigbee_mode=
 adafruit_metro_esp32s2.menu.ZigbeeMode.default.build.zigbee_libs=
 adafruit_metro_esp32s2.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 adafruit_metro_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-adafruit_metro_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+adafruit_metro_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 # Adafruit Metro ESP32-S3
@@ -13151,7 +13306,7 @@ adafruit_metro_esp32s3.menu.ZigbeeMode.default.build.zigbee_mode=
 adafruit_metro_esp32s3.menu.ZigbeeMode.default.build.zigbee_libs=
 adafruit_metro_esp32s3.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 adafruit_metro_esp32s3.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-adafruit_metro_esp32s3.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+adafruit_metro_esp32s3.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 # Adafruit MagTag 2.9"
@@ -13334,7 +13489,7 @@ adafruit_magtag29_esp32s2.menu.ZigbeeMode.default.build.zigbee_mode=
 adafruit_magtag29_esp32s2.menu.ZigbeeMode.default.build.zigbee_libs=
 adafruit_magtag29_esp32s2.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 adafruit_magtag29_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-adafruit_magtag29_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+adafruit_magtag29_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 # Adafruit FunHouse
@@ -13517,7 +13672,7 @@ adafruit_funhouse_esp32s2.menu.ZigbeeMode.default.build.zigbee_mode=
 adafruit_funhouse_esp32s2.menu.ZigbeeMode.default.build.zigbee_libs=
 adafruit_funhouse_esp32s2.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 adafruit_funhouse_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-adafruit_funhouse_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+adafruit_funhouse_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 # Adafruit ESP32 Feather
@@ -13651,7 +13806,7 @@ featheresp32.menu.ZigbeeMode.default.build.zigbee_mode=
 featheresp32.menu.ZigbeeMode.default.build.zigbee_libs=
 featheresp32.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 featheresp32.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-featheresp32.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+featheresp32.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 # Adafruit Feather ESP32 V2
@@ -13772,7 +13927,7 @@ adafruit_feather_esp32_v2.menu.ZigbeeMode.default.build.zigbee_mode=
 adafruit_feather_esp32_v2.menu.ZigbeeMode.default.build.zigbee_libs=
 adafruit_feather_esp32_v2.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 adafruit_feather_esp32_v2.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-adafruit_feather_esp32_v2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+adafruit_feather_esp32_v2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 # Adafruit Feather ESP32-S2
@@ -13955,7 +14110,7 @@ adafruit_feather_esp32s2.menu.ZigbeeMode.default.build.zigbee_mode=
 adafruit_feather_esp32s2.menu.ZigbeeMode.default.build.zigbee_libs=
 adafruit_feather_esp32s2.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 adafruit_feather_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-adafruit_feather_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+adafruit_feather_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 # Adafruit Feather ESP32-S2 TFT
@@ -14138,7 +14293,7 @@ adafruit_feather_esp32s2_tft.menu.ZigbeeMode.default.build.zigbee_mode=
 adafruit_feather_esp32s2_tft.menu.ZigbeeMode.default.build.zigbee_libs=
 adafruit_feather_esp32s2_tft.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 adafruit_feather_esp32s2_tft.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-adafruit_feather_esp32s2_tft.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+adafruit_feather_esp32s2_tft.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 # Adafruit Feather ESP32-S2 Reverse TFT
@@ -14321,7 +14476,7 @@ adafruit_feather_esp32s2_reversetft.menu.ZigbeeMode.default.build.zigbee_mode=
 adafruit_feather_esp32s2_reversetft.menu.ZigbeeMode.default.build.zigbee_libs=
 adafruit_feather_esp32s2_reversetft.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 adafruit_feather_esp32s2_reversetft.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-adafruit_feather_esp32s2_reversetft.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+adafruit_feather_esp32s2_reversetft.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 # Adafruit Feather ESP32-S3 2MB PSRAM
@@ -14539,7 +14694,7 @@ adafruit_feather_esp32s3.menu.ZigbeeMode.default.build.zigbee_mode=
 adafruit_feather_esp32s3.menu.ZigbeeMode.default.build.zigbee_libs=
 adafruit_feather_esp32s3.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 adafruit_feather_esp32s3.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-adafruit_feather_esp32s3.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+adafruit_feather_esp32s3.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 # Adafruit Feather ESP32-S3 No PSRAM
@@ -14726,7 +14881,7 @@ adafruit_feather_esp32s3_nopsram.menu.ZigbeeMode.default.build.zigbee_mode=
 adafruit_feather_esp32s3_nopsram.menu.ZigbeeMode.default.build.zigbee_libs=
 adafruit_feather_esp32s3_nopsram.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 adafruit_feather_esp32s3_nopsram.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-adafruit_feather_esp32s3_nopsram.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+adafruit_feather_esp32s3_nopsram.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 # Adafruit Feather ESP32-S3 TFT
@@ -14944,7 +15099,7 @@ adafruit_feather_esp32s3_tft.menu.ZigbeeMode.default.build.zigbee_mode=
 adafruit_feather_esp32s3_tft.menu.ZigbeeMode.default.build.zigbee_libs=
 adafruit_feather_esp32s3_tft.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 adafruit_feather_esp32s3_tft.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-adafruit_feather_esp32s3_tft.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+adafruit_feather_esp32s3_tft.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 # Adafruit Feather ESP32-S3 Reverse TFT
@@ -15162,7 +15317,7 @@ adafruit_feather_esp32s3_reversetft.menu.ZigbeeMode.default.build.zigbee_mode=
 adafruit_feather_esp32s3_reversetft.menu.ZigbeeMode.default.build.zigbee_libs=
 adafruit_feather_esp32s3_reversetft.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 adafruit_feather_esp32s3_reversetft.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-adafruit_feather_esp32s3_reversetft.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+adafruit_feather_esp32s3_reversetft.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 #############################
 # Feather C6
@@ -15334,15 +15489,10 @@ adafruit_feather_esp32c6.menu.ZigbeeMode.default.build.zigbee_mode=
 adafruit_feather_esp32c6.menu.ZigbeeMode.default.build.zigbee_libs=
 adafruit_feather_esp32c6.menu.ZigbeeMode.ed=Zigbee ED (end device)
 adafruit_feather_esp32c6.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
-adafruit_feather_esp32c6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
+adafruit_feather_esp32c6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api.ed -lzboss_stack.ed -lzboss_port.native
 adafruit_feather_esp32c6.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 adafruit_feather_esp32c6.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-adafruit_feather_esp32c6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
-adafruit_feather_esp32c6.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
-adafruit_feather_esp32c6.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
-adafruit_feather_esp32c6.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
-
-
+adafruit_feather_esp32c6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.native
 
 ##############################################################
 # Adafruit QT Py ESP32
@@ -15463,7 +15613,7 @@ adafruit_qtpy_esp32_pico.menu.ZigbeeMode.default.build.zigbee_mode=
 adafruit_qtpy_esp32_pico.menu.ZigbeeMode.default.build.zigbee_libs=
 adafruit_qtpy_esp32_pico.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 adafruit_qtpy_esp32_pico.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-adafruit_qtpy_esp32_pico.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+adafruit_qtpy_esp32_pico.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 # Adafruit QT Py ESP32-C3
@@ -15598,7 +15748,7 @@ adafruit_qtpy_esp32c3.menu.ZigbeeMode.default.build.zigbee_mode=
 adafruit_qtpy_esp32c3.menu.ZigbeeMode.default.build.zigbee_libs=
 adafruit_qtpy_esp32c3.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 adafruit_qtpy_esp32c3.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-adafruit_qtpy_esp32c3.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+adafruit_qtpy_esp32c3.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 # Adafruit QT Py ESP32-S2
@@ -15781,7 +15931,7 @@ adafruit_qtpy_esp32s2.menu.ZigbeeMode.default.build.zigbee_mode=
 adafruit_qtpy_esp32s2.menu.ZigbeeMode.default.build.zigbee_libs=
 adafruit_qtpy_esp32s2.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 adafruit_qtpy_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-adafruit_qtpy_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+adafruit_qtpy_esp32s2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 # Adafruit QT Py ESP32-S3 No PSRAM
@@ -15968,7 +16118,7 @@ adafruit_qtpy_esp32s3_nopsram.menu.ZigbeeMode.default.build.zigbee_mode=
 adafruit_qtpy_esp32s3_nopsram.menu.ZigbeeMode.default.build.zigbee_libs=
 adafruit_qtpy_esp32s3_nopsram.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 adafruit_qtpy_esp32s3_nopsram.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-adafruit_qtpy_esp32s3_nopsram.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+adafruit_qtpy_esp32s3_nopsram.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 # Adafruit QT Py ESP32-S3 (4M Flash 2M PSRAM)
@@ -16186,7 +16336,7 @@ adafruit_qtpy_esp32s3_n4r2.menu.ZigbeeMode.default.build.zigbee_mode=
 adafruit_qtpy_esp32s3_n4r2.menu.ZigbeeMode.default.build.zigbee_libs=
 adafruit_qtpy_esp32s3_n4r2.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 adafruit_qtpy_esp32s3_n4r2.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-adafruit_qtpy_esp32s3_n4r2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+adafruit_qtpy_esp32s3_n4r2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 # Adafruit ItsyBitsy ESP32
@@ -16304,7 +16454,7 @@ adafruit_itsybitsy_esp32.menu.ZigbeeMode.default.build.zigbee_mode=
 adafruit_itsybitsy_esp32.menu.ZigbeeMode.default.build.zigbee_libs=
 adafruit_itsybitsy_esp32.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 adafruit_itsybitsy_esp32.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-adafruit_itsybitsy_esp32.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+adafruit_itsybitsy_esp32.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 # Adafruit MatrixPortal ESP32-S3
@@ -16501,7 +16651,7 @@ adafruit_matrixportal_esp32s3.menu.ZigbeeMode.default.build.zigbee_mode=
 adafruit_matrixportal_esp32s3.menu.ZigbeeMode.default.build.zigbee_libs=
 adafruit_matrixportal_esp32s3.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 adafruit_matrixportal_esp32s3.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-adafruit_matrixportal_esp32s3.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+adafruit_matrixportal_esp32s3.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 # Adafruit pyCamera S3
@@ -16719,7 +16869,7 @@ adafruit_camera_esp32s3.menu.ZigbeeMode.default.build.zigbee_mode=
 adafruit_camera_esp32s3.menu.ZigbeeMode.default.build.zigbee_libs=
 adafruit_camera_esp32s3.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 adafruit_camera_esp32s3.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-adafruit_camera_esp32s3.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+adafruit_camera_esp32s3.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 # Adafruit Qualia ESP32-S3 RGB666
@@ -16922,7 +17072,7 @@ adafruit_qualia_s3_rgb666.menu.ZigbeeMode.default.build.zigbee_mode=
 adafruit_qualia_s3_rgb666.menu.ZigbeeMode.default.build.zigbee_libs=
 adafruit_qualia_s3_rgb666.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 adafruit_qualia_s3_rgb666.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-adafruit_qualia_s3_rgb666.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+adafruit_qualia_s3_rgb666.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 # Adafruit Sparkle Motion w/ESP32
@@ -17056,7 +17206,7 @@ sparklemotion.menu.ZigbeeMode.default.build.zigbee_mode=
 sparklemotion.menu.ZigbeeMode.default.build.zigbee_libs=
 sparklemotion.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 sparklemotion.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-sparklemotion.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+sparklemotion.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 # Adafruit Sparkle Motion Mini w/ESP32
@@ -17190,7 +17340,7 @@ sparklemotionmini.menu.ZigbeeMode.default.build.zigbee_mode=
 sparklemotionmini.menu.ZigbeeMode.default.build.zigbee_libs=
 sparklemotionmini.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 sparklemotionmini.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-sparklemotionmini.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+sparklemotionmini.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 
@@ -17644,7 +17794,7 @@ nologo_esp32s3_pico.menu.ZigbeeMode.default.build.zigbee_mode=
 nologo_esp32s3_pico.menu.ZigbeeMode.default.build.zigbee_libs=
 nologo_esp32s3_pico.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 nologo_esp32s3_pico.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-nologo_esp32s3_pico.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+nologo_esp32s3_pico.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 
@@ -19577,13 +19727,10 @@ esp32c6-evb.menu.ZigbeeMode.default.build.zigbee_mode=
 esp32c6-evb.menu.ZigbeeMode.default.build.zigbee_libs=
 esp32c6-evb.menu.ZigbeeMode.ed=Zigbee ED (end device)
 esp32c6-evb.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
-esp32c6-evb.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
+esp32c6-evb.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api.ed -lzboss_stack.ed -lzboss_port.native
 esp32c6-evb.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 esp32c6-evb.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-esp32c6-evb.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
-esp32c6-evb.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
-esp32c6-evb.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
-esp32c6-evb.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
+esp32c6-evb.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.native
 
 ##############################################################
 
@@ -19757,13 +19904,10 @@ esp32h2-devkitlipo.menu.ZigbeeMode.default.build.zigbee_mode=
 esp32h2-devkitlipo.menu.ZigbeeMode.default.build.zigbee_libs=
 esp32h2-devkitlipo.menu.ZigbeeMode.ed=Zigbee ED (end device)
 esp32h2-devkitlipo.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
-esp32h2-devkitlipo.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
+esp32h2-devkitlipo.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api.ed -lzboss_stack.ed -lzboss_port.native
 esp32h2-devkitlipo.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 esp32h2-devkitlipo.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-esp32h2-devkitlipo.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
-esp32h2-devkitlipo.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
-esp32h2-devkitlipo.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
-esp32h2-devkitlipo.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
+esp32h2-devkitlipo.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.native
 
 ##############################################################
 
@@ -19954,7 +20098,7 @@ esp32-sbc-fabgl.menu.ZigbeeMode.default.build.zigbee_mode=
 esp32-sbc-fabgl.menu.ZigbeeMode.default.build.zigbee_libs=
 esp32-sbc-fabgl.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 esp32-sbc-fabgl.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-esp32-sbc-fabgl.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+esp32-sbc-fabgl.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 
@@ -24628,13 +24772,10 @@ m5stack_nanoc6.menu.ZigbeeMode.default.build.zigbee_mode=
 m5stack_nanoc6.menu.ZigbeeMode.default.build.zigbee_libs=
 m5stack_nanoc6.menu.ZigbeeMode.ed=Zigbee ED (end device)
 m5stack_nanoc6.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
-m5stack_nanoc6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
+m5stack_nanoc6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api.ed -lzboss_stack.ed -lzboss_port.native
 m5stack_nanoc6.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 m5stack_nanoc6.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-m5stack_nanoc6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
-m5stack_nanoc6.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
-m5stack_nanoc6.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
-m5stack_nanoc6.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
+m5stack_nanoc6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.native
 
 ##############################################################
 
@@ -35023,13 +35164,10 @@ XIAO_ESP32C6.menu.ZigbeeMode.default.build.zigbee_mode=
 XIAO_ESP32C6.menu.ZigbeeMode.default.build.zigbee_libs=
 XIAO_ESP32C6.menu.ZigbeeMode.ed=Zigbee ED (end device)
 XIAO_ESP32C6.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
-XIAO_ESP32C6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
+XIAO_ESP32C6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api.ed -lzboss_stack.ed -lzboss_port.native
 XIAO_ESP32C6.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 XIAO_ESP32C6.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-XIAO_ESP32C6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
-XIAO_ESP32C6.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
-XIAO_ESP32C6.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
-XIAO_ESP32C6.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
+XIAO_ESP32C6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.native
 
 ##############################################################
 
@@ -35291,6 +35429,8 @@ XIAO_ESP32S3_Plus.menu.FlashMode.dio.build.flash_freq=80m
 
 XIAO_ESP32S3_Plus.menu.FlashSize.8M=8MB (64Mb)
 XIAO_ESP32S3_Plus.menu.FlashSize.8M.build.flash_size=8MB
+XIAO_ESP32S3_Plus.menu.FlashSize.16M=16MB (128Mb)
+XIAO_ESP32S3_Plus.menu.FlashSize.16M.build.flash_size=16MB
 
 XIAO_ESP32S3_Plus.menu.LoopCore.1=Core 1
 XIAO_ESP32S3_Plus.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
@@ -35329,6 +35469,12 @@ XIAO_ESP32S3_Plus.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
 XIAO_ESP32S3_Plus.menu.UploadMode.cdc.upload.use_1200bps_touch=true
 XIAO_ESP32S3_Plus.menu.UploadMode.cdc.upload.wait_for_upload_port=true
 
+XIAO_ESP32S3_Plus.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
+XIAO_ESP32S3_Plus.menu.PartitionScheme.fatflash.build.partitions=ffat
+XIAO_ESP32S3_Plus.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
+XIAO_ESP32S3_Plus.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
+XIAO_ESP32S3_Plus.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
+XIAO_ESP32S3_Plus.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
 XIAO_ESP32S3_Plus.menu.PartitionScheme.default_8MB=Default with spiffs (3MB APP/1.5MB SPIFFS)
 XIAO_ESP32S3_Plus.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
 XIAO_ESP32S3_Plus.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
@@ -39562,13 +39708,10 @@ ioxesp32c6.menu.ZigbeeMode.default.build.zigbee_mode=
 ioxesp32c6.menu.ZigbeeMode.default.build.zigbee_libs=
 ioxesp32c6.menu.ZigbeeMode.ed=Zigbee ED (end device)
 ioxesp32c6.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
-ioxesp32c6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
+ioxesp32c6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api.ed -lzboss_stack.ed -lzboss_port.native
 ioxesp32c6.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
 ioxesp32c6.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-ioxesp32c6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
-ioxesp32c6.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
-ioxesp32c6.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
-ioxesp32c6.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
+ioxesp32c6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.native
 
 ##############################################################
 # ATD1.47-S3
@@ -40746,13 +40889,10 @@ epulse_feather_c6.menu.ZigbeeMode.default.build.zigbee_mode=
 epulse_feather_c6.menu.ZigbeeMode.default.build.zigbee_libs=
 epulse_feather_c6.menu.ZigbeeMode.ed=Zigbee ED (end device)
 epulse_feather_c6.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
-epulse_feather_c6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
+epulse_feather_c6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api.ed -lzboss_stack.ed -lzboss_port.native
 epulse_feather_c6.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 epulse_feather_c6.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-epulse_feather_c6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
-epulse_feather_c6.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
-epulse_feather_c6.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
-epulse_feather_c6.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
+epulse_feather_c6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.native
 
 ##############################################################
 
@@ -40885,6 +41025,122 @@ Geekble_ESP32C3.menu.EraseFlash.all.upload.erase_cmd=-e
 
 ##############################################################
 
+Geekble_Nano_ESP32S3.name=Geekble nano ESP32-S3
+Geekble_Nano_ESP32S3.vid.0=0x303a
+Geekble_Nano_ESP32S3.pid.0= 0x82C5
+Geekble_Nano_ESP32S3.upload_port.0.vid=0x303a
+Geekble_Nano_ESP32S3.upload_port.0.pid= 0x82C5
+
+Geekble_Nano_ESP32S3.bootloader.tool=esptool_py
+Geekble_Nano_ESP32S3.bootloader.tool.default=esptool_py
+
+Geekble_Nano_ESP32S3.upload.tool=esptool_py
+Geekble_Nano_ESP32S3.upload.tool.default=esptool_py
+Geekble_Nano_ESP32S3.upload.tool.network=esp_ota
+
+Geekble_Nano_ESP32S3.upload.maximum_size=1310720
+Geekble_Nano_ESP32S3.upload.maximum_data_size=327680
+Geekble_Nano_ESP32S3.upload.speed=921600
+Geekble_Nano_ESP32S3.upload.flags=
+Geekble_Nano_ESP32S3.upload.extra_flags=
+Geekble_Nano_ESP32S3.upload.use_1200bps_touch=false
+Geekble_Nano_ESP32S3.upload.wait_for_upload_port=false
+
+Geekble_Nano_ESP32S3.serial.disableDTR=false
+Geekble_Nano_ESP32S3.serial.disableRTS=false
+
+Geekble_Nano_ESP32S3.build.tarch=xtensa
+Geekble_Nano_ESP32S3.build.bootloader_addr=0x0
+Geekble_Nano_ESP32S3.build.target=esp32s3
+Geekble_Nano_ESP32S3.build.mcu=esp32s3
+Geekble_Nano_ESP32S3.build.core=esp32
+Geekble_Nano_ESP32S3.build.variant=Geekble_Nano_ESP32S3
+Geekble_Nano_ESP32S3.build.board=GEEKBLE_NANO_ESP32S3
+
+Geekble_Nano_ESP32S3.build.usb_mode=1
+Geekble_Nano_ESP32S3.build.cdc_on_boot=1
+Geekble_Nano_ESP32S3.build.msc_on_boot=0
+Geekble_Nano_ESP32S3.build.dfu_on_boot=0
+Geekble_Nano_ESP32S3.build.f_cpu=240000000L
+Geekble_Nano_ESP32S3.build.flash_size=4MB
+Geekble_Nano_ESP32S3.build.flash_freq=80m
+Geekble_Nano_ESP32S3.build.flash_mode=dio
+Geekble_Nano_ESP32S3.build.boot=qio
+Geekble_Nano_ESP32S3.build.partitions=default
+Geekble_Nano_ESP32S3.build.defines=
+Geekble_Nano_ESP32S3.build.memory_type=qio_qspi
+Geekble_Nano_ESP32S3.build.loop_core=-DARDUINO_RUNNING_CORE=1
+Geekble_Nano_ESP32S3.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
+
+Geekble_Nano_ESP32S3.menu.USBMode.default=USB-OTG (TinyUSB)
+Geekble_Nano_ESP32S3.menu.USBMode.default.build.usb_mode=0
+Geekble_Nano_ESP32S3.menu.USBMode.default.build.cdc_on_boot=1
+Geekble_Nano_ESP32S3.menu.USBMode.hwcdc=Hardware CDC and JTAG
+Geekble_Nano_ESP32S3.menu.USBMode.hwcdc.build.usb_mode=1
+Geekble_Nano_ESP32S3.menu.USBMode.hwcdc.build.cdc_on_boot=1
+
+Geekble_Nano_ESP32S3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
+Geekble_Nano_ESP32S3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
+Geekble_Nano_ESP32S3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
+
+Geekble_Nano_ESP32S3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
+Geekble_Nano_ESP32S3.menu.PartitionScheme.default.build.partitions=default
+Geekble_Nano_ESP32S3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
+Geekble_Nano_ESP32S3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
+Geekble_Nano_ESP32S3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
+Geekble_Nano_ESP32S3.menu.PartitionScheme.no_ota.build.partitions=no_ota
+Geekble_Nano_ESP32S3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
+Geekble_Nano_ESP32S3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
+Geekble_Nano_ESP32S3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
+Geekble_Nano_ESP32S3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
+Geekble_Nano_ESP32S3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
+Geekble_Nano_ESP32S3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
+Geekble_Nano_ESP32S3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
+Geekble_Nano_ESP32S3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
+Geekble_Nano_ESP32S3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
+Geekble_Nano_ESP32S3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
+Geekble_Nano_ESP32S3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
+Geekble_Nano_ESP32S3.menu.PartitionScheme.huge_app.build.partitions=huge_app
+Geekble_Nano_ESP32S3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
+Geekble_Nano_ESP32S3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
+Geekble_Nano_ESP32S3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
+Geekble_Nano_ESP32S3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
+Geekble_Nano_ESP32S3.menu.PartitionScheme.rainmaker=RainMaker 4MB
+Geekble_Nano_ESP32S3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
+Geekble_Nano_ESP32S3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
+Geekble_Nano_ESP32S3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
+Geekble_Nano_ESP32S3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
+Geekble_Nano_ESP32S3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
+Geekble_Nano_ESP32S3.menu.PartitionScheme.otanofs=OTA no FS (2MB APP with OTA)
+Geekble_Nano_ESP32S3.menu.PartitionScheme.otanofs.build.custom_partitions=ota_nofs_4MB
+Geekble_Nano_ESP32S3.menu.PartitionScheme.otanofs.upload.maximum_size=2031616
+Geekble_Nano_ESP32S3.menu.PartitionScheme.all_app=Max APP (4MB APP no OTA)
+Geekble_Nano_ESP32S3.menu.PartitionScheme.all_app.build.custom_partitions=max_app_4MB
+Geekble_Nano_ESP32S3.menu.PartitionScheme.all_app.upload.maximum_size=4063232
+Geekble_Nano_ESP32S3.menu.PartitionScheme.custom=Custom
+Geekble_Nano_ESP32S3.menu.PartitionScheme.custom.build.partitions=
+Geekble_Nano_ESP32S3.menu.PartitionScheme.custom.upload.maximum_size=16777216
+
+Geekble_Nano_ESP32S3.menu.DebugLevel.none=None
+Geekble_Nano_ESP32S3.menu.DebugLevel.none.build.code_debug=0
+Geekble_Nano_ESP32S3.menu.DebugLevel.error=Error
+Geekble_Nano_ESP32S3.menu.DebugLevel.error.build.code_debug=1
+Geekble_Nano_ESP32S3.menu.DebugLevel.warn=Warn
+Geekble_Nano_ESP32S3.menu.DebugLevel.warn.build.code_debug=2
+Geekble_Nano_ESP32S3.menu.DebugLevel.info=Info
+Geekble_Nano_ESP32S3.menu.DebugLevel.info.build.code_debug=3
+Geekble_Nano_ESP32S3.menu.DebugLevel.debug=Debug
+Geekble_Nano_ESP32S3.menu.DebugLevel.debug.build.code_debug=4
+Geekble_Nano_ESP32S3.menu.DebugLevel.verbose=Verbose
+Geekble_Nano_ESP32S3.menu.DebugLevel.verbose.build.code_debug=5
+
+Geekble_Nano_ESP32S3.menu.EraseFlash.none=Disabled
+Geekble_Nano_ESP32S3.menu.EraseFlash.none.upload.erase_cmd=
+Geekble_Nano_ESP32S3.menu.EraseFlash.all=Enabled
+Geekble_Nano_ESP32S3.menu.EraseFlash.all.upload.erase_cmd=-e
+
+##############################################################
+
 waveshare_esp32_s3_zero.name=Waveshare ESP32-S3-Zero
 waveshare_esp32_s3_zero.vid.0=0x303a
 waveshare_esp32_s3_zero.pid.0=0x822B
@@ -43230,7 +43486,7 @@ jczn_2432s028r.menu.ZigbeeMode.default.build.zigbee_mode=
 jczn_2432s028r.menu.ZigbeeMode.default.build.zigbee_libs=
 jczn_2432s028r.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 jczn_2432s028r.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-jczn_2432s028r.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+jczn_2432s028r.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 
@@ -44873,7 +45129,7 @@ waveshare_esp32_s3_touch_lcd_185.menu.ZigbeeMode.default.build.zigbee_mode=
 waveshare_esp32_s3_touch_lcd_185.menu.ZigbeeMode.default.build.zigbee_libs=
 waveshare_esp32_s3_touch_lcd_185.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 waveshare_esp32_s3_touch_lcd_185.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-waveshare_esp32_s3_touch_lcd_185.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+waveshare_esp32_s3_touch_lcd_185.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 
@@ -45040,13 +45296,10 @@ cezerio_dev_esp32c6.menu.ZigbeeMode.default.build.zigbee_mode=
 cezerio_dev_esp32c6.menu.ZigbeeMode.default.build.zigbee_libs=
 cezerio_dev_esp32c6.menu.ZigbeeMode.ed=Zigbee ED (end device)
 cezerio_dev_esp32c6.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
-cezerio_dev_esp32c6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
+cezerio_dev_esp32c6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api.ed -lzboss_stack.ed -lzboss_port.native
 cezerio_dev_esp32c6.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
 cezerio_dev_esp32c6.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-cezerio_dev_esp32c6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
-cezerio_dev_esp32c6.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
-cezerio_dev_esp32c6.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
-cezerio_dev_esp32c6.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
+cezerio_dev_esp32c6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.native
 
 ##############################################################
 
@@ -45213,13 +45466,10 @@ cezerio_mini_dev_esp32c6.menu.ZigbeeMode.default.build.zigbee_mode=
 cezerio_mini_dev_esp32c6.menu.ZigbeeMode.default.build.zigbee_libs=
 cezerio_mini_dev_esp32c6.menu.ZigbeeMode.ed=Zigbee ED (end device)
 cezerio_mini_dev_esp32c6.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
-cezerio_mini_dev_esp32c6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
+cezerio_mini_dev_esp32c6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api.ed -lzboss_stack.ed -lzboss_port.native
 cezerio_mini_dev_esp32c6.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator)
 cezerio_mini_dev_esp32c6.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-cezerio_mini_dev_esp32c6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
-cezerio_mini_dev_esp32c6.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
-cezerio_mini_dev_esp32c6.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
-cezerio_mini_dev_esp32c6.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
+cezerio_mini_dev_esp32c6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.native
 
 ##############################################################
 
@@ -45456,7 +45706,7 @@ waveshare_esp32_s3_lcd_185.menu.ZigbeeMode.default.build.zigbee_mode=
 waveshare_esp32_s3_lcd_185.menu.ZigbeeMode.default.build.zigbee_libs=
 waveshare_esp32_s3_lcd_185.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 waveshare_esp32_s3_lcd_185.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-waveshare_esp32_s3_lcd_185.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+waveshare_esp32_s3_lcd_185.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.native
 
 ##############################################################
 
@@ -45693,7 +45943,7 @@ waveshare_esp32_s3_touch_lcd_146.menu.ZigbeeMode.default.build.zigbee_mode=
 waveshare_esp32_s3_touch_lcd_146.menu.ZigbeeMode.default.build.zigbee_libs=
 waveshare_esp32_s3_touch_lcd_146.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 waveshare_esp32_s3_touch_lcd_146.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-waveshare_esp32_s3_touch_lcd_146.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+waveshare_esp32_s3_touch_lcd_146.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 
@@ -45930,7 +46180,7 @@ waveshare_esp32_s3_lcd_146.menu.ZigbeeMode.default.build.zigbee_mode=
 waveshare_esp32_s3_lcd_146.menu.ZigbeeMode.default.build.zigbee_libs=
 waveshare_esp32_s3_lcd_146.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 waveshare_esp32_s3_lcd_146.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-waveshare_esp32_s3_lcd_146.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+waveshare_esp32_s3_lcd_146.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 
@@ -46167,7 +46417,7 @@ waveshare_esp32_s3_touch_lcd_185_box.menu.ZigbeeMode.default.build.zigbee_mode=
 waveshare_esp32_s3_touch_lcd_185_box.menu.ZigbeeMode.default.build.zigbee_libs=
 waveshare_esp32_s3_touch_lcd_185_box.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 waveshare_esp32_s3_touch_lcd_185_box.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-waveshare_esp32_s3_touch_lcd_185_box.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+waveshare_esp32_s3_touch_lcd_185_box.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 
@@ -46404,7 +46654,7 @@ waveshare_esp32_s3_lcd_147.menu.ZigbeeMode.default.build.zigbee_mode=
 waveshare_esp32_s3_lcd_147.menu.ZigbeeMode.default.build.zigbee_libs=
 waveshare_esp32_s3_lcd_147.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 waveshare_esp32_s3_lcd_147.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-waveshare_esp32_s3_lcd_147.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+waveshare_esp32_s3_lcd_147.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 
@@ -46641,7 +46891,7 @@ waveshare_esp32_s3_touch_lcd_21.menu.ZigbeeMode.default.build.zigbee_mode=
 waveshare_esp32_s3_touch_lcd_21.menu.ZigbeeMode.default.build.zigbee_libs=
 waveshare_esp32_s3_touch_lcd_21.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 waveshare_esp32_s3_touch_lcd_21.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-waveshare_esp32_s3_touch_lcd_21.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+waveshare_esp32_s3_touch_lcd_21.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 
@@ -46878,7 +47128,7 @@ waveshare_esp32_s3_touch_lcd_28.menu.ZigbeeMode.default.build.zigbee_mode=
 waveshare_esp32_s3_touch_lcd_28.menu.ZigbeeMode.default.build.zigbee_libs=
 waveshare_esp32_s3_touch_lcd_28.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 waveshare_esp32_s3_touch_lcd_28.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-waveshare_esp32_s3_touch_lcd_28.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+waveshare_esp32_s3_touch_lcd_28.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 
@@ -47118,7 +47368,7 @@ waveshare_esp32_s3_relay_6ch.menu.ZigbeeMode.default.build.zigbee_mode=
 waveshare_esp32_s3_relay_6ch.menu.ZigbeeMode.default.build.zigbee_libs=
 waveshare_esp32_s3_relay_6ch.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 waveshare_esp32_s3_relay_6ch.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-waveshare_esp32_s3_relay_6ch.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
+waveshare_esp32_s3_relay_6ch.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
 
 ##############################################################
 
@@ -48017,17 +48267,13 @@ Pcbcupid_GLYPH_H2.menu.ZigbeeMode.default.build.zigbee_mode=
 Pcbcupid_GLYPH_H2.menu.ZigbeeMode.default.build.zigbee_libs=
 Pcbcupid_GLYPH_H2.menu.ZigbeeMode.ed=Zigbee ED (end device)
 Pcbcupid_GLYPH_H2.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
-Pcbcupid_GLYPH_H2.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
+Pcbcupid_GLYPH_H2.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api.ed -lzboss_stack.ed -lzboss_port.native
 Pcbcupid_GLYPH_H2.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 Pcbcupid_GLYPH_H2.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-Pcbcupid_GLYPH_H2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
-Pcbcupid_GLYPH_H2.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
-Pcbcupid_GLYPH_H2.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
-Pcbcupid_GLYPH_H2.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
+Pcbcupid_GLYPH_H2.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.native
 
 ##############################################################
 
-
 Pcbcupid_GLYPH_C6.name=Pcbcupid GLYPH C6
 
 Pcbcupid_GLYPH_C6.bootloader.tool=esptool_py
@@ -48172,13 +48418,10 @@ Pcbcupid_GLYPH_C6.menu.ZigbeeMode.default.build.zigbee_mode=
 Pcbcupid_GLYPH_C6.menu.ZigbeeMode.default.build.zigbee_libs=
 Pcbcupid_GLYPH_C6.menu.ZigbeeMode.ed=Zigbee ED (end device)
 Pcbcupid_GLYPH_C6.menu.ZigbeeMode.ed.build.zigbee_mode=-DZIGBEE_MODE_ED
-Pcbcupid_GLYPH_C6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api_ed -lesp_zb_cli_command -lzboss_stack.ed -lzboss_port
+Pcbcupid_GLYPH_C6.menu.ZigbeeMode.ed.build.zigbee_libs=-lesp_zb_api.ed -lzboss_stack.ed -lzboss_port.native
 Pcbcupid_GLYPH_C6.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
 Pcbcupid_GLYPH_C6.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
-Pcbcupid_GLYPH_C6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api_zczr -lesp_zb_cli_command -lzboss_stack.zczr -lzboss_port
-Pcbcupid_GLYPH_C6.menu.ZigbeeMode.rcp=Zigbee RCP (radio co-processor)
-Pcbcupid_GLYPH_C6.menu.ZigbeeMode.rcp.build.zigbee_mode=-DZIGBEE_MODE_RCP
-Pcbcupid_GLYPH_C6.menu.ZigbeeMode.rcp.build.zigbee_libs=-lesp_zb_api_rcp -lesp_zb_cli_command -lzboss_stack.rcp -lzboss_port
+Pcbcupid_GLYPH_C6.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.native
 
 ##############################################################
 
@@ -49095,3 +49338,255 @@ huidu_hd_wf4.menu.EraseFlash.all=Enabled
 huidu_hd_wf4.menu.EraseFlash.all.upload.erase_cmd=-e
 
 ##############################################################
+
+# CYOBot (CYOBrain V2 ESP32S3) Board
+cyobot_v2_esp32s3.name=CYOBOT V2 ESP32S3
+
+cyobot_v2_esp32s3.bootloader.tool=esptool_py
+cyobot_v2_esp32s3.bootloader.tool.default=esptool_py
+
+cyobot_v2_esp32s3.upload.tool=esptool_py
+cyobot_v2_esp32s3.upload.tool.default=esptool_py
+cyobot_v2_esp32s3.upload.tool.network=esp_ota
+
+cyobot_v2_esp32s3.upload.maximum_size=1310720
+cyobot_v2_esp32s3.upload.maximum_data_size=327680
+cyobot_v2_esp32s3.upload.flags=
+cyobot_v2_esp32s3.upload.extra_flags=
+cyobot_v2_esp32s3.upload.use_1200bps_touch=false
+cyobot_v2_esp32s3.upload.wait_for_upload_port=false
+
+cyobot_v2_esp32s3.serial.disableDTR=false
+cyobot_v2_esp32s3.serial.disableRTS=false
+
+cyobot_v2_esp32s3.build.tarch=xtensa
+cyobot_v2_esp32s3.build.bootloader_addr=0x0
+cyobot_v2_esp32s3.build.target=esp32s3
+cyobot_v2_esp32s3.build.mcu=esp32s3
+cyobot_v2_esp32s3.build.core=esp32
+cyobot_v2_esp32s3.build.variant=cyobot_v2_esp32s3
+cyobot_v2_esp32s3.build.board=CYOBOT_V2_ESP32S3
+
+cyobot_v2_esp32s3.build.usb_mode=1
+cyobot_v2_esp32s3.build.cdc_on_boot=0
+cyobot_v2_esp32s3.build.msc_on_boot=0
+cyobot_v2_esp32s3.build.dfu_on_boot=0
+cyobot_v2_esp32s3.build.f_cpu=240000000L
+cyobot_v2_esp32s3.build.flash_size=4MB
+cyobot_v2_esp32s3.build.flash_freq=80m
+cyobot_v2_esp32s3.build.flash_mode=dio
+cyobot_v2_esp32s3.build.boot=qio
+cyobot_v2_esp32s3.build.boot_freq=80m
+cyobot_v2_esp32s3.build.partitions=default
+cyobot_v2_esp32s3.build.defines=
+cyobot_v2_esp32s3.build.loop_core=
+cyobot_v2_esp32s3.build.event_core=
+cyobot_v2_esp32s3.build.psram_type=qspi
+cyobot_v2_esp32s3.build.memory_type={build.boot}_{build.psram_type}
+
+## IDE 2.0 Seems to not update the value
+cyobot_v2_esp32s3.menu.JTAGAdapter.default=Disabled
+cyobot_v2_esp32s3.menu.JTAGAdapter.default.build.copy_jtag_files=0
+cyobot_v2_esp32s3.menu.JTAGAdapter.builtin=Integrated USB JTAG
+cyobot_v2_esp32s3.menu.JTAGAdapter.builtin.build.openocdscript=cyobot_v2_esp32s3-builtin.cfg
+cyobot_v2_esp32s3.menu.JTAGAdapter.builtin.build.copy_jtag_files=1
+cyobot_v2_esp32s3.menu.JTAGAdapter.external=FTDI Adapter
+cyobot_v2_esp32s3.menu.JTAGAdapter.external.build.openocdscript=cyobot_v2_esp32s3-ftdi.cfg
+cyobot_v2_esp32s3.menu.JTAGAdapter.external.build.copy_jtag_files=1
+cyobot_v2_esp32s3.menu.JTAGAdapter.bridge=ESP USB Bridge
+cyobot_v2_esp32s3.menu.JTAGAdapter.bridge.build.openocdscript=cyobot_v2_esp32s3-bridge.cfg
+cyobot_v2_esp32s3.menu.JTAGAdapter.bridge.build.copy_jtag_files=1
+
+cyobot_v2_esp32s3.menu.PSRAM.disabled=Disabled
+cyobot_v2_esp32s3.menu.PSRAM.disabled.build.defines=
+cyobot_v2_esp32s3.menu.PSRAM.disabled.build.psram_type=qspi
+cyobot_v2_esp32s3.menu.PSRAM.enabled=QSPI PSRAM
+cyobot_v2_esp32s3.menu.PSRAM.enabled.build.defines=-DBOARD_HAS_PSRAM
+cyobot_v2_esp32s3.menu.PSRAM.enabled.build.psram_type=qspi
+cyobot_v2_esp32s3.menu.PSRAM.opi=OPI PSRAM
+cyobot_v2_esp32s3.menu.PSRAM.opi.build.defines=-DBOARD_HAS_PSRAM
+cyobot_v2_esp32s3.menu.PSRAM.opi.build.psram_type=opi
+
+cyobot_v2_esp32s3.menu.FlashMode.qio=QIO 80MHz
+cyobot_v2_esp32s3.menu.FlashMode.qio.build.flash_mode=dio
+cyobot_v2_esp32s3.menu.FlashMode.qio.build.boot=qio
+cyobot_v2_esp32s3.menu.FlashMode.qio.build.boot_freq=80m
+cyobot_v2_esp32s3.menu.FlashMode.qio.build.flash_freq=80m
+cyobot_v2_esp32s3.menu.FlashMode.qio120=QIO 120MHz
+cyobot_v2_esp32s3.menu.FlashMode.qio120.build.flash_mode=dio
+cyobot_v2_esp32s3.menu.FlashMode.qio120.build.boot=qio
+cyobot_v2_esp32s3.menu.FlashMode.qio120.build.boot_freq=120m
+cyobot_v2_esp32s3.menu.FlashMode.qio120.build.flash_freq=80m
+cyobot_v2_esp32s3.menu.FlashMode.dio=DIO 80MHz
+cyobot_v2_esp32s3.menu.FlashMode.dio.build.flash_mode=dio
+cyobot_v2_esp32s3.menu.FlashMode.dio.build.boot=dio
+cyobot_v2_esp32s3.menu.FlashMode.dio.build.boot_freq=80m
+cyobot_v2_esp32s3.menu.FlashMode.dio.build.flash_freq=80m
+cyobot_v2_esp32s3.menu.FlashMode.opi=OPI 80MHz
+cyobot_v2_esp32s3.menu.FlashMode.opi.build.flash_mode=dout
+cyobot_v2_esp32s3.menu.FlashMode.opi.build.boot=opi
+cyobot_v2_esp32s3.menu.FlashMode.opi.build.boot_freq=80m
+cyobot_v2_esp32s3.menu.FlashMode.opi.build.flash_freq=80m
+
+cyobot_v2_esp32s3.menu.FlashSize.4M=4MB (32Mb)
+cyobot_v2_esp32s3.menu.FlashSize.4M.build.flash_size=4MB
+cyobot_v2_esp32s3.menu.FlashSize.8M=8MB (64Mb)
+cyobot_v2_esp32s3.menu.FlashSize.8M.build.flash_size=8MB
+cyobot_v2_esp32s3.menu.FlashSize.16M=16MB (128Mb)
+cyobot_v2_esp32s3.menu.FlashSize.16M.build.flash_size=16MB
+cyobot_v2_esp32s3.menu.FlashSize.32M=32MB (256Mb)
+cyobot_v2_esp32s3.menu.FlashSize.32M.build.flash_size=32MB
+
+cyobot_v2_esp32s3.menu.LoopCore.1=Core 1
+cyobot_v2_esp32s3.menu.LoopCore.1.build.loop_core=-DARDUINO_RUNNING_CORE=1
+cyobot_v2_esp32s3.menu.LoopCore.0=Core 0
+cyobot_v2_esp32s3.menu.LoopCore.0.build.loop_core=-DARDUINO_RUNNING_CORE=0
+
+cyobot_v2_esp32s3.menu.EventsCore.1=Core 1
+cyobot_v2_esp32s3.menu.EventsCore.1.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=1
+cyobot_v2_esp32s3.menu.EventsCore.0=Core 0
+cyobot_v2_esp32s3.menu.EventsCore.0.build.event_core=-DARDUINO_EVENT_RUNNING_CORE=0
+
+cyobot_v2_esp32s3.menu.USBMode.hwcdc=Hardware CDC and JTAG
+cyobot_v2_esp32s3.menu.USBMode.hwcdc.build.usb_mode=1
+cyobot_v2_esp32s3.menu.USBMode.default=USB-OTG (TinyUSB)
+cyobot_v2_esp32s3.menu.USBMode.default.build.usb_mode=0
+
+cyobot_v2_esp32s3.menu.CDCOnBoot.default=Disabled
+cyobot_v2_esp32s3.menu.CDCOnBoot.default.build.cdc_on_boot=0
+cyobot_v2_esp32s3.menu.CDCOnBoot.cdc=Enabled
+cyobot_v2_esp32s3.menu.CDCOnBoot.cdc.build.cdc_on_boot=1
+
+cyobot_v2_esp32s3.menu.MSCOnBoot.default=Disabled
+cyobot_v2_esp32s3.menu.MSCOnBoot.default.build.msc_on_boot=0
+cyobot_v2_esp32s3.menu.MSCOnBoot.msc=Enabled (Requires USB-OTG Mode)
+cyobot_v2_esp32s3.menu.MSCOnBoot.msc.build.msc_on_boot=1
+
+cyobot_v2_esp32s3.menu.DFUOnBoot.default=Disabled
+cyobot_v2_esp32s3.menu.DFUOnBoot.default.build.dfu_on_boot=0
+cyobot_v2_esp32s3.menu.DFUOnBoot.dfu=Enabled (Requires USB-OTG Mode)
+cyobot_v2_esp32s3.menu.DFUOnBoot.dfu.build.dfu_on_boot=1
+
+cyobot_v2_esp32s3.menu.UploadMode.default=UART0 / Hardware CDC
+cyobot_v2_esp32s3.menu.UploadMode.default.upload.use_1200bps_touch=false
+cyobot_v2_esp32s3.menu.UploadMode.default.upload.wait_for_upload_port=false
+cyobot_v2_esp32s3.menu.UploadMode.cdc=USB-OTG CDC (TinyUSB)
+cyobot_v2_esp32s3.menu.UploadMode.cdc.upload.use_1200bps_touch=true
+cyobot_v2_esp32s3.menu.UploadMode.cdc.upload.wait_for_upload_port=true
+
+cyobot_v2_esp32s3.menu.PartitionScheme.default=Default 4MB with spiffs (1.2MB APP/1.5MB SPIFFS)
+cyobot_v2_esp32s3.menu.PartitionScheme.default.build.partitions=default
+cyobot_v2_esp32s3.menu.PartitionScheme.defaultffat=Default 4MB with ffat (1.2MB APP/1.5MB FATFS)
+cyobot_v2_esp32s3.menu.PartitionScheme.defaultffat.build.partitions=default_ffat
+cyobot_v2_esp32s3.menu.PartitionScheme.default_8MB=8M with spiffs (3MB APP/1.5MB SPIFFS)
+cyobot_v2_esp32s3.menu.PartitionScheme.default_8MB.build.partitions=default_8MB
+cyobot_v2_esp32s3.menu.PartitionScheme.default_8MB.upload.maximum_size=3342336
+cyobot_v2_esp32s3.menu.PartitionScheme.minimal=Minimal (1.3MB APP/700KB SPIFFS)
+cyobot_v2_esp32s3.menu.PartitionScheme.minimal.build.partitions=minimal
+cyobot_v2_esp32s3.menu.PartitionScheme.no_fs=No FS 4MB (2MB APP x2)
+cyobot_v2_esp32s3.menu.PartitionScheme.no_fs.build.partitions=no_fs
+cyobot_v2_esp32s3.menu.PartitionScheme.no_fs.upload.maximum_size=2031616
+cyobot_v2_esp32s3.menu.PartitionScheme.no_ota=No OTA (2MB APP/2MB SPIFFS)
+cyobot_v2_esp32s3.menu.PartitionScheme.no_ota.build.partitions=no_ota
+cyobot_v2_esp32s3.menu.PartitionScheme.no_ota.upload.maximum_size=2097152
+cyobot_v2_esp32s3.menu.PartitionScheme.noota_3g=No OTA (1MB APP/3MB SPIFFS)
+cyobot_v2_esp32s3.menu.PartitionScheme.noota_3g.build.partitions=noota_3g
+cyobot_v2_esp32s3.menu.PartitionScheme.noota_3g.upload.maximum_size=1048576
+cyobot_v2_esp32s3.menu.PartitionScheme.noota_ffat=No OTA (2MB APP/2MB FATFS)
+cyobot_v2_esp32s3.menu.PartitionScheme.noota_ffat.build.partitions=noota_ffat
+cyobot_v2_esp32s3.menu.PartitionScheme.noota_ffat.upload.maximum_size=2097152
+cyobot_v2_esp32s3.menu.PartitionScheme.noota_3gffat=No OTA (1MB APP/3MB FATFS)
+cyobot_v2_esp32s3.menu.PartitionScheme.noota_3gffat.build.partitions=noota_3gffat
+cyobot_v2_esp32s3.menu.PartitionScheme.noota_3gffat.upload.maximum_size=1048576
+cyobot_v2_esp32s3.menu.PartitionScheme.huge_app=Huge APP (3MB No OTA/1MB SPIFFS)
+cyobot_v2_esp32s3.menu.PartitionScheme.huge_app.build.partitions=huge_app
+cyobot_v2_esp32s3.menu.PartitionScheme.huge_app.upload.maximum_size=3145728
+cyobot_v2_esp32s3.menu.PartitionScheme.min_spiffs=Minimal SPIFFS (1.9MB APP with OTA/190KB SPIFFS)
+cyobot_v2_esp32s3.menu.PartitionScheme.min_spiffs.build.partitions=min_spiffs
+cyobot_v2_esp32s3.menu.PartitionScheme.min_spiffs.upload.maximum_size=1966080
+cyobot_v2_esp32s3.menu.PartitionScheme.fatflash=16M Flash (2MB APP/12.5MB FATFS)
+cyobot_v2_esp32s3.menu.PartitionScheme.fatflash.build.partitions=ffat
+cyobot_v2_esp32s3.menu.PartitionScheme.fatflash.upload.maximum_size=2097152
+cyobot_v2_esp32s3.menu.PartitionScheme.app3M_fat9M_16MB=16M Flash (3MB APP/9.9MB FATFS)
+cyobot_v2_esp32s3.menu.PartitionScheme.app3M_fat9M_16MB.build.partitions=app3M_fat9M_16MB
+cyobot_v2_esp32s3.menu.PartitionScheme.app3M_fat9M_16MB.upload.maximum_size=3145728
+cyobot_v2_esp32s3.menu.PartitionScheme.rainmaker=RainMaker 4MB
+cyobot_v2_esp32s3.menu.PartitionScheme.rainmaker.build.partitions=rainmaker
+cyobot_v2_esp32s3.menu.PartitionScheme.rainmaker.upload.maximum_size=1966080
+cyobot_v2_esp32s3.menu.PartitionScheme.rainmaker_4MB=RainMaker 4MB No OTA
+cyobot_v2_esp32s3.menu.PartitionScheme.rainmaker_4MB.build.partitions=rainmaker_4MB_no_ota
+cyobot_v2_esp32s3.menu.PartitionScheme.rainmaker_4MB.upload.maximum_size=4038656
+cyobot_v2_esp32s3.menu.PartitionScheme.rainmaker_8MB=RainMaker 8MB
+cyobot_v2_esp32s3.menu.PartitionScheme.rainmaker_8MB.build.partitions=rainmaker_8MB
+cyobot_v2_esp32s3.menu.PartitionScheme.rainmaker_8MB.upload.maximum_size=4116480
+cyobot_v2_esp32s3.menu.PartitionScheme.app5M_fat24M_32MB=32M Flash (4.8MB APP/22MB FATFS)
+cyobot_v2_esp32s3.menu.PartitionScheme.app5M_fat24M_32MB.build.partitions=large_fat_32MB
+cyobot_v2_esp32s3.menu.PartitionScheme.app5M_fat24M_32MB.upload.maximum_size=4718592
+cyobot_v2_esp32s3.menu.PartitionScheme.app5M_little24M_32MB=32M Flash (4.8MB APP/22MB LittleFS)
+cyobot_v2_esp32s3.menu.PartitionScheme.app5M_little24M_32MB.build.partitions=large_littlefs_32MB
+cyobot_v2_esp32s3.menu.PartitionScheme.app5M_little24M_32MB.upload.maximum_size=4718592
+cyobot_v2_esp32s3.menu.PartitionScheme.esp_sr_16=ESP SR 16M (3MB APP/7MB SPIFFS/2.9MB MODEL)
+cyobot_v2_esp32s3.menu.PartitionScheme.esp_sr_16.upload.maximum_size=3145728
+cyobot_v2_esp32s3.menu.PartitionScheme.esp_sr_16.upload.extra_flags=0xD10000 {build.path}/srmodels.bin
+cyobot_v2_esp32s3.menu.PartitionScheme.esp_sr_16.build.partitions=esp_sr_16
+cyobot_v2_esp32s3.menu.PartitionScheme.zigbee_zczr=Zigbee ZCZR 4MB with spiffs
+cyobot_v2_esp32s3.menu.PartitionScheme.zigbee_zczr.build.partitions=zigbee_zczr
+cyobot_v2_esp32s3.menu.PartitionScheme.zigbee_zczr.upload.maximum_size=1310720
+cyobot_v2_esp32s3.menu.PartitionScheme.custom=Custom
+cyobot_v2_esp32s3.menu.PartitionScheme.custom.build.partitions=
+cyobot_v2_esp32s3.menu.PartitionScheme.custom.upload.maximum_size=16777216
+
+cyobot_v2_esp32s3.menu.CPUFreq.240=240MHz (WiFi)
+cyobot_v2_esp32s3.menu.CPUFreq.240.build.f_cpu=240000000L
+cyobot_v2_esp32s3.menu.CPUFreq.160=160MHz (WiFi)
+cyobot_v2_esp32s3.menu.CPUFreq.160.build.f_cpu=160000000L
+cyobot_v2_esp32s3.menu.CPUFreq.80=80MHz (WiFi)
+cyobot_v2_esp32s3.menu.CPUFreq.80.build.f_cpu=80000000L
+cyobot_v2_esp32s3.menu.CPUFreq.40=40MHz
+cyobot_v2_esp32s3.menu.CPUFreq.40.build.f_cpu=40000000L
+cyobot_v2_esp32s3.menu.CPUFreq.20=20MHz
+cyobot_v2_esp32s3.menu.CPUFreq.20.build.f_cpu=20000000L
+cyobot_v2_esp32s3.menu.CPUFreq.10=10MHz
+cyobot_v2_esp32s3.menu.CPUFreq.10.build.f_cpu=10000000L
+
+cyobot_v2_esp32s3.menu.UploadSpeed.921600=921600
+cyobot_v2_esp32s3.menu.UploadSpeed.921600.upload.speed=921600
+cyobot_v2_esp32s3.menu.UploadSpeed.115200=115200
+cyobot_v2_esp32s3.menu.UploadSpeed.115200.upload.speed=115200
+cyobot_v2_esp32s3.menu.UploadSpeed.256000.windows=256000
+cyobot_v2_esp32s3.menu.UploadSpeed.256000.upload.speed=256000
+cyobot_v2_esp32s3.menu.UploadSpeed.230400.windows.upload.speed=256000
+cyobot_v2_esp32s3.menu.UploadSpeed.230400=230400
+cyobot_v2_esp32s3.menu.UploadSpeed.230400.upload.speed=230400
+cyobot_v2_esp32s3.menu.UploadSpeed.460800.linux=460800
+cyobot_v2_esp32s3.menu.UploadSpeed.460800.macosx=460800
+cyobot_v2_esp32s3.menu.UploadSpeed.460800.upload.speed=460800
+cyobot_v2_esp32s3.menu.UploadSpeed.512000.windows=512000
+cyobot_v2_esp32s3.menu.UploadSpeed.512000.upload.speed=512000
+
+cyobot_v2_esp32s3.menu.DebugLevel.none=None
+cyobot_v2_esp32s3.menu.DebugLevel.none.build.code_debug=0
+cyobot_v2_esp32s3.menu.DebugLevel.error=Error
+cyobot_v2_esp32s3.menu.DebugLevel.error.build.code_debug=1
+cyobot_v2_esp32s3.menu.DebugLevel.warn=Warn
+cyobot_v2_esp32s3.menu.DebugLevel.warn.build.code_debug=2
+cyobot_v2_esp32s3.menu.DebugLevel.info=Info
+cyobot_v2_esp32s3.menu.DebugLevel.info.build.code_debug=3
+cyobot_v2_esp32s3.menu.DebugLevel.debug=Debug
+cyobot_v2_esp32s3.menu.DebugLevel.debug.build.code_debug=4
+cyobot_v2_esp32s3.menu.DebugLevel.verbose=Verbose
+cyobot_v2_esp32s3.menu.DebugLevel.verbose.build.code_debug=5
+
+cyobot_v2_esp32s3.menu.EraseFlash.none=Disabled
+cyobot_v2_esp32s3.menu.EraseFlash.none.upload.erase_cmd=
+cyobot_v2_esp32s3.menu.EraseFlash.all=Enabled
+cyobot_v2_esp32s3.menu.EraseFlash.all.upload.erase_cmd=-e
+
+cyobot_v2_esp32s3.menu.ZigbeeMode.default=Disabled
+cyobot_v2_esp32s3.menu.ZigbeeMode.default.build.zigbee_mode=
+cyobot_v2_esp32s3.menu.ZigbeeMode.default.build.zigbee_libs=
+cyobot_v2_esp32s3.menu.ZigbeeMode.zczr=Zigbee ZCZR (coordinator/router)
+cyobot_v2_esp32s3.menu.ZigbeeMode.zczr.build.zigbee_mode=-DZIGBEE_MODE_ZCZR
+cyobot_v2_esp32s3.menu.ZigbeeMode.zczr.build.zigbee_libs=-lesp_zb_api.zczr -lzboss_stack.zczr -lzboss_port.remote
+
+##############################################################
diff --git a/cores/esp32/HardwareSerial.cpp b/cores/esp32/HardwareSerial.cpp
index fb93dad1c47..76135691411 100644
--- a/cores/esp32/HardwareSerial.cpp
+++ b/cores/esp32/HardwareSerial.cpp
@@ -11,52 +11,52 @@
 #include "driver/uart.h"
 #include "freertos/queue.h"
 
-#ifndef ARDUINO_SERIAL_EVENT_TASK_STACK_SIZE
-#define ARDUINO_SERIAL_EVENT_TASK_STACK_SIZE 2048
-#endif
-
-#ifndef ARDUINO_SERIAL_EVENT_TASK_PRIORITY
-#define ARDUINO_SERIAL_EVENT_TASK_PRIORITY (configMAX_PRIORITIES - 1)
-#endif
-
-#ifndef ARDUINO_SERIAL_EVENT_TASK_RUNNING_CORE
-#define ARDUINO_SERIAL_EVENT_TASK_RUNNING_CORE -1
+#if (SOC_UART_LP_NUM >= 1)
+#define UART_HW_FIFO_LEN(uart_num) ((uart_num < SOC_UART_HP_NUM) ? SOC_UART_FIFO_LEN : SOC_LP_UART_FIFO_LEN)
+#else
+#define UART_HW_FIFO_LEN(uart_num) SOC_UART_FIFO_LEN
 #endif
 
 void serialEvent(void) __attribute__((weak));
 
-#if SOC_UART_HP_NUM > 1
+#if SOC_UART_NUM > 1
 void serialEvent1(void) __attribute__((weak));
-#endif /* SOC_UART_HP_NUM > 1 */
+#endif /* SOC_UART_NUM > 1 */
 
-#if SOC_UART_HP_NUM > 2
+#if SOC_UART_NUM > 2
 void serialEvent2(void) __attribute__((weak));
-#endif /* SOC_UART_HP_NUM > 2 */
+#endif /* SOC_UART_NUM > 2 */
 
-#if SOC_UART_HP_NUM > 3
+#if SOC_UART_NUM > 3
 void serialEvent3(void) __attribute__((weak));
-#endif /* SOC_UART_HP_NUM > 3 */
+#endif /* SOC_UART_NUM > 3 */
 
-#if SOC_UART_HP_NUM > 4
+#if SOC_UART_NUM > 4
 void serialEvent4(void) __attribute__((weak));
-#endif /* SOC_UART_HP_NUM > 4 */
+#endif /* SOC_UART_NUM > 4 */
+
+#if SOC_UART_NUM > 5
+void serialEvent5(void) __attribute__((weak));
+#endif /* SOC_UART_NUM > 5 */
 
 #if !defined(NO_GLOBAL_INSTANCES) && !defined(NO_GLOBAL_SERIAL)
 // There is always Seria0 for UART0
 HardwareSerial Serial0(0);
-#if SOC_UART_HP_NUM > 1
+#if SOC_UART_NUM > 1
 HardwareSerial Serial1(1);
 #endif
-#if SOC_UART_HP_NUM > 2
+#if SOC_UART_NUM > 2
 HardwareSerial Serial2(2);
 #endif
-#if SOC_UART_HP_NUM > 3
+#if SOC_UART_NUM > 3
 HardwareSerial Serial3(3);
 #endif
-#if SOC_UART_HP_NUM > 4
+#if SOC_UART_NUM > 4
 HardwareSerial Serial4(4);
 #endif
-
+#if (SOC_UART_NUM > 5)
+HardwareSerial Serial5(5);
+#endif
 #if HWCDC_SERIAL_IS_DEFINED == 1  // Hardware JTAG CDC Event
 extern void HWCDCSerialEvent(void) __attribute__((weak));
 #endif
@@ -81,26 +81,31 @@ void serialEventRun(void) {
   if (serialEvent && Serial0.available()) {
     serialEvent();
   }
-#if SOC_UART_HP_NUM > 1
+#if SOC_UART_NUM > 1
   if (serialEvent1 && Serial1.available()) {
     serialEvent1();
   }
 #endif
-#if SOC_UART_HP_NUM > 2
+#if SOC_UART_NUM > 2
   if (serialEvent2 && Serial2.available()) {
     serialEvent2();
   }
 #endif
-#if SOC_UART_HP_NUM > 3
+#if SOC_UART_NUM > 3
   if (serialEvent3 && Serial3.available()) {
     serialEvent3();
   }
 #endif
-#if SOC_UART_HP_NUM > 4
+#if SOC_UART_NUM > 4
   if (serialEvent4 && Serial4.available()) {
     serialEvent4();
   }
 #endif
+#if SOC_UART_NUM > 5
+  if (serialEvent5 && Serial5.available()) {
+    serialEvent5();
+  }
+#endif
 }
 #endif
 
@@ -185,7 +190,8 @@ void HardwareSerial::onReceive(OnReceiveCb function, bool onlyOnTimeout) {
 
     // in case that onReceive() shall work only with RX Timeout, FIFO shall be high
     // this is a work around for an IDF issue with events and low FIFO Full value (< 3)
-    if (_onReceiveTimeout) {
+    // Not valid for the LP UART
+    if (_onReceiveTimeout && _uart_nr < SOC_UART_HP_NUM) {
       uartSetRxFIFOFull(_uart, 120);
       log_w("OnReceive is set to Timeout only, thus FIFO Full is now 120 bytes.");
     }
@@ -207,12 +213,13 @@ bool HardwareSerial::setRxFIFOFull(uint8_t fifoBytes) {
   HSERIAL_MUTEX_LOCK();
   // in case that onReceive() shall work only with RX Timeout, FIFO shall be high
   // this is a work around for an IDF issue with events and low FIFO Full value (< 3)
-  if (_onReceiveCB != NULL && _onReceiveTimeout) {
+  // Not valid for the LP UART
+  if (_onReceiveCB != NULL && _onReceiveTimeout && _uart_nr < SOC_UART_HP_NUM) {
     fifoBytes = 120;
     log_w("OnReceive is set to Timeout only, thus FIFO Full is now 120 bytes.");
   }
   bool retCode = uartSetRxFIFOFull(_uart, fifoBytes);  // Set new timeout
-  if (fifoBytes > 0 && fifoBytes < SOC_UART_FIFO_LEN - 1) {
+  if (fifoBytes > 0 && fifoBytes < UART_HW_FIFO_LEN(_uart_nr) - 1) {
     _rxFIFOFull = fifoBytes;
   }
   HSERIAL_MUTEX_UNLOCK();
@@ -298,8 +305,8 @@ void HardwareSerial::_uartEventTask(void *args) {
 }
 
 void HardwareSerial::begin(unsigned long baud, uint32_t config, int8_t rxPin, int8_t txPin, bool invert, unsigned long timeout_ms, uint8_t rxfifo_full_thrhd) {
-  if (_uart_nr >= SOC_UART_HP_NUM) {
-    log_e("Serial number is invalid, please use a number from 0 to %u", SOC_UART_HP_NUM - 1);
+  if (_uart_nr >= SOC_UART_NUM) {
+    log_e("Serial number is invalid, please use a number from 0 to %u", SOC_UART_NUM - 1);
     return;
   }
 
@@ -333,7 +340,7 @@ void HardwareSerial::begin(unsigned long baud, uint32_t config, int8_t rxPin, in
           txPin = _txPin < 0 ? (int8_t)SOC_TX0 : _txPin;
         }
         break;
-#if SOC_UART_HP_NUM > 1  // may save some flash bytes...
+#if SOC_UART_HP_NUM > 1
       case UART_NUM_1:
         if (rxPin < 0 && txPin < 0) {
           // do not change RX1/TX1 if it has already been set before
@@ -341,8 +348,8 @@ void HardwareSerial::begin(unsigned long baud, uint32_t config, int8_t rxPin, in
           txPin = _txPin < 0 ? (int8_t)TX1 : _txPin;
         }
         break;
-#endif
-#if SOC_UART_HP_NUM > 2  // may save some flash bytes...
+#endif  // UART_NUM_1
+#if SOC_UART_HP_NUM > 2
       case UART_NUM_2:
         if (rxPin < 0 && txPin < 0) {
           // do not change RX2/TX2 if it has already been set before
@@ -354,11 +361,11 @@ void HardwareSerial::begin(unsigned long baud, uint32_t config, int8_t rxPin, in
 #endif
         }
         break;
-#endif
-#if SOC_UART_HP_NUM > 3  // may save some flash bytes...
+#endif  // UART_NUM_2
+#if SOC_UART_HP_NUM > 3
       case UART_NUM_3:
         if (rxPin < 0 && txPin < 0) {
-          // do not change RX2/TX2 if it has already been set before
+          // do not change RX3/TX3 if it has already been set before
 #ifdef RX3
           rxPin = _rxPin < 0 ? (int8_t)RX3 : _rxPin;
 #endif
@@ -367,11 +374,11 @@ void HardwareSerial::begin(unsigned long baud, uint32_t config, int8_t rxPin, in
 #endif
         }
         break;
-#endif
-#if SOC_UART_HP_NUM > 4  // may save some flash bytes...
+#endif  // UART_NUM_3
+#if SOC_UART_HP_NUM > 4
       case UART_NUM_4:
         if (rxPin < 0 && txPin < 0) {
-          // do not change RX2/TX2 if it has already been set before
+          // do not change RX4/TX4 if it has already been set before
 #ifdef RX4
           rxPin = _rxPin < 0 ? (int8_t)RX4 : _rxPin;
 #endif
@@ -380,7 +387,20 @@ void HardwareSerial::begin(unsigned long baud, uint32_t config, int8_t rxPin, in
 #endif
         }
         break;
+#endif  // UART_NUM_4
+#if (SOC_UART_LP_NUM >= 1)
+      case LP_UART_NUM_0:
+        if (rxPin < 0 && txPin < 0) {
+          // do not change RX0_LP/TX0_LP if it has already been set before
+#ifdef LP_RX0
+          rxPin = _rxPin < 0 ? (int8_t)LP_RX0 : _rxPin;
+#endif
+#ifdef LP_TX0
+          txPin = _txPin < 0 ? (int8_t)LP_TX0 : _txPin;
 #endif
+        }
+        break;
+#endif  // LP_UART_NUM_0
     }
   }
 
@@ -445,7 +465,8 @@ void HardwareSerial::begin(unsigned long baud, uint32_t config, int8_t rxPin, in
   if (!_rxFIFOFull) {  // it has not being changed before calling begin()
     //  set a default FIFO Full value for the IDF driver
     uint8_t fifoFull = 1;
-    if (baud > 57600 || (_onReceiveCB != NULL && _onReceiveTimeout)) {
+    // if baud rate is higher than 57600 or onReceive() is set, it will set FIFO Full to 120 bytes, except for LP UART
+    if (_uart_nr < SOC_UART_HP_NUM && (baud > 57600 || (_onReceiveCB != NULL && _onReceiveTimeout))) {
       fifoFull = 120;
     }
     uartSetRxFIFOFull(_uart, fifoFull);
@@ -477,6 +498,12 @@ void HardwareSerial::setDebugOutput(bool en) {
   if (_uart == 0) {
     return;
   }
+#if (SOC_UART_LP_NUM >= 1)
+  if (_uart_nr >= SOC_UART_HP_NUM) {
+    log_e("LP UART does not support Debug Output.");
+    return;
+  }
+#endif
   if (en) {
     uartSetDebug(_uart);
   } else {
@@ -581,34 +608,37 @@ bool HardwareSerial::setMode(SerialMode mode) {
 }
 
 // minimum total RX Buffer size is the UART FIFO space (128 bytes for most SoC) + 1. IDF imposition.
+// LP UART has FIFO of 16 bytes
 size_t HardwareSerial::setRxBufferSize(size_t new_size) {
 
   if (_uart) {
     log_e("RX Buffer can't be resized when Serial is already running. Set it before calling begin().");
     return 0;
   }
-
-  if (new_size <= SOC_UART_FIFO_LEN) {
-    log_w("RX Buffer set to minimum value: %d.", SOC_UART_FIFO_LEN + 1);  // ESP32, S2, S3 and C3 means higher than 128
-    new_size = SOC_UART_FIFO_LEN + 1;
+  uint8_t FIFOLen = UART_HW_FIFO_LEN(_uart_nr);
+  // Valid value is higher than the FIFO length
+  if (new_size <= FIFOLen) {
+    new_size = FIFOLen + 1;
+    log_w("RX Buffer set to minimum value: %d.", new_size);
   }
 
   _rxBufferSize = new_size;
   return _rxBufferSize;
 }
 
-// minimum total TX Buffer size is the UART FIFO space (128 bytes for most SoC).
+// minimum total TX Buffer size is the UART FIFO space (128 bytes for most SoC) + 1.
+// LP UART has FIFO of 16 bytes
 size_t HardwareSerial::setTxBufferSize(size_t new_size) {
 
   if (_uart) {
     log_e("TX Buffer can't be resized when Serial is already running. Set it before calling begin().");
     return 0;
   }
-
-  if (new_size <= SOC_UART_FIFO_LEN) {
-    log_w("TX Buffer set to minimum value: %d.", SOC_UART_FIFO_LEN);  // ESP32, S2, S3 and C3 means higher than 128
-    _txBufferSize = 0;                                                // it will use just UART FIFO with SOC_UART_FIFO_LEN bytes (128 for most SoC)
-    return SOC_UART_FIFO_LEN;
+  uint8_t FIFOLen = UART_HW_FIFO_LEN(_uart_nr);
+  // Valid values are zero or higher than the FIFO length
+  if (new_size > 0 && new_size <= FIFOLen) {
+    new_size = FIFOLen + 1;
+    log_w("TX Buffer set to minimum value: %d.", new_size);
   }
   // if new_size is higher than SOC_UART_FIFO_LEN, TX Ringbuffer will be active and it will be used to report back "availableToWrite()"
   _txBufferSize = new_size;
diff --git a/cores/esp32/HardwareSerial.h b/cores/esp32/HardwareSerial.h
index a33d5def34d..b1f6df17724 100644
--- a/cores/esp32/HardwareSerial.h
+++ b/cores/esp32/HardwareSerial.h
@@ -97,15 +97,27 @@ typedef enum {
 } hardwareSerial_error_t;
 
 #ifndef ARDUINO_SERIAL_EVENT_TASK_STACK_SIZE
+#ifndef CONFIG_ARDUINO_SERIAL_EVENT_TASK_STACK_SIZE
 #define ARDUINO_SERIAL_EVENT_TASK_STACK_SIZE 2048
+#else
+#define ARDUINO_SERIAL_EVENT_TASK_STACK_SIZE CONFIG_ARDUINO_SERIAL_EVENT_TASK_STACK_SIZE
+#endif
 #endif
 
 #ifndef ARDUINO_SERIAL_EVENT_TASK_PRIORITY
+#ifndef CONFIG_ARDUINO_SERIAL_EVENT_TASK_PRIORITY
 #define ARDUINO_SERIAL_EVENT_TASK_PRIORITY (configMAX_PRIORITIES - 1)
+#else
+#define ARDUINO_SERIAL_EVENT_TASK_PRIORITY CONFIG_ARDUINO_SERIAL_EVENT_TASK_PRIORITY
+#endif
 #endif
 
 #ifndef ARDUINO_SERIAL_EVENT_TASK_RUNNING_CORE
+#ifndef CONFIG_ARDUINO_SERIAL_EVENT_TASK_RUNNING_CORE
 #define ARDUINO_SERIAL_EVENT_TASK_RUNNING_CORE -1
+#else
+#define ARDUINO_SERIAL_EVENT_TASK_RUNNING_CORE CONFIG_ARDUINO_SERIAL_EVENT_TASK_RUNNING_CORE
+#endif
 #endif
 
 // UART0 pins are defined by default by the bootloader.
@@ -212,6 +224,16 @@ typedef enum {
 #endif
 #endif /* SOC_UART_HP_NUM > 2 */
 
+#if SOC_UART_LP_NUM >= 1
+#ifndef LP_RX0
+#define LP_RX0 (gpio_num_t) LP_U0RXD_GPIO_NUM
+#endif
+
+#ifndef LP_TX0
+#define LP_TX0 (gpio_num_t) LP_U0TXD_GPIO_NUM
+#endif
+#endif /* SOC_UART_LP_NUM >= 1 */
+
 typedef std::function<void(void)> OnReceiveCb;
 typedef std::function<void(hardwareSerial_error_t)> OnReceiveErrorCb;
 
@@ -259,7 +281,7 @@ class HardwareSerial : public Stream {
   // rxfifo_full_thrhd if the UART Flow Control Threshold in the UART FIFO (max 127)
   void begin(
     unsigned long baud, uint32_t config = SERIAL_8N1, int8_t rxPin = -1, int8_t txPin = -1, bool invert = false, unsigned long timeout_ms = 20000UL,
-    uint8_t rxfifo_full_thrhd = 112
+    uint8_t rxfifo_full_thrhd = 120
   );
   void end(void);
   void updateBaudRate(unsigned long baud);
@@ -365,18 +387,21 @@ extern void serialEventRun(void) __attribute__((weak));
 #endif  // ARDUINO_USB_CDC_ON_BOOT
 // There is always Seria0 for UART0
 extern HardwareSerial Serial0;
-#if SOC_UART_HP_NUM > 1
+#if SOC_UART_NUM > 1
 extern HardwareSerial Serial1;
 #endif
-#if SOC_UART_HP_NUM > 2
+#if SOC_UART_NUM > 2
 extern HardwareSerial Serial2;
 #endif
-#if SOC_UART_HP_NUM > 3
+#if SOC_UART_NUM > 3
 extern HardwareSerial Serial3;
 #endif
-#if SOC_UART_HP_NUM > 4
+#if SOC_UART_NUM > 4
 extern HardwareSerial Serial4;
 #endif
+#if SOC_UART_NUM > 5
+extern HardwareSerial Serial5;
+#endif
 #endif  //!defined(NO_GLOBAL_INSTANCES) && !defined(NO_GLOBAL_SERIAL)
 
 #endif  // HardwareSerial_h
diff --git a/cores/esp32/esp32-hal-gpio.c b/cores/esp32/esp32-hal-gpio.c
index b11636daf81..c681be077b3 100644
--- a/cores/esp32/esp32-hal-gpio.c
+++ b/cores/esp32/esp32-hal-gpio.c
@@ -173,7 +173,7 @@ extern void ARDUINO_ISR_ATTR __digitalWrite(uint8_t pin, uint8_t val) {
   if (perimanGetPinBus(pin, ESP32_BUS_TYPE_GPIO) != NULL) {
     gpio_set_level((gpio_num_t)pin, val);
   } else {
-    log_e("IO %i is not set as GPIO.", pin);
+    log_e("IO %i is not set as GPIO. Execute digitalMode(%i, OUTPUT) first.", pin, pin);
   }
 }
 
@@ -182,14 +182,12 @@ extern int ARDUINO_ISR_ATTR __digitalRead(uint8_t pin) {
   if (pin == RGB_BUILTIN) {
     return RGB_BUILTIN_storage;
   }
-#endif
-
-  if (perimanGetPinBus(pin, ESP32_BUS_TYPE_GPIO) != NULL) {
-    return gpio_get_level((gpio_num_t)pin);
-  } else {
-    log_e("IO %i is not set as GPIO.", pin);
-    return 0;
+#endif  // RGB_BUILTIN
+  // This work when the pin is set as GPIO and in INPUT mode. For all other pin functions, it may return inconsistent response
+  if (perimanGetPinBus(pin, ESP32_BUS_TYPE_GPIO) == NULL) {
+    log_w("IO %i is not set as GPIO. digitalRead() may return an inconsistent value.");
   }
+  return gpio_get_level((gpio_num_t)pin);
 }
 
 static void ARDUINO_ISR_ATTR __onPinInterrupt(void *arg) {
diff --git a/cores/esp32/esp32-hal-i2c-ng.c b/cores/esp32/esp32-hal-i2c-ng.c
new file mode 100644
index 00000000000..8e48d0e0397
--- /dev/null
+++ b/cores/esp32/esp32-hal-i2c-ng.c
@@ -0,0 +1,445 @@
+// Copyright 2015-2025 Espressif Systems (Shanghai) PTE LTD
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+#include "esp32-hal-i2c.h"
+
+#if SOC_I2C_SUPPORTED
+#include "esp_idf_version.h"
+#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 4, 0)
+#include "esp32-hal.h"
+#if !CONFIG_DISABLE_HAL_LOCKS
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "freertos/semphr.h"
+#endif
+#include "esp_attr.h"
+#include "esp_system.h"
+#include "soc/soc_caps.h"
+#include "driver/i2c_master.h"
+#include "esp32-hal-periman.h"
+
+typedef volatile struct {
+  bool initialized;
+  uint32_t frequency;
+#if !CONFIG_DISABLE_HAL_LOCKS
+  SemaphoreHandle_t lock;
+#endif
+  int8_t scl;
+  int8_t sda;
+  i2c_master_bus_handle_t bus_handle;
+  i2c_master_dev_handle_t dev_handles[128];
+} i2c_bus_t;
+
+static i2c_bus_t bus[SOC_I2C_NUM];
+
+static bool i2cDetachBus(void *bus_i2c_num) {
+  uint8_t i2c_num = (int)bus_i2c_num - 1;
+  if (!bus[i2c_num].initialized) {
+    return true;
+  }
+  esp_err_t err = i2cDeinit(i2c_num);
+  if (err != ESP_OK) {
+    log_e("i2cDeinit failed with error: %d", err);
+    return false;
+  }
+  return true;
+}
+
+bool i2cIsInit(uint8_t i2c_num) {
+  if (i2c_num >= SOC_I2C_NUM) {
+    return false;
+  }
+  return bus[i2c_num].initialized;
+}
+
+esp_err_t i2cInit(uint8_t i2c_num, int8_t sda, int8_t scl, uint32_t frequency) {
+  esp_err_t ret = ESP_OK;
+  if (i2c_num >= SOC_I2C_NUM) {
+    return ESP_ERR_INVALID_ARG;
+  }
+#if !CONFIG_DISABLE_HAL_LOCKS
+  if (bus[i2c_num].lock == NULL) {
+    bus[i2c_num].lock = xSemaphoreCreateMutex();
+    if (bus[i2c_num].lock == NULL) {
+      log_e("xSemaphoreCreateMutex failed");
+      return ESP_ERR_NO_MEM;
+    }
+  }
+  //acquire lock
+  if (xSemaphoreTake(bus[i2c_num].lock, portMAX_DELAY) != pdTRUE) {
+    log_e("could not acquire lock");
+    return ESP_FAIL;
+  }
+#endif
+  if (bus[i2c_num].initialized) {
+    log_e("bus is already initialized");
+    ret = ESP_FAIL;
+    goto init_fail;
+  }
+
+  if (!frequency) {
+    frequency = 100000UL;
+  } else if (frequency > 1000000UL) {
+    frequency = 1000000UL;
+  }
+
+  perimanSetBusDeinit(ESP32_BUS_TYPE_I2C_MASTER_SDA, i2cDetachBus);
+  perimanSetBusDeinit(ESP32_BUS_TYPE_I2C_MASTER_SCL, i2cDetachBus);
+
+  if (!perimanClearPinBus(sda) || !perimanClearPinBus(scl)) {
+    ret = ESP_FAIL;
+    goto init_fail;
+  }
+
+  log_i("Initializing I2C Master: num=%u sda=%d scl=%d freq=%lu", i2c_num, sda, scl, frequency);
+
+  i2c_master_bus_handle_t bus_handle = NULL;
+  i2c_master_bus_config_t bus_config;
+  memset(&bus_config, 0, sizeof(i2c_master_bus_config_t));
+  bus_config.i2c_port = (i2c_port_num_t)i2c_num;
+  bus_config.sda_io_num = (gpio_num_t)sda;
+  bus_config.scl_io_num = (gpio_num_t)scl;
+#if SOC_LP_I2C_SUPPORTED
+  if (i2c_num >= SOC_HP_I2C_NUM) {
+    bus_config.lp_source_clk = LP_I2C_SCLK_DEFAULT;
+  } else
+#endif
+  {
+    bus_config.clk_source = I2C_CLK_SRC_DEFAULT;
+  }
+  bus_config.glitch_ignore_cnt = 7;
+  bus_config.intr_priority = 0;      // auto
+  bus_config.trans_queue_depth = 0;  // only valid in asynchronous transaction, which Arduino does not use
+  bus_config.flags.enable_internal_pullup = 1;
+#if SOC_I2C_SUPPORT_SLEEP_RETENTION
+  bus_config.flags.allow_pd = 1;  // backup/restore the I2C registers before/after entering/exist sleep mode
+#endif
+
+  ret = i2c_new_master_bus(&bus_config, &bus_handle);
+  if (ret != ESP_OK) {
+    log_e("i2c_new_master_bus failed: [%d] %s", ret, esp_err_to_name(ret));
+  } else {
+    bus[i2c_num].initialized = true;
+    bus[i2c_num].frequency = frequency;
+    bus[i2c_num].scl = scl;
+    bus[i2c_num].sda = sda;
+    bus[i2c_num].bus_handle = bus_handle;
+    for (uint8_t i = 0; i < 128; i++) {
+      bus[i2c_num].dev_handles[i] = NULL;
+    }
+    if (!perimanSetPinBus(sda, ESP32_BUS_TYPE_I2C_MASTER_SDA, (void *)(i2c_num + 1), i2c_num, -1)
+        || !perimanSetPinBus(scl, ESP32_BUS_TYPE_I2C_MASTER_SCL, (void *)(i2c_num + 1), i2c_num, -1)) {
+#if !CONFIG_DISABLE_HAL_LOCKS
+      //release lock so that i2cDetachBus can execute i2cDeinit
+      xSemaphoreGive(bus[i2c_num].lock);
+#endif
+      i2cDetachBus((void *)(i2c_num + 1));
+      return ESP_FAIL;
+    }
+  }
+
+init_fail:
+#if !CONFIG_DISABLE_HAL_LOCKS
+  //release lock
+  xSemaphoreGive(bus[i2c_num].lock);
+#endif
+  return ret;
+}
+
+esp_err_t i2cDeinit(uint8_t i2c_num) {
+  esp_err_t err = ESP_FAIL;
+  if (i2c_num >= SOC_I2C_NUM) {
+    return ESP_ERR_INVALID_ARG;
+  }
+#if !CONFIG_DISABLE_HAL_LOCKS
+  //acquire lock
+  if (bus[i2c_num].lock == NULL || xSemaphoreTake(bus[i2c_num].lock, portMAX_DELAY) != pdTRUE) {
+    log_e("could not acquire lock");
+    return err;
+  }
+#endif
+  if (!bus[i2c_num].initialized) {
+    log_e("bus is not initialized");
+  } else {
+    // remove devices from the bus
+    for (uint8_t i = 0; i < 128; i++) {
+      if (bus[i2c_num].dev_handles[i] != NULL) {
+        err = i2c_master_bus_rm_device(bus[i2c_num].dev_handles[i]);
+        bus[i2c_num].dev_handles[i] = NULL;
+        if (err != ESP_OK) {
+          log_e("i2c_master_bus_rm_device failed: [%d] %s", err, esp_err_to_name(err));
+        }
+      }
+    }
+    err = i2c_del_master_bus(bus[i2c_num].bus_handle);
+    if (err != ESP_OK) {
+      log_e("i2c_del_master_bus failed: [%d] %s", err, esp_err_to_name(err));
+    } else {
+      bus[i2c_num].initialized = false;
+      perimanClearPinBus(bus[i2c_num].scl);
+      perimanClearPinBus(bus[i2c_num].sda);
+      bus[i2c_num].scl = -1;
+      bus[i2c_num].sda = -1;
+      bus[i2c_num].bus_handle = NULL;
+    }
+  }
+#if !CONFIG_DISABLE_HAL_LOCKS
+  //release lock
+  xSemaphoreGive(bus[i2c_num].lock);
+#endif
+  return err;
+}
+
+static esp_err_t i2cAddDeviceIfNeeded(uint8_t i2c_num, uint16_t address) {
+  esp_err_t ret = ESP_OK;
+  if (bus[i2c_num].dev_handles[address] == NULL) {
+    i2c_master_dev_handle_t dev_handle = NULL;
+    i2c_device_config_t dev_config;
+    memset(&dev_config, 0, sizeof(i2c_device_config_t));
+    dev_config.dev_addr_length = I2C_ADDR_BIT_LEN_7;  // Arduino supports only 7bit addresses
+    dev_config.device_address = address;
+    dev_config.scl_speed_hz = bus[i2c_num].frequency;
+    dev_config.scl_wait_us = 0;
+    dev_config.flags.disable_ack_check = 0;
+
+    ret = i2c_master_bus_add_device(bus[i2c_num].bus_handle, &dev_config, &dev_handle);
+    if (ret != ESP_OK) {
+      log_e("i2c_master_bus_add_device failed: [%d] %s", ret, esp_err_to_name(ret));
+    } else {
+      bus[i2c_num].dev_handles[address] = dev_handle;
+      log_v("added device: bus=%u addr=0x%x handle=0x%08x", i2c_num, address, dev_handle);
+    }
+  }
+  return ret;
+}
+
+esp_err_t i2cWrite(uint8_t i2c_num, uint16_t address, const uint8_t *buff, size_t size, uint32_t timeOutMillis) {
+  esp_err_t ret = ESP_FAIL;
+  // i2c_cmd_handle_t cmd = NULL;
+  if (i2c_num >= SOC_I2C_NUM) {
+    return ESP_ERR_INVALID_ARG;
+  }
+  if (address >= 128) {
+    log_e("Only 7bit I2C addresses are supported");
+    return ESP_ERR_INVALID_ARG;
+  }
+#if !CONFIG_DISABLE_HAL_LOCKS
+  //acquire lock
+  if (bus[i2c_num].lock == NULL || xSemaphoreTake(bus[i2c_num].lock, portMAX_DELAY) != pdTRUE) {
+    log_e("could not acquire lock");
+    return ret;
+  }
+#endif
+  if (!bus[i2c_num].initialized) {
+    log_e("bus is not initialized");
+    goto end;
+  }
+
+  if (size == 0) {
+    // Probe device
+    ret = i2c_master_probe(bus[i2c_num].bus_handle, address, timeOutMillis);
+    if (ret != ESP_OK) {
+      log_v("i2c_master_probe failed: [%d] %s", ret, esp_err_to_name(ret));
+    }
+  } else {
+    // writing data to device
+    ret = i2cAddDeviceIfNeeded(i2c_num, address);
+    if (ret != ESP_OK) {
+      goto end;
+    }
+
+    log_v("i2c_master_transmit: bus=%u addr=0x%x handle=0x%08x size=%u", i2c_num, address, bus[i2c_num].dev_handles[address], size);
+    ret = i2c_master_transmit(bus[i2c_num].dev_handles[address], buff, size, timeOutMillis);
+    if (ret != ESP_OK) {
+      log_e("i2c_master_transmit failed: [%d] %s", ret, esp_err_to_name(ret));
+      goto end;
+    }
+
+    // wait for transactions to finish (is it needed with sync transactions?)
+    // ret = i2c_master_bus_wait_all_done(bus[i2c_num].bus_handle, timeOutMillis);
+    // if (ret != ESP_OK) {
+    //   log_e("i2c_master_bus_wait_all_done failed: [%d] %s", ret, esp_err_to_name(ret));
+    //   goto end;
+    // }
+  }
+
+end:
+#if !CONFIG_DISABLE_HAL_LOCKS
+  //release lock
+  xSemaphoreGive(bus[i2c_num].lock);
+#endif
+  return ret;
+}
+
+esp_err_t i2cRead(uint8_t i2c_num, uint16_t address, uint8_t *buff, size_t size, uint32_t timeOutMillis, size_t *readCount) {
+  esp_err_t ret = ESP_FAIL;
+  *readCount = 0;
+  if (i2c_num >= SOC_I2C_NUM) {
+    return ESP_ERR_INVALID_ARG;
+  }
+#if !CONFIG_DISABLE_HAL_LOCKS
+  //acquire lock
+  if (bus[i2c_num].lock == NULL || xSemaphoreTake(bus[i2c_num].lock, portMAX_DELAY) != pdTRUE) {
+    log_e("could not acquire lock");
+    return ret;
+  }
+#endif
+  if (!bus[i2c_num].initialized) {
+    log_e("bus is not initialized");
+    goto end;
+  }
+
+  ret = i2cAddDeviceIfNeeded(i2c_num, address);
+  if (ret != ESP_OK) {
+    goto end;
+  }
+
+  log_v("i2c_master_receive: bus=%u addr=0x%x handle=0x%08x size=%u", i2c_num, address, bus[i2c_num].dev_handles[address], size);
+  ret = i2c_master_receive(bus[i2c_num].dev_handles[address], buff, size, timeOutMillis);
+  if (ret != ESP_OK) {
+    log_e("i2c_master_receive failed: [%d] %s", ret, esp_err_to_name(ret));
+    goto end;
+  }
+
+  // wait for transactions to finish (is it needed with sync transactions?)
+  // ret = i2c_master_bus_wait_all_done(bus[i2c_num].bus_handle, timeOutMillis);
+  // if (ret != ESP_OK) {
+  //   log_e("i2c_master_bus_wait_all_done failed: [%d] %s", ret, esp_err_to_name(ret));
+  //   goto end;
+  // }
+  *readCount = size;
+
+end:
+#if !CONFIG_DISABLE_HAL_LOCKS
+  //release lock
+  xSemaphoreGive(bus[i2c_num].lock);
+#endif
+  return ret;
+}
+
+esp_err_t i2cWriteReadNonStop(
+  uint8_t i2c_num, uint16_t address, const uint8_t *wbuff, size_t wsize, uint8_t *rbuff, size_t rsize, uint32_t timeOutMillis, size_t *readCount
+) {
+  esp_err_t ret = ESP_FAIL;
+  *readCount = 0;
+  if (i2c_num >= SOC_I2C_NUM) {
+    return ESP_ERR_INVALID_ARG;
+  }
+#if !CONFIG_DISABLE_HAL_LOCKS
+  //acquire lock
+  if (bus[i2c_num].lock == NULL || xSemaphoreTake(bus[i2c_num].lock, portMAX_DELAY) != pdTRUE) {
+    log_e("could not acquire lock");
+    return ret;
+  }
+#endif
+  if (!bus[i2c_num].initialized) {
+    log_e("bus is not initialized");
+    goto end;
+  }
+
+  ret = i2cAddDeviceIfNeeded(i2c_num, address);
+  if (ret != ESP_OK) {
+    goto end;
+  }
+
+  log_v("i2c_master_transmit_receive: bus=%u addr=0x%x handle=0x%08x write=%u read=%u", i2c_num, address, bus[i2c_num].dev_handles[address], wsize, rsize);
+  ret = i2c_master_transmit_receive(bus[i2c_num].dev_handles[address], wbuff, wsize, rbuff, rsize, timeOutMillis);
+  if (ret != ESP_OK) {
+    log_e("i2c_master_transmit_receive failed: [%d] %s", ret, esp_err_to_name(ret));
+    goto end;
+  }
+
+  // wait for transactions to finish (is it needed with sync transactions?)
+  // ret = i2c_master_bus_wait_all_done(bus[i2c_num].bus_handle, timeOutMillis);
+  // if (ret != ESP_OK) {
+  //   log_e("i2c_master_bus_wait_all_done failed: [%d] %s", ret, esp_err_to_name(ret));
+  //   goto end;
+  // }
+  *readCount = rsize;
+
+end:
+#if !CONFIG_DISABLE_HAL_LOCKS
+  //release lock
+  xSemaphoreGive(bus[i2c_num].lock);
+#endif
+  return ret;
+}
+
+esp_err_t i2cSetClock(uint8_t i2c_num, uint32_t frequency) {
+  esp_err_t ret = ESP_FAIL;
+  if (i2c_num >= SOC_I2C_NUM) {
+    return ESP_ERR_INVALID_ARG;
+  }
+#if !CONFIG_DISABLE_HAL_LOCKS
+  //acquire lock
+  if (bus[i2c_num].lock == NULL || xSemaphoreTake(bus[i2c_num].lock, portMAX_DELAY) != pdTRUE) {
+    log_e("could not acquire lock");
+    return ret;
+  }
+#endif
+  if (!bus[i2c_num].initialized) {
+    log_e("bus is not initialized");
+    goto end;
+  }
+  if (bus[i2c_num].frequency == frequency) {
+    ret = ESP_OK;
+    goto end;
+  }
+  if (!frequency) {
+    frequency = 100000UL;
+  } else if (frequency > 1000000UL) {
+    frequency = 1000000UL;
+  }
+
+  bus[i2c_num].frequency = frequency;
+
+  // loop through devices, remove them and then re-add them with the new frequency
+  for (uint8_t i = 0; i < 128; i++) {
+    if (bus[i2c_num].dev_handles[i] != NULL) {
+      ret = i2c_master_bus_rm_device(bus[i2c_num].dev_handles[i]);
+      if (ret != ESP_OK) {
+        log_e("i2c_master_bus_rm_device failed: [%d] %s", ret, esp_err_to_name(ret));
+        goto end;
+      } else {
+        bus[i2c_num].dev_handles[i] = NULL;
+        ret = i2cAddDeviceIfNeeded(i2c_num, i);
+        if (ret != ESP_OK) {
+          goto end;
+        }
+      }
+    }
+  }
+
+end:
+#if !CONFIG_DISABLE_HAL_LOCKS
+  //release lock
+  xSemaphoreGive(bus[i2c_num].lock);
+#endif
+  return ret;
+}
+
+esp_err_t i2cGetClock(uint8_t i2c_num, uint32_t *frequency) {
+  if (i2c_num >= SOC_I2C_NUM) {
+    return ESP_ERR_INVALID_ARG;
+  }
+  if (!bus[i2c_num].initialized) {
+    log_e("bus is not initialized");
+    return ESP_FAIL;
+  }
+  *frequency = bus[i2c_num].frequency;
+  return ESP_OK;
+}
+
+#endif /* ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 4, 0) */
+#endif /* SOC_I2C_SUPPORTED */
diff --git a/cores/esp32/esp32-hal-i2c-slave.c b/cores/esp32/esp32-hal-i2c-slave.c
index 85eddcdfcf4..46c3a4d58c2 100644
--- a/cores/esp32/esp32-hal-i2c-slave.c
+++ b/cores/esp32/esp32-hal-i2c-slave.c
@@ -336,7 +336,11 @@ esp_err_t i2cSlaveInit(uint8_t num, int sda, int scl, uint16_t slaveID, uint32_t
 #endif  // !defined(CONFIG_IDF_TARGET_ESP32P4)
 
   i2c_ll_slave_init(i2c->dev);
+#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 4, 0)
+  i2c_ll_enable_fifo_mode(i2c->dev, true);
+#else
   i2c_ll_slave_set_fifo_mode(i2c->dev, true);
+#endif
   i2c_ll_set_slave_addr(i2c->dev, slaveID, false);
   i2c_ll_set_tout(i2c->dev, I2C_LL_MAX_TIMEOUT);
   i2c_slave_set_frequency(i2c, frequency);
@@ -357,7 +361,11 @@ esp_err_t i2cSlaveInit(uint8_t num, int sda, int scl, uint16_t slaveID, uint32_t
 
   i2c_ll_disable_intr_mask(i2c->dev, I2C_LL_INTR_MASK);
   i2c_ll_clear_intr_mask(i2c->dev, I2C_LL_INTR_MASK);
+#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 4, 0)
+  i2c_ll_enable_fifo_mode(i2c->dev, true);
+#else
   i2c_ll_slave_set_fifo_mode(i2c->dev, true);
+#endif
 
   if (!i2c->intr_handle) {
     uint32_t flags = ESP_INTR_FLAG_LOWMED | ESP_INTR_FLAG_SHARED;
diff --git a/cores/esp32/esp32-hal-i2c.c b/cores/esp32/esp32-hal-i2c.c
index 359b2161201..71c8ae1c428 100644
--- a/cores/esp32/esp32-hal-i2c.c
+++ b/cores/esp32/esp32-hal-i2c.c
@@ -15,6 +15,8 @@
 #include "esp32-hal-i2c.h"
 
 #if SOC_I2C_SUPPORTED
+#include "esp_idf_version.h"
+#if ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(5, 4, 0)
 #include "esp32-hal.h"
 #if !CONFIG_DISABLE_HAL_LOCKS
 #include "freertos/FreeRTOS.h"
@@ -429,4 +431,5 @@ esp_err_t i2cGetClock(uint8_t i2c_num, uint32_t *frequency) {
   return ESP_OK;
 }
 
+#endif /* ESP_IDF_VERSION < ESP_IDF_VERSION_VAL(5, 4, 0) */
 #endif /* SOC_I2C_SUPPORTED */
diff --git a/cores/esp32/esp32-hal-misc.c b/cores/esp32/esp32-hal-misc.c
index 02871872f83..50e2973d27a 100644
--- a/cores/esp32/esp32-hal-misc.c
+++ b/cores/esp32/esp32-hal-misc.c
@@ -25,7 +25,7 @@
 #include "esp_ota_ops.h"
 #endif  //CONFIG_APP_ROLLBACK_ENABLE
 #include "esp_private/startup_internal.h"
-#ifdef CONFIG_BT_ENABLED
+#if defined(CONFIG_BT_ENABLED) && SOC_BT_SUPPORTED
 #include "esp_bt.h"
 #endif  //CONFIG_BT_ENABLED
 #include <sys/time.h>
@@ -305,7 +305,7 @@ void initArduino() {
   if (err) {
     log_e("Failed to initialize NVS! Error: %u", err);
   }
-#ifdef CONFIG_BT_ENABLED
+#if defined(CONFIG_BT_ENABLED) && SOC_BT_SUPPORTED
   if (!btInUse()) {
     esp_bt_controller_mem_release(ESP_BT_MODE_BTDM);
   }
diff --git a/cores/esp32/esp32-hal-uart.c b/cores/esp32/esp32-hal-uart.c
index 34a2660e3a3..75e2da013ea 100644
--- a/cores/esp32/esp32-hal-uart.c
+++ b/cores/esp32/esp32-hal-uart.c
@@ -1,4 +1,4 @@
-// Copyright 2015-2024 Espressif Systems (Shanghai) PTE LTD
+// Copyright 2015-2025 Espressif Systems (Shanghai) PTE LTD
 //
 // Licensed under the Apache License, Version 2.0 (the "License");
 // you may not use this file except in compliance with the License.
@@ -33,6 +33,11 @@
 #include "hal/gpio_hal.h"
 #include "esp_rom_gpio.h"
 
+#include "driver/rtc_io.h"
+#include "driver/lp_io.h"
+#include "soc/uart_periph.h"
+#include "esp_private/uart_share_hw_ctrl.h"
+
 static int s_uart_debug_nr = 0;         // UART number for debug output
 #define REF_TICK_BAUDRATE_LIMIT 250000  // this is maximum UART badrate using REF_TICK as clock
 
@@ -62,18 +67,21 @@ struct uart_struct_t {
 
 static uart_t _uart_bus_array[] = {
   {0, false, 0, NULL, -1, -1, -1, -1, 0, 0, 0, 0, false, 0},
-#if SOC_UART_HP_NUM > 1
+#if SOC_UART_NUM > 1
   {1, false, 0, NULL, -1, -1, -1, -1, 0, 0, 0, 0, false, 0},
 #endif
-#if SOC_UART_HP_NUM > 2
+#if SOC_UART_NUM > 2
   {2, false, 0, NULL, -1, -1, -1, -1, 0, 0, 0, 0, false, 0},
 #endif
-#if SOC_UART_HP_NUM > 3
+#if SOC_UART_NUM > 3
   {3, false, 0, NULL, -1, -1, -1, -1, 0, 0, 0, 0, false, 0},
 #endif
-#if SOC_UART_HP_NUM > 4
+#if SOC_UART_NUM > 4
   {4, false, 0, NULL, -1, -1, -1, -1, 0, 0, 0, 0, false, 0},
 #endif
+#if SOC_UART_NUM > 5
+  {5, false, 0, NULL, -1, -1, -1, -1, 0, 0, 0, 0, false, 0},
+#endif
 };
 
 #else
@@ -88,27 +96,121 @@ static uart_t _uart_bus_array[] = {
 
 static uart_t _uart_bus_array[] = {
   {NULL, 0, false, 0, NULL, -1, -1, -1, -1, 0, 0, 0, 0, false, 0},
-#if SOC_UART_HP_NUM > 1
+#if SOC_UART_NUM > 1
   {NULL, 1, false, 0, NULL, -1, -1, -1, -1, 0, 0, 0, 0, false, 0},
 #endif
-#if SOC_UART_HP_NUM > 2
+#if SOC_UART_NUM > 2
   {NULL, 2, false, 0, NULL, -1, -1, -1, -1, 0, 0, 0, 0, false, 0},
 #endif
-#if SOC_UART_HP_NUM > 3
+#if SOC_UART_NUM > 3
   {NULL, 3, false, 0, NULL, -1, -1, -1, -1, 0, 0, 0, 0, false, 0},
 #endif
-#if SOC_UART_HP_NUM > 4
+#if SOC_UART_NUM > 4
   {NULL, 4, false, 0, NULL, -1, -1, -1, -1, 0, 0, 0, 0, false, 0},
 #endif
+#if SOC_UART_NUM > 5
+  {NULL, 5, false, 0, NULL, -1, -1, -1, -1, 0, 0, 0, 0, false, 0},
+#endif
 };
 
 #endif
 
+#if SOC_UART_LP_NUM >= 1
+// LP UART enable pins routine
+static bool lp_uart_config_io(uint8_t uart_num, int8_t pin, rtc_gpio_mode_t direction, uint32_t idx) {
+  /* Skip configuration if the LP_IO is -1 */
+  if (pin < 0) {
+    return true;
+  }
+
+  // Initialize LP_IO
+  if (rtc_gpio_init(pin) != ESP_OK) {
+    log_e("Failed to initialize LP_IO %d", pin);
+    return false;
+  }
+
+  // Set LP_IO direction
+  if (rtc_gpio_set_direction(pin, direction) != ESP_OK) {
+    log_e("Failed to set LP_IO %d direction", pin);
+    return false;
+  }
+
+  // Connect pins
+  const uart_periph_sig_t *upin = &uart_periph_signal[uart_num].pins[idx];
+#if !SOC_LP_GPIO_MATRIX_SUPPORTED  // ESP32-C6/C61/C5
+  // When LP_IO Matrix is not support, LP_IO Mux must be connected to the pins
+  if (rtc_gpio_iomux_func_sel(pin, upin->iomux_func) != ESP_OK) {
+    log_e("Failed to set LP_IO pin %d into Mux function", pin);
+    return false;
+  }
+#else   // So far, only ESP32-P4
+  // If the configured pin is the default LP_IO Mux pin for LP UART, then set the LP_IO MUX function
+  if (upin->default_gpio == pin) {
+    if (rtc_gpio_iomux_func_sel(pin, upin->iomux_func) != ESP_OK) {
+      log_e("Failed to set LP_IO pin %d into Mux function", pin);
+      return false;
+    }
+  } else {
+    // Otherwise, set the LP_IO Matrix and select FUNC1
+    if (rtc_gpio_iomux_func_sel(pin, 1) != ESP_OK) {
+      log_e("Failed to set LP_IO pin %d into Mux function GPIO", pin);
+      return false;
+    }
+    // Connect the LP_IO to the LP UART peripheral signal
+    esp_err_t ret;
+    if (direction == RTC_GPIO_MODE_OUTPUT_ONLY) {
+      ret = lp_gpio_connect_out_signal(pin, UART_PERIPH_SIGNAL(uart_num, idx), 0, 0);
+    } else {
+      ret = lp_gpio_connect_in_signal(pin, UART_PERIPH_SIGNAL(uart_num, idx), 0);
+    }
+    if (ret != ESP_OK) {
+      log_e("Failed to connect LP_IO pin %d to UART%d signal", pin, uart_num);
+      return false;
+    }
+  }
+#endif  // SOC_LP_GPIO_MATRIX_SUPPORTED
+
+  return true;
+}
+
+// When LP UART needs the RTC IO MUX to set the pin, it will always have fixed pins for RX, TX, CTS and RTS
+static bool lpuartCheckPins(int8_t rxPin, int8_t txPin, int8_t ctsPin, int8_t rtsPin, uint8_t uart_nr) {
+// check if LP UART is being used and if the pins are valid
+#if !SOC_LP_GPIO_MATRIX_SUPPORTED  // ESP32-C6/C61/C5
+  uint16_t lp_uart_fixed_pin = uart_periph_signal[uart_nr].pins[SOC_UART_RX_PIN_IDX].default_gpio;
+  if (uart_nr >= SOC_UART_HP_NUM) {  // it is a LP UART NUM
+    if (rxPin > 0 && rxPin != lp_uart_fixed_pin) {
+      log_e("UART%d LP UART requires RX pin to be set to %d.", uart_nr, lp_uart_fixed_pin);
+      return false;
+    }
+    lp_uart_fixed_pin = uart_periph_signal[uart_nr].pins[SOC_UART_TX_PIN_IDX].default_gpio;
+    if (txPin > 0 && txPin != lp_uart_fixed_pin) {
+      log_e("UART%d LP UART requires TX pin to be set to %d.", uart_nr, lp_uart_fixed_pin);
+      return false;
+    }
+    lp_uart_fixed_pin = uart_periph_signal[uart_nr].pins[SOC_UART_CTS_PIN_IDX].default_gpio;
+    if (ctsPin > 0 && ctsPin != lp_uart_fixed_pin) {
+      log_e("UART%d LP UART requires CTS pin to be set to %d.", uart_nr, lp_uart_fixed_pin);
+      return false;
+    }
+    lp_uart_fixed_pin = uart_periph_signal[uart_nr].pins[SOC_UART_RTS_PIN_IDX].default_gpio;
+    if (rtsPin > 0 && rtsPin != lp_uart_fixed_pin) {
+      log_e("UART%d LP UART requires RTS pin to be set to %d.", uart_nr, lp_uart_fixed_pin);
+      return false;
+    }
+  }
+  return true;
+#else   // ESP32-P4 can set any pin for LP UART
+  return true;
+#endif  // SOC_LP_GPIO_MATRIX_SUPPORTED
+}
+#endif  // SOC_UART_LP_NUM >= 1
+
 // Negative Pin Number will keep it unmodified, thus this function can detach individual pins
 // This function will also unset the pins in the Peripheral Manager and set the pin to -1 after detaching
 static bool _uartDetachPins(uint8_t uart_num, int8_t rxPin, int8_t txPin, int8_t ctsPin, int8_t rtsPin) {
-  if (uart_num >= SOC_UART_HP_NUM) {
-    log_e("Serial number is invalid, please use number from 0 to %u", SOC_UART_HP_NUM - 1);
+  if (uart_num >= SOC_UART_NUM) {
+    log_e("Serial number is invalid, please use number from 0 to %u", SOC_UART_NUM - 1);
     return false;
   }
   // get UART information
@@ -117,7 +219,7 @@ static bool _uartDetachPins(uint8_t uart_num, int8_t rxPin, int8_t txPin, int8_t
   //log_v("detaching UART%d pins: prev,pin RX(%d,%d) TX(%d,%d) CTS(%d,%d) RTS(%d,%d)", uart_num,
   //        uart->_rxPin, rxPin, uart->_txPin, txPin, uart->_ctsPin, ctsPin, uart->_rtsPin, rtsPin); vTaskDelay(10);
 
-  // detaches pins and sets Peripheral Manager and UART information
+  // detaches HP and LP pins and sets Peripheral Manager and UART information
   if (rxPin >= 0 && uart->_rxPin == rxPin && perimanGetPinBusType(rxPin) == ESP32_BUS_TYPE_UART_RX) {
     gpio_hal_iomux_func_sel(GPIO_PIN_MUX_REG[rxPin], PIN_FUNC_GPIO);
     // avoids causing BREAK in the UART line
@@ -194,8 +296,8 @@ static bool _uartDetachBus_RTS(void *busptr) {
 // Attach function for UART
 // connects the IO Pad, set Paripheral Manager and internal UART structure data
 static bool _uartAttachPins(uint8_t uart_num, int8_t rxPin, int8_t txPin, int8_t ctsPin, int8_t rtsPin) {
-  if (uart_num >= SOC_UART_HP_NUM) {
-    log_e("Serial number is invalid, please use number from 0 to %u", SOC_UART_HP_NUM - 1);
+  if (uart_num >= SOC_UART_NUM) {
+    log_e("Serial number is invalid, please use number from 0 to %u", SOC_UART_NUM - 1);
     return false;
   }
   // get UART information
@@ -203,6 +305,8 @@ static bool _uartAttachPins(uint8_t uart_num, int8_t rxPin, int8_t txPin, int8_t
   //log_v("attaching UART%d pins: prev,new RX(%d,%d) TX(%d,%d) CTS(%d,%d) RTS(%d,%d)", uart_num,
   //        uart->_rxPin, rxPin, uart->_txPin, txPin, uart->_ctsPin, ctsPin, uart->_rtsPin, rtsPin); vTaskDelay(10);
 
+  // IDF uart_set_pin() checks if the pin is used within LP UART and if it is a valid RTC IO pin
+  // No need for Arduino Layer to check it again
   bool retCode = true;
   if (rxPin >= 0) {
     // forces a clean detaching from a previous peripheral
@@ -211,6 +315,11 @@ static bool _uartAttachPins(uint8_t uart_num, int8_t rxPin, int8_t txPin, int8_t
     }
     // connect RX Pad
     bool ret = ESP_OK == uart_set_pin(uart->num, UART_PIN_NO_CHANGE, rxPin, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE);
+#if SOC_UART_LP_NUM >= 1
+    if (ret && uart_num >= SOC_UART_HP_NUM) {  // it is a LP UART NUM
+      ret &= lp_uart_config_io(uart->num, rxPin, RTC_GPIO_MODE_INPUT_ONLY, SOC_UART_RX_PIN_IDX);
+    }
+#endif
     if (ret) {
       ret &= perimanSetPinBus(rxPin, ESP32_BUS_TYPE_UART_RX, (void *)uart, uart_num, -1);
       if (ret) {
@@ -229,6 +338,11 @@ static bool _uartAttachPins(uint8_t uart_num, int8_t rxPin, int8_t txPin, int8_t
     }
     // connect TX Pad
     bool ret = ESP_OK == uart_set_pin(uart->num, txPin, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE);
+#if SOC_UART_LP_NUM >= 1
+    if (ret && uart_num >= SOC_UART_HP_NUM) {  // it is a LP UART NUM
+      ret &= lp_uart_config_io(uart->num, txPin, RTC_GPIO_MODE_OUTPUT_ONLY, SOC_UART_TX_PIN_IDX);
+    }
+#endif
     if (ret) {
       ret &= perimanSetPinBus(txPin, ESP32_BUS_TYPE_UART_TX, (void *)uart, uart_num, -1);
       if (ret) {
@@ -247,6 +361,11 @@ static bool _uartAttachPins(uint8_t uart_num, int8_t rxPin, int8_t txPin, int8_t
     }
     // connect CTS Pad
     bool ret = ESP_OK == uart_set_pin(uart->num, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, ctsPin);
+#if SOC_UART_LP_NUM >= 1
+    if (ret && uart_num >= SOC_UART_HP_NUM) {  // it is a LP UART NUM
+      ret &= lp_uart_config_io(uart->num, ctsPin, RTC_GPIO_MODE_INPUT_ONLY, SOC_UART_CTS_PIN_IDX);
+    }
+#endif
     if (ret) {
       ret &= perimanSetPinBus(ctsPin, ESP32_BUS_TYPE_UART_CTS, (void *)uart, uart_num, -1);
       if (ret) {
@@ -265,6 +384,11 @@ static bool _uartAttachPins(uint8_t uart_num, int8_t rxPin, int8_t txPin, int8_t
     }
     // connect RTS Pad
     bool ret = ESP_OK == uart_set_pin(uart->num, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, rtsPin, UART_PIN_NO_CHANGE);
+#if SOC_UART_LP_NUM >= 1
+    if (ret && uart_num >= SOC_UART_HP_NUM) {  // it is a LP UART NUM
+      ret &= lp_uart_config_io(uart->num, rtsPin, RTC_GPIO_MODE_OUTPUT_ONLY, SOC_UART_RTS_PIN_IDX);
+    }
+#endif
     if (ret) {
       ret &= perimanSetPinBus(rtsPin, ESP32_BUS_TYPE_UART_RTS, (void *)uart, uart_num, -1);
       if (ret) {
@@ -321,13 +445,20 @@ bool uartIsDriverInstalled(uart_t *uart) {
 // Negative Pin Number will keep it unmodified, thus this function can set individual pins
 // When pins are changed, it will detach the previous one
 bool uartSetPins(uint8_t uart_num, int8_t rxPin, int8_t txPin, int8_t ctsPin, int8_t rtsPin) {
-  if (uart_num >= SOC_UART_HP_NUM) {
-    log_e("Serial number is invalid, please use number from 0 to %u", SOC_UART_HP_NUM - 1);
+  if (uart_num >= SOC_UART_NUM) {
+    log_e("Serial number is invalid, please use number from 0 to %u", SOC_UART_NUM - 1);
     return false;
   }
   // get UART information
   uart_t *uart = &_uart_bus_array[uart_num];
 
+#if SOC_UART_LP_NUM >= 1
+  // check if LP UART is being used and if the pins are valid
+  if (!lpuartCheckPins(rxPin, txPin, ctsPin, rtsPin, uart_num)) {
+    return false;  // failed to set pins
+  }
+#endif
+
   bool retCode = true;
   UART_MUTEX_LOCK();
 
@@ -391,7 +522,7 @@ bool _testUartBegin(
   uint8_t uart_nr, uint32_t baudrate, uint32_t config, int8_t rxPin, int8_t txPin, uint32_t rx_buffer_size, uint32_t tx_buffer_size, bool inverted,
   uint8_t rxfifo_full_thrhd
 ) {
-  if (uart_nr >= SOC_UART_HP_NUM) {
+  if (uart_nr >= SOC_UART_NUM) {
     return false;  // no new driver has to be installed
   }
   uart_t *uart = &_uart_bus_array[uart_nr];
@@ -413,13 +544,24 @@ uart_t *uartBegin(
   uint8_t uart_nr, uint32_t baudrate, uint32_t config, int8_t rxPin, int8_t txPin, uint32_t rx_buffer_size, uint32_t tx_buffer_size, bool inverted,
   uint8_t rxfifo_full_thrhd
 ) {
-  if (uart_nr >= SOC_UART_HP_NUM) {
-    log_e("UART number is invalid, please use number from 0 to %u", SOC_UART_HP_NUM - 1);
+  if (uart_nr >= SOC_UART_NUM) {
+    log_e("UART number is invalid, please use number from 0 to %u", SOC_UART_NUM - 1);
     return NULL;  // no new driver was installed
   }
   uart_t *uart = &_uart_bus_array[uart_nr];
   log_v("UART%d baud(%ld) Mode(%x) rxPin(%d) txPin(%d)", uart_nr, baudrate, config, rxPin, txPin);
 
+#if SOC_UART_LP_NUM >= 1
+  // check if LP UART is being used and if the pins are valid
+  if (!lpuartCheckPins(rxPin, txPin, UART_PIN_NO_CHANGE, UART_PIN_NO_CHANGE, uart_nr)) {
+    if (uart_is_driver_installed(uart_nr)) {
+      return uart;  // keep the same installed driver
+    } else {
+      return NULL;  // no new driver was installed
+    }
+  }
+#endif
+
 #if !CONFIG_DISABLE_HAL_LOCKS
   if (uart->lock == NULL) {
     uart->lock = xSemaphoreCreateMutex();
@@ -436,20 +578,18 @@ uart_t *uartBegin(
     if (uart->_rx_buffer_size != rx_buffer_size || uart->_tx_buffer_size != tx_buffer_size || uart->_inverted != inverted
         || uart->_rxfifo_full_thrhd != rxfifo_full_thrhd) {
       log_v("UART%d changing buffer sizes or inverted signal or rxfifo_full_thrhd. IDF driver will be restarted", uart_nr);
+      log_v("RX buffer size: %d -> %d", uart->_rx_buffer_size, rx_buffer_size);
+      log_v("TX buffer size: %d -> %d", uart->_tx_buffer_size, tx_buffer_size);
+      log_v("Inverted signal: %s -> %s", uart->_inverted ? "true" : "false", inverted ? "true" : "false");
+      log_v("RX FIFO full threshold: %d -> %d", uart->_rxfifo_full_thrhd, rxfifo_full_thrhd);
       uartEnd(uart_nr);
     } else {
       bool retCode = true;
-      UART_MUTEX_LOCK();
       //User may just want to change some parameters, such as baudrate, data length, parity, stop bits or pins
       if (uart->_baudrate != baudrate) {
-        if (ESP_OK != uart_set_baudrate(uart_nr, baudrate)) {
-          log_e("UART%d changing baudrate failed.", uart_nr);
-          retCode = false;
-        } else {
-          log_v("UART%d changed baudrate to %d", uart_nr, baudrate);
-          uart->_baudrate = baudrate;
-        }
+        retCode = uartSetBaudRate(uart, baudrate);
       }
+      UART_MUTEX_LOCK();
       uart_word_length_t data_bits = (config & 0xc) >> 2;
       uart_parity_t parity = config & 0x3;
       uart_stop_bits_t stop_bits = (config & 0x30) >> 4;
@@ -500,7 +640,7 @@ uart_t *uartBegin(
       }
       UART_MUTEX_UNLOCK();
       if (retCode) {
-        // UART driver was already working, just return the uart_t structure, syaing that no new driver was installed
+        // UART driver was already working, just return the uart_t structure, saying that no new driver was installed
         return uart;
       }
       // if we reach this point, it means that we need to restart the UART driver
@@ -516,22 +656,39 @@ uart_t *uartBegin(
   uart_config.parity = (config & 0x3);
   uart_config.stop_bits = (config & 0x30) >> 4;
   uart_config.flow_ctrl = UART_HW_FLOWCTRL_DISABLE;
-  uart_config.rx_flow_ctrl_thresh = rxfifo_full_thrhd;
+  uart_config.rx_flow_ctrl_thresh = rxfifo_full_thrhd >= UART_HW_FIFO_LEN(uart_nr) ? UART_HW_FIFO_LEN(uart_nr) - 6 : rxfifo_full_thrhd;
+  log_v(
+    "UART%d RX FIFO full threshold set to %d (value requested: %d || FIFO Max = %d)", uart_nr, uart_config.rx_flow_ctrl_thresh, rxfifo_full_thrhd,
+    UART_HW_FIFO_LEN(uart_nr)
+  );
+  rxfifo_full_thrhd = uart_config.rx_flow_ctrl_thresh;  // makes sure that it will be set correctly in the struct
   uart_config.baud_rate = baudrate;
-  // there is an issue when returning from light sleep with the C6 and H2: the uart baud rate is not restored
-  // therefore, uart clock source will set to XTAL for all SoC that support it. This fix solves the C6|H2 issue.
+#if SOC_UART_LP_NUM >= 1
+  if (uart_nr >= SOC_UART_HP_NUM) {                    // it is a LP UART NUM
+    uart_config.lp_source_clk = LP_UART_SCLK_DEFAULT;  // use default LP clock
+    log_v("Setting UART%d to use LP clock", uart_nr);
+  } else
+#endif
+  {
+    // there is an issue when returning from light sleep with the C6 and H2: the uart baud rate is not restored
+    // therefore, uart clock source will set to XTAL for all SoC that support it. This fix solves the C6|H2 issue.
 #if SOC_UART_SUPPORT_XTAL_CLK
-  uart_config.source_clk = UART_SCLK_XTAL;  // valid for C2, S3, C3, C6, H2 and P4
+    uart_config.source_clk = UART_SCLK_XTAL;  // valid for C2, S3, C3, C6, H2 and P4
+    log_v("Setting UART%d to use XTAL clock", uart_nr);
 #elif SOC_UART_SUPPORT_REF_TICK
-  if (baudrate <= REF_TICK_BAUDRATE_LIMIT) {
-    uart_config.source_clk = UART_SCLK_REF_TICK;  // valid for ESP32, S2 - MAX supported baud rate is 250 Kbps
-  } else {
-    uart_config.source_clk = UART_SCLK_APB;  // baudrate may change with the APB Frequency!
-  }
+    if (baudrate <= REF_TICK_BAUDRATE_LIMIT) {
+      uart_config.source_clk = UART_SCLK_REF_TICK;  // valid for ESP32, S2 - MAX supported baud rate is 250 Kbps
+      log_v("Setting UART%d to use REF_TICK clock", uart_nr);
+    } else {
+      uart_config.source_clk = UART_SCLK_APB;  // baudrate may change with the APB Frequency!
+      log_v("Setting UART%d to use APB clock", uart_nr);
+    }
 #else
-  // Default CLK Source: CLK_APB for ESP32|S2|S3|C3 -- CLK_PLL_F40M for C2 -- CLK_PLL_F48M for H2 -- CLK_PLL_F80M for C6
-  uart_config.source_clk = UART_SCLK_DEFAULT;  // baudrate may change with the APB Frequency!
+    // Default CLK Source: CLK_APB for ESP32|S2|S3|C3 -- CLK_PLL_F40M for C2 -- CLK_PLL_F48M for H2 -- CLK_PLL_F80M for C6
+    uart_config.source_clk = UART_SCLK_DEFAULT;  // baudrate may change with the APB Frequency!
+    log_v("Setting UART%d to use DEFAULT clock", uart_nr);
 #endif
+  }
 
   UART_MUTEX_LOCK();
   bool retCode = ESP_OK == uart_driver_install(uart_nr, rx_buffer_size, tx_buffer_size, 20, &(uart->uart_event_queue), 0);
@@ -600,7 +757,11 @@ bool uartSetRxTimeout(uart_t *uart, uint8_t numSymbTimeout) {
   if (uart == NULL) {
     return false;
   }
-
+  uint16_t maxRXTimeout = uart_get_max_rx_timeout(uart->num);
+  if (numSymbTimeout > maxRXTimeout) {
+    log_e("Invalid RX Timeout value, its limit is %d", maxRXTimeout);
+    return false;
+  }
   UART_MUTEX_LOCK();
   bool retCode = (ESP_OK == uart_set_rx_timeout(uart->num, numSymbTimeout));
   UART_MUTEX_UNLOCK();
@@ -611,16 +772,25 @@ bool uartSetRxFIFOFull(uart_t *uart, uint8_t numBytesFIFOFull) {
   if (uart == NULL) {
     return false;
   }
-
+  uint8_t rxfifo_full_thrhd = numBytesFIFOFull >= UART_HW_FIFO_LEN(uart->num) ? UART_HW_FIFO_LEN(uart->num) - 6 : numBytesFIFOFull;
   UART_MUTEX_LOCK();
-  bool retCode = (ESP_OK == uart_set_rx_full_threshold(uart->num, numBytesFIFOFull));
+  bool retCode = (ESP_OK == uart_set_rx_full_threshold(uart->num, rxfifo_full_thrhd));
+  if (retCode) {
+    uart->_rxfifo_full_thrhd = rxfifo_full_thrhd;
+    if (rxfifo_full_thrhd != numBytesFIFOFull) {
+      log_w("The RX FIFO Full value for UART%d was set to %d instead of %d", uart->num, rxfifo_full_thrhd, numBytesFIFOFull);
+    }
+    log_v("UART%d RX FIFO Full value set to %d from a requested value of %d", uart->num, rxfifo_full_thrhd, numBytesFIFOFull);
+  } else {
+    log_e("UART%d failed to set RX FIFO Full value to %d", uart->num, numBytesFIFOFull);
+  }
   UART_MUTEX_UNLOCK();
   return retCode;
 }
 
 void uartEnd(uint8_t uart_num) {
-  if (uart_num >= SOC_UART_HP_NUM) {
-    log_e("Serial number is invalid, please use number from 0 to %u", SOC_UART_HP_NUM - 1);
+  if (uart_num >= SOC_UART_NUM) {
+    log_e("Serial number is invalid, please use number from 0 to %u", SOC_UART_NUM - 1);
     return;
   }
   // get UART information
@@ -645,7 +815,7 @@ void uartSetRxInvert(uart_t *uart, bool invert) {
   //     ESP_ERROR_CHECK(uart_set_line_inverse(uart->num, UART_SIGNAL_RXD_INV));
   // else
   //     ESP_ERROR_CHECK(uart_set_line_inverse(uart->num, UART_SIGNAL_INV_DISABLE));
-
+  log_e("uartSetRxInvert is not supported in ESP32C6, ESP32H2 and ESP32P4");
 #else
   // this implementation is better over IDF API because it only affects RXD
   // this is supported in ESP32, ESP32-S2 and ESP32-C3
@@ -800,21 +970,36 @@ void uartFlushTxOnly(uart_t *uart, bool txOnly) {
   UART_MUTEX_UNLOCK();
 }
 
-void uartSetBaudRate(uart_t *uart, uint32_t baud_rate) {
+bool uartSetBaudRate(uart_t *uart, uint32_t baud_rate) {
   if (uart == NULL) {
-    return;
+    return false;
   }
+  bool retCode = true;
   UART_MUTEX_LOCK();
-#if !SOC_UART_SUPPORT_XTAL_CLK
+#if SOC_UART_SUPPORT_XTAL_CLK  // ESP32-S3, ESP32-C3, ESP32-C5, ESP32-C6, ESP32-H2 and ESP32-P4
+  soc_module_clk_t newClkSrc = UART_SCLK_XTAL;
+#if SOC_UART_LP_NUM >= 1
+  if (uart->num >= SOC_UART_HP_NUM) {  // it is a LP UART NUM
+    newClkSrc = LP_UART_SCLK_DEFAULT;  // use default LP clock
+  }
+#endif
+  // ESP32-P4 demands an atomic operation for setting the clock source
+  HP_UART_SRC_CLK_ATOMIC() {
+    uart_ll_set_sclk(UART_LL_GET_HW(uart->num), newClkSrc);
+  }
+#else  // ESP32, ESP32-S2
   soc_module_clk_t newClkSrc = baud_rate <= REF_TICK_BAUDRATE_LIMIT ? SOC_MOD_CLK_REF_TICK : SOC_MOD_CLK_APB;
   uart_ll_set_sclk(UART_LL_GET_HW(uart->num), newClkSrc);
 #endif
   if (uart_set_baudrate(uart->num, baud_rate) == ESP_OK) {
+    log_v("Setting UART%d baud rate to %ld.", uart->num, baud_rate);
     uart->_baudrate = baud_rate;
   } else {
-    log_e("Setting UART%d baud rate to %d has failed.", uart->num, baud_rate);
+    retCode = false;
+    log_e("Setting UART%d baud rate to %ld has failed.", uart->num, baud_rate);
   }
   UART_MUTEX_UNLOCK();
+  return retCode;
 }
 
 uint32_t uartGetBaudRate(uart_t *uart) {
@@ -889,7 +1074,7 @@ void uart_install_putc() {
 // Routines that take care of UART mode in the HardwareSerial Class code
 // used to set UART_MODE_RS485_HALF_DUPLEX auto RTS for TXD for ESP32 chips
 bool uartSetMode(uart_t *uart, uart_mode_t mode) {
-  if (uart == NULL || uart->num >= SOC_UART_HP_NUM) {
+  if (uart == NULL || uart->num >= SOC_UART_NUM) {
     return false;
   }
 
@@ -900,6 +1085,7 @@ bool uartSetMode(uart_t *uart, uart_mode_t mode) {
 }
 
 void uartSetDebug(uart_t *uart) {
+  // LP UART is not supported for debug
   if (uart == NULL || uart->num >= SOC_UART_HP_NUM) {
     s_uart_debug_nr = -1;
   } else {
@@ -1170,7 +1356,9 @@ unsigned long uartDetectBaudrate(uart_t *uart) {
    This creates a loop that lets us receive anything we send on the UART without external wires.
 */
 void uart_internal_loopback(uint8_t uartNum, int8_t rxPin) {
-  if (uartNum > SOC_UART_HP_NUM - 1 || !GPIO_IS_VALID_GPIO(rxPin)) {
+  // LP UART is not supported for loopback
+  if (uartNum >= SOC_UART_HP_NUM || !GPIO_IS_VALID_GPIO(rxPin)) {
+    log_e("UART%d is not supported for loopback or RX pin %d is invalid.", uartNum, rxPin);
     return;
   }
   esp_rom_gpio_connect_out_signal(rxPin, UART_TX_SIGNAL(uartNum), false, false);
@@ -1198,4 +1386,24 @@ int uart_send_msg_with_break(uint8_t uartNum, uint8_t *msg, size_t msgSize) {
   return uart_write_bytes_with_break(uartNum, (const void *)msg, msgSize, 12);
 }
 
+// returns the maximum valid uart RX Timeout based on the UART Source Clock and Baudrate
+uint16_t uart_get_max_rx_timeout(uint8_t uartNum) {
+  if (uartNum >= SOC_UART_NUM) {
+    log_e("UART%d is invalid. This device has %d UARTs, from 0 to %d.", uartNum, SOC_UART_NUM, SOC_UART_NUM - 1);
+    return (uint16_t)-1;
+  }
+  uint16_t tout_max_thresh = uart_ll_max_tout_thrd(UART_LL_GET_HW(uartNum));
+  uint8_t symbol_len = 1;  // number of bits per symbol including start
+  uart_parity_t parity_mode;
+  uart_stop_bits_t stop_bit;
+  uart_word_length_t data_bit;
+  uart_ll_get_data_bit_num(UART_LL_GET_HW(uartNum), &data_bit);
+  uart_ll_get_stop_bits(UART_LL_GET_HW(uartNum), &stop_bit);
+  uart_ll_get_parity(UART_LL_GET_HW(uartNum), &parity_mode);
+  symbol_len += (data_bit < UART_DATA_BITS_MAX) ? (uint8_t)data_bit + 5 : 8;
+  symbol_len += (stop_bit > UART_STOP_BITS_1) ? 2 : 1;
+  symbol_len += (parity_mode > UART_PARITY_DISABLE) ? 1 : 0;
+  return (uint16_t)(tout_max_thresh / symbol_len);
+}
+
 #endif /* SOC_UART_SUPPORTED */
diff --git a/cores/esp32/esp32-hal-uart.h b/cores/esp32/esp32-hal-uart.h
index 402b5785915..4d686fdd23d 100644
--- a/cores/esp32/esp32-hal-uart.h
+++ b/cores/esp32/esp32-hal-uart.h
@@ -1,4 +1,4 @@
-// Copyright 2015-2023 Espressif Systems (Shanghai) PTE LTD
+// Copyright 2015-2025 Espressif Systems (Shanghai) PTE LTD
 //
 // Licensed under the Apache License, Version 2.0 (the "License");
 // you may not use this file except in compliance with the License.
@@ -17,6 +17,7 @@
 
 #include "soc/soc_caps.h"
 #if SOC_UART_SUPPORTED
+#include "soc/uart_pins.h"
 
 #ifdef __cplusplus
 extern "C" {
@@ -57,7 +58,7 @@ void uartWriteBuf(uart_t *uart, const uint8_t *data, size_t len);
 void uartFlush(uart_t *uart);
 void uartFlushTxOnly(uart_t *uart, bool txOnly);
 
-void uartSetBaudRate(uart_t *uart, uint32_t baud_rate);
+bool uartSetBaudRate(uart_t *uart, uint32_t baud_rate);
 uint32_t uartGetBaudRate(uart_t *uart);
 
 void uartSetRxInvert(uart_t *uart, bool invert);
@@ -115,6 +116,10 @@ void uart_send_break(uint8_t uartNum);
 // Sends a buffer and at the end of the stream, it generates BREAK in the line
 int uart_send_msg_with_break(uint8_t uartNum, uint8_t *msg, size_t msgSize);
 
+// UART RX Timeout (in UART Symbols) depends on the UART Clock Source and the SoC that is used
+// This is a helper function that calculates what is the maximum RX Timeout that a running UART IDF driver allows.
+uint16_t uart_get_max_rx_timeout(uint8_t uartNum);
+
 #ifdef __cplusplus
 }
 #endif
diff --git a/cores/esp32/esp_arduino_version.h b/cores/esp32/esp_arduino_version.h
index f8b00d3a1dd..b1355e908ae 100644
--- a/cores/esp32/esp_arduino_version.h
+++ b/cores/esp32/esp_arduino_version.h
@@ -21,9 +21,9 @@ extern "C" {
 /** Major version number (X.x.x) */
 #define ESP_ARDUINO_VERSION_MAJOR 3
 /** Minor version number (x.X.x) */
-#define ESP_ARDUINO_VERSION_MINOR 1
+#define ESP_ARDUINO_VERSION_MINOR 2
 /** Patch version number (x.x.X) */
-#define ESP_ARDUINO_VERSION_PATCH 3
+#define ESP_ARDUINO_VERSION_PATCH 0
 
 /**
  * Macro to convert ARDUINO version number into an integer
diff --git a/cores/esp32/freertos_stats.cpp b/cores/esp32/freertos_stats.cpp
index 50a98bf502b..b37a5205e11 100644
--- a/cores/esp32/freertos_stats.cpp
+++ b/cores/esp32/freertos_stats.cpp
@@ -31,7 +31,8 @@ void printRunningTasks(Print &printer) {
 #endif
   configRUN_TIME_COUNTER_TYPE ulTotalRunTime = 0;
   TaskStatus_t *pxTaskStatusArray = NULL;
-  volatile UBaseType_t uxArraySize = 0, x = 0;
+  volatile UBaseType_t uxArraySize = 0;
+  uint32_t x = 0;
   const char *taskStates[] = {"Running", "Ready", "Blocked", "Suspended", "Deleted", "Invalid"};
 
   // Take a snapshot of the number of tasks in case it changes while this function is executing.
diff --git a/docs/en/boards/boards.rst b/docs/en/boards/boards.rst
index 05df917c8b1..407b019a78b 100644
--- a/docs/en/boards/boards.rst
+++ b/docs/en/boards/boards.rst
@@ -18,16 +18,18 @@ The ESP32 is divided by family:
 
 * ESP32
     * Wi-Fi, BT and BLE 4
-* ESP32-S2
-    * Wi-Fi only
-* ESP32-S3
-    * Wi-Fi and BLE 5
 * ESP32-C3
     * Wi-Fi and BLE 5
 * ESP32-C6
     * Wi-Fi, BLE 5 and IEEE 802.15.4
 * ESP32-H2
     * BLE 5 and IEEE 802.15.4
+* ESP32-P4
+    * 400 MHz Dual Core RISC-V CPU, 40 MHz ULP Co-processor, single-precision FPU and AI extensions.
+* ESP32-S2
+    * Wi-Fi only
+* ESP32-S3
+    * Wi-Fi and BLE 5
 
 For each family, we have SoC variants with some differentiation. The differences are more about the embedded flash and its size and the number of the cores (dual or single).
 
diff --git a/docs/en/common/datasheet.inc b/docs/en/common/datasheet.inc
index 193359fb73a..7086a12d1a8 100644
--- a/docs/en/common/datasheet.inc
+++ b/docs/en/common/datasheet.inc
@@ -2,16 +2,20 @@ Datasheet
 ---------
 
 * `ESP32`_ (Datasheet)
-* `ESP32-S2`_ (Datasheet)
+* `ESP32-C2`_ (Datasheet)
 * `ESP32-C3`_ (Datasheet)
-* `ESP32-S3`_ (Datasheet)
 * `ESP32-C6`_ (Datasheet)
 * `ESP32-H2`_ (Datasheet)
+* `ESP32-P4`_ (Datasheet)
+* `ESP32-S2`_ (Datasheet)
+* `ESP32-S3`_ (Datasheet)
 
 .. _Espressif Product Selector: https://products.espressif.com/
 .. _ESP32: https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf
-.. _ESP32-S2: https://www.espressif.com/sites/default/files/documentation/esp32-s2_datasheet_en.pdf
+.. _ESP32-C2: https://www.espressif.com/sites/default/files/documentation/esp8684_datasheet_en.pdf
 .. _ESP32-C3: https://www.espressif.com/sites/default/files/documentation/esp32-c3_datasheet_en.pdf
-.. _ESP32-S3: https://www.espressif.com/sites/default/files/documentation/esp32-s3_datasheet_en.pdf
 .. _ESP32-C6: https://www.espressif.com/sites/default/files/documentation/esp32-c6_datasheet_en.pdf
 .. _ESP32-H2: https://www.espressif.com/sites/default/files/documentation/esp32-h2_datasheet_en.pdf
+.. _ESP32-P4: https://www.espressif.com/sites/default/files/documentation/esp32-p4_datasheet_en.pdf
+.. _ESP32-S2: https://www.espressif.com/sites/default/files/documentation/esp32-s2_datasheet_en.pdf
+.. _ESP32-S3: https://www.espressif.com/sites/default/files/documentation/esp32-s3_datasheet_en.pdf
diff --git a/docs/en/contributing.rst b/docs/en/contributing.rst
index fb7843f1fb6..4093c60ec64 100644
--- a/docs/en/contributing.rst
+++ b/docs/en/contributing.rst
@@ -318,7 +318,7 @@ ESP32-C3 target, you would run:
 
     ./.github/scripts/tests_build.sh -s uart -t esp32c3
 
-You should see the output of the build process and the test binary should be generated in the ``~/.arduino/tests/<test_name>/build.tmp`` folder.
+You should see the output of the build process and the test binary should be generated in the ``~/.arduino/tests/<target_chip>/<test_name>/build.tmp`` folder.
 
 Now that the test is built, you can run it in the target board. Connect the target board to your computer and run:
 
@@ -339,7 +339,7 @@ The test will run on the target board and you should see the output of the test
     lucassvaz@Lucas--MacBook-Pro esp32 % ./.github/scripts/tests_run.sh -s uart -t esp32c3
     Sketch uart test type: validation
     Running test: uart -- Config: Default
-    pytest tests --build-dir /Users/lucassvaz/.arduino/tests/uart/build.tmp -k test_uart --junit-xml=/Users/lucassvaz/Espressif/Arduino/hardware/espressif/esp32/tests/validation/uart/esp32c3/uart.xml --embedded-services esp,arduino
+    pytest tests --build-dir /Users/lucassvaz/.arduino/tests/esp32c3/uart/build.tmp -k test_uart --junit-xml=/Users/lucassvaz/Espressif/Arduino/hardware/espressif/esp32/tests/validation/uart/esp32c3/uart.xml --embedded-services esp,arduino
     =============================================================================================== test session starts ================================================================================================
     platform darwin -- Python 3.12.3, pytest-8.2.2, pluggy-1.5.0
     rootdir: /Users/lucassvaz/Espressif/Arduino/hardware/espressif/esp32/tests
diff --git a/docs/en/getting_started.rst b/docs/en/getting_started.rst
index cabb2ddc805..1b0f1bba87a 100644
--- a/docs/en/getting_started.rst
+++ b/docs/en/getting_started.rst
@@ -38,17 +38,18 @@ Here are the ESP32 series supported by the Arduino-ESP32 project:
 SoC        Stable Development Datasheet
 ========== ====== =========== =================================
 ESP32      Yes    Yes         `ESP32`_
-ESP32-S2   Yes    Yes         `ESP32-S2`_
 ESP32-C3   Yes    Yes         `ESP32-C3`_
-ESP32-S3   Yes    Yes         `ESP32-S3`_
 ESP32-C6   Yes    Yes         `ESP32-C6`_
 ESP32-H2   Yes    Yes         `ESP32-H2`_
+ESP32-P4   Yes    Yes         `ESP32-P4`_
+ESP32-S2   Yes    Yes         `ESP32-S2`_
+ESP32-S3   Yes    Yes         `ESP32-S3`_
 ========== ====== =========== =================================
 
 .. note::
-    ESP32-C2 is also supported by Arduino-ESP32 but requires rebuilding the static libraries.
-    This is not trivial and requires a good understanding of the ESP-IDF build system.
-    For more information, see the `Lib Builder documentation <lib_builder.html>`_.
+    ESP32-C2 is also supported by Arduino-ESP32 but requires using Arduino as an ESP-IDF component or rebuilding the static libraries.
+    For more information, see the `Arduino as an ESP-IDF component documentation <esp-idf_component.html>`_ or the
+    `Lib Builder documentation <lib_builder.html>`_, respectively.
 
 See `Boards <boards/boards.html>`_ for more details about ESP32 development boards.
 
diff --git a/docs/en/lib_builder.rst b/docs/en/lib_builder.rst
index 478becc3350..e7edb331fd3 100644
--- a/docs/en/lib_builder.rst
+++ b/docs/en/lib_builder.rst
@@ -151,13 +151,13 @@ Set the build target(chip). ex. 'esp32s3'
 This build command will build for the ESP32-S3 target. You can specify other targets.
 
 * esp32
-* esp32s2
-* esp32s3
 * esp32c2
 * esp32c3
 * esp32c6
 * esp32h2
 * esp32p4
+* esp32s2
+* esp32s3
 
 Set Build Type
 ^^^^^^^^^^^^^^
diff --git a/docs/en/libraries.rst b/docs/en/libraries.rst
index 0e3499f7783..525a5c4ba26 100644
--- a/docs/en/libraries.rst
+++ b/docs/en/libraries.rst
@@ -9,60 +9,68 @@ Supported Peripherals
 
 Currently, the Arduino ESP32 supports the following peripherals with Arduino APIs.
 
-+---------------+-------+-------+-------+-------+-------+-------+-------+
-| Peripheral    | ESP32 | S2    | C3    | S3    | C6    | H2    | Notes |
-+===============+=======+=======+=======+=======+=======+=======+=======+
-| ADC           | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   |       |
-+---------------+-------+-------+-------+-------+-------+-------+-------+
-| BT Classic    | Yes   | N/A   | N/A   | N/A   | N/A   | N/A   |       |
-+---------------+-------+-------+-------+-------+-------+-------+-------+
-| BLE           | Yes   | N/A   | Yes   | Yes   | Yes   | Yes   |       |
-+---------------+-------+-------+-------+-------+-------+-------+-------+
-| DAC           | Yes   | Yes   | N/A   | N/A   | N/A   | N/A   |       |
-+---------------+-------+-------+-------+-------+-------+-------+-------+
-| Ethernet      | Yes   | N/A   | N/A   | N/A   | N/A   | N/A   | (*)   |
-+---------------+-------+-------+-------+-------+-------+-------+-------+
-| GPIO          | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   |       |
-+---------------+-------+-------+-------+-------+-------+-------+-------+
-| Hall Sensor   | N/A   | N/A   | N/A   | N/A   | N/A   | N/A   |       |
-+---------------+-------+-------+-------+-------+-------+-------+-------+
-| I2C           | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   |       |
-+---------------+-------+-------+-------+-------+-------+-------+-------+
-| I2S           | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   |       |
-+---------------+-------+-------+-------+-------+-------+-------+-------+
-| LEDC          | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   |       |
-+---------------+-------+-------+-------+-------+-------+-------+-------+
-| Motor PWM     | No    | N/A   | N/A   | N/A   | N/A   | N/A   |       |
-+---------------+-------+-------+-------+-------+-------+-------+-------+
-| Pulse Counter | No    | No    | No    | No    | No    | No    |       |
-+---------------+-------+-------+-------+-------+-------+-------+-------+
-| RMT           | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   |       |
-+---------------+-------+-------+-------+-------+-------+-------+-------+
-| SDIO          | No    | No    | No    | No    | No    | No    |       |
-+---------------+-------+-------+-------+-------+-------+-------+-------+
-| SDMMC         | Yes   | N/A   | N/A   | Yes   | N/A   | N/A   |       |
-+---------------+-------+-------+-------+-------+-------+-------+-------+
-| Timer         | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   |       |
-+---------------+-------+-------+-------+-------+-------+-------+-------+
-| Temp. Sensor  | N/A   | Yes   | Yes   | Yes   | Yes   | Yes   |       |
-+---------------+-------+-------+-------+-------+-------+-------+-------+
-| Touch         | Yes   | Yes   | N/A   | Yes   | N/A   | N/A   |       |
-+---------------+-------+-------+-------+-------+-------+-------+-------+
-| TWAI          | No    | No    | No    | No    | No    | No    |       |
-+---------------+-------+-------+-------+-------+-------+-------+-------+
-| UART          | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   |       |
-+---------------+-------+-------+-------+-------+-------+-------+-------+
-| USB           | N/A   | Yes   | Yes   | Yes   | Yes   | Yes   | (**)  |
-+---------------+-------+-------+-------+-------+-------+-------+-------+
-| Wi-Fi         | Yes   | Yes   | Yes   | Yes   | Yes   | N/A   |       |
-+---------------+-------+-------+-------+-------+-------+-------+-------+
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| Peripheral    | ESP32 | C3    | C6    | H2    | P4    | S2    | S3    | Notes |
++===============+=======+=======+=======+=======+=======+=======+=======+=======+
+| ADC           | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   |  (1)  |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| BT Classic    | Yes   | N/A   | N/A   | N/A   | N/A   | N/A   | N/A   |       |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| BLE           | Yes   | Yes   | Yes   | Yes   | No    | N/A   | Yes   |       |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| DAC           | Yes   | N/A   | N/A   | N/A   | Yes   | Yes   | N/A   |       |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| Ethernet      | Yes   | N/A   | N/A   | N/A   | Yes   | N/A   | N/A   |  (2)  |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| GPIO          | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   |       |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| Hall Sensor   | N/A   | N/A   | N/A   | N/A   | N/A   | N/A   | N/A   |       |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| I2C           | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   |       |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| I2S           | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   |       |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| LEDC          | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   |       |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| MIPI          | N/A   | N/A   | N/A   | N/A   | No    | N/A   | N/A   |       |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| Motor PWM     | No    | N/A   | N/A   | N/A   | N/A   | N/A   | N/A   |       |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| MSPI          | N/A   | N/A   | N/A   | N/A   | No    | N/A   | N/A   |       |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| Pulse Counter | No    | No    | No    | No    | No    | No    | No    |       |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| RMT           | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   |       |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| SDIO          | No    | No    | No    | No    | No    | No    | No    |       |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| SDMMC         | Yes   | N/A   | N/A   | N/A   | N/A   | N/A   | Yes   |       |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| Timer         | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   |       |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| Temp. Sensor  | N/A   | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   |       |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| Touch         | Yes   | N/A   | N/A   | N/A   | Yes   | Yes   | Yes   |       |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| TWAI          | No    | No    | No    | No    | No    | No    | No    |       |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| UART          | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   |       |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| USB           | N/A   | Yes   | Yes   | Yes   | Yes   | Yes   | Yes   |  (3)  |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
+| Wi-Fi         | Yes   | Yes   | Yes   | N/A   | Yes   | Yes   | Yes   |  (4)  |
++---------------+-------+-------+-------+-------+-------+-------+-------+-------+
 
 Notes
 ^^^^^
 
-(*) SPI Ethernet is supported by all ESP32 families and RMII only for ESP32.
+(1) ESP32-P4 calibration schemes not supported yet in IDF and ADC Continuous also lacks IDF support.
 
-(**) ESP32-C3, C6, H2 only support USB CDC/JTAG
+(2) SPI Ethernet is supported by all ESP32 families and RMII only for ESP32 and ESP32-P4.
+
+(3) ESP32-C3, C6, H2 only support USB CDC/JTAG
+
+(4) ESP32-P4 only supports Wi-Fi through another SoC by using ``esp_hosted``.
 
 .. note:: Some peripherals are not available for all ESP32 families. To see more details about it, see the corresponding SoC at `Product Selector <https://products.espressif.com>`_ page.
 
diff --git a/idf_component.yml b/idf_component.yml
index 9c6bd159d42..967c4ecf0f6 100644
--- a/idf_component.yml
+++ b/idf_component.yml
@@ -44,7 +44,7 @@ files:
     - "platform.txt"
     - "programmers.txt"
 dependencies:
-  idf: ">=5.3,<5.4"
+  idf: ">=5.3,<5.5"
   # mdns 1.2.1 is necessary to build H2 with no WiFi
   espressif/mdns:
     version: "^1.2.3"
@@ -52,12 +52,12 @@ dependencies:
   espressif/esp_modem:
     version: "^1.1.0"
   espressif/esp-zboss-lib:
-    version: "==1.6.0"
+    version: "==1.6.3"
     require: public
     rules:
       - if: "target not in [esp32c2, esp32p4]"
   espressif/esp-zigbee-lib:
-    version: "==1.6.0"
+    version: "==1.6.3"
     require: public
     rules:
       - if: "target not in [esp32c2, esp32p4]"
@@ -69,7 +69,7 @@ dependencies:
   espressif/network_provisioning:
     version: "1.0.2"
   espressif/esp_rainmaker:
-    version: "1.5.0"
+    version: "1.5.2"
     rules:
       - if: "target not in [esp32c2, esp32p4]"
   espressif/rmaker_common:
@@ -77,16 +77,16 @@ dependencies:
     rules:
       - if: "target not in [esp32c2, esp32p4]"
   espressif/esp_insights:
-    version: "1.0.1"
+    version: "1.2.2"
     rules:
       - if: "target not in [esp32c2, esp32p4]"
   # New version breaks esp_insights 1.0.1
   espressif/esp_diag_data_store:
-    version: "1.0.1"
+    version: "1.0.2"
     rules:
       - if: "target not in [esp32c2, esp32p4]"
   espressif/esp_diagnostics:
-    version: "1.0.2"
+    version: "1.2.1"
     rules:
       - if: "target not in [esp32c2, esp32p4]"
   espressif/cbor:
diff --git a/libraries/ArduinoOTA/library.properties b/libraries/ArduinoOTA/library.properties
index bcccbe56b5e..0796eddf318 100644
--- a/libraries/ArduinoOTA/library.properties
+++ b/libraries/ArduinoOTA/library.properties
@@ -1,5 +1,5 @@
 name=ArduinoOTA
-version=3.1.3
+version=3.2.0
 author=Ivan Grokhotkov and Hristo Gochkov
 maintainer=Hristo Gochkov <hristo@espressif.com>
 sentence=Enables Over The Air upgrades, via wifi and espota.py UDP request/TCP download.
diff --git a/libraries/AsyncUDP/library.properties b/libraries/AsyncUDP/library.properties
index 38543425ee1..116dcbacaa8 100644
--- a/libraries/AsyncUDP/library.properties
+++ b/libraries/AsyncUDP/library.properties
@@ -1,5 +1,5 @@
 name=ESP32 Async UDP
-version=3.1.3
+version=3.2.0
 author=Me-No-Dev
 maintainer=Me-No-Dev
 sentence=Async UDP Library for ESP32
diff --git a/libraries/BLE/library.properties b/libraries/BLE/library.properties
index 12da8222e0c..7ef636223ec 100644
--- a/libraries/BLE/library.properties
+++ b/libraries/BLE/library.properties
@@ -1,5 +1,5 @@
 name=BLE
-version=3.1.3
+version=3.2.0
 author=Neil Kolban <kolban1@kolban.com>
 maintainer=Dariusz Krempa <esp32@esp32.eu.org>
 sentence=BLE functions for ESP32
diff --git a/libraries/BLE/src/BLEAdvertising.cpp b/libraries/BLE/src/BLEAdvertising.cpp
index 2d71c4d7478..fe39a69c206 100644
--- a/libraries/BLE/src/BLEAdvertising.cpp
+++ b/libraries/BLE/src/BLEAdvertising.cpp
@@ -183,7 +183,7 @@ void BLEAdvertising::setScanFilter(bool scanRequestWhitelistOnly, bool connectWh
  * @brief Set the advertisement data that is to be published in a regular advertisement.
  * @param [in] advertisementData The data to be advertised.
  */
-void BLEAdvertising::setAdvertisementData(BLEAdvertisementData &advertisementData) {
+bool BLEAdvertising::setAdvertisementData(BLEAdvertisementData &advertisementData) {
   log_v(">> setAdvertisementData");
   esp_err_t errRc = ::esp_ble_gap_config_adv_data_raw((uint8_t *)advertisementData.getPayload().c_str(), advertisementData.getPayload().length());
   if (errRc != ESP_OK) {
@@ -191,13 +191,14 @@ void BLEAdvertising::setAdvertisementData(BLEAdvertisementData &advertisementDat
   }
   m_customAdvData = true;  // Set the flag that indicates we are using custom advertising data.
   log_v("<< setAdvertisementData");
+  return ESP_OK == errRc;
 }  // setAdvertisementData
 
 /**
  * @brief Set the advertisement data that is to be published in a scan response.
  * @param [in] advertisementData The data to be advertised.
  */
-void BLEAdvertising::setScanResponseData(BLEAdvertisementData &advertisementData) {
+bool BLEAdvertising::setScanResponseData(BLEAdvertisementData &advertisementData) {
   log_v(">> setScanResponseData");
   esp_err_t errRc = ::esp_ble_gap_config_scan_rsp_data_raw((uint8_t *)advertisementData.getPayload().c_str(), advertisementData.getPayload().length());
   if (errRc != ESP_OK) {
@@ -205,6 +206,7 @@ void BLEAdvertising::setScanResponseData(BLEAdvertisementData &advertisementData
   }
   m_customScanResponseData = true;  // Set the flag that indicates we are using custom scan response data.
   log_v("<< setScanResponseData");
+  return ESP_OK == errRc;
 }  // setScanResponseData
 
 /**
@@ -212,7 +214,7 @@ void BLEAdvertising::setScanResponseData(BLEAdvertisementData &advertisementData
  * Start advertising.
  * @return N/A.
  */
-void BLEAdvertising::start() {
+bool BLEAdvertising::start() {
   log_v(">> start: customAdvData: %d, customScanResponseData: %d", m_customAdvData, m_customScanResponseData);
 
   // We have a vector of service UUIDs that we wish to advertise.  In order to use the
@@ -225,7 +227,7 @@ void BLEAdvertising::start() {
     m_advData.p_service_uuid = (uint8_t *)malloc(m_advData.service_uuid_len);
     if (!m_advData.p_service_uuid) {
       log_e(">> start failed: out of memory");
-      return;
+      return false;
     }
 
     uint8_t *p = m_advData.p_service_uuid;
@@ -250,7 +252,7 @@ void BLEAdvertising::start() {
     errRc = ::esp_ble_gap_config_adv_data(&m_advData);
     if (errRc != ESP_OK) {
       log_e("<< esp_ble_gap_config_adv_data: rc=%d %s", errRc, GeneralUtils::errorToString(errRc));
-      return;
+      return false;
     }
   }
 
@@ -266,7 +268,7 @@ void BLEAdvertising::start() {
     errRc = ::esp_ble_gap_config_adv_data(&m_scanRespData);
     if (errRc != ESP_OK) {
       log_e("<< esp_ble_gap_config_adv_data (Scan response): rc=%d %s", errRc, GeneralUtils::errorToString(errRc));
-      return;
+      return false;
     }
   }
 
@@ -279,9 +281,10 @@ void BLEAdvertising::start() {
   errRc = ::esp_ble_gap_start_advertising(&m_advParams);
   if (errRc != ESP_OK) {
     log_e("<< esp_ble_gap_start_advertising: rc=%d %s", errRc, GeneralUtils::errorToString(errRc));
-    return;
+  } else {
+    log_v("<< start");
   }
-  log_v("<< start");
+  return ESP_OK == errRc;
 }  // start
 
 /**
@@ -289,14 +292,15 @@ void BLEAdvertising::start() {
  * Stop advertising.
  * @return N/A.
  */
-void BLEAdvertising::stop() {
+bool BLEAdvertising::stop() {
   log_v(">> stop");
   esp_err_t errRc = ::esp_ble_gap_stop_advertising();
   if (errRc != ESP_OK) {
     log_e("esp_ble_gap_stop_advertising: rc=%d %s", errRc, GeneralUtils::errorToString(errRc));
-    return;
+  } else {
+    log_v("<< stop");
   }
-  log_v("<< stop");
+  return ESP_OK == errRc;
 }  // stop
 
 /**
@@ -305,17 +309,17 @@ void BLEAdvertising::stop() {
  * @param [in] Bluetooth address type.
  * Set BLE address.
  */
-
-void BLEAdvertising::setDeviceAddress(esp_bd_addr_t addr, esp_ble_addr_type_t type) {
+bool BLEAdvertising::setDeviceAddress(esp_bd_addr_t addr, esp_ble_addr_type_t type) {
   log_v(">> setPrivateAddress");
 
   m_advParams.own_addr_type = type;
   esp_err_t errRc = esp_ble_gap_set_rand_addr((uint8_t *)addr);
   if (errRc != ESP_OK) {
     log_e("esp_ble_gap_set_rand_addr: rc=%d %s", errRc, GeneralUtils::errorToString(errRc));
-    return;
+  } else {
+    log_v("<< setPrivateAddress");
   }
-  log_v("<< setPrivateAddress");
+  return ESP_OK == errRc;
 }  // setPrivateAddress
 
 /**
diff --git a/libraries/BLE/src/BLEAdvertising.h b/libraries/BLE/src/BLEAdvertising.h
index 9da70a3d9ca..1e573ac814f 100644
--- a/libraries/BLE/src/BLEAdvertising.h
+++ b/libraries/BLE/src/BLEAdvertising.h
@@ -54,18 +54,18 @@ class BLEAdvertising {
   bool removeServiceUUID(int index);
   bool removeServiceUUID(BLEUUID serviceUUID);
   bool removeServiceUUID(const char *serviceUUID);
-  void start();
-  void stop();
+  bool start();
+  bool stop();
   void setAppearance(uint16_t appearance);
   void setAdvertisementType(esp_ble_adv_type_t adv_type);
   void setAdvertisementChannelMap(esp_ble_adv_channel_t channel_map);
   void setMaxInterval(uint16_t maxinterval);
   void setMinInterval(uint16_t mininterval);
-  void setAdvertisementData(BLEAdvertisementData &advertisementData);
+  bool setAdvertisementData(BLEAdvertisementData &advertisementData);
   void setScanFilter(bool scanRequestWhitelistOnly, bool connectWhitelistOnly);
-  void setScanResponseData(BLEAdvertisementData &advertisementData);
+  bool setScanResponseData(BLEAdvertisementData &advertisementData);
   void setPrivateAddress(esp_ble_addr_type_t type = BLE_ADDR_TYPE_RANDOM);
-  void setDeviceAddress(esp_bd_addr_t addr, esp_ble_addr_type_t type = BLE_ADDR_TYPE_RANDOM);
+  bool setDeviceAddress(esp_bd_addr_t addr, esp_ble_addr_type_t type = BLE_ADDR_TYPE_RANDOM);
 
   void handleGAPEvent(esp_gap_ble_cb_event_t event, esp_ble_gap_cb_param_t *param);
   void setMinPreferred(uint16_t);
diff --git a/libraries/BluetoothSerial/library.properties b/libraries/BluetoothSerial/library.properties
index 1cdb6302a8a..0a382410bba 100644
--- a/libraries/BluetoothSerial/library.properties
+++ b/libraries/BluetoothSerial/library.properties
@@ -1,5 +1,5 @@
 name=BluetoothSerial
-version=3.1.3
+version=3.2.0
 author=Evandro Copercini
 maintainer=Evandro Copercini
 sentence=Simple UART to Classical Bluetooth bridge for ESP32
diff --git a/libraries/DNSServer/library.properties b/libraries/DNSServer/library.properties
index 7531b2e52cd..5e70a6ec03a 100644
--- a/libraries/DNSServer/library.properties
+++ b/libraries/DNSServer/library.properties
@@ -1,5 +1,5 @@
 name=DNSServer
-version=3.1.3
+version=3.2.0
 author=Kristijan Novoselić
 maintainer=Kristijan Novoselić, <kristijan.novoselic@gmail.com>
 sentence=A simple DNS server for ESP32.
diff --git a/libraries/EEPROM/library.properties b/libraries/EEPROM/library.properties
index 4eab97edf9a..c7e48501c04 100644
--- a/libraries/EEPROM/library.properties
+++ b/libraries/EEPROM/library.properties
@@ -1,5 +1,5 @@
 name=EEPROM
-version=3.1.3
+version=3.2.0
 author=Ivan Grokhotkov
 maintainer=Paolo Becchi <pbecchi@aerobusiness.it>
 sentence=Enables reading and writing data a sequential, addressable FLASH storage
diff --git a/libraries/ESP32/examples/Camera/CameraWebServer/camera_index.h b/libraries/ESP32/examples/Camera/CameraWebServer/camera_index.h
index 07e2d661821..b38e2773af3 100644
--- a/libraries/ESP32/examples/Camera/CameraWebServer/camera_index.h
+++ b/libraries/ESP32/examples/Camera/CameraWebServer/camera_index.h
@@ -1,260 +1,265 @@
 
-//File: index_ov2640.html.gz, Size: 6578
-#define index_ov2640_html_gz_len 6578
+//File: index_ov2640.html.gz, Size: 6687
+#define index_ov2640_html_gz_len 6687
 const unsigned char index_ov2640_html_gz[] = {
-  0x1F, 0x8B, 0x08, 0x08, 0x99, 0xA8, 0x7B, 0x67, 0x00, 0x03, 0x69, 0x6E, 0x64, 0x65, 0x78, 0x5F, 0x6F, 0x76, 0x32, 0x36, 0x34, 0x30, 0x2E, 0x68, 0x74, 0x6D,
-  0x6C, 0x00, 0xED, 0x3D, 0x6B, 0x73, 0xDB, 0x46, 0x92, 0xDF, 0xFD, 0x2B, 0x60, 0x24, 0x6B, 0x92, 0x65, 0x92, 0x22, 0x29, 0x4A, 0x96, 0x15, 0x89, 0x3E, 0x5B,
-  0x56, 0x6C, 0xD7, 0xDA, 0x89, 0xD7, 0x4A, 0x1C, 0x6F, 0xA5, 0xB6, 0x6C, 0x10, 0x18, 0x92, 0x88, 0x41, 0x80, 0x0B, 0x80, 0xA2, 0x98, 0x94, 0x7E, 0xC7, 0xFD,
-  0xA0, 0xFB, 0x63, 0xD7, 0x3D, 0x0F, 0x60, 0x00, 0x0C, 0x5E, 0xA4, 0x4C, 0x7A, 0x7D, 0x47, 0xA7, 0x22, 0x3C, 0x7A, 0x7A, 0xFA, 0xDD, 0x3D, 0x33, 0x18, 0xE0,
-  0xEC, 0xBE, 0xE5, 0x99, 0xE1, 0x7A, 0x41, 0xB4, 0x59, 0x38, 0x77, 0x46, 0xF7, 0xCE, 0xD8, 0x1F, 0x0D, 0x7E, 0x67, 0x33, 0x62, 0x58, 0xEC, 0x90, 0x9E, 0xCE,
-  0x49, 0x68, 0x68, 0xE6, 0xCC, 0xF0, 0x03, 0x12, 0x9E, 0xEB, 0xCB, 0x70, 0xD2, 0x39, 0xD1, 0xD3, 0xB7, 0x5D, 0x63, 0x4E, 0xCE, 0xF5, 0x6B, 0x9B, 0xAC, 0x16,
-  0x9E, 0x1F, 0xEA, 0x9A, 0xE9, 0xB9, 0x21, 0x71, 0x01, 0x7C, 0x65, 0x5B, 0xE1, 0xEC, 0xDC, 0x22, 0xD7, 0xB6, 0x49, 0x3A, 0xF4, 0xA4, 0x6D, 0xBB, 0x76, 0x68,
-  0x1B, 0x4E, 0x27, 0x30, 0x0D, 0x87, 0x9C, 0xF7, 0x65, 0x5C, 0xA1, 0x1D, 0x3A, 0x64, 0x74, 0x79, 0xF5, 0xF6, 0x70, 0xA0, 0xFD, 0xFC, 0x7E, 0x30, 0x3C, 0xEE,
-  0x9D, 0x1D, 0xB0, 0x6B, 0x31, 0x4C, 0x10, 0xAE, 0xE5, 0x73, 0xFC, 0x8D, 0x3D, 0x6B, 0xAD, 0xFD, 0x95, 0xB8, 0x84, 0xBF, 0x09, 0x10, 0xD1, 0x99, 0x18, 0x73,
-  0xDB, 0x59, 0x9F, 0x6A, 0x4F, 0x7D, 0xE8, 0xB3, 0xFD, 0x92, 0x38, 0xD7, 0x24, 0xB4, 0x4D, 0xA3, 0x1D, 0x18, 0x6E, 0xD0, 0x09, 0x88, 0x6F, 0x4F, 0x7E, 0xC8,
-  0x34, 0x1C, 0x1B, 0xE6, 0xE7, 0xA9, 0xEF, 0x2D, 0x5D, 0xEB, 0x54, 0xFB, 0xAE, 0x7F, 0x82, 0xFF, 0xB2, 0x40, 0xA6, 0xE7, 0x78, 0x3E, 0xDC, 0xBF, 0xFC, 0x11,
-  0xFF, 0x65, 0xEF, 0xD3, 0xDE, 0x03, 0xFB, 0x4F, 0x72, 0xAA, 0xF5, 0x8F, 0x17, 0x37, 0x89, 0xFB, 0xB7, 0xF7, 0x12, 0xA7, 0xB3, 0x41, 0x1E, 0xF5, 0xBC, 0xFD,
-  0x49, 0x71, 0xFB, 0x80, 0x98, 0xA1, 0xED, 0xB9, 0xDD, 0xB9, 0x61, 0xBB, 0x0A, 0x4C, 0x96, 0x1D, 0x2C, 0x1C, 0x03, 0x64, 0x30, 0x71, 0x48, 0x21, 0x9E, 0xEF,
-  0xE6, 0xC4, 0x5D, 0xB6, 0x4B, 0xB0, 0x21, 0x92, 0x8E, 0x65, 0xFB, 0x0C, 0xEA, 0x14, 0xE5, 0xB0, 0x9C, 0xBB, 0xA5, 0x68, 0x8B, 0xE8, 0x72, 0x3D, 0x97, 0x28,
-  0x04, 0x88, 0x1D, 0xAD, 0x7C, 0x63, 0x81, 0x00, 0xF8, 0x37, 0x0B, 0x32, 0xB7, 0x5D, 0x66, 0x54, 0xA7, 0xDA, 0xE1, 0xB0, 0xB7, 0xB8, 0x29, 0x51, 0xE5, 0xE1,
-  0x31, 0xFE, 0xCB, 0x02, 0x2D, 0x0C, 0xCB, 0xB2, 0xDD, 0xE9, 0xA9, 0x76, 0xA2, 0x44, 0xE1, 0xF9, 0x16, 0xF1, 0x3B, 0xBE, 0x61, 0xD9, 0xCB, 0xE0, 0x54, 0x1B,
-  0xAA, 0x60, 0xE6, 0x86, 0x3F, 0x05, 0x5A, 0x42, 0x0F, 0x88, 0xED, 0xF4, 0x95, 0x94, 0x70, 0x10, 0xDF, 0x9E, 0xCE, 0x42, 0x50, 0x69, 0x06, 0x26, 0x2D, 0x34,
-  0xEE, 0x42, 0x65, 0xFA, 0x2C, 0x94, 0x9B, 0x5A, 0x6A, 0x86, 0x63, 0x4F, 0xDD, 0x8E, 0x1D, 0x92, 0x39, 0xB0, 0x13, 0x84, 0x3E, 0x09, 0xCD, 0x59, 0x11, 0x29,
-  0x13, 0x7B, 0xBA, 0xF4, 0x89, 0x82, 0x90, 0x48, 0x6E, 0x05, 0x0C, 0xC3, 0xCD, 0xEC, 0xAD, 0xCE, 0x8A, 0x8C, 0x3F, 0xDB, 0x61, 0x87, 0xCB, 0x64, 0x4C, 0x26,
-  0x9E, 0x4F, 0x94, 0x90, 0x02, 0xC2, 0xF1, 0xCC, 0xCF, 0x9D, 0x20, 0x34, 0xFC, 0xB0, 0x0A, 0x42, 0x63, 0x12, 0x12, 0xBF, 0x1C, 0x1F, 0x41, 0xAB, 0x28, 0xC7,
-  0x96, 0xDF, 0x2D, 0x07, 0xB0, 0x5D, 0xC7, 0x76, 0x49, 0x75, 0xF2, 0xF2, 0xFA, 0x4D, 0xA2, 0x63, 0x50, 0x15, 0x14, 0x63, 0xCF, 0xA7, 0x45, 0x56, 0x42, 0x79,
-  0xCD, 0x76, 0xC6, 0xFD, 0xA6, 0xDF, 0xEB, 0xFD, 0x2D, 0x7B, 0x73, 0x46, 0x98, 0x99, 0x1A, 0xCB, 0xD0, 0xDB, 0xDE, 0x23, 0x32, 0x6E, 0x95, 0xE2, 0xE3, 0xBF,
-  0xE6, 0xC4, 0xB2, 0x0D, 0xAD, 0x29, 0xB9, 0xF3, 0x49, 0x0F, 0x6C, 0xAA, 0xA5, 0x19, 0xAE, 0xA5, 0x35, 0x3D, 0xDF, 0x06, 0x47, 0x30, 0x68, 0xB8, 0x71, 0xE0,
-  0x0A, 0x24, 0x8E, 0x05, 0x69, 0x29, 0x58, 0x2E, 0xF0, 0x19, 0x59, 0x22, 0x6A, 0xB7, 0xC1, 0x5F, 0x85, 0x90, 0x83, 0xBF, 0x52, 0x07, 0x52, 0xF0, 0x48, 0xD1,
-  0x17, 0xE9, 0x4B, 0xA6, 0x30, 0x4F, 0x67, 0xF8, 0x9B, 0x1B, 0x37, 0x9D, 0x42, 0xDD, 0x09, 0x20, 0xA1, 0x43, 0x48, 0xB3, 0x66, 0x13, 0x40, 0xAF, 0x67, 0x5A,
-  0x47, 0xC3, 0x28, 0xD9, 0x52, 0xB7, 0xE1, 0x48, 0xD5, 0x2A, 0xC7, 0x9F, 0x6C, 0x14, 0x35, 0xD8, 0x55, 0xB3, 0x1A, 0xC7, 0x0E, 0xF6, 0x4F, 0x65, 0x43, 0x8C,
-  0x93, 0xDC, 0x28, 0x82, 0xBF, 0xEA, 0x91, 0x24, 0x46, 0x56, 0x1A, 0x4D, 0x14, 0x88, 0xF3, 0x23, 0x4A, 0x06, 0x6F, 0x9E, 0x77, 0x2B, 0xB0, 0x16, 0x93, 0x50,
-  0x35, 0xBA, 0x28, 0x10, 0x17, 0xD1, 0x50, 0x1A, 0x65, 0xF0, 0x77, 0x5B, 0xA1, 0xDE, 0xF8, 0x6E, 0xBC, 0x0C, 0x43, 0xCF, 0x0D, 0xB6, 0x4A, 0x51, 0x79, 0x7E,
-  0xF6, 0xC7, 0x32, 0x08, 0xED, 0xC9, 0xBA, 0xC3, 0x5D, 0x1A, 0xFC, 0x6C, 0x61, 0x40, 0x09, 0x39, 0x26, 0xE1, 0x8A, 0x90, 0xE2, 0x72, 0xC3, 0x35, 0xAE, 0x21,
-  0xEE, 0x4C, 0xA7, 0x8E, 0xCA, 0xF6, 0xCC, 0xA5, 0x1F, 0x60, 0xDD, 0xB6, 0xF0, 0x6C, 0x40, 0xEC, 0x67, 0x3B, 0x4E, 0xFA, 0x60, 0xC5, 0x8E, 0x3A, 0xE6, 0x58,
-  0xD1, 0x97, 0xB7, 0x0C, 0x51, 0xC6, 0x4A, 0x4D, 0x78, 0xC0, 0x8E, 0x1D, 0xAE, 0x95, 0xF7, 0xB8, 0x27, 0x2A, 0xEE, 0x08, 0x17, 0x2C, 0x4C, 0x0B, 0x49, 0xBA,
-  0x4E, 0xCD, 0x19, 0x31, 0x3F, 0x13, 0xEB, 0x61, 0x69, 0x19, 0x56, 0x56, 0x1E, 0x76, 0x6D, 0x77, 0xB1, 0x0C, 0x3B, 0x58, 0x4E, 0x2D, 0xBE, 0x88, 0xCE, 0xA9,
-  0x41, 0x0A, 0x16, 0x07, 0x83, 0xA2, 0xA2, 0xE2, 0x68, 0x71, 0x53, 0x2C, 0x04, 0x99, 0xD8, 0x91, 0x63, 0x8C, 0x89, 0x53, 0x44, 0x32, 0x77, 0x86, 0x9C, 0xB0,
-  0xCB, 0x63, 0x55, 0x7E, 0xED, 0x46, 0x29, 0x8B, 0x93, 0xD7, 0xF0, 0xD1, 0xDF, 0x2A, 0xCB, 0x91, 0x1E, 0xB7, 0x13, 0x97, 0x02, 0xE2, 0x80, 0x83, 0xE5, 0x95,
-  0xDE, 0x00, 0xB3, 0x02, 0x1A, 0x0A, 0x3B, 0xF0, 0x0D, 0x77, 0x4A, 0x20, 0x16, 0xDC, 0xB4, 0xC5, 0x61, 0xF1, 0xC0, 0xA0, 0x12, 0xFB, 0x18, 0xAA, 0x8F, 0x8A,
-  0x07, 0x22, 0x2C, 0x20, 0xB4, 0xB5, 0x2E, 0x3B, 0xD8, 0xA0, 0x2A, 0x91, 0xF4, 0x5B, 0x48, 0x48, 0x5F, 0x69, 0x1D, 0xAC, 0x30, 0x51, 0x7A, 0x4E, 0xD2, 0xB6,
-  0x94, 0x85, 0x7E, 0x69, 0x68, 0x10, 0x43, 0xBE, 0xC9, 0xA4, 0x6C, 0xD0, 0x38, 0x99, 0x1C, 0xF6, 0x0E, 0x87, 0xA5, 0x95, 0x93, 0x92, 0xCB, 0xD4, 0xC0, 0x51,
-  0x11, 0x3A, 0xA2, 0xB0, 0x52, 0x68, 0x04, 0x81, 0x71, 0xAD, 0x2C, 0xDA, 0xBD, 0xC0, 0x66, 0x23, 0x37, 0x63, 0x1C, 0xC0, 0xD8, 0x2D, 0x54, 0x0C, 0xBD, 0xB8,
-  0xA1, 0x0F, 0x94, 0xF4, 0xD1, 0x92, 0x4E, 0xE9, 0x02, 0x42, 0xBC, 0x6A, 0xB2, 0x13, 0x1A, 0x50, 0x83, 0x48, 0x0A, 0x56, 0x16, 0x95, 0x21, 0xB9, 0x09, 0x3B,
-  0x16, 0x31, 0x3D, 0x9F, 0x55, 0x83, 0x39, 0x23, 0xC7, 0x94, 0x22, 0xCB, 0x2D, 0xF6, 0x74, 0xE6, 0x5D, 0x13, 0x5F, 0x21, 0xAC, 0x94, 0x52, 0x87, 0x8F, 0x87,
-  0x56, 0x05, 0x6C, 0x06, 0xA4, 0x47, 0xA5, 0xEC, 0x93, 0xE8, 0x06, 0x7D, 0x73, 0x50, 0xE8, 0xC7, 0x0C, 0x5D, 0x17, 0x7C, 0xC6, 0x18, 0x3B, 0xC4, 0x2A, 0xC8,
-  0x66, 0x16, 0x99, 0x18, 0x4B, 0x27, 0x2C, 0xB1, 0x4A, 0xA3, 0x87, 0xFF, 0x8A, 0x7A, 0xA4, 0x61, 0xE8, 0x77, 0x9C, 0x17, 0x3A, 0xA7, 0x81, 0xE3, 0x5F, 0x8A,
-  0x3E, 0x45, 0xA9, 0x61, 0x2C, 0x16, 0xC4, 0x00, 0x28, 0x93, 0xE4, 0xE9, 0xA1, 0xD2, 0x10, 0x43, 0x1D, 0xE7, 0x2B, 0x8D, 0xDB, 0x4B, 0x1D, 0x36, 0x2A, 0x1E,
-  0x6B, 0xF1, 0x7C, 0x3A, 0xF1, 0xCC, 0xA5, 0xAA, 0xAA, 0xA9, 0xE6, 0x78, 0x59, 0x7C, 0xA7, 0x42, 0x64, 0x81, 0x63, 0x53, 0xF7, 0x5F, 0xBA, 0x2E, 0x6A, 0xB4,
-  0x13, 0xFA, 0xC0, 0xA6, 0xA2, 0xA3, 0x6A, 0x82, 0xDB, 0x28, 0x86, 0x25, 0x04, 0x9B, 0x37, 0x77, 0x95, 0x0A, 0x53, 0x8A, 0x70, 0x1A, 0x45, 0x5A, 0x0D, 0x62,
-  0x88, 0x6D, 0x09, 0x54, 0xDB, 0xC9, 0x25, 0x9C, 0x2D, 0xE7, 0xAA, 0x3A, 0x4A, 0x74, 0xD6, 0x87, 0xA4, 0xCF, 0xBA, 0xF3, 0xA7, 0x63, 0xA3, 0xD9, 0x6B, 0xF7,
-  0xDA, 0x87, 0xF0, 0x3F, 0xC5, 0x78, 0xA6, 0xD8, 0xB8, 0xB8, 0x78, 0x73, 0x2C, 0x2F, 0x15, 0xA2, 0xCB, 0xA7, 0x95, 0xF2, 0x82, 0x7D, 0xA9, 0x2E, 0xAA, 0x7B,
-  0x52, 0x72, 0x7E, 0xA9, 0xDF, 0x2D, 0xC9, 0xC3, 0x39, 0x26, 0x5D, 0xDF, 0x10, 0x15, 0xD6, 0x52, 0x57, 0xC5, 0x73, 0xEF, 0xCF, 0x0E, 0x2B, 0x42, 0xFE, 0xCF,
-  0x5B, 0xBB, 0x24, 0x8A, 0x6F, 0xDA, 0xD2, 0x6B, 0xCB, 0x25, 0xD8, 0xB7, 0x6D, 0xF4, 0xF2, 0xB5, 0xDE, 0xE1, 0x55, 0x1F, 0x50, 0xE8, 0xC2, 0x18, 0xD4, 0x87,
-  0xC1, 0x68, 0x6E, 0x65, 0x28, 0xC1, 0x6C, 0x20, 0x83, 0x89, 0xED, 0x38, 0x1D, 0xC7, 0x5B, 0x95, 0x57, 0x22, 0xC5, 0x96, 0x9C, 0xB1, 0xD3, 0x72, 0x93, 0xDF,
-  0x94, 0xDA, 0x25, 0x44, 0xAE, 0xFF, 0x08, 0x6A, 0xBF, 0x6D, 0x87, 0x2B, 0x74, 0x8D, 0xCD, 0x12, 0xC5, 0x06, 0xF6, 0xB8, 0x5D, 0x47, 0x95, 0x4C, 0x89, 0x55,
-  0x82, 0xC5, 0xC3, 0x9E, 0x95, 0x1D, 0x9A, 0xB3, 0x0D, 0x86, 0x9E, 0xF1, 0xC0, 0xC8, 0x27, 0x8E, 0x81, 0x15, 0xFC, 0x46, 0x33, 0x14, 0xA5, 0xC3, 0x37, 0xB9,
-  0x79, 0x15, 0x4E, 0xA8, 0xE8, 0xBE, 0x9E, 0xD9, 0xA5, 0x2E, 0xAB, 0x1D, 0xF2, 0x63, 0xB5, 0xDA, 0xAC, 0x4B, 0xCA, 0xFD, 0xA4, 0x67, 0xA8, 0x81, 0x6A, 0x44,
-  0x74, 0x11, 0xB4, 0xA7, 0x3E, 0x59, 0x57, 0x60, 0xA6, 0xCD, 0xFF, 0x9E, 0xB2, 0xF9, 0xE3, 0xCD, 0xA7, 0x4A, 0x68, 0x02, 0xE0, 0x56, 0xD4, 0x1D, 0x06, 0x15,
-  0xBA, 0xCE, 0xEF, 0xB2, 0x8A, 0x3D, 0x46, 0xB3, 0xA3, 0xBA, 0x5E, 0x21, 0xDC, 0x14, 0xA4, 0x50, 0xB5, 0xA9, 0x8A, 0xEC, 0xAB, 0x1E, 0xCF, 0x93, 0x49, 0x98,
-  0xB3, 0xF8, 0x43, 0xEB, 0xD4, 0xC3, 0xE2, 0xE8, 0xD6, 0x91, 0x66, 0x53, 0x4A, 0x23, 0x47, 0x34, 0x89, 0x99, 0x6F, 0x7D, 0x4A, 0xCC, 0x18, 0x3D, 0x6B, 0x23,
-  0xCF, 0x57, 0x89, 0x28, 0x9F, 0xA9, 0x9A, 0x01, 0x66, 0xCE, 0x53, 0x3E, 0xA8, 0x87, 0x7C, 0x68, 0x0E, 0x8E, 0x95, 0x6B, 0x2B, 0x05, 0xC0, 0x45, 0xA4, 0xE5,
-  0xCE, 0x02, 0x66, 0x53, 0x56, 0xEE, 0x00, 0x59, 0x8E, 0x45, 0x4A, 0x45, 0x15, 0x7B, 0x65, 0x51, 0x84, 0xC9, 0xCE, 0x64, 0x15, 0x1A, 0xBB, 0x3D, 0x37, 0xA0,
-  0xEC, 0x45, 0x73, 0x35, 0x00, 0xA3, 0x4A, 0x7F, 0x55, 0xCC, 0x5D, 0x9A, 0x63, 0xED, 0x1F, 0xF7, 0x4A, 0xBA, 0x34, 0x1D, 0x2F, 0xD8, 0x72, 0x02, 0x2C, 0x7F,
-  0xFE, 0x4B, 0x79, 0xA7, 0x52, 0xEA, 0x2E, 0xF4, 0xA9, 0x62, 0x77, 0x4C, 0xC9, 0xBC, 0xDF, 0x53, 0x46, 0xDA, 0xC2, 0x59, 0x4A, 0x3A, 0x83, 0x46, 0xD7, 0x2F,
-  0x4F, 0x35, 0x93, 0xA8, 0xC3, 0x68, 0x72, 0xA2, 0xAE, 0xCA, 0x54, 0x69, 0xA1, 0x1E, 0x66, 0xB6, 0x65, 0x91, 0xC2, 0xB9, 0x60, 0x1C, 0xF3, 0x56, 0x2C, 0x1E,
-  0x90, 0x7E, 0xD5, 0xA4, 0xD4, 0x17, 0x71, 0x8A, 0xC2, 0xC7, 0x1A, 0xFA, 0x5F, 0xDA, 0x63, 0x78, 0xA2, 0xC9, 0x9B, 0x49, 0x4F, 0x96, 0x22, 0x85, 0xA4, 0x2A,
-  0x9D, 0x3B, 0x9A, 0x6B, 0x45, 0x91, 0x81, 0x1C, 0x10, 0x2A, 0x1B, 0xCD, 0x53, 0x54, 0xD1, 0x85, 0x94, 0x2E, 0x5F, 0x5B, 0xE2, 0xCB, 0x80, 0x9D, 0xBC, 0xD5,
-  0x95, 0x3B, 0x5C, 0x6A, 0xA3, 0x16, 0x90, 0xEE, 0x37, 0x57, 0x34, 0x7B, 0xAA, 0x8C, 0x0A, 0x88, 0x8C, 0x52, 0x8C, 0x78, 0xB8, 0x2A, 0x09, 0xB5, 0xA9, 0x73,
-  0x9C, 0x1D, 0x48, 0x4F, 0xC3, 0x9D, 0x1D, 0xC4, 0x0F, 0xEE, 0x9D, 0xE1, 0x23, 0x71, 0xF2, 0x43, 0x73, 0xBC, 0x1F, 0xD3, 0x31, 0x82, 0xE0, 0x5C, 0xC7, 0x47,
-  0xBB, 0xF4, 0xE4, 0x33, 0x74, 0x67, 0x96, 0x7D, 0xAD, 0xD9, 0xD6, 0xB9, 0xEE, 0x78, 0x53, 0x2F, 0x75, 0x8F, 0xDE, 0x67, 0x5A, 0x86, 0x3C, 0x76, 0xAE, 0x27,
-  0xD6, 0x17, 0x75, 0xDA, 0x2A, 0xBE, 0xA4, 0x8F, 0x1E, 0x7C, 0xF7, 0xF8, 0xD1, 0xA3, 0xE3, 0x1F, 0x1E, 0xB8, 0xE3, 0x60, 0xC1, 0xFF, 0xFF, 0x0B, 0x5B, 0x8E,
-  0xFD, 0xF9, 0xFD, 0xE0, 0x78, 0x08, 0xC3, 0x3D, 0x12, 0x86, 0x60, 0x7A, 0xC1, 0xD9, 0x01, 0x45, 0x9A, 0x22, 0xE4, 0x00, 0x28, 0xC9, 0xA1, 0x8D, 0x97, 0x3B,
-  0x2A, 0xF2, 0x04, 0x48, 0x00, 0x19, 0x7C, 0x6C, 0xF8, 0x0A, 0x10, 0x0A, 0xC6, 0x8A, 0x69, 0x1A, 0x4A, 0x74, 0xAA, 0x93, 0xB1, 0x77, 0x93, 0xE6, 0x80, 0x32,
-  0xC5, 0x15, 0xC6, 0xA1, 0x88, 0x95, 0x87, 0x10, 0x9A, 0xD1, 0xE6, 0xB8, 0xB8, 0x0A, 0x30, 0x4A, 0xA0, 0x84, 0x0A, 0x10, 0xF8, 0xC6, 0x74, 0x3E, 0x0B, 0xDD,
-  0xEB, 0x42, 0x29, 0xAE, 0x17, 0xB2, 0x50, 0x99, 0xD3, 0x55, 0x82, 0x55, 0xDE, 0x46, 0x5A, 0x36, 0x64, 0x5C, 0x80, 0x68, 0x3B, 0x14, 0x3B, 0xBB, 0x56, 0x8C,
-  0x89, 0x62, 0x93, 0xF4, 0x2A, 0x1A, 0xEB, 0xA3, 0x0F, 0x17, 0xAF, 0xFF, 0xAE, 0xBD, 0x79, 0xF9, 0xA7, 0x52, 0x43, 0x65, 0x44, 0x61, 0x8C, 0xAE, 0xD0, 0x33,
-  0x6D, 0xC6, 0xF4, 0x21, 0x64, 0xA2, 0x73, 0xCD, 0x50, 0x0C, 0x98, 0xED, 0x1D, 0xE2, 0x4E, 0xC3, 0xD9, 0xB9, 0xDE, 0xD7, 0xF1, 0x91, 0x16, 0x71, 0x36, 0xD0,
-  0x35, 0x8C, 0xDF, 0xF4, 0xE0, 0xDA, 0x70, 0x96, 0x78, 0xD4, 0xAB, 0xC2, 0x6B, 0xD6, 0xB4, 0x94, 0x60, 0x3C, 0xB0, 0x44, 0x32, 0x96, 0x02, 0x71, 0x52, 0xCA,
-  0xFA, 0xE8, 0x8A, 0x84, 0x67, 0x07, 0xEC, 0x56, 0x89, 0xD6, 0x8A, 0xFB, 0x06, 0x4F, 0x66, 0xE6, 0x50, 0x64, 0x42, 0x45, 0x8A, 0x9F, 0xF8, 0xC6, 0x9C, 0xA0,
-  0x54, 0x2A, 0x69, 0x5E, 0xD6, 0x7A, 0xD4, 0x52, 0x1F, 0xBD, 0x23, 0xB4, 0x20, 0x02, 0x32, 0x2A, 0x29, 0xFE, 0x8C, 0xD7, 0xA8, 0x89, 0xFE, 0x23, 0x7B, 0xE6,
-  0x6B, 0x52, 0x1D, 0x83, 0x99, 0x79, 0x05, 0xB9, 0xDF, 0xEF, 0x74, 0xB4, 0xC1, 0x9B, 0xB7, 0x5A, 0xA7, 0x53, 0x01, 0xD8, 0x5B, 0x50, 0x77, 0xE2, 0xFA, 0xEF,
-  0x1F, 0xE9, 0xA3, 0x5F, 0x3F, 0xBC, 0x78, 0xDA, 0x84, 0xBA, 0xB0, 0x77, 0xD3, 0x1F, 0xF4, 0x7A, 0xAD, 0xB3, 0x03, 0x06, 0x52, 0x1F, 0xD7, 0x10, 0xF4, 0x4A,
-  0x71, 0x0D, 0x4E, 0x00, 0x57, 0x6F, 0x30, 0xDC, 0x02, 0xD7, 0xA1, 0x3E, 0x7A, 0xF9, 0x9C, 0x61, 0x7A, 0x34, 0xD8, 0x86, 0xA8, 0x01, 0x78, 0x25, 0xD2, 0x04,
-  0xE4, 0xDC, 0x3C, 0x3A, 0x3E, 0xD9, 0x02, 0x53, 0x1F, 0xD8, 0x7B, 0x0F, 0xA8, 0x4E, 0x40, 0x52, 0xC7, 0x5B, 0x09, 0x0A, 0x9C, 0x0E, 0x11, 0x41, 0x4C, 0xBF,
-  0x19, 0x9E, 0x6C, 0x81, 0xE8, 0x31, 0x08, 0x09, 0x11, 0x01, 0x92, 0x9B, 0xC3, 0x6D, 0xA4, 0x74, 0xA2, 0x8F, 0x2E, 0x5E, 0xFD, 0xD8, 0x1C, 0x02, 0x67, 0x83,
-  0xC7, 0xC7, 0x75, 0xF0, 0x80, 0xED, 0x25, 0x51, 0x3D, 0xD2, 0x47, 0x40, 0x0A, 0x92, 0x23, 0xB0, 0x80, 0x59, 0x32, 0x1B, 0xFD, 0xD5, 0x0D, 0x96, 0x0B, 0x7C,
-  0xD0, 0x9D, 0x58, 0x1A, 0x34, 0xF0, 0xAE, 0x69, 0x56, 0xDB, 0xC0, 0x6A, 0x8F, 0xF5, 0xD1, 0x3F, 0x90, 0x6F, 0xEC, 0x68, 0x30, 0xDC, 0x82, 0x6F, 0xB0, 0x7E,
-  0x68, 0x8F, 0x38, 0x36, 0x46, 0x01, 0x46, 0xFF, 0x92, 0x12, 0x83, 0x88, 0xFA, 0x8F, 0x6A, 0x09, 0x2F, 0x89, 0x09, 0x4C, 0xFE, 0x1F, 0xA8, 0x05, 0x40, 0x72,
-  0xD3, 0x1F, 0x6E, 0xE1, 0x3C, 0x60, 0xF2, 0xE0, 0x38, 0xE0, 0xCD, 0x27, 0x9B, 0x9B, 0x28, 0xD0, 0x42, 0xB9, 0x82, 0xB8, 0x80, 0x61, 0x61, 0x73, 0x62, 0xC0,
-  0xD6, 0x1F, 0x1F, 0xDF, 0x3C, 0x3E, 0xAE, 0x86, 0x00, 0xE3, 0x39, 0xC6, 0xC6, 0xA2, 0x88, 0x5F, 0x9C, 0x10, 0x8A, 0x82, 0xFD, 0xBF, 0x97, 0x30, 0x84, 0x0B,
-  0xD7, 0xB5, 0x43, 0x3D, 0x6F, 0x07, 0x32, 0x61, 0x07, 0xD5, 0xA2, 0xBC, 0x44, 0x49, 0xF4, 0x34, 0x91, 0x3E, 0x1A, 0x56, 0xC8, 0xA6, 0x89, 0x72, 0x8B, 0xB6,
-  0x4D, 0xD0, 0x4F, 0x53, 0x3C, 0x5A, 0x1E, 0x26, 0x77, 0xF0, 0x86, 0x43, 0x5D, 0x8A, 0x2C, 0x1B, 0xA5, 0x11, 0x05, 0xAD, 0xC6, 0x8D, 0x3E, 0x3A, 0x3E, 0x2C,
-  0x4D, 0xBF, 0x9B, 0x2B, 0x63, 0x4C, 0x27, 0x0B, 0x5C, 0x12, 0x04, 0xB5, 0xF5, 0x11, 0x37, 0xD5, 0x47, 0xCF, 0xA2, 0xE3, 0x6D, 0xB4, 0xD2, 0x19, 0x6C, 0xA1,
-  0x16, 0x89, 0x1C, 0xA6, 0x99, 0xCE, 0x80, 0xAB, 0x26, 0x2E, 0xB4, 0xEE, 0x56, 0x31, 0x65, 0xD4, 0x6E, 0xA3, 0x17, 0x1C, 0x2C, 0xF8, 0x46, 0x10, 0xD6, 0xD6,
-  0x8A, 0x68, 0x08, 0xB9, 0x84, 0x1F, 0xED, 0x4D, 0x23, 0x11, 0x29, 0xDF, 0x80, 0x3E, 0x02, 0x23, 0x5C, 0xB2, 0xE7, 0xB6, 0x6A, 0x6B, 0x24, 0x6E, 0x0A, 0xA5,
-  0x4B, 0x74, 0xBC, 0x37, 0xAD, 0x48, 0xE4, 0x7C, 0x0B, 0x7A, 0x59, 0x10, 0xD3, 0x36, 0x9C, 0x8F, 0x64, 0x32, 0x81, 0x84, 0x55, 0x5F, 0x37, 0x89, 0xE6, 0xA0,
-  0x1F, 0x76, 0xAE, 0x5D, 0xD2, 0xF3, 0xDA, 0xE3, 0x88, 0x14, 0xBA, 0xCD, 0x07, 0x13, 0xE9, 0xEC, 0xCD, 0x27, 0xD4, 0x09, 0x1D, 0xBE, 0xB1, 0x23, 0x7D, 0xF4,
-  0x93, 0x17, 0xD1, 0xB9, 0x79, 0x81, 0xF1, 0x13, 0x99, 0xD2, 0xF9, 0xEA, 0x6D, 0xEA, 0x9C, 0x17, 0xBE, 0xB1, 0xA6, 0x1B, 0x22, 0xB7, 0xA9, 0xBA, 0xDE, 0x41,
-  0x3D, 0xFA, 0x8B, 0xED, 0x6E, 0xCE, 0xCC, 0x10, 0x09, 0x21, 0xC4, 0xDD, 0x0E, 0x0B, 0x14, 0xA3, 0xCF, 0xE0, 0x60, 0x3B, 0x24, 0xC7, 0x38, 0xB6, 0x5E, 0xD8,
-  0xC6, 0xD7, 0x50, 0x6E, 0x19, 0xAB, 0x71, 0x6D, 0xB7, 0x80, 0x36, 0xFA, 0xE8, 0xE9, 0x6F, 0xCF, 0x6A, 0x07, 0x29, 0xB6, 0xEA, 0x5B, 0xC5, 0xC2, 0xE3, 0xB9,
-  0x13, 0xEC, 0x2C, 0x33, 0xA9, 0xA5, 0xF6, 0x9C, 0xAA, 0x13, 0x5B, 0x0A, 0xBE, 0x04, 0x81, 0x74, 0x91, 0x4C, 0x97, 0xD8, 0xAC, 0xC6, 0xE3, 0x97, 0x8B, 0x60,
-  0x40, 0xC4, 0xC7, 0xA9, 0x61, 0xD7, 0xCF, 0x2B, 0xA2, 0x21, 0xD5, 0x94, 0xF6, 0x02, 0x8E, 0x76, 0xA5, 0x2E, 0xD6, 0xED, 0xDE, 0x74, 0xC6, 0xB9, 0xDE, 0xB7,
-  0xE2, 0x80, 0x90, 0xB9, 0x67, 0xD5, 0x9F, 0xB2, 0xE2, 0xED, 0xF4, 0x11, 0x68, 0xED, 0x0D, 0x1C, 0xD4, 0xCE, 0x32, 0x02, 0xC1, 0x17, 0x4E, 0x2F, 0x4F, 0x97,
-  0xA1, 0xB7, 0x4D, 0x66, 0xB9, 0x5A, 0xBA, 0xEE, 0x7A, 0x9B, 0xB4, 0x72, 0xE1, 0x78, 0x4B, 0x6B, 0x73, 0x0C, 0x90, 0x53, 0x7E, 0x9E, 0x4C, 0x6C, 0x73, 0xF3,
-  0xAC, 0x84, 0xB3, 0x0A, 0xDE, 0xBC, 0x62, 0xFB, 0x2F, 0x1C, 0xC5, 0x89, 0x59, 0x3F, 0x40, 0x10, 0x13, 0xB4, 0x78, 0x79, 0xA1, 0x5D, 0x5D, 0xFE, 0x74, 0xF5,
-  0xF3, 0xBB, 0xDD, 0x44, 0x07, 0xE8, 0x73, 0x4F, 0x81, 0x01, 0xB9, 0xDD, 0x77, 0x4C, 0x00, 0x22, 0x06, 0x9B, 0xE8, 0x69, 0xC0, 0x14, 0xF5, 0xFC, 0xEA, 0xED,
-  0xAE, 0xB4, 0x34, 0xD8, 0x9F, 0x9A, 0x06, 0x5F, 0x83, 0x9E, 0x3E, 0x3A, 0xE4, 0x9A, 0x38, 0x1B, 0xE8, 0x8A, 0x35, 0x44, 0x7D, 0x69, 0xAF, 0xF1, 0x68, 0x6F,
-  0x03, 0xB9, 0x88, 0x94, 0x6F, 0x60, 0x18, 0x07, 0x56, 0xF1, 0x91, 0x12, 0xBD, 0x89, 0xF3, 0xB0, 0x96, 0xFA, 0xE8, 0xF2, 0x66, 0xE1, 0x05, 0x4B, 0xBF, 0x62,
-  0x42, 0x55, 0x6B, 0xA4, 0xB7, 0x95, 0x42, 0x04, 0x29, 0x4C, 0x23, 0x3D, 0xAE, 0x10, 0x5C, 0xD0, 0x91, 0xD6, 0xFA, 0x86, 0x77, 0xAA, 0x15, 0x44, 0xFE, 0x25,
-  0x15, 0x33, 0xDD, 0x20, 0xEF, 0x4C, 0x31, 0xEF, 0xBC, 0xB8, 0xD8, 0x4D, 0x28, 0x9B, 0xEE, 0x2D, 0xE1, 0x4C, 0xF7, 0x9A, 0x70, 0x34, 0xBE, 0xDE, 0x2E, 0xA4,
-  0xB0, 0xE1, 0x20, 0x82, 0x37, 0x84, 0xB1, 0xF3, 0x26, 0x03, 0x08, 0xC9, 0x73, 0xFA, 0x37, 0xDB, 0xB8, 0x8E, 0x20, 0x23, 0xE9, 0x39, 0x87, 0xB1, 0xDF, 0x1C,
-  0xDD, 0xA9, 0xD7, 0x1C, 0x96, 0x52, 0xBB, 0x8D, 0xD3, 0x20, 0x27, 0x26, 0xB1, 0x1D, 0xDC, 0x76, 0x5D, 0x57, 0x21, 0x52, 0x5B, 0xA6, 0x13, 0xED, 0x82, 0x9D,
-  0x6D, 0xA3, 0x9B, 0xC1, 0x36, 0xBA, 0x91, 0x29, 0x4A, 0xAA, 0xE7, 0xF8, 0x0B, 0x65, 0x1A, 0x5C, 0x37, 0xFB, 0x92, 0x6B, 0x1E, 0x8B, 0xFA, 0x31, 0x0D, 0xDA,
-  0xE8, 0xA3, 0x67, 0x6F, 0x77, 0x13, 0xD3, 0xB0, 0xB3, 0x8A, 0x31, 0x6D, 0xAB, 0x08, 0x46, 0x99, 0xDA, 0x77, 0x29, 0xB6, 0xDA, 0x40, 0x1B, 0x2B, 0x24, 0xFC,
-  0xB7, 0x1D, 0x69, 0x63, 0x55, 0x5D, 0x1B, 0x77, 0x9C, 0x61, 0x56, 0x5F, 0x83, 0x7E, 0x7C, 0x63, 0xF5, 0x71, 0x3A, 0x37, 0x6A, 0xEB, 0x88, 0xB7, 0xD3, 0x47,
-  0xEF, 0x8C, 0x95, 0xF6, 0xE2, 0xCD, 0xD3, 0x9D, 0xE8, 0x4A, 0x74, 0xBA, 0x1F, 0x7D, 0x45, 0x2C, 0xEF, 0x5B, 0x67, 0x0E, 0x71, 0xEB, 0x3B, 0x15, 0x36, 0xD2,
-  0x47, 0xAF, 0x89, 0x1B, 0x68, 0x17, 0x9E, 0xCF, 0x5F, 0x91, 0xB7, 0x13, 0xAD, 0xD1, 0x9E, 0xF7, 0xA3, 0x32, 0xC6, 0xF4, 0xBE, 0xF5, 0x35, 0x9B, 0xDB, 0xBE,
-  0xEF, 0xF9, 0xB5, 0x55, 0xC6, 0xDB, 0xE9, 0xA3, 0x97, 0x9D, 0x37, 0xF4, 0x68, 0x27, 0xEA, 0x12, 0xBD, 0xEE, 0x47, 0x63, 0x11, 0xCF, 0xFB, 0x56, 0xDA, 0xF5,
-  0xC4, 0xB1, 0x17, 0xB5, 0x55, 0x46, 0x5B, 0xE9, 0xA3, 0xF7, 0x9D, 0x1F, 0xE1, 0xEF, 0x4E, 0xD4, 0xC5, 0x7A, 0xDC, 0x8F, 0xB2, 0x38, 0xB7, 0xFB, 0x56, 0x95,
-  0x65, 0xAE, 0x6A, 0x2B, 0x0A, 0xDA, 0xE8, 0xA3, 0xE7, 0x17, 0xBF, 0x69, 0xCD, 0xE7, 0xDE, 0xCA, 0xC5, 0x87, 0x43, 0xB5, 0xCB, 0x9F, 0x5A, 0x3B, 0xD1, 0x18,
-  0x76, 0xBD, 0x1F, 0x7D, 0x51, 0xA6, 0xF7, 0xAD, 0x2D, 0xBA, 0x07, 0x68, 0x6C, 0xD4, 0x0F, 0x87, 0xA2, 0x21, 0x3E, 0xFB, 0x02, 0x47, 0xDA, 0x33, 0x63, 0x37,
-  0x01, 0x31, 0xEA, 0x77, 0x17, 0x45, 0x7B, 0xCC, 0xE4, 0xBE, 0xF5, 0xE4, 0x10, 0xAB, 0x82, 0x8A, 0x92, 0x25, 0x86, 0xF5, 0x11, 0xB7, 0xD3, 0xE0, 0x36, 0xD3,
-  0x35, 0xD4, 0x1A, 0x97, 0xCF, 0xB5, 0x57, 0xE2, 0xB4, 0x02, 0x37, 0x1B, 0xCF, 0xD9, 0xE5, 0x0D, 0x6D, 0x93, 0xF4, 0x24, 0x07, 0xB7, 0x83, 0xA3, 0xA3, 0xED,
-  0x86, 0xB7, 0x79, 0xD3, 0xA8, 0x47, 0x47, 0x5B, 0xEA, 0x44, 0xDE, 0x8C, 0xC1, 0xDF, 0x62, 0x58, 0xE6, 0x24, 0x7C, 0x53, 0x00, 0x1D, 0xCE, 0x93, 0xB0, 0x13,
-  0x84, 0xB6, 0xE3, 0xE8, 0xA3, 0x17, 0x24, 0xD4, 0xAE, 0xF0, 0xB0, 0xE2, 0x2E, 0x00, 0x09, 0x8B, 0xD8, 0x02, 0x14, 0xFA, 0xC4, 0x98, 0xEB, 0xA3, 0x2B, 0x7C,
-  0xBF, 0x23, 0xE0, 0xC2, 0xB3, 0x72, 0x64, 0x95, 0xF7, 0x0B, 0xD0, 0x0D, 0x42, 0xB8, 0xE3, 0x27, 0xF9, 0x3A, 0x56, 0x30, 0x7D, 0xB6, 0xFD, 0x6F, 0x74, 0x16,
-  0x2C, 0x0C, 0x57, 0x80, 0xD1, 0xBD, 0x71, 0x2B, 0xBE, 0xD9, 0x69, 0xEC, 0x39, 0x16, 0x00, 0x3E, 0xB5, 0xAE, 0xF1, 0xD5, 0x34, 0x96, 0x76, 0x15, 0x6D, 0xDB,
-  0xC1, 0x26, 0xE0, 0x3B, 0x02, 0x43, 0x89, 0xB0, 0x67, 0xBE, 0x40, 0xCF, 0x36, 0x58, 0xE1, 0xCB, 0x3C, 0x0A, 0xA4, 0x9D, 0xB3, 0xD3, 0xC8, 0x27, 0xD3, 0xC8,
-  0x84, 0x54, 0x1B, 0xD0, 0x94, 0xFB, 0x8E, 0xDE, 0x91, 0xA9, 0x1D, 0x00, 0x8D, 0x1A, 0xE8, 0xE9, 0x80, 0xEE, 0xD5, 0x60, 0x1E, 0x52, 0x6D, 0x1F, 0x90, 0xDC,
-  0x25, 0xDF, 0xC5, 0xA8, 0xDC, 0xDD, 0x55, 0x2B, 0x85, 0xA4, 0xF7, 0x62, 0x25, 0x31, 0x96, 0x59, 0xE1, 0xFD, 0x4E, 0x67, 0x36, 0xC4, 0x5D, 0x27, 0x9A, 0x60,
-  0xED, 0xEC, 0x60, 0x36, 0x2C, 0x7B, 0xF4, 0xBC, 0x74, 0xCB, 0x10, 0x70, 0xBA, 0xF1, 0x8E, 0x21, 0x94, 0xD2, 0x08, 0xA8, 0x69, 0x6B, 0x6F, 0x8C, 0xE0, 0x73,
-  0x5B, 0x7B, 0x8F, 0x0E, 0xBF, 0xC3, 0x8D, 0x43, 0x48, 0xBB, 0x61, 0x59, 0x7E, 0xEE, 0xE6, 0xA1, 0x61, 0x62, 0xF3, 0xD0, 0xB1, 0xD8, 0x3C, 0x24, 0x4D, 0xBD,
-  0xDD, 0xF4, 0xFB, 0xFD, 0x2A, 0x9C, 0x57, 0xDC, 0x3F, 0x74, 0x27, 0x2C, 0xCD, 0x41, 0x98, 0x15, 0x59, 0x1A, 0x0A, 0x96, 0x86, 0x12, 0x4B, 0x27, 0x77, 0xB9,
-  0x23, 0xEA, 0x4E, 0x38, 0xE2, 0x0B, 0x3B, 0x5F, 0x09, 0x4B, 0x95, 0x36, 0x79, 0x51, 0xDB, 0xBE, 0xAB, 0x3D, 0x5E, 0x14, 0x24, 0x1D, 0x0C, 0x8F, 0x0A, 0x63,
-  0x21, 0x6D, 0xC2, 0x7C, 0xFE, 0xC5, 0x5D, 0xFA, 0xFC, 0x74, 0x0B, 0x9F, 0x9F, 0x66, 0x7C, 0x7E, 0x87, 0xCE, 0x2E, 0x08, 0xFF, 0xC6, 0x1C, 0x5E, 0xB0, 0x55,
-  0xC3, 0xE9, 0x95, 0x6C, 0xED, 0xD6, 0x43, 0x22, 0x4B, 0x78, 0x71, 0x97, 0x1E, 0x92, 0x63, 0xB7, 0x1B, 0x19, 0x29, 0x8F, 0x39, 0xA3, 0xDD, 0xE4, 0x24, 0x5A,
-  0x49, 0xC9, 0xEA, 0xE4, 0xBD, 0xE3, 0xCE, 0xA3, 0xC3, 0x21, 0x2F, 0x9B, 0xEE, 0x42, 0x3D, 0xD5, 0x37, 0x93, 0xE6, 0x82, 0xDC, 0x4D, 0x51, 0x86, 0x1B, 0xDF,
-  0x16, 0x50, 0x07, 0xD7, 0x2E, 0xCC, 0x2E, 0x5E, 0xFF, 0xBD, 0x5E, 0x2D, 0x96, 0xEE, 0x69, 0x77, 0xF5, 0xD8, 0x66, 0xD6, 0x2A, 0x0B, 0x8C, 0xD3, 0x0E, 0x11,
-  0x07, 0xB7, 0x55, 0x0F, 0x3E, 0x44, 0x9C, 0x2B, 0x06, 0xCD, 0x52, 0x50, 0x88, 0x9A, 0xE5, 0x8D, 0x89, 0x69, 0x20, 0xE4, 0x93, 0x18, 0x70, 0x2C, 0xE2, 0x9A,
-  0xE6, 0x4D, 0x26, 0xF4, 0x5B, 0x3D, 0x8F, 0x30, 0x60, 0x04, 0x9F, 0xF1, 0x7A, 0xAF, 0x1F, 0x91, 0xA4, 0x1A, 0x11, 0xC7, 0x14, 0x46, 0xB4, 0x51, 0x13, 0xE3,
-  0x86, 0x76, 0x67, 0x22, 0x38, 0x64, 0x22, 0x78, 0xFE, 0xEA, 0xBD, 0x4A, 0x06, 0xCC, 0xD7, 0x7A, 0x59, 0x11, 0x1C, 0x6E, 0xBE, 0x31, 0xBC, 0x5F, 0x59, 0x5A,
-  0xBD, 0x58, 0x5A, 0x87, 0x93, 0x78, 0xCF, 0xD8, 0x36, 0x21, 0x4B, 0x21, 0x81, 0x23, 0xF6, 0x54, 0xA8, 0xF6, 0x56, 0xF6, 0x80, 0x4A, 0x76, 0x70, 0x54, 0xC7,
-  0x0E, 0xAC, 0xC3, 0x2D, 0xCC, 0xE0, 0x28, 0xC7, 0x0C, 0xEE, 0x4A, 0x06, 0x43, 0x7D, 0xF4, 0x76, 0x13, 0x33, 0x18, 0x56, 0x34, 0x83, 0x43, 0x61, 0x06, 0xF1,
-  0x86, 0xC2, 0x61, 0x55, 0x61, 0x49, 0x56, 0xF0, 0x68, 0x82, 0xEB, 0xE8, 0x8F, 0xAA, 0x79, 0xC2, 0xEE, 0x62, 0xEE, 0xCA, 0x76, 0xEB, 0xC7, 0xDB, 0xDF, 0x6C,
-  0xD7, 0xF2, 0x56, 0xF5, 0x42, 0xAE, 0xDC, 0xD1, 0xD7, 0x1E, 0x6E, 0xEB, 0x8D, 0x5A, 0x71, 0xAA, 0xA5, 0x73, 0x83, 0x95, 0xBD, 0x1B, 0x78, 0xBE, 0x96, 0x7D,
-  0xED, 0x41, 0x62, 0x47, 0x92, 0x80, 0xAE, 0x56, 0x04, 0x64, 0x9F, 0xC1, 0x7E, 0xF5, 0xA3, 0xB6, 0xC1, 0x8E, 0x74, 0x05, 0x32, 0xBE, 0x71, 0x5F, 0xDB, 0x60,
-  0xE7, 0xBE, 0x02, 0x5B, 0xCE, 0x33, 0xEB, 0xF8, 0x16, 0x05, 0x6D, 0xB3, 0xD7, 0x28, 0x94, 0x3E, 0xBE, 0xCD, 0xA0, 0x36, 0x4F, 0x29, 0xD1, 0xB8, 0x8C, 0x79,
-  0x2B, 0xD4, 0x58, 0xD5, 0xF6, 0xDC, 0x52, 0x9C, 0x92, 0x01, 0xF0, 0xE6, 0x37, 0xF4, 0xF1, 0xF6, 0x80, 0x54, 0xDB, 0xA5, 0x96, 0x26, 0xAC, 0x46, 0x65, 0xF8,
-  0xE1, 0x54, 0x0A, 0x66, 0x51, 0xE7, 0x35, 0x83, 0x59, 0x5C, 0xE7, 0x83, 0x31, 0xED, 0x7D, 0xF0, 0xF2, 0x4F, 0x05, 0x4B, 0xEB, 0xCD, 0x59, 0x3A, 0xBC, 0x2B,
-  0x96, 0xB6, 0x48, 0x55, 0x91, 0x75, 0x85, 0x5E, 0x68, 0x38, 0x1B, 0x1B, 0x17, 0x6B, 0x0D, 0xB6, 0xC5, 0x62, 0xAE, 0x76, 0x05, 0xAC, 0xEE, 0xD4, 0xC0, 0x04,
-  0x01, 0xD5, 0x94, 0x31, 0xCC, 0x2A, 0xE3, 0xE4, 0x6B, 0xB3, 0x2F, 0xC6, 0x51, 0x55, 0xF3, 0x52, 0x70, 0x74, 0xFC, 0x35, 0x99, 0x97, 0xB7, 0x0C, 0xF1, 0xEA,
-  0xC6, 0xC1, 0x8B, 0x35, 0xC7, 0xE0, 0x45, 0x8F, 0x76, 0x6F, 0x60, 0x11, 0x05, 0x1B, 0xEB, 0xE3, 0xF0, 0x4E, 0xDF, 0xD7, 0x74, 0x17, 0x11, 0x8C, 0xB1, 0xB4,
-  0x85, 0x89, 0x0D, 0x86, 0x3B, 0x34, 0x31, 0x69, 0x19, 0x89, 0xE7, 0x41, 0x5E, 0xC0, 0xE8, 0x7C, 0x6D, 0x20, 0x2E, 0x68, 0xEA, 0xAC, 0x24, 0xA9, 0xB3, 0xF2,
-  0xD9, 0x01, 0x14, 0x85, 0x59, 0x04, 0x39, 0x74, 0x9E, 0xB1, 0xCF, 0xBE, 0xA9, 0x3B, 0x8C, 0x5F, 0xD3, 0x46, 0xD7, 0xB9, 0xE2, 0x17, 0x82, 0x46, 0x85, 0x66,
-  0xFA, 0x45, 0xA1, 0xA5, 0xAF, 0x44, 0x3B, 0x33, 0xF8, 0x9E, 0xFC, 0x6B, 0xC2, 0x17, 0xE5, 0xB4, 0x99, 0x4F, 0x26, 0xE7, 0xFA, 0x77, 0x11, 0x4E, 0x2E, 0x2D,
-  0x04, 0xD1, 0x35, 0x08, 0xC9, 0xAE, 0xE3, 0x19, 0x58, 0xAC, 0x1A, 0x8B, 0x10, 0x28, 0xED, 0xFE, 0xB1, 0xC0, 0x49, 0x5E, 0x03, 0x37, 0x70, 0x1B, 0xD5, 0xD6,
-  0x71, 0xE9, 0xAB, 0x45, 0xF9, 0x4A, 0x3B, 0x1E, 0x46, 0x8B, 0x78, 0xFF, 0xF3, 0xDF, 0x65, 0x53, 0x33, 0xF8, 0xF1, 0xBF, 0x58, 0x00, 0x60, 0x46, 0xBE, 0x79,
-  0xAE, 0x03, 0xA5, 0xBE, 0x17, 0x40, 0x29, 0x6A, 0x4F, 0xED, 0x1C, 0x55, 0xE5, 0x49, 0xFB, 0x40, 0x25, 0xEE, 0x14, 0xB0, 0x62, 0x6C, 0x72, 0x16, 0x98, 0xBE,
-  0xBD, 0x80, 0x52, 0xCD, 0xF2, 0xCC, 0xE5, 0x9C, 0xB8, 0x61, 0xD7, 0xB0, 0xAC, 0xCB, 0x6B, 0x38, 0x78, 0x8D, 0x33, 0xCC, 0x20, 0xF9, 0x66, 0xE3, 0xF9, 0xCF,
-  0x6F, 0x2E, 0xD8, 0x0B, 0xF7, 0x5E, 0x83, 0xBC, 0x88, 0xD5, 0x68, 0x6B, 0x93, 0xA5, 0xCB, 0xAA, 0xF7, 0x26, 0x41, 0x58, 0xF6, 0x11, 0xC6, 0x6B, 0xC3, 0xD7,
-  0xC6, 0x46, 0x40, 0x5E, 0x7A, 0x41, 0xA8, 0x9D, 0x6B, 0x11, 0x46, 0xC7, 0x33, 0xE9, 0x4B, 0x12, 0xBA, 0x8C, 0x2F, 0x0E, 0xC9, 0x18, 0xFF, 0xD5, 0x77, 0x00,
-  0x34, 0x6A, 0xF5, 0x50, 0x6B, 0x9C, 0x9E, 0xF4, 0x1B, 0x68, 0x7F, 0x51, 0x17, 0x13, 0xFC, 0xAC, 0x22, 0xC0, 0x35, 0x97, 0xBE, 0xD3, 0xD6, 0xCC, 0x71, 0x8B,
-  0xBD, 0x24, 0x91, 0x5E, 0xC6, 0x6B, 0xE2, 0xED, 0xB9, 0xDD, 0x70, 0x46, 0xDC, 0x66, 0x4C, 0x19, 0x38, 0xC3, 0xC2, 0x73, 0x83, 0xC4, 0x17, 0x22, 0xED, 0x49,
-  0x7C, 0xBD, 0x0B, 0x05, 0x7D, 0xB8, 0x0C, 0xB4, 0xFB, 0xE7, 0xE7, 0x1A, 0x16, 0xB8, 0x89, 0x97, 0x2F, 0x9A, 0xE3, 0x34, 0x5C, 0x5B, 0x4B, 0x5D, 0xF8, 0x05,
-  0x42, 0x83, 0xF4, 0x9A, 0xDF, 0x5B, 0x8D, 0x38, 0xA9, 0xF7, 0xCC, 0x46, 0x0D, 0x30, 0x8A, 0x34, 0x5B, 0x49, 0x02, 0x9B, 0x96, 0x11, 0x1A, 0xAD, 0xE4, 0x0B,
-  0x1F, 0xA1, 0x57, 0xA0, 0xA4, 0xAD, 0xD1, 0x5B, 0xF2, 0xDB, 0x27, 0x6F, 0x5B, 0x5D, 0x90, 0x21, 0xF0, 0x1B, 0xB5, 0x26, 0xBE, 0x9F, 0xFE, 0xF4, 0x25, 0xB4,
-  0xEE, 0xF4, 0xDB, 0x1A, 0xDE, 0x49, 0xB6, 0x95, 0x88, 0xBC, 0x27, 0xAE, 0x09, 0xA1, 0x15, 0xA3, 0x55, 0xA0, 0x64, 0xE8, 0x6E, 0x13, 0x2A, 0x82, 0xD8, 0xF3,
-  0x8E, 0x4C, 0x41, 0x62, 0xD3, 0x36, 0x1F, 0x40, 0xB7, 0xE9, 0xE8, 0xB9, 0xCD, 0x82, 0xA2, 0xA4, 0xB5, 0x83, 0x03, 0x70, 0x69, 0x08, 0x4A, 0x04, 0xAC, 0x62,
-  0xDA, 0x6C, 0xF0, 0x05, 0x4C, 0xB0, 0xA8, 0x46, 0xEF, 0xA6, 0xF1, 0x10, 0x10, 0x74, 0x43, 0xEF, 0x2A, 0xF4, 0x6D, 0x77, 0x0A, 0x43, 0x8F, 0x56, 0x8C, 0x8D,
-  0xDE, 0x46, 0x94, 0xA9, 0xFB, 0xF4, 0x3A, 0xED, 0x24, 0x7D, 0xA3, 0xC9, 0xAF, 0x3F, 0x6C, 0xB4, 0x1A, 0x9C, 0x78, 0x7A, 0x0E, 0xE6, 0xD6, 0x64, 0x07, 0x0F,
-  0x28, 0x8D, 0x2D, 0xED, 0xEC, 0x8C, 0x77, 0xC3, 0xA0, 0xF0, 0x22, 0x00, 0xD1, 0x3F, 0xA9, 0x5B, 0x91, 0x29, 0x7E, 0xFA, 0xFE, 0x2F, 0x61, 0xB3, 0xB7, 0x07,
-  0x40, 0xF5, 0x13, 0x9C, 0x41, 0xF8, 0xFE, 0x2F, 0xF8, 0xFF, 0xED, 0x03, 0x3A, 0x6D, 0xF0, 0xFD, 0x5F, 0xF8, 0xE7, 0xF6, 0x01, 0xF4, 0x04, 0xC7, 0xB4, 0xBF,
-  0xDB, 0x4F, 0x54, 0x0E, 0x59, 0xE9, 0x4D, 0x73, 0xA5, 0x17, 0x89, 0xAD, 0x36, 0x4D, 0xD3, 0x02, 0xA2, 0x3E, 0xC5, 0xFE, 0xDB, 0x34, 0x3D, 0x0B, 0xD4, 0x13,
-  0x82, 0x25, 0x0B, 0xA5, 0x3B, 0xA0, 0x12, 0x21, 0xA8, 0xE8, 0x0D, 0xA8, 0xF6, 0x84, 0x42, 0x6A, 0xDC, 0x55, 0x62, 0x03, 0x11, 0x90, 0x0B, 0xFC, 0x2C, 0xF8,
-  0x2B, 0x37, 0x6C, 0x86, 0x09, 0xA7, 0xC8, 0x91, 0xF8, 0x68, 0x94, 0x60, 0x01, 0x7F, 0xD0, 0x0E, 0xE0, 0x1A, 0x5C, 0x69, 0x91, 0xB1, 0xDD, 0x8B, 0xEC, 0x30,
-  0xA6, 0x94, 0xDD, 0xCC, 0xB1, 0xC3, 0x0F, 0xA6, 0xF3, 0xB9, 0x89, 0xEF, 0x64, 0x4C, 0x87, 0x8A, 0x8C, 0x88, 0x10, 0xE8, 0x09, 0xFE, 0x0F, 0xE4, 0x82, 0x7F,
-  0x72, 0xF5, 0x03, 0x58, 0x59, 0x09, 0xDF, 0xA4, 0x53, 0x00, 0x1F, 0x6F, 0xDA, 0x1A, 0x3B, 0x58, 0x83, 0x67, 0xB8, 0x16, 0x9E, 0xE3, 0x9F, 0xB5, 0xD0, 0x1E,
-  0x5E, 0xE0, 0x47, 0x70, 0x8D, 0xD6, 0xAC, 0x78, 0x89, 0x1D, 0x20, 0x14, 0xAD, 0x31, 0x28, 0x14, 0x3B, 0x82, 0x6B, 0xF8, 0xCE, 0x0F, 0xB0, 0xDD, 0xB6, 0x36,
-  0xB6, 0x5D, 0x97, 0x1E, 0x94, 0x50, 0x1F, 0xA7, 0xFA, 0x27, 0xC1, 0x0D, 0x70, 0xC0, 0x49, 0xBB, 0x7D, 0x10, 0xAC, 0xA3, 0xB3, 0xF5, 0xED, 0x03, 0x82, 0xF7,
-  0x28, 0x91, 0x70, 0xBC, 0xE6, 0xC7, 0x70, 0x1D, 0xE8, 0xC3, 0x3B, 0x82, 0x60, 0x7A, 0x61, 0x1D, 0x5F, 0x00, 0x88, 0x10, 0xEF, 0x73, 0xE2, 0xE1, 0x6C, 0x1D,
-  0x9D, 0x61, 0x6B, 0xDA, 0x96, 0xB3, 0x01, 0xA7, 0xEB, 0xF8, 0x14, 0xEE, 0xB2, 0x0F, 0xBA, 0x03, 0x11, 0x8C, 0xA7, 0xDB, 0x07, 0x9C, 0x27, 0xB8, 0xC4, 0x8F,
-  0xD2, 0xA2, 0xC6, 0x98, 0x10, 0xF2, 0x28, 0xF2, 0x8C, 0x25, 0x69, 0x29, 0x7F, 0x80, 0x7F, 0x5C, 0x3A, 0x04, 0x0F, 0x9F, 0xAD, 0x5F, 0x59, 0xCD, 0x06, 0x5F,
-  0x90, 0x6D, 0x60, 0x0C, 0x93, 0xDB, 0x74, 0x3D, 0xD7, 0x74, 0x6C, 0x13, 0x1D, 0xA5, 0xD9, 0xD2, 0xCE, 0x47, 0x3C, 0x8E, 0xA1, 0x41, 0x03, 0xB8, 0x6C, 0xA4,
-  0xB9, 0xA8, 0xC5, 0x92, 0x62, 0xA3, 0xD5, 0xA5, 0x76, 0xC8, 0x6D, 0x0D, 0x51, 0x70, 0x17, 0xAC, 0x86, 0x03, 0x81, 0x15, 0x38, 0x32, 0xDE, 0x52, 0x88, 0x84,
-  0x42, 0x4B, 0x58, 0x28, 0x1A, 0x39, 0xD4, 0xF6, 0x52, 0x51, 0xB6, 0xC0, 0xAB, 0x85, 0x03, 0xDF, 0x4F, 0x3B, 0x30, 0xA8, 0xCA, 0x0F, 0x9B, 0x8D, 0x4B, 0x7C,
-  0x10, 0xF8, 0xF7, 0xC6, 0x43, 0x04, 0x7A, 0xD8, 0xF8, 0xD7, 0xA9, 0xD6, 0x78, 0x28, 0x7B, 0xF2, 0x6D, 0xDA, 0xE5, 0x98, 0xC6, 0xA6, 0x15, 0x35, 0x36, 0x95,
-  0x34, 0x36, 0xBD, 0x5B, 0x8D, 0xC9, 0x0B, 0xC1, 0xDB, 0x68, 0x4D, 0x5E, 0x79, 0x2D, 0xD0, 0x5C, 0x69, 0x7B, 0xAE, 0x34, 0xAE, 0xAD, 0xA9, 0x4A, 0x5B, 0x9B,
-  0xA8, 0x89, 0xA5, 0x38, 0xF0, 0x1E, 0xE2, 0xBF, 0xFC, 0xE5, 0xCD, 0x6B, 0x0C, 0x95, 0x6A, 0x95, 0x45, 0x1A, 0x4B, 0x97, 0x23, 0x0A, 0x0C, 0x98, 0x3B, 0x13,
-  0x81, 0x3B, 0x91, 0x43, 0x1F, 0x36, 0xB4, 0x26, 0x45, 0x89, 0x19, 0xB4, 0xC4, 0x10, 0x78, 0xE0, 0xAD, 0xE6, 0xBB, 0x18, 0x6C, 0x85, 0xF3, 0xC6, 0xAD, 0x0A,
-  0x6C, 0x01, 0x1B, 0x54, 0x52, 0x22, 0xC3, 0x9C, 0x71, 0x18, 0x29, 0x27, 0xEC, 0xDC, 0x45, 0xA8, 0xBF, 0x06, 0x55, 0x83, 0x9A, 0x88, 0xE9, 0x71, 0x6C, 0x0B,
-  0x4A, 0xA5, 0xC3, 0x23, 0x7F, 0x25, 0x01, 0xF1, 0x39, 0x6C, 0x85, 0x81, 0x8B, 0x4C, 0x50, 0x09, 0x8D, 0x98, 0xBA, 0xCC, 0xC7, 0xB3, 0xAE, 0x83, 0x67, 0xAD,
-  0xC0, 0xC3, 0x33, 0x4F, 0x25, 0x34, 0x7C, 0xA2, 0x2B, 0x17, 0x4B, 0x35, 0x62, 0xF8, 0xE4, 0x92, 0x8A, 0x27, 0x9E, 0xE9, 0xAA, 0xF1, 0xC4, 0x27, 0x45, 0xF2,
-  0xF1, 0x54, 0x94, 0x0D, 0x9F, 0x89, 0x50, 0xD8, 0x73, 0xBA, 0x1A, 0xE9, 0x89, 0xFF, 0x36, 0xAF, 0x3F, 0x26, 0x06, 0x44, 0x8B, 0xF8, 0xCF, 0x5E, 0xBC, 0x64,
-  0xFA, 0x5E, 0x54, 0x8B, 0xC4, 0x51, 0x66, 0x03, 0xE2, 0x74, 0x8D, 0x10, 0xE2, 0x13, 0x8C, 0xE3, 0x49, 0xD0, 0xC5, 0x0A, 0x37, 0x12, 0x63, 0xE6, 0x56, 0xD7,
-  0x05, 0x02, 0x28, 0xC2, 0xD6, 0x69, 0x2F, 0x6D, 0x9E, 0x19, 0x5C, 0xEC, 0x72, 0x1E, 0x3A, 0x76, 0x37, 0x07, 0x23, 0xCF, 0x30, 0xC9, 0x16, 0x78, 0x31, 0x0F,
-  0x1B, 0x1D, 0xC5, 0x48, 0xB8, 0x06, 0x47, 0x47, 0xD9, 0x3C, 0xC3, 0x3B, 0xE0, 0x9F, 0x7E, 0x42, 0x0C, 0x38, 0x1F, 0x15, 0x0F, 0xCD, 0x4C, 0x28, 0x04, 0xB5,
-  0x86, 0x58, 0xB2, 0x6B, 0x9C, 0x66, 0x2A, 0x6E, 0x68, 0xC1, 0x17, 0xE1, 0xB4, 0x27, 0x8C, 0xC6, 0xC4, 0x07, 0x0D, 0xC6, 0x30, 0xF8, 0x8E, 0xBE, 0x5B, 0xC4,
-  0x90, 0xD1, 0x07, 0xAB, 0x23, 0x4C, 0xEC, 0x1A, 0x0E, 0x5C, 0x53, 0x97, 0xD8, 0xDA, 0x4E, 0xC7, 0x73, 0x89, 0xBA, 0xD7, 0x44, 0xFD, 0xCE, 0x3B, 0xE2, 0x67,
-  0xFC, 0x89, 0xEF, 0xB8, 0x99, 0x4F, 0xC2, 0xA5, 0xEF, 0xF2, 0x7A, 0x3E, 0x5B, 0xDF, 0x28, 0x87, 0x92, 0x3B, 0xB4, 0xCD, 0x83, 0x03, 0xED, 0x69, 0x18, 0x1A,
-  0xA0, 0x00, 0x5C, 0xA7, 0x9C, 0xA1, 0x7C, 0x34, 0x83, 0x4F, 0x4A, 0x78, 0x3E, 0x1A, 0x25, 0x7B, 0xA8, 0x98, 0x30, 0xBF, 0xC5, 0xCF, 0x3C, 0x09, 0x77, 0xA6,
-  0xA8, 0xBA, 0xFF, 0x5E, 0x12, 0x7F, 0x7D, 0x45, 0x05, 0xE6, 0xF9, 0x4F, 0x1D, 0xA7, 0xD9, 0xE8, 0xC6, 0xCB, 0xCE, 0x0D, 0x36, 0x06, 0xEF, 0x02, 0xAA, 0x4B,
-  0xE8, 0x03, 0x74, 0x1C, 0xDB, 0x3C, 0xE3, 0x26, 0xD2, 0x3B, 0x8C, 0xBB, 0xCE, 0xB9, 0x32, 0xD2, 0x83, 0x7E, 0x80, 0xF0, 0xDC, 0xCF, 0x64, 0xBD, 0x5C, 0x80,
-  0xF8, 0xE3, 0x61, 0x7C, 0x6A, 0x62, 0x81, 0x4B, 0x87, 0x74, 0x01, 0xF2, 0x82, 0x0F, 0xE4, 0xFA, 0x87, 0x0A, 0xA0, 0x58, 0x05, 0xD4, 0x3A, 0xD1, 0x13, 0xB3,
-  0x5F, 0xC1, 0xB8, 0xBD, 0xA7, 0x3E, 0x53, 0x4C, 0x81, 0x70, 0x02, 0xB9, 0xF0, 0x44, 0xF2, 0x4A, 0xF5, 0x90, 0x9A, 0x9E, 0xB8, 0x6D, 0xDD, 0x8B, 0x23, 0xC3,
-  0x72, 0x61, 0x19, 0x21, 0x49, 0x06, 0x87, 0xC8, 0x16, 0xC4, 0xCD, 0xB9, 0x17, 0x92, 0x54, 0xC4, 0xB0, 0x5D, 0x3B, 0xB4, 0x0D, 0xE7, 0x7D, 0x6C, 0x8D, 0x5F,
-  0xD4, 0xFD, 0x15, 0x3E, 0x5E, 0xC3, 0xFF, 0x33, 0x73, 0x10, 0xD5, 0xC6, 0xCD, 0x19, 0x0B, 0x89, 0xE2, 0x41, 0x6C, 0x25, 0xB2, 0x1C, 0x12, 0x61, 0x81, 0xDF,
-  0x17, 0x3D, 0xDD, 0xBF, 0x4F, 0x8F, 0xEE, 0x45, 0x4A, 0x13, 0xD1, 0xE3, 0x5C, 0x8B, 0x6F, 0xA4, 0x14, 0x9C, 0xC5, 0x9D, 0xC2, 0x21, 0x90, 0x4B, 0x18, 0x98,
-  0x6F, 0x45, 0xEA, 0x5D, 0x40, 0xB5, 0x89, 0xB6, 0xF0, 0xFF, 0x51, 0xFF, 0x2B, 0x8A, 0xFA, 0x5F, 0x2E, 0xC4, 0x17, 0xD8, 0x76, 0xCA, 0x03, 0x58, 0x3B, 0xF5,
-  0xB4, 0xE0, 0xC3, 0x06, 0x54, 0x3B, 0xCA, 0x79, 0x3F, 0x1E, 0xBA, 0x63, 0xFB, 0x9A, 0xD9, 0x16, 0x23, 0x3A, 0xB6, 0x2C, 0x94, 0x11, 0x4E, 0xDF, 0xE3, 0x04,
-  0x37, 0xCE, 0x76, 0x37, 0x1B, 0x6C, 0x6D, 0x81, 0xC6, 0xE3, 0xDB, 0xB8, 0x24, 0x99, 0x79, 0xAB, 0xA2, 0x96, 0x3E, 0x44, 0x9D, 0x6B, 0x92, 0x6A, 0x1C, 0xB5,
-  0xE6, 0xDF, 0x6A, 0x2F, 0xED, 0x5A, 0x7C, 0xD3, 0x9D, 0x27, 0x03, 0x00, 0x88, 0xBE, 0xF2, 0x7E, 0xAE, 0x85, 0x3E, 0xF5, 0x1A, 0x09, 0x2D, 0x71, 0xCB, 0xB0,
-  0x0A, 0xB2, 0x0A, 0x11, 0xD3, 0x32, 0x2F, 0x89, 0x99, 0x85, 0xD2, 0x1A, 0x41, 0x56, 0xBE, 0x0C, 0x2D, 0x92, 0xA7, 0xE7, 0x9A, 0xBB, 0x74, 0x1C, 0xB0, 0x41,
-  0x64, 0x01, 0x6C, 0x50, 0xBE, 0xAB, 0x0C, 0xD1, 0xFF, 0xB9, 0xF1, 0x2C, 0xA2, 0x3C, 0x21, 0x81, 0x07, 0x0F, 0x92, 0xD8, 0x70, 0x91, 0x81, 0x95, 0xF1, 0x51,
-  0x6F, 0x0C, 0xFE, 0xC2, 0x73, 0x27, 0xF6, 0x34, 0xCE, 0xB3, 0x9C, 0x24, 0x48, 0xD6, 0xF7, 0x13, 0x82, 0x97, 0x6A, 0x1C, 0x20, 0xC4, 0xB6, 0xA8, 0x80, 0xE8,
-  0x9B, 0xFA, 0x32, 0xB3, 0xB1, 0x4F, 0xA8, 0xD5, 0x37, 0x09, 0x7F, 0x87, 0x57, 0x0B, 0xE4, 0x8F, 0xC6, 0x1C, 0x5F, 0x10, 0xF5, 0x4E, 0xD4, 0x95, 0x8C, 0x71,
-  0x9A, 0xC0, 0x88, 0x8C, 0xA5, 0xE8, 0xC6, 0x1F, 0xC5, 0x87, 0x6F, 0xB3, 0xE1, 0x6F, 0xD4, 0x91, 0xBF, 0x60, 0x48, 0x3B, 0x07, 0x34, 0xF8, 0xC6, 0x1D, 0x29,
-  0xB5, 0x67, 0x6B, 0x03, 0x0A, 0x98, 0x83, 0x84, 0x76, 0x90, 0x45, 0x52, 0x48, 0xB9, 0x78, 0x9D, 0xA9, 0x42, 0x20, 0x14, 0xDD, 0x6A, 0x8C, 0xA2, 0xA0, 0xBD,
-  0xC2, 0x61, 0x2E, 0x2A, 0x2D, 0xB5, 0x97, 0x31, 0x83, 0x6E, 0xA4, 0x75, 0xFA, 0x02, 0x27, 0x80, 0xBE, 0xC0, 0xB5, 0xFB, 0x08, 0x73, 0x74, 0x21, 0x59, 0x54,
-  0x0A, 0x67, 0x8B, 0x26, 0x95, 0x65, 0xED, 0xB3, 0xD4, 0x17, 0xE7, 0xBD, 0xD8, 0xBC, 0xEE, 0x28, 0x13, 0xF4, 0x35, 0xF9, 0x93, 0x65, 0x72, 0xBC, 0xDE, 0x32,
-  0x09, 0x14, 0xE0, 0x64, 0x8B, 0xAD, 0x69, 0xA4, 0xCB, 0xF1, 0xDC, 0x0E, 0x15, 0x08, 0x1B, 0xFD, 0x46, 0x9D, 0x7C, 0x22, 0xFB, 0x1E, 0x8B, 0x5F, 0xB4, 0xD4,
-  0x06, 0x44, 0x89, 0x49, 0x72, 0xFA, 0xDA, 0x7C, 0xCF, 0x79, 0x72, 0x6D, 0xF8, 0x38, 0xF5, 0x8D, 0x0A, 0x4E, 0x2D, 0xC9, 0x30, 0x14, 0x6C, 0x2D, 0x91, 0xA2,
-  0x48, 0xAE, 0x26, 0x8A, 0x15, 0xBC, 0x64, 0x65, 0x2E, 0x2F, 0x61, 0x7D, 0xF2, 0x09, 0xB4, 0x0B, 0x70, 0xAA, 0x41, 0xFB, 0xFE, 0x2F, 0x8A, 0xE2, 0x56, 0x9B,
-  0x80, 0xEF, 0x07, 0x33, 0x62, 0xD1, 0x85, 0x82, 0x10, 0xBF, 0xF2, 0x87, 0xCB, 0x30, 0x89, 0xD5, 0xC3, 0xDB, 0x4F, 0x91, 0x85, 0x44, 0xA9, 0xA3, 0x74, 0xF0,
-  0x40, 0x17, 0x99, 0x8B, 0xC7, 0x0D, 0xAC, 0xDC, 0x56, 0x4C, 0x15, 0xE1, 0x8F, 0xC5, 0x05, 0xA7, 0xCB, 0x3E, 0x4D, 0xFE, 0x13, 0x54, 0x23, 0x29, 0x33, 0x6D,
-  0xF1, 0x61, 0x0F, 0x68, 0xC0, 0x12, 0x01, 0x8C, 0xE9, 0x08, 0x07, 0x37, 0x4C, 0x4C, 0x09, 0x09, 0x33, 0x66, 0x38, 0x2F, 0xE5, 0x2B, 0xB0, 0x3C, 0xAB, 0x47,
-  0xB2, 0xF8, 0x23, 0x80, 0xC1, 0x4A, 0xEB, 0x5E, 0x24, 0x86, 0x2C, 0x0E, 0xEC, 0x40, 0x42, 0x90, 0x10, 0x51, 0x9E, 0x98, 0x92, 0x3B, 0x8B, 0x1B, 0x71, 0xFC,
-  0xC8, 0x1D, 0x6B, 0x69, 0x72, 0xFE, 0xA3, 0xC9, 0x8F, 0xF6, 0xFB, 0x3B, 0x35, 0x99, 0x7F, 0xF1, 0x79, 0x11, 0x29, 0x0E, 0xB5, 0xEA, 0x90, 0x93, 0x19, 0xF2,
-  0x95, 0x90, 0x72, 0x87, 0xC5, 0xAF, 0xF8, 0x41, 0x78, 0xA3, 0xF8, 0xA0, 0xC4, 0xCC, 0x0C, 0xFA, 0xE4, 0x0A, 0x2D, 0x62, 0x30, 0x71, 0x96, 0x1C, 0x83, 0x49,
-  0xE2, 0x51, 0x56, 0x67, 0xB9, 0xE2, 0x62, 0xD6, 0xC5, 0xDC, 0xF5, 0xDA, 0x26, 0xAB, 0xC2, 0xE9, 0x50, 0xFA, 0x74, 0x00, 0x95, 0x57, 0xDC, 0xE0, 0x22, 0x7A,
-  0x1A, 0xA4, 0xB4, 0x65, 0xFC, 0xE4, 0x88, 0x84, 0x83, 0x3E, 0x16, 0x52, 0x6D, 0xB5, 0x82, 0x82, 0x26, 0x9A, 0x22, 0xD6, 0xF2, 0xB6, 0x89, 0xCD, 0xDC, 0x52,
-  0x7B, 0xEA, 0xB9, 0xE5, 0xCD, 0xE5, 0xA7, 0x48, 0xE4, 0xDE, 0x8D, 0xEB, 0x0A, 0x8D, 0xE3, 0x47, 0x5F, 0xA4, 0xA6, 0x22, 0x1F, 0x15, 0x35, 0x8C, 0xDE, 0x3E,
-  0xD0, 0x90, 0x34, 0x14, 0x84, 0xDE, 0x82, 0xED, 0x42, 0x4F, 0x05, 0x92, 0x15, 0x9D, 0x7D, 0xEC, 0xE2, 0xFD, 0x26, 0x2F, 0x5A, 0x64, 0xE9, 0x24, 0x97, 0x18,
-  0xE4, 0xDD, 0xEC, 0x8D, 0x64, 0xC5, 0x49, 0xA7, 0x2F, 0x95, 0x3D, 0xA0, 0xAE, 0xBB, 0x81, 0x6F, 0xB2, 0x70, 0x1E, 0x3D, 0x28, 0x82, 0xD1, 0x06, 0x0F, 0x3F,
-  0xB1, 0x3E, 0x31, 0xFD, 0x26, 0xAC, 0xA2, 0x55, 0x4A, 0x8B, 0xB7, 0x48, 0x93, 0x12, 0x4F, 0xF1, 0x30, 0x0F, 0x0D, 0x30, 0x8E, 0xF3, 0x37, 0x01, 0xDC, 0xD3,
-  0x64, 0x8B, 0xC9, 0x09, 0xAB, 0xB1, 0x98, 0x78, 0x1C, 0x4B, 0x12, 0x2F, 0xE5, 0x22, 0xF6, 0x94, 0xD1, 0x93, 0x8F, 0xE6, 0x18, 0xD2, 0xCF, 0x73, 0x70, 0x1F,
-  0xF0, 0xD7, 0x55, 0xB3, 0x75, 0x5B, 0xC4, 0x0E, 0x13, 0x57, 0x6C, 0x3B, 0x55, 0x89, 0xA0, 0x81, 0x5E, 0x8D, 0x2D, 0x21, 0x1F, 0x35, 0x3A, 0xD9, 0xE4, 0x2F,
-  0x5D, 0x31, 0x68, 0xC8, 0x13, 0xEC, 0x79, 0x56, 0xB4, 0xAC, 0x6E, 0x4C, 0x20, 0x88, 0x43, 0x78, 0x86, 0xD8, 0x54, 0x69, 0x28, 0xD9, 0x85, 0x00, 0x88, 0x68,
-  0x8F, 0xFC, 0x20, 0x87, 0x72, 0x7C, 0xB0, 0xC8, 0x34, 0xDC, 0x6B, 0x23, 0x90, 0xED, 0xDD, 0x04, 0x5C, 0x21, 0xE1, 0x26, 0xDF, 0xD4, 0x19, 0x80, 0xCE, 0x6D,
-  0x97, 0x9D, 0x75, 0xE9, 0x4E, 0x0C, 0x2C, 0xED, 0x51, 0x7D, 0xF4, 0x24, 0x71, 0x9B, 0x7D, 0xF8, 0x55, 0xDC, 0x67, 0x67, 0x0C, 0x20, 0xEA, 0x05, 0x3F, 0xB5,
-  0xDA, 0x35, 0x16, 0x0B, 0xE2, 0x5A, 0x17, 0x33, 0xDB, 0xB1, 0x9A, 0xAC, 0x69, 0xF4, 0xEC, 0x89, 0xCF, 0xBE, 0xD2, 0x4E, 0x9F, 0x73, 0xE0, 0x58, 0xC1, 0x11,
-  0x2F, 0xD8, 0xB5, 0x66, 0x63, 0x60, 0x89, 0xC7, 0x54, 0x38, 0x58, 0xD7, 0xF2, 0x8D, 0xD5, 0x2B, 0x7C, 0x0C, 0x8E, 0x6A, 0xB2, 0xDD, 0x6B, 0xF7, 0x38, 0x40,
-  0x08, 0x95, 0x8E, 0x90, 0x16, 0xE2, 0xC5, 0xC7, 0x85, 0x7E, 0x7D, 0xF7, 0x3A, 0xC6, 0x1B, 0x7A, 0xCF, 0xD9, 0xA5, 0x66, 0x83, 0x3E, 0x47, 0x77, 0xF0, 0xC7,
-  0x02, 0x57, 0x5F, 0x45, 0x8C, 0x97, 0xC4, 0x88, 0x8F, 0xC8, 0xA1, 0xA8, 0x18, 0xF8, 0x0F, 0x32, 0x52, 0xB8, 0xEC, 0x42, 0x90, 0x46, 0x4B, 0x6D, 0xAA, 0x9A,
-  0x8A, 0x07, 0xE8, 0xB0, 0x39, 0x72, 0xF2, 0x23, 0x8C, 0xF8, 0xFE, 0x49, 0x0C, 0x1F, 0xF4, 0xF1, 0x50, 0x6B, 0xEA, 0x3D, 0xFD, 0x61, 0x93, 0x5E, 0x7F, 0x03,
-  0xEC, 0xCC, 0x9A, 0xAD, 0x87, 0xFD, 0x56, 0x0B, 0x3F, 0xAC, 0x6E, 0x92, 0x66, 0x67, 0x20, 0x40, 0xE0, 0x0F, 0x85, 0x61, 0x9D, 0xE4, 0xDF, 0x7F, 0xE9, 0x2D,
-  0xFD, 0xA0, 0x08, 0xE0, 0x8D, 0xED, 0x62, 0x1A, 0x2C, 0x02, 0xB9, 0x22, 0x20, 0x58, 0x2B, 0x03, 0xA2, 0xD3, 0xE7, 0xFE, 0xC4, 0xE0, 0x8B, 0x3E, 0x0E, 0x05,
-  0xF5, 0xB6, 0x54, 0x69, 0xF3, 0x62, 0x8F, 0xE0, 0xE4, 0x71, 0x53, 0x2C, 0xE7, 0xDC, 0xCA, 0xC6, 0x11, 0x97, 0x53, 0x7C, 0xF8, 0x9D, 0xD1, 0x7F, 0x2A, 0xD6,
-  0xF0, 0x02, 0x25, 0x33, 0xAD, 0x5C, 0xA5, 0x06, 0x54, 0x16, 0x37, 0x85, 0xC5, 0x60, 0x72, 0xEE, 0x35, 0x3D, 0xEC, 0x4C, 0x16, 0x7E, 0x17, 0x4B, 0x70, 0xCF,
-  0xB9, 0x08, 0x86, 0xEC, 0x1A, 0x8E, 0xC1, 0xA2, 0xA8, 0x0D, 0x63, 0xB2, 0xA2, 0x54, 0x02, 0xB7, 0xA5, 0xE4, 0xC3, 0x07, 0x70, 0x25, 0x0D, 0xA4, 0xD7, 0xED,
-  0x4A, 0x6D, 0xA5, 0x81, 0x61, 0x61, 0xB2, 0x4E, 0xBF, 0x20, 0x96, 0xA2, 0x00, 0xAC, 0x59, 0xCE, 0xE5, 0x79, 0x0B, 0xCE, 0x3F, 0xC0, 0xB5, 0xA2, 0x78, 0x85,
-  0x8D, 0xF8, 0x98, 0x49, 0x8A, 0x56, 0x39, 0x23, 0xDD, 0xEC, 0x28, 0x37, 0x15, 0xC6, 0xF2, 0x46, 0xB7, 0xD9, 0x91, 0xED, 0xAD, 0x64, 0x20, 0xE2, 0xC5, 0xDB,
-  0xB1, 0x08, 0x49, 0xB1, 0xBC, 0x89, 0x2C, 0x6F, 0x31, 0xC2, 0x2F, 0x69, 0x21, 0xBF, 0x1F, 0x9C, 0x89, 0x8B, 0x54, 0x14, 0x17, 0xE1, 0xE2, 0xC2, 0x06, 0xF1,
-  0xF0, 0xB2, 0x7C, 0xBA, 0x21, 0xB2, 0xFF, 0xDF, 0x9E, 0xC5, 0x9C, 0xAD, 0xC6, 0x85, 0x74, 0xF2, 0xE1, 0xBC, 0xC4, 0x5E, 0x71, 0x83, 0xC4, 0x47, 0x44, 0x18,
-  0x5B, 0xAB, 0x71, 0x35, 0xB6, 0xC4, 0x74, 0x00, 0x36, 0x88, 0xD9, 0x52, 0x4F, 0x1A, 0x08, 0x56, 0x9E, 0x93, 0x90, 0xEF, 0x60, 0x33, 0x5C, 0x4B, 0x8B, 0x3E,
-  0x7B, 0x1B, 0x11, 0x1B, 0x5D, 0x29, 0xA2, 0x39, 0x02, 0x62, 0x95, 0x57, 0x74, 0x5A, 0x89, 0xEC, 0x08, 0x3A, 0x36, 0xE1, 0x18, 0x81, 0x98, 0xAA, 0x38, 0x4A,
-  0x4F, 0x38, 0xB1, 0x1A, 0xDE, 0xA2, 0xD4, 0xA7, 0x2A, 0x75, 0x19, 0xC0, 0x87, 0x68, 0x39, 0x75, 0x01, 0x53, 0x02, 0x86, 0x99, 0x2A, 0x8B, 0x16, 0xEC, 0x77,
-  0x76, 0x20, 0x9E, 0x20, 0x66, 0x67, 0xEC, 0x83, 0xE3, 0x67, 0x07, 0xB3, 0x70, 0xEE, 0x8C, 0xEE, 0xFD, 0x2F, 0xFC, 0x34, 0x4E, 0xF9, 0x5F, 0xA4, 0x00, 0x00
+  0x1F, 0x8B, 0x08, 0x08, 0xA5, 0xF6, 0xDA, 0x67, 0x00, 0xFF, 0x69, 0x6E, 0x64, 0x65, 0x78, 0x5F, 0x6F, 0x76, 0x32, 0x36, 0x34, 0x30, 0x2E, 0x68, 0x74, 0x6D,
+  0x6C, 0x2E, 0x67, 0x7A, 0x00, 0xED, 0x7D, 0x7B, 0x73, 0xDB, 0x36, 0xD6, 0xF7, 0xFF, 0xFD, 0x14, 0x8C, 0xDA, 0xB5, 0xE4, 0xB1, 0x24, 0xDB, 0xB2, 0xE3, 0x24,
+  0x5E, 0x5B, 0x79, 0x72, 0x71, 0x93, 0xCE, 0x93, 0xB4, 0xDD, 0xBA, 0x97, 0xEC, 0xEC, 0xEC, 0xA4, 0x94, 0x08, 0x49, 0x6C, 0x28, 0x52, 0x4B, 0x52, 0xBE, 0xB4,
+  0xE3, 0xCF, 0xF1, 0x7E, 0xA0, 0xE7, 0x8B, 0xED, 0xEF, 0x00, 0x20, 0x09, 0x92, 0xE0, 0x4D, 0xB2, 0xA5, 0x6C, 0xF7, 0x95, 0x34, 0x12, 0x05, 0x02, 0x07, 0x07,
+  0xE7, 0x86, 0x83, 0x83, 0x0B, 0xCF, 0x1E, 0x59, 0xDE, 0x38, 0xBC, 0x5D, 0x30, 0x63, 0x16, 0xCE, 0x9D, 0xE1, 0x17, 0x67, 0xE2, 0xC7, 0xC0, 0xEB, 0x6C, 0xC6,
+  0x4C, 0x4B, 0x5C, 0xF2, 0xBF, 0x73, 0x16, 0x9A, 0xC6, 0x78, 0x66, 0xFA, 0x01, 0x0B, 0xCF, 0x5B, 0xCB, 0x70, 0xD2, 0x7B, 0xDA, 0xCA, 0xDE, 0x76, 0xCD, 0x39,
+  0x3B, 0x6F, 0x5D, 0xD9, 0xEC, 0x7A, 0xE1, 0xF9, 0x61, 0xCB, 0x18, 0x7B, 0x6E, 0xC8, 0x5C, 0x64, 0xBF, 0xB6, 0xAD, 0x70, 0x76, 0x6E, 0xB1, 0x2B, 0x7B, 0xCC,
+  0x7A, 0xFC, 0x4F, 0xD7, 0x76, 0xED, 0xD0, 0x36, 0x9D, 0x5E, 0x30, 0x36, 0x1D, 0x76, 0x7E, 0xA8, 0xC2, 0x0A, 0xED, 0xD0, 0x61, 0xC3, 0x8B, 0xCB, 0xEF, 0x8F,
+  0x06, 0xC6, 0x77, 0x3F, 0x0F, 0x4E, 0x8E, 0x0F, 0xCE, 0xF6, 0x45, 0x5A, 0x92, 0x27, 0x08, 0x6F, 0xD5, 0xFF, 0xF4, 0x1A, 0x79, 0xD6, 0xAD, 0xF1, 0x47, 0x2A,
+  0x89, 0x5E, 0x13, 0x20, 0xD1, 0x9B, 0x98, 0x73, 0xDB, 0xB9, 0x3D, 0x35, 0x5E, 0xF8, 0xA8, 0xB3, 0xFB, 0x96, 0x39, 0x57, 0x2C, 0xB4, 0xC7, 0x66, 0x37, 0x30,
+  0xDD, 0xA0, 0x17, 0x30, 0xDF, 0x9E, 0xFC, 0x35, 0x57, 0x70, 0x64, 0x8E, 0x3F, 0x4D, 0x7D, 0x6F, 0xE9, 0x5A, 0xA7, 0xC6, 0x97, 0x87, 0x4F, 0xE9, 0x9D, 0xCF,
+  0x34, 0xF6, 0x1C, 0xCF, 0xC7, 0xFD, 0x8B, 0xAF, 0xE9, 0x9D, 0xBF, 0xCF, 0x6B, 0x0F, 0xEC, 0xDF, 0xD9, 0xA9, 0x71, 0x78, 0xB2, 0xB8, 0x49, 0xDD, 0xBF, 0xFB,
+  0x22, 0xF5, 0x77, 0x36, 0x28, 0xC2, 0x5E, 0x96, 0x7F, 0x5A, 0x5E, 0x3E, 0x60, 0xE3, 0xD0, 0xF6, 0xDC, 0xFE, 0xDC, 0xB4, 0x5D, 0x0D, 0x24, 0xCB, 0x0E, 0x16,
+  0x8E, 0x09, 0x1A, 0x4C, 0x1C, 0x56, 0x0A, 0xE7, 0xCB, 0x39, 0x73, 0x97, 0xDD, 0x0A, 0x68, 0x04, 0xA4, 0x67, 0xD9, 0xBE, 0xC8, 0x75, 0x4A, 0x74, 0x58, 0xCE,
+  0xDD, 0x4A, 0xB0, 0x65, 0x78, 0xB9, 0x9E, 0xCB, 0x34, 0x04, 0xA4, 0x8A, 0xAE, 0x7D, 0x73, 0x41, 0x19, 0xE8, 0x37, 0x9F, 0x65, 0x6E, 0xBB, 0x42, 0xA8, 0x4E,
+  0x8D, 0xA3, 0xE3, 0x83, 0xC5, 0x4D, 0x05, 0x2B, 0x8F, 0x4E, 0xE8, 0x9D, 0xCF, 0xB4, 0x30, 0x2D, 0xCB, 0x76, 0xA7, 0xA7, 0x06, 0xE8, 0xAC, 0x01, 0xE1, 0xF9,
+  0x16, 0xF3, 0x7B, 0xBE, 0x69, 0xD9, 0xCB, 0xE0, 0xD4, 0x38, 0xD6, 0xE5, 0x99, 0x9B, 0xFE, 0x14, 0xB8, 0x84, 0x1E, 0x90, 0xED, 0x1D, 0x6A, 0x31, 0x91, 0x59,
+  0x7C, 0x7B, 0x3A, 0x0B, 0xC1, 0xD2, 0x5C, 0x9E, 0x2C, 0xD1, 0xA4, 0x0A, 0x55, 0xF1, 0xB3, 0x94, 0x6E, 0x7A, 0xAA, 0x99, 0x8E, 0x3D, 0x75, 0x7B, 0x76, 0xC8,
+  0xE6, 0x68, 0x4E, 0x10, 0xFA, 0x2C, 0x1C, 0xCF, 0xCA, 0x50, 0x99, 0xD8, 0xD3, 0xA5, 0xCF, 0x34, 0x88, 0xC4, 0x74, 0x2B, 0x69, 0x30, 0x6E, 0xE6, 0x6F, 0xF5,
+  0xAE, 0xD9, 0xE8, 0x93, 0x1D, 0xF6, 0x24, 0x4D, 0x46, 0x6C, 0xE2, 0xF9, 0x90, 0x73, 0x4D, 0xCE, 0x28, 0x87, 0xE3, 0x8D, 0x3F, 0xF5, 0x82, 0xD0, 0xF4, 0x41,
+  0xBB, 0x6A, 0x80, 0xE6, 0x24, 0x64, 0xD0, 0xCD, 0x2A, 0x78, 0x8C, 0xA4, 0xA2, 0x1A, 0x5A, 0x71, 0xB5, 0x32, 0x83, 0xED, 0x3A, 0xB6, 0xCB, 0xEA, 0xA3, 0x57,
+  0x54, 0x6F, 0x1A, 0x9C, 0xC8, 0x55, 0x83, 0x31, 0xF6, 0x7C, 0x5A, 0x26, 0x25, 0xBC, 0xAD, 0xF9, 0xCA, 0xA4, 0xDE, 0x1C, 0x1E, 0x1C, 0xFC, 0x25, 0x7F, 0x73,
+  0xC6, 0x84, 0x98, 0x9A, 0xCB, 0xD0, 0x5B, 0x5F, 0x23, 0x72, 0x6A, 0x95, 0x69, 0xC7, 0xFF, 0xCC, 0x99, 0x65, 0x9B, 0x46, 0x47, 0x51, 0xE7, 0xA7, 0x07, 0x90,
+  0xA9, 0x5D, 0xC3, 0x74, 0x2D, 0xA3, 0xE3, 0xF9, 0x36, 0x14, 0xC1, 0xE4, 0xE6, 0xC6, 0x41, 0x0A, 0x3A, 0x8E, 0x05, 0xDB, 0xD5, 0x34, 0xB9, 0x44, 0x67, 0x54,
+  0x8A, 0xE8, 0xD5, 0xA6, 0xA6, 0xC9, 0xA9, 0xA5, 0x40, 0x9A, 0x36, 0x56, 0xF2, 0xAB, 0x0E, 0xCF, 0x04, 0x61, 0x81, 0x62, 0x19, 0xEF, 0xA2, 0x4C, 0x11, 0x0F,
+  0xD1, 0xCD, 0x8E, 0x3B, 0xC8, 0x7A, 0x35, 0x33, 0x7A, 0x06, 0x59, 0xC9, 0x5D, 0x7D, 0x19, 0x09, 0x54, 0xCF, 0xF2, 0xAC, 0x50, 0x34, 0x68, 0xAE, 0xBE, 0xA9,
+  0x89, 0xED, 0x10, 0x6F, 0x9D, 0x0C, 0x55, 0x58, 0x91, 0x66, 0x96, 0xA4, 0x81, 0x35, 0x69, 0x64, 0x51, 0x6A, 0x5B, 0x95, 0x46, 0x96, 0xA5, 0x89, 0x75, 0x69,
+  0x60, 0x61, 0x6A, 0x59, 0x19, 0xC1, 0xCE, 0x6A, 0x7F, 0xE3, 0xCB, 0xD1, 0x32, 0x0C, 0x3D, 0x37, 0x58, 0xAB, 0x8B, 0x2A, 0xD2, 0xB3, 0xDF, 0x96, 0x41, 0x68,
+  0x4F, 0x6E, 0x7B, 0x52, 0xA5, 0xA1, 0x67, 0x0B, 0x13, 0x2E, 0xE4, 0x88, 0x85, 0xD7, 0x8C, 0x95, 0xBB, 0x1B, 0xAE, 0x79, 0x05, 0xBB, 0x33, 0x9D, 0x3A, 0x3A,
+  0xD9, 0x1B, 0x2F, 0xFD, 0x80, 0xFC, 0xB6, 0x85, 0x67, 0x03, 0xB0, 0x9F, 0xAF, 0x38, 0xAD, 0x83, 0x35, 0x2B, 0xEA, 0x8D, 0x47, 0x9A, 0xBA, 0xBC, 0x65, 0x48,
+  0x34, 0xD6, 0x72, 0xC2, 0x43, 0x73, 0xEC, 0x10, 0xD5, 0x68, 0xEE, 0x49, 0x4D, 0xD4, 0xDC, 0x89, 0x54, 0xB0, 0xB4, 0x5B, 0x48, 0xE3, 0x75, 0x3A, 0x9E, 0xB1,
+  0xF1, 0x27, 0x66, 0xED, 0x55, 0xBA, 0x61, 0x55, 0xEE, 0x61, 0xDF, 0x76, 0x17, 0xCB, 0xB0, 0x47, 0xEE, 0xD4, 0xE2, 0x41, 0x78, 0xCE, 0x05, 0x32, 0x6A, 0xE2,
+  0x60, 0x50, 0xE6, 0x54, 0x3C, 0x5E, 0xDC, 0x94, 0x13, 0x41, 0x45, 0x76, 0xE8, 0x98, 0x23, 0xE6, 0x94, 0xA1, 0x2C, 0x95, 0xA1, 0xC0, 0xEC, 0x4A, 0x5B, 0x55,
+  0xEC, 0xBB, 0x65, 0x7C, 0xD1, 0xE3, 0x27, 0x7F, 0xA9, 0x4D, 0x47, 0x7E, 0xDD, 0x4D, 0x25, 0x05, 0xCC, 0x81, 0x82, 0x15, 0xB9, 0xDE, 0xC8, 0x73, 0x0D, 0x1C,
+  0x4A, 0x2B, 0xF0, 0x4D, 0x77, 0xCA, 0x60, 0x0B, 0x6E, 0xBA, 0xD1, 0x65, 0xF9, 0xC0, 0xA0, 0x56, 0xF3, 0xC9, 0x54, 0x83, 0xEC, 0x65, 0x15, 0x0B, 0x83, 0xD0,
+  0x35, 0xFA, 0xE2, 0x62, 0x05, 0xAF, 0x44, 0xE1, 0x6F, 0x29, 0x22, 0x87, 0x5A, 0xE9, 0x10, 0x8E, 0x89, 0x56, 0x73, 0xD2, 0xB2, 0xA5, 0x75, 0xF4, 0x2B, 0x4D,
+  0x43, 0x34, 0xE4, 0x9B, 0x4C, 0xAA, 0x06, 0x8D, 0x93, 0xC9, 0xD1, 0xC1, 0xD1, 0x71, 0xA5, 0xE7, 0xA4, 0x6D, 0x65, 0x66, 0xE0, 0xA8, 0x31, 0x1D, 0xB1, 0x59,
+  0x29, 0x15, 0x82, 0xC0, 0xBC, 0xD2, 0x3A, 0xED, 0x5E, 0x80, 0xF1, 0x37, 0x8D, 0xDC, 0xCC, 0x51, 0x80, 0xB1, 0x5B, 0xA8, 0x19, 0x7A, 0x49, 0x41, 0x1F, 0x68,
+  0xF1, 0xE3, 0x2E, 0x9D, 0x56, 0x05, 0x22, 0xF2, 0xEA, 0xD1, 0x4E, 0x71, 0x40, 0x9F, 0x45, 0x61, 0xB0, 0xD6, 0xA9, 0x0C, 0xD9, 0x4D, 0xD8, 0xB3, 0xD8, 0xD8,
+  0xF3, 0x85, 0x37, 0x58, 0x30, 0x72, 0xCC, 0x30, 0xB2, 0x5A, 0x62, 0x4F, 0x67, 0xDE, 0x15, 0xF3, 0x35, 0xC4, 0xCA, 0x30, 0xF5, 0xF8, 0xD9, 0xB1, 0x55, 0x03,
+  0x9A, 0x89, 0xEE, 0x51, 0x4B, 0xFB, 0x34, 0xB8, 0xC1, 0xE1, 0x78, 0x50, 0xAA, 0xC7, 0x02, 0x5C, 0x1F, 0x3A, 0x63, 0x8E, 0x1C, 0x66, 0x95, 0xF4, 0x66, 0x16,
+  0x9B, 0x98, 0x4B, 0x27, 0xAC, 0x90, 0x4A, 0xF3, 0x80, 0xDE, 0x65, 0x35, 0x72, 0x33, 0xF4, 0x0F, 0x8A, 0x0B, 0x9D, 0x73, 0xC3, 0xF1, 0x4F, 0x4D, 0x9D, 0x91,
+  0xAB, 0x61, 0x2E, 0x16, 0xCC, 0x44, 0xAE, 0x31, 0x24, 0x51, 0xCF, 0x87, 0x5A, 0x43, 0x0C, 0xBD, 0x9D, 0xAF, 0x35, 0x6E, 0xAF, 0x54, 0xD8, 0xD8, 0x79, 0x6C,
+  0xD4, 0xE6, 0xD3, 0x89, 0x37, 0x5E, 0xEA, 0xBC, 0x9A, 0x7A, 0x8A, 0x97, 0x87, 0x77, 0x1A, 0x91, 0x2C, 0x70, 0x6C, 0xAE, 0xFE, 0x4B, 0xD7, 0x25, 0x8E, 0xF6,
+  0x42, 0x1F, 0xCD, 0xD4, 0x54, 0x54, 0x8F, 0x70, 0x2B, 0xD9, 0xB0, 0x14, 0x61, 0x8B, 0x62, 0x57, 0x19, 0x33, 0xA5, 0x31, 0xA7, 0xB1, 0xA5, 0x35, 0x60, 0x43,
+  0x6C, 0x2B, 0x02, 0xB5, 0x1E, 0x5D, 0xC2, 0xD9, 0x72, 0xAE, 0xF3, 0xA3, 0xA2, 0xCA, 0x0E, 0xD1, 0xE9, 0x8B, 0xEA, 0xFC, 0xE9, 0xC8, 0xEC, 0x1C, 0x74, 0x0F,
+  0xBA, 0x47, 0xF8, 0xD2, 0x8C, 0x67, 0xCA, 0x85, 0x4B, 0x92, 0xB7, 0x40, 0xF2, 0x32, 0x26, 0xBA, 0x3A, 0xAC, 0x54, 0x64, 0xEC, 0x2B, 0x79, 0x51, 0x5F, 0x93,
+  0xD2, 0xF1, 0xA5, 0xC3, 0x7E, 0x45, 0x3F, 0x5C, 0x20, 0xD2, 0xCD, 0x05, 0x51, 0x23, 0x2D, 0x4D, 0x59, 0x3C, 0xF7, 0x7E, 0x07, 0x31, 0xC9, 0x09, 0xF9, 0xAF,
+  0x97, 0x76, 0x85, 0x14, 0x7F, 0x6A, 0x49, 0x6F, 0x4C, 0x97, 0x60, 0xDB, 0xB2, 0x81, 0x00, 0x44, 0x21, 0x7D, 0xA4, 0xD7, 0x07, 0x0C, 0x5D, 0x8C, 0x41, 0x7D,
+  0x0C, 0x46, 0x0B, 0x3D, 0x43, 0x25, 0xCF, 0x0A, 0x34, 0x98, 0xD8, 0x8E, 0xD3, 0x73, 0xBC, 0xEB, 0x6A, 0x4F, 0xA4, 0x5C, 0x92, 0x73, 0x72, 0x5A, 0x2D, 0xF2,
+  0xAB, 0x62, 0xBB, 0x84, 0xE5, 0xFA, 0x8F, 0xC0, 0xF6, 0xBF, 0xAD, 0x6B, 0x51, 0x54, 0x63, 0xB5, 0x8E, 0x62, 0x05, 0x79, 0x5C, 0xAF, 0xA2, 0x5A, 0xA2, 0x24,
+  0x3C, 0xC1, 0xF2, 0x61, 0xCF, 0xB5, 0x8D, 0x70, 0xEC, 0x0A, 0x43, 0xCF, 0x64, 0x60, 0xE4, 0x33, 0x07, 0xE3, 0x8B, 0x2B, 0x4D, 0x3F, 0x5C, 0x23, 0x42, 0x51,
+  0x39, 0x7C, 0x53, 0x8B, 0xD7, 0x69, 0x09, 0x27, 0xDD, 0xE7, 0x13, 0x5D, 0xEA, 0x0B, 0xDF, 0xA1, 0xD8, 0x56, 0xEB, 0xC5, 0xBA, 0xC2, 0xDD, 0x4F, 0x6B, 0x86,
+  0x3E, 0x53, 0x03, 0x8B, 0x1E, 0x19, 0xED, 0xA9, 0xCF, 0x6E, 0x6B, 0x34, 0xA6, 0x2B, 0x7F, 0x4F, 0x45, 0xFC, 0x78, 0xF5, 0x50, 0x09, 0xEF, 0x00, 0xA4, 0x14,
+  0xF5, 0x8F, 0x83, 0x1A, 0x55, 0x17, 0x57, 0x59, 0x47, 0x1E, 0xE3, 0xE8, 0x68, 0xAB, 0x55, 0xC3, 0xDC, 0x94, 0x74, 0xA1, 0x7A, 0x51, 0x8D, 0x7A, 0x5F, 0xFD,
+  0x78, 0x9E, 0x4D, 0x50, 0x50, 0x3F, 0x4E, 0x27, 0x3F, 0xF5, 0xA8, 0xDC, 0xBA, 0x45, 0x2C, 0xA2, 0x68, 0x4A, 0xA5, 0xE5, 0x88, 0x83, 0x98, 0xC5, 0xD2, 0xA7,
+  0x85, 0x4C, 0xD6, 0xB3, 0x31, 0xF0, 0x62, 0x96, 0x44, 0xEE, 0x33, 0x67, 0x33, 0xF2, 0xCC, 0x65, 0x97, 0x0F, 0xF6, 0xB0, 0x0F, 0x9D, 0x01, 0xC8, 0xA4, 0xE9,
+  0x30, 0x4A, 0x32, 0x97, 0x07, 0xD9, 0x0B, 0xA2, 0x80, 0xF9, 0x2E, 0xAB, 0x70, 0x80, 0xAC, 0xDA, 0x22, 0x2D, 0xA3, 0xCA, 0xB5, 0xB2, 0xCC, 0xC2, 0xE4, 0x23,
+  0x59, 0xE5, 0x21, 0xCF, 0xB9, 0x09, 0xB7, 0x97, 0xC4, 0x15, 0xAB, 0x0A, 0xB4, 0xFC, 0xAB, 0x23, 0xEE, 0x4A, 0x8C, 0xF5, 0xF0, 0x04, 0x66, 0xA6, 0xB4, 0xCA,
+  0xB1, 0xE3, 0x05, 0x6B, 0x06, 0xC0, 0x8A, 0xE3, 0x5F, 0xDA, 0x3B, 0xB5, 0xBA, 0xEE, 0x52, 0x9D, 0x2A, 0x57, 0xC7, 0x0C, 0xCD, 0xE1, 0x14, 0x6B, 0xCD, 0x64,
+  0x59, 0x94, 0x92, 0x47, 0xD0, 0xF8, 0xFC, 0x25, 0x26, 0x06, 0x61, 0x39, 0x74, 0x66, 0x34, 0x1D, 0xA8, 0xAB, 0x13, 0x2A, 0x2D, 0xE5, 0xC3, 0xCC, 0xB6, 0x2C,
+  0x56, 0x1A, 0x0B, 0xA6, 0x31, 0x6F, 0x4D, 0xE7, 0x81, 0xF0, 0xD7, 0x05, 0xA5, 0x1E, 0x44, 0x29, 0x4A, 0x97, 0x35, 0xA0, 0xA6, 0x87, 0xD5, 0x18, 0xD9, 0xD1,
+  0x14, 0x45, 0xD2, 0xD3, 0xAE, 0x48, 0x29, 0xAA, 0x5A, 0xE5, 0x8E, 0x63, 0xAD, 0x44, 0x32, 0xD0, 0x81, 0x72, 0xE5, 0xAD, 0x79, 0x06, 0x2B, 0x3E, 0x91, 0xD2,
+  0x97, 0x73, 0x4B, 0x72, 0x1A, 0xB0, 0x57, 0x34, 0xBB, 0x72, 0x8F, 0x53, 0x6D, 0x5C, 0x02, 0xB2, 0xF5, 0x16, 0x92, 0x66, 0x4B, 0x9E, 0x51, 0x09, 0x92, 0x71,
+  0x17, 0x13, 0x2D, 0xAE, 0x4A, 0xE7, 0x5A, 0x55, 0x39, 0xCE, 0xF6, 0x95, 0xD5, 0x70, 0x67, 0xFB, 0xC9, 0xC2, 0xBD, 0x33, 0x5A, 0x12, 0xA7, 0x2E, 0x9A, 0x93,
+  0xF5, 0x8C, 0x1D, 0x33, 0x08, 0xCE, 0x5B, 0xB4, 0xB4, 0x4B, 0x59, 0x77, 0xC7, 0xB3, 0x58, 0xF6, 0x95, 0x61, 0x5B, 0xE7, 0x2D, 0xC7, 0x9B, 0x7A, 0x99, 0x7B,
+  0xFC, 0xBE, 0xE0, 0x32, 0xFA, 0xB1, 0xF3, 0x56, 0x6A, 0x7E, 0xB1, 0xC5, 0x4B, 0x25, 0x49, 0xAD, 0xE1, 0xCE, 0x97, 0xCF, 0x9E, 0x3C, 0x39, 0xF9, 0xEB, 0x8E,
+  0x3B, 0x0A, 0x16, 0xF2, 0xFB, 0x47, 0x31, 0x1D, 0x2B, 0xD6, 0xF4, 0xA1, 0x6B, 0x0B, 0x43, 0x88, 0x5E, 0x70, 0xB6, 0xCF, 0x81, 0x66, 0x10, 0xD9, 0x07, 0x26,
+  0x05, 0xB8, 0x49, 0x77, 0x47, 0x87, 0x5E, 0x94, 0x25, 0x40, 0x0F, 0x3E, 0x32, 0x7D, 0x4D, 0x16, 0x9E, 0x4D, 0x38, 0xD3, 0xDC, 0x94, 0xB4, 0x38, 0x4F, 0x46,
+  0xDE, 0x4D, 0xB6, 0x05, 0xBC, 0x51, 0x92, 0x61, 0x32, 0x17, 0xB3, 0x8A, 0x00, 0xA2, 0x18, 0x2F, 0x4E, 0x93, 0xAB, 0xC8, 0xA3, 0xCD, 0x94, 0x62, 0x01, 0x65,
+  0xBE, 0x19, 0x3B, 0x58, 0x7F, 0x20, 0x12, 0x50, 0x95, 0x60, 0x8A, 0xEB, 0x85, 0xC2, 0x54, 0x16, 0x54, 0x95, 0x6A, 0xAA, 0x2C, 0xA3, 0x4C, 0x1B, 0x8A, 0x56,
+  0x80, 0xB4, 0x3D, 0x0E, 0x5D, 0xA4, 0x95, 0x43, 0xCA, 0xF2, 0x35, 0x2A, 0xDC, 0x1A, 0x7E, 0x78, 0xF5, 0xEE, 0x7F, 0x8D, 0xF7, 0x6F, 0x7F, 0xD7, 0x72, 0xA8,
+  0x0A, 0x29, 0xB2, 0xD1, 0x35, 0x6A, 0x56, 0xF8, 0x11, 0xD1, 0xA4, 0x25, 0x39, 0xC3, 0x21, 0x50, 0x6F, 0xEF, 0x30, 0x77, 0x8A, 0xF5, 0xA3, 0xAD, 0x43, 0xFC,
+  0x33, 0x6F, 0xA2, 0x7F, 0x83, 0x96, 0x41, 0xF6, 0x9B, 0x5F, 0x5C, 0x99, 0xCE, 0x92, 0xAE, 0x0E, 0xEA, 0xB4, 0x35, 0x2F, 0x5A, 0xDA, 0x6C, 0xD2, 0xB0, 0xC4,
+  0x34, 0x56, 0x0C, 0x71, 0x9A, 0xCA, 0xAD, 0xE1, 0x25, 0x0B, 0xCF, 0xF6, 0xC5, 0xAD, 0x0A, 0xAE, 0x95, 0xD7, 0x0D, 0x4D, 0x16, 0xE2, 0x50, 0x26, 0x42, 0x65,
+  0x8C, 0x9F, 0xF8, 0x58, 0x82, 0x4B, 0x54, 0xA9, 0xC5, 0x79, 0x95, 0xEB, 0x71, 0xC9, 0xD6, 0xF0, 0x07, 0xC6, 0x1D, 0x22, 0xA0, 0x51, 0x8B, 0xF1, 0x90, 0x69,
+  0xEE, 0xA3, 0xA6, 0xEA, 0x8F, 0xE5, 0x59, 0xCE, 0x49, 0xF5, 0x68, 0x36, 0x0C, 0x84, 0xAB, 0x41, 0xF7, 0x47, 0xBD, 0x9E, 0x31, 0x78, 0xFF, 0xBD, 0xD1, 0xEB,
+  0xD5, 0xC8, 0xEC, 0x2D, 0xB8, 0x3A, 0x49, 0xFE, 0x1F, 0x3E, 0x6E, 0x0D, 0x7F, 0xFA, 0xF0, 0xE6, 0x45, 0x07, 0x7E, 0xE1, 0xC1, 0xCD, 0xE1, 0xE0, 0xE0, 0x60,
+  0xF7, 0x6C, 0x5F, 0x64, 0x69, 0x0E, 0xEB, 0x18, 0x7C, 0xE5, 0xB0, 0x06, 0x4F, 0x01, 0xEB, 0x60, 0x70, 0xBC, 0x06, 0xAC, 0xA3, 0xD6, 0xF0, 0xED, 0x6B, 0x01,
+  0xE9, 0xC9, 0x60, 0x1D, 0xA4, 0x06, 0xD0, 0x4A, 0xC2, 0x09, 0xE8, 0xDC, 0x3C, 0x39, 0x79, 0xBA, 0x06, 0x24, 0x2C, 0xB9, 0xBE, 0xFC, 0x19, 0xA0, 0xB0, 0xC6,
+  0xEE, 0x06, 0xD4, 0x5A, 0x03, 0x12, 0x94, 0x8E, 0x00, 0xC1, 0xA6, 0xDF, 0x1C, 0x3F, 0x5D, 0x03, 0xD0, 0x33, 0x10, 0x89, 0x00, 0x01, 0xC8, 0xCD, 0xD1, 0x3A,
+  0x54, 0xC2, 0xCA, 0xF4, 0x57, 0xDF, 0x7C, 0xDD, 0x39, 0x46, 0xCB, 0x06, 0xCF, 0x4E, 0x9A, 0xC0, 0x81, 0xEC, 0xA5, 0x41, 0x3D, 0x69, 0x0D, 0x81, 0x0A, 0xA1,
+  0x13, 0x41, 0x81, 0x58, 0x0A, 0x19, 0xFD, 0xC9, 0x0D, 0x10, 0xAD, 0xC2, 0x42, 0x77, 0xCC, 0xC9, 0xA2, 0x80, 0x77, 0xC5, 0x7B, 0xB5, 0x15, 0xA4, 0xF6, 0xA4,
+  0x35, 0xFC, 0x1B, 0xB5, 0x9B, 0x2A, 0x1A, 0x1C, 0xAF, 0xD1, 0x6E, 0x48, 0x3F, 0xCA, 0x13, 0x8C, 0x95, 0x41, 0x40, 0xE8, 0xDF, 0x72, 0x64, 0x08, 0xD0, 0xE1,
+  0x93, 0x46, 0xC4, 0x4B, 0x43, 0x82, 0xC8, 0xFF, 0x8D, 0xB8, 0x00, 0x20, 0x37, 0x87, 0xC7, 0x6B, 0x28, 0x0F, 0x44, 0x1E, 0x8A, 0x03, 0x6D, 0x7E, 0xBA, 0xBA,
+  0x88, 0x02, 0x17, 0xDE, 0x2A, 0xD8, 0x05, 0x32, 0x0B, 0xAB, 0x23, 0x03, 0x59, 0x7F, 0x76, 0x72, 0xF3, 0xEC, 0xA4, 0x1E, 0x00, 0xB2, 0xE7, 0x64, 0x1B, 0xCB,
+  0x2C, 0x7E, 0x79, 0x87, 0x50, 0x66, 0xEC, 0xFF, 0xB5, 0xC4, 0x10, 0x2E, 0xBC, 0x6D, 0x6C, 0xEA, 0x65, 0x39, 0xD0, 0x44, 0x5C, 0xD4, 0xB3, 0xF2, 0x0A, 0x26,
+  0xF1, 0x6A, 0xA2, 0xD6, 0xF0, 0xB8, 0x46, 0x6F, 0x9A, 0x72, 0xB7, 0x78, 0xD9, 0x14, 0xFE, 0xBC, 0x8B, 0x27, 0xC9, 0xA3, 0xCE, 0x1D, 0xDA, 0x70, 0x14, 0x77,
+  0xE7, 0xB0, 0x2C, 0x2B, 0x75, 0x23, 0x1A, 0x5C, 0xCD, 0x9B, 0xD6, 0xF0, 0xE4, 0xA8, 0xB2, 0xFB, 0x5D, 0x9D, 0x19, 0x23, 0x1E, 0x2C, 0x70, 0x59, 0x10, 0x34,
+  0xE6, 0x47, 0x52, 0xB4, 0x35, 0x7C, 0x19, 0x5F, 0xAF, 0xC3, 0x95, 0xDE, 0x60, 0x0D, 0xB6, 0x28, 0xE8, 0x08, 0xCE, 0xF4, 0xE0, 0x60, 0x71, 0xD6, 0x24, 0x8E,
+  0xD6, 0xFD, 0x32, 0xA6, 0x0A, 0xDB, 0x75, 0xF8, 0x42, 0x83, 0x05, 0xDF, 0x0C, 0xA2, 0xB4, 0xFA, 0x5C, 0x89, 0x0A, 0xA2, 0x2F, 0x91, 0x57, 0x5B, 0xE3, 0x48,
+  0x8C, 0xCA, 0x9F, 0x80, 0x1F, 0x81, 0x19, 0x2E, 0xC5, 0xBA, 0xAD, 0xC6, 0x1C, 0x49, 0x8A, 0xC2, 0x75, 0x89, 0xAF, 0xB7, 0xC6, 0x15, 0x05, 0x9D, 0x3F, 0x03,
+  0x5F, 0x16, 0x6C, 0x8C, 0xBD, 0x71, 0x1F, 0xD9, 0x64, 0x82, 0x0E, 0xAB, 0x39, 0x6F, 0x52, 0xC5, 0xC1, 0x1F, 0xF1, 0xDF, 0xB8, 0xE0, 0xFF, 0x1B, 0x8F, 0x23,
+  0x32, 0xE0, 0x56, 0x1F, 0x4C, 0x64, 0x7B, 0x6F, 0x19, 0x50, 0xA7, 0x21, 0x7D, 0x74, 0xD5, 0x1A, 0x7E, 0xEB, 0xC5, 0x78, 0xAE, 0xEE, 0x60, 0x7C, 0xCB, 0xA6,
+  0x3C, 0x5E, 0xBD, 0x8E, 0x9F, 0xF3, 0xC6, 0x37, 0x6F, 0xF9, 0x86, 0xC8, 0x75, 0xBC, 0xAE, 0x1F, 0xE0, 0x8F, 0xFE, 0x88, 0x58, 0xDB, 0x3A, 0x3E, 0xE0, 0x1B,
+  0x1F, 0xCB, 0xEB, 0xD7, 0x83, 0x02, 0x67, 0xF4, 0x25, 0x2E, 0xD6, 0x03, 0x02, 0xD7, 0xF8, 0x92, 0x2D, 0x6C, 0xF3, 0x73, 0x70, 0xB7, 0xCC, 0xEB, 0x51, 0x63,
+  0xB5, 0x40, 0x99, 0xD6, 0xF0, 0xC5, 0x2F, 0x2F, 0x1B, 0x1B, 0x29, 0x31, 0xEB, 0x5B, 0x47, 0xC2, 0x93, 0xD8, 0x09, 0x55, 0x96, 0x0B, 0x6A, 0xE9, 0x35, 0xA7,
+  0x6E, 0x60, 0x4B, 0xD3, 0xAE, 0x08, 0x41, 0x3E, 0x49, 0xD6, 0x52, 0x9A, 0x59, 0xAF, 0x8D, 0x0F, 0x67, 0xC1, 0x80, 0xC4, 0xC7, 0x29, 0x42, 0x9A, 0xAB, 0x30,
+  0x89, 0x17, 0xE4, 0x9C, 0x32, 0xDE, 0xE0, 0x6A, 0x53, 0xEC, 0x12, 0xD5, 0x6E, 0x8D, 0x67, 0xB2, 0xD5, 0xDB, 0x66, 0x1C, 0x10, 0x99, 0x7B, 0x56, 0xF3, 0x90,
+  0x95, 0x2C, 0xD7, 0x1A, 0x82, 0x6B, 0xEF, 0x71, 0xD1, 0xB8, 0x97, 0x89, 0x00, 0x3C, 0x70, 0xF7, 0xF2, 0x02, 0x3B, 0xE5, 0xD6, 0xE9, 0x59, 0x2E, 0xB1, 0x3E,
+  0x13, 0x83, 0xB4, 0xD5, 0xBB, 0x95, 0x57, 0x8E, 0xB7, 0xB4, 0x56, 0x87, 0x80, 0x3E, 0xE5, 0xBB, 0xC9, 0x04, 0x5B, 0xF7, 0xD7, 0x8A, 0x2A, 0x78, 0xF3, 0x9A,
+  0xE5, 0x1F, 0xD8, 0x8A, 0xB3, 0x71, 0x73, 0x03, 0xC1, 0xC6, 0xE0, 0xE2, 0xC5, 0x2B, 0xE3, 0xF2, 0xE2, 0xDB, 0xCB, 0xEF, 0x7E, 0xD8, 0x8C, 0x75, 0x40, 0x9D,
+  0x5B, 0x32, 0x0C, 0xD4, 0xDA, 0xAD, 0x1B, 0x73, 0x36, 0x1E, 0xAC, 0xC2, 0x27, 0x48, 0x3B, 0x31, 0xEA, 0xF5, 0xE5, 0xF7, 0x9B, 0xE2, 0x12, 0x9C, 0xFD, 0x6D,
+  0xB1, 0x09, 0x8D, 0xDD, 0x3E, 0x9F, 0x3E, 0x3A, 0xEC, 0x8A, 0x39, 0x2B, 0xF0, 0x4A, 0x14, 0x24, 0x7E, 0x19, 0xEF, 0xE8, 0x6A, 0x6B, 0x03, 0xB9, 0x18, 0x95,
+  0x3F, 0xC1, 0x30, 0x0E, 0x52, 0xF1, 0x91, 0x23, 0xBD, 0x8A, 0xF2, 0x88, 0x92, 0xAD, 0xE1, 0xC5, 0x0D, 0x56, 0xC7, 0x60, 0xD3, 0xF6, 0x3A, 0x1C, 0x41, 0x08,
+  0x7A, 0x0D, 0x86, 0x44, 0xA8, 0x08, 0x8E, 0x80, 0xFC, 0x9C, 0x21, 0x34, 0xA1, 0xA3, 0xCC, 0xF5, 0x21, 0x62, 0x78, 0x8F, 0x5C, 0x21, 0xE0, 0x0F, 0xC9, 0x98,
+  0xE9, 0x0A, 0xFD, 0xCE, 0x94, 0xFA, 0x9D, 0x37, 0xAF, 0x36, 0x63, 0xCA, 0x50, 0xD9, 0x96, 0x2C, 0x19, 0x35, 0x73, 0x7B, 0x86, 0xCC, 0x90, 0xF3, 0xED, 0x11,
+  0x15, 0x56, 0x1C, 0x44, 0xC8, 0x82, 0x18, 0x3B, 0xAF, 0x32, 0x80, 0x50, 0x34, 0xE7, 0xF0, 0x66, 0x1D, 0xD5, 0x89, 0xD0, 0x48, 0x6B, 0xCE, 0x51, 0xA2, 0x37,
+  0x8F, 0xEF, 0x55, 0x6B, 0x8E, 0x2A, 0xB1, 0x5D, 0x47, 0x69, 0xA8, 0x25, 0x63, 0x66, 0x63, 0xE6, 0x7D, 0xDA, 0x98, 0x21, 0x4A, 0x59, 0xC1, 0x13, 0xE3, 0x95,
+  0xF8, 0xB7, 0x0E, 0x6F, 0x06, 0xEB, 0xF0, 0x46, 0xC5, 0x28, 0xCD, 0x9E, 0x93, 0x07, 0xEA, 0x69, 0x68, 0xDE, 0xEC, 0x21, 0xE7, 0x3C, 0x16, 0xCD, 0x6D, 0x1A,
+  0xCA, 0x20, 0x30, 0xF4, 0xFD, 0x66, 0x6C, 0x1A, 0x55, 0x56, 0xD3, 0xA6, 0xAD, 0x65, 0xC1, 0x78, 0xA3, 0xB6, 0x3E, 0x8C, 0x5E, 0x81, 0x1B, 0x28, 0x83, 0xE1,
+  0xF3, 0x86, 0xB8, 0x41, 0x95, 0x6D, 0xA7, 0x87, 0xE1, 0xCD, 0xDC, 0x36, 0x7F, 0x7C, 0xF3, 0xFA, 0xE3, 0x74, 0x6E, 0x36, 0xE6, 0x91, 0x2C, 0x87, 0xC0, 0xAE,
+  0x79, 0x6D, 0xBC, 0x79, 0xFF, 0x62, 0x23, 0xBC, 0x8A, 0x2A, 0xDD, 0x0E, 0xBF, 0xE2, 0x26, 0x6F, 0x9B, 0x67, 0x58, 0x6B, 0xD6, 0x5C, 0xA9, 0xA8, 0x50, 0x6B,
+  0xF8, 0x8E, 0xE1, 0x4C, 0x9C, 0x57, 0x9E, 0x2F, 0x8F, 0xC8, 0xDB, 0x08, 0xD7, 0x78, 0xCD, 0xDB, 0x61, 0x99, 0x68, 0xF4, 0xB6, 0xF9, 0x35, 0x9B, 0xDB, 0xBE,
+  0xEF, 0xF9, 0x8D, 0x59, 0x26, 0xCB, 0x21, 0x4C, 0xD5, 0x7B, 0xCF, 0xAF, 0x36, 0xC2, 0xAE, 0xA8, 0xD6, 0xED, 0x70, 0x2C, 0x6E, 0xF3, 0xB6, 0x99, 0x76, 0x35,
+  0x71, 0xEC, 0x45, 0x63, 0x96, 0xF1, 0x52, 0x58, 0x79, 0xD6, 0xFB, 0x1A, 0xBF, 0x1B, 0x61, 0x97, 0xA8, 0x71, 0x3B, 0xCC, 0x92, 0xAD, 0xDD, 0x36, 0xAB, 0xAC,
+  0xF1, 0x75, 0x63, 0x46, 0xA1, 0x4C, 0x6B, 0xF8, 0xFA, 0xD5, 0x2F, 0x46, 0xE7, 0xB5, 0x77, 0x8D, 0x7D, 0x71, 0xBF, 0x33, 0xE3, 0xE2, 0x5B, 0xAC, 0xC0, 0xDA,
+  0x00, 0xC7, 0xA8, 0xEA, 0xED, 0xF0, 0x8B, 0x37, 0x7A, 0xDB, 0xDC, 0xE2, 0x7B, 0x80, 0xB0, 0x0C, 0x7E, 0x85, 0xB5, 0x2F, 0xA2, 0x20, 0xAD, 0x7D, 0xC1, 0x95,
+  0xF1, 0xD2, 0xDC, 0x8C, 0x41, 0x8C, 0xEB, 0xDD, 0x84, 0xD3, 0x9E, 0x34, 0x72, 0xFB, 0x5E, 0x86, 0x55, 0x83, 0x45, 0x69, 0x17, 0xC3, 0xFA, 0x48, 0xDB, 0x69,
+  0x68, 0x9B, 0x29, 0x16, 0xF2, 0xBD, 0xBB, 0x78, 0x6D, 0x7C, 0x13, 0xFD, 0xAD, 0xD1, 0x9A, 0x95, 0x63, 0x76, 0x45, 0x43, 0xDB, 0x34, 0x3E, 0xE9, 0xC1, 0xED,
+  0xE0, 0x31, 0x42, 0x0E, 0xEB, 0x0C, 0x6F, 0x8B, 0xC2, 0xA8, 0x8F, 0x1F, 0xAF, 0xC9, 0x13, 0x75, 0x33, 0x86, 0x3C, 0xC5, 0xB0, 0x4A, 0x49, 0xE4, 0xA6, 0x00,
+  0x3E, 0x9C, 0xC7, 0xF2, 0x7F, 0x9C, 0x4E, 0xE8, 0x20, 0x84, 0xFD, 0x86, 0x85, 0xC6, 0x25, 0x5D, 0xD6, 0xDC, 0x05, 0xA0, 0x40, 0x89, 0xB6, 0x00, 0xE1, 0xFC,
+  0x50, 0x73, 0x8E, 0xB9, 0x3E, 0x3A, 0xDF, 0x11, 0xB0, 0xE8, 0x5F, 0x35, 0xB0, 0xDA, 0xFB, 0x05, 0xF8, 0x06, 0x21, 0xDA, 0xF1, 0x93, 0x3E, 0x8E, 0x15, 0xA2,
+  0x2F, 0xB6, 0xFF, 0x0D, 0xCF, 0x70, 0x60, 0x85, 0x1B, 0x65, 0xE3, 0x7B, 0xE3, 0xAE, 0xE5, 0x66, 0xA7, 0x91, 0xE7, 0x58, 0xC8, 0xF8, 0xC2, 0xBA, 0xA2, 0xA3,
+  0x69, 0x2C, 0x03, 0x7B, 0x1D, 0xE4, 0xB6, 0x1D, 0x2A, 0x02, 0xDD, 0x89, 0x20, 0x54, 0x10, 0x7B, 0xE6, 0x47, 0xE0, 0xC5, 0x06, 0x2B, 0x3A, 0xCC, 0xA3, 0x84,
+  0xDA, 0x05, 0x3B, 0x8D, 0x7C, 0x86, 0xD8, 0x49, 0xB4, 0xC3, 0x44, 0xB3, 0x01, 0x4D, 0xBB, 0xEF, 0xE8, 0x07, 0x36, 0xB5, 0x03, 0xE0, 0x68, 0x80, 0x4F, 0xFB,
+  0x7C, 0xAF, 0x86, 0xD0, 0x90, 0x7A, 0xFB, 0x80, 0xD4, 0x2A, 0xE5, 0x2E, 0x46, 0xED, 0xEE, 0xAE, 0x46, 0x5D, 0x48, 0x76, 0x2F, 0x56, 0x1A, 0x62, 0x95, 0x14,
+  0x62, 0xF9, 0xF9, 0xEC, 0x98, 0x76, 0x9D, 0x18, 0x51, 0xD3, 0xB0, 0xED, 0xEB, 0xB8, 0x6A, 0xE9, 0x79, 0xE5, 0x96, 0x21, 0xB4, 0x74, 0xE5, 0x1D, 0x43, 0x44,
+  0x25, 0x2C, 0x3D, 0x9A, 0x76, 0x8D, 0xF7, 0x66, 0xF0, 0xA9, 0x6B, 0xFC, 0x4C, 0x0A, 0xBF, 0xC1, 0x8D, 0x43, 0x84, 0x3B, 0xF6, 0x32, 0xC6, 0x5D, 0x47, 0x6E,
+  0xF3, 0x90, 0x58, 0x5F, 0x1C, 0xFD, 0x43, 0xC4, 0x4D, 0x6C, 0x1E, 0x52, 0x42, 0x6F, 0x37, 0x87, 0xB4, 0x29, 0xE2, 0xDE, 0xF6, 0x0F, 0xDD, 0x4B, 0x93, 0xE6,
+  0x20, 0x66, 0xCD, 0x26, 0xE1, 0x9F, 0x68, 0x12, 0x2E, 0xE2, 0x26, 0x3D, 0xBD, 0xCF, 0x1D, 0x51, 0xF7, 0xD2, 0x22, 0x39, 0xB1, 0xF3, 0x99, 0x34, 0xA9, 0xD6,
+  0x26, 0x2F, 0x2E, 0xDB, 0xF7, 0xB5, 0xC7, 0x4B, 0x6B, 0x0C, 0x71, 0x2A, 0x43, 0x3D, 0x9D, 0xA7, 0x9E, 0xE6, 0xDE, 0x74, 0x9E, 0x7A, 0xB0, 0x55, 0x75, 0x5E,
+  0x96, 0x55, 0x74, 0x7E, 0x83, 0xCA, 0x1E, 0x21, 0xFE, 0x27, 0x53, 0xF8, 0xA8, 0x59, 0x0D, 0x94, 0x5E, 0xDB, 0xAC, 0xCD, 0x6A, 0x48, 0x2C, 0x09, 0x90, 0xCD,
+  0xFB, 0xD3, 0x90, 0x02, 0xB9, 0x5D, 0x49, 0x48, 0xA5, 0xCD, 0x19, 0x6E, 0xA6, 0x4F, 0xE2, 0x9E, 0x94, 0xCA, 0x4E, 0x59, 0x3B, 0xED, 0x3C, 0x3A, 0xC2, 0x7E,
+  0x19, 0xEE, 0x36, 0xDD, 0x07, 0x7B, 0xEA, 0x6F, 0x26, 0x7D, 0x60, 0xA7, 0x8C, 0x36, 0xBE, 0x2D, 0xE0, 0x07, 0x37, 0x76, 0xCC, 0xB0, 0xBF, 0xB8, 0x99, 0x2F,
+  0x96, 0xAD, 0x69, 0x73, 0xFE, 0xD8, 0x6A, 0xD2, 0xAA, 0x12, 0x4C, 0xE2, 0x0E, 0x8B, 0x43, 0xDB, 0xAA, 0x07, 0x1F, 0xE2, 0x96, 0x6B, 0x06, 0xCD, 0x8A, 0x51,
+  0x88, 0x8B, 0x15, 0x8D, 0x89, 0xB9, 0x21, 0x94, 0x41, 0x0C, 0x5C, 0x47, 0x76, 0xCD, 0xF0, 0x26, 0x13, 0xFE, 0xAC, 0x9E, 0x27, 0x64, 0x30, 0x82, 0x4F, 0x94,
+  0x7E, 0x80, 0xCA, 0x4B, 0x46, 0xC4, 0x09, 0x86, 0x31, 0x6E, 0x5C, 0xC4, 0xA4, 0xA0, 0xDD, 0x1B, 0x09, 0xB0, 0xA0, 0x90, 0x48, 0xF0, 0xFA, 0x9B, 0x9F, 0x75,
+  0x34, 0x10, 0xBA, 0x76, 0x90, 0x27, 0x01, 0x36, 0x86, 0xAD, 0xBA, 0x31, 0x1C, 0x19, 0x6A, 0x52, 0x8B, 0x8F, 0x5A, 0x05, 0xB5, 0x8E, 0x26, 0xC9, 0x9E, 0xB1,
+  0x75, 0x4C, 0x96, 0x86, 0x02, 0x58, 0x1C, 0x4F, 0xAB, 0x42, 0x8D, 0xEF, 0x55, 0x0D, 0xA8, 0x25, 0x07, 0x18, 0x4B, 0xD7, 0x97, 0x03, 0x0B, 0x24, 0x5B, 0x59,
+  0x0C, 0x80, 0xA3, 0x56, 0x0C, 0xEE, 0x8B, 0x06, 0x58, 0x14, 0x4A, 0xCD, 0x6F, 0x2C, 0x06, 0xE8, 0x00, 0x6B, 0x89, 0x01, 0xDA, 0x2E, 0xC4, 0x20, 0xD9, 0x50,
+  0x98, 0xAC, 0x18, 0xAA, 0x20, 0x96, 0x22, 0x05, 0x4F, 0x20, 0x05, 0x87, 0x83, 0x27, 0xF5, 0x34, 0x61, 0x73, 0x36, 0xF7, 0x9A, 0xD6, 0x78, 0x34, 0xB5, 0xB7,
+  0xBF, 0xD8, 0xAE, 0xE5, 0x5D, 0x37, 0x33, 0xB9, 0x6A, 0x45, 0x9F, 0xBB, 0xB9, 0x6D, 0x36, 0x6A, 0xA5, 0x50, 0x4B, 0x0F, 0x81, 0xA4, 0x4B, 0x84, 0xAD, 0x10,
+  0xE4, 0xCC, 0x1F, 0x7B, 0x90, 0xDA, 0x91, 0x14, 0xE5, 0xAE, 0xE7, 0x04, 0xE4, 0xD7, 0x60, 0x7F, 0xF3, 0xB5, 0xB1, 0xC2, 0x8E, 0xF4, 0x82, 0x15, 0xE1, 0xD8,
+  0xCB, 0x6C, 0xAC, 0xB0, 0x73, 0xBF, 0xFE, 0x9A, 0x75, 0x3A, 0x45, 0xC1, 0x58, 0xED, 0x18, 0x85, 0xCA, 0xE5, 0xDB, 0x8A, 0xEF, 0xB2, 0x5E, 0xBC, 0x42, 0x68,
+  0x2B, 0x7C, 0xAC, 0x7A, 0x7B, 0x6E, 0xB3, 0x02, 0x20, 0x8B, 0x83, 0xA7, 0x58, 0xDE, 0x8E, 0xAB, 0x87, 0xF6, 0x0C, 0x3F, 0x9C, 0x2A, 0xC6, 0x2C, 0xAE, 0xBC,
+  0xA1, 0x31, 0x4B, 0xFC, 0x7C, 0x08, 0xD3, 0xD6, 0x07, 0x2F, 0x7F, 0xD7, 0x34, 0x09, 0xF1, 0xDF, 0x55, 0x9B, 0x74, 0x74, 0x5F, 0x4D, 0x5A, 0xA3, 0xAB, 0x8A,
+  0xA5, 0x2B, 0xF4, 0x42, 0x3C, 0x9F, 0x70, 0x55, 0xE1, 0x12, 0xA5, 0x21, 0x5B, 0xC2, 0xE6, 0x1A, 0x97, 0x68, 0xEA, 0x46, 0x05, 0x2C, 0x42, 0xA0, 0x1E, 0x33,
+  0xE2, 0x48, 0x4B, 0xC2, 0x0C, 0x98, 0x97, 0xCF, 0x4B, 0xBE, 0x44, 0x8B, 0xEA, 0x8A, 0x97, 0xA6, 0x45, 0xB0, 0x66, 0x9F, 0x8F, 0x78, 0xE1, 0x78, 0x32, 0x4A,
+  0x5D, 0xD9, 0x78, 0x89, 0xE2, 0x64, 0xBC, 0xF8, 0xD5, 0xE6, 0x05, 0x2C, 0xC6, 0x60, 0x65, 0x7E, 0xE0, 0xC0, 0x93, 0xCF, 0xCC, 0x82, 0x89, 0x26, 0xAD, 0x21,
+  0x62, 0x38, 0x36, 0x65, 0x73, 0x22, 0xA6, 0x4C, 0x23, 0xC9, 0x7E, 0x50, 0x3A, 0x30, 0x3C, 0x5A, 0x99, 0x72, 0x68, 0x9A, 0xCC, 0x24, 0xE9, 0x7B, 0xE5, 0xB3,
+  0x7D, 0x38, 0x85, 0x9A, 0x23, 0xD7, 0xF4, 0x78, 0x9E, 0x89, 0xC7, 0xBE, 0x15, 0x1C, 0x97, 0x16, 0x1F, 0xD3, 0xC6, 0xE7, 0xB9, 0x92, 0x03, 0x41, 0x63, 0x47,
+  0x33, 0x7B, 0x50, 0x68, 0xE5, 0x91, 0x68, 0x67, 0xA6, 0xDC, 0x93, 0x7F, 0x45, 0x73, 0x69, 0x34, 0x29, 0x67, 0xCC, 0x7C, 0x36, 0x39, 0x6F, 0x7D, 0x19, 0xC3,
+  0x94, 0xD4, 0xA2, 0x2C, 0x2D, 0x03, 0x26, 0xD9, 0x75, 0x3C, 0x93, 0x9C, 0x55, 0x73, 0x81, 0x7D, 0xFC, 0xAC, 0xFF, 0xDB, 0x82, 0x82, 0xBC, 0xB8, 0x79, 0xB6,
+  0x6F, 0xD6, 0x9B, 0xC7, 0xE5, 0x47, 0x8B, 0xCA, 0x99, 0x76, 0xBA, 0x8C, 0x27, 0xF1, 0xFE, 0xEF, 0xFF, 0x55, 0x85, 0x66, 0xE8, 0xE1, 0x7F, 0x09, 0x01, 0x20,
+  0x46, 0xFE, 0xF8, 0xBC, 0x05, 0x4C, 0x7D, 0x2F, 0x80, 0x2B, 0x6A, 0x63, 0x92, 0xAE, 0x80, 0x72, 0x05, 0xD4, 0xDE, 0xD7, 0x91, 0x3B, 0x93, 0x59, 0x33, 0x36,
+  0x39, 0x0B, 0xC6, 0xBE, 0xBD, 0x80, 0xAB, 0x86, 0xC7, 0x00, 0x2F, 0x71, 0x76, 0x5D, 0xD8, 0x47, 0x44, 0xF5, 0xE2, 0x0A, 0x17, 0xEF, 0x28, 0xC2, 0x0C, 0xCA,
+  0x77, 0xDA, 0xAF, 0xBF, 0x7B, 0x4F, 0x07, 0x60, 0x50, 0x1A, 0xE8, 0xC5, 0xAC, 0x76, 0xD7, 0x98, 0x2C, 0x5D, 0xE1, 0xBD, 0x77, 0xB0, 0x6D, 0xC6, 0x0D, 0xC5,
+  0x43, 0x18, 0xAF, 0x4C, 0x1F, 0x47, 0x9F, 0x06, 0xEC, 0xAD, 0x17, 0x84, 0xC6, 0x39, 0x08, 0x2C, 0x21, 0xE2, 0x50, 0x47, 0x7E, 0x48, 0x42, 0x5F, 0xB4, 0x4B,
+  0xE6, 0x14, 0x0D, 0xFF, 0xC9, 0x77, 0x90, 0x35, 0x2E, 0xB5, 0x67, 0xB4, 0x4F, 0x9F, 0x1E, 0xB6, 0x49, 0xFE, 0xE2, 0x2A, 0x26, 0xF4, 0x58, 0x45, 0xE4, 0xEB,
+  0x2C, 0x7D, 0xA7, 0x6B, 0x8C, 0x47, 0xBB, 0xE2, 0x90, 0x44, 0x9E, 0x4C, 0x69, 0xD1, 0xE9, 0xB9, 0xFD, 0x70, 0xC6, 0xDC, 0x4E, 0x82, 0x19, 0x94, 0x61, 0x81,
+  0xF9, 0xDC, 0xD4, 0x13, 0x22, 0xED, 0x49, 0x92, 0xDE, 0x87, 0x43, 0x1F, 0xE2, 0xF9, 0x2E, 0x8F, 0xCE, 0xCF, 0x71, 0x6E, 0xE6, 0x41, 0xFA, 0x41, 0x92, 0xE3,
+  0x51, 0x36, 0x5F, 0x17, 0xA3, 0xC4, 0x54, 0xC2, 0x8F, 0x30, 0x0D, 0xCA, 0x31, 0xBF, 0x77, 0x06, 0x73, 0x32, 0xE7, 0xCC, 0xC6, 0x05, 0xC8, 0x8A, 0x74, 0x76,
+  0xD3, 0x08, 0x76, 0x2C, 0x33, 0x34, 0x65, 0x5B, 0x94, 0x5A, 0x81, 0x49, 0xD7, 0xE0, 0xB7, 0xD4, 0xD3, 0x27, 0xEF, 0x76, 0xFB, 0xA0, 0x21, 0xDA, 0x1B, 0x97,
+  0x66, 0xBE, 0x9F, 0x7D, 0xF4, 0x25, 0x4A, 0xF7, 0x0E, 0xBB, 0x06, 0xDD, 0x49, 0x97, 0x55, 0x90, 0x94, 0x57, 0x77, 0x31, 0xD1, 0xCA, 0xC1, 0x6A, 0x40, 0x0A,
+  0x70, 0xFC, 0xF0, 0xC9, 0x98, 0xD6, 0xB0, 0x3D, 0x98, 0x04, 0x00, 0xC5, 0x30, 0x11, 0x20, 0x7C, 0xC0, 0x2E, 0x1F, 0x3D, 0x77, 0x85, 0x51, 0x54, 0xB8, 0xB6,
+  0xBF, 0x0F, 0x95, 0x86, 0x51, 0x62, 0x90, 0x8A, 0x69, 0xA7, 0x2D, 0x27, 0x30, 0x21, 0x51, 0xED, 0x83, 0x9B, 0xF6, 0x1E, 0x00, 0xE0, 0x44, 0x4C, 0xCC, 0x7D,
+  0x63, 0x7A, 0x19, 0x43, 0x8F, 0xDD, 0x04, 0x1A, 0xBF, 0x4D, 0x20, 0x33, 0xF7, 0x79, 0x3A, 0xAF, 0x24, 0x7B, 0xA3, 0x23, 0xD3, 0xF7, 0xDA, 0xBB, 0x6D, 0x89,
+  0x3C, 0xFF, 0x0F, 0x71, 0xEB, 0x88, 0x8B, 0x1D, 0x8E, 0xE3, 0xAE, 0x71, 0x76, 0x26, 0xAB, 0x11, 0xB9, 0x28, 0x11, 0x99, 0xF8, 0x4F, 0xE6, 0x56, 0x2C, 0x8A,
+  0xBF, 0x7E, 0xF5, 0x47, 0x24, 0xB3, 0x77, 0xFB, 0xC0, 0xFA, 0x39, 0x45, 0x10, 0xBE, 0xFA, 0x03, 0xDF, 0x77, 0x3B, 0x3C, 0x6C, 0xF0, 0xD5, 0x1F, 0xF4, 0x73,
+  0xB7, 0x83, 0x9A, 0x70, 0xCD, 0xEB, 0xBB, 0xFB, 0x95, 0xD3, 0x21, 0x4F, 0x3D, 0x44, 0x89, 0x0B, 0xA8, 0x17, 0x93, 0xAD, 0x31, 0x4E, 0x38, 0xF0, 0xBC, 0x10,
+  0x29, 0xE0, 0x11, 0xF3, 0x7B, 0x8C, 0xDD, 0xCF, 0x5D, 0x23, 0x84, 0x24, 0x47, 0x4C, 0x77, 0xC0, 0x92, 0x88, 0x50, 0xF1, 0x09, 0xA8, 0xF6, 0x84, 0xE7, 0x34,
+  0xA4, 0xAA, 0x24, 0x02, 0x12, 0xE5, 0xC4, 0xC3, 0x2E, 0x02, 0x86, 0x05, 0x28, 0x1D, 0x02, 0x95, 0xC8, 0x5B, 0x01, 0xC5, 0x87, 0xC3, 0x54, 0x13, 0xF8, 0x81,
+  0xC4, 0x37, 0x64, 0x33, 0xDA, 0x92, 0x69, 0xB1, 0xB0, 0xC9, 0x5F, 0xC8, 0x61, 0x82, 0xA9, 0xB8, 0x59, 0x20, 0x87, 0x1F, 0x70, 0x1C, 0x63, 0x87, 0xCE, 0x64,
+  0xCC, 0x9A, 0x8A, 0x1C, 0x89, 0x28, 0xD3, 0x73, 0xFA, 0x02, 0x5D, 0xE8, 0xA7, 0x90, 0x3F, 0x80, 0x2A, 0x5C, 0xF8, 0x0E, 0x0F, 0x01, 0x7C, 0xBC, 0xE9, 0xC2,
+  0x78, 0xD1, 0xC5, 0x2D, 0x34, 0xC3, 0xB5, 0xE8, 0x3F, 0xFD, 0xE0, 0x9F, 0x68, 0x14, 0x25, 0xC8, 0x2B, 0xA4, 0x71, 0x9F, 0x95, 0x92, 0xC4, 0x05, 0xE5, 0xE2,
+  0x3E, 0x06, 0xCF, 0x25, 0xAE, 0x90, 0x46, 0x67, 0x7E, 0x40, 0x76, 0xBB, 0xC6, 0xC8, 0x76, 0x5D, 0x7E, 0x51, 0x81, 0x7D, 0xD2, 0xD5, 0x3F, 0x0F, 0x6E, 0xD0,
+  0x02, 0x89, 0xDA, 0xDD, 0x4E, 0x70, 0x1B, 0xFF, 0xBB, 0xBD, 0xDB, 0x61, 0x74, 0x8F, 0x23, 0x89, 0x6B, 0xBA, 0xC3, 0x31, 0xBD, 0xDB, 0x01, 0x7E, 0x74, 0x27,
+  0x42, 0x98, 0x27, 0xD0, 0xED, 0x08, 0xEF, 0xBB, 0x9D, 0x90, 0xEE, 0x4B, 0xE4, 0xF1, 0x8F, 0x6E, 0xCA, 0x16, 0x20, 0x33, 0x2F, 0x2B, 0x9B, 0x81, 0xBF, 0xBC,
+  0xA4, 0x6C, 0x0B, 0x30, 0xE0, 0x0F, 0x74, 0x07, 0x12, 0xA2, 0x4D, 0x77, 0x3B, 0xB2, 0x4D, 0x48, 0x92, 0x57, 0x59, 0x52, 0x93, 0x4D, 0x08, 0xA5, 0x15, 0x79,
+  0x29, 0x3A, 0x69, 0xA5, 0xFF, 0x80, 0x7E, 0x5C, 0x38, 0x8C, 0x2E, 0x5F, 0xDE, 0x7E, 0x63, 0x75, 0xDA, 0x72, 0x42, 0xB6, 0x4D, 0x36, 0x4C, 0x2D, 0xD3, 0xF7,
+  0xDC, 0xB1, 0x63, 0xE3, 0xF1, 0x31, 0x90, 0xB7, 0x5D, 0xE3, 0x7C, 0x28, 0xED, 0x18, 0x09, 0x34, 0xB2, 0xAB, 0x42, 0x5A, 0x08, 0x3A, 0x9A, 0x52, 0x6C, 0xEF,
+  0xF6, 0xB9, 0x1C, 0x4A, 0x59, 0x23, 0x10, 0x52, 0x05, 0xEB, 0xC1, 0xA0, 0xCC, 0x1A, 0x18, 0x39, 0x6D, 0x29, 0x05, 0xC2, 0x73, 0x2B, 0x50, 0x38, 0x18, 0xD5,
+  0xD4, 0xA2, 0xA7, 0x48, 0x59, 0xD9, 0x12, 0xAD, 0x8E, 0x14, 0xF8, 0x51, 0x56, 0x81, 0xC1, 0x2A, 0x3F, 0xEC, 0xB4, 0x2F, 0x68, 0x21, 0xF0, 0x3F, 0xDA, 0x7B,
+  0x94, 0x69, 0xAF, 0xFD, 0xCF, 0x53, 0xA3, 0xBD, 0xA7, 0x6A, 0xB2, 0xD0, 0x43, 0x45, 0xE5, 0x04, 0xC7, 0x84, 0xE5, 0xAA, 0xE6, 0x98, 0x9C, 0x07, 0xE3, 0x1C,
+  0x53, 0xCB, 0xDC, 0x03, 0xC7, 0xD4, 0x89, 0xE0, 0x75, 0xB8, 0xA6, 0xCE, 0xBC, 0x96, 0x70, 0xAE, 0xB2, 0xBC, 0x64, 0x9A, 0xE4, 0x96, 0x6A, 0xDA, 0x63, 0x6E,
+  0xAD, 0xC2, 0x26, 0xD1, 0xC5, 0x41, 0x7B, 0x98, 0xFF, 0xF6, 0xC7, 0xF7, 0xEF, 0xC8, 0x54, 0xEA, 0x59, 0x16, 0x73, 0x2C, 0xEB, 0x8E, 0x68, 0x20, 0x50, 0xDF,
+  0x99, 0x32, 0xDC, 0xA9, 0x3E, 0x74, 0xAF, 0x6D, 0xA0, 0x0F, 0x45, 0x32, 0xF5, 0xA0, 0x15, 0x82, 0x20, 0x0D, 0x6F, 0x3D, 0xDD, 0x25, 0x63, 0x1B, 0x29, 0x6F,
+  0x52, 0xAA, 0x44, 0x16, 0xA8, 0x40, 0x2D, 0x26, 0x0A, 0xC8, 0x39, 0x85, 0x51, 0xFA, 0x84, 0x8D, 0xAB, 0x08, 0xD7, 0xD7, 0xA0, 0xAE, 0x51, 0x8B, 0x6C, 0x7A,
+  0x62, 0xDB, 0x64, 0xD1, 0x12, 0xEA, 0x48, 0xCB, 0x5F, 0x8B, 0x40, 0x32, 0x86, 0xAD, 0x11, 0xF0, 0xA8, 0x27, 0xA8, 0x05, 0x26, 0x0A, 0x5D, 0x16, 0xC3, 0xB9,
+  0x6D, 0x02, 0xE7, 0x56, 0x03, 0x47, 0xF6, 0x3C, 0xB5, 0xC0, 0xC8, 0x40, 0x57, 0x21, 0x94, 0x7A, 0xC8, 0xC8, 0xE0, 0x92, 0xAE, 0x4D, 0xB2, 0xA7, 0xAB, 0xD7,
+  0x26, 0x19, 0x14, 0x29, 0x86, 0x53, 0x93, 0x36, 0x32, 0x12, 0xA1, 0x91, 0xE7, 0xAC, 0x37, 0x02, 0xCB, 0x22, 0x3E, 0xAB, 0xFB, 0x1F, 0x13, 0x13, 0xD6, 0x22,
+  0xF9, 0xD9, 0x8A, 0x96, 0x4C, 0xF9, 0xEA, 0x0C, 0x92, 0x70, 0xE6, 0x68, 0x7B, 0x03, 0x3C, 0x72, 0xC0, 0x0C, 0x61, 0x9F, 0x30, 0x8E, 0x67, 0x41, 0x9F, 0x3C,
+  0xDC, 0x98, 0x8C, 0xB9, 0x5B, 0x7D, 0x17, 0x08, 0x70, 0x80, 0xBB, 0xA7, 0xD2, 0x8D, 0x4D, 0xC4, 0x33, 0x07, 0x4B, 0x24, 0x17, 0x81, 0x13, 0x77, 0x0B, 0x20,
+  0xCA, 0x1E, 0x26, 0x5D, 0x82, 0x12, 0x8B, 0xA0, 0xF1, 0x51, 0x8C, 0x02, 0x0B, 0xAB, 0x98, 0xF3, 0xFD, 0x8C, 0xAC, 0x40, 0x3E, 0xFA, 0x89, 0x20, 0x50, 0x3C,
+  0x2A, 0x19, 0x9A, 0x8D, 0xE1, 0x08, 0x1A, 0xED, 0x68, 0xCA, 0xAE, 0x7D, 0x9A, 0xF3, 0xB8, 0x51, 0x42, 0x4E, 0xC2, 0x19, 0xCF, 0x05, 0x8E, 0xA9, 0x07, 0x1A,
+  0x8C, 0x30, 0xF8, 0x8E, 0x9F, 0x5B, 0x24, 0x80, 0xF1, 0x85, 0xD5, 0x31, 0x24, 0x91, 0x46, 0x03, 0xD7, 0x4C, 0x92, 0x98, 0xDB, 0xE9, 0xE1, 0x69, 0x04, 0xFA,
+  0x5A, 0x53, 0xFE, 0xBB, 0xAC, 0x48, 0xFE, 0x93, 0x2B, 0xBE, 0x93, 0x62, 0x3E, 0x43, 0xE0, 0xC5, 0x95, 0xFE, 0x7C, 0xDE, 0xBF, 0xD1, 0x0E, 0x25, 0x37, 0x28,
+  0x9B, 0xFB, 0xFB, 0xC6, 0x8B, 0x30, 0x34, 0xC1, 0x00, 0x9A, 0xA7, 0x9C, 0x11, 0x7D, 0x0C, 0x31, 0x65, 0x4C, 0x11, 0x58, 0x12, 0x4A, 0xB1, 0xA8, 0x18, 0x14,
+  0x21, 0xBD, 0xA5, 0xC7, 0x3C, 0x45, 0xEA, 0xCC, 0x41, 0xF5, 0xFF, 0xB5, 0x64, 0xFE, 0xED, 0x25, 0x27, 0x98, 0xE7, 0xBF, 0x70, 0x9C, 0x4E, 0x9B, 0x44, 0x53,
+  0x4E, 0x3B, 0x73, 0x1B, 0x8F, 0x4C, 0x00, 0x75, 0x81, 0x3A, 0xC0, 0xE3, 0x44, 0xE6, 0xA3, 0x58, 0x85, 0xE4, 0x3B, 0xC6, 0x5D, 0xE8, 0xAE, 0x39, 0x33, 0xB2,
+  0x83, 0x7E, 0xE4, 0xF0, 0xDC, 0x4F, 0xEC, 0x16, 0xA7, 0x18, 0x9C, 0x27, 0xB4, 0x61, 0x99, 0xC0, 0x82, 0xA4, 0x0E, 0xEB, 0x23, 0xE7, 0x2B, 0x39, 0x90, 0x3B,
+  0x3C, 0xD2, 0x64, 0x4A, 0x58, 0xC0, 0xA5, 0x93, 0x34, 0x31, 0xFF, 0x14, 0x8C, 0x68, 0x54, 0x96, 0xFD, 0xA7, 0x09, 0x81, 0x48, 0x04, 0x25, 0xF1, 0xA2, 0xCE,
+  0x2B, 0x53, 0x43, 0x26, 0x3C, 0x81, 0xE0, 0x44, 0x62, 0x19, 0x96, 0x0B, 0x04, 0x43, 0x58, 0xDA, 0x38, 0xC4, 0xB2, 0x10, 0xDD, 0x9C, 0x7B, 0x21, 0x74, 0x23,
+  0x65, 0x31, 0x6C, 0x17, 0x0F, 0xF7, 0x31, 0x1D, 0x5E, 0x6A, 0x03, 0xEA, 0xAF, 0xD1, 0xF1, 0x06, 0xFA, 0x9F, 0x8B, 0x41, 0xD4, 0x1B, 0x37, 0xE7, 0x24, 0x24,
+  0xB6, 0x07, 0x89, 0x94, 0xA8, 0x74, 0x48, 0x99, 0x05, 0x79, 0x3F, 0xAA, 0xE9, 0xD1, 0x23, 0x7E, 0x25, 0x53, 0x15, 0xEB, 0x71, 0x2E, 0xB2, 0x08, 0xCE, 0xA4,
+  0x19, 0x9C, 0x87, 0x9D, 0x81, 0x11, 0x01, 0x57, 0x20, 0x08, 0xDD, 0x8A, 0xD9, 0xBB, 0x80, 0xB7, 0x49, 0xB2, 0xF0, 0xFF, 0xAD, 0xFE, 0x67, 0x64, 0xF5, 0x1F,
+  0xCE, 0xC4, 0xD7, 0x8F, 0xC2, 0x89, 0x72, 0xFA, 0xB0, 0xE0, 0x1E, 0xE2, 0x85, 0xFA, 0xB8, 0x9F, 0x34, 0xDD, 0x89, 0x7C, 0x61, 0xDA, 0x40, 0x20, 0x9D, 0x48,
+  0x16, 0xD1, 0x88, 0xC2, 0xF7, 0x14, 0xE0, 0xA6, 0x68, 0x77, 0xA7, 0x2D, 0xE6, 0x16, 0xB8, 0x3D, 0x26, 0x14, 0xA5, 0x4B, 0x32, 0xC3, 0x9C, 0x6D, 0x49, 0x49,
+  0x1F, 0x56, 0xE7, 0x8A, 0x65, 0x0A, 0xC7, 0xA5, 0xE5, 0xB3, 0xDA, 0x2B, 0xAB, 0x8E, 0x9E, 0xE9, 0x2E, 0x3B, 0x03, 0x64, 0x88, 0x9F, 0xF2, 0x7E, 0x8E, 0xC7,
+  0xC4, 0x71, 0xAD, 0x51, 0xC0, 0x32, 0xFE, 0x98, 0xE6, 0x3A, 0x68, 0x95, 0x02, 0xE6, 0x6E, 0x5E, 0x1A, 0xB2, 0x30, 0xA5, 0x0D, 0x8C, 0xAC, 0x9A, 0x8C, 0x12,
+  0xE9, 0xBF, 0xE7, 0x86, 0xBB, 0x74, 0x1C, 0xC8, 0x20, 0x35, 0x01, 0x32, 0xA8, 0xDE, 0xD5, 0x9A, 0xE8, 0xFF, 0x5C, 0x7B, 0x16, 0x63, 0x9E, 0xA2, 0xC0, 0xCE,
+  0x4E, 0x1A, 0x1A, 0x4D, 0x32, 0x08, 0x37, 0x3E, 0xAE, 0x4D, 0xE4, 0xC7, 0xCC, 0x0A, 0x66, 0x6E, 0x92, 0x7E, 0x56, 0xA2, 0x84, 0xCE, 0xFA, 0x51, 0x8A, 0xF0,
+  0x8A, 0x8F, 0x03, 0x44, 0xF0, 0x5C, 0x33, 0x22, 0x10, 0x3F, 0xA9, 0x2F, 0x17, 0x8D, 0x7D, 0xCE, 0xA5, 0xBE, 0xC3, 0xE4, 0x19, 0x5E, 0xBB, 0xA0, 0x3F, 0x09,
+  0x73, 0x92, 0x90, 0x0E, 0x11, 0x64, 0x20, 0xE2, 0x28, 0x26, 0x05, 0x22, 0x35, 0x2C, 0x83, 0x37, 0xB7, 0x50, 0x04, 0x8F, 0x4E, 0xB3, 0x91, 0x27, 0xEA, 0xA8,
+  0x4F, 0x30, 0xE4, 0x95, 0x03, 0x0C, 0x9D, 0xB8, 0xA3, 0x74, 0xED, 0x79, 0xDF, 0x80, 0x67, 0x2C, 0x00, 0xC2, 0x2B, 0xC8, 0x03, 0x29, 0xC5, 0x3C, 0x3A, 0xCE,
+  0x54, 0x43, 0x10, 0x0E, 0xEE, 0x7A, 0x44, 0xA4, 0xE0, 0xB5, 0xE2, 0xB2, 0x10, 0x94, 0x91, 0xD9, 0xCB, 0x98, 0x03, 0x37, 0xC4, 0xA3, 0xD7, 0x23, 0x98, 0xC8,
+  0xFA, 0x86, 0xE6, 0xEE, 0x63, 0xC8, 0x71, 0x42, 0xDA, 0xA9, 0xCC, 0x05, 0x95, 0x55, 0xEE, 0x8B, 0xAE, 0x2F, 0xE9, 0xF7, 0x12, 0xF1, 0xBA, 0xA7, 0x9E, 0xE0,
+  0x90, 0xBA, 0x01, 0xAD, 0xBD, 0x5E, 0xB3, 0x13, 0x28, 0x81, 0x29, 0x26, 0x5B, 0xB3, 0x40, 0x97, 0xA3, 0xB9, 0x9D, 0x8C, 0x28, 0x12, 0x80, 0x6D, 0x4C, 0xFA,
+  0x35, 0xE8, 0x4F, 0x54, 0xDD, 0x13, 0xF6, 0x8B, 0xBB, 0xDA, 0x00, 0x94, 0x0A, 0x92, 0xF3, 0x63, 0xF3, 0x3D, 0xE7, 0x39, 0xE6, 0x1B, 0x29, 0xF4, 0x4D, 0x0C,
+  0xCE, 0x4C, 0xC9, 0x08, 0x10, 0x62, 0x2E, 0x91, 0x83, 0x48, 0xCF, 0x26, 0x46, 0x33, 0x78, 0x69, 0xCF, 0x5C, 0x9D, 0xC2, 0xFA, 0xD5, 0x67, 0x28, 0x07, 0x04,
+  0xB0, 0x96, 0xF7, 0xAB, 0x3F, 0x38, 0x88, 0x3B, 0x63, 0x02, 0xDD, 0x0F, 0x66, 0xCC, 0xE2, 0x13, 0x05, 0x98, 0x2A, 0x3C, 0xC5, 0xAD, 0xCC, 0xEC, 0xE1, 0xDD,
+  0xAF, 0xB1, 0x84, 0xC4, 0x5D, 0x47, 0xE5, 0xE0, 0x81, 0x4F, 0x32, 0x97, 0x8F, 0x1B, 0x84, 0xBB, 0xAD, 0x09, 0x15, 0xC5, 0x1A, 0x87, 0x1C, 0xE2, 0xD1, 0xE4,
+  0xDF, 0xC2, 0x1B, 0xC9, 0x88, 0x29, 0x3C, 0x6F, 0x3E, 0xEC, 0x01, 0x07, 0xAC, 0xC8, 0x80, 0x09, 0x1E, 0xD1, 0xE0, 0x46, 0x90, 0x29, 0x45, 0x61, 0xD1, 0x18,
+  0xD9, 0x96, 0xEA, 0x19, 0x58, 0xD9, 0xAB, 0xC7, 0xB4, 0xF8, 0x2D, 0xC0, 0x60, 0x45, 0x14, 0x96, 0x53, 0x92, 0x59, 0x18, 0x54, 0x81, 0x02, 0x20, 0x45, 0xA2,
+  0x22, 0x32, 0xA5, 0x77, 0x16, 0x4B, 0x7A, 0x95, 0x8E, 0xB5, 0x22, 0x6B, 0x1C, 0x0D, 0x49, 0x04, 0xE3, 0xD8, 0x3F, 0xB8, 0xC8, 0xFC, 0x53, 0xC6, 0x45, 0x14,
+  0x3B, 0x14, 0x5D, 0xD6, 0x42, 0x27, 0x37, 0xE4, 0xAB, 0x40, 0xE5, 0x1E, 0x9D, 0x5F, 0x65, 0xEC, 0xC7, 0xE1, 0xC1, 0xC5, 0xCC, 0x0D, 0xFA, 0x54, 0x0F, 0x4D,
+  0x3F, 0xC2, 0x4B, 0x8F, 0xC1, 0x14, 0xF2, 0x68, 0xBD, 0xB3, 0x42, 0x72, 0x09, 0xE9, 0x12, 0xEA, 0x7A, 0x65, 0x33, 0xF2, 0xAE, 0x4A, 0x02, 0x95, 0xB4, 0x3A,
+  0x80, 0xD3, 0x2B, 0x29, 0x40, 0xAB, 0x10, 0xC4, 0x6A, 0x90, 0xCA, 0x92, 0xC9, 0xCA, 0x11, 0x05, 0x06, 0x5F, 0x16, 0x52, 0x6F, 0xB6, 0x82, 0x67, 0x4D, 0x15,
+  0x25, 0xA8, 0xD5, 0x65, 0x53, 0x9B, 0xB9, 0x95, 0xF2, 0x5C, 0x73, 0xAB, 0x8B, 0xAB, 0xAB, 0x48, 0xD4, 0xDA, 0xB1, 0x28, 0xA5, 0x46, 0x08, 0x39, 0x5E, 0xFA,
+  0xA2, 0x14, 0x8D, 0xFA, 0xA3, 0xB2, 0x82, 0xF1, 0xE9, 0x03, 0x28, 0xA7, 0xB4, 0xD8, 0x5B, 0x88, 0x5D, 0xE8, 0x19, 0x43, 0x82, 0xE5, 0xE0, 0x88, 0x3E, 0xC2,
+  0x8C, 0x79, 0x8B, 0x8E, 0x74, 0x5A, 0x54, 0xEA, 0xA4, 0xA7, 0x18, 0xD4, 0xDD, 0xEC, 0x64, 0xE1, 0xD5, 0x98, 0x1F, 0xDD, 0xD2, 0xD6, 0x40, 0xBC, 0xEE, 0x63,
+  0x41, 0x8C, 0x30, 0xE7, 0xF1, 0x42, 0x11, 0xB2, 0x36, 0x74, 0xF9, 0xAB, 0xA8, 0x93, 0xBA, 0xDF, 0x94, 0x54, 0x08, 0x29, 0x2B, 0xC3, 0xC5, 0x5B, 0x64, 0x51,
+  0x49, 0x42, 0x3C, 0x42, 0x43, 0x03, 0xB2, 0xE3, 0xF2, 0x24, 0x00, 0x0A, 0xC1, 0x27, 0x12, 0x53, 0x60, 0x56, 0x13, 0x32, 0x49, 0x3B, 0x96, 0x46, 0x5E, 0xE9,
+  0x8B, 0xC4, 0x2A, 0xA3, 0xE7, 0x1F, 0xC7, 0x23, 0x74, 0x3F, 0xAF, 0xA1, 0x3E, 0xD0, 0xD7, 0xEB, 0xCE, 0x2E, 0xFA, 0xA0, 0xE2, 0xE6, 0x08, 0x72, 0x25, 0xB2,
+  0x53, 0x17, 0x09, 0x6E, 0xE8, 0xF5, 0xD0, 0x52, 0xF4, 0xD1, 0x83, 0x53, 0x45, 0xFE, 0x82, 0x8F, 0x38, 0xC8, 0x6D, 0x2E, 0x22, 0x2C, 0x39, 0xEA, 0x19, 0xD2,
+  0x0A, 0xBF, 0x31, 0x05, 0x20, 0x31, 0xE1, 0x39, 0x64, 0x33, 0xAE, 0xA1, 0x22, 0x17, 0x51, 0x86, 0x18, 0xF7, 0x58, 0x0F, 0x0A, 0x30, 0xA7, 0x85, 0x45, 0x63,
+  0xD3, 0xBD, 0x32, 0x03, 0x55, 0xDE, 0xC7, 0x80, 0x15, 0x32, 0x29, 0xF2, 0x1D, 0xAC, 0xF7, 0xA2, 0x0C, 0x2D, 0x29, 0xBB, 0xE2, 0x5F, 0x9F, 0xEF, 0xC4, 0x20,
+  0xD7, 0x9E, 0xD8, 0xC7, 0xFF, 0xA4, 0x6E, 0x8B, 0x07, 0xBF, 0x46, 0xF7, 0xC5, 0x3F, 0x91, 0x21, 0xAE, 0x85, 0x1E, 0xB5, 0xDA, 0x37, 0x17, 0x0B, 0xCC, 0xB0,
+  0xBF, 0x9A, 0xD9, 0x8E, 0xD5, 0x11, 0x45, 0xE3, 0xB5, 0x27, 0xC0, 0x8C, 0x56, 0x51, 0xF1, 0x75, 0x0E, 0x12, 0x2A, 0x14, 0x91, 0xAF, 0xAC, 0xC2, 0xEA, 0xA0,
+  0xF6, 0x00, 0x43, 0x35, 0x59, 0xA5, 0x48, 0xEA, 0x5B, 0x38, 0x04, 0xED, 0x1B, 0x5A, 0x06, 0xC7, 0x39, 0xD9, 0x3D, 0xE8, 0x1E, 0xC8, 0x0C, 0x21, 0x3C, 0x9D,
+  0x88, 0x5A, 0x04, 0x97, 0x96, 0x0B, 0xFD, 0xF4, 0x03, 0xC9, 0xB8, 0x84, 0x1B, 0x7A, 0x90, 0x2F, 0x4A, 0xEA, 0xB4, 0xF9, 0x3A, 0xBA, 0xFD, 0xDF, 0x16, 0x34,
+  0xFB, 0x1A, 0xD9, 0x78, 0x85, 0x8C, 0xB4, 0x44, 0x8E, 0x48, 0x25, 0xB2, 0x47, 0x19, 0x38, 0x50, 0x24, 0xBB, 0x30, 0xD2, 0x24, 0xA9, 0x91, 0x9E, 0xA7, 0x8A,
+  0x46, 0x0B, 0xE8, 0xA8, 0x38, 0xB5, 0xE4, 0x6B, 0x8C, 0xF8, 0xFE, 0xCE, 0x4C, 0x1F, 0xFC, 0xD8, 0x33, 0x3A, 0xD8, 0x56, 0xB0, 0xD7, 0xE1, 0xE9, 0xEF, 0xD1,
+  0x9C, 0x59, 0x67, 0x77, 0xEF, 0x70, 0x77, 0x97, 0x1E, 0xAC, 0x3E, 0x66, 0x9D, 0xDE, 0x20, 0xCA, 0x82, 0x1F, 0x9E, 0x47, 0x54, 0x52, 0x7C, 0xFF, 0xAD, 0x87,
+  0x67, 0x08, 0x97, 0x65, 0x78, 0x6F, 0xBB, 0xD4, 0x0D, 0x96, 0x65, 0xB9, 0x64, 0x20, 0xAC, 0x95, 0xCB, 0xD2, 0xE2, 0xEB, 0xFE, 0xA2, 0xC1, 0x17, 0x5F, 0x0E,
+  0x05, 0x7F, 0x5B, 0xF1, 0xB4, 0xA5, 0xB3, 0x87, 0x35, 0x50, 0x9E, 0x8F, 0x1B, 0x6A, 0x28, 0x43, 0x92, 0x3B, 0x71, 0xA7, 0xE4, 0xF0, 0x3B, 0xC7, 0xFF, 0x8C,
+  0xAD, 0x91, 0x0E, 0x4A, 0x2E, 0xAC, 0x5C, 0xC7, 0x07, 0xD4, 0x3A, 0x37, 0xA5, 0xCE, 0x60, 0x3A, 0xF6, 0x9A, 0x1D, 0x76, 0xA6, 0x1D, 0xBF, 0x57, 0x4B, 0xA8,
+  0xE7, 0x3C, 0x32, 0x86, 0x22, 0x8D, 0xC6, 0x60, 0xB1, 0xD5, 0xC6, 0x98, 0xAC, 0xAC, 0x2B, 0xC1, 0x6D, 0xA5, 0xF3, 0x91, 0x03, 0xB8, 0x8A, 0x02, 0xCA, 0x71,
+  0xBB, 0x4A, 0x59, 0x65, 0x60, 0x58, 0xDA, 0x59, 0x67, 0x0F, 0x88, 0xE5, 0x20, 0x00, 0x35, 0xDF, 0x72, 0x35, 0x6E, 0x21, 0xDB, 0x8F, 0x7C, 0x82, 0x00, 0x64,
+  0xAF, 0xA8, 0x90, 0x1C, 0x33, 0x29, 0xD6, 0xAA, 0x60, 0xA4, 0x9B, 0x1F, 0xE5, 0x66, 0xCC, 0x58, 0xD1, 0xE8, 0x36, 0x3F, 0xB2, 0x8D, 0xCD, 0x1B, 0x68, 0x1D,
+  0x1D, 0xBC, 0x9D, 0x90, 0x90, 0x95, 0xD3, 0x9B, 0xA9, 0xF4, 0x8E, 0x46, 0xF8, 0x15, 0x25, 0xD4, 0xF3, 0xC1, 0x05, 0xB9, 0x58, 0x4D, 0x72, 0x31, 0x49, 0x2E,
+  0x2A, 0x90, 0x0C, 0x2F, 0xAB, 0xC3, 0x0D, 0xB1, 0xFC, 0xFF, 0xF2, 0x32, 0x69, 0xD9, 0xF5, 0xA8, 0x14, 0x4F, 0x39, 0x9C, 0x57, 0x9A, 0x57, 0x5E, 0x20, 0xF5,
+  0x10, 0x11, 0xD1, 0xAC, 0xEB, 0x51, 0xBD, 0x66, 0x45, 0xE1, 0x00, 0x2A, 0x90, 0x34, 0x4B, 0x1F, 0x34, 0x88, 0x9A, 0xF2, 0x9A, 0x85, 0x72, 0x07, 0x9B, 0xE9,
+  0x5A, 0x46, 0xFC, 0xD8, 0xDB, 0x18, 0xD9, 0x38, 0xA5, 0x0C, 0xE7, 0x38, 0x93, 0xF0, 0xBC, 0xE2, 0xBF, 0xB5, 0xD0, 0x8E, 0x73, 0x27, 0x22, 0x9C, 0x00, 0x88,
+  0x42, 0x15, 0x98, 0x5B, 0x48, 0x07, 0x9C, 0x84, 0x0F, 0x6F, 0x71, 0xEC, 0x33, 0x9E, 0xBA, 0x9A, 0x01, 0x87, 0x56, 0x7A, 0x53, 0x17, 0x90, 0x52, 0x79, 0x84,
+  0xA8, 0x0A, 0x6B, 0x11, 0xAF, 0x29, 0x96, 0x2B, 0x88, 0xC5, 0x3F, 0xF1, 0xC0, 0x71, 0x1C, 0x4C, 0x11, 0xCE, 0x9D, 0xE1, 0x17, 0xFF, 0x06, 0x6E, 0xDA, 0x6F,
+  0xC1, 0x5F, 0xA4, 0x00, 0x00
 };
 
 //File: index_ov3660.html.gz, Size: 8636
diff --git a/libraries/ESP32/examples/RMT/RMTReadXJT/RMTReadXJT.ino b/libraries/ESP32/examples/RMT/RMTReadXJT/RMTReadXJT.ino
index d9e86ce8399..762225bcdf5 100644
--- a/libraries/ESP32/examples/RMT/RMTReadXJT/RMTReadXJT.ino
+++ b/libraries/ESP32/examples/RMT/RMTReadXJT/RMTReadXJT.ino
@@ -13,7 +13,7 @@
 // limitations under the License.
 
 /**
- * @brief This example demonstrates usage of RMT for receiving XJT D12 data
+ * @brief This example demonstrates usage of RMT for receiving XJT D16 data
  *
  * The output is the RMT data read and processed
  *
@@ -21,7 +21,7 @@
 
 //
 // Note: This example uses a FrSKY device communication
-//          using XJT D12 protocol
+//          using XJT D16 protocol
 //
 // ; 0 bit = 6us low/10us high
 // ; 1 bit = 14us low/10us high
diff --git a/libraries/ESP32/library.properties b/libraries/ESP32/library.properties
index d8c88776595..7ebc69be71f 100644
--- a/libraries/ESP32/library.properties
+++ b/libraries/ESP32/library.properties
@@ -1,5 +1,5 @@
 name=ESP32
-version=3.1.3
+version=3.2.0
 author=Hristo Gochkov, Ivan Grokhtkov
 maintainer=Hristo Gochkov <hristo@espressif.com>
 sentence=ESP32 sketches examples
diff --git a/libraries/ESP_I2S/library.properties b/libraries/ESP_I2S/library.properties
index 44493d67ff2..263e9823275 100644
--- a/libraries/ESP_I2S/library.properties
+++ b/libraries/ESP_I2S/library.properties
@@ -1,5 +1,5 @@
 name=ESP_I2S
-version=3.1.3
+version=3.2.0
 author=me-no-dev
 maintainer=me-no-dev
 sentence=Library for ESP I2S communication
diff --git a/libraries/ESP_NOW/library.properties b/libraries/ESP_NOW/library.properties
index 79c97131fb3..f3e5c109a9b 100644
--- a/libraries/ESP_NOW/library.properties
+++ b/libraries/ESP_NOW/library.properties
@@ -1,5 +1,5 @@
 name=ESP_NOW
-version=3.1.3
+version=3.2.0
 author=me-no-dev
 maintainer=P-R-O-C-H-Y
 sentence=Library for ESP_NOW
diff --git a/libraries/ESP_SR/library.properties b/libraries/ESP_SR/library.properties
index 6a59c25102f..295761bd9fb 100644
--- a/libraries/ESP_SR/library.properties
+++ b/libraries/ESP_SR/library.properties
@@ -1,5 +1,5 @@
 name=ESP_SR
-version=3.1.3
+version=3.2.0
 author=me-no-dev
 maintainer=me-no-dev
 sentence=Library for ESP Sound Recognition
diff --git a/libraries/ESPmDNS/library.properties b/libraries/ESPmDNS/library.properties
index 925bb4fb258..6d36d61b783 100644
--- a/libraries/ESPmDNS/library.properties
+++ b/libraries/ESPmDNS/library.properties
@@ -1,5 +1,5 @@
 name=ESPmDNS
-version=3.1.3
+version=3.2.0
 author=Hristo Gochkov, Ivan Grokhtkov
 maintainer=Hristo Gochkov <hristo@espressif.com>
 sentence=ESP32 mDNS Library
diff --git a/libraries/Ethernet/library.properties b/libraries/Ethernet/library.properties
index da3bbbb2211..d34ae036417 100644
--- a/libraries/Ethernet/library.properties
+++ b/libraries/Ethernet/library.properties
@@ -1,5 +1,5 @@
 name=Ethernet
-version=3.1.3
+version=3.2.0
 author=Hristo Gochkov
 maintainer=Hristo Gochkov <hristo@espressif.com>
 sentence=Enables network connection (local and Internet) using the ESP32 Ethernet.
diff --git a/libraries/Ethernet/src/ETH.cpp b/libraries/Ethernet/src/ETH.cpp
index fa8a2b97122..3dfba37c684 100644
--- a/libraries/Ethernet/src/ETH.cpp
+++ b/libraries/Ethernet/src/ETH.cpp
@@ -124,7 +124,8 @@ void ETHClass::_onEthEvent(int32_t event_id, void *event_data) {
 }
 
 ETHClass::ETHClass(uint8_t eth_index)
-  : _eth_handle(NULL), _eth_index(eth_index), _phy_type(ETH_PHY_MAX), _glue_handle(NULL), _mac(NULL), _phy(NULL)
+  : _eth_handle(NULL), _eth_index(eth_index), _phy_type(ETH_PHY_MAX), _glue_handle(NULL), _mac(NULL), _phy(NULL), _eth_started(false), _link_speed(100),
+    _full_duplex(true), _auto_negotiation(true)
 #if ETH_SPI_SUPPORTS_CUSTOM
     ,
     _spi(NULL)
@@ -136,7 +137,7 @@ ETHClass::ETHClass(uint8_t eth_index)
     _pin_mcd(-1), _pin_mdio(-1), _pin_power(-1), _pin_rmii_clock(-1)
 #endif /* CONFIG_ETH_USE_ESP32_EMAC */
     ,
-    _task_stack_size(4096) {
+    _task_stack_size(4096), _eth_connected_event_handle(0) {
 }
 
 ETHClass::~ETHClass() {}
@@ -271,8 +272,8 @@ bool ETHClass::begin(eth_phy_type_t type, int32_t phy_addr, int mdc, int mdio, i
   eth_mac_config.sw_reset_timeout_ms = 1000;
   eth_mac_config.rx_task_stack_size = _task_stack_size;
 
-  esp_eth_mac_t *mac = esp_eth_mac_new_esp32(&mac_config, &eth_mac_config);
-  if (mac == NULL) {
+  _mac = esp_eth_mac_new_esp32(&mac_config, &eth_mac_config);
+  if (_mac == NULL) {
     log_e("esp_eth_mac_new_esp32 failed");
     return false;
   }
@@ -281,23 +282,25 @@ bool ETHClass::begin(eth_phy_type_t type, int32_t phy_addr, int mdc, int mdio, i
   phy_config.phy_addr = phy_addr;
   phy_config.reset_gpio_num = _pin_power;
 
-  esp_eth_phy_t *phy = NULL;
   switch (type) {
-    case ETH_PHY_LAN8720: phy = esp_eth_phy_new_lan87xx(&phy_config); break;
-    case ETH_PHY_TLK110:  phy = esp_eth_phy_new_ip101(&phy_config); break;
-    case ETH_PHY_RTL8201: phy = esp_eth_phy_new_rtl8201(&phy_config); break;
-    case ETH_PHY_DP83848: phy = esp_eth_phy_new_dp83848(&phy_config); break;
-    case ETH_PHY_KSZ8041: phy = esp_eth_phy_new_ksz80xx(&phy_config); break;
-    case ETH_PHY_KSZ8081: phy = esp_eth_phy_new_ksz80xx(&phy_config); break;
+#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 4, 0)
+    case ETH_PHY_GENERIC: _phy = esp_eth_phy_new_generic(&phy_config); break;
+#endif
+    case ETH_PHY_LAN8720: _phy = esp_eth_phy_new_lan87xx(&phy_config); break;
+    case ETH_PHY_TLK110:  _phy = esp_eth_phy_new_ip101(&phy_config); break;
+    case ETH_PHY_RTL8201: _phy = esp_eth_phy_new_rtl8201(&phy_config); break;
+    case ETH_PHY_DP83848: _phy = esp_eth_phy_new_dp83848(&phy_config); break;
+    case ETH_PHY_KSZ8041: _phy = esp_eth_phy_new_ksz80xx(&phy_config); break;
+    case ETH_PHY_KSZ8081: _phy = esp_eth_phy_new_ksz80xx(&phy_config); break;
     default:              log_e("Unsupported PHY %d", type); break;
   }
-  if (phy == NULL) {
+  if (_phy == NULL) {
     log_e("esp_eth_phy_new failed");
     return false;
   }
 
   _eth_handle = NULL;
-  esp_eth_config_t eth_config = ETH_DEFAULT_CONFIG(mac, phy);
+  esp_eth_config_t eth_config = ETH_DEFAULT_CONFIG(_mac, _phy);
   ret = esp_eth_driver_install(&eth_config, &_eth_handle);
   if (ret != ESP_OK) {
     log_e("Ethernet driver install failed: %d", ret);
@@ -349,6 +352,19 @@ bool ETHClass::begin(eth_phy_type_t type, int32_t phy_addr, int mdc, int mdio, i
     return false;
   }
 
+  // auto negotiation needs to be disabled to change duplex mode and link speed
+  if (!_auto_negotiation) {
+    if (!_setAutoNegotiation(_auto_negotiation)) {
+      return false;
+    }
+    if (!_setFullDuplex(_full_duplex)) {
+      return false;
+    }
+    if (!_setLinkSpeed(_link_speed)) {
+      return false;
+    }
+  }
+
   if (_eth_ev_instance == NULL && esp_event_handler_instance_register(ETH_EVENT, ESP_EVENT_ANY_ID, &_eth_event_cb, NULL, &_eth_ev_instance)) {
     log_e("event_handler_instance_register for ETH_EVENT Failed!");
     return false;
@@ -357,7 +373,7 @@ bool ETHClass::begin(eth_phy_type_t type, int32_t phy_addr, int mdc, int mdio, i
   /* attach to receive events */
   initNetif((Network_Interface_ID)(ESP_NETIF_ID_ETH + _eth_index));
 
-  Network.onSysEvent(onEthConnected, ARDUINO_EVENT_ETH_CONNECTED);
+  _eth_connected_event_handle = Network.onSysEvent(onEthConnected, ARDUINO_EVENT_ETH_CONNECTED);
 
   ret = esp_eth_start(_eth_handle);
   if (ret != ESP_OK) {
@@ -365,6 +381,8 @@ bool ETHClass::begin(eth_phy_type_t type, int32_t phy_addr, int mdc, int mdio, i
     return false;
   }
 
+  _eth_started = true;
+
   if (!perimanSetPinBus(_pin_rmii_clock, ESP32_BUS_TYPE_ETHERNET_CLK, (void *)(this), -1, -1)) {
     goto err;
   }
@@ -786,6 +804,19 @@ bool ETHClass::beginSPI(
     return false;
   }
 
+  // auto negotiation needs to be disabled to change duplex mode and link speed
+  if (!_auto_negotiation) {
+    if (!_setAutoNegotiation(_auto_negotiation)) {
+      return false;
+    }
+    if (!_setFullDuplex(_full_duplex)) {
+      return false;
+    }
+    if (!_setLinkSpeed(_link_speed)) {
+      return false;
+    }
+  }
+
   if (_eth_ev_instance == NULL && esp_event_handler_instance_register(ETH_EVENT, ESP_EVENT_ANY_ID, &_eth_event_cb, NULL, &_eth_ev_instance)) {
     log_e("event_handler_instance_register for ETH_EVENT Failed!");
     return false;
@@ -801,6 +832,8 @@ bool ETHClass::beginSPI(
     return false;
   }
 
+  _eth_started = true;
+
   // If Arduino's SPI is used, cs pin is in GPIO mode
 #if ETH_SPI_SUPPORTS_CUSTOM
   if (_spi == NULL) {
@@ -847,7 +880,7 @@ bool ETHClass::beginSPI(
     perimanSetPinBusExtraType(_pin_rst, "ETH_RST");
   }
 
-  Network.onSysEvent(onEthConnected, ARDUINO_EVENT_ETH_CONNECTED);
+  _eth_connected_event_handle = Network.onSysEvent(onEthConnected, ARDUINO_EVENT_ETH_CONNECTED);
 
   return true;
 
@@ -883,7 +916,8 @@ static bool empty_ethDetachBus(void *bus_pointer) {
 
 void ETHClass::end(void) {
 
-  Network.removeEvent(onEthConnected, ARDUINO_EVENT_ETH_CONNECTED);
+  Network.removeEvent(_eth_connected_event_handle);
+  _eth_connected_event_handle = 0;
 
   if (_eth_handle != NULL) {
     if (esp_eth_stop(_eth_handle) != ESP_OK) {
@@ -894,6 +928,9 @@ void ETHClass::end(void) {
     while (getStatusBits() & ESP_NETIF_STARTED_BIT) {
       delay(10);
     }
+
+    _eth_started = false;
+
     //delete glue first
     if (_glue_handle != NULL) {
       if (esp_eth_del_netif_glue(_glue_handle) != ESP_OK) {
@@ -1007,6 +1044,30 @@ bool ETHClass::fullDuplex() const {
   return (link_duplex == ETH_DUPLEX_FULL);
 }
 
+bool ETHClass::_setFullDuplex(bool on) {
+  if (_eth_handle == NULL) {
+    return false;
+  }
+  eth_duplex_t link_duplex = on ? ETH_DUPLEX_FULL : ETH_DUPLEX_HALF;
+  esp_err_t err = esp_eth_ioctl(_eth_handle, ETH_CMD_S_DUPLEX_MODE, &link_duplex);
+  if (err != ESP_OK) {
+    log_e("Failed to set duplex mode: 0x%x: %s", err, esp_err_to_name(err));
+  }
+  return err == ESP_OK;
+}
+
+bool ETHClass::setFullDuplex(bool on) {
+  if (_eth_started) {
+    log_e("This method must be called before ETH.begin()");
+    return false;
+  }
+  if (_auto_negotiation) {
+    log_w("Auto Negotiation MUST be OFF for this setting to be applied");
+  }
+  _full_duplex = on;
+  return true;
+}
+
 bool ETHClass::autoNegotiation() const {
   if (_eth_handle == NULL) {
     return false;
@@ -1016,6 +1077,26 @@ bool ETHClass::autoNegotiation() const {
   return auto_nego;
 }
 
+bool ETHClass::_setAutoNegotiation(bool on) {
+  if (_eth_handle == NULL) {
+    return false;
+  }
+  esp_err_t err = esp_eth_ioctl(_eth_handle, ETH_CMD_S_AUTONEGO, &on);
+  if (err != ESP_OK) {
+    log_e("Failed to set auto negotiation: 0x%x: %s", err, esp_err_to_name(err));
+  }
+  return err == ESP_OK;
+}
+
+bool ETHClass::setAutoNegotiation(bool on) {
+  if (_eth_started) {
+    log_e("This method must be called before ETH.begin()");
+    return false;
+  }
+  _auto_negotiation = on;
+  return true;
+}
+
 uint32_t ETHClass::phyAddr() const {
   if (_eth_handle == NULL) {
     return 0;
@@ -1025,7 +1106,7 @@ uint32_t ETHClass::phyAddr() const {
   return phy_addr;
 }
 
-uint8_t ETHClass::linkSpeed() const {
+uint16_t ETHClass::linkSpeed() const {
   if (_eth_handle == NULL) {
     return 0;
   }
@@ -1034,6 +1115,34 @@ uint8_t ETHClass::linkSpeed() const {
   return (link_speed == ETH_SPEED_10M) ? 10 : 100;
 }
 
+bool ETHClass::_setLinkSpeed(uint16_t speed) {
+  if (_eth_handle == NULL) {
+    return false;
+  }
+  eth_speed_t link_speed = (speed == 10) ? ETH_SPEED_10M : ETH_SPEED_100M;
+  esp_err_t err = esp_eth_ioctl(_eth_handle, ETH_CMD_S_SPEED, &link_speed);
+  if (err != ESP_OK) {
+    log_e("Failed to set link speed: 0x%x: %s", err, esp_err_to_name(err));
+  }
+  return err == ESP_OK;
+}
+
+bool ETHClass::setLinkSpeed(uint16_t speed) {
+  if (speed != 10 && speed != 100) {
+    log_e("Ethernet currently supports only 10 or 100 Mbps link speed");
+    return false;
+  }
+  if (_eth_started) {
+    log_e("This method must be called before ETH.begin()");
+    return false;
+  }
+  if (_auto_negotiation) {
+    log_w("Auto Negotiation MUST be OFF for this setting to be applied");
+  }
+  _link_speed = speed;
+  return true;
+}
+
 // void ETHClass::getMac(uint8_t* mac)
 // {
 //     if(_eth_handle != NULL && mac != NULL){
diff --git a/libraries/Ethernet/src/ETH.h b/libraries/Ethernet/src/ETH.h
index 582835cf8ac..c52aac6ec6f 100644
--- a/libraries/Ethernet/src/ETH.h
+++ b/libraries/Ethernet/src/ETH.h
@@ -23,6 +23,7 @@
 
 #ifndef _ETH_H_
 #define _ETH_H_
+#include "esp_idf_version.h"
 
 //
 // Example configurations for pins_arduino.h to allow starting with ETH.begin();
@@ -127,6 +128,10 @@ typedef emac_rmii_clock_mode_t eth_clock_mode_t;
 
 typedef enum {
 #if CONFIG_ETH_USE_ESP32_EMAC
+#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 4, 0)
+  ETH_PHY_GENERIC,
+#define ETH_PHY_JL1101 ETH_PHY_GENERIC
+#endif
   ETH_PHY_LAN8720,
   ETH_PHY_TLK110,
   ETH_PHY_RTL8201,
@@ -187,8 +192,14 @@ class ETHClass : public NetworkInterface {
 
   // ETH Handle APIs
   bool fullDuplex() const;
-  uint8_t linkSpeed() const;
+  bool setFullDuplex(bool on);
+
+  uint16_t linkSpeed() const;
+  bool setLinkSpeed(uint16_t speed);  //10 or 100
+
   bool autoNegotiation() const;
+  bool setAutoNegotiation(bool on);
+
   uint32_t phyAddr() const;
 
   esp_eth_handle_t handle() const;
@@ -218,6 +229,10 @@ class ETHClass : public NetworkInterface {
   esp_eth_netif_glue_handle_t _glue_handle;
   esp_eth_mac_t *_mac;
   esp_eth_phy_t *_phy;
+  bool _eth_started;
+  uint16_t _link_speed;
+  bool _full_duplex;
+  bool _auto_negotiation;
 #if ETH_SPI_SUPPORTS_CUSTOM
   SPIClass *_spi;
   char _cs_str[10];
@@ -236,6 +251,7 @@ class ETHClass : public NetworkInterface {
   int8_t _pin_rmii_clock;
 #endif /* CONFIG_ETH_USE_ESP32_EMAC */
   size_t _task_stack_size;
+  network_event_handle_t _eth_connected_event_handle;
 
   static bool ethDetachBus(void *bus_pointer);
   bool beginSPI(
@@ -245,6 +261,9 @@ class ETHClass : public NetworkInterface {
 #endif
     int sck, int miso, int mosi, spi_host_device_t spi_host, uint8_t spi_freq_mhz
   );
+  bool _setFullDuplex(bool on);
+  bool _setLinkSpeed(uint16_t speed);
+  bool _setAutoNegotiation(bool on);
 
   friend class EthernetClass;  // to access beginSPI
 };
diff --git a/libraries/FFat/library.properties b/libraries/FFat/library.properties
index 574e184ba02..35940fd5472 100644
--- a/libraries/FFat/library.properties
+++ b/libraries/FFat/library.properties
@@ -1,5 +1,5 @@
 name=FFat
-version=3.1.3
+version=3.2.0
 author=Hristo Gochkov, Ivan Grokhtkov, Larry Bernstone
 maintainer=Hristo Gochkov <hristo@espressif.com>
 sentence=ESP32 FAT on Flash File System
diff --git a/libraries/FS/library.properties b/libraries/FS/library.properties
index 91fb4396ed4..07bd296bb83 100644
--- a/libraries/FS/library.properties
+++ b/libraries/FS/library.properties
@@ -1,5 +1,5 @@
 name=FS
-version=3.1.3
+version=3.2.0
 author=Hristo Gochkov, Ivan Grokhtkov
 maintainer=Hristo Gochkov <hristo@espressif.com>
 sentence=ESP32 File System
diff --git a/libraries/HTTPClient/library.properties b/libraries/HTTPClient/library.properties
index 347ac4f122f..f2dafc36d1b 100644
--- a/libraries/HTTPClient/library.properties
+++ b/libraries/HTTPClient/library.properties
@@ -1,5 +1,5 @@
 name=HTTPClient
-version=3.1.3
+version=3.2.0
 author=Markus Sattler
 maintainer=Markus Sattler
 sentence=HTTP Client for ESP32
diff --git a/libraries/HTTPUpdate/library.properties b/libraries/HTTPUpdate/library.properties
index 2bcb06bcad2..419f3b97b3f 100644
--- a/libraries/HTTPUpdate/library.properties
+++ b/libraries/HTTPUpdate/library.properties
@@ -1,5 +1,5 @@
 name=HTTPUpdate
-version=3.1.3
+version=3.2.0
 author=Markus Sattler
 maintainer=Markus Sattler
 sentence=Http Update for ESP32
diff --git a/libraries/HTTPUpdateServer/library.properties b/libraries/HTTPUpdateServer/library.properties
index 8eac2aab4cf..9c793a26ac8 100644
--- a/libraries/HTTPUpdateServer/library.properties
+++ b/libraries/HTTPUpdateServer/library.properties
@@ -1,5 +1,5 @@
 name=HTTPUpdateServer
-version=3.1.3
+version=3.2.0
 author=Hristo Kapanakov
 maintainer=
 sentence=Simple HTTP Update server based on the WebServer
diff --git a/libraries/Insights/library.properties b/libraries/Insights/library.properties
index b33dd15755a..fefe5aab177 100644
--- a/libraries/Insights/library.properties
+++ b/libraries/Insights/library.properties
@@ -1,5 +1,5 @@
 name=ESP Insights
-version=3.1.3
+version=3.2.0
 author=Sanket Wadekar <sanket.wadekar@espressif.com>
 maintainer=Sanket Wadekar <sanket.wadekar@espressif.com>
 sentence=ESP Insights
diff --git a/libraries/LittleFS/library.properties b/libraries/LittleFS/library.properties
index 233e5b1ab56..a9dae69b7f8 100644
--- a/libraries/LittleFS/library.properties
+++ b/libraries/LittleFS/library.properties
@@ -1,5 +1,5 @@
 name=LittleFS
-version=3.1.3
+version=3.2.0
 author=
 maintainer=
 sentence=LittleFS for esp32
diff --git a/libraries/Matter/examples/MatterColorLight/MatterColorLight.ino b/libraries/Matter/examples/MatterColorLight/MatterColorLight.ino
index dd1724f602d..f3e45887576 100644
--- a/libraries/Matter/examples/MatterColorLight/MatterColorLight.ino
+++ b/libraries/Matter/examples/MatterColorLight/MatterColorLight.ino
@@ -60,6 +60,10 @@ bool setLightState(bool state, espHsvColor_t colorHSV) {
     analogWrite(ledPin, colorHSV.v);
 #endif
   } else {
+#ifndef RGB_BUILTIN
+    // after analogWrite(), it is necessary to set the GPIO to digital mode first
+    pinMode(ledPin, OUTPUT);
+#endif
     digitalWrite(ledPin, LOW);
   }
   // store last HSV Color and OnOff state for when the Light is restarted / power goes off
diff --git a/libraries/Matter/examples/MatterComposedLights/MatterComposedLights.ino b/libraries/Matter/examples/MatterComposedLights/MatterComposedLights.ino
index 9c3dcf05a83..b98cc8e19c9 100644
--- a/libraries/Matter/examples/MatterComposedLights/MatterComposedLights.ino
+++ b/libraries/Matter/examples/MatterComposedLights/MatterComposedLights.ino
@@ -128,7 +128,7 @@ void loop() {
   // Onboard User Button is kept pressed for longer than 5 seconds in order to decommission matter node
   uint32_t time_diff = millis() - button_time_stamp;
   if (button_state && time_diff > decommissioningTimeout) {
-    Serial.println("Decommissioning the Light Matter Accessory. It shall be commissioned again.");
+    Serial.println("Decommissioning the Composed Light Matter Accessory. It shall be commissioned again.");
     Matter.decommission();
     button_time_stamp = millis();  // avoid running decommissining again, reboot takes a second or so
   }
diff --git a/libraries/Matter/examples/MatterContactSensor/MatterContactSensor.ino b/libraries/Matter/examples/MatterContactSensor/MatterContactSensor.ino
index e27f70e613d..e4c41460d3a 100644
--- a/libraries/Matter/examples/MatterContactSensor/MatterContactSensor.ino
+++ b/libraries/Matter/examples/MatterContactSensor/MatterContactSensor.ino
@@ -140,7 +140,7 @@ void loop() {
 
   // Onboard User Button is kept pressed for longer than 5 seconds in order to decommission matter node
   if (button_state && time_diff > decommissioningTimeout) {
-    Serial.println("Decommissioning the Generic Switch Matter Accessory. It shall be commissioned again.");
+    Serial.println("Decommissioning Contact Sensor Matter Accessory. It shall be commissioned again.");
     Matter.decommission();
     button_time_stamp = millis();  // avoid running decommissining again, reboot takes a second or so
   }
diff --git a/libraries/Matter/examples/MatterDimmableLight/MatterDimmableLight.ino b/libraries/Matter/examples/MatterDimmableLight/MatterDimmableLight.ino
index cb8b8b6f17f..79751905c20 100644
--- a/libraries/Matter/examples/MatterDimmableLight/MatterDimmableLight.ino
+++ b/libraries/Matter/examples/MatterDimmableLight/MatterDimmableLight.ino
@@ -56,6 +56,10 @@ bool setLightState(bool state, uint8_t brightness) {
     analogWrite(ledPin, brightness);
 #endif
   } else {
+#ifndef RGB_BUILTIN
+    // after analogWrite(), it is necessary to set the GPIO to digital mode first
+    pinMode(ledPin, OUTPUT);
+#endif
     digitalWrite(ledPin, LOW);
   }
   // store last Brightness and OnOff state for when the Light is restarted / power goes off
diff --git a/libraries/Matter/examples/MatterEnhancedColorLight/MatterEnhancedColorLight.ino b/libraries/Matter/examples/MatterEnhancedColorLight/MatterEnhancedColorLight.ino
index bd2d13899ca..8e12581fdf2 100644
--- a/libraries/Matter/examples/MatterEnhancedColorLight/MatterEnhancedColorLight.ino
+++ b/libraries/Matter/examples/MatterEnhancedColorLight/MatterEnhancedColorLight.ino
@@ -64,6 +64,10 @@ bool setLightState(bool state, espHsvColor_t colorHSV, uint8_t brighteness, uint
     analogWrite(ledPin, colorHSV.v);
 #endif
   } else {
+#ifndef RGB_BUILTIN
+    // after analogWrite(), it is necessary to set the GPIO to digital mode first
+    pinMode(ledPin, OUTPUT);
+#endif
     digitalWrite(ledPin, LOW);
   }
   // store last HSV Color and OnOff state for when the Light is restarted / power goes off
diff --git a/libraries/Matter/examples/MatterFan/MatterFan.ino b/libraries/Matter/examples/MatterFan/MatterFan.ino
index 3dc0c89fcf4..705aa4853da 100644
--- a/libraries/Matter/examples/MatterFan/MatterFan.ino
+++ b/libraries/Matter/examples/MatterFan/MatterFan.ino
@@ -49,6 +49,10 @@ void fanDCMotorDrive(bool fanState, uint8_t speedPercent) {
   // drive the Fan DC motor
   if (fanState == false) {
     // turn off the Fan
+#ifndef RGB_BUILTIN
+    // after analogWrite(), it is necessary to set the GPIO to digital mode first
+    pinMode(dcMotorPin, OUTPUT);
+#endif
     digitalWrite(dcMotorPin, LOW);
   } else {
     // set the Fan speed
@@ -180,7 +184,7 @@ void loop() {
 
   // Onboard User Button is kept pressed for longer than 5 seconds in order to decommission matter node
   if (button_state && time_diff > decommissioningTimeout) {
-    Serial.println("Decommissioning the Generic Switch Matter Accessory. It shall be commissioned again.");
+    Serial.println("Decommissioning Fan Matter Accessory. It shall be commissioned again.");
     Matter.decommission();
     button_time_stamp = millis();  // avoid running decommissining again, reboot takes a second or so
   }
diff --git a/libraries/Matter/examples/MatterHumiditySensor/MatterHumiditySensor.ino b/libraries/Matter/examples/MatterHumiditySensor/MatterHumiditySensor.ino
index 3fcab46c565..1c7889db849 100644
--- a/libraries/Matter/examples/MatterHumiditySensor/MatterHumiditySensor.ino
+++ b/libraries/Matter/examples/MatterHumiditySensor/MatterHumiditySensor.ino
@@ -122,7 +122,7 @@ void loop() {
   // Onboard User Button is kept pressed for longer than 5 seconds in order to decommission matter node
   uint32_t time_diff = millis() - button_time_stamp;
   if (button_state && time_diff > decommissioningTimeout) {
-    Serial.println("Decommissioning the Light Matter Accessory. It shall be commissioned again.");
+    Serial.println("Decommissioning Humidity Sensor Matter Accessory. It shall be commissioned again.");
     Matter.decommission();
   }
 
diff --git a/libraries/Matter/examples/MatterOccupancySensor/MatterOccupancySensor.ino b/libraries/Matter/examples/MatterOccupancySensor/MatterOccupancySensor.ino
index e88a9a8986b..333f178e9de 100644
--- a/libraries/Matter/examples/MatterOccupancySensor/MatterOccupancySensor.ino
+++ b/libraries/Matter/examples/MatterOccupancySensor/MatterOccupancySensor.ino
@@ -116,7 +116,7 @@ void loop() {
   // Onboard User Button is kept pressed for longer than 5 seconds in order to decommission matter node
   uint32_t time_diff = millis() - button_time_stamp;
   if (button_state && time_diff > decommissioningTimeout) {
-    Serial.println("Decommissioning the Generic Switch Matter Accessory. It shall be commissioned again.");
+    Serial.println("Decommissioning Occupancy Sensor Matter Accessory. It shall be commissioned again.");
     Matter.decommission();
     button_time_stamp = millis();  // avoid running decommissining again, reboot takes a second or so
   }
diff --git a/libraries/Matter/examples/MatterPressureSensor/MatterPressureSensor.ino b/libraries/Matter/examples/MatterPressureSensor/MatterPressureSensor.ino
index 394a217b87a..db035e951c9 100644
--- a/libraries/Matter/examples/MatterPressureSensor/MatterPressureSensor.ino
+++ b/libraries/Matter/examples/MatterPressureSensor/MatterPressureSensor.ino
@@ -122,8 +122,8 @@ void loop() {
   // Onboard User Button is kept pressed for longer than 5 seconds in order to decommission matter node
   uint32_t time_diff = millis() - button_time_stamp;
   if (button_state && time_diff > decommissioningTimeout) {
-    // Factory reset is triggered if the button is pressed longer than 10 seconds
-    Serial.println("Decommissioning the Light Matter Accessory. It shall be commissioned again.");
+    // Factory reset is triggered if the button is pressed longer than 5 seconds
+    Serial.println("Decommissioning Pressure Sensor Matter Accessory. It shall be commissioned again.");
     Matter.decommission();
   }
 
diff --git a/libraries/Matter/examples/MatterTemperatureLight/MatterTemperatureLight.ino b/libraries/Matter/examples/MatterTemperatureLight/MatterTemperatureLight.ino
index b814ba89704..d46427591ab 100644
--- a/libraries/Matter/examples/MatterTemperatureLight/MatterTemperatureLight.ino
+++ b/libraries/Matter/examples/MatterTemperatureLight/MatterTemperatureLight.ino
@@ -66,6 +66,10 @@ bool setLightState(bool state, uint8_t brightness, uint16_t temperature_Mireds)
     analogWrite(ledPin, brightness);
 #endif
   } else {
+#ifndef RGB_BUILTIN
+    // after analogWrite(), it is necessary to set the GPIO to digital mode first
+    pinMode(ledPin, OUTPUT);
+#endif
     digitalWrite(ledPin, LOW);
   }
   // store last Brightness and OnOff state for when the Light is restarted / power goes off
diff --git a/libraries/Matter/examples/MatterTemperatureSensor/MatterTemperatureSensor.ino b/libraries/Matter/examples/MatterTemperatureSensor/MatterTemperatureSensor.ino
index a2866e4655e..086155aeffe 100644
--- a/libraries/Matter/examples/MatterTemperatureSensor/MatterTemperatureSensor.ino
+++ b/libraries/Matter/examples/MatterTemperatureSensor/MatterTemperatureSensor.ino
@@ -122,7 +122,7 @@ void loop() {
   // Onboard User Button is kept pressed for longer than 5 seconds in order to decommission matter node
   uint32_t time_diff = millis() - button_time_stamp;
   if (button_state && time_diff > decommissioningTimeout) {
-    Serial.println("Decommissioning the Light Matter Accessory. It shall be commissioned again.");
+    Serial.println("Decommissioning Temperature Sensor Matter Accessory. It shall be commissioned again.");
     Matter.decommission();
     button_time_stamp = millis();  // avoid running decommissining again, reboot takes a second or so
   }
diff --git a/libraries/Matter/examples/MatterThermostat/MatterThermostat.ino b/libraries/Matter/examples/MatterThermostat/MatterThermostat.ino
index 508b508573a..bf76477c846 100644
--- a/libraries/Matter/examples/MatterThermostat/MatterThermostat.ino
+++ b/libraries/Matter/examples/MatterThermostat/MatterThermostat.ino
@@ -234,7 +234,7 @@ void loop() {
   // Onboard User Button is kept pressed for longer than 5 seconds in order to decommission matter node
   uint32_t time_diff = millis() - button_time_stamp;
   if (button_state && time_diff > decommissioningTimeout) {
-    Serial.println("Decommissioning the Light Matter Accessory. It shall be commissioned again.");
+    Serial.println("Decommissioning Thermostat Matter Accessory. It shall be commissioned again.");
     Matter.decommission();
     button_time_stamp = millis();  // avoid running decommissining again, reboot takes a second or so
   }
diff --git a/libraries/Matter/library.properties b/libraries/Matter/library.properties
index f0eea397fe8..ac9e0964ab5 100644
--- a/libraries/Matter/library.properties
+++ b/libraries/Matter/library.properties
@@ -1,5 +1,5 @@
 name=Matter
-version=3.1.3
+version=3.2.0
 author=Rodrigo Garcia | GitHub @SuGlider
 maintainer=Rodrigo Garcia <Rodrigo.Garcia@espressif.com>
 sentence=Library for supporting Matter environment on ESP32.
diff --git a/libraries/Matter/src/MatterEndpoints/MatterColorLight.h b/libraries/Matter/src/MatterEndpoints/MatterColorLight.h
index b896afa9b7a..99449addd50 100644
--- a/libraries/Matter/src/MatterEndpoints/MatterColorLight.h
+++ b/libraries/Matter/src/MatterEndpoints/MatterColorLight.h
@@ -66,8 +66,8 @@ class MatterColorLight : public MatterEndPoint {
 
 protected:
   bool started = false;
-  bool onOffState = false;       // default initial state is off, but it can be changed by begin(bool)
-  espHsvColor_t colorHSV = {0};  // default initial color HSV is black, but it can be changed by begin(bool, espHsvColor_t)
+  bool onOffState = false;             // default initial state is off, but it can be changed by begin(bool)
+  espHsvColor_t colorHSV = {0, 0, 0};  // default initial color HSV is black, but it can be changed by begin(bool, espHsvColor_t)
   EndPointOnOffCB _onChangeOnOffCB = NULL;
   EndPointRGBColorCB _onChangeColorCB = NULL;
   EndPointCB _onChangeCB = NULL;
diff --git a/libraries/Matter/src/MatterEndpoints/MatterEnhancedColorLight.h b/libraries/Matter/src/MatterEndpoints/MatterEnhancedColorLight.h
index ff6e69e3e65..a4baef968a4 100644
--- a/libraries/Matter/src/MatterEndpoints/MatterEnhancedColorLight.h
+++ b/libraries/Matter/src/MatterEndpoints/MatterEnhancedColorLight.h
@@ -91,7 +91,7 @@ class MatterEnhancedColorLight : public MatterEndPoint {
   bool started = false;
   bool onOffState = false;             // default initial state is off, but it can be changed by begin(bool)
   uint8_t brightnessLevel = 0;         // default initial brightness is 0, but it can be changed by begin(bool, uint8_t)
-  espHsvColor_t colorHSV = {0};        // default initial color HSV is black, but it can be changed by begin(bool, uint8_t, espHsvColor_t)
+  espHsvColor_t colorHSV = {0, 0, 0};  // default initial color HSV is black, but it can be changed by begin(bool, uint8_t, espHsvColor_t)
   uint16_t colorTemperatureLevel = 0;  // default initial color temperature is 0, but it can be changed by begin(bool, uint8_t, espHsvColor_t, uint16_t)
   EndPointOnOffCB _onChangeOnOffCB = NULL;
   EndPointBrightnessCB _onChangeBrightnessCB = NULL;
diff --git a/libraries/NetBIOS/library.properties b/libraries/NetBIOS/library.properties
index bf223a34828..5f134bfdc55 100644
--- a/libraries/NetBIOS/library.properties
+++ b/libraries/NetBIOS/library.properties
@@ -1,5 +1,5 @@
 name=NetBIOS
-version=3.1.3
+version=3.2.0
 author=Pablo@xpablo.cz
 maintainer=Hristo Gochkov<hristo@espressif.com>
 sentence=Enables NBNS (NetBIOS) name resolution.
diff --git a/libraries/Network/library.properties b/libraries/Network/library.properties
index bd5d5677dca..0b821e08d77 100644
--- a/libraries/Network/library.properties
+++ b/libraries/Network/library.properties
@@ -1,5 +1,5 @@
 name=Networking
-version=3.1.3
+version=3.2.0
 author=Hristo Gochkov
 maintainer=Hristo Gochkov <hristo@espressif.com>
 sentence=General network management library.
diff --git a/libraries/Network/src/NetworkClient.cpp b/libraries/Network/src/NetworkClient.cpp
index da83597d2c6..89411a42453 100644
--- a/libraries/Network/src/NetworkClient.cpp
+++ b/libraries/Network/src/NetworkClient.cpp
@@ -23,7 +23,11 @@
 #include <lwip/netdb.h>
 #include <errno.h>
 
-#define IN6_IS_ADDR_V4MAPPED(a) ((((__const uint32_t *)(a))[0] == 0) && (((__const uint32_t *)(a))[1] == 0) && (((__const uint32_t *)(a))[2] == htonl(0xffff)))
+// It is already defined in IDF as:
+//#define IN6_IS_ADDR_V4MAPPED(a)     ip6_addr_isipv4mappedipv6((ip6_addr_t*)(a))
+//#define ip6_addr_isipv4mappedipv6(ip6addr) (((ip6addr)->addr[0] == 0) && ((ip6addr)->addr[1] == 0) && (((ip6addr)->addr[2]) == PP_HTONL(0x0000FFFFUL)))
+// Keeping as a memory of the change.
+//#define _IN6_IS_ADDR_V4MAPPED(a) ((((__const uint32_t *)(a))[0] == 0) && (((__const uint32_t *)(a))[1] == 0) && (((__const uint32_t *)(a))[2] == htonl(0xffff)))
 
 #define WIFI_CLIENT_DEF_CONN_TIMEOUT_MS (3000)
 #define WIFI_CLIENT_MAX_WRITE_RETRY     (10)
diff --git a/libraries/NetworkClientSecure/library.properties b/libraries/NetworkClientSecure/library.properties
index 0754e59fba5..455dea6a2bf 100644
--- a/libraries/NetworkClientSecure/library.properties
+++ b/libraries/NetworkClientSecure/library.properties
@@ -1,5 +1,5 @@
 name=NetworkClientSecure
-version=3.1.3
+version=3.2.0
 author=Evandro Luis Copercini
 maintainer=Github Community
 sentence=Enables secure network connection (local and Internet) using the ESP32 built-in WiFi.
diff --git a/libraries/OpenThread/library.properties b/libraries/OpenThread/library.properties
index 078c4b58acc..0e547d188aa 100644
--- a/libraries/OpenThread/library.properties
+++ b/libraries/OpenThread/library.properties
@@ -1,5 +1,5 @@
 name=OpenThread
-version=3.1.3
+version=3.2.0
 author=Rodrigo Garcia | GitHub @SuGlider
 maintainer=Rodrigo Garcia <Rodrigo.Garcia@espressif.com>
 sentence=Library for OpenThread Network on ESP32.
diff --git a/libraries/PPP/library.properties b/libraries/PPP/library.properties
index 2d5d3d83877..7158a027b0a 100644
--- a/libraries/PPP/library.properties
+++ b/libraries/PPP/library.properties
@@ -1,5 +1,5 @@
 name=PPP
-version=3.1.3
+version=3.2.0
 author=Hristo Gochkov
 maintainer=Hristo Gochkov <hristo@espressif.com>
 sentence=Enables network connection using GSM Modem.
diff --git a/libraries/PPP/src/PPP.cpp b/libraries/PPP/src/PPP.cpp
index 77b70d3969c..87fee6920c3 100644
--- a/libraries/PPP/src/PPP.cpp
+++ b/libraries/PPP/src/PPP.cpp
@@ -152,7 +152,8 @@ esp_modem_dce_t *PPPClass::handle() const {
 
 PPPClass::PPPClass()
   : _dce(NULL), _pin_tx(-1), _pin_rx(-1), _pin_rts(-1), _pin_cts(-1), _flow_ctrl(ESP_MODEM_FLOW_CONTROL_NONE), _pin_rst(-1), _pin_rst_act_low(true),
-    _pin_rst_delay(200), _pin(NULL), _apn(NULL), _rx_buffer_size(4096), _tx_buffer_size(512), _mode(ESP_MODEM_MODE_COMMAND), _uart_num(UART_NUM_1) {}
+    _pin_rst_delay(200), _pin(NULL), _apn(NULL), _rx_buffer_size(4096), _tx_buffer_size(512), _mode(ESP_MODEM_MODE_COMMAND), _uart_num(UART_NUM_1),
+    _ppp_event_handle(0) {}
 
 PPPClass::~PPPClass() {}
 
@@ -360,7 +361,7 @@ bool PPPClass::begin(ppp_modem_model_t model, uint8_t uart_num, int baud_rate) {
     }
   }
 
-  Network.onSysEvent(onPppArduinoEvent);
+  _ppp_event_handle = Network.onSysEvent(onPppArduinoEvent);
 
   setStatusBits(ESP_NETIF_STARTED_BIT);
   arduino_event_t arduino_event;
@@ -402,7 +403,8 @@ void PPPClass::end(void) {
   }
   _esp_modem = NULL;
 
-  Network.removeEvent(onPppArduinoEvent);
+  Network.removeEvent(_ppp_event_handle);
+  _ppp_event_handle = 0;
 
   if (_dce != NULL) {
     esp_modem_destroy(_dce);
diff --git a/libraries/PPP/src/PPP.h b/libraries/PPP/src/PPP.h
index b8e1f7ad56f..b317f52aefc 100644
--- a/libraries/PPP/src/PPP.h
+++ b/libraries/PPP/src/PPP.h
@@ -108,6 +108,7 @@ class PPPClass : public NetworkInterface {
   int _tx_buffer_size;
   esp_modem_dce_mode_t _mode;
   uint8_t _uart_num;
+  network_event_handle_t _ppp_event_handle;
 
   static bool pppDetachBus(void *bus_pointer);
 };
diff --git a/libraries/Preferences/library.properties b/libraries/Preferences/library.properties
index f6cdb8a074c..eb0158e4932 100644
--- a/libraries/Preferences/library.properties
+++ b/libraries/Preferences/library.properties
@@ -1,5 +1,5 @@
 name=Preferences
-version=3.1.3
+version=3.2.0
 author=Hristo Gochkov
 maintainer=Hristo Gochkov <hristo@espressif.com>
 sentence=Provides friendly access to ESP32's Non-Volatile Storage
diff --git a/libraries/RainMaker/examples/RMakerCustom/ci.json b/libraries/RainMaker/examples/RMakerCustom/ci.json
index 1c80eda1d90..ce63fe9ccf0 100644
--- a/libraries/RainMaker/examples/RMakerCustom/ci.json
+++ b/libraries/RainMaker/examples/RMakerCustom/ci.json
@@ -1,4 +1,7 @@
 {
+  "targets": {
+    "esp32": false
+  },
   "fqbn_append": "PartitionScheme=rainmaker_4MB",
   "requires": [
     "CONFIG_ESP_RMAKER_WORK_QUEUE_TASK_STACK=[1-9][0-9]*"
diff --git a/libraries/RainMaker/examples/RMakerSwitch/ci.json b/libraries/RainMaker/examples/RMakerSwitch/ci.json
index 1c80eda1d90..ce63fe9ccf0 100644
--- a/libraries/RainMaker/examples/RMakerSwitch/ci.json
+++ b/libraries/RainMaker/examples/RMakerSwitch/ci.json
@@ -1,4 +1,7 @@
 {
+  "targets": {
+    "esp32": false
+  },
   "fqbn_append": "PartitionScheme=rainmaker_4MB",
   "requires": [
     "CONFIG_ESP_RMAKER_WORK_QUEUE_TASK_STACK=[1-9][0-9]*"
diff --git a/libraries/RainMaker/library.properties b/libraries/RainMaker/library.properties
index 6b8ba658eb4..95ce14d6708 100644
--- a/libraries/RainMaker/library.properties
+++ b/libraries/RainMaker/library.properties
@@ -1,5 +1,5 @@
 name=ESP RainMaker
-version=3.1.3
+version=3.2.0
 author=Sweety Mhaiske <switi.mhaiske@espressif.com>
 maintainer=Hristo Gochkov <hristo@espressif.com>
 sentence=ESP RainMaker Support
diff --git a/libraries/SD/library.properties b/libraries/SD/library.properties
index 00766c48470..66c4f5cfafd 100644
--- a/libraries/SD/library.properties
+++ b/libraries/SD/library.properties
@@ -1,5 +1,5 @@
 name=SD
-version=3.1.3
+version=3.2.0
 author=Arduino, SparkFun
 maintainer=Arduino <info@arduino.cc>
 sentence=Enables reading and writing on SD cards. For all Arduino boards.
diff --git a/libraries/SD_MMC/library.properties b/libraries/SD_MMC/library.properties
index 0cc0a80afd2..855390e5057 100644
--- a/libraries/SD_MMC/library.properties
+++ b/libraries/SD_MMC/library.properties
@@ -1,5 +1,5 @@
 name=SD_MMC
-version=3.1.3
+version=3.2.0
 author=Hristo Gochkov, Ivan Grokhtkov
 maintainer=Hristo Gochkov <hristo@espressif.com>
 sentence=ESP32 SDMMC File System
diff --git a/libraries/SPI/library.properties b/libraries/SPI/library.properties
index 57e44241438..64db93aceeb 100644
--- a/libraries/SPI/library.properties
+++ b/libraries/SPI/library.properties
@@ -1,5 +1,5 @@
 name=SPI
-version=3.1.3
+version=3.2.0
 author=Hristo Gochkov
 maintainer=Hristo Gochkov <hristo@espressif.com>
 sentence=Enables the communication with devices that use the Serial Peripheral Interface (SPI) Bus. For all Arduino boards, BUT Arduino DUE.
diff --git a/libraries/SPIFFS/library.properties b/libraries/SPIFFS/library.properties
index 5ecc75c000d..78f77fe9794 100644
--- a/libraries/SPIFFS/library.properties
+++ b/libraries/SPIFFS/library.properties
@@ -1,5 +1,5 @@
 name=SPIFFS
-version=3.1.3
+version=3.2.0
 author=Hristo Gochkov, Ivan Grokhtkov
 maintainer=Hristo Gochkov <hristo@espressif.com>
 sentence=ESP32 SPIFFS File System
diff --git a/libraries/SimpleBLE/library.properties b/libraries/SimpleBLE/library.properties
index d5570c41751..ad5e10d3acb 100644
--- a/libraries/SimpleBLE/library.properties
+++ b/libraries/SimpleBLE/library.properties
@@ -1,5 +1,5 @@
 name=SimpleBLE
-version=3.1.3
+version=3.2.0
 author=Hristo Gochkov
 maintainer=Hristo Gochkov <hristo@espressif.com>
 sentence=Provides really simple BLE advertizer with just on and off
diff --git a/libraries/TFLiteMicro/library.properties b/libraries/TFLiteMicro/library.properties
index 259df824a45..1e8db045610 100644
--- a/libraries/TFLiteMicro/library.properties
+++ b/libraries/TFLiteMicro/library.properties
@@ -1,5 +1,5 @@
 name=TFLite Micro
-version=3.1.3
+version=3.2.0
 author=Sanket Wadekar
 maintainer=Sanket Wadekar
 sentence=TensorFlow Lite for Microcontrollers
diff --git a/libraries/Ticker/library.properties b/libraries/Ticker/library.properties
index 7f2cdab5220..975db96d1ad 100644
--- a/libraries/Ticker/library.properties
+++ b/libraries/Ticker/library.properties
@@ -1,5 +1,5 @@
 name=Ticker
-version=3.1.3
+version=3.2.0
 author=Bert Melis
 maintainer=Hristo Gochkov <hristo@espressif.com>
 sentence=Allows to call functions with a given interval.
diff --git a/libraries/USB/library.properties b/libraries/USB/library.properties
index e0bc6c4b7e7..9d47dfc6719 100644
--- a/libraries/USB/library.properties
+++ b/libraries/USB/library.properties
@@ -1,5 +1,5 @@
 name=USB
-version=3.1.3
+version=3.2.0
 author=Hristo Gochkov
 maintainer=Hristo Gochkov <hristo@espressif.com>
 sentence=ESP32S2 USB Library
diff --git a/libraries/Update/library.properties b/libraries/Update/library.properties
index f81897a64d6..c3ee8f7e506 100644
--- a/libraries/Update/library.properties
+++ b/libraries/Update/library.properties
@@ -1,5 +1,5 @@
 name=Update
-version=3.1.3
+version=3.2.0
 author=Hristo Gochkov
 maintainer=Hristo Gochkov <hristo@espressif.com>
 sentence=ESP32 Sketch Update Library
diff --git a/libraries/WebServer/library.properties b/libraries/WebServer/library.properties
index c9153541cb2..2a9ff530d57 100644
--- a/libraries/WebServer/library.properties
+++ b/libraries/WebServer/library.properties
@@ -1,5 +1,5 @@
 name=WebServer
-version=3.1.3
+version=3.2.0
 author=Ivan Grokhotkov
 maintainer=Ivan Grokhtkov <ivan@esp8266.com>
 sentence=Simple web server library
diff --git a/libraries/WiFi/library.properties b/libraries/WiFi/library.properties
index e72f082f8e6..03112c2fcc6 100644
--- a/libraries/WiFi/library.properties
+++ b/libraries/WiFi/library.properties
@@ -1,5 +1,5 @@
 name=WiFi
-version=3.1.3
+version=3.2.0
 author=Hristo Gochkov
 maintainer=Hristo Gochkov <hristo@espressif.com>
 sentence=Enables network connection (local and Internet) using the ESP32 built-in WiFi.
diff --git a/libraries/WiFi/src/AP.cpp b/libraries/WiFi/src/AP.cpp
index b713a6d3901..0e7839764ea 100644
--- a/libraries/WiFi/src/AP.cpp
+++ b/libraries/WiFi/src/AP.cpp
@@ -148,7 +148,7 @@ void APClass::_onApEvent(int32_t event_id, void *event_data) {
   }
 }
 
-APClass::APClass() {
+APClass::APClass() : _wifi_ap_event_handle(0) {
   _ap_network_if = this;
 }
 
@@ -163,7 +163,7 @@ bool APClass::onEnable() {
     return false;
   }
   if (_esp_netif == NULL) {
-    Network.onSysEvent(_onApArduinoEvent);
+    _wifi_ap_event_handle = Network.onSysEvent(_onApArduinoEvent);
     _esp_netif = get_esp_interface_netif(ESP_IF_WIFI_AP);
     /* attach to receive events */
     initNetif(ESP_NETIF_ID_AP);
@@ -172,7 +172,8 @@ bool APClass::onEnable() {
 }
 
 bool APClass::onDisable() {
-  Network.removeEvent(_onApArduinoEvent);
+  Network.removeEvent(_wifi_ap_event_handle);
+  _wifi_ap_event_handle = 0;
   // we just set _esp_netif to NULL here, so destroyNetif() does not try to destroy it.
   // That would be done by WiFi.enableAP(false) if STA is not enabled, or when it gets disabled
   _esp_netif = NULL;
diff --git a/libraries/WiFi/src/STA.cpp b/libraries/WiFi/src/STA.cpp
index 547a27d1c47..84258589b28 100644
--- a/libraries/WiFi/src/STA.cpp
+++ b/libraries/WiFi/src/STA.cpp
@@ -228,7 +228,8 @@ void STAClass::_onStaEvent(int32_t event_id, void *event_data) {
 }
 
 STAClass::STAClass()
-  : _minSecurity(WIFI_AUTH_WPA2_PSK), _scanMethod(WIFI_FAST_SCAN), _sortMethod(WIFI_CONNECT_AP_BY_SIGNAL), _autoReconnect(true), _status(WL_STOPPED) {
+  : _minSecurity(WIFI_AUTH_WPA2_PSK), _scanMethod(WIFI_FAST_SCAN), _sortMethod(WIFI_CONNECT_AP_BY_SIGNAL), _autoReconnect(true), _status(WL_STOPPED),
+    _wifi_sta_event_handle(0) {
   _sta_network_if = this;
 }
 
@@ -276,14 +277,15 @@ bool STAClass::onEnable() {
       return false;
     }
     /* attach to receive events */
-    Network.onSysEvent(_onStaArduinoEvent);
+    _wifi_sta_event_handle = Network.onSysEvent(_onStaArduinoEvent);
     initNetif(ESP_NETIF_ID_STA);
   }
   return true;
 }
 
 bool STAClass::onDisable() {
-  Network.removeEvent(_onStaArduinoEvent);
+  Network.removeEvent(_wifi_sta_event_handle);
+  _wifi_sta_event_handle = 0;
   // we just set _esp_netif to NULL here, so destroyNetif() does not try to destroy it.
   // That would be done by WiFi.enableSTA(false) if AP is not enabled, or when it gets disabled
   _esp_netif = NULL;
diff --git a/libraries/WiFi/src/WiFiAP.h b/libraries/WiFi/src/WiFiAP.h
index e80f91fa26c..540ec87f44f 100644
--- a/libraries/WiFi/src/WiFiAP.h
+++ b/libraries/WiFi/src/WiFiAP.h
@@ -60,6 +60,8 @@ class APClass : public NetworkInterface {
   void _onApEvent(int32_t event_id, void *event_data);
 
 protected:
+  network_event_handle_t _wifi_ap_event_handle;
+
   size_t printDriverInfo(Print &out) const;
 
   friend class WiFiGenericClass;
diff --git a/libraries/WiFi/src/WiFiGeneric.cpp b/libraries/WiFi/src/WiFiGeneric.cpp
index 40e3b12c687..aa994963514 100644
--- a/libraries/WiFi/src/WiFiGeneric.cpp
+++ b/libraries/WiFi/src/WiFiGeneric.cpp
@@ -308,7 +308,7 @@ bool wifiLowLevelInit(bool persistent) {
 
     esp_err_t err = esp_wifi_init(&cfg);
     if (err) {
-      log_e("esp_wifi_init %d", err);
+      log_e("esp_wifi_init 0x%x: %s", err, esp_err_to_name(err));
       lowLevelInitDone = false;
       return lowLevelInitDone;
     }
@@ -375,7 +375,7 @@ static bool espWiFiStart() {
   esp_err_t err = esp_wifi_start();
   if (err != ESP_OK) {
     _esp_wifi_started = false;
-    log_e("esp_wifi_start %d", err);
+    log_e("esp_wifi_start 0x%x: %s", err, esp_err_to_name(err));
     return _esp_wifi_started;
   }
   return _esp_wifi_started;
@@ -389,7 +389,7 @@ static bool espWiFiStop() {
   _esp_wifi_started = false;
   err = esp_wifi_stop();
   if (err) {
-    log_e("Could not stop WiFi! %d", err);
+    log_e("Could not stop WiFi! 0x%x: %s", err, esp_err_to_name(err));
     _esp_wifi_started = true;
     return false;
   }
@@ -478,7 +478,7 @@ int WiFiGenericClass::setChannel(uint8_t primary, wifi_second_chan_t secondary)
 
   ret = esp_wifi_get_country(&country);
   if (ret != ESP_OK) {
-    log_e("Failed to get country info");
+    log_e("Failed to get country info 0x%x: %s", ret, esp_err_to_name(ret));
     return ret;
   }
 
@@ -492,7 +492,7 @@ int WiFiGenericClass::setChannel(uint8_t primary, wifi_second_chan_t secondary)
 
   ret = esp_wifi_set_channel(primary, secondary);
   if (ret != ESP_OK) {
-    log_e("Failed to set channel");
+    log_e("Failed to set channel 0x%x: %s", ret, esp_err_to_name(ret));
     return ret;
   }
 
@@ -562,13 +562,13 @@ bool WiFiGenericClass::mode(wifi_mode_t m) {
   if (((m & WIFI_MODE_STA) != 0) && ((cm & WIFI_MODE_STA) == 0)) {
     err = esp_netif_set_hostname(esp_netifs[ESP_IF_WIFI_STA], NetworkManager::getHostname());
     if (err) {
-      log_e("Could not set hostname! %d", err);
+      log_e("Could not set hostname! 0x%x: %s", err, esp_err_to_name(err));
       return false;
     }
   }
   err = esp_wifi_set_mode(m);
   if (err) {
-    log_e("Could not set mode! %d", err);
+    log_e("Could not set mode! 0x%x: %s", err, esp_err_to_name(err));
     return false;
   }
 
@@ -585,17 +585,44 @@ bool WiFiGenericClass::mode(wifi_mode_t m) {
     if (m & WIFI_MODE_STA) {
       err = esp_wifi_set_protocol(WIFI_IF_STA, WIFI_PROTOCOL_LR);
       if (err != ESP_OK) {
-        log_e("Could not enable long range on STA! %d", err);
+        log_e("Could not enable long range on STA! 0x%x: %s", err, esp_err_to_name(err));
         return false;
       }
     }
     if (m & WIFI_MODE_AP) {
       err = esp_wifi_set_protocol(WIFI_IF_AP, WIFI_PROTOCOL_LR);
       if (err != ESP_OK) {
-        log_e("Could not enable long range on AP! %d", err);
+        log_e("Could not enable long range on AP! 0x%x: %s", err, esp_err_to_name(err));
         return false;
       }
     }
+  } else {
+#if CONFIG_SOC_WIFI_HE_SUPPORT
+#define WIFI_PROTOCOL_DEFAULT (WIFI_PROTOCOL_11B | WIFI_PROTOCOL_11G | WIFI_PROTOCOL_11N | WIFI_PROTOCOL_11AX)
+#else
+#define WIFI_PROTOCOL_DEFAULT (WIFI_PROTOCOL_11B | WIFI_PROTOCOL_11G | WIFI_PROTOCOL_11N)
+#endif
+    uint8_t current_protocol = 0;
+    if (m & WIFI_MODE_STA) {
+      err = esp_wifi_get_protocol(WIFI_IF_STA, &current_protocol);
+      if (err == ESP_OK && current_protocol == WIFI_PROTOCOL_LR) {
+        log_v("Disabling long range on STA");
+        err = esp_wifi_set_protocol(WIFI_IF_STA, WIFI_PROTOCOL_DEFAULT);
+        if (err != ESP_OK) {
+          log_e("Could not disable long range on STA! 0x%x: %s", err, esp_err_to_name(err));
+        }
+      }
+    }
+    if (m & WIFI_MODE_AP) {
+      err = esp_wifi_get_protocol(WIFI_IF_AP, &current_protocol);
+      if (err == ESP_OK && current_protocol == WIFI_PROTOCOL_LR) {
+        log_v("Disabling long range on AP");
+        err = esp_wifi_set_protocol(WIFI_IF_AP, WIFI_PROTOCOL_DEFAULT);
+        if (err != ESP_OK) {
+          log_e("Could not disable long range on AP! 0x%x: %s", err, esp_err_to_name(err));
+        }
+      }
+    }
   }
   if (!espWiFiStart()) {
     return false;
@@ -683,8 +710,9 @@ bool WiFiGenericClass::setSleep(wifi_ps_type_t sleepType) {
   if (sleepType != _sleepEnabled) {
     _sleepEnabled = sleepType;
     if (WiFi.STA.started()) {
-      if (esp_wifi_set_ps(_sleepEnabled) != ESP_OK) {
-        log_e("esp_wifi_set_ps failed!");
+      esp_err_t err = esp_wifi_set_ps(_sleepEnabled);
+      if (err != ESP_OK) {
+        log_e("esp_wifi_set_ps failed!: 0x%x: %s", err, esp_err_to_name(err));
         return false;
       }
     }
@@ -748,8 +776,9 @@ bool WiFiGenericClass::initiateFTM(uint8_t frm_count, uint16_t burst_period, uin
     memcpy(ftmi_cfg.resp_mac, mac, 6);
   }
   // Request FTM session with the Responder
-  if (ESP_OK != esp_wifi_ftm_initiate_session(&ftmi_cfg)) {
-    log_e("Failed to initiate FTM session");
+  esp_err_t err = esp_wifi_ftm_initiate_session(&ftmi_cfg);
+  if (ESP_OK != err) {
+    log_e("Failed to initiate FTM session: 0x%x: %s", err, esp_err_to_name(err));
     return false;
   }
   return true;
@@ -768,8 +797,9 @@ bool WiFiGenericClass::setDualAntennaConfig(uint8_t gpio_ant1, uint8_t gpio_ant2
 
   esp_phy_ant_gpio_config_t wifi_ant_io;
 
-  if (ESP_OK != esp_phy_get_ant_gpio(&wifi_ant_io)) {
-    log_e("Failed to get antenna configuration");
+  esp_err_t err = esp_phy_get_ant_gpio(&wifi_ant_io);
+  if (ESP_OK != err) {
+    log_e("Failed to get antenna configuration: 0x%x: %s", err, esp_err_to_name(err));
     return false;
   }
 
@@ -778,8 +808,9 @@ bool WiFiGenericClass::setDualAntennaConfig(uint8_t gpio_ant1, uint8_t gpio_ant2
   wifi_ant_io.gpio_cfg[1].gpio_num = gpio_ant2;
   wifi_ant_io.gpio_cfg[1].gpio_select = 1;
 
-  if (ESP_OK != esp_phy_set_ant_gpio(&wifi_ant_io)) {
-    log_e("Failed to set antenna GPIO configuration");
+  err = esp_phy_set_ant_gpio(&wifi_ant_io);
+  if (ESP_OK != err) {
+    log_e("Failed to set antenna GPIO configuration: 0x%x: %s", err, esp_err_to_name(err));
     return false;
   }
 
@@ -827,8 +858,9 @@ bool WiFiGenericClass::setDualAntennaConfig(uint8_t gpio_ant1, uint8_t gpio_ant2
   }
 
 set_ant:
-  if (ESP_OK != esp_phy_set_ant(&ant_config)) {
-    log_e("Failed to set antenna configuration");
+  err = esp_phy_set_ant(&ant_config);
+  if (ESP_OK != err) {
+    log_e("Failed to set antenna configuration: 0x%x: %s", err, esp_err_to_name(err));
     return false;
   }
 #endif
diff --git a/libraries/WiFi/src/WiFiSTA.h b/libraries/WiFi/src/WiFiSTA.h
index 3c8adbd8502..6063eae7968 100644
--- a/libraries/WiFi/src/WiFiSTA.h
+++ b/libraries/WiFi/src/WiFiSTA.h
@@ -95,6 +95,7 @@ class STAClass : public NetworkInterface {
   wifi_sort_method_t _sortMethod;
   bool _autoReconnect;
   wl_status_t _status;
+  network_event_handle_t _wifi_sta_event_handle;
 
   size_t printDriverInfo(Print &out) const;
 
diff --git a/libraries/WiFi/src/WiFiScan.cpp b/libraries/WiFi/src/WiFiScan.cpp
index 27d9edcc70c..086b875fcb2 100644
--- a/libraries/WiFi/src/WiFiScan.cpp
+++ b/libraries/WiFi/src/WiFiScan.cpp
@@ -92,9 +92,6 @@ int16_t
   }
   if (esp_wifi_scan_start(&config, false) == ESP_OK) {
     _scanStarted = millis();
-    if (!_scanStarted) {  //Prevent 0 from millis overflow
-      ++_scanStarted;
-    }
 
     WiFiGenericClass::clearStatusBits(WIFI_SCAN_DONE_BIT);
     WiFiGenericClass::setStatusBits(WIFI_SCANNING_BIT);
@@ -118,21 +115,20 @@ int16_t
 void WiFiScanClass::_scanDone() {
   esp_wifi_scan_get_ap_num(&(WiFiScanClass::_scanCount));
   if (WiFiScanClass::_scanResult) {
-    delete[] reinterpret_cast<wifi_ap_record_t *>(WiFiScanClass::_scanResult);
-    WiFiScanClass::_scanResult = nullptr;
+    free(WiFiScanClass::_scanResult);
+    WiFiScanClass::_scanResult = NULL;
   }
 
   if (WiFiScanClass::_scanCount) {
-    WiFiScanClass::_scanResult = new (std::nothrow) wifi_ap_record_t[WiFiScanClass::_scanCount];
+    WiFiScanClass::_scanResult = calloc(WiFiScanClass::_scanCount, sizeof(wifi_ap_record_t));
     if (!WiFiScanClass::_scanResult) {
       WiFiScanClass::_scanCount = 0;
     } else if (esp_wifi_scan_get_ap_records(&(WiFiScanClass::_scanCount), (wifi_ap_record_t *)_scanResult) != ESP_OK) {
-      delete[] reinterpret_cast<wifi_ap_record_t *>(WiFiScanClass::_scanResult);
-      WiFiScanClass::_scanResult = nullptr;
+      free(WiFiScanClass::_scanResult);
+      WiFiScanClass::_scanResult = NULL;
       WiFiScanClass::_scanCount = 0;
     }
   }
-  WiFiScanClass::_scanStarted = 0;  //Reset after a scan is completed for normal behavior
   WiFiGenericClass::setStatusBits(WIFI_SCAN_DONE_BIT);
   WiFiGenericClass::clearStatusBits(WIFI_SCANNING_BIT);
 }
@@ -161,15 +157,13 @@ int16_t WiFiScanClass::scanComplete() {
   }
 
   if (WiFiGenericClass::getStatusBits() & WIFI_SCANNING_BIT) {
+    // Check if the delay expired, return WIFI_SCAN_FAILED in this case
+    if ((millis() - WiFiScanClass::_scanStarted) > WiFiScanClass::_scanTimeout) {
+      WiFiGenericClass::clearStatusBits(WIFI_SCANNING_BIT);
+      return WIFI_SCAN_FAILED;
+    }
     return WIFI_SCAN_RUNNING;
   }
-  // last one to avoid time affecting Async mode
-  if (WiFiScanClass::_scanStarted
-      && (millis() - WiFiScanClass::_scanStarted)
-           > WiFiScanClass::_scanTimeout) {  //Check is scan was started and if the delay expired, return WIFI_SCAN_FAILED in this case
-    WiFiGenericClass::clearStatusBits(WIFI_SCANNING_BIT);
-    return WIFI_SCAN_FAILED;
-  }
 
   return WIFI_SCAN_FAILED;
 }
@@ -179,11 +173,12 @@ int16_t WiFiScanClass::scanComplete() {
  */
 void WiFiScanClass::scanDelete() {
   WiFiGenericClass::clearStatusBits(WIFI_SCAN_DONE_BIT);
+  WiFiGenericClass::clearStatusBits(WIFI_SCANNING_BIT);
   if (WiFiScanClass::_scanResult) {
-    delete[] reinterpret_cast<wifi_ap_record_t *>(WiFiScanClass::_scanResult);
-    WiFiScanClass::_scanResult = nullptr;
-    WiFiScanClass::_scanCount = 0;
+    free(WiFiScanClass::_scanResult);
+    WiFiScanClass::_scanResult = NULL;
   }
+  WiFiScanClass::_scanCount = 0;
 }
 
 /**
diff --git a/libraries/WiFiProv/library.properties b/libraries/WiFiProv/library.properties
index 6334a5be5c4..13a63c50bb1 100644
--- a/libraries/WiFiProv/library.properties
+++ b/libraries/WiFiProv/library.properties
@@ -1,5 +1,5 @@
 name=WiFiProv
-version=3.1.3
+version=3.2.0
 author=Switi Mhaiske <sweetymhaiske@gmail.com>
 maintainer=Hristo Gochkov <hristo@espressif.com>
 sentence=Enables provisioning.
diff --git a/libraries/Wire/library.properties b/libraries/Wire/library.properties
index 044ba74c3d0..655f4bd3194 100644
--- a/libraries/Wire/library.properties
+++ b/libraries/Wire/library.properties
@@ -1,5 +1,5 @@
 name=Wire
-version=3.1.3
+version=3.2.0
 author=Hristo Gochkov
 maintainer=Hristo Gochkov <hristo@espressif.com>
 sentence=Allows the communication between devices or sensors connected via Two Wire Interface Bus. For esp8266 boards.
diff --git a/libraries/Wire/src/Wire.cpp b/libraries/Wire/src/Wire.cpp
index 24b0eb7c0a3..f8d9496389f 100644
--- a/libraries/Wire/src/Wire.cpp
+++ b/libraries/Wire/src/Wire.cpp
@@ -462,10 +462,11 @@ uint8_t TwoWire::endTransmission(bool sendStop) {
     nonStop = true;
   }
   switch (err) {
-    case ESP_OK:          return 0;
-    case ESP_FAIL:        return 2;
-    case ESP_ERR_TIMEOUT: return 5;
-    default:              break;
+    case ESP_OK:            return 0;
+    case ESP_FAIL:          return 2;
+    case ESP_ERR_NOT_FOUND: return 2;
+    case ESP_ERR_TIMEOUT:   return 5;
+    default:                break;
   }
   return 4;
 }
@@ -646,8 +647,16 @@ void TwoWire::onRequestService(uint8_t num, void *arg) {
 #endif /* SOC_I2C_SUPPORT_SLAVE */
 
 TwoWire Wire = TwoWire(0);
+#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 4, 0)
+#if SOC_I2C_NUM > 1
+TwoWire Wire1 = TwoWire(1);
+#elif SOC_I2C_NUM > 2
+TwoWire Wire2 = TwoWire(2);
+#endif /* SOC_I2C_NUM */
+#else
 #if SOC_HP_I2C_NUM > 1
 TwoWire Wire1 = TwoWire(1);
 #endif /* SOC_HP_I2C_NUM */
+#endif
 
 #endif /* SOC_I2C_SUPPORTED */
diff --git a/libraries/Wire/src/Wire.h b/libraries/Wire/src/Wire.h
index 45f30c81ffc..0deab7d4a57 100644
--- a/libraries/Wire/src/Wire.h
+++ b/libraries/Wire/src/Wire.h
@@ -28,6 +28,7 @@
 
 #include "soc/soc_caps.h"
 #if SOC_I2C_SUPPORTED
+#include "esp_idf_version.h"
 
 #include <esp32-hal.h>
 #include <esp32-hal-log.h>
@@ -144,9 +145,17 @@ class TwoWire : public HardwareI2C {
 };
 
 extern TwoWire Wire;
+#if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 4, 0)
+#if SOC_I2C_NUM > 1
+extern TwoWire Wire1;
+#elif SOC_I2C_NUM > 2
+extern TwoWire Wire2;
+#endif /* SOC_I2C_NUM */
+#else
 #if SOC_HP_I2C_NUM > 1
 extern TwoWire Wire1;
 #endif /* SOC_HP_I2C_NUM */
+#endif
 
 #endif /* SOC_I2C_SUPPORTED */
 #endif /* TwoWire_h */
diff --git a/libraries/Zigbee/examples/Zigbee_Analog_Input_Output/README.md b/libraries/Zigbee/examples/Zigbee_Analog_Input_Output/README.md
new file mode 100644
index 00000000000..d62941755c7
--- /dev/null
+++ b/libraries/Zigbee/examples/Zigbee_Analog_Input_Output/README.md
@@ -0,0 +1,72 @@
+# Arduino-ESP32 Zigbee Analog Input Output Example
+
+This example shows how to configure the Zigbee end device and use it as a Home Automation (HA) analog input/output device.
+
+# Supported Targets
+
+Currently, this example supports the following targets.
+
+| Supported Targets | ESP32-C6 | ESP32-H2 |
+| ----------------- | -------- | -------- |
+
+## Analog Sensor Functions
+
+ * After this board first starts up, it would be configured locally to report an analog input on change or every 30 seconds.
+ * By clicking the button (BOOT) on this board, this board will immediately send a report of the current measured  value to the network.
+
+## Hardware Required
+
+* A USB cable for power supply and programming
+
+### Configure the Project
+
+Set the ADC GPIO by changing the `analogPin` variable. By default, it's the pin `A0`.
+Set the Button GPIO by changing the `button` variable. By default, it's the pin `BOOT_PIN` (BOOT button on ESP32-C6 and ESP32-H2).
+
+#### Using Arduino IDE
+
+To get more information about the Espressif boards see [Espressif Development Kits](https://www.espressif.com/en/products/devkits).
+
+* Before Compile/Verify, select the correct board: `Tools -> Board`.
+* Select the End device Zigbee mode: `Tools -> Zigbee mode: Zigbee ED (end device)`
+* Select Partition Scheme for Zigbee: `Tools -> Partition Scheme: Zigbee 4MB with spiffs`
+* Select the COM port: `Tools -> Port: xxx` where the `xxx` is the detected COM port.
+* Optional: Set debug level to verbose to see all logs from Zigbee stack: `Tools -> Core Debug Level: Verbose`.
+
+## Troubleshooting
+
+If the End device flashed with this example is not connecting to the coordinator, erase the flash of the End device before flashing the example to the board. It is recommended to do this if you re-flash the coordinator.
+You can do the following:
+
+* In the Arduino IDE go to the Tools menu and set `Erase All Flash Before Sketch Upload` to `Enabled`.
+* Add to the sketch `Zigbee.factoryReset();` to reset the device and Zigbee stack.
+
+By default, the coordinator network is closed after rebooting or flashing new firmware.
+To open the network you have 2 options:
+
+* Open network after reboot by setting `Zigbee.setRebootOpenNetwork(time);` before calling `Zigbee.begin();`.
+* In application you can anytime call `Zigbee.openNetwork(time);` to open the network for devices to join.
+
+***Important: Make sure you are using a good quality USB cable and that you have a reliable power source***
+
+* **LED not blinking:** Check the wiring connection and the IO selection.
+* **Programming Fail:** If the programming/flash procedure fails, try reducing the serial connection speed.
+* **COM port not detected:** Check the USB cable and the USB to Serial driver installation.
+
+If the error persists, you can ask for help at the official [ESP32 forum](https://esp32.com) or see [Contribute](#contribute).
+
+## Contribute
+
+To know how to contribute to this project, see [How to contribute.](https://github.com/espressif/arduino-esp32/blob/master/CONTRIBUTING.rst)
+
+If you have any **feedback** or **issue** to report on this example/library, please open an issue or fix it by creating a new PR. Contributions are more than welcome!
+
+Before creating a new issue, be sure to try Troubleshooting and check if the same issue was already created by someone else.
+
+## Resources
+
+* Official ESP32 Forum: [Link](https://esp32.com)
+* Arduino-ESP32 Official Repository: [espressif/arduino-esp32](https://github.com/espressif/arduino-esp32)
+* ESP32-C6 Datasheet: [Link to datasheet](https://www.espressif.com/sites/default/files/documentation/esp32-c6_datasheet_en.pdf)
+* ESP32-H2 Datasheet: [Link to datasheet](https://www.espressif.com/sites/default/files/documentation/esp32-h2_datasheet_en.pdf)
+* Official ESP-IDF documentation: [ESP-IDF](https://idf.espressif.com)
diff --git a/libraries/Zigbee/examples/Zigbee_Analog_Input_Output/Zigbee_Analog_Input_Output.ino b/libraries/Zigbee/examples/Zigbee_Analog_Input_Output/Zigbee_Analog_Input_Output.ino
new file mode 100644
index 00000000000..e31407cc8be
--- /dev/null
+++ b/libraries/Zigbee/examples/Zigbee_Analog_Input_Output/Zigbee_Analog_Input_Output.ino
@@ -0,0 +1,119 @@
+// Copyright 2025 Espressif Systems (Shanghai) PTE LTD
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+/**
+ * @brief This example demonstrates Zigbee analog input / output device.
+ *
+ * The example demonstrates how to use Zigbee library to create a end device analog device.
+ *
+ * Proper Zigbee mode must be selected in Tools->Zigbee mode
+ * and also the correct partition scheme must be selected in Tools->Partition Scheme.
+ *
+ * Please check the README.md for instructions and more detailed description.
+ *
+ * Created by Jan Procházka (https://github.com/P-R-O-C-H-Y/)
+ * Modified by Pat Clay
+ */
+
+#ifndef ZIGBEE_MODE_ED
+#error "Zigbee end device mode is not selected in Tools->Zigbee mode"
+#endif
+
+#include "Zigbee.h"
+
+/* Zigbee analog device configuration */
+#define ANALOG_DEVICE_ENDPOINT_NUMBER 1
+
+uint8_t analogPin = A0;
+uint8_t button = BOOT_PIN;
+
+ZigbeeAnalog zbAnalogDevice = ZigbeeAnalog(ANALOG_DEVICE_ENDPOINT_NUMBER);
+
+void onAnalogOutputChange(float analog_output) {
+  Serial.printf("Received analog output change: %.1f\r\n", analog_output);
+}
+
+void setup() {
+  Serial.begin(115200);
+  Serial.println("Starting...");
+
+  // Init button switch
+  pinMode(button, INPUT_PULLUP);
+
+  // Set analog resolution to 10 bits
+  analogReadResolution(10);
+
+  // Optional: set Zigbee device name and model
+  zbAnalogDevice.setManufacturerAndModel("Espressif", "ZigbeeAnalogDevice");
+
+  // Add analog clusters to Zigbee Analog according your needs
+  zbAnalogDevice.addAnalogInput();
+  zbAnalogDevice.addAnalogOutput();
+
+  // If analog output cluster is added, set callback function for analog output change
+  zbAnalogDevice.onAnalogOutputChange(onAnalogOutputChange);
+
+  // Add endpoints to Zigbee Core
+  Zigbee.addEndpoint(&zbAnalogDevice);
+
+  Serial.println("Starting Zigbee...");
+  // When all EPs are registered, start Zigbee in End Device mode
+  if (!Zigbee.begin()) {
+    Serial.println("Zigbee failed to start!");
+    Serial.println("Rebooting...");
+    ESP.restart();
+  } else {
+    Serial.println("Zigbee started successfully!");
+  }
+  Serial.println("Connecting to network");
+  while (!Zigbee.connected()) {
+    Serial.print(".");
+    delay(100);
+  }
+  Serial.println("Connected");
+
+  // Optional: Add reporting for analog input
+  zbAnalogDevice.setAnalogInputReporting(0, 30, 10);  // report every 30 seconds if value changes by 10
+}
+
+void loop() {
+  static uint32_t timeCounter = 0;
+
+  // Read ADC value and update the analog value every 2s
+  if (!(timeCounter++ % 20)) {  // delaying for 100ms x 20 = 2s
+    float analog = (float)analogRead(analogPin);
+    Serial.printf("Updating analog input to %.1f\r\n", analog);
+    zbAnalogDevice.setAnalogInput(analog);
+
+    // Analog input supports reporting
+    zbAnalogDevice.reportAnalogInput();
+  }
+
+  // Checking button for factory reset and reporting
+  if (digitalRead(button) == LOW) {  // Push button pressed
+    // Key debounce handling
+    delay(100);
+    int startTime = millis();
+    while (digitalRead(button) == LOW) {
+      delay(50);
+      if ((millis() - startTime) > 3000) {
+        // If key pressed for more than 3secs, factory reset Zigbee and reboot
+        Serial.println("Resetting Zigbee to factory and rebooting in 1s.");
+        delay(1000);
+        Zigbee.factoryReset();
+      }
+    }
+  }
+  delay(100);
+}
diff --git a/libraries/Zigbee/examples/Zigbee_Analog_Input_Output/ci.json b/libraries/Zigbee/examples/Zigbee_Analog_Input_Output/ci.json
new file mode 100644
index 00000000000..ceacc367801
--- /dev/null
+++ b/libraries/Zigbee/examples/Zigbee_Analog_Input_Output/ci.json
@@ -0,0 +1,7 @@
+{
+  "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
+  "requires": [
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
+  ]
+}
diff --git a/libraries/Zigbee/examples/Zigbee_CarbonDioxide_Sensor/ci.json b/libraries/Zigbee/examples/Zigbee_CarbonDioxide_Sensor/ci.json
index 7b7ccef8ed7..ceacc367801 100644
--- a/libraries/Zigbee/examples/Zigbee_CarbonDioxide_Sensor/ci.json
+++ b/libraries/Zigbee/examples/Zigbee_CarbonDioxide_Sensor/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Color_Dimmable_Light/ci.json b/libraries/Zigbee/examples/Zigbee_Color_Dimmable_Light/ci.json
index 7b7ccef8ed7..ceacc367801 100644
--- a/libraries/Zigbee/examples/Zigbee_Color_Dimmable_Light/ci.json
+++ b/libraries/Zigbee/examples/Zigbee_Color_Dimmable_Light/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Color_Dimmer_Switch/ci.json b/libraries/Zigbee/examples/Zigbee_Color_Dimmer_Switch/ci.json
index e79a477da11..15d6190e4ae 100644
--- a/libraries/Zigbee/examples/Zigbee_Color_Dimmer_Switch/ci.json
+++ b/libraries/Zigbee/examples/Zigbee_Color_Dimmer_Switch/ci.json
@@ -1,6 +1,6 @@
 {
   "fqbn_append": "PartitionScheme=zigbee_zczr,ZigbeeMode=zczr",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Contact_Switch/ci.json b/libraries/Zigbee/examples/Zigbee_Contact_Switch/ci.json
index 7b7ccef8ed7..ceacc367801 100644
--- a/libraries/Zigbee/examples/Zigbee_Contact_Switch/ci.json
+++ b/libraries/Zigbee/examples/Zigbee_Contact_Switch/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Dimmable_Light/ci.json b/libraries/Zigbee/examples/Zigbee_Dimmable_Light/ci.json
index 7b7ccef8ed7..ceacc367801 100644
--- a/libraries/Zigbee/examples/Zigbee_Dimmable_Light/ci.json
+++ b/libraries/Zigbee/examples/Zigbee_Dimmable_Light/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Gateway/README.md b/libraries/Zigbee/examples/Zigbee_Gateway/README.md
new file mode 100644
index 00000000000..4156538ccd9
--- /dev/null
+++ b/libraries/Zigbee/examples/Zigbee_Gateway/README.md
@@ -0,0 +1,64 @@
+# Arduino-ESP32 Zigbee Gateway Example
+
+This example shows how to configure Zigbee Gateway device, running on SoCs without native IEEE 802.15.4.
+
+# Supported Targets
+
+Currently, this example supports the following targets.
+
+| Supported Targets | ESP32 | ESP32-S2 | ESP32-S3 | ESP32-C3 |
+| ----------------- | ----- | -------- | -------- | -------- |
+
+## Hardware Required
+
+* One development board (ESP32-H2 or ESP32-C6) acting as Zigbee Radio Co-processor loaded with [ot_rcp example](https://github.com/espressif/esp-idf/tree/master/examples/openthread/ot_rcp).
+* A USB cable for power supply and programming.
+* Choose another board from supported targets as Zigbee coordinator/router and upload the Zigbee_Gateway example.
+
+### Configure the Project
+
+Set the RCP connection (UART) by changing the `GATEWAY_RCP_UART_PORT`, `GATEWAY_RCP_RX_PIN` and `GATEWAY_RCP_TX_PIN` definition.
+
+#### Using Arduino IDE
+
+To get more information about the Espressif boards see [Espressif Development Kits](https://www.espressif.com/en/products/devkits).
+
+* Before Compile/Verify, select the correct board: `Tools -> Board`.
+* Select the Coordinator Zigbee mode: `Tools -> Zigbee mode: Zigbee ZCZR (coordinator/router)`.
+* Select Partition Scheme for Zigbee: `Tools -> Partition Scheme: Zigbee 4MB with spiffs`.
+* Select the COM port: `Tools -> Port: xxx where the `xxx` is the detected COM port.
+* Optional: Set debug level to verbose to see all logs from Zigbee stack: `Tools -> Core Debug Level: Verbose`.
+
+## Troubleshooting
+
+* In the Arduino IDE go to the Tools menu and set `Erase All Flash Before Sketch Upload` to `Enabled`.
+
+By default, the coordinator network is closed after rebooting or flashing new firmware.
+To open the network you have 2 options:
+
+* Open network after reboot by setting `Zigbee.setRebootOpenNetwork(time);` before calling `Zigbee.begin();`.
+* In application you can anytime call `Zigbee.openNetwork(time);` to open the network for devices to join.
+
+***Important: Make sure you are using a good quality USB cable and that you have a reliable power source***
+
+* **LED not blinking:** Check the wiring connection and the IO selection.
+* **Programming Fail:** If the programming/flash procedure fails, try reducing the serial connection speed.
+* **COM port not detected:** Check the USB cable and the USB to Serial driver installation.
+
+If the error persists, you can ask for help at the official [ESP32 forum](https://esp32.com) or see [Contribute](#contribute).
+
+## Contribute
+
+To know how to contribute to this project, see [How to contribute.](https://github.com/espressif/arduino-esp32/blob/master/CONTRIBUTING.rst)
+
+If you have any **feedback** or **issue** to report on this example/library, please open an issue or fix it by creating a new PR. Contributions are more than welcome!
+
+Before creating a new issue, be sure to try Troubleshooting and check if the same issue was already created by someone else.
+
+## Resources
+
+* Official ESP32 Forum: [Link](https://esp32.com)
+* Arduino-ESP32 Official Repository: [espressif/arduino-esp32](https://github.com/espressif/arduino-esp32)
+* ESP32-C6 Datasheet: [Link to datasheet](https://www.espressif.com/sites/default/files/documentation/esp32-c6_datasheet_en.pdf)
+* ESP32-H2 Datasheet: [Link to datasheet](https://www.espressif.com/sites/default/files/documentation/esp32-h2_datasheet_en.pdf)
+* Official ESP-IDF documentation: [ESP-IDF](https://idf.espressif.com)
diff --git a/libraries/Zigbee/examples/Zigbee_Gateway/Zigbee_Gateway.ino b/libraries/Zigbee/examples/Zigbee_Gateway/Zigbee_Gateway.ino
new file mode 100644
index 00000000000..402227b9a3d
--- /dev/null
+++ b/libraries/Zigbee/examples/Zigbee_Gateway/Zigbee_Gateway.ino
@@ -0,0 +1,130 @@
+// Copyright 2025 Espressif Systems (Shanghai) PTE LTD
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+/**
+ * @brief This example demonstrates simple Zigbee Gateway functionality.
+ *
+ * The example demonstrates how to use Zigbee library on ESP32s to create a Zigbee Gateway, updating the time from NTP server.
+ * The Gateway is able to communicate with Zigbee end devices and send/receive data to/from them.
+ * The Gateway is also able to communicate with the cloud or other devices over Wi-Fi / BLE.
+ *
+ * Proper Zigbee mode must be selected in Tools->Zigbee mode->Zigbee ZCZR (coordinator/router)
+ * and also the correct partition scheme must be selected in Tools->Partition Scheme->Zigbee ZCZR
+ *
+ * Please check the README.md for instructions and more detailed description.
+ *
+ * Created by Jan Procházka (https://github.com/P-R-O-C-H-Y/)
+ */
+
+#ifndef ZIGBEE_MODE_ZCZR
+#error "Zigbee coordinator mode is not selected in Tools->Zigbee mode"
+#endif
+
+#include "Zigbee.h"
+#include <WiFi.h>
+#include "time.h"
+#include "esp_sntp.h"
+
+/* Zigbee gateway configuration */
+#define GATEWAY_ENDPOINT_NUMBER 1
+#define GATEWAY_RCP_UART_PORT   UART_NUM_1  // UART 0 is used for Serial communication
+#define GATEWAY_RCP_RX_PIN      4
+#define GATEWAY_RCP_TX_PIN      5
+
+ZigbeeGateway zbGateway = ZigbeeGateway(GATEWAY_ENDPOINT_NUMBER);
+
+/* Wi-Fi credentials */
+const char *ssid = "your-ssid";
+const char *password = "your-password";
+
+/* NTP server configuration */
+const char *ntpServer1 = "pool.ntp.org";
+const char *ntpServer2 = "time.nist.gov";
+const long gmtOffset_sec = 3600;
+const int daylightOffset_sec = 3600;
+const char *time_zone = "CET-1CEST,M3.5.0,M10.5.0/3";  // TimeZone rule for Europe/Rome including daylight adjustment rules (optional)
+
+/* Time structure */
+struct tm timeinfo;
+
+/********************* Arduino functions **************************/
+void setup() {
+  Serial.begin(115200);
+
+  // Initialize Wi-Fi and connect to AP
+  WiFi.begin(ssid, password);
+  esp_sntp_servermode_dhcp(1);  // (optional)
+
+  Serial.print("Connecting to WiFi");
+
+  while (WiFi.status() != WL_CONNECTED) {
+    delay(500);
+    Serial.print(".");
+  }
+  Serial.println("WiFi connected");
+
+  // Initialize Zigbee and Begin Zigbee stack
+  // Optional: set Zigbee device name and model
+  zbGateway.setManufacturerAndModel("Espressif", "ZigbeeGateway");
+  zbGateway.addTimeCluster(timeinfo, gmtOffset_sec);
+
+  // Add endpoint to Zigbee Core
+  Serial.println("Adding Zigbee Gateway endpoint");
+  Zigbee.addEndpoint(&zbGateway);
+
+  // Optional: Open network for 180 seconds after boot
+  Zigbee.setRebootOpenNetwork(180);
+
+  // Set custom radio configuration for RCP communication
+  esp_zb_radio_config_t radio_config = ZIGBEE_DEFAULT_UART_RCP_RADIO_CONFIG();
+  radio_config.radio_uart_config.port = GATEWAY_RCP_UART_PORT;
+  radio_config.radio_uart_config.rx_pin = (gpio_num_t)GATEWAY_RCP_RX_PIN;
+  radio_config.radio_uart_config.tx_pin = (gpio_num_t)GATEWAY_RCP_TX_PIN;
+
+  Zigbee.setRadioConfig(radio_config);
+
+  // When all EPs are registered, start Zigbee with ZIGBEE_COORDINATOR or ZIGBEE_ROUTER mode
+  if (!Zigbee.begin(ZIGBEE_COORDINATOR)) {
+    Serial.println("Zigbee failed to start!");
+    Serial.println("Rebooting...");
+    ESP.restart();
+  }
+
+  // set notification call-back function
+  sntp_set_time_sync_notification_cb(timeavailable);
+  sntp_set_sync_interval(30000);  // sync every 30 seconds
+
+  // config time zone and NTP servers
+  configTime(gmtOffset_sec, daylightOffset_sec, ntpServer1, ntpServer2);
+}
+
+void loop() {
+  // Nothing to do here in this example
+}
+
+void printLocalTime() {
+  if (!getLocalTime(&timeinfo)) {
+    Serial.println("No time available (yet)");
+    return;
+  }
+  Serial.println(&timeinfo, "%A, %B %d %Y %H:%M:%S");
+  zbGateway.setTime(timeinfo);
+  Serial.println("Time updated in Zigbee Gateway");
+}
+
+// Callback function (gets called when time adjusts via NTP)
+void timeavailable(struct timeval *t) {
+  Serial.println("Got time adjustment from NTP!");
+  printLocalTime();
+}
diff --git a/libraries/Zigbee/examples/Zigbee_Gateway/ci.json b/libraries/Zigbee/examples/Zigbee_Gateway/ci.json
new file mode 100644
index 00000000000..23e1c59d1da
--- /dev/null
+++ b/libraries/Zigbee/examples/Zigbee_Gateway/ci.json
@@ -0,0 +1,10 @@
+{
+  "fqbn_append": "PartitionScheme=zigbee_zczr_8MB,ZigbeeMode=zczr",
+  "requires": [
+    "CONFIG_ZB_ENABLED=y"
+  ],
+  "targets": {
+    "esp32c6": false,
+    "esp32h2": false
+  }
+}
diff --git a/libraries/Zigbee/examples/Zigbee_Illuminance_Sensor/README.md b/libraries/Zigbee/examples/Zigbee_Illuminance_Sensor/README.md
new file mode 100644
index 00000000000..fe723696d5a
--- /dev/null
+++ b/libraries/Zigbee/examples/Zigbee_Illuminance_Sensor/README.md
@@ -0,0 +1,78 @@
+# Arduino-ESP32 Zigbee Illuminance Sensor Example
+
+This example demonstrates how to use the Zigbee library to create an end device illuminance sensor and use it as a Home Automation (HA) extended illuminance sensor.
+
+# Supported Targets
+
+Currently, this example supports the following targets.
+
+| Supported Targets | ESP32-C6 | ESP32-H2 |
+| ----------------- | -------- | -------- |
+
+## Illuminance Sensor Functions
+
+1. Initialize a Zigbee illuminance sensor.
+2. Measure illuminance value.
+3. Report the measured value to the Zigbee network.
+
+## Hardware Required
+
+* ESP32-H2 or ESP32-C6 development board
+* A USB cable for power supply and programming
+* Some kind of light sensor, such as a photoresistor
+
+### Configure the Project
+
+In this example the raw analog value of a light sensor is used to calculate illuminance.
+Alter the calculation according to your use case and calibrate it to receive correct lux values.
+Set the illuminance sensor GPIO by changing the `illuminance_sensor_pin` variable to the pin to the pin to which your sensor is connected.
+Set the button GPIO by changing the `button` variable. By default, it's the pin `BOOT_PIN` (BOOT button on ESP32-C6 and ESP32-H2).
+
+#### Using Arduino IDE
+
+To get more information about the Espressif boards see [Espressif Development Kits](https://www.espressif.com/en/products/devkits).
+
+* Before Compile/Verify, select the correct board: `Tools -> Board`.
+* Select the End device Zigbee mode: `Tools -> Zigbee mode: Zigbee ED (end device)`
+* Select Partition Scheme for Zigbee: `Tools -> Partition Scheme: Zigbee 4MB with spiffs`
+* Enable USB CDC to be able to use the serial monitor: `Tools -> USB CDC On Boot: Enabled`
+* Select the COM port: `Tools -> Port: xxx` where the `xxx` is the detected COM port.
+* Optional: Set debug level to verbose to see all logs from Zigbee stack: `Tools -> Core Debug Level: Verbose`.
+
+## Troubleshooting
+
+If the End device flashed with this example is not connecting to the coordinator, erase the flash of the End device before flashing the example to the board. It is recommended to do this if you re-flash the coordinator.
+You can do the following:
+
+* In the Arduino IDE go to the Tools menu and set `Erase All Flash Before Sketch Upload` to `Enabled`.
+* Add to the sketch `Zigbee.factoryReset();` to reset the device and Zigbee stack.
+
+By default, the coordinator network is closed after rebooting or flashing new firmware.
+To open the network you have 2 options:
+
+* Open network after reboot by setting `Zigbee.setRebootOpenNetwork(time);` before calling `Zigbee.begin();`.
+* In application you can anytime call `Zigbee.openNetwork(time);` to open the network for devices to join.
+
+***Important: Make sure that you are using a good quality USB cable with data lines and that you have a reliable power source***
+
+* **LED not blinking:** Check the wiring connection and the IO selection.
+* **Programming Fail:** If the programming/flash procedure fails, try reducing the serial connection speed.
+* **COM port not detected:** Check the USB cable and the USB to Serial driver installation.
+
+If the error persists, you can ask for help at the official [ESP32 forum](https://esp32.com) or see [Contribute](#contribute).
+
+## Contribute
+
+To know how to contribute to this project, see [How to contribute.](https://github.com/espressif/arduino-esp32/blob/master/CONTRIBUTING.rst)
+
+If you have any **feedback** or **issue** to report on this example/library, please open an issue or fix it by creating a new PR. Contributions are more than welcome!
+
+Before creating a new issue, be sure to try Troubleshooting and check if the same issue was already created by someone else.
+
+## Resources
+
+* Official ESP32 Forum: [Link](https://esp32.com)
+* Arduino-ESP32 Official Repository: [espressif/arduino-esp32](https://github.com/espressif/arduino-esp32)
+* ESP32-C6 Datasheet: [Link to datasheet](https://www.espressif.com/sites/default/files/documentation/esp32-c6_datasheet_en.pdf)
+* ESP32-H2 Datasheet: [Link to datasheet](https://www.espressif.com/sites/default/files/documentation/esp32-h2_datasheet_en.pdf)
+* Official ESP-IDF documentation: [ESP-IDF](https://idf.espressif.com)
diff --git a/libraries/Zigbee/examples/Zigbee_Illuminance_Sensor/Zigbee_Illuminance_Sensor.ino b/libraries/Zigbee/examples/Zigbee_Illuminance_Sensor/Zigbee_Illuminance_Sensor.ino
new file mode 100644
index 00000000000..bbb2cba569f
--- /dev/null
+++ b/libraries/Zigbee/examples/Zigbee_Illuminance_Sensor/Zigbee_Illuminance_Sensor.ino
@@ -0,0 +1,141 @@
+// Copyright 2025 Espressif Systems (Shanghai) PTE LTD
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+/**
+ * @brief This example demonstrates Zigbee illuminance sensor.
+ *
+ * The example demonstrates how to use Zigbee library to create a end device illuminance sensor.
+ * The illuminance sensor is a Zigbee end device, which is controlled by a Zigbee coordinator.
+ *
+ * Proper Zigbee mode must be selected in Tools->Zigbee mode
+ * and also the correct partition scheme must be selected in Tools->Partition Scheme.
+ *
+ * Please check the README.md for instructions and more detailed description.
+ *
+ * Created by MikaFromTheRoof (https://github.com/MikaFromTheRoof)
+ */
+
+#ifndef ZIGBEE_MODE_ED
+#error "Zigbee end device mode is not selected in Tools->Zigbee mode"
+#endif
+
+#include "Zigbee.h"
+
+#define ZIGBEE_ILLUMINANCE_SENSOR_ENDPOINT 9
+uint8_t button = BOOT_PIN;
+uint8_t illuminance_sensor_pin = 6;  // Insert the analog pin to which the sensor (e.g. photoresistor) is connected
+
+ZigbeeIlluminanceSensor zbIlluminanceSensor = ZigbeeIlluminanceSensor(ZIGBEE_ILLUMINANCE_SENSOR_ENDPOINT);
+
+/********************* Illuminance sensor **************************/
+static void illuminance_sensor_value_update(void *arg) {
+  for (;;) {
+    // read the raw analog value from the sensor
+    int lsens_analog_raw = analogRead(illuminance_sensor_pin);
+    Serial.printf("[Illuminance Sensor] raw analog value: %d\r\n", lsens_analog_raw);
+
+    // conversion into zigbee raw illuminance value (typically between 0 in darkness and 50000 in direct sunlight)
+    // depends on the value range of the raw analog sensor values and will need calibration for correct lux values
+    // for demonstration purpose map the 12-bit ADC value (0-4095) to Zigbee illuminance range (0-50000)
+    int lsens_illuminance_raw = map(lsens_analog_raw, 0, 4095, 0, 50000);
+    Serial.printf("[Illuminance Sensor] raw illuminance value: %d\r\n", lsens_illuminance_raw);
+
+    // according to zigbee documentation the formular 10^(lsens_illuminance_raw/10000)-1 can be used to calculate lux value from raw illuminance value
+    // Note: Zigbee2MQTT seems to be using the formular 10^(lsens_illuminance_raw/10000) instead (without -1)
+    int lsens_illuminance_lux = round(pow(10, (lsens_illuminance_raw / 10000.0)) - 1);
+    Serial.printf("[Illuminance Sensor] lux value: %d lux\r\n", lsens_illuminance_lux);
+
+    // Update illuminance in illuminance sensor EP
+    zbIlluminanceSensor.setIlluminance(lsens_illuminance_raw);  // use raw illuminance here!
+
+    delay(1000);  // reduce delay (in ms), if you want your device to react more quickly to changes in illuminance
+  }
+}
+
+/********************* Arduino functions **************************/
+void setup() {
+  Serial.begin(115200);
+
+  // Optional: configure analog input
+  analogSetAttenuation(ADC_11db);  // set analog to digital converter (ADC) attenuation to 11 dB (up to ~3.3V input)
+  analogReadResolution(12);        // set analog read resolution to 12 bits (value range from 0 to 4095), 12 is default
+
+  // Init button for factory reset
+  pinMode(button, INPUT_PULLUP);
+
+  // Optional: Set Zigbee device name and model
+  zbIlluminanceSensor.setManufacturerAndModel("Espressif", "ZigbeeIlluminanceSensor");
+
+  // Optional: Set power source (choose between ZB_POWER_SOURCE_MAINS and ZB_POWER_SOURCE_BATTERY), defaults to unknown
+  zbIlluminanceSensor.setPowerSource(ZB_POWER_SOURCE_MAINS);
+
+  // Set minimum and maximum for raw illuminance value (0 min and 50000 max equals to 0 lux - 100,000 lux)
+  zbIlluminanceSensor.setMinMaxValue(0, 50000);
+
+  // Optional: Set tolerance for raw illuminance value
+  zbIlluminanceSensor.setTolerance(1);
+
+  // Add endpoint to Zigbee Core
+  Serial.println("Adding Zigbee illuminance sensor endpoint to Zigbee Core");
+  Zigbee.addEndpoint(&zbIlluminanceSensor);
+
+  Serial.println("Starting Zigbee...");
+  // When all EPs are registered, start Zigbee in End Device mode
+  if (!Zigbee.begin()) {
+    Serial.println("Zigbee failed to start!");
+    Serial.println("Rebooting...");
+    ESP.restart();
+  } else {
+    Serial.println("Zigbee started successfully!");
+  }
+  Serial.println("Connecting to network");
+  while (!Zigbee.connected()) {
+    Serial.print(".");
+    delay(100);
+  }
+  Serial.println();
+
+  // Start illuminance sensor reading task
+  xTaskCreate(illuminance_sensor_value_update, "illuminance_sensor_update", 2048, NULL, 10, NULL);
+
+  // Set reporting schedule for illuminance value measurement in seconds, must be called after Zigbee.begin()
+  // min_interval and max_interval in seconds, delta
+  // if min = 1 and max = 0, delta = 1000, reporting is sent when raw illuminance value changes by 1000, but at most once per second
+  // if min = 0 and max = 10, delta = 1000, reporting is sent every 10 seconds or if raw illuminance value changes by 1000
+  // if min = 0, max = 10 and delta = 0, reporting is sent every 10 seconds regardless of illuminance change
+  // Note: On pairing with Zigbee Home Automation or Zigbee2MQTT the reporting schedule will most likely be overwritten with their default settings
+  zbIlluminanceSensor.setReporting(1, 0, 1000);
+}
+
+/********************* Main loop **************************/
+void loop() {
+  // Checking button for factory reset
+  if (digitalRead(button) == LOW) {  // Push button pressed
+    // Key debounce handling
+    delay(100);
+    int startTime = millis();
+    while (digitalRead(button) == LOW) {
+      delay(50);
+      if ((millis() - startTime) > 3000) {
+        // If key pressed for more than 3 secs, factory reset Zigbee and reboot
+        Serial.println("Resetting Zigbee to factory and rebooting in 1s");
+        delay(1000);
+        Zigbee.factoryReset();
+      }
+    }
+    // force report of illuminance when button is pressed
+    zbIlluminanceSensor.report();
+  }
+  delay(100);
+}
diff --git a/libraries/Zigbee/examples/Zigbee_Illuminance_Sensor/ci.json b/libraries/Zigbee/examples/Zigbee_Illuminance_Sensor/ci.json
new file mode 100644
index 00000000000..ceacc367801
--- /dev/null
+++ b/libraries/Zigbee/examples/Zigbee_Illuminance_Sensor/ci.json
@@ -0,0 +1,7 @@
+{
+  "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
+  "requires": [
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
+  ]
+}
diff --git a/libraries/Zigbee/examples/Zigbee_OTA_Client/ci.json b/libraries/Zigbee/examples/Zigbee_OTA_Client/ci.json
index 7b7ccef8ed7..ceacc367801 100644
--- a/libraries/Zigbee/examples/Zigbee_OTA_Client/ci.json
+++ b/libraries/Zigbee/examples/Zigbee_OTA_Client/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Occupancy_Sensor/ci.json b/libraries/Zigbee/examples/Zigbee_Occupancy_Sensor/ci.json
index 7b7ccef8ed7..ceacc367801 100644
--- a/libraries/Zigbee/examples/Zigbee_Occupancy_Sensor/ci.json
+++ b/libraries/Zigbee/examples/Zigbee_Occupancy_Sensor/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_On_Off_Light/ci.json b/libraries/Zigbee/examples/Zigbee_On_Off_Light/ci.json
index 7b7ccef8ed7..ceacc367801 100644
--- a/libraries/Zigbee/examples/Zigbee_On_Off_Light/ci.json
+++ b/libraries/Zigbee/examples/Zigbee_On_Off_Light/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_On_Off_Switch/ci.json b/libraries/Zigbee/examples/Zigbee_On_Off_Switch/ci.json
index e79a477da11..15d6190e4ae 100644
--- a/libraries/Zigbee/examples/Zigbee_On_Off_Switch/ci.json
+++ b/libraries/Zigbee/examples/Zigbee_On_Off_Switch/ci.json
@@ -1,6 +1,6 @@
 {
   "fqbn_append": "PartitionScheme=zigbee_zczr,ZigbeeMode=zczr",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Pressure_Flow_Sensor/ci.json b/libraries/Zigbee/examples/Zigbee_Pressure_Flow_Sensor/ci.json
index 7b7ccef8ed7..ceacc367801 100644
--- a/libraries/Zigbee/examples/Zigbee_Pressure_Flow_Sensor/ci.json
+++ b/libraries/Zigbee/examples/Zigbee_Pressure_Flow_Sensor/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Range_Extender/README.md b/libraries/Zigbee/examples/Zigbee_Range_Extender/README.md
new file mode 100644
index 00000000000..198dd85b6ee
--- /dev/null
+++ b/libraries/Zigbee/examples/Zigbee_Range_Extender/README.md
@@ -0,0 +1,68 @@
+# Arduino-ESP32 Zigbee Range Extender (Router) Example
+
+This example shows how to configure the Zigbee Router device and use it as a Home Automation (HA) network range extender.
+
+To see if the communication with your Zigbee network works, use the Serial monitor and watch for output there.
+
+# Supported Targets
+
+Currently, this example supports the following targets.
+
+| Supported Targets | ESP32-C6 | ESP32-H2 |
+| ----------------- | -------- | -------- |
+
+## Hardware Required
+
+* A USB cable for power supply and programming
+* Board (ESP32-H2 or ESP32-C6) as Zigbee router device and upload the Zigbee_Range_Extender example
+* Zigbee network / coordinator (Other board with switch examples or Zigbee2mqtt or ZigbeeHomeAssistant like application)
+
+### Configure the Project
+
+#### Using Arduino IDE
+
+To get more information about the Espressif boards see [Espressif Development Kits](https://www.espressif.com/en/products/devkits).
+
+* Before Compile/Verify, select the correct board: `Tools -> Board`.
+* Select the Coordinator/Router device Zigbee mode: `Tools -> Zigbee mode: Zigbee ZCZR (coordinator/router)`
+* Select Partition Scheme for Zigbee: `Tools -> Partition Scheme: Zigbee 4MB with spiffs` (select correct size)
+* Select the COM port: `Tools -> Port: xxx` where the `xxx` is the detected COM port.
+* Optional: Set debug level to verbose to see all logs from Zigbee stack: `Tools -> Core Debug Level: Verbose`.
+
+## Troubleshooting
+
+If the Router device flashed with this example is not connecting to the coordinator, erase the flash of the Router device before flashing the example to the board. It is recommended to do this if you re-flash the coordinator.
+You can do the following:
+
+* In the Arduino IDE go to the Tools menu and set `Erase All Flash Before Sketch Upload` to `Enabled`.
+* Add to the sketch `Zigbee.factoryReset();` to reset the device and Zigbee stack.
+
+By default, the coordinator network is closed after rebooting or flashing new firmware.
+To open the network you have 2 options:
+
+* Open network after reboot by setting `Zigbee.setRebootOpenNetwork(time);` before calling `Zigbee.begin();`.
+* In application you can anytime call `Zigbee.openNetwork(time);` to open the network for devices to join.
+
+***Important: Make sure you are using a good quality USB cable and that you have a reliable power source***
+
+* **LED not blinking:** Check the wiring connection and the IO selection.
+* **Programming Fail:** If the programming/flash procedure fails, try reducing the serial connection speed.
+* **COM port not detected:** Check the USB cable and the USB to Serial driver installation.
+
+If the error persists, you can ask for help at the official [ESP32 forum](https://esp32.com) or see [Contribute](#contribute).
+
+## Contribute
+
+To know how to contribute to this project, see [How to contribute.](https://github.com/espressif/arduino-esp32/blob/master/CONTRIBUTING.rst)
+
+If you have any **feedback** or **issue** to report on this example/library, please open an issue or fix it by creating a new PR. Contributions are more than welcome!
+
+Before creating a new issue, be sure to try Troubleshooting and check if the same issue was already created by someone else.
+
+## Resources
+
+* Official ESP32 Forum: [Link](https://esp32.com)
+* Arduino-ESP32 Official Repository: [espressif/arduino-esp32](https://github.com/espressif/arduino-esp32)
+* ESP32-C6 Datasheet: [Link to datasheet](https://www.espressif.com/sites/default/files/documentation/esp32-c6_datasheet_en.pdf)
+* ESP32-H2 Datasheet: [Link to datasheet](https://www.espressif.com/sites/default/files/documentation/esp32-h2_datasheet_en.pdf)
+* Official ESP-IDF documentation: [ESP-IDF](https://idf.espressif.com)
diff --git a/libraries/Zigbee/examples/Zigbee_Range_Extender/Zigbee_Range_Extender.ino b/libraries/Zigbee/examples/Zigbee_Range_Extender/Zigbee_Range_Extender.ino
new file mode 100644
index 00000000000..a1ba90fbaf6
--- /dev/null
+++ b/libraries/Zigbee/examples/Zigbee_Range_Extender/Zigbee_Range_Extender.ino
@@ -0,0 +1,120 @@
+// Copyright 2025 Espressif Systems (Shanghai) PTE LTD
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+/**
+ * @brief This example demonstrates simple Zigbee Range Extender (router).
+ *
+ * The example demonstrates how to use Zigbee library to create a Zigbee network ragbe extender (router).
+ *
+ * Proper Zigbee mode must be selected in Tools->Zigbee mode
+ * and also the correct partition scheme must be selected in Tools->Partition Scheme.
+ *
+ * Please check the README.md for instructions and more detailed description.
+ *
+ * Created by Jan Procházka (https://github.com/P-R-O-C-H-Y/)
+ */
+
+#ifndef ZIGBEE_MODE_ZCZR
+#error "Zigbee coordinator/router mode is not selected in Tools->Zigbee mode"
+#endif
+
+#include "Zigbee.h"
+
+/* Zigbee light bulb configuration */
+#define USE_CUSTOM_ZIGBEE_CONFIG 1
+#define ZIGBEE_EXTENDER_ENDPOINT 1
+
+#ifndef LED_BUILTIN
+#define LED_BUILTIN 4
+#endif
+
+uint8_t led = LED_BUILTIN;
+uint8_t button = BOOT_PIN;
+
+ZigbeeRangeExtender zbExtender = ZigbeeRangeExtender(ZIGBEE_EXTENDER_ENDPOINT);
+
+/************************** Identify ******************************/
+// Create a task on identify call to handle the identify function
+void identify(uint16_t time) {
+  static uint8_t blink = 1;
+  log_d("Identify called for %d seconds", time);
+  if (time == 0) {
+    digitalWrite(led, LOW);
+    return;
+  }
+  digitalWrite(led, blink);
+  blink = !blink;
+}
+
+/********************* Arduino functions **************************/
+void setup() {
+  Serial.begin(115200);
+
+  // Init LED and turn it OFF (if LED_PIN == RGB_BUILTIN, the rgbLedWrite() will be used under the hood)
+  pinMode(led, OUTPUT);
+  digitalWrite(led, LOW);
+
+  // Init button for factory reset
+  pinMode(button, INPUT_PULLUP);
+
+  // Optional: Set callback function for device identify
+  zbExtender.onIdentify(identify);
+
+  // Optional: Set Zigbee device name and model
+  zbExtender.setManufacturerAndModel("Espressif", "ZigbeeRangeExtender");
+
+  // Add endpoint to Zigbee Core
+  Serial.println("Adding Zigbee Extender endpoint to Zigbee Core");
+  Zigbee.addEndpoint(&zbExtender);
+
+#if USE_CUSTOM_ZIGBEE_CONFIG
+  // Optional: Create a custom Zigbee configuration for Zigbee Extender
+  esp_zb_cfg_t zigbeeConfig = ZIGBEE_DEFAULT_ROUTER_CONFIG();
+  zigbeeConfig.nwk_cfg.zczr_cfg.max_children = 20;  // 10 is default
+
+  // When all EPs are registered, start Zigbee with custom config
+  if (!Zigbee.begin(&zigbeeConfig)) {
+#else
+  // When all EPs are registered, start Zigbee as ROUTER device
+  if (!Zigbee.begin(ZIGBEE_ROUTER)) {
+#endif
+    Serial.println("Zigbee failed to start!");
+    Serial.println("Rebooting...");
+    ESP.restart();
+  }
+  Serial.println("Connecting to network");
+  while (!Zigbee.connected()) {
+    Serial.print(".");
+    delay(100);
+  }
+  Serial.println();
+}
+
+void loop() {
+  // Checking button for factory reset
+  if (digitalRead(button) == LOW) {  // Push button pressed
+    // Key debounce handling
+    delay(100);
+    int startTime = millis();
+    while (digitalRead(button) == LOW) {
+      delay(50);
+      if ((millis() - startTime) > 3000) {
+        // If key pressed for more than 3secs, factory reset Zigbee and reboot
+        Serial.println("Resetting Zigbee to factory and rebooting in 1s.");
+        delay(1000);
+        Zigbee.factoryReset();
+      }
+    }
+  }
+}
diff --git a/libraries/Zigbee/examples/Zigbee_Range_Extender/ci.json b/libraries/Zigbee/examples/Zigbee_Range_Extender/ci.json
new file mode 100644
index 00000000000..15d6190e4ae
--- /dev/null
+++ b/libraries/Zigbee/examples/Zigbee_Range_Extender/ci.json
@@ -0,0 +1,6 @@
+{
+  "fqbn_append": "PartitionScheme=zigbee_zczr,ZigbeeMode=zczr",
+  "requires": [
+    "CONFIG_ZB_ENABLED=y"
+  ]
+}
diff --git a/libraries/Zigbee/examples/Zigbee_Scan_Networks/ci.json b/libraries/Zigbee/examples/Zigbee_Scan_Networks/ci.json
index 7b7ccef8ed7..ceacc367801 100644
--- a/libraries/Zigbee/examples/Zigbee_Scan_Networks/ci.json
+++ b/libraries/Zigbee/examples/Zigbee_Scan_Networks/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Temp_Hum_Sensor_Sleepy/Zigbee_Temp_Hum_Sensor_Sleepy.ino b/libraries/Zigbee/examples/Zigbee_Temp_Hum_Sensor_Sleepy/Zigbee_Temp_Hum_Sensor_Sleepy.ino
index 60bd784cca9..3eefd973dd2 100644
--- a/libraries/Zigbee/examples/Zigbee_Temp_Hum_Sensor_Sleepy/Zigbee_Temp_Hum_Sensor_Sleepy.ino
+++ b/libraries/Zigbee/examples/Zigbee_Temp_Hum_Sensor_Sleepy/Zigbee_Temp_Hum_Sensor_Sleepy.ino
@@ -77,7 +77,7 @@ void setup() {
   esp_sleep_enable_timer_wakeup(TIME_TO_SLEEP * uS_TO_S_FACTOR);
 
   // Optional: set Zigbee device name and model
-  zbTempSensor.setManufacturerAndModel("Espressif", "SleepyZigbeeTempSensorTest");
+  zbTempSensor.setManufacturerAndModel("Espressif", "SleepyZigbeeTempSensor");
 
   // Set minimum and maximum temperature measurement value (10-50°C is default range for chip temperature measurement)
   zbTempSensor.setMinMaxValue(10, 50);
@@ -99,11 +99,15 @@ void setup() {
   esp_zb_cfg_t zigbeeConfig = ZIGBEE_DEFAULT_ED_CONFIG();
   zigbeeConfig.nwk_cfg.zed_cfg.keep_alive = 10000;
 
+  // For battery powered devices, it can be better to set timeout for Zigbee Begin to lower value to save battery
+  // If the timeout has been reached, the network channel mask will be reset and the device will try to connect again after reset (scanning all channels)
+  Zigbee.setTimeout(10000);  // Set timeout for Zigbee Begin to 10s (default is 30s)
+
   // When all EPs are registered, start Zigbee in End Device mode
   if (!Zigbee.begin(&zigbeeConfig, false)) {
     Serial.println("Zigbee failed to start!");
     Serial.println("Rebooting...");
-    ESP.restart();
+    ESP.restart();  // If Zigbee failed to start, reboot the device and try again
   }
   Serial.println("Connecting to network");
   while (!Zigbee.connected()) {
@@ -125,11 +129,15 @@ void loop() {
     int startTime = millis();
     while (digitalRead(button) == LOW) {
       delay(50);
-      if ((millis() - startTime) > 3000) {
-        // If key pressed for more than 3secs, factory reset Zigbee and reboot
+      if ((millis() - startTime) > 10000) {
+        // If key pressed for more than 10secs, factory reset Zigbee and reboot
         Serial.println("Resetting Zigbee to factory and rebooting in 1s.");
         delay(1000);
-        Zigbee.factoryReset();
+        // Optional set reset in factoryReset to false, to not restart device after erasing nvram, but set it to endless sleep manually instead
+        Zigbee.factoryReset(false);
+        Serial.println("Going to endless sleep, press RESET button or power off/on the device to wake up");
+        esp_sleep_disable_wakeup_source(ESP_SLEEP_WAKEUP_TIMER);
+        esp_deep_sleep_start();
       }
     }
   }
diff --git a/libraries/Zigbee/examples/Zigbee_Temp_Hum_Sensor_Sleepy/ci.json b/libraries/Zigbee/examples/Zigbee_Temp_Hum_Sensor_Sleepy/ci.json
index 7b7ccef8ed7..ceacc367801 100644
--- a/libraries/Zigbee/examples/Zigbee_Temp_Hum_Sensor_Sleepy/ci.json
+++ b/libraries/Zigbee/examples/Zigbee_Temp_Hum_Sensor_Sleepy/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Temperature_Sensor/ci.json b/libraries/Zigbee/examples/Zigbee_Temperature_Sensor/ci.json
index 7b7ccef8ed7..ceacc367801 100644
--- a/libraries/Zigbee/examples/Zigbee_Temperature_Sensor/ci.json
+++ b/libraries/Zigbee/examples/Zigbee_Temperature_Sensor/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Thermostat/ci.json b/libraries/Zigbee/examples/Zigbee_Thermostat/ci.json
index e79a477da11..15d6190e4ae 100644
--- a/libraries/Zigbee/examples/Zigbee_Thermostat/ci.json
+++ b/libraries/Zigbee/examples/Zigbee_Thermostat/ci.json
@@ -1,6 +1,6 @@
 {
   "fqbn_append": "PartitionScheme=zigbee_zczr,ZigbeeMode=zczr",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Vibration_Sensor/ci.json b/libraries/Zigbee/examples/Zigbee_Vibration_Sensor/ci.json
index 7b7ccef8ed7..ceacc367801 100644
--- a/libraries/Zigbee/examples/Zigbee_Vibration_Sensor/ci.json
+++ b/libraries/Zigbee/examples/Zigbee_Vibration_Sensor/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Wind_Speed_Sensor/README.md b/libraries/Zigbee/examples/Zigbee_Wind_Speed_Sensor/README.md
new file mode 100644
index 00000000000..826c7666e6b
--- /dev/null
+++ b/libraries/Zigbee/examples/Zigbee_Wind_Speed_Sensor/README.md
@@ -0,0 +1,60 @@
+# Zigbee Wind Speed Sensor Integration with HomeAssistant ZHA
+
+This guide provides a workaround for integrating a Zigbee Wind Speed Sensor with HomeAssistant using the ZHA integration. Since the wind speed cluster is not natively supported, we will use the ZHA Toolkit from HACS to read the wind speed attribute and store it in a helper variable.
+## Alternative Option: Creating a Custom Quirk
+
+For advanced users, a more robust solution is to create a custom quirk for your Zigbee Wind Speed Sensor. This approach involves writing a custom device handler that directly supports the wind speed cluster, providing a more seamless integration with HomeAssistant.
+
+Creating a custom quirk can be complex and requires familiarity with Python and the Zigbee protocol. However, it offers greater flexibility and control over your device's behavior.
+
+For more information and guidance on creating custom quirks, visit the [ZHA Device Handlers repository](https://github.com/zigpy/zha-device-handlers/).
+
+## Prerequisites
+
+- HomeAssistant installed and running
+- Zigbee Wind Speed Sensor paired with HomeAssistant ZHA
+- HACS (Home Assistant Community Store) installed. For more information, visit [HACS](https://hacs.xyz)
+
+## Steps
+
+### 1. Install ZHA Toolkit
+
+1. Open HomeAssistant.
+2. Navigate to HACS > Integrations.
+3. Search for "ZHA Toolkit - Service for advanced Zigbee Usage" and install it. For more information, visit the [ZHA Toolkit repository](https://github.com/mdeweerd/zha-toolkit).
+4. Restart HomeAssistant to apply changes.
+
+### 2. Create a Helper Variable
+
+1. Go to Configuration -> Devices & Services -> Helpers.
+2. Click on "Add Helper" and select "Number".
+3. Name the helper (e.g., `wind_speed`), set the minimum and maximum values, and save it.
+
+### 3. Create an Automation
+
+1. Go to Configuration > Automations & Scenes.
+2. Click on "Add Automation" and choose "Start with an empty automation".
+3. Set a name for the automation (e.g., `Read Wind Speed`).
+4. Add a trigger:
+    - Trigger Type: Time Pattern
+    - Every: 30 seconds
+5. Add an action (Then do):
+    - Action Type: ZHA Toolkit: Read Attribute
+    - Setup the action:
+      ```yaml
+        action: zha_toolkit.attr_read
+        metadata: {}
+        data:
+            ieee: f0:f5:bd:ff:fe:0e:61:30 #set device IEEE address
+            endpoint: 10 #set windspeed device endpoint
+            cluster: 1035 #use this windspeed cluster
+            attribute: 0 #read measurement value
+            state_id: input_number.wind_speed #save to created helper variable
+            state_value_template: value/100 #use correct value format (convert u16 to float)
+      ```
+6. Save the automation.
+
+## Conclusion
+
+By following these steps, you can successfully integrate your Zigbee Wind Speed Sensor with HomeAssistant using the ZHA integration and ZHA Toolkit. The wind speed readings will be updated every 30 seconds and stored in the helper variable for use in your HomeAssistant setup.
+The helper variable `wind_speed` is now an entity in HomeAssistant. You can use this entity to display the wind speed on your dashboard or in other automations.
diff --git a/libraries/Zigbee/examples/Zigbee_Wind_Speed_Sensor/Zigbee_Wind_Speed_Sensor.ino b/libraries/Zigbee/examples/Zigbee_Wind_Speed_Sensor/Zigbee_Wind_Speed_Sensor.ino
new file mode 100644
index 00000000000..1c24df9a091
--- /dev/null
+++ b/libraries/Zigbee/examples/Zigbee_Wind_Speed_Sensor/Zigbee_Wind_Speed_Sensor.ino
@@ -0,0 +1,119 @@
+// Copyright 2024 Espressif Systems (Shanghai) PTE LTD
+//
+// Licensed under the Apache License, Version 2.0 (the "License");
+// you may not use this file except in compliance with the License.
+// You may obtain a copy of the License at
+//
+//     http://www.apache.org/licenses/LICENSE-2.0
+//
+// Unless required by applicable law or agreed to in writing, software
+// distributed under the License is distributed on an "AS IS" BASIS,
+// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+// See the License for the specific language governing permissions and
+// limitations under the License.
+
+/**
+ * @brief This example demonstrates Zigbee windspeed sensor.
+ *
+ * The example demonstrates how to use Zigbee library to create a end device wind speed sensor.
+ * The wind speed sensor is a Zigbee end device, which is controlled by a Zigbee coordinator.
+ *
+ * Proper Zigbee mode must be selected in Tools->Zigbee mode
+ * and also the correct partition scheme must be selected in Tools->Partition Scheme.
+ *
+ * Please check the README.md for instructions and more detailed description.
+ *
+ * Created by Jan Procházka (https://github.com/P-R-O-C-H-Y/)
+ */
+
+#ifndef ZIGBEE_MODE_ED
+#error "Zigbee coordinator mode is not selected in Tools->Zigbee mode"
+#endif
+
+#include "Zigbee.h"
+
+#define BUTTON_PIN                        9  //Boot button for C6/H2
+#define WIND_SPEED_SENSOR_ENDPOINT_NUMBER 10
+
+ZigbeeWindSpeedSensor zbWindSpeedSensor = ZigbeeWindSpeedSensor(WIND_SPEED_SENSOR_ENDPOINT_NUMBER);
+
+/************************ WindSpeed sensor *****************************/
+static void windspeed_sensor_value_update(void *arg) {
+  for (;;) {
+    // Read wind speed sensor value (simulated now by temperature sensor)
+    float windspeed = temperatureRead();
+    log_v("Wind speed sensor value: %.2fm/s", windspeed);
+    // Update windspeed value in Windspeed sensor EP
+    zbWindSpeedSensor.setWindSpeed(windspeed);
+    delay(1000);
+  }
+}
+
+/********************* Arduino functions **************************/
+void setup() {
+  Serial.begin(115200);
+  while (!Serial) {
+    delay(10);
+  }
+
+  // Init button switch
+  pinMode(BUTTON_PIN, INPUT);
+
+  // Optional: set Zigbee device name and model
+  zbWindSpeedSensor.setManufacturerAndModel("Espressif", "ZigbeeWindSpeedSensor");
+
+  // Set minimum and maximum windspeed measurement value in m/s
+  zbWindSpeedSensor.setMinMaxValue(0, 50);
+
+  // Set tolerance for windspeed measurement in m/s (lowest possible value is 0.01 m/s)
+  zbWindSpeedSensor.setTolerance(1);
+
+  // Add endpoint to Zigbee Core
+  Zigbee.addEndpoint(&zbWindSpeedSensor);
+
+  Serial.println("Starting Zigbee...");
+  // When all EPs are registered, start Zigbee in End Device mode
+  if (!Zigbee.begin()) {
+    Serial.println("Zigbee failed to start!");
+    Serial.println("Rebooting...");
+    ESP.restart();
+  } else {
+    Serial.println("Zigbee started successfully!");
+  }
+  Serial.println("Connecting to network");
+  while (!Zigbee.connected()) {
+    Serial.print(".");
+    delay(100);
+  }
+  Serial.println();
+
+  // Start Wind speed sensor reading task
+  xTaskCreate(windspeed_sensor_value_update, "wind_speed_sensor_update", 2048, NULL, 10, NULL);
+
+  // Set reporting interval for windspeed measurement in seconds, must be called after Zigbee.begin()
+  // min_interval and max_interval in seconds, delta (WindSpeed change in m/s)
+  // if min = 1 and max = 0, reporting is sent only when windspeed changes by delta
+  // if min = 0 and max = 10, reporting is sent every 10 seconds or windspeed changes by delta
+  // if min = 0, max = 10 and delta = 0, reporting is sent every 10 seconds regardless of windspeed change
+  zbWindSpeedSensor.setReporting(1, 0, 1);
+}
+
+void loop() {
+  // Checking button for factory reset
+  if (digitalRead(BUTTON_PIN) == LOW) {  // Push button pressed
+    // Key debounce handling
+    delay(100);
+    int startTime = millis();
+    while (digitalRead(BUTTON_PIN) == LOW) {
+      delay(50);
+      if ((millis() - startTime) > 3000) {
+        // If key pressed for more than 3secs, factory reset Zigbee and reboot
+        Serial.println("Resetting Zigbee to factory and rebooting in 1s.");
+        delay(1000);
+        Zigbee.factoryReset();
+      }
+    }
+    zbWindSpeedSensor.reportWindSpeed();
+  }
+  delay(100);
+}
diff --git a/libraries/Zigbee/examples/Zigbee_Wind_Speed_Sensor/ci.json b/libraries/Zigbee/examples/Zigbee_Wind_Speed_Sensor/ci.json
new file mode 100644
index 00000000000..ceacc367801
--- /dev/null
+++ b/libraries/Zigbee/examples/Zigbee_Wind_Speed_Sensor/ci.json
@@ -0,0 +1,7 @@
+{
+  "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
+  "requires": [
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
+  ]
+}
diff --git a/libraries/Zigbee/examples/Zigbee_Window_Covering/ci.json b/libraries/Zigbee/examples/Zigbee_Window_Covering/ci.json
index 7b7ccef8ed7..ceacc367801 100644
--- a/libraries/Zigbee/examples/Zigbee_Window_Covering/ci.json
+++ b/libraries/Zigbee/examples/Zigbee_Window_Covering/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/keywords.txt b/libraries/Zigbee/keywords.txt
index 483d54eb712..586d2bdc677 100644
--- a/libraries/Zigbee/keywords.txt
+++ b/libraries/Zigbee/keywords.txt
@@ -21,12 +21,23 @@ ZigbeeThermostat	KEYWORD1
 ZigbeeFlowSensor	KEYWORD1
 ZigbeePressureSensor	KEYWORD1
 ZigbeeOccupancySensor	KEYWORD1
+ZigbeeAnalog	KEYWORD1
+ZigbeeCarbonDioxideSensor	KEYWORD1
+ZigbeeContactSwitch	KEYWORD1
+ZigbeeDoorWindowHandle	KEYWORD1
+ZigbeeGateway	KEYWORD1
+ZigbeeRangeExtender	KEYWORD1
+ZigbeeVibrationSensor	KEYWORD1
+ZigbeeWindowCovering	KEYWORD1
+ZigbeeIlluminanceSensor	KEYWORD1
 
 # Other
 zigbee_role_t	KEYWORD1
 zbstring_t	KEYWORD1
 zb_device_params_t	KEYWORD1
 zigbee_scan_result_t	KEYWORD1
+zb_power_source_t	KEYWORD1
+ZigbeeWindowCoveringType	KEYWORD1
 
 #######################################
 # Methods and Functions (KEYWORD2)
@@ -113,6 +124,9 @@ setHumidity	KEYWORD2
 setHumidityReporting	KEYWORD2
 reportHumidity	KEYWORD2
 
+# ZigbeeIlluminanceSensor
+setIlluminance	KEYWORD2
+
 # ZigbeeFlowSensor
 setFlow	KEYWORD2
 
@@ -126,6 +140,43 @@ setSensorType	KEYWORD2
 # ZigbeeCarbonDioxideSensor
 setCarbonDioxide	KEYWORD2
 
+# ZigbeeAnalog
+addAnalogValue	KEYWORD2
+addAnalogInput	KEYWORD2
+addAnalogOutput	KEYWORD2
+onAnalogOutputChange	KEYWORD2
+setAnalogValue	KEYWORD2
+setAnalogInput	KEYWORD2
+reportAnalogInput	KEYWORD2
+setAnalogInputReporting	KEYWORD2
+
+# ZigbeeCarbonDioxideSensor
+setCarbonDioxide	KEYWORD2
+
+# ZigbeeContactSwitch + ZigbeeDoorWindowHandle
+setIASClientEndpoint	KEYWORD2
+setClosed	KEYWORD2
+setOpen	KEYWORD2
+setTilted	KEYWORD2
+
+# ZigbeeVibrationSensor
+setVibration	KEYWORD2
+
+ZigbeeWindowCovering
+onOpen	KEYWORD2
+onClose	KEYWORD2
+onGoToLiftPercentage	KEYWORD2
+onGoToTiltPercentage	KEYWORD2
+onStop	KEYWORD2
+setLiftPosition	KEYWORD2
+setLiftPercentage	KEYWORD2
+setTiltPosition	KEYWORD2
+setTiltPercentage	KEYWORD2
+setCoveringType	KEYWORD2
+setConfigStatus	KEYWORD2
+setMode	KEYWORD2
+setLimits	KEYWORD2
+
 #######################################
 # Constants (LITERAL1)
 #######################################
@@ -137,7 +188,6 @@ ZIGBEE_DEFAULT_ED_CONFIG	LITERAL1
 ZIGBEE_DEFAULT_ROUTER_CONFIG	LITERAL1
 ZIGBEE_DEFAULT_COORDINATOR_CONFIG	LITERAL1
 ZIGBEE_DEFAULT_RADIO_CONFIG	LITERAL1
+ZIGBEE_DEFAULT_UART_RCP_RADIO_CONFIG	LITERAL1
 ZIGBEE_DEFAULT_HOST_CONFIG	LITERAL1
 ZB_ARRAY_LENTH	LITERAL1
-XYZ_TO_RGB	LITERAL1
-RGB_TO_XYZ	LITERAL1
diff --git a/libraries/Zigbee/library.properties b/libraries/Zigbee/library.properties
index 29704db1a92..9a558d70216 100644
--- a/libraries/Zigbee/library.properties
+++ b/libraries/Zigbee/library.properties
@@ -1,5 +1,5 @@
 name=Zigbee
-version=3.1.3
+version=3.2.0
 author=P-R-O-C-H-Y
 maintainer=Jan Procházka <jan.prochazka@espressif.com>
 sentence=Enables zigbee connection with the ESP32
diff --git a/libraries/Zigbee/src/Zigbee.h b/libraries/Zigbee/src/Zigbee.h
index b785c28d0df..ea42e9dd41a 100644
--- a/libraries/Zigbee/src/Zigbee.h
+++ b/libraries/Zigbee/src/Zigbee.h
@@ -15,10 +15,15 @@
 #include "ep/ZigbeeTempSensor.h"
 #include "ep/ZigbeeThermostat.h"
 #include "ep/ZigbeePressureSensor.h"
+#include "ep/ZigbeeAnalog.h"
 #include "ep/ZigbeeFlowSensor.h"
 #include "ep/ZigbeeOccupancySensor.h"
+#include "ep/ZigbeeIlluminanceSensor.h"
 #include "ep/ZigbeeCarbonDioxideSensor.h"
 #include "ep/ZigbeeContactSwitch.h"
 #include "ep/ZigbeeDoorWindowHandle.h"
 #include "ep/ZigbeeWindowCovering.h"
 #include "ep/ZigbeeVibrationSensor.h"
+#include "ep/ZigbeeRangeExtender.h"
+#include "ep/ZigbeeGateway.h"
+#include "ep/ZigbeeWindSpeedSensor.h"
diff --git a/libraries/Zigbee/src/ZigbeeCore.cpp b/libraries/Zigbee/src/ZigbeeCore.cpp
index 19f4d0872b8..b93542159a6 100644
--- a/libraries/Zigbee/src/ZigbeeCore.cpp
+++ b/libraries/Zigbee/src/ZigbeeCore.cpp
@@ -1,14 +1,21 @@
 /* Zigbee Core Functions */
 
 #include "ZigbeeCore.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 #include "ZigbeeHandlers.cpp"
 #include "Arduino.h"
 
-#define ZB_INIT_TIMEOUT 30000  // 30 seconds
+#ifdef __cplusplus
+extern "C" {
+#endif
+#include "zboss_api.h"
+extern zb_ret_t zb_nvram_write_dataset(zb_nvram_dataset_types_t t);                            // rejoin scanning workaround
+extern void zb_set_ed_node_descriptor(bool power_src, bool rx_on_when_idle, bool alloc_addr);  // sleepy device power mode workaround
+#ifdef __cplusplus
+}
+#endif
 
-extern "C" void zb_set_ed_node_descriptor(bool power_src, bool rx_on_when_idle, bool alloc_addr);
 static bool edBatteryPowered = false;
 
 ZigbeeCore::ZigbeeCore() {
@@ -18,6 +25,7 @@ ZigbeeCore::ZigbeeCore() {
   _primary_channel_mask = ESP_ZB_TRANSCEIVER_ALL_CHANNELS_MASK;
   _open_network = 0;
   _scan_status = ZB_SCAN_FAILED;
+  _begin_timeout = ZB_BEGIN_TIMEOUT_DEFAULT;
   _started = false;
   _connected = false;
   _scan_duration = 3;  // default scan duration
@@ -39,8 +47,11 @@ bool ZigbeeCore::begin(esp_zb_cfg_t *role_cfg, bool erase_nvs) {
     return false;
   }
   _role = (zigbee_role_t)role_cfg->esp_zb_role;
-  if (xSemaphoreTake(lock, ZB_INIT_TIMEOUT) != pdTRUE) {
-    log_e("ZigbeeCore begin timeout");
+  if (xSemaphoreTake(lock, _begin_timeout) != pdTRUE) {
+    log_e("ZigbeeCore begin failed or timeout");
+    if (_role != ZIGBEE_COORDINATOR) {  // Only End Device and Router can rejoin
+      resetNVRAMChannelMask();
+    }
   }
   return started();
 }
@@ -71,23 +82,35 @@ bool ZigbeeCore::begin(zigbee_role_t role, bool erase_nvs) {
     }
     default: log_e("Invalid Zigbee Role"); return false;
   }
-  if (!status || xSemaphoreTake(lock, ZB_INIT_TIMEOUT) != pdTRUE) {
+  if (!status || xSemaphoreTake(lock, _begin_timeout) != pdTRUE) {
     log_e("ZigbeeCore begin failed or timeout");
+    if (_role != ZIGBEE_COORDINATOR) {  // Only End Device and Router can rejoin
+      resetNVRAMChannelMask();
+    }
   }
   return started();
 }
 
-void ZigbeeCore::addEndpoint(ZigbeeEP *ep) {
+bool ZigbeeCore::addEndpoint(ZigbeeEP *ep) {
   ep_objects.push_back(ep);
 
   log_d("Endpoint: %d, Device ID: 0x%04x", ep->_endpoint, ep->_device_id);
   //Register clusters and ep_list to the ZigbeeCore class's ep_list
   if (ep->_ep_config.endpoint == 0 || ep->_cluster_list == nullptr) {
     log_e("Endpoint config or Cluster list is not initialized, EP not added to ZigbeeCore's EP list");
-    return;
+    return false;
   }
-
-  esp_zb_ep_list_add_ep(_zb_ep_list, ep->_cluster_list, ep->_ep_config);
+  esp_err_t ret = ESP_OK;
+  if (ep->_device_id == ESP_ZB_HA_HOME_GATEWAY_DEVICE_ID) {
+    ret = esp_zb_ep_list_add_gateway_ep(_zb_ep_list, ep->_cluster_list, ep->_ep_config);
+  } else {
+    ret = esp_zb_ep_list_add_ep(_zb_ep_list, ep->_cluster_list, ep->_ep_config);
+  }
+  if (ret != ESP_OK) {
+    log_e("Failed to add endpoint: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
 static void esp_zb_task(void *pvParameters) {
@@ -156,7 +179,7 @@ bool ZigbeeCore::zigbeeInit(esp_zb_cfg_t *zb_cfg, bool erase_nvs) {
   }
 
   // Create Zigbee task and start Zigbee stack
-  xTaskCreate(esp_zb_task, "Zigbee_main", 4096, NULL, 5, NULL);
+  xTaskCreate(esp_zb_task, "Zigbee_main", 8192, NULL, 5, NULL);
 
   return true;
 }
@@ -216,6 +239,7 @@ void esp_zb_app_signal_handler(esp_zb_app_signal_t *signal_struct) {
   switch (sig_type) {
     case ESP_ZB_ZDO_SIGNAL_SKIP_STARTUP:  // Common
       log_i("Zigbee stack initialized");
+      log_d("Zigbee channel mask: 0x%08x", esp_zb_get_channel_mask());
       esp_zb_bdb_start_top_level_commissioning(ESP_ZB_BDB_MODE_INITIALIZATION);
       break;
     case ESP_ZB_BDB_SIGNAL_DEVICE_FIRST_START:  // Common
@@ -241,6 +265,8 @@ void esp_zb_app_signal_handler(esp_zb_app_signal_t *signal_struct) {
             log_i("Opening network for joining for %d seconds", Zigbee._open_network);
             esp_zb_bdb_open_network(Zigbee._open_network);
           } else {
+            // Save the channel mask to NVRAM in case of reboot which may be on a different channel after a change in the network
+            Zigbee.setNVRAMChannelMask(1 << esp_zb_get_current_channel());
             Zigbee._connected = true;
           }
           Zigbee.searchBindings();
@@ -285,6 +311,8 @@ void esp_zb_app_signal_handler(esp_zb_app_signal_t *signal_struct) {
             extended_pan_id[0], esp_zb_get_pan_id(), esp_zb_get_current_channel(), esp_zb_get_short_address()
           );
           Zigbee._connected = true;
+          // Set channel mask and write to NVRAM, so that the device will re-join the network faster after reboot (scan only on the current channel)
+          Zigbee.setNVRAMChannelMask(1 << esp_zb_get_current_channel());
         } else {
           log_i("Network steering was not successful (status: %s)", esp_err_to_name(err_status));
           esp_zb_scheduler_alarm((esp_zb_callback_t)bdb_start_top_level_commissioning_cb, ESP_ZB_BDB_MODE_NETWORK_STEERING, 1000);
@@ -345,16 +373,22 @@ void esp_zb_app_signal_handler(esp_zb_app_signal_t *signal_struct) {
     case ESP_ZB_ZDO_SIGNAL_LEAVE:  // End Device + Router
       // Device was removed from the network, factory reset the device
       if ((zigbee_role_t)Zigbee.getRole() != ZIGBEE_COORDINATOR) {
-        Zigbee.factoryReset();
+        Zigbee.factoryReset(true);
       }
       break;
     default: log_v("ZDO signal: %s (0x%x), status: %s", esp_zb_zdo_signal_to_string(sig_type), sig_type, esp_err_to_name(err_status)); break;
   }
 }
 
-void ZigbeeCore::factoryReset() {
-  log_v("Factory resetting Zigbee stack, device will reboot");
-  esp_zb_factory_reset();
+void ZigbeeCore::factoryReset(bool restart) {
+  if (restart) {
+    log_v("Factory resetting Zigbee stack, device will reboot");
+    esp_zb_factory_reset();
+  } else {
+    log_v("Factory resetting Zigbee NVRAM to factory default");
+    log_w("The device will not reboot, to take effect please reboot the device manually");
+    esp_zb_zcl_reset_nvram_to_factory_default();
+  }
 }
 
 void ZigbeeCore::scanCompleteCallback(esp_zb_zdp_status_t zdo_status, uint8_t count, esp_zb_network_descriptor_t *nwk_descriptor) {
@@ -479,6 +513,20 @@ void ZigbeeCore::searchBindings() {
   esp_zb_zdo_binding_table_req(mb_req, bindingTableCb, (void *)mb_req);
 }
 
+void ZigbeeCore::resetNVRAMChannelMask() {
+  _primary_channel_mask = ESP_ZB_TRANSCEIVER_ALL_CHANNELS_MASK;
+  esp_zb_set_channel_mask(_primary_channel_mask);
+  zb_nvram_write_dataset(ZB_NVRAM_COMMON_DATA);
+  log_v("Channel mask reset to all channels");
+}
+
+void ZigbeeCore::setNVRAMChannelMask(uint32_t mask) {
+  _primary_channel_mask = mask;
+  esp_zb_set_channel_mask(_primary_channel_mask);
+  zb_nvram_write_dataset(ZB_NVRAM_COMMON_DATA);
+  log_v("Channel mask set to 0x%08x", mask);
+}
+
 // Function to convert enum value to string
 const char *ZigbeeCore::getDeviceTypeString(esp_zb_ha_standard_devices_t deviceId) {
   switch (deviceId) {
@@ -526,4 +574,4 @@ const char *ZigbeeCore::getDeviceTypeString(esp_zb_ha_standard_devices_t deviceI
 
 ZigbeeCore Zigbee = ZigbeeCore();
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ZigbeeCore.h b/libraries/Zigbee/src/ZigbeeCore.h
index 02dce54e5ff..06c3ec4551a 100644
--- a/libraries/Zigbee/src/ZigbeeCore.h
+++ b/libraries/Zigbee/src/ZigbeeCore.h
@@ -4,7 +4,7 @@
 
 #include "soc/soc_caps.h"
 #include "sdkconfig.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 #include "esp_zigbee_core.h"
 #include "zdo/esp_zigbee_zdo_common.h"
@@ -28,6 +28,8 @@ typedef enum {
 #define ZB_SCAN_RUNNING (-1)
 #define ZB_SCAN_FAILED  (-2)
 
+#define ZB_BEGIN_TIMEOUT_DEFAULT 30000  // 30 seconds
+
 #define ZIGBEE_DEFAULT_ED_CONFIG()                                      \
   {                                                                     \
     .esp_zb_role = ESP_ZB_DEVICE_TYPE_ED, .install_code_policy = false, \
@@ -60,11 +62,32 @@ typedef enum {
     }                                                                                         \
   }
 
+#define ZIGBEE_DEFAULT_UART_RCP_RADIO_CONFIG()   \
+  {                                              \
+    .radio_mode = ZB_RADIO_MODE_UART_RCP,        \
+    .radio_uart_config = {                       \
+      .port = UART_NUM_1,                        \
+      .rx_pin = GPIO_NUM_NC,                     \
+      .tx_pin = GPIO_NUM_NC,                     \
+      .uart_config =                             \
+        {                                        \
+          .baud_rate = 460800,                   \
+          .data_bits = UART_DATA_8_BITS,         \
+          .parity = UART_PARITY_DISABLE,         \
+          .stop_bits = UART_STOP_BITS_1,         \
+          .flow_ctrl = UART_HW_FLOWCTRL_DISABLE, \
+          .rx_flow_ctrl_thresh = 0,              \
+          .source_clk = UART_SCLK_DEFAULT,       \
+        },                                       \
+    },                                           \
+  }
+
 class ZigbeeCore {
 private:
   esp_zb_radio_config_t _radio_config;
   esp_zb_host_config_t _host_config;
   uint32_t _primary_channel_mask;
+  uint32_t _begin_timeout;
   int16_t _scan_status;
   uint8_t _scan_duration;
   bool _rx_on_when_idle;
@@ -83,6 +106,8 @@ class ZigbeeCore {
   const char *getDeviceTypeString(esp_zb_ha_standard_devices_t deviceId);
   void searchBindings();
   static void bindingTableCb(const esp_zb_zdo_binding_table_info_t *table_info, void *user_ctx);
+  void resetNVRAMChannelMask();             // Reset to default mask also in NVRAM
+  void setNVRAMChannelMask(uint32_t mask);  // Set channel mask in NVRAM
 
 public:
   ZigbeeCore();
@@ -104,7 +129,7 @@ class ZigbeeCore {
     return _role;
   }
 
-  void addEndpoint(ZigbeeEP *ep);
+  bool addEndpoint(ZigbeeEP *ep);
   //void removeEndpoint(ZigbeeEP *ep);
 
   void setRadioConfig(esp_zb_radio_config_t config);
@@ -114,7 +139,8 @@ class ZigbeeCore {
   esp_zb_host_config_t getHostConfig();
 
   void setPrimaryChannelMask(uint32_t mask);  // By default all channels are scanned (11-26) -> mask 0x07FFF800
-  void setScanDuration(uint8_t duration);     // Can be set from 1 - 4. 1 is fastest, 4 is slowest
+
+  void setScanDuration(uint8_t duration);  // Can be set from 1 - 4. 1 is fastest, 4 is slowest
   uint8_t getScanDuration() {
     return _scan_duration;
   }
@@ -125,7 +151,9 @@ class ZigbeeCore {
   bool getRxOnWhenIdle() {
     return _rx_on_when_idle;
   }
-
+  void setTimeout(uint32_t timeout) {
+    _begin_timeout = timeout;
+  }
   void setRebootOpenNetwork(uint8_t time);
   void openNetwork(uint8_t time);
 
@@ -136,7 +164,7 @@ class ZigbeeCore {
   zigbee_scan_result_t *getScanResult();
   void scanDelete();
 
-  void factoryReset();
+  void factoryReset(bool restart = true);
 
   // Friend function declaration to allow access to private members
   friend void esp_zb_app_signal_handler(esp_zb_app_signal_t *signal_struct);
@@ -144,4 +172,4 @@ class ZigbeeCore {
 
 extern ZigbeeCore Zigbee;
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ZigbeeEP.cpp b/libraries/Zigbee/src/ZigbeeEP.cpp
index f3f890393eb..e7d507dc441 100644
--- a/libraries/Zigbee/src/ZigbeeEP.cpp
+++ b/libraries/Zigbee/src/ZigbeeEP.cpp
@@ -2,7 +2,7 @@
 
 #include "ZigbeeEP.h"
 
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 #include "esp_zigbee_cluster.h"
 #include "zcl/esp_zigbee_zcl_power_config.h"
@@ -19,6 +19,7 @@ ZigbeeEP::ZigbeeEP(uint8_t endpoint) {
   _ep_config.endpoint = 0;
   _cluster_list = nullptr;
   _on_identify = nullptr;
+  _time_status = 0;
   if (!lock) {
     lock = xSemaphoreCreateBinary();
     if (lock == NULL) {
@@ -31,71 +32,95 @@ void ZigbeeEP::setVersion(uint8_t version) {
   _ep_config.app_device_version = version;
 }
 
-void ZigbeeEP::setManufacturerAndModel(const char *name, const char *model) {
+bool ZigbeeEP::setManufacturerAndModel(const char *name, const char *model) {
   // Convert manufacturer to ZCL string
-  size_t length = strlen(name);
-  if (length > 32) {
-    log_e("Manufacturer name is too long");
-    return;
+  size_t name_length = strlen(name);
+  size_t model_length = strlen(model);
+  if (name_length > 32 || model_length > 32) {
+    log_e("Manufacturer or model name is too long");
+    return false;
   }
   // Allocate a new array of size length + 2 (1 for the length, 1 for null terminator)
-  char *zb_name = new char[length + 2];
+  char *zb_name = new char[name_length + 2];
+  char *zb_model = new char[model_length + 2];
   // Store the length as the first element
-  zb_name[0] = static_cast<char>(length);  // Cast size_t to char
+  zb_name[0] = static_cast<char>(name_length);  // Cast size_t to char
+  zb_model[0] = static_cast<char>(model_length);
   // Use memcpy to copy the characters to the result array
-  memcpy(zb_name + 1, name, length);
+  memcpy(zb_name + 1, name, name_length);
+  memcpy(zb_model + 1, model, model_length);
   // Null-terminate the array
-  zb_name[length + 1] = '\0';
-
-  // Convert model to ZCL string
-  length = strlen(model);
-  if (length > 32) {
-    log_e("Model name is too long");
-    delete[] zb_name;
-    return;
-  }
-  char *zb_model = new char[length + 2];
-  zb_model[0] = static_cast<char>(length);
-  memcpy(zb_model + 1, model, length);
-  zb_model[length + 1] = '\0';
+  zb_name[name_length + 1] = '\0';
+  zb_model[model_length + 1] = '\0';
 
   // Get the basic cluster and update the manufacturer and model attributes
   esp_zb_attribute_list_t *basic_cluster = esp_zb_cluster_list_get_cluster(_cluster_list, ESP_ZB_ZCL_CLUSTER_ID_BASIC, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
-  esp_zb_basic_cluster_add_attr(basic_cluster, ESP_ZB_ZCL_ATTR_BASIC_MANUFACTURER_NAME_ID, (void *)zb_name);
-  esp_zb_basic_cluster_add_attr(basic_cluster, ESP_ZB_ZCL_ATTR_BASIC_MODEL_IDENTIFIER_ID, (void *)zb_model);
+  esp_err_t ret_name = esp_zb_basic_cluster_add_attr(basic_cluster, ESP_ZB_ZCL_ATTR_BASIC_MANUFACTURER_NAME_ID, (void *)zb_name);
+  if (ret_name != ESP_OK) {
+    log_e("Failed to set manufacturer: 0x%x: %s", ret_name, esp_err_to_name(ret_name));
+  }
+  esp_err_t ret_model = esp_zb_basic_cluster_add_attr(basic_cluster, ESP_ZB_ZCL_ATTR_BASIC_MODEL_IDENTIFIER_ID, (void *)zb_model);
+  if (ret_model != ESP_OK) {
+    log_e("Failed to set model: 0x%x: %s", ret_model, esp_err_to_name(ret_model));
+  }
+  delete[] zb_name;
+  delete[] zb_model;
+  return ret_name == ESP_OK && ret_model == ESP_OK;
 }
 
-void ZigbeeEP::setPowerSource(zb_power_source_t power_source, uint8_t battery_percentage) {
+bool ZigbeeEP::setPowerSource(zb_power_source_t power_source, uint8_t battery_percentage) {
   esp_zb_attribute_list_t *basic_cluster = esp_zb_cluster_list_get_cluster(_cluster_list, ESP_ZB_ZCL_CLUSTER_ID_BASIC, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
-  esp_zb_cluster_update_attr(basic_cluster, ESP_ZB_ZCL_ATTR_BASIC_POWER_SOURCE_ID, (void *)&power_source);
+  esp_err_t ret = esp_zb_cluster_update_attr(basic_cluster, ESP_ZB_ZCL_ATTR_BASIC_POWER_SOURCE_ID, (void *)&power_source);
+  if (ret != ESP_OK) {
+    log_e("Failed to set power source: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
 
   if (power_source == ZB_POWER_SOURCE_BATTERY) {
     // Add power config cluster and battery percentage attribute
+    if (battery_percentage > 100) {
+      battery_percentage = 100;
+    }
     battery_percentage = battery_percentage * 2;
     esp_zb_attribute_list_t *power_config_cluster = esp_zb_zcl_attr_list_create(ESP_ZB_ZCL_CLUSTER_ID_POWER_CONFIG);
-    esp_zb_power_config_cluster_add_attr(power_config_cluster, ESP_ZB_ZCL_ATTR_POWER_CONFIG_BATTERY_PERCENTAGE_REMAINING_ID, (void *)&battery_percentage);
-    esp_zb_cluster_list_add_power_config_cluster(_cluster_list, power_config_cluster, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
+    ret = esp_zb_power_config_cluster_add_attr(power_config_cluster, ESP_ZB_ZCL_ATTR_POWER_CONFIG_BATTERY_PERCENTAGE_REMAINING_ID, (void *)&battery_percentage);
+    if (ret != ESP_OK) {
+      log_e("Failed to add battery percentage attribute: 0x%x: %s", ret, esp_err_to_name(ret));
+      return false;
+    }
+    ret = esp_zb_cluster_list_add_power_config_cluster(_cluster_list, power_config_cluster, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
+    if (ret != ESP_OK) {
+      log_e("Failed to add power config cluster: 0x%x: %s", ret, esp_err_to_name(ret));
+      return false;
+    }
   }
   _power_source = power_source;
+  return true;
 }
 
-void ZigbeeEP::setBatteryPercentage(uint8_t percentage) {
+bool ZigbeeEP::setBatteryPercentage(uint8_t percentage) {
   // 100% = 200 in decimal, 0% = 0
   // Convert percentage to 0-200 range
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
   if (percentage > 100) {
     percentage = 100;
   }
   percentage = percentage * 2;
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_set_attribute_val(
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_POWER_CONFIG, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_POWER_CONFIG_BATTERY_PERCENTAGE_REMAINING_ID, &percentage,
     false
   );
   esp_zb_lock_release();
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set battery percentage: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    return false;
+  }
   log_v("Battery percentage updated");
+  return true;
 }
 
-void ZigbeeEP::reportBatteryPercentage() {
+bool ZigbeeEP::reportBatteryPercentage() {
   /* Send report attributes command */
   esp_zb_zcl_report_attr_cmd_t report_attr_cmd;
   report_attr_cmd.address_mode = ESP_ZB_APS_ADDR_MODE_DST_ADDR_ENDP_NOT_PRESENT;
@@ -103,11 +128,17 @@ void ZigbeeEP::reportBatteryPercentage() {
   report_attr_cmd.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_CLI;
   report_attr_cmd.clusterID = ESP_ZB_ZCL_CLUSTER_ID_POWER_CONFIG;
   report_attr_cmd.zcl_basic_cmd.src_endpoint = _endpoint;
+  report_attr_cmd.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
 
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);
+  esp_err_t ret = esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);
   esp_zb_lock_release();
+  if (ret != ESP_OK) {
+    log_e("Failed to report battery percentage: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
   log_v("Battery percentage reported");
+  return true;
 }
 
 char *ZigbeeEP::readManufacturer(uint8_t endpoint, uint16_t short_addr, esp_zb_ieee_addr_t ieee_addr) {
@@ -132,7 +163,9 @@ char *ZigbeeEP::readManufacturer(uint8_t endpoint, uint16_t short_addr, esp_zb_i
   read_req.attr_number = ZB_ARRAY_LENTH(attributes);
   read_req.attr_field = attributes;
 
-  // clear read manufacturer
+  if (_read_manufacturer != nullptr) {
+    free(_read_manufacturer);
+  }
   _read_manufacturer = nullptr;
 
   esp_zb_lock_acquire(portMAX_DELAY);
@@ -168,7 +201,9 @@ char *ZigbeeEP::readModel(uint8_t endpoint, uint16_t short_addr, esp_zb_ieee_add
   read_req.attr_number = ZB_ARRAY_LENTH(attributes);
   read_req.attr_field = attributes;
 
-  // clear read model
+  if (_read_model != nullptr) {
+    free(_read_model);
+  }
   _read_model = nullptr;
 
   esp_zb_lock_acquire(portMAX_DELAY);
@@ -238,9 +273,8 @@ void ZigbeeEP::zbIdentify(const esp_zb_zcl_set_attr_value_message_t *message) {
   }
 }
 
-void ZigbeeEP::addTimeCluster(tm time, int32_t gmt_offset) {
+bool ZigbeeEP::addTimeCluster(tm time, int32_t gmt_offset) {
   time_t utc_time = 0;
-
   // Check if time is set
   if (time.tm_year > 0) {
     // Convert time to UTC
@@ -249,26 +283,63 @@ void ZigbeeEP::addTimeCluster(tm time, int32_t gmt_offset) {
 
   // Create time cluster server attributes
   esp_zb_attribute_list_t *time_cluster_server = esp_zb_zcl_attr_list_create(ESP_ZB_ZCL_CLUSTER_ID_TIME);
-  esp_zb_time_cluster_add_attr(time_cluster_server, ESP_ZB_ZCL_ATTR_TIME_TIME_ZONE_ID, (void *)&gmt_offset);
-  esp_zb_time_cluster_add_attr(time_cluster_server, ESP_ZB_ZCL_ATTR_TIME_TIME_ID, (void *)&utc_time);
+  esp_err_t ret = esp_zb_time_cluster_add_attr(time_cluster_server, ESP_ZB_ZCL_ATTR_TIME_TIME_ZONE_ID, (void *)&gmt_offset);
+  if (ret != ESP_OK) {
+    log_e("Failed to add time zone attribute: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  ret = esp_zb_time_cluster_add_attr(time_cluster_server, ESP_ZB_ZCL_ATTR_TIME_TIME_ID, (void *)&utc_time);
+  if (ret != ESP_OK) {
+    log_e("Failed to add time attribute: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  ret = esp_zb_time_cluster_add_attr(time_cluster_server, ESP_ZB_ZCL_ATTR_TIME_TIME_STATUS_ID, (void *)&_time_status);
+  if (ret != ESP_OK) {
+    log_e("Failed to add time status attribute: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
   // Create time cluster client attributes
   esp_zb_attribute_list_t *time_cluster_client = esp_zb_zcl_attr_list_create(ESP_ZB_ZCL_CLUSTER_ID_TIME);
   // Add time clusters to cluster list
-  esp_zb_cluster_list_add_time_cluster(_cluster_list, time_cluster_server, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
-  esp_zb_cluster_list_add_time_cluster(_cluster_list, time_cluster_client, ESP_ZB_ZCL_CLUSTER_CLIENT_ROLE);
+  ret = esp_zb_cluster_list_add_time_cluster(_cluster_list, time_cluster_server, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
+  if (ret != ESP_OK) {
+    log_e("Failed to add time cluster (server role): 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  ret = esp_zb_cluster_list_add_time_cluster(_cluster_list, time_cluster_client, ESP_ZB_ZCL_CLUSTER_CLIENT_ROLE);
+  if (ret != ESP_OK) {
+    log_e("Failed to add time cluster (client role): 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeeEP::setTime(tm time) {
+bool ZigbeeEP::setTime(tm time) {
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
   time_t utc_time = mktime(&time);
+  log_d("Setting time to %lld", utc_time);
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_set_attribute_val(_endpoint, ESP_ZB_ZCL_CLUSTER_ID_TIME, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_TIME_TIME_ID, &utc_time, false);
+  ret = esp_zb_zcl_set_attribute_val(_endpoint, ESP_ZB_ZCL_CLUSTER_ID_TIME, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_TIME_TIME_ID, &utc_time, false);
   esp_zb_lock_release();
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set time: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeeEP::setTimezone(int32_t gmt_offset) {
+bool ZigbeeEP::setTimezone(int32_t gmt_offset) {
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
+  log_d("Setting timezone to %d", gmt_offset);
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_set_attribute_val(_endpoint, ESP_ZB_ZCL_CLUSTER_ID_TIME, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_TIME_TIME_ZONE_ID, &gmt_offset, false);
+  ret =
+    esp_zb_zcl_set_attribute_val(_endpoint, ESP_ZB_ZCL_CLUSTER_ID_TIME, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_TIME_TIME_ZONE_ID, &gmt_offset, false);
   esp_zb_lock_release();
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set timezone: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
 tm ZigbeeEP::getTime(uint8_t endpoint, int32_t short_addr, esp_zb_ieee_addr_t ieee_addr) {
@@ -306,6 +377,16 @@ tm ZigbeeEP::getTime(uint8_t endpoint, int32_t short_addr, esp_zb_ieee_addr_t ie
 
   struct tm *timeinfo = localtime(&_read_time);
   if (timeinfo) {
+    // Update time
+    setTime(*timeinfo);
+    // Update time status to synced
+    _time_status |= 0x02;
+    esp_zb_lock_acquire(portMAX_DELAY);
+    esp_zb_zcl_set_attribute_val(
+      _endpoint, ESP_ZB_ZCL_CLUSTER_ID_TIME, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_TIME_TIME_STATUS_ID, &_time_status, false
+    );
+    esp_zb_lock_release();
+
     return *timeinfo;
   } else {
     log_e("Error while converting time");
@@ -343,8 +424,9 @@ int32_t ZigbeeEP::getTimezone(uint8_t endpoint, int32_t short_addr, esp_zb_ieee_
   //Wait for response or timeout
   if (xSemaphoreTake(lock, ZB_CMD_TIMEOUT) != pdTRUE) {
     log_e("Error while reading timezone");
+    return 0;
   }
-
+  setTimezone(_read_timezone);
   return _read_timezone;
 }
 
@@ -376,7 +458,7 @@ void ZigbeeEP::zbReadTimeCluster(const esp_zb_zcl_attribute_t *attribute) {
 //     uint8_t max_data_size; /*!< The maximum size of OTA data */
 // } esp_zb_zcl_ota_upgrade_client_variable_t;
 
-void ZigbeeEP::addOTAClient(
+bool ZigbeeEP::addOTAClient(
   uint32_t file_version, uint32_t downloaded_file_ver, uint16_t hw_version, uint16_t manufacturer, uint16_t image_type, uint8_t max_data_size
 ) {
 
@@ -396,11 +478,27 @@ void ZigbeeEP::addOTAClient(
   uint16_t ota_upgrade_server_addr = 0xffff;
   uint8_t ota_upgrade_server_ep = 0xff;
 
-  ESP_ERROR_CHECK(esp_zb_ota_cluster_add_attr(ota_cluster, ESP_ZB_ZCL_ATTR_OTA_UPGRADE_CLIENT_DATA_ID, (void *)&variable_config));
-  ESP_ERROR_CHECK(esp_zb_ota_cluster_add_attr(ota_cluster, ESP_ZB_ZCL_ATTR_OTA_UPGRADE_SERVER_ADDR_ID, (void *)&ota_upgrade_server_addr));
-  ESP_ERROR_CHECK(esp_zb_ota_cluster_add_attr(ota_cluster, ESP_ZB_ZCL_ATTR_OTA_UPGRADE_SERVER_ENDPOINT_ID, (void *)&ota_upgrade_server_ep));
-
-  ESP_ERROR_CHECK(esp_zb_cluster_list_add_ota_cluster(_cluster_list, ota_cluster, ESP_ZB_ZCL_CLUSTER_CLIENT_ROLE));
+  esp_err_t ret = esp_zb_ota_cluster_add_attr(ota_cluster, ESP_ZB_ZCL_ATTR_OTA_UPGRADE_CLIENT_DATA_ID, (void *)&variable_config);
+  if (ret != ESP_OK) {
+    log_e("Failed to add OTA client data: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  ret = esp_zb_ota_cluster_add_attr(ota_cluster, ESP_ZB_ZCL_ATTR_OTA_UPGRADE_SERVER_ADDR_ID, (void *)&ota_upgrade_server_addr);
+  if (ret != ESP_OK) {
+    log_e("Failed to add OTA server address: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  ret = esp_zb_ota_cluster_add_attr(ota_cluster, ESP_ZB_ZCL_ATTR_OTA_UPGRADE_SERVER_ENDPOINT_ID, (void *)&ota_upgrade_server_ep);
+  if (ret != ESP_OK) {
+    log_e("Failed to add OTA server endpoint: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  ret = esp_zb_cluster_list_add_ota_cluster(_cluster_list, ota_cluster, ESP_ZB_ZCL_CLUSTER_CLIENT_ROLE);
+  if (ret != ESP_OK) {
+    log_e("Failed to add OTA cluster: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
 static void findOTAServer(esp_zb_zdp_status_t zdo_status, uint16_t addr, uint8_t endpoint, void *user_ctx) {
@@ -431,4 +529,42 @@ void ZigbeeEP::requestOTAUpdate() {
   esp_zb_lock_release();
 }
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+const char *ZigbeeEP::esp_zb_zcl_status_to_name(esp_zb_zcl_status_t status) {
+  switch (status) {
+    case ESP_ZB_ZCL_STATUS_SUCCESS:               return "Success";
+    case ESP_ZB_ZCL_STATUS_FAIL:                  return "Fail";
+    case ESP_ZB_ZCL_STATUS_NOT_AUTHORIZED:        return "Not authorized";
+    case ESP_ZB_ZCL_STATUS_MALFORMED_CMD:         return "Malformed command";
+    case ESP_ZB_ZCL_STATUS_UNSUP_CLUST_CMD:       return "Unsupported cluster command";
+    case ESP_ZB_ZCL_STATUS_UNSUP_GEN_CMD:         return "Unsupported general command";
+    case ESP_ZB_ZCL_STATUS_UNSUP_MANUF_CLUST_CMD: return "Unsupported manufacturer cluster command";
+    case ESP_ZB_ZCL_STATUS_UNSUP_MANUF_GEN_CMD:   return "Unsupported manufacturer general command";
+    case ESP_ZB_ZCL_STATUS_INVALID_FIELD:         return "Invalid field";
+    case ESP_ZB_ZCL_STATUS_UNSUP_ATTRIB:          return "Unsupported attribute";
+    case ESP_ZB_ZCL_STATUS_INVALID_VALUE:         return "Invalid value";
+    case ESP_ZB_ZCL_STATUS_READ_ONLY:             return "Read only";
+    case ESP_ZB_ZCL_STATUS_INSUFF_SPACE:          return "Insufficient space";
+    case ESP_ZB_ZCL_STATUS_DUPE_EXISTS:           return "Duplicate exists";
+    case ESP_ZB_ZCL_STATUS_NOT_FOUND:             return "Not found";
+    case ESP_ZB_ZCL_STATUS_UNREPORTABLE_ATTRIB:   return "Unreportable attribute";
+    case ESP_ZB_ZCL_STATUS_INVALID_TYPE:          return "Invalid type";
+    case ESP_ZB_ZCL_STATUS_WRITE_ONLY:            return "Write only";
+    case ESP_ZB_ZCL_STATUS_INCONSISTENT:          return "Inconsistent";
+    case ESP_ZB_ZCL_STATUS_ACTION_DENIED:         return "Action denied";
+    case ESP_ZB_ZCL_STATUS_TIMEOUT:               return "Timeout";
+    case ESP_ZB_ZCL_STATUS_ABORT:                 return "Abort";
+    case ESP_ZB_ZCL_STATUS_INVALID_IMAGE:         return "Invalid OTA upgrade image";
+    case ESP_ZB_ZCL_STATUS_WAIT_FOR_DATA:         return "Server does not have data block available yet";
+    case ESP_ZB_ZCL_STATUS_NO_IMAGE_AVAILABLE:    return "No image available";
+    case ESP_ZB_ZCL_STATUS_REQUIRE_MORE_IMAGE:    return "Require more image";
+    case ESP_ZB_ZCL_STATUS_NOTIFICATION_PENDING:  return "Notification pending";
+    case ESP_ZB_ZCL_STATUS_HW_FAIL:               return "Hardware failure";
+    case ESP_ZB_ZCL_STATUS_SW_FAIL:               return "Software failure";
+    case ESP_ZB_ZCL_STATUS_CALIB_ERR:             return "Calibration error";
+    case ESP_ZB_ZCL_STATUS_UNSUP_CLUST:           return "Cluster is not found on the target endpoint";
+    case ESP_ZB_ZCL_STATUS_LIMIT_REACHED:         return "Limit reached";
+    default:                                      return "Unknown status";
+  }
+}
+
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ZigbeeEP.h b/libraries/Zigbee/src/ZigbeeEP.h
index 3bdd7f22b23..bd142344929 100644
--- a/libraries/Zigbee/src/ZigbeeEP.h
+++ b/libraries/Zigbee/src/ZigbeeEP.h
@@ -3,7 +3,7 @@
 #pragma once
 
 #include "ZigbeeCore.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 #include <Arduino.h>
 #include <ColorFormat.h>
@@ -70,21 +70,21 @@ class ZigbeeEP {
   }
 
   // Set Manufacturer name and model
-  void setManufacturerAndModel(const char *name, const char *model);
+  bool setManufacturerAndModel(const char *name, const char *model);
 
   // Methods to read manufacturer and model name from selected endpoint and short address
   char *readManufacturer(uint8_t endpoint, uint16_t short_addr, esp_zb_ieee_addr_t ieee_addr);
   char *readModel(uint8_t endpoint, uint16_t short_addr, esp_zb_ieee_addr_t ieee_addr);
 
   // Set Power source and battery percentage for battery powered devices
-  void setPowerSource(zb_power_source_t power_source, uint8_t percentage = 255);
-  void setBatteryPercentage(uint8_t percentage);
-  void reportBatteryPercentage();
+  bool setPowerSource(zb_power_source_t power_source, uint8_t percentage = 255);
+  bool setBatteryPercentage(uint8_t percentage);
+  bool reportBatteryPercentage();
 
   // Set time
-  void addTimeCluster(tm time = {}, int32_t gmt_offset = 0);  // gmt offset in seconds
-  void setTime(tm time);
-  void setTimezone(int32_t gmt_offset);
+  bool addTimeCluster(tm time = {}, int32_t gmt_offset = 0);  // gmt offset in seconds
+  bool setTime(tm time);
+  bool setTimezone(int32_t gmt_offset);
 
   // Get time from Coordinator or specific endpoint (blocking until response)
   struct tm getTime(uint8_t endpoint = 1, int32_t short_addr = 0x0000, esp_zb_ieee_addr_t ieee_addr = {0});
@@ -104,8 +104,9 @@ class ZigbeeEP {
    * @param manufacturer The manufacturer code (default: 0x1001).
    * @param image_type The image type code (default: 0x1011).
    * @param max_data_size The maximum data size for OTA transfer (default and recommended: 223).
+   * @return true if the OTA client was added successfully, false otherwise.
    */
-  void addOTAClient(
+  bool addOTAClient(
     uint32_t file_version, uint32_t downloaded_file_ver, uint16_t hw_version, uint16_t manufacturer = 0x1001, uint16_t image_type = 0x1011,
     uint8_t max_data_size = 223
   );
@@ -114,10 +115,10 @@ class ZigbeeEP {
   */
   void requestOTAUpdate();
 
-  // findEndpoind may be implemented by EPs to find and bind devices
+  // findEndpoint may be implemented by EPs to find and bind devices
   virtual void findEndpoint(esp_zb_zdo_match_desc_req_param_t *cmd_req) {};
 
-  //list of all handlers function calls, to be override by EPs implementation
+  // list of all handlers function calls, to be override by EPs implementation
   virtual void zbAttributeSet(const esp_zb_zcl_set_attr_value_message_t *message) {};
   virtual void zbAttributeRead(uint16_t cluster_id, const esp_zb_zcl_attribute_t *attribute) {};
   virtual void zbReadBasicCluster(const esp_zb_zcl_attribute_t *attribute);  //already implemented
@@ -144,6 +145,9 @@ class ZigbeeEP {
   int32_t _read_timezone;
 
 protected:
+  // Convert ZCL status to name
+  const char *esp_zb_zcl_status_to_name(esp_zb_zcl_status_t status);
+
   uint8_t _endpoint;
   esp_zb_ha_standard_devices_t _device_id;
   esp_zb_endpoint_config_t _ep_config;
@@ -153,8 +157,9 @@ class ZigbeeEP {
   std::list<zb_device_params_t *> _bound_devices;
   SemaphoreHandle_t lock;
   zb_power_source_t _power_source;
+  uint8_t _time_status;
 
   friend class ZigbeeCore;
 };
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ZigbeeHandlers.cpp b/libraries/Zigbee/src/ZigbeeHandlers.cpp
index 3af1b6c52aa..eeeb1e8013a 100644
--- a/libraries/Zigbee/src/ZigbeeHandlers.cpp
+++ b/libraries/Zigbee/src/ZigbeeHandlers.cpp
@@ -2,7 +2,7 @@
 #include "ZigbeeCore.h"
 #include "Arduino.h"
 
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 #include "esp_ota_ops.h"
 #if CONFIG_ZB_DELTA_OTA  // Delta OTA, code is prepared for this feature but not enabled by default
@@ -397,4 +397,4 @@ static esp_err_t zb_cmd_default_resp_handler(const esp_zb_zcl_cmd_default_resp_m
   return ESP_OK;
 }
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeAnalog.cpp b/libraries/Zigbee/src/ep/ZigbeeAnalog.cpp
new file mode 100644
index 00000000000..a95668b7afe
--- /dev/null
+++ b/libraries/Zigbee/src/ep/ZigbeeAnalog.cpp
@@ -0,0 +1,123 @@
+#include "ZigbeeAnalog.h"
+#if CONFIG_ZB_ENABLED
+
+ZigbeeAnalog::ZigbeeAnalog(uint8_t endpoint) : ZigbeeEP(endpoint) {
+  _device_id = ESP_ZB_HA_SIMPLE_SENSOR_DEVICE_ID;
+
+  //Create basic analog sensor clusters without configuration
+  _cluster_list = esp_zb_zcl_cluster_list_create();
+  esp_zb_cluster_list_add_basic_cluster(_cluster_list, esp_zb_basic_cluster_create(NULL), ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
+  esp_zb_cluster_list_add_identify_cluster(_cluster_list, esp_zb_identify_cluster_create(NULL), ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
+
+  _ep_config = {.endpoint = _endpoint, .app_profile_id = ESP_ZB_AF_HA_PROFILE_ID, .app_device_id = ESP_ZB_HA_SIMPLE_SENSOR_DEVICE_ID, .app_device_version = 0};
+}
+
+bool ZigbeeAnalog::addAnalogInput() {
+  esp_err_t ret = esp_zb_cluster_list_add_analog_input_cluster(_cluster_list, esp_zb_analog_input_cluster_create(NULL), ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
+  if (ret != ESP_OK) {
+    log_e("Failed to add Analog Input cluster: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  _analog_clusters |= ANALOG_INPUT;
+  return true;
+}
+
+bool ZigbeeAnalog::addAnalogOutput() {
+  esp_err_t ret = esp_zb_cluster_list_add_analog_output_cluster(_cluster_list, esp_zb_analog_output_cluster_create(NULL), ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
+  if (ret != ESP_OK) {
+    log_e("Failed to add Analog Output cluster: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  _analog_clusters |= ANALOG_OUTPUT;
+  return true;
+}
+
+//set attribute method -> method overridden in child class
+void ZigbeeAnalog::zbAttributeSet(const esp_zb_zcl_set_attr_value_message_t *message) {
+  if (message->info.cluster == ESP_ZB_ZCL_CLUSTER_ID_ANALOG_OUTPUT) {
+    if (message->attribute.id == ESP_ZB_ZCL_ATTR_ANALOG_OUTPUT_PRESENT_VALUE_ID && message->attribute.data.type == ESP_ZB_ZCL_ATTR_TYPE_SINGLE) {
+      float analog_output = *(float *)message->attribute.data.value;
+      analogOutputChanged(analog_output);
+    } else {
+      log_w("Received message ignored. Attribute ID: %d not supported for Analog Output", message->attribute.id);
+    }
+  } else {
+    log_w("Received message ignored. Cluster ID: %d not supported for Analog endpoint", message->info.cluster);
+  }
+}
+
+void ZigbeeAnalog::analogOutputChanged(float analog_output) {
+  if (_on_analog_output_change) {
+    _on_analog_output_change(analog_output);
+  } else {
+    log_w("No callback function set for analog output change");
+  }
+}
+
+bool ZigbeeAnalog::setAnalogInput(float analog) {
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
+  if (!(_analog_clusters & ANALOG_INPUT)) {
+    log_e("Analog Input cluster not added");
+    return false;
+  }
+  log_d("Setting analog input to %.1f", analog);
+  esp_zb_lock_acquire(portMAX_DELAY);
+  ret = esp_zb_zcl_set_attribute_val(
+    _endpoint, ESP_ZB_ZCL_CLUSTER_ID_ANALOG_INPUT, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_ANALOG_INPUT_PRESENT_VALUE_ID, &analog, false
+  );
+  esp_zb_lock_release();
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set analog input: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    return false;
+  }
+  return true;
+}
+
+bool ZigbeeAnalog::reportAnalogInput() {
+  /* Send report attributes command */
+  esp_zb_zcl_report_attr_cmd_t report_attr_cmd;
+  report_attr_cmd.address_mode = ESP_ZB_APS_ADDR_MODE_DST_ADDR_ENDP_NOT_PRESENT;
+  report_attr_cmd.attributeID = ESP_ZB_ZCL_ATTR_ANALOG_INPUT_PRESENT_VALUE_ID;
+  report_attr_cmd.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_CLI;
+  report_attr_cmd.clusterID = ESP_ZB_ZCL_CLUSTER_ID_ANALOG_INPUT;
+  report_attr_cmd.zcl_basic_cmd.src_endpoint = _endpoint;
+  report_attr_cmd.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
+
+  esp_zb_lock_acquire(portMAX_DELAY);
+  esp_err_t ret = esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);
+  esp_zb_lock_release();
+  if (ret != ESP_OK) {
+    log_e("Failed to send Analog Input report: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  log_v("Analog Input report sent");
+  return true;
+}
+
+bool ZigbeeAnalog::setAnalogInputReporting(uint16_t min_interval, uint16_t max_interval, float delta) {
+  esp_zb_zcl_reporting_info_t reporting_info;
+  memset(&reporting_info, 0, sizeof(esp_zb_zcl_reporting_info_t));
+  reporting_info.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_SRV;
+  reporting_info.ep = _endpoint;
+  reporting_info.cluster_id = ESP_ZB_ZCL_CLUSTER_ID_ANALOG_INPUT;
+  reporting_info.cluster_role = ESP_ZB_ZCL_CLUSTER_SERVER_ROLE;
+  reporting_info.attr_id = ESP_ZB_ZCL_ATTR_ANALOG_INPUT_PRESENT_VALUE_ID;
+  reporting_info.u.send_info.min_interval = min_interval;
+  reporting_info.u.send_info.max_interval = max_interval;
+  reporting_info.u.send_info.def_min_interval = min_interval;
+  reporting_info.u.send_info.def_max_interval = max_interval;
+  reporting_info.u.send_info.delta.s32 = delta;
+  reporting_info.dst.profile_id = ESP_ZB_AF_HA_PROFILE_ID;
+  reporting_info.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
+
+  esp_zb_lock_acquire(portMAX_DELAY);
+  esp_err_t ret = esp_zb_zcl_update_reporting_info(&reporting_info);
+  esp_zb_lock_release();
+  if (ret != ESP_OK) {
+    log_e("Failed to set Analog Input reporting: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
+}
+
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeAnalog.h b/libraries/Zigbee/src/ep/ZigbeeAnalog.h
new file mode 100644
index 00000000000..03fbc678b6e
--- /dev/null
+++ b/libraries/Zigbee/src/ep/ZigbeeAnalog.h
@@ -0,0 +1,57 @@
+/* Class of Zigbee Analog sensor endpoint inherited from common EP class */
+
+#pragma once
+
+#include "soc/soc_caps.h"
+#include "sdkconfig.h"
+#if CONFIG_ZB_ENABLED
+
+#include "ZigbeeEP.h"
+#include "ha/esp_zigbee_ha_standard.h"
+
+//enum for bits set to check what analog cluster were added
+enum zigbee_analog_clusters {
+  ANALOG_INPUT = 1,
+  ANALOG_OUTPUT = 2
+};
+
+typedef struct zigbee_analog_cfg_s {
+  esp_zb_basic_cluster_cfg_t basic_cfg;
+  esp_zb_identify_cluster_cfg_t identify_cfg;
+  esp_zb_analog_output_cluster_cfg_t analog_output_cfg;
+  esp_zb_analog_input_cluster_cfg_t analog_input_cfg;
+} zigbee_analog_cfg_t;
+
+class ZigbeeAnalog : public ZigbeeEP {
+public:
+  ZigbeeAnalog(uint8_t endpoint);
+  ~ZigbeeAnalog() {}
+
+  // Add analog clusters
+  bool addAnalogInput();
+  bool addAnalogOutput();
+
+  // Use to set a cb function to be called on analog output change
+  void onAnalogOutputChange(void (*callback)(float analog)) {
+    _on_analog_output_change = callback;
+  }
+
+  // Set the analog input value
+  bool setAnalogInput(float analog);
+
+  // Report Analog Input value
+  bool reportAnalogInput();
+
+  // Set reporting for Analog Input
+  bool setAnalogInputReporting(uint16_t min_interval, uint16_t max_interval, float delta);
+
+private:
+  void zbAttributeSet(const esp_zb_zcl_set_attr_value_message_t *message) override;
+
+  void (*_on_analog_output_change)(float);
+  void analogOutputChanged(float analog_output);
+
+  uint8_t _analog_clusters;
+};
+
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeCarbonDioxideSensor.cpp b/libraries/Zigbee/src/ep/ZigbeeCarbonDioxideSensor.cpp
index b4386b80386..2b8271f09a9 100644
--- a/libraries/Zigbee/src/ep/ZigbeeCarbonDioxideSensor.cpp
+++ b/libraries/Zigbee/src/ep/ZigbeeCarbonDioxideSensor.cpp
@@ -1,5 +1,5 @@
 #include "ZigbeeCarbonDioxideSensor.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 esp_zb_cluster_list_t *zigbee_carbon_dioxide_sensor_clusters_create(zigbee_carbon_dioxide_sensor_cfg_t *carbon_dioxide_sensor) {
   esp_zb_basic_cluster_cfg_t *basic_cfg = carbon_dioxide_sensor ? &(carbon_dioxide_sensor->basic_cfg) : NULL;
@@ -24,26 +24,39 @@ ZigbeeCarbonDioxideSensor::ZigbeeCarbonDioxideSensor(uint8_t endpoint) : ZigbeeE
   _ep_config = {.endpoint = _endpoint, .app_profile_id = ESP_ZB_AF_HA_PROFILE_ID, .app_device_id = ESP_ZB_HA_SIMPLE_SENSOR_DEVICE_ID, .app_device_version = 0};
 }
 
-void ZigbeeCarbonDioxideSensor::setMinMaxValue(float min, float max) {
+bool ZigbeeCarbonDioxideSensor::setMinMaxValue(float min, float max) {
   float zb_min = min / 1000000.0f;
   float zb_max = max / 1000000.0f;
   esp_zb_attribute_list_t *carbon_dioxide_measure_cluster =
     esp_zb_cluster_list_get_cluster(_cluster_list, ESP_ZB_ZCL_CLUSTER_ID_CARBON_DIOXIDE_MEASUREMENT, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
-  esp_zb_cluster_update_attr(carbon_dioxide_measure_cluster, ESP_ZB_ZCL_ATTR_CARBON_DIOXIDE_MEASUREMENT_MIN_MEASURED_VALUE_ID, (void *)&zb_min);
-  esp_zb_cluster_update_attr(carbon_dioxide_measure_cluster, ESP_ZB_ZCL_ATTR_CARBON_DIOXIDE_MEASUREMENT_MAX_MEASURED_VALUE_ID, (void *)&zb_max);
+  esp_err_t ret = esp_zb_cluster_update_attr(carbon_dioxide_measure_cluster, ESP_ZB_ZCL_ATTR_CARBON_DIOXIDE_MEASUREMENT_MIN_MEASURED_VALUE_ID, (void *)&zb_min);
+  if (ret != ESP_OK) {
+    log_e("Failed to set min value: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  ret = esp_zb_cluster_update_attr(carbon_dioxide_measure_cluster, ESP_ZB_ZCL_ATTR_CARBON_DIOXIDE_MEASUREMENT_MAX_MEASURED_VALUE_ID, (void *)&zb_max);
+  if (ret != ESP_OK) {
+    log_e("Failed to set max value: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeeCarbonDioxideSensor::setTolerance(float tolerance) {
+bool ZigbeeCarbonDioxideSensor::setTolerance(float tolerance) {
   float zb_tolerance = tolerance / 1000000.0f;
   esp_zb_attribute_list_t *carbon_dioxide_measure_cluster =
     esp_zb_cluster_list_get_cluster(_cluster_list, ESP_ZB_ZCL_CLUSTER_ID_CARBON_DIOXIDE_MEASUREMENT, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
-  esp_zb_temperature_meas_cluster_add_attr(carbon_dioxide_measure_cluster, ESP_ZB_ZCL_ATTR_CARBON_DIOXIDE_MEASUREMENT_TOLERANCE_ID, (void *)&zb_tolerance);
+  esp_err_t ret = esp_zb_carbon_dioxide_measurement_cluster_add_attr(
+    carbon_dioxide_measure_cluster, ESP_ZB_ZCL_ATTR_CARBON_DIOXIDE_MEASUREMENT_TOLERANCE_ID, (void *)&zb_tolerance
+  );
+  if (ret != ESP_OK) {
+    log_e("Failed to set tolerance: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeeCarbonDioxideSensor::setReporting(uint16_t min_interval, uint16_t max_interval, uint16_t delta) {
-  if (delta > 0) {
-    log_e("Delta reporting is currently not supported by the carbon dioxide sensor");
-  }
+bool ZigbeeCarbonDioxideSensor::setReporting(uint16_t min_interval, uint16_t max_interval, uint16_t delta) {
   esp_zb_zcl_reporting_info_t reporting_info;
   memset(&reporting_info, 0, sizeof(esp_zb_zcl_reporting_info_t));
   reporting_info.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_SRV;
@@ -61,24 +74,35 @@ void ZigbeeCarbonDioxideSensor::setReporting(uint16_t min_interval, uint16_t max
   memcpy(&reporting_info.u.send_info.delta.s32, &delta_f, sizeof(float));
 
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_update_reporting_info(&reporting_info);
+  esp_err_t ret = esp_zb_zcl_update_reporting_info(&reporting_info);
   esp_zb_lock_release();
+  if (ret != ESP_OK) {
+    log_e("Failed to set reporting: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeeCarbonDioxideSensor::setCarbonDioxide(float carbon_dioxide) {
+bool ZigbeeCarbonDioxideSensor::setCarbonDioxide(float carbon_dioxide) {
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
   float zb_carbon_dioxide = carbon_dioxide / 1000000.0f;
   log_v("Updating carbon dioxide sensor value...");
   /* Update carbon dioxide sensor measured value */
   log_d("Setting carbon dioxide to %0.1f", carbon_dioxide);
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_set_attribute_val(
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_CARBON_DIOXIDE_MEASUREMENT, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_CARBON_DIOXIDE_MEASUREMENT_MEASURED_VALUE_ID,
     &zb_carbon_dioxide, false
   );
   esp_zb_lock_release();
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set carbon dioxide: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeeCarbonDioxideSensor::report() {
+bool ZigbeeCarbonDioxideSensor::report() {
   /* Send report attributes command */
   esp_zb_zcl_report_attr_cmd_t report_attr_cmd;
   report_attr_cmd.address_mode = ESP_ZB_APS_ADDR_MODE_DST_ADDR_ENDP_NOT_PRESENT;
@@ -86,11 +110,17 @@ void ZigbeeCarbonDioxideSensor::report() {
   report_attr_cmd.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_CLI;
   report_attr_cmd.clusterID = ESP_ZB_ZCL_CLUSTER_ID_CARBON_DIOXIDE_MEASUREMENT;
   report_attr_cmd.zcl_basic_cmd.src_endpoint = _endpoint;
+  report_attr_cmd.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
 
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);
+  esp_err_t ret = esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);
   esp_zb_lock_release();
+  if (ret != ESP_OK) {
+    log_e("Failed to send carbon dioxide report: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
   log_v("Carbon dioxide report sent");
+  return true;
 }
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeCarbonDioxideSensor.h b/libraries/Zigbee/src/ep/ZigbeeCarbonDioxideSensor.h
index 7744fd02f00..e0a6de48648 100644
--- a/libraries/Zigbee/src/ep/ZigbeeCarbonDioxideSensor.h
+++ b/libraries/Zigbee/src/ep/ZigbeeCarbonDioxideSensor.h
@@ -4,7 +4,7 @@
 
 #include "soc/soc_caps.h"
 #include "sdkconfig.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 #include "ZigbeeEP.h"
 #include "ha/esp_zigbee_ha_standard.h"
@@ -42,20 +42,20 @@ class ZigbeeCarbonDioxideSensor : public ZigbeeEP {
   ~ZigbeeCarbonDioxideSensor() {}
 
   // Set the carbon dioxide value in ppm
-  void setCarbonDioxide(float carbon_dioxide);
+  bool setCarbonDioxide(float carbon_dioxide);
 
   // Set the min and max value for the carbon dioxide sensor in ppm
-  void setMinMaxValue(float min, float max);
+  bool setMinMaxValue(float min, float max);
 
   // Set the tolerance value for the carbon dioxide sensor in ppm
-  void setTolerance(float tolerance);
+  bool setTolerance(float tolerance);
 
   // Set the reporting interval for carbon dioxide measurement in seconds and delta (carbon dioxide change in ppm)
   // NOTE: Delta reporting is currently not supported by the carbon dioxide sensor
-  void setReporting(uint16_t min_interval, uint16_t max_interval, uint16_t delta);
+  bool setReporting(uint16_t min_interval, uint16_t max_interval, uint16_t delta);
 
   // Report the carbon dioxide value
-  void report();
+  bool report();
 };
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeColorDimmableLight.cpp b/libraries/Zigbee/src/ep/ZigbeeColorDimmableLight.cpp
index 7ffd6976e1f..caac73b5c68 100644
--- a/libraries/Zigbee/src/ep/ZigbeeColorDimmableLight.cpp
+++ b/libraries/Zigbee/src/ep/ZigbeeColorDimmableLight.cpp
@@ -1,5 +1,5 @@
 #include "ZigbeeColorDimmableLight.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 ZigbeeColorDimmableLight::ZigbeeColorDimmableLight(uint8_t endpoint) : ZigbeeEP(endpoint) {
   _device_id = ESP_ZB_HA_COLOR_DIMMABLE_LIGHT_DEVICE_ID;
@@ -117,7 +117,8 @@ void ZigbeeColorDimmableLight::lightChanged() {
   }
 }
 
-void ZigbeeColorDimmableLight::setLight(bool state, uint8_t level, uint8_t red, uint8_t green, uint8_t blue) {
+bool ZigbeeColorDimmableLight::setLight(bool state, uint8_t level, uint8_t red, uint8_t green, uint8_t blue) {
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
   //Update all attributes
   _current_state = state;
   _current_level = level;
@@ -126,55 +127,83 @@ void ZigbeeColorDimmableLight::setLight(bool state, uint8_t level, uint8_t red,
 
   espXyColor_t xy_color = espRgbColorToXYColor(_current_color);
   espHsvColor_t hsv_color = espRgbColorToHsvColor(_current_color);
+  uint8_t hue = (uint8_t)hsv_color.h;
 
   log_v("Updating light state: %d, level: %d, color: %d, %d, %d", state, level, red, green, blue);
   /* Update light clusters */
   esp_zb_lock_acquire(portMAX_DELAY);
   //set on/off state
-  esp_zb_zcl_set_attribute_val(
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_ON_OFF, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_ON_OFF_ON_OFF_ID, &_current_state, false
   );
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set light state: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    goto unlock_and_return;
+  }
   //set level
-  esp_zb_zcl_set_attribute_val(
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_LEVEL_CONTROL, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_LEVEL_CONTROL_CURRENT_LEVEL_ID, &_current_level, false
   );
-  //set xy color
-  esp_zb_zcl_set_attribute_val(
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set light level: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    goto unlock_and_return;
+  }
+  //set x color
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_COLOR_CONTROL, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_COLOR_CONTROL_CURRENT_X_ID, &xy_color.x, false
   );
-  esp_zb_zcl_set_attribute_val(
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set light xy color: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    goto unlock_and_return;
+  }
+  //set y color
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_COLOR_CONTROL, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_COLOR_CONTROL_CURRENT_Y_ID, &xy_color.y, false
   );
-  //set hsv color
-  uint8_t hue = (uint8_t)hsv_color.h;
-  esp_zb_zcl_set_attribute_val(
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set light y color: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    goto unlock_and_return;
+  }
+  //set hue
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_COLOR_CONTROL, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_COLOR_CONTROL_CURRENT_HUE_ID, &hue, false
   );
-  esp_zb_zcl_set_attribute_val(
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set light hue: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    goto unlock_and_return;
+  }
+  //set saturation
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_COLOR_CONTROL, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_COLOR_CONTROL_CURRENT_SATURATION_ID, &hsv_color.s, false
   );
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set light saturation: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    goto unlock_and_return;
+  }
+unlock_and_return:
   esp_zb_lock_release();
+  return ret == ESP_ZB_ZCL_STATUS_SUCCESS;
 }
 
-void ZigbeeColorDimmableLight::setLightState(bool state) {
-  setLight(state, _current_level, _current_color.r, _current_color.g, _current_color.b);
+bool ZigbeeColorDimmableLight::setLightState(bool state) {
+  return setLight(state, _current_level, _current_color.r, _current_color.g, _current_color.b);
 }
 
-void ZigbeeColorDimmableLight::setLightLevel(uint8_t level) {
-  setLight(_current_state, level, _current_color.r, _current_color.g, _current_color.b);
+bool ZigbeeColorDimmableLight::setLightLevel(uint8_t level) {
+  return setLight(_current_state, level, _current_color.r, _current_color.g, _current_color.b);
 }
 
-void ZigbeeColorDimmableLight::setLightColor(uint8_t red, uint8_t green, uint8_t blue) {
-  setLight(_current_state, _current_level, red, green, blue);
+bool ZigbeeColorDimmableLight::setLightColor(uint8_t red, uint8_t green, uint8_t blue) {
+  return setLight(_current_state, _current_level, red, green, blue);
 }
 
-void ZigbeeColorDimmableLight::setLightColor(espRgbColor_t rgb_color) {
-  setLight(_current_state, _current_level, rgb_color.r, rgb_color.g, rgb_color.b);
+bool ZigbeeColorDimmableLight::setLightColor(espRgbColor_t rgb_color) {
+  return setLight(_current_state, _current_level, rgb_color.r, rgb_color.g, rgb_color.b);
 }
 
-void ZigbeeColorDimmableLight::setLightColor(espHsvColor_t hsv_color) {
+bool ZigbeeColorDimmableLight::setLightColor(espHsvColor_t hsv_color) {
   espRgbColor_t rgb_color = espHsvColorToRgbColor(hsv_color);
-  setLight(_current_state, _current_level, rgb_color.r, rgb_color.g, rgb_color.b);
+  return setLight(_current_state, _current_level, rgb_color.r, rgb_color.g, rgb_color.b);
 }
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeColorDimmableLight.h b/libraries/Zigbee/src/ep/ZigbeeColorDimmableLight.h
index 265fec1b37c..6681f213ad0 100644
--- a/libraries/Zigbee/src/ep/ZigbeeColorDimmableLight.h
+++ b/libraries/Zigbee/src/ep/ZigbeeColorDimmableLight.h
@@ -4,7 +4,7 @@
 
 #include "soc/soc_caps.h"
 #include "sdkconfig.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 #include "ZigbeeEP.h"
 #include "ha/esp_zigbee_ha_standard.h"
@@ -62,12 +62,12 @@ class ZigbeeColorDimmableLight : public ZigbeeEP {
     lightChanged();
   }
 
-  void setLightState(bool state);
-  void setLightLevel(uint8_t level);
-  void setLightColor(uint8_t red, uint8_t green, uint8_t blue);
-  void setLightColor(espRgbColor_t rgb_color);
-  void setLightColor(espHsvColor_t hsv_color);
-  void setLight(bool state, uint8_t level, uint8_t red, uint8_t green, uint8_t blue);
+  bool setLightState(bool state);
+  bool setLightLevel(uint8_t level);
+  bool setLightColor(uint8_t red, uint8_t green, uint8_t blue);
+  bool setLightColor(espRgbColor_t rgb_color);
+  bool setLightColor(espHsvColor_t hsv_color);
+  bool setLight(bool state, uint8_t level, uint8_t red, uint8_t green, uint8_t blue);
 
   bool getLightState() {
     return _current_state;
@@ -105,4 +105,4 @@ class ZigbeeColorDimmableLight : public ZigbeeEP {
   espRgbColor_t _current_color;
 };
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeColorDimmerSwitch.cpp b/libraries/Zigbee/src/ep/ZigbeeColorDimmerSwitch.cpp
index 7bdd8b8ad6a..68f287153cb 100644
--- a/libraries/Zigbee/src/ep/ZigbeeColorDimmerSwitch.cpp
+++ b/libraries/Zigbee/src/ep/ZigbeeColorDimmerSwitch.cpp
@@ -1,5 +1,5 @@
 #include "ZigbeeColorDimmerSwitch.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 // Initialize the static instance pointer
 ZigbeeColorDimmerSwitch *ZigbeeColorDimmerSwitch::_instance = nullptr;
@@ -481,4 +481,4 @@ void ZigbeeColorDimmerSwitch::setLightColor(uint8_t red, uint8_t green, uint8_t
   }
 }
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeColorDimmerSwitch.h b/libraries/Zigbee/src/ep/ZigbeeColorDimmerSwitch.h
index ca67fb4ba62..dbe50a20230 100644
--- a/libraries/Zigbee/src/ep/ZigbeeColorDimmerSwitch.h
+++ b/libraries/Zigbee/src/ep/ZigbeeColorDimmerSwitch.h
@@ -4,7 +4,7 @@
 
 #include "soc/soc_caps.h"
 #include "sdkconfig.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 #include "ZigbeeEP.h"
 #include "ha/esp_zigbee_ha_standard.h"
@@ -55,4 +55,4 @@ class ZigbeeColorDimmerSwitch : public ZigbeeEP {
   void calculateXY(uint8_t red, uint8_t green, uint8_t blue, uint16_t &x, uint16_t &y);
 };
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeContactSwitch.cpp b/libraries/Zigbee/src/ep/ZigbeeContactSwitch.cpp
index 9a3551b0581..ced8e43d6ea 100644
--- a/libraries/Zigbee/src/ep/ZigbeeContactSwitch.cpp
+++ b/libraries/Zigbee/src/ep/ZigbeeContactSwitch.cpp
@@ -1,5 +1,5 @@
 #include "ZigbeeContactSwitch.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 esp_zb_cluster_list_t *zigbee_contact_switch_clusters_create(zigbee_contact_switch_cfg_t *contact_switch) {
   esp_zb_basic_cluster_cfg_t *basic_cfg = contact_switch ? &(contact_switch->basic_cfg) : NULL;
@@ -29,29 +29,39 @@ void ZigbeeContactSwitch::setIASClientEndpoint(uint8_t ep_number) {
   _ias_cie_endpoint = ep_number;
 }
 
-void ZigbeeContactSwitch::setClosed() {
+bool ZigbeeContactSwitch::setClosed() {
   log_v("Setting Contact switch to closed");
   uint8_t closed = 0;  // ALARM1 = 0, ALARM2 = 0
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_set_attribute_val(
+  esp_err_t ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_IAS_ZONE, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_IAS_ZONE_ZONESTATUS_ID, &closed, false
   );
   esp_zb_lock_release();
+  if (ret != ESP_OK) {
+    log_e("Failed to set contact switch to closed: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
   _zone_status = closed;
-  report();
+  return report();
 }
 
-void ZigbeeContactSwitch::setOpen() {
+bool ZigbeeContactSwitch::setOpen() {
   log_v("Setting Contact switch to open");
   uint8_t open = ESP_ZB_ZCL_IAS_ZONE_ZONE_STATUS_ALARM1 | ESP_ZB_ZCL_IAS_ZONE_ZONE_STATUS_ALARM2;  // ALARM1 = 1, ALARM2 = 1
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_set_attribute_val(_endpoint, ESP_ZB_ZCL_CLUSTER_ID_IAS_ZONE, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_IAS_ZONE_ZONESTATUS_ID, &open, false);
+  esp_err_t ret = esp_zb_zcl_set_attribute_val(
+    _endpoint, ESP_ZB_ZCL_CLUSTER_ID_IAS_ZONE, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_IAS_ZONE_ZONESTATUS_ID, &open, false
+  );
   esp_zb_lock_release();
+  if (ret != ESP_OK) {
+    log_e("Failed to set contact switch to open: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
   _zone_status = open;
-  report();
+  return report();
 }
 
-void ZigbeeContactSwitch::report() {
+bool ZigbeeContactSwitch::report() {
   /* Send IAS Zone status changed notification command */
 
   esp_zb_zcl_ias_zone_status_change_notif_cmd_t status_change_notif_cmd;
@@ -66,9 +76,14 @@ void ZigbeeContactSwitch::report() {
   status_change_notif_cmd.delay = 0;
 
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_ias_zone_status_change_notif_cmd_req(&status_change_notif_cmd);
+  esp_err_t ret = esp_zb_zcl_ias_zone_status_change_notif_cmd_req(&status_change_notif_cmd);
   esp_zb_lock_release();
+  if (ret != ESP_OK) {
+    log_e("Failed to send IAS Zone status changed notification: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
   log_v("IAS Zone status changed notification sent");
+  return true;
 }
 
 void ZigbeeContactSwitch::zbIASZoneEnrollResponse(const esp_zb_zcl_ias_zone_enroll_response_message_t *message) {
@@ -93,4 +108,4 @@ void ZigbeeContactSwitch::zbIASZoneEnrollResponse(const esp_zb_zcl_ias_zone_enro
   }
 }
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeContactSwitch.h b/libraries/Zigbee/src/ep/ZigbeeContactSwitch.h
index 692caf092ba..b33effd8dfc 100644
--- a/libraries/Zigbee/src/ep/ZigbeeContactSwitch.h
+++ b/libraries/Zigbee/src/ep/ZigbeeContactSwitch.h
@@ -4,7 +4,7 @@
 
 #include "soc/soc_caps.h"
 #include "sdkconfig.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 #include "ZigbeeEP.h"
 #include "ha/esp_zigbee_ha_standard.h"
@@ -48,13 +48,13 @@ class ZigbeeContactSwitch : public ZigbeeEP {
   void setIASClientEndpoint(uint8_t ep_number);
 
   // Set the contact switch value to closed
-  void setClosed();
+  bool setClosed();
 
   // Set the contact switch value to open
-  void setOpen();
+  bool setOpen();
 
   // Report the contact switch value, done automatically after setting the position
-  void report();
+  bool report();
 
 private:
   void zbIASZoneEnrollResponse(const esp_zb_zcl_ias_zone_enroll_response_message_t *message) override;
@@ -64,4 +64,4 @@ class ZigbeeContactSwitch : public ZigbeeEP {
   uint8_t _ias_cie_endpoint;
 };
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeDimmableLight.cpp b/libraries/Zigbee/src/ep/ZigbeeDimmableLight.cpp
index 00d3aac3752..05a7e5ad6c1 100644
--- a/libraries/Zigbee/src/ep/ZigbeeDimmableLight.cpp
+++ b/libraries/Zigbee/src/ep/ZigbeeDimmableLight.cpp
@@ -1,6 +1,5 @@
-
 #include "ZigbeeDimmableLight.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 #include "esp_zigbee_cluster.h"
 
@@ -52,7 +51,8 @@ void ZigbeeDimmableLight::lightChanged() {
   }
 }
 
-void ZigbeeDimmableLight::setLight(bool state, uint8_t level) {
+bool ZigbeeDimmableLight::setLight(bool state, uint8_t level) {
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
   // Update all attributes
   _current_state = state;
   _current_level = level;
@@ -62,22 +62,32 @@ void ZigbeeDimmableLight::setLight(bool state, uint8_t level) {
   /* Update light clusters */
   esp_zb_lock_acquire(portMAX_DELAY);
   // set on/off state
-  esp_zb_zcl_set_attribute_val(
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_ON_OFF, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_ON_OFF_ON_OFF_ID, &_current_state, false
   );
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set light state: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    goto unlock_and_return;
+  }
   // set level
-  esp_zb_zcl_set_attribute_val(
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_LEVEL_CONTROL, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_LEVEL_CONTROL_CURRENT_LEVEL_ID, &_current_level, false
   );
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set light level: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    goto unlock_and_return;
+  }
+unlock_and_return:
   esp_zb_lock_release();
+  return ret == ESP_ZB_ZCL_STATUS_SUCCESS;
 }
 
-void ZigbeeDimmableLight::setLightState(bool state) {
-  setLight(state, _current_level);
+bool ZigbeeDimmableLight::setLightState(bool state) {
+  return setLight(state, _current_level);
 }
 
-void ZigbeeDimmableLight::setLightLevel(uint8_t level) {
-  setLight(_current_state, level);
+bool ZigbeeDimmableLight::setLightLevel(uint8_t level) {
+  return setLight(_current_state, level);
 }
 
 esp_zb_cluster_list_t *ZigbeeDimmableLight::zigbee_dimmable_light_clusters_create(zigbee_dimmable_light_cfg_t *light_cfg) {
diff --git a/libraries/Zigbee/src/ep/ZigbeeDimmableLight.h b/libraries/Zigbee/src/ep/ZigbeeDimmableLight.h
index 6f92c3315e4..747fdbafaef 100644
--- a/libraries/Zigbee/src/ep/ZigbeeDimmableLight.h
+++ b/libraries/Zigbee/src/ep/ZigbeeDimmableLight.h
@@ -4,7 +4,7 @@
 
 #include "soc/soc_caps.h"
 #include "sdkconfig.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 #include "ZigbeeEP.h"
 #include "ha/esp_zigbee_ha_standard.h"
@@ -76,9 +76,9 @@ class ZigbeeDimmableLight : public ZigbeeEP {
     lightChanged();
   }
 
-  void setLightState(bool state);
-  void setLightLevel(uint8_t level);
-  void setLight(bool state, uint8_t level);
+  bool setLightState(bool state);
+  bool setLightLevel(uint8_t level);
+  bool setLight(bool state, uint8_t level);
 
   bool getLightState() {
     return _current_state;
@@ -89,7 +89,6 @@ class ZigbeeDimmableLight : public ZigbeeEP {
 
 private:
   void zbAttributeSet(const esp_zb_zcl_set_attr_value_message_t *message) override;
-
   void lightChanged();
   // callback function to be called on light change (State, Level)
   void (*_on_light_change)(bool, uint8_t);
diff --git a/libraries/Zigbee/src/ep/ZigbeeDoorWindowHandle.cpp b/libraries/Zigbee/src/ep/ZigbeeDoorWindowHandle.cpp
index 364b3ef6d9d..c5b62ee2b75 100644
--- a/libraries/Zigbee/src/ep/ZigbeeDoorWindowHandle.cpp
+++ b/libraries/Zigbee/src/ep/ZigbeeDoorWindowHandle.cpp
@@ -1,5 +1,5 @@
 #include "ZigbeeDoorWindowHandle.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 esp_zb_cluster_list_t *zigbee_door_window_handle_clusters_create(zigbee_door_window_handle_cfg_t *door_window_handle) {
   esp_zb_basic_cluster_cfg_t *basic_cfg = door_window_handle ? &(door_window_handle->basic_cfg) : NULL;
@@ -29,41 +29,58 @@ void ZigbeeDoorWindowHandle::setIASClientEndpoint(uint8_t ep_number) {
   _ias_cie_endpoint = ep_number;
 }
 
-void ZigbeeDoorWindowHandle::setClosed() {
+bool ZigbeeDoorWindowHandle::setClosed() {
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
   log_v("Setting Door/Window handle to closed");
   uint8_t closed = 0;  // ALARM1 = 0, ALARM2 = 0
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_set_attribute_val(
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_IAS_ZONE, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_IAS_ZONE_ZONESTATUS_ID, &closed, false
   );
   esp_zb_lock_release();
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set door/window handle to closed: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    return false;
+  }
   _zone_status = closed;
-  report();
+  return report();
 }
 
-void ZigbeeDoorWindowHandle::setOpen() {
+bool ZigbeeDoorWindowHandle::setOpen() {
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
   log_v("Setting Door/Window handle to open");
   uint8_t open = ESP_ZB_ZCL_IAS_ZONE_ZONE_STATUS_ALARM1 | ESP_ZB_ZCL_IAS_ZONE_ZONE_STATUS_ALARM2;  // ALARM1 = 1, ALARM2 = 1
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_set_attribute_val(_endpoint, ESP_ZB_ZCL_CLUSTER_ID_IAS_ZONE, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_IAS_ZONE_ZONESTATUS_ID, &open, false);
+  ret = esp_zb_zcl_set_attribute_val(
+    _endpoint, ESP_ZB_ZCL_CLUSTER_ID_IAS_ZONE, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_IAS_ZONE_ZONESTATUS_ID, &open, false
+  );
   esp_zb_lock_release();
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set door/window handle to open: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    return false;
+  }
   _zone_status = open;
-  report();
+  return report();
 }
 
-void ZigbeeDoorWindowHandle::setTilted() {
+bool ZigbeeDoorWindowHandle::setTilted() {
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
   log_v("Setting Door/Window handle to tilted");
   uint8_t tilted = ESP_ZB_ZCL_IAS_ZONE_ZONE_STATUS_ALARM1;  // ALARM1 = 1, ALARM2 = 0
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_set_attribute_val(
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_IAS_ZONE, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_IAS_ZONE_ZONESTATUS_ID, &tilted, false
   );
   esp_zb_lock_release();
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set door/window handle to tilted: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    return false;
+  }
   _zone_status = tilted;
-  report();
+  return report();
 }
 
-void ZigbeeDoorWindowHandle::report() {
+bool ZigbeeDoorWindowHandle::report() {
   /* Send IAS Zone status changed notification command */
 
   esp_zb_zcl_ias_zone_status_change_notif_cmd_t status_change_notif_cmd;
@@ -77,10 +94,12 @@ void ZigbeeDoorWindowHandle::report() {
   status_change_notif_cmd.zone_id = _zone_id;
   status_change_notif_cmd.delay = 0;
 
+  //NOTE: Check result of esp_zb_zcl_ias_zone_status_change_notif_cmd_req() and return true if success, false if failure
   esp_zb_lock_acquire(portMAX_DELAY);
   esp_zb_zcl_ias_zone_status_change_notif_cmd_req(&status_change_notif_cmd);
   esp_zb_lock_release();
   log_v("IAS Zone status changed notification sent");
+  return true;
 }
 
 void ZigbeeDoorWindowHandle::zbIASZoneEnrollResponse(const esp_zb_zcl_ias_zone_enroll_response_message_t *message) {
@@ -105,4 +124,4 @@ void ZigbeeDoorWindowHandle::zbIASZoneEnrollResponse(const esp_zb_zcl_ias_zone_e
   }
 }
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeDoorWindowHandle.h b/libraries/Zigbee/src/ep/ZigbeeDoorWindowHandle.h
index e60316f8764..efffd34b12f 100644
--- a/libraries/Zigbee/src/ep/ZigbeeDoorWindowHandle.h
+++ b/libraries/Zigbee/src/ep/ZigbeeDoorWindowHandle.h
@@ -4,7 +4,7 @@
 
 #include "soc/soc_caps.h"
 #include "sdkconfig.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 #include "ZigbeeEP.h"
 #include "ha/esp_zigbee_ha_standard.h"
@@ -49,16 +49,16 @@ class ZigbeeDoorWindowHandle : public ZigbeeEP {
   void setIASClientEndpoint(uint8_t ep_number);
 
   // Set the door/window handle value to closed
-  void setClosed();
+  bool setClosed();
 
   // Set the door/window handle value to open
-  void setOpen();
+  bool setOpen();
 
   // Set the door/window handle value to tilted
-  void setTilted();
+  bool setTilted();
 
   // Report the door/window handle value, done automatically after setting the position
-  void report();
+  bool report();
 
 private:
   void zbIASZoneEnrollResponse(const esp_zb_zcl_ias_zone_enroll_response_message_t *message) override;
@@ -68,4 +68,4 @@ class ZigbeeDoorWindowHandle : public ZigbeeEP {
   uint8_t _ias_cie_endpoint;
 };
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeFlowSensor.cpp b/libraries/Zigbee/src/ep/ZigbeeFlowSensor.cpp
index 36d66840967..8a60af5a8e1 100644
--- a/libraries/Zigbee/src/ep/ZigbeeFlowSensor.cpp
+++ b/libraries/Zigbee/src/ep/ZigbeeFlowSensor.cpp
@@ -1,5 +1,5 @@
 #include "ZigbeeFlowSensor.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 esp_zb_cluster_list_t *zigbee_flow_sensor_clusters_create(zigbee_flow_sensor_cfg_t *flow_sensor) {
   esp_zb_basic_cluster_cfg_t *basic_cfg = flow_sensor ? &(flow_sensor->basic_cfg) : NULL;
@@ -22,24 +22,37 @@ ZigbeeFlowSensor::ZigbeeFlowSensor(uint8_t endpoint) : ZigbeeEP(endpoint) {
   _ep_config = {.endpoint = _endpoint, .app_profile_id = ESP_ZB_AF_HA_PROFILE_ID, .app_device_id = ESP_ZB_HA_SIMPLE_SENSOR_DEVICE_ID, .app_device_version = 0};
 }
 
-void ZigbeeFlowSensor::setMinMaxValue(float min, float max) {
+bool ZigbeeFlowSensor::setMinMaxValue(float min, float max) {
   uint16_t zb_min = (uint16_t)(min * 10);
   uint16_t zb_max = (uint16_t)(max * 10);
   esp_zb_attribute_list_t *flow_measure_cluster =
     esp_zb_cluster_list_get_cluster(_cluster_list, ESP_ZB_ZCL_CLUSTER_ID_FLOW_MEASUREMENT, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
-  esp_zb_cluster_update_attr(flow_measure_cluster, ESP_ZB_ZCL_ATTR_FLOW_MEASUREMENT_MIN_VALUE_ID, (void *)&zb_min);
-  esp_zb_cluster_update_attr(flow_measure_cluster, ESP_ZB_ZCL_ATTR_FLOW_MEASUREMENT_MAX_VALUE_ID, (void *)&zb_max);
+  esp_err_t ret = esp_zb_cluster_update_attr(flow_measure_cluster, ESP_ZB_ZCL_ATTR_FLOW_MEASUREMENT_MIN_VALUE_ID, (void *)&zb_min);
+  if (ret != ESP_OK) {
+    log_e("Failed to set min value: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  ret = esp_zb_cluster_update_attr(flow_measure_cluster, ESP_ZB_ZCL_ATTR_FLOW_MEASUREMENT_MAX_VALUE_ID, (void *)&zb_max);
+  if (ret != ESP_OK) {
+    log_e("Failed to set max value: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeeFlowSensor::setTolerance(float tolerance) {
-  // Convert tolerance to ZCL uint16_t
+bool ZigbeeFlowSensor::setTolerance(float tolerance) {
   uint16_t zb_tolerance = (uint16_t)(tolerance * 10);
   esp_zb_attribute_list_t *flow_measure_cluster =
     esp_zb_cluster_list_get_cluster(_cluster_list, ESP_ZB_ZCL_CLUSTER_ID_FLOW_MEASUREMENT, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
-  esp_zb_flow_meas_cluster_add_attr(flow_measure_cluster, ESP_ZB_ZCL_ATTR_FLOW_MEASUREMENT_TOLERANCE_ID, (void *)&zb_tolerance);
+  esp_err_t ret = esp_zb_flow_meas_cluster_add_attr(flow_measure_cluster, ESP_ZB_ZCL_ATTR_FLOW_MEASUREMENT_TOLERANCE_ID, (void *)&zb_tolerance);
+  if (ret != ESP_OK) {
+    log_e("Failed to set tolerance: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeeFlowSensor::setReporting(uint16_t min_interval, uint16_t max_interval, float delta) {
+bool ZigbeeFlowSensor::setReporting(uint16_t min_interval, uint16_t max_interval, float delta) {
   esp_zb_zcl_reporting_info_t reporting_info;
   memset(&reporting_info, 0, sizeof(esp_zb_zcl_reporting_info_t));
   reporting_info.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_SRV;
@@ -54,24 +67,39 @@ void ZigbeeFlowSensor::setReporting(uint16_t min_interval, uint16_t max_interval
   reporting_info.u.send_info.delta.u16 = (uint16_t)(delta * 10);  // Convert delta to ZCL uint16_t
   reporting_info.dst.profile_id = ESP_ZB_AF_HA_PROFILE_ID;
   reporting_info.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
+
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_update_reporting_info(&reporting_info);
+  esp_err_t ret = esp_zb_zcl_update_reporting_info(&reporting_info);
   esp_zb_lock_release();
+
+  if (ret != ESP_OK) {
+    log_e("Failed to set reporting: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeeFlowSensor::setFlow(float flow) {
+bool ZigbeeFlowSensor::setFlow(float flow) {
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
   uint16_t zb_flow = (uint16_t)(flow * 10);
   log_v("Updating flow sensor value...");
   /* Update temperature sensor measured value */
   log_d("Setting flow to %d", zb_flow);
+
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_set_attribute_val(
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_FLOW_MEASUREMENT, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_FLOW_MEASUREMENT_VALUE_ID, &zb_flow, false
   );
   esp_zb_lock_release();
+
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set flow value: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeeFlowSensor::report() {
+bool ZigbeeFlowSensor::report() {
   /* Send report attributes command */
   esp_zb_zcl_report_attr_cmd_t report_attr_cmd;
   report_attr_cmd.address_mode = ESP_ZB_APS_ADDR_MODE_DST_ADDR_ENDP_NOT_PRESENT;
@@ -79,11 +107,18 @@ void ZigbeeFlowSensor::report() {
   report_attr_cmd.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_CLI;
   report_attr_cmd.clusterID = ESP_ZB_ZCL_CLUSTER_ID_FLOW_MEASUREMENT;
   report_attr_cmd.zcl_basic_cmd.src_endpoint = _endpoint;
+  report_attr_cmd.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
 
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);
+  esp_err_t ret = esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);
   esp_zb_lock_release();
+
+  if (ret != ESP_OK) {
+    log_e("Failed to send flow report: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
   log_v("Flow report sent");
+  return true;
 }
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeFlowSensor.h b/libraries/Zigbee/src/ep/ZigbeeFlowSensor.h
index 7d5ec26f7ec..fa16b4a5636 100644
--- a/libraries/Zigbee/src/ep/ZigbeeFlowSensor.h
+++ b/libraries/Zigbee/src/ep/ZigbeeFlowSensor.h
@@ -4,7 +4,7 @@
 
 #include "soc/soc_caps.h"
 #include "sdkconfig.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 #include "ZigbeeEP.h"
 #include "ha/esp_zigbee_ha_standard.h"
@@ -42,19 +42,19 @@ class ZigbeeFlowSensor : public ZigbeeEP {
   ~ZigbeeFlowSensor() {}
 
   // Set the flow value in 0,1 m3/h
-  void setFlow(float value);
+  bool setFlow(float value);
 
   // Set the min and max value for the flow sensor in 0,1 m3/h
-  void setMinMaxValue(float min, float max);
+  bool setMinMaxValue(float min, float max);
 
   // Set the tolerance value for the flow sensor in 0,01 m3/h
-  void setTolerance(float tolerance);
+  bool setTolerance(float tolerance);
 
   // Set the reporting interval for flow measurement in seconds and delta (temp change in 0,1 m3/h)
-  void setReporting(uint16_t min_interval, uint16_t max_interval, float delta);
+  bool setReporting(uint16_t min_interval, uint16_t max_interval, float delta);
 
   // Report the flow value
-  void report();
+  bool report();
 };
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeGateway.cpp b/libraries/Zigbee/src/ep/ZigbeeGateway.cpp
new file mode 100644
index 00000000000..b0be81395ca
--- /dev/null
+++ b/libraries/Zigbee/src/ep/ZigbeeGateway.cpp
@@ -0,0 +1,15 @@
+#include "ZigbeeGateway.h"
+#if CONFIG_ZB_ENABLED
+
+ZigbeeGateway::ZigbeeGateway(uint8_t endpoint) : ZigbeeEP(endpoint) {
+  _device_id = ESP_ZB_HA_HOME_GATEWAY_DEVICE_ID;
+
+  _cluster_list = esp_zb_zcl_cluster_list_create();
+  esp_zb_cluster_list_add_basic_cluster(_cluster_list, esp_zb_basic_cluster_create(NULL), ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
+  esp_zb_cluster_list_add_identify_cluster(_cluster_list, esp_zb_identify_cluster_create(NULL), ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
+  esp_zb_cluster_list_add_identify_cluster(_cluster_list, esp_zb_zcl_attr_list_create(ESP_ZB_ZCL_CLUSTER_ID_IDENTIFY), ESP_ZB_ZCL_CLUSTER_CLIENT_ROLE);
+
+  _ep_config = {.endpoint = _endpoint, .app_profile_id = ESP_ZB_AF_HA_PROFILE_ID, .app_device_id = ESP_ZB_HA_HOME_GATEWAY_DEVICE_ID, .app_device_version = 0};
+}
+
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeGateway.h b/libraries/Zigbee/src/ep/ZigbeeGateway.h
new file mode 100644
index 00000000000..3925630c0b8
--- /dev/null
+++ b/libraries/Zigbee/src/ep/ZigbeeGateway.h
@@ -0,0 +1,18 @@
+/* Class of Zigbee Gateway endpoint inherited from common EP class */
+
+#pragma once
+
+#include "soc/soc_caps.h"
+#include "sdkconfig.h"
+#if CONFIG_ZB_ENABLED
+
+#include "ZigbeeEP.h"
+#include "ha/esp_zigbee_ha_standard.h"
+
+class ZigbeeGateway : public ZigbeeEP {
+public:
+  ZigbeeGateway(uint8_t endpoint);
+  ~ZigbeeGateway() {}
+};
+
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeIlluminanceSensor.cpp b/libraries/Zigbee/src/ep/ZigbeeIlluminanceSensor.cpp
new file mode 100644
index 00000000000..f1661c3a026
--- /dev/null
+++ b/libraries/Zigbee/src/ep/ZigbeeIlluminanceSensor.cpp
@@ -0,0 +1,106 @@
+#include "ZigbeeIlluminanceSensor.h"
+#if CONFIG_ZB_ENABLED
+
+ZigbeeIlluminanceSensor::ZigbeeIlluminanceSensor(uint8_t endpoint) : ZigbeeEP(endpoint) {
+  _device_id = ESP_ZB_HA_LIGHT_SENSOR_DEVICE_ID;
+
+  esp_zb_light_sensor_cfg_t light_sensor_cfg = ZIGBEE_DEFAULT_ILLUMINANCE_SENSOR_CONFIG();
+  _cluster_list = esp_zb_light_sensor_clusters_create(&light_sensor_cfg);
+
+  _ep_config = {.endpoint = _endpoint, .app_profile_id = ESP_ZB_AF_HA_PROFILE_ID, .app_device_id = ESP_ZB_HA_LIGHT_SENSOR_DEVICE_ID, .app_device_version = 0};
+}
+
+bool ZigbeeIlluminanceSensor::setMinMaxValue(uint16_t min, uint16_t max) {
+  esp_zb_attribute_list_t *light_measure_cluster =
+    esp_zb_cluster_list_get_cluster(_cluster_list, ESP_ZB_ZCL_CLUSTER_ID_ILLUMINANCE_MEASUREMENT, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
+  esp_err_t ret = esp_zb_cluster_update_attr(light_measure_cluster, ESP_ZB_ZCL_ATTR_ILLUMINANCE_MEASUREMENT_MIN_MEASURED_VALUE_ID, (void *)&min);
+  if (ret != ESP_OK) {
+    log_e("Failed to set min value: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  ret = esp_zb_cluster_update_attr(light_measure_cluster, ESP_ZB_ZCL_ATTR_ILLUMINANCE_MEASUREMENT_MAX_MEASURED_VALUE_ID, (void *)&max);
+  if (ret != ESP_OK) {
+    log_e("Failed to set max value: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
+}
+
+bool ZigbeeIlluminanceSensor::setTolerance(uint16_t tolerance) {
+  esp_zb_attribute_list_t *light_measure_cluster =
+    esp_zb_cluster_list_get_cluster(_cluster_list, ESP_ZB_ZCL_CLUSTER_ID_ILLUMINANCE_MEASUREMENT, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
+  esp_err_t ret = esp_zb_illuminance_meas_cluster_add_attr(light_measure_cluster, ESP_ZB_ZCL_ATTR_ILLUMINANCE_MEASUREMENT_TOLERANCE_ID, (void *)&tolerance);
+  if (ret != ESP_OK) {
+    log_e("Failed to set tolerance: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
+}
+
+bool ZigbeeIlluminanceSensor::setReporting(uint16_t min_interval, uint16_t max_interval, uint16_t delta) {
+  esp_zb_zcl_reporting_info_t reporting_info;
+  memset(&reporting_info, 0, sizeof(esp_zb_zcl_reporting_info_t));
+  reporting_info.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_SRV;
+  reporting_info.ep = _endpoint;
+  reporting_info.cluster_id = ESP_ZB_ZCL_CLUSTER_ID_ILLUMINANCE_MEASUREMENT;
+  reporting_info.cluster_role = ESP_ZB_ZCL_CLUSTER_SERVER_ROLE;
+  reporting_info.attr_id = ESP_ZB_ZCL_ATTR_ILLUMINANCE_MEASUREMENT_MEASURED_VALUE_ID;
+  reporting_info.u.send_info.min_interval = min_interval;
+  reporting_info.u.send_info.max_interval = max_interval;
+  reporting_info.u.send_info.def_min_interval = min_interval;
+  reporting_info.u.send_info.def_max_interval = max_interval;
+  reporting_info.u.send_info.delta.u16 = delta;
+  reporting_info.dst.profile_id = ESP_ZB_AF_HA_PROFILE_ID;
+  reporting_info.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
+
+  esp_zb_lock_acquire(portMAX_DELAY);
+  esp_err_t ret = esp_zb_zcl_update_reporting_info(&reporting_info);
+  esp_zb_lock_release();
+
+  if (ret != ESP_OK) {
+    log_e("Failed to set reporting: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
+}
+
+bool ZigbeeIlluminanceSensor::setIlluminance(uint16_t illuminanceValue) {
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
+  log_v("Updating Illuminance...");
+  /* Update illuminance sensor measured illuminance */
+  log_d("Setting Illuminance to %d", illuminanceValue);
+  esp_zb_lock_acquire(portMAX_DELAY);
+  ret = esp_zb_zcl_set_attribute_val(
+    _endpoint, ESP_ZB_ZCL_CLUSTER_ID_ILLUMINANCE_MEASUREMENT, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_ILLUMINANCE_MEASUREMENT_MEASURED_VALUE_ID,
+    &illuminanceValue, false
+  );
+  esp_zb_lock_release();
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set illuminance: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    return false;
+  }
+  return true;
+}
+
+bool ZigbeeIlluminanceSensor::report() {
+  /* Send report attributes command */
+  esp_zb_zcl_report_attr_cmd_t report_attr_cmd;
+  report_attr_cmd.address_mode = ESP_ZB_APS_ADDR_MODE_DST_ADDR_ENDP_NOT_PRESENT;
+  report_attr_cmd.attributeID = ESP_ZB_ZCL_ATTR_ILLUMINANCE_MEASUREMENT_MEASURED_VALUE_ID;
+  report_attr_cmd.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_CLI;
+  report_attr_cmd.clusterID = ESP_ZB_ZCL_CLUSTER_ID_ILLUMINANCE_MEASUREMENT;
+  report_attr_cmd.zcl_basic_cmd.src_endpoint = _endpoint;
+  report_attr_cmd.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
+
+  esp_zb_lock_acquire(portMAX_DELAY);
+  esp_err_t ret = esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);
+  esp_zb_lock_release();
+  if (ret != ESP_OK) {
+    log_e("Failed to send illuminance report: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  log_v("Illuminance report sent");
+  return true;
+}
+
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeIlluminanceSensor.h b/libraries/Zigbee/src/ep/ZigbeeIlluminanceSensor.h
new file mode 100644
index 00000000000..133dfc315db
--- /dev/null
+++ b/libraries/Zigbee/src/ep/ZigbeeIlluminanceSensor.h
@@ -0,0 +1,51 @@
+/* Class of Zigbee Illuminance sensor endpoint inherited from common EP class */
+
+#pragma once
+
+#include "soc/soc_caps.h"
+#include "sdkconfig.h"
+#if CONFIG_ZB_ENABLED
+
+#include "ZigbeeEP.h"
+#include "ha/esp_zigbee_ha_standard.h"
+
+#define ZIGBEE_DEFAULT_ILLUMINANCE_SENSOR_CONFIG()                                          \
+  {                                                                                         \
+    .basic_cfg =                                                                            \
+      {                                                                                     \
+        .zcl_version = ESP_ZB_ZCL_BASIC_ZCL_VERSION_DEFAULT_VALUE,                          \
+        .power_source = ESP_ZB_ZCL_BASIC_POWER_SOURCE_DEFAULT_VALUE,                        \
+      },                                                                                    \
+    .identify_cfg =                                                                         \
+      {                                                                                     \
+        .identify_time = ESP_ZB_ZCL_IDENTIFY_IDENTIFY_TIME_DEFAULT_VALUE,                   \
+      },                                                                                    \
+    .illuminance_cfg = {                                                                    \
+      .measured_value = ESP_ZB_ZCL_ILLUMINANCE_MEASUREMENT_LIGHT_SENSOR_TYPE_DEFAULT_VALUE, \
+      .min_value = ESP_ZB_ZCL_ATTR_ILLUMINANCE_MEASUREMENT_MIN_MEASURED_VALUE_MIN_VALUE,    \
+      .max_value = ESP_ZB_ZCL_ATTR_ILLUMINANCE_MEASUREMENT_MAX_MEASURED_VALUE_MAX_VALUE,    \
+    },                                                                                      \
+  }
+
+class ZigbeeIlluminanceSensor : public ZigbeeEP {
+public:
+  ZigbeeIlluminanceSensor(uint8_t endpoint);
+  ~ZigbeeIlluminanceSensor() {}
+
+  // Set the illuminance value
+  bool setIlluminance(uint16_t value);
+
+  // Set the min and max value for the illuminance sensor
+  bool setMinMaxValue(uint16_t min, uint16_t max);
+
+  // Set the tolerance value for the illuminance sensor
+  bool setTolerance(uint16_t tolerance);
+
+  // Set the reporting interval for illuminance measurement in seconds and delta
+  bool setReporting(uint16_t min_interval, uint16_t max_interval, uint16_t delta);
+
+  // Report the illuminance value
+  bool report();
+};
+
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeLight.cpp b/libraries/Zigbee/src/ep/ZigbeeLight.cpp
index 100efe34a86..edfac04fcdf 100644
--- a/libraries/Zigbee/src/ep/ZigbeeLight.cpp
+++ b/libraries/Zigbee/src/ep/ZigbeeLight.cpp
@@ -1,5 +1,5 @@
 #include "ZigbeeLight.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 ZigbeeLight::ZigbeeLight(uint8_t endpoint) : ZigbeeEP(endpoint) {
   _device_id = ESP_ZB_HA_ON_OFF_LIGHT_DEVICE_ID;
@@ -33,17 +33,24 @@ void ZigbeeLight::lightChanged() {
   }
 }
 
-void ZigbeeLight::setLight(bool state) {
+bool ZigbeeLight::setLight(bool state) {
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
   _current_state = state;
   lightChanged();
 
   log_v("Updating on/off light state to %d", state);
   /* Update on/off light state */
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_set_attribute_val(
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_ON_OFF, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_ON_OFF_ON_OFF_ID, &_current_state, false
   );
   esp_zb_lock_release();
+
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set light state: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeLight.h b/libraries/Zigbee/src/ep/ZigbeeLight.h
index 8cf8c35f781..773fbb14ec5 100644
--- a/libraries/Zigbee/src/ep/ZigbeeLight.h
+++ b/libraries/Zigbee/src/ep/ZigbeeLight.h
@@ -4,7 +4,7 @@
 
 #include "soc/soc_caps.h"
 #include "sdkconfig.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 #include "ZigbeeEP.h"
 #include "ha/esp_zigbee_ha_standard.h"
@@ -23,7 +23,7 @@ class ZigbeeLight : public ZigbeeEP {
     lightChanged();
   }
   // Use to control light state
-  void setLight(bool state);
+  bool setLight(bool state);
   // Use to get light state
   bool getLightState() {
     return _current_state;
@@ -38,4 +38,4 @@ class ZigbeeLight : public ZigbeeEP {
   bool _current_state;
 };
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeOccupancySensor.cpp b/libraries/Zigbee/src/ep/ZigbeeOccupancySensor.cpp
index dec7910ac03..b8f88fed4a4 100644
--- a/libraries/Zigbee/src/ep/ZigbeeOccupancySensor.cpp
+++ b/libraries/Zigbee/src/ep/ZigbeeOccupancySensor.cpp
@@ -1,5 +1,5 @@
 #include "ZigbeeOccupancySensor.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 esp_zb_cluster_list_t *zigbee_occupancy_sensor_clusters_create(zigbee_occupancy_sensor_cfg_t *occupancy_sensor) {
   esp_zb_basic_cluster_cfg_t *basic_cfg = occupancy_sensor ? &(occupancy_sensor->basic_cfg) : NULL;
@@ -22,26 +22,41 @@ ZigbeeOccupancySensor::ZigbeeOccupancySensor(uint8_t endpoint) : ZigbeeEP(endpoi
   _ep_config = {.endpoint = _endpoint, .app_profile_id = ESP_ZB_AF_HA_PROFILE_ID, .app_device_id = ESP_ZB_HA_SIMPLE_SENSOR_DEVICE_ID, .app_device_version = 0};
 }
 
-void ZigbeeOccupancySensor::setSensorType(uint8_t sensor_type) {
+bool ZigbeeOccupancySensor::setSensorType(uint8_t sensor_type) {
   uint8_t sensor_type_bitmap = 1 << sensor_type;
   esp_zb_attribute_list_t *occupancy_sens_cluster =
     esp_zb_cluster_list_get_cluster(_cluster_list, ESP_ZB_ZCL_CLUSTER_ID_OCCUPANCY_SENSING, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
-  esp_zb_cluster_update_attr(occupancy_sens_cluster, ESP_ZB_ZCL_ATTR_OCCUPANCY_SENSING_OCCUPANCY_SENSOR_TYPE_ID, (void *)&sensor_type);
-  esp_zb_cluster_update_attr(occupancy_sens_cluster, ESP_ZB_ZCL_ATTR_OCCUPANCY_SENSING_OCCUPANCY_SENSOR_TYPE_BITMAP_ID, (void *)&sensor_type_bitmap);
+  esp_err_t ret = esp_zb_cluster_update_attr(occupancy_sens_cluster, ESP_ZB_ZCL_ATTR_OCCUPANCY_SENSING_OCCUPANCY_SENSOR_TYPE_ID, (void *)&sensor_type);
+  if (ret != ESP_OK) {
+    log_e("Failed to set sensor type: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  ret = esp_zb_cluster_update_attr(occupancy_sens_cluster, ESP_ZB_ZCL_ATTR_OCCUPANCY_SENSING_OCCUPANCY_SENSOR_TYPE_BITMAP_ID, (void *)&sensor_type_bitmap);
+  if (ret != ESP_OK) {
+    log_e("Failed to set sensor type bitmap: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeeOccupancySensor::setOccupancy(bool occupied) {
+bool ZigbeeOccupancySensor::setOccupancy(bool occupied) {
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
   log_v("Updating occupancy sensor value...");
   /* Update occupancy sensor value */
   log_d("Setting occupancy to %d", occupied);
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_set_attribute_val(
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_OCCUPANCY_SENSING, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_OCCUPANCY_SENSING_OCCUPANCY_ID, &occupied, false
   );
   esp_zb_lock_release();
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set occupancy: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeeOccupancySensor::report() {
+bool ZigbeeOccupancySensor::report() {
   /* Send report attributes command */
   esp_zb_zcl_report_attr_cmd_t report_attr_cmd;
   report_attr_cmd.address_mode = ESP_ZB_APS_ADDR_MODE_DST_ADDR_ENDP_NOT_PRESENT;
@@ -49,11 +64,17 @@ void ZigbeeOccupancySensor::report() {
   report_attr_cmd.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_CLI;
   report_attr_cmd.clusterID = ESP_ZB_ZCL_CLUSTER_ID_OCCUPANCY_SENSING;
   report_attr_cmd.zcl_basic_cmd.src_endpoint = _endpoint;
+  report_attr_cmd.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
 
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);
+  esp_err_t ret = esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);
   esp_zb_lock_release();
+  if (ret != ESP_OK) {
+    log_e("Failed to send occupancy report: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
   log_v("Occupancy report sent");
+  return true;
 }
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeOccupancySensor.h b/libraries/Zigbee/src/ep/ZigbeeOccupancySensor.h
index 40c5eddbbdd..7408e10a76b 100644
--- a/libraries/Zigbee/src/ep/ZigbeeOccupancySensor.h
+++ b/libraries/Zigbee/src/ep/ZigbeeOccupancySensor.h
@@ -4,7 +4,7 @@
 
 #include "soc/soc_caps.h"
 #include "sdkconfig.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 #include "ZigbeeEP.h"
 #include "ha/esp_zigbee_ha_standard.h"
@@ -42,13 +42,13 @@ class ZigbeeOccupancySensor : public ZigbeeEP {
   ~ZigbeeOccupancySensor() {}
 
   // Set the occupancy value. True for occupied, false for unoccupied
-  void setOccupancy(bool occupied);
+  bool setOccupancy(bool occupied);
 
   // Set the sensor type, see esp_zb_zcl_occupancy_sensing_occupancy_sensor_type_t
-  void setSensorType(uint8_t sensor_type);
+  bool setSensorType(uint8_t sensor_type);
 
   // Report the occupancy value
-  void report();
+  bool report();
 };
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeePressureSensor.cpp b/libraries/Zigbee/src/ep/ZigbeePressureSensor.cpp
index b887680076d..bca06a35d0c 100644
--- a/libraries/Zigbee/src/ep/ZigbeePressureSensor.cpp
+++ b/libraries/Zigbee/src/ep/ZigbeePressureSensor.cpp
@@ -1,5 +1,5 @@
 #include "ZigbeePressureSensor.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 esp_zb_cluster_list_t *zigbee_pressure_sensor_clusters_create(zigbee_pressure_sensor_cfg_t *pressure_sensor) {
   esp_zb_basic_cluster_cfg_t *basic_cfg = pressure_sensor ? &(pressure_sensor->basic_cfg) : NULL;
@@ -22,21 +22,33 @@ ZigbeePressureSensor::ZigbeePressureSensor(uint8_t endpoint) : ZigbeeEP(endpoint
   _ep_config = {.endpoint = _endpoint, .app_profile_id = ESP_ZB_AF_HA_PROFILE_ID, .app_device_id = ESP_ZB_HA_SIMPLE_SENSOR_DEVICE_ID, .app_device_version = 0};
 }
 
-void ZigbeePressureSensor::setMinMaxValue(int16_t min, int16_t max) {
-
+bool ZigbeePressureSensor::setMinMaxValue(int16_t min, int16_t max) {
   esp_zb_attribute_list_t *pressure_measure_cluster =
     esp_zb_cluster_list_get_cluster(_cluster_list, ESP_ZB_ZCL_CLUSTER_ID_PRESSURE_MEASUREMENT, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
-  esp_zb_cluster_update_attr(pressure_measure_cluster, ESP_ZB_ZCL_ATTR_PRESSURE_MEASUREMENT_MIN_VALUE_ID, (void *)&min);
-  esp_zb_cluster_update_attr(pressure_measure_cluster, ESP_ZB_ZCL_ATTR_PRESSURE_MEASUREMENT_MAX_VALUE_ID, (void *)&max);
+  esp_err_t ret = esp_zb_cluster_update_attr(pressure_measure_cluster, ESP_ZB_ZCL_ATTR_PRESSURE_MEASUREMENT_MIN_VALUE_ID, (void *)&min);
+  if (ret != ESP_OK) {
+    log_e("Failed to set min value: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  ret = esp_zb_cluster_update_attr(pressure_measure_cluster, ESP_ZB_ZCL_ATTR_PRESSURE_MEASUREMENT_MAX_VALUE_ID, (void *)&max);
+  if (ret != ESP_OK) {
+    log_e("Failed to set max value: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeePressureSensor::setTolerance(uint16_t tolerance) {
+bool ZigbeePressureSensor::setTolerance(uint16_t tolerance) {
   esp_zb_attribute_list_t *pressure_measure_cluster =
     esp_zb_cluster_list_get_cluster(_cluster_list, ESP_ZB_ZCL_CLUSTER_ID_PRESSURE_MEASUREMENT, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
-  esp_zb_temperature_meas_cluster_add_attr(pressure_measure_cluster, ESP_ZB_ZCL_ATTR_PRESSURE_MEASUREMENT_TOLERANCE_ID, (void *)&tolerance);
+  esp_err_t ret = esp_zb_pressure_meas_cluster_add_attr(pressure_measure_cluster, ESP_ZB_ZCL_ATTR_PRESSURE_MEASUREMENT_TOLERANCE_ID, (void *)&tolerance);
+  if (ret != ESP_OK) {
+    log_e("Failed to set tolerance: 0x%x: %s", ret, esp_err_to_name(ret));
+  }
+  return ret == ESP_OK;
 }
 
-void ZigbeePressureSensor::setReporting(uint16_t min_interval, uint16_t max_interval, uint16_t delta) {
+bool ZigbeePressureSensor::setReporting(uint16_t min_interval, uint16_t max_interval, uint16_t delta) {
   esp_zb_zcl_reporting_info_t reporting_info;
   memset(&reporting_info, 0, sizeof(esp_zb_zcl_reporting_info_t));
   reporting_info.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_SRV;
@@ -52,22 +64,33 @@ void ZigbeePressureSensor::setReporting(uint16_t min_interval, uint16_t max_inte
   reporting_info.dst.profile_id = ESP_ZB_AF_HA_PROFILE_ID;
   reporting_info.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_update_reporting_info(&reporting_info);
+  esp_err_t ret = esp_zb_zcl_update_reporting_info(&reporting_info);
   esp_zb_lock_release();
+  if (ret != ESP_OK) {
+    log_e("Failed to set reporting: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeePressureSensor::setPressure(int16_t pressure) {
+bool ZigbeePressureSensor::setPressure(int16_t pressure) {
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
   log_v("Updating pressure sensor value...");
-  /* Update temperature sensor measured value */
+  /* Update pressure sensor measured value */
   log_d("Setting pressure to %d hPa", pressure);
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_set_attribute_val(
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_PRESSURE_MEASUREMENT, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_PRESSURE_MEASUREMENT_VALUE_ID, &pressure, false
   );
   esp_zb_lock_release();
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set pressure: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeePressureSensor::report() {
+bool ZigbeePressureSensor::report() {
   /* Send report attributes command */
   esp_zb_zcl_report_attr_cmd_t report_attr_cmd;
   report_attr_cmd.address_mode = ESP_ZB_APS_ADDR_MODE_DST_ADDR_ENDP_NOT_PRESENT;
@@ -75,11 +98,17 @@ void ZigbeePressureSensor::report() {
   report_attr_cmd.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_CLI;
   report_attr_cmd.clusterID = ESP_ZB_ZCL_CLUSTER_ID_PRESSURE_MEASUREMENT;
   report_attr_cmd.zcl_basic_cmd.src_endpoint = _endpoint;
+  report_attr_cmd.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
 
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);
+  esp_err_t ret = esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);
   esp_zb_lock_release();
+  if (ret != ESP_OK) {
+    log_e("Failed to send pressure report: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
   log_v("Pressure report sent");
+  return true;
 }
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeePressureSensor.h b/libraries/Zigbee/src/ep/ZigbeePressureSensor.h
index 2d72ef04c06..f93df7a7411 100644
--- a/libraries/Zigbee/src/ep/ZigbeePressureSensor.h
+++ b/libraries/Zigbee/src/ep/ZigbeePressureSensor.h
@@ -4,7 +4,7 @@
 
 #include "soc/soc_caps.h"
 #include "sdkconfig.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 #include "ZigbeeEP.h"
 #include "ha/esp_zigbee_ha_standard.h"
@@ -42,19 +42,19 @@ class ZigbeePressureSensor : public ZigbeeEP {
   ~ZigbeePressureSensor() {}
 
   // Set the pressure value in 1 hPa
-  void setPressure(int16_t value);
+  bool setPressure(int16_t value);
 
   // Set the min and max value for the pressure sensor in 1 hPa
-  void setMinMaxValue(int16_t min, int16_t max);
+  bool setMinMaxValue(int16_t min, int16_t max);
 
   // Set the tolerance value for the pressure sensor in 1 hPa
-  void setTolerance(uint16_t tolerance);
+  bool setTolerance(uint16_t tolerance);
 
   // Set the reporting interval for pressure measurement in seconds and delta (pressure change in 1 hPa)
-  void setReporting(uint16_t min_interval, uint16_t max_interval, uint16_t delta);
+  bool setReporting(uint16_t min_interval, uint16_t max_interval, uint16_t delta);
 
   // Report the pressure value
-  void report();
+  bool report();
 };
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeRangeExtender.cpp b/libraries/Zigbee/src/ep/ZigbeeRangeExtender.cpp
new file mode 100644
index 00000000000..20db20d758a
--- /dev/null
+++ b/libraries/Zigbee/src/ep/ZigbeeRangeExtender.cpp
@@ -0,0 +1,15 @@
+#include "ZigbeeRangeExtender.h"
+#if CONFIG_ZB_ENABLED
+
+ZigbeeRangeExtender::ZigbeeRangeExtender(uint8_t endpoint) : ZigbeeEP(endpoint) {
+  _device_id = ESP_ZB_HA_RANGE_EXTENDER_DEVICE_ID;
+
+  _cluster_list = esp_zb_zcl_cluster_list_create();
+  esp_zb_cluster_list_add_basic_cluster(_cluster_list, esp_zb_basic_cluster_create(NULL), ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
+  esp_zb_cluster_list_add_identify_cluster(_cluster_list, esp_zb_identify_cluster_create(NULL), ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
+  esp_zb_cluster_list_add_identify_cluster(_cluster_list, esp_zb_zcl_attr_list_create(ESP_ZB_ZCL_CLUSTER_ID_IDENTIFY), ESP_ZB_ZCL_CLUSTER_CLIENT_ROLE);
+
+  _ep_config = {.endpoint = _endpoint, .app_profile_id = ESP_ZB_AF_HA_PROFILE_ID, .app_device_id = ESP_ZB_HA_RANGE_EXTENDER_DEVICE_ID, .app_device_version = 0};
+}
+
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeRangeExtender.h b/libraries/Zigbee/src/ep/ZigbeeRangeExtender.h
new file mode 100644
index 00000000000..f9e4a963164
--- /dev/null
+++ b/libraries/Zigbee/src/ep/ZigbeeRangeExtender.h
@@ -0,0 +1,18 @@
+/* Class of Zigbee Range Extender endpoint inherited from common EP class */
+
+#pragma once
+
+#include "soc/soc_caps.h"
+#include "sdkconfig.h"
+#if CONFIG_ZB_ENABLED
+
+#include "ZigbeeEP.h"
+#include "ha/esp_zigbee_ha_standard.h"
+
+class ZigbeeRangeExtender : public ZigbeeEP {
+public:
+  ZigbeeRangeExtender(uint8_t endpoint);
+  ~ZigbeeRangeExtender() {}
+};
+
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeSwitch.cpp b/libraries/Zigbee/src/ep/ZigbeeSwitch.cpp
index f6b36d7f0d4..86c68ae1870 100644
--- a/libraries/Zigbee/src/ep/ZigbeeSwitch.cpp
+++ b/libraries/Zigbee/src/ep/ZigbeeSwitch.cpp
@@ -1,5 +1,5 @@
 #include "ZigbeeSwitch.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 // Initialize the static instance pointer
 ZigbeeSwitch *ZigbeeSwitch::_instance = nullptr;
@@ -313,4 +313,4 @@ void ZigbeeSwitch::lightOnWithTimedOff(uint8_t on_off_control, uint16_t time_on,
   }
 }
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeSwitch.h b/libraries/Zigbee/src/ep/ZigbeeSwitch.h
index b638bfe823a..5c527bec6e3 100644
--- a/libraries/Zigbee/src/ep/ZigbeeSwitch.h
+++ b/libraries/Zigbee/src/ep/ZigbeeSwitch.h
@@ -4,7 +4,7 @@
 
 #include "soc/soc_caps.h"
 #include "sdkconfig.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 #include "ZigbeeEP.h"
 #include "ha/esp_zigbee_ha_standard.h"
@@ -43,4 +43,4 @@ class ZigbeeSwitch : public ZigbeeEP {
   static void findCb(esp_zb_zdp_status_t zdo_status, uint16_t addr, uint8_t endpoint, void *user_ctx);
 };
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeTempSensor.cpp b/libraries/Zigbee/src/ep/ZigbeeTempSensor.cpp
index d419fb14adc..7126dae15cf 100644
--- a/libraries/Zigbee/src/ep/ZigbeeTempSensor.cpp
+++ b/libraries/Zigbee/src/ep/ZigbeeTempSensor.cpp
@@ -1,5 +1,5 @@
 #include "ZigbeeTempSensor.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 ZigbeeTempSensor::ZigbeeTempSensor(uint8_t endpoint) : ZigbeeEP(endpoint) {
   _device_id = ESP_ZB_HA_TEMPERATURE_SENSOR_DEVICE_ID;
@@ -17,24 +17,38 @@ static int16_t zb_float_to_s16(float temp) {
   return (int16_t)(temp * 100);
 }
 
-void ZigbeeTempSensor::setMinMaxValue(float min, float max) {
+bool ZigbeeTempSensor::setMinMaxValue(float min, float max) {
   int16_t zb_min = zb_float_to_s16(min);
   int16_t zb_max = zb_float_to_s16(max);
   esp_zb_attribute_list_t *temp_measure_cluster =
     esp_zb_cluster_list_get_cluster(_cluster_list, ESP_ZB_ZCL_CLUSTER_ID_TEMP_MEASUREMENT, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
-  esp_zb_cluster_update_attr(temp_measure_cluster, ESP_ZB_ZCL_ATTR_TEMP_MEASUREMENT_MIN_VALUE_ID, (void *)&zb_min);
-  esp_zb_cluster_update_attr(temp_measure_cluster, ESP_ZB_ZCL_ATTR_TEMP_MEASUREMENT_MAX_VALUE_ID, (void *)&zb_max);
+  esp_err_t ret = esp_zb_cluster_update_attr(temp_measure_cluster, ESP_ZB_ZCL_ATTR_TEMP_MEASUREMENT_MIN_VALUE_ID, (void *)&zb_min);
+  if (ret != ESP_OK) {
+    log_e("Failed to set min value: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  ret = esp_zb_cluster_update_attr(temp_measure_cluster, ESP_ZB_ZCL_ATTR_TEMP_MEASUREMENT_MAX_VALUE_ID, (void *)&zb_max);
+  if (ret != ESP_OK) {
+    log_e("Failed to set max value: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeeTempSensor::setTolerance(float tolerance) {
+bool ZigbeeTempSensor::setTolerance(float tolerance) {
   // Convert tolerance to ZCL uint16_t
   uint16_t zb_tolerance = (uint16_t)(tolerance * 100);
   esp_zb_attribute_list_t *temp_measure_cluster =
     esp_zb_cluster_list_get_cluster(_cluster_list, ESP_ZB_ZCL_CLUSTER_ID_TEMP_MEASUREMENT, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
-  esp_zb_temperature_meas_cluster_add_attr(temp_measure_cluster, ESP_ZB_ZCL_ATTR_TEMP_MEASUREMENT_TOLERANCE_ID, (void *)&zb_tolerance);
+  esp_err_t ret = esp_zb_temperature_meas_cluster_add_attr(temp_measure_cluster, ESP_ZB_ZCL_ATTR_TEMP_MEASUREMENT_TOLERANCE_ID, (void *)&zb_tolerance);
+  if (ret != ESP_OK) {
+    log_e("Failed to set tolerance: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeeTempSensor::setReporting(uint16_t min_interval, uint16_t max_interval, float delta) {
+bool ZigbeeTempSensor::setReporting(uint16_t min_interval, uint16_t max_interval, float delta) {
   esp_zb_zcl_reporting_info_t reporting_info;
   memset(&reporting_info, 0, sizeof(esp_zb_zcl_reporting_info_t));
   reporting_info.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_SRV;
@@ -48,24 +62,36 @@ void ZigbeeTempSensor::setReporting(uint16_t min_interval, uint16_t max_interval
   reporting_info.u.send_info.def_max_interval = max_interval;
   reporting_info.u.send_info.delta.u16 = (uint16_t)(delta * 100);  // Convert delta to ZCL uint16_t
   reporting_info.dst.profile_id = ESP_ZB_AF_HA_PROFILE_ID;
-  reporting_info.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC, esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_update_reporting_info(&reporting_info);
+  reporting_info.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
+  esp_zb_lock_acquire(portMAX_DELAY);
+  esp_err_t ret = esp_zb_zcl_update_reporting_info(&reporting_info);
   esp_zb_lock_release();
+  if (ret != ESP_OK) {
+    log_e("Failed to set reporting: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeeTempSensor::setTemperature(float temperature) {
+bool ZigbeeTempSensor::setTemperature(float temperature) {
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
   int16_t zb_temperature = zb_float_to_s16(temperature);
   log_v("Updating temperature sensor value...");
   /* Update temperature sensor measured value */
   log_d("Setting temperature to %d", zb_temperature);
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_set_attribute_val(
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_TEMP_MEASUREMENT, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_TEMP_MEASUREMENT_VALUE_ID, &zb_temperature, false
   );
   esp_zb_lock_release();
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set temperature: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeeTempSensor::reportTemperature() {
+bool ZigbeeTempSensor::reportTemperature() {
   /* Send report attributes command */
   esp_zb_zcl_report_attr_cmd_t report_attr_cmd;
   report_attr_cmd.address_mode = ESP_ZB_APS_ADDR_MODE_DST_ADDR_ENDP_NOT_PRESENT;
@@ -73,11 +99,17 @@ void ZigbeeTempSensor::reportTemperature() {
   report_attr_cmd.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_CLI;
   report_attr_cmd.clusterID = ESP_ZB_ZCL_CLUSTER_ID_TEMP_MEASUREMENT;
   report_attr_cmd.zcl_basic_cmd.src_endpoint = _endpoint;
+  report_attr_cmd.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
 
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);
+  esp_err_t ret = esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);
   esp_zb_lock_release();
+  if (ret != ESP_OK) {
+    log_e("Failed to send temperature report: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
   log_v("Temperature report sent");
+  return true;
 }
 
 void ZigbeeTempSensor::addHumiditySensor(float min, float max, float tolerance) {
@@ -94,20 +126,26 @@ void ZigbeeTempSensor::addHumiditySensor(float min, float max, float tolerance)
   _humidity_sensor = true;
 }
 
-void ZigbeeTempSensor::setHumidity(float humidity) {
+bool ZigbeeTempSensor::setHumidity(float humidity) {
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
   int16_t zb_humidity = zb_float_to_s16(humidity);
   log_v("Updating humidity sensor value...");
   /* Update humidity sensor measured value */
   log_d("Setting humidity to %d", zb_humidity);
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_set_attribute_val(
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_REL_HUMIDITY_MEASUREMENT, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_REL_HUMIDITY_MEASUREMENT_VALUE_ID, &zb_humidity,
     false
   );
   esp_zb_lock_release();
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set humidity: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeeTempSensor::reportHumidity() {
+bool ZigbeeTempSensor::reportHumidity() {
   /* Send report attributes command */
   esp_zb_zcl_report_attr_cmd_t report_attr_cmd;
   report_attr_cmd.address_mode = ESP_ZB_APS_ADDR_MODE_DST_ADDR_ENDP_NOT_PRESENT;
@@ -115,14 +153,20 @@ void ZigbeeTempSensor::reportHumidity() {
   report_attr_cmd.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_CLI;
   report_attr_cmd.clusterID = ESP_ZB_ZCL_CLUSTER_ID_REL_HUMIDITY_MEASUREMENT;
   report_attr_cmd.zcl_basic_cmd.src_endpoint = _endpoint;
+  report_attr_cmd.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
 
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);
+  esp_err_t ret = esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);
   esp_zb_lock_release();
+  if (ret != ESP_OK) {
+    log_e("Failed to send humidity report: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
   log_v("Humidity report sent");
+  return true;
 }
 
-void ZigbeeTempSensor::setHumidityReporting(uint16_t min_interval, uint16_t max_interval, float delta) {
+bool ZigbeeTempSensor::setHumidityReporting(uint16_t min_interval, uint16_t max_interval, float delta) {
   esp_zb_zcl_reporting_info_t reporting_info;
   memset(&reporting_info, 0, sizeof(esp_zb_zcl_reporting_info_t));
   reporting_info.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_SRV;
@@ -138,15 +182,22 @@ void ZigbeeTempSensor::setHumidityReporting(uint16_t min_interval, uint16_t max_
   reporting_info.dst.profile_id = ESP_ZB_AF_HA_PROFILE_ID;
   reporting_info.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_update_reporting_info(&reporting_info);
+  esp_err_t ret = esp_zb_zcl_update_reporting_info(&reporting_info);
   esp_zb_lock_release();
+  if (ret != ESP_OK) {
+    log_e("Failed to set humidity reporting: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeeTempSensor::report() {
-  reportTemperature();
+bool ZigbeeTempSensor::report() {
+  bool temp_ret = reportTemperature();
+  bool hum_ret = true;
   if (_humidity_sensor) {
-    reportHumidity();
+    hum_ret = reportHumidity();
   }
+  return temp_ret && hum_ret;
 }
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeTempSensor.h b/libraries/Zigbee/src/ep/ZigbeeTempSensor.h
index e610ff8d356..bc769b32de6 100644
--- a/libraries/Zigbee/src/ep/ZigbeeTempSensor.h
+++ b/libraries/Zigbee/src/ep/ZigbeeTempSensor.h
@@ -4,7 +4,7 @@
 
 #include "soc/soc_caps.h"
 #include "sdkconfig.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 #include "ZigbeeEP.h"
 #include "ha/esp_zigbee_ha_standard.h"
@@ -15,37 +15,37 @@ class ZigbeeTempSensor : public ZigbeeEP {
   ~ZigbeeTempSensor() {}
 
   // Set the temperature value in 0,01°C
-  void setTemperature(float value);
+  bool setTemperature(float value);
 
   // Set the min and max value for the temperature sensor in 0,01°C
-  void setMinMaxValue(float min, float max);
+  bool setMinMaxValue(float min, float max);
 
   // Set the tolerance value for the temperature sensor in 0,01°C
-  void setTolerance(float tolerance);
+  bool setTolerance(float tolerance);
 
   // Set the reporting interval for temperature measurement in seconds and delta (temp change in 0,01 °C)
-  void setReporting(uint16_t min_interval, uint16_t max_interval, float delta);
+  bool setReporting(uint16_t min_interval, uint16_t max_interval, float delta);
 
   // Report the temperature value
-  void reportTemperature();
+  bool reportTemperature();
 
   // Add humidity cluster to the temperature sensor device
   void addHumiditySensor(float min, float max, float tolerance);
 
   // Set the humidity value in 0,01%
-  void setHumidity(float value);
+  bool setHumidity(float value);
 
   // Set the reporting interval for humidity measurement in seconds and delta (humidity change in 0,01%)
-  void setHumidityReporting(uint16_t min_interval, uint16_t max_interval, float delta);
+  bool setHumidityReporting(uint16_t min_interval, uint16_t max_interval, float delta);
 
   // Report the humidity value
-  void reportHumidity();
+  bool reportHumidity();
 
   // Report the temperature and humidity values if humidity sensor is added
-  void report();
+  bool report();
 
 private:
   bool _humidity_sensor;
 };
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeThermostat.cpp b/libraries/Zigbee/src/ep/ZigbeeThermostat.cpp
index f8957f073a5..357bcaed1bc 100644
--- a/libraries/Zigbee/src/ep/ZigbeeThermostat.cpp
+++ b/libraries/Zigbee/src/ep/ZigbeeThermostat.cpp
@@ -1,5 +1,5 @@
 #include "ZigbeeThermostat.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 static float zb_s16_to_temperature(int16_t value) {
   return 1.0 * value / 100;
@@ -202,4 +202,4 @@ void ZigbeeThermostat::setTemperatureReporting(uint16_t min_interval, uint16_t m
   esp_zb_lock_release();
 }
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeThermostat.h b/libraries/Zigbee/src/ep/ZigbeeThermostat.h
index 669ed9ab50a..7895115e1d1 100644
--- a/libraries/Zigbee/src/ep/ZigbeeThermostat.h
+++ b/libraries/Zigbee/src/ep/ZigbeeThermostat.h
@@ -4,7 +4,7 @@
 
 #include "soc/soc_caps.h"
 #include "sdkconfig.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 #include "ZigbeeEP.h"
 #include "ha/esp_zigbee_ha_standard.h"
@@ -62,4 +62,4 @@ class ZigbeeThermostat : public ZigbeeEP {
   void zbAttributeRead(uint16_t cluster_id, const esp_zb_zcl_attribute_t *attribute) override;
 };
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeVibrationSensor.cpp b/libraries/Zigbee/src/ep/ZigbeeVibrationSensor.cpp
index 2f2172c89df..6be457c389a 100644
--- a/libraries/Zigbee/src/ep/ZigbeeVibrationSensor.cpp
+++ b/libraries/Zigbee/src/ep/ZigbeeVibrationSensor.cpp
@@ -1,5 +1,5 @@
 #include "ZigbeeVibrationSensor.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 esp_zb_cluster_list_t *zigbee_vibration_sensor_clusters_create(zigbee_vibration_sensor_cfg_t *vibration_sensor) {
   esp_zb_basic_cluster_cfg_t *basic_cfg = vibration_sensor ? &(vibration_sensor->basic_cfg) : NULL;
@@ -29,16 +29,22 @@ void ZigbeeVibrationSensor::setIASClientEndpoint(uint8_t ep_number) {
   _ias_cie_endpoint = ep_number;
 }
 
-void ZigbeeVibrationSensor::setVibration(bool sensed) {
+bool ZigbeeVibrationSensor::setVibration(bool sensed) {
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
   log_v("Setting Vibration sensor to %s", sensed ? "sensed" : "not sensed");
   uint8_t vibration = (uint8_t)sensed;
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_set_attribute_val(
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_IAS_ZONE, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_IAS_ZONE_ZONESTATUS_ID, &vibration, false
   );
   esp_zb_lock_release();
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set vibration status: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    return false;
+  }
   _zone_status = vibration;
   report();
+  return true;
 }
 
 void ZigbeeVibrationSensor::report() {
@@ -49,7 +55,6 @@ void ZigbeeVibrationSensor::report() {
   status_change_notif_cmd.zcl_basic_cmd.src_endpoint = _endpoint;
   status_change_notif_cmd.zcl_basic_cmd.dst_endpoint = _ias_cie_endpoint;  //default is 1
   memcpy(status_change_notif_cmd.zcl_basic_cmd.dst_addr_u.addr_long, _ias_cie_addr, sizeof(esp_zb_ieee_addr_t));
-
   status_change_notif_cmd.zone_status = _zone_status;
   status_change_notif_cmd.extend_status = 0;
   status_change_notif_cmd.zone_id = _zone_id;
@@ -83,4 +88,4 @@ void ZigbeeVibrationSensor::zbIASZoneEnrollResponse(const esp_zb_zcl_ias_zone_en
   }
 }
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeVibrationSensor.h b/libraries/Zigbee/src/ep/ZigbeeVibrationSensor.h
index 799cc943cdb..2f67c7bb6b4 100644
--- a/libraries/Zigbee/src/ep/ZigbeeVibrationSensor.h
+++ b/libraries/Zigbee/src/ep/ZigbeeVibrationSensor.h
@@ -4,7 +4,7 @@
 
 #include "soc/soc_caps.h"
 #include "sdkconfig.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 #include "ZigbeeEP.h"
 #include "ha/esp_zigbee_ha_standard.h"
@@ -48,7 +48,7 @@ class ZigbeeVibrationSensor : public ZigbeeEP {
   void setIASClientEndpoint(uint8_t ep_number);
 
   // Set the vibration sensor value (true = sensed, false = not sensed)
-  void setVibration(bool sensed);
+  bool setVibration(bool sensed);
 
   // Report the vibration sensor value, done automatically after setting the sensed value
   void report();
@@ -61,4 +61,4 @@ class ZigbeeVibrationSensor : public ZigbeeEP {
   uint8_t _ias_cie_endpoint;
 };
 
-#endif  //SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeWindSpeedSensor.cpp b/libraries/Zigbee/src/ep/ZigbeeWindSpeedSensor.cpp
new file mode 100644
index 00000000000..72184927d4d
--- /dev/null
+++ b/libraries/Zigbee/src/ep/ZigbeeWindSpeedSensor.cpp
@@ -0,0 +1,128 @@
+#include "ZigbeeWindSpeedSensor.h"
+#if CONFIG_ZB_ENABLED
+
+esp_zb_cluster_list_t *zigbee_wind_speed_sensor_clusters_create(zigbee_wind_speed_sensor_cfg_t *wind_speed_sensor) {
+  esp_zb_basic_cluster_cfg_t *basic_cfg = wind_speed_sensor ? &(wind_speed_sensor->basic_cfg) : NULL;
+  esp_zb_identify_cluster_cfg_t *identify_cfg = wind_speed_sensor ? &(wind_speed_sensor->identify_cfg) : NULL;
+  esp_zb_wind_speed_measurement_cluster_cfg_t *wind_speed_cfg = wind_speed_sensor ? &(wind_speed_sensor->wind_speed_meas_cfg) : NULL;
+  esp_zb_cluster_list_t *cluster_list = esp_zb_zcl_cluster_list_create();
+  esp_zb_cluster_list_add_basic_cluster(cluster_list, esp_zb_basic_cluster_create(basic_cfg), ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
+  esp_zb_cluster_list_add_identify_cluster(cluster_list, esp_zb_identify_cluster_create(identify_cfg), ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
+  esp_zb_cluster_list_add_wind_speed_measurement_cluster(
+    cluster_list, esp_zb_wind_speed_measurement_cluster_create(wind_speed_cfg), ESP_ZB_ZCL_CLUSTER_SERVER_ROLE
+  );
+  return cluster_list;
+}
+
+// There is no device_id for wind speed sensor, we use a generic one
+ZigbeeWindSpeedSensor::ZigbeeWindSpeedSensor(uint8_t endpoint) : ZigbeeEP(endpoint) {
+  _device_id = ESP_ZB_HA_SIMPLE_SENSOR_DEVICE_ID;
+
+  zigbee_wind_speed_sensor_cfg_t windspeed_sensor_cfg = ZIGBEE_DEFAULT_WIND_SPEED_SENSOR_CONFIG();
+  _cluster_list = zigbee_wind_speed_sensor_clusters_create(&windspeed_sensor_cfg);
+
+  _ep_config = {.endpoint = _endpoint, .app_profile_id = ESP_ZB_AF_HA_PROFILE_ID, .app_device_id = ESP_ZB_HA_SIMPLE_SENSOR_DEVICE_ID, .app_device_version = 0};
+}
+
+static uint16_t zb_windspeed_to_u16(float windspeed) {
+  return (uint16_t)(windspeed * 100);
+}
+
+bool ZigbeeWindSpeedSensor::setMinMaxValue(float min, float max) {
+  uint16_t zb_min = zb_windspeed_to_u16(min);
+  uint16_t zb_max = zb_windspeed_to_u16(max);
+  esp_zb_attribute_list_t *windspeed_measure_cluster =
+    esp_zb_cluster_list_get_cluster(_cluster_list, ESP_ZB_ZCL_CLUSTER_ID_WIND_SPEED_MEASUREMENT, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
+  esp_err_t ret = esp_zb_cluster_update_attr(windspeed_measure_cluster, ESP_ZB_ZCL_ATTR_WIND_SPEED_MEASUREMENT_MIN_MEASURED_VALUE_ID, (void *)&zb_min);
+  if (ret != ESP_OK) {
+    log_e("Failed to set min value: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  ret = esp_zb_cluster_update_attr(windspeed_measure_cluster, ESP_ZB_ZCL_ATTR_WIND_SPEED_MEASUREMENT_MAX_MEASURED_VALUE_ID, (void *)&zb_max);
+  if (ret != ESP_OK) {
+    log_e("Failed to set max value: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
+}
+
+bool ZigbeeWindSpeedSensor::setTolerance(float tolerance) {
+  // Convert tolerance to ZCL uint16_t
+  uint16_t zb_tolerance = zb_windspeed_to_u16(tolerance);
+  esp_zb_attribute_list_t *windspeed_measure_cluster =
+    esp_zb_cluster_list_get_cluster(_cluster_list, ESP_ZB_ZCL_CLUSTER_ID_WIND_SPEED_MEASUREMENT, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
+  esp_err_t ret =
+    esp_zb_wind_speed_measurement_cluster_add_attr(windspeed_measure_cluster, ESP_ZB_ZCL_ATTR_WIND_SPEED_MEASUREMENT_TOLERANCE_ID, (void *)&zb_tolerance);
+  if (ret != ESP_OK) {
+    log_e("Failed to set tolerance: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
+}
+
+bool ZigbeeWindSpeedSensor::setReporting(uint16_t min_interval, uint16_t max_interval, float delta) {
+  esp_zb_zcl_reporting_info_t reporting_info;
+  memset(&reporting_info, 0, sizeof(esp_zb_zcl_reporting_info_t));
+  reporting_info.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_SRV;
+  reporting_info.ep = _endpoint;
+  reporting_info.cluster_id = ESP_ZB_ZCL_CLUSTER_ID_WIND_SPEED_MEASUREMENT;
+  reporting_info.cluster_role = ESP_ZB_ZCL_CLUSTER_SERVER_ROLE;
+  reporting_info.attr_id = ESP_ZB_ZCL_ATTR_WIND_SPEED_MEASUREMENT_MEASURED_VALUE_ID;
+  reporting_info.u.send_info.min_interval = min_interval;
+  reporting_info.u.send_info.max_interval = max_interval;
+  reporting_info.u.send_info.def_min_interval = min_interval;
+  reporting_info.u.send_info.def_max_interval = max_interval;
+  reporting_info.u.send_info.delta.u16 = (uint16_t)(delta * 100);  // Convert delta to ZCL uint16_t
+  reporting_info.dst.profile_id = ESP_ZB_AF_HA_PROFILE_ID;
+  reporting_info.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
+  esp_zb_lock_acquire(portMAX_DELAY);
+  esp_err_t ret = esp_zb_zcl_update_reporting_info(&reporting_info);
+  esp_zb_lock_release();
+  if (ret != ESP_OK) {
+    log_e("Failed to set reporting: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
+}
+
+bool ZigbeeWindSpeedSensor::setWindSpeed(float windspeed) {
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
+  uint16_t zb_windspeed = zb_windspeed_to_u16(windspeed);
+  log_v("Updating windspeed sensor value...");
+  /* Update windspeed sensor measured value */
+  log_d("Setting windspeed to %d", zb_windspeed);
+  esp_zb_lock_acquire(portMAX_DELAY);
+  ret = esp_zb_zcl_set_attribute_val(
+    _endpoint, ESP_ZB_ZCL_CLUSTER_ID_WIND_SPEED_MEASUREMENT, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_WIND_SPEED_MEASUREMENT_MEASURED_VALUE_ID,
+    &zb_windspeed, false
+  );
+  esp_zb_lock_release();
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set wind speed: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    return false;
+  }
+  return true;
+}
+
+bool ZigbeeWindSpeedSensor::reportWindSpeed() {
+  /* Send report attributes command */
+  esp_zb_zcl_report_attr_cmd_t report_attr_cmd;
+  report_attr_cmd.address_mode = ESP_ZB_APS_ADDR_MODE_DST_ADDR_ENDP_NOT_PRESENT;
+  report_attr_cmd.attributeID = ESP_ZB_ZCL_ATTR_WIND_SPEED_MEASUREMENT_MEASURED_VALUE_ID;
+  report_attr_cmd.direction = ESP_ZB_ZCL_CMD_DIRECTION_TO_CLI;
+  report_attr_cmd.clusterID = ESP_ZB_ZCL_CLUSTER_ID_WIND_SPEED_MEASUREMENT;
+  report_attr_cmd.zcl_basic_cmd.src_endpoint = _endpoint;
+  report_attr_cmd.manuf_code = ESP_ZB_ZCL_ATTR_NON_MANUFACTURER_SPECIFIC;
+
+  esp_zb_lock_acquire(portMAX_DELAY);
+  esp_err_t ret = esp_zb_zcl_report_attr_cmd_req(&report_attr_cmd);
+  esp_zb_lock_release();
+  if (ret != ESP_OK) {
+    log_e("Failed to send wind speed report: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  log_v("Wind speed measurement report sent");
+  return true;
+}
+
+#endif  //CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeWindSpeedSensor.h b/libraries/Zigbee/src/ep/ZigbeeWindSpeedSensor.h
new file mode 100644
index 00000000000..641c1d84780
--- /dev/null
+++ b/libraries/Zigbee/src/ep/ZigbeeWindSpeedSensor.h
@@ -0,0 +1,56 @@
+/* Class of Zigbee WindSpeed sensor endpoint inherited from common EP class */
+
+#pragma once
+
+#include "soc/soc_caps.h"
+#include "sdkconfig.h"
+#if CONFIG_ZB_ENABLED
+
+#include "ZigbeeEP.h"
+#include "ha/esp_zigbee_ha_standard.h"
+
+#define ZIGBEE_DEFAULT_WIND_SPEED_SENSOR_CONFIG()                                         \
+  {                                                                                       \
+    .basic_cfg =                                                                          \
+      {                                                                                   \
+        .zcl_version = ESP_ZB_ZCL_BASIC_ZCL_VERSION_DEFAULT_VALUE,                        \
+        .power_source = ESP_ZB_ZCL_BASIC_POWER_SOURCE_DEFAULT_VALUE,                      \
+      },                                                                                  \
+    .identify_cfg =                                                                       \
+      {                                                                                   \
+        .identify_time = ESP_ZB_ZCL_IDENTIFY_IDENTIFY_TIME_DEFAULT_VALUE,                 \
+      },                                                                                  \
+    .wind_speed_meas_cfg = {                                                              \
+      .measured_value = ESP_ZB_ZCL_WIND_SPEED_MEASUREMENT_MEASURED_VALUE_DEFAULT,         \
+      .min_measured_value = ESP_ZB_ZCL_WIND_SPEED_MEASUREMENT_MIN_MEASURED_VALUE_DEFAULT, \
+      .max_measured_value = ESP_ZB_ZCL_WIND_SPEED_MEASUREMENT_MAX_MEASURED_VALUE_DEFAULT, \
+    },                                                                                    \
+  }
+
+typedef struct zigbee_wind_speed_sensor_cfg_s {
+  esp_zb_basic_cluster_cfg_t basic_cfg;       /*!<  Basic cluster configuration, @ref esp_zb_basic_cluster_cfg_s */
+  esp_zb_identify_cluster_cfg_t identify_cfg; /*!<  Identify cluster configuration, @ref esp_zb_identify_cluster_cfg_s */
+  esp_zb_wind_speed_measurement_cluster_cfg_t
+    wind_speed_meas_cfg; /*!<  Wind speed measurement cluster configuration, @ref esp_zb_wind_speed_measurement_cluster_cfg_s */
+} zigbee_wind_speed_sensor_cfg_t;
+
+class ZigbeeWindSpeedSensor : public ZigbeeEP {
+public:
+  ZigbeeWindSpeedSensor(uint8_t endpoint);
+  ~ZigbeeWindSpeedSensor() {}
+
+  // Set the WindSpeed value in 0,01 m/s
+  bool setWindSpeed(float value);
+
+  // Set the min and max value for the WindSpeed sensor
+  bool setMinMaxValue(float min, float max);
+
+  // Set the tolerance value for the WindSpeed sensor
+  bool setTolerance(float tolerance);
+
+  // Set the reporting interval for WindSpeed measurement in seconds and delta
+  bool setReporting(uint16_t min_interval, uint16_t max_interval, float delta);
+  bool reportWindSpeed();
+};
+
+#endif  //CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeWindowCovering.cpp b/libraries/Zigbee/src/ep/ZigbeeWindowCovering.cpp
index 970017165e2..7c7889dbbf7 100644
--- a/libraries/Zigbee/src/ep/ZigbeeWindowCovering.cpp
+++ b/libraries/Zigbee/src/ep/ZigbeeWindowCovering.cpp
@@ -1,6 +1,5 @@
-
 #include "ZigbeeWindowCovering.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 esp_zb_cluster_list_t *ZigbeeWindowCovering::zigbee_window_covering_clusters_create(zigbee_window_covering_cfg_t *window_covering_cfg) {
   esp_zb_attribute_list_t *esp_zb_basic_cluster = esp_zb_basic_cluster_create(&window_covering_cfg->basic_cfg);
@@ -72,13 +71,18 @@ ZigbeeWindowCovering::ZigbeeWindowCovering(uint8_t endpoint) : ZigbeeEP(endpoint
 }
 
 // Configuration methods for window covering
-void ZigbeeWindowCovering::setCoveringType(ZigbeeWindowCoveringType covering_type) {
+bool ZigbeeWindowCovering::setCoveringType(ZigbeeWindowCoveringType covering_type) {
   esp_zb_attribute_list_t *window_covering_cluster =
     esp_zb_cluster_list_get_cluster(_cluster_list, ESP_ZB_ZCL_CLUSTER_ID_WINDOW_COVERING, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
-  esp_zb_cluster_update_attr(window_covering_cluster, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_WINDOW_COVERING_TYPE_ID, (void *)&covering_type);
+  esp_err_t ret = esp_zb_cluster_update_attr(window_covering_cluster, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_WINDOW_COVERING_TYPE_ID, (void *)&covering_type);
+  if (ret != ESP_OK) {
+    log_e("Failed to set covering type: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeeWindowCovering::setConfigStatus(
+bool ZigbeeWindowCovering::setConfigStatus(
   bool operational, bool online, bool commands_reversed, bool lift_closed_loop, bool tilt_closed_loop, bool lift_encoder_controlled,
   bool tilt_encoder_controlled
 ) {
@@ -93,10 +97,15 @@ void ZigbeeWindowCovering::setConfigStatus(
 
   esp_zb_attribute_list_t *window_covering_cluster =
     esp_zb_cluster_list_get_cluster(_cluster_list, ESP_ZB_ZCL_CLUSTER_ID_WINDOW_COVERING, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
-  esp_zb_cluster_update_attr(window_covering_cluster, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_CONFIG_STATUS_ID, (void *)&config_status);
+  esp_err_t ret = esp_zb_cluster_update_attr(window_covering_cluster, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_CONFIG_STATUS_ID, (void *)&config_status);
+  if (ret != ESP_OK) {
+    log_e("Failed to set config status: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeeWindowCovering::setMode(bool motor_reversed, bool calibration_mode, bool maintenance_mode, bool leds_on) {
+bool ZigbeeWindowCovering::setMode(bool motor_reversed, bool calibration_mode, bool maintenance_mode, bool leds_on) {
   uint8_t mode = (motor_reversed ? ESP_ZB_ZCL_ATTR_WINDOW_COVERING_TYPE_REVERSED_MOTOR_DIRECTION : 0)
                  | (calibration_mode ? ESP_ZB_ZCL_ATTR_WINDOW_COVERING_TYPE_RUN_IN_CALIBRATION_MODE : 0)
                  | (maintenance_mode ? ESP_ZB_ZCL_ATTR_WINDOW_COVERING_TYPE_MOTOR_IS_RUNNING_IN_MAINTENANCE_MODE : 0)
@@ -106,10 +115,15 @@ void ZigbeeWindowCovering::setMode(bool motor_reversed, bool calibration_mode, b
 
   esp_zb_attribute_list_t *window_covering_cluster =
     esp_zb_cluster_list_get_cluster(_cluster_list, ESP_ZB_ZCL_CLUSTER_ID_WINDOW_COVERING, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
-  esp_zb_cluster_update_attr(window_covering_cluster, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_MODE_ID, (void *)&mode);
+  esp_err_t ret = esp_zb_cluster_update_attr(window_covering_cluster, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_MODE_ID, (void *)&mode);
+  if (ret != ESP_OK) {
+    log_e("Failed to set mode: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
-void ZigbeeWindowCovering::setLimits(
+bool ZigbeeWindowCovering::setLimits(
   uint16_t installed_open_limit_lift, uint16_t installed_closed_limit_lift, uint16_t installed_open_limit_tilt, uint16_t installed_closed_limit_tilt
 ) {
   _installed_open_limit_lift = installed_open_limit_lift;
@@ -121,12 +135,41 @@ void ZigbeeWindowCovering::setLimits(
 
   esp_zb_attribute_list_t *window_covering_cluster =
     esp_zb_cluster_list_get_cluster(_cluster_list, ESP_ZB_ZCL_CLUSTER_ID_WINDOW_COVERING, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE);
-  esp_zb_cluster_update_attr(window_covering_cluster, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_INSTALLED_OPEN_LIMIT_LIFT_ID, (void *)&_installed_open_limit_lift);
-  esp_zb_cluster_update_attr(window_covering_cluster, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_INSTALLED_CLOSED_LIMIT_LIFT_ID, (void *)&_installed_closed_limit_lift);
-  esp_zb_cluster_update_attr(window_covering_cluster, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_INSTALLED_OPEN_LIMIT_TILT_ID, (void *)&_installed_open_limit_tilt);
-  esp_zb_cluster_update_attr(window_covering_cluster, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_INSTALLED_CLOSED_LIMIT_TILT_ID, (void *)&_installed_closed_limit_tilt);
-  esp_zb_cluster_update_attr(window_covering_cluster, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_PHYSICAL_CLOSED_LIMIT_LIFT_ID, (void *)&_physical_closed_limit_lift);
-  esp_zb_cluster_update_attr(window_covering_cluster, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_PHY_CLOSED_LIMIT_TILT_ID, (void *)&_physical_closed_limit_tilt);
+  esp_err_t ret =
+    esp_zb_cluster_update_attr(window_covering_cluster, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_INSTALLED_OPEN_LIMIT_LIFT_ID, (void *)&_installed_open_limit_lift);
+  if (ret != ESP_OK) {
+    log_e("Failed to set installed open limit lift: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  ret =
+    esp_zb_cluster_update_attr(window_covering_cluster, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_INSTALLED_CLOSED_LIMIT_LIFT_ID, (void *)&_installed_closed_limit_lift);
+  if (ret != ESP_OK) {
+    log_e("Failed to set installed closed limit lift: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  ret = esp_zb_cluster_update_attr(window_covering_cluster, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_INSTALLED_OPEN_LIMIT_TILT_ID, (void *)&_installed_open_limit_tilt);
+  if (ret != ESP_OK) {
+    log_e("Failed to set installed open limit tilt: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  ret =
+    esp_zb_cluster_update_attr(window_covering_cluster, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_INSTALLED_CLOSED_LIMIT_TILT_ID, (void *)&_installed_closed_limit_tilt);
+  if (ret != ESP_OK) {
+    log_e("Failed to set installed closed limit tilt: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  ret =
+    esp_zb_cluster_update_attr(window_covering_cluster, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_PHYSICAL_CLOSED_LIMIT_LIFT_ID, (void *)&_physical_closed_limit_lift);
+  if (ret != ESP_OK) {
+    log_e("Failed to set physical closed limit lift: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  ret = esp_zb_cluster_update_attr(window_covering_cluster, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_PHY_CLOSED_LIMIT_TILT_ID, (void *)&_physical_closed_limit_tilt);
+  if (ret != ESP_OK) {
+    log_e("Failed to set physical closed limit tilt: 0x%x: %s", ret, esp_err_to_name(ret));
+    return false;
+  }
+  return true;
 }
 
 // Callback for handling incoming messages and commands
@@ -183,12 +226,13 @@ void ZigbeeWindowCovering::zbWindowCoveringMovementCmd(const esp_zb_zcl_window_c
       if (_current_lift_percentage != message->payload.percentage_lift_value) {
         _current_lift_percentage = message->payload.percentage_lift_value;
         goToLiftPercentage(_current_lift_percentage);
+        return;
       }
-      return;
     } else if (message->command == ESP_ZB_ZCL_CMD_WINDOW_COVERING_GO_TO_TILT_PERCENTAGE) {
       if (_current_tilt_percentage != message->payload.percentage_tilt_value) {
         _current_tilt_percentage = message->payload.percentage_tilt_value;
         goToTiltPercentage(_current_tilt_percentage);
+        return;
       }
     } else {
       log_w("Received message ignored. Command: %d not supported for Window Covering", message->command);
@@ -229,80 +273,122 @@ void ZigbeeWindowCovering::stop() {
 }
 
 // Methods to control window covering from user application
-void ZigbeeWindowCovering::setLiftPosition(uint16_t lift_position) {
+bool ZigbeeWindowCovering::setLiftPosition(uint16_t lift_position) {
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
   // Update both lift attributes
   _current_lift_position = lift_position;
   _current_lift_percentage = ((lift_position - _installed_open_limit_lift) * 100) / (_installed_closed_limit_lift - _installed_open_limit_lift);
-
   log_v("Updating window covering lift position to %d (%d%)", _current_lift_position, _current_lift_percentage);
-  // set lift state
+
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_set_attribute_val(
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_WINDOW_COVERING, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_CURRENT_POSITION_LIFT_ID,
     &_current_lift_position, false
   );
-  esp_zb_zcl_set_attribute_val(
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set lift position: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    goto unlock_and_return;
+  }
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_WINDOW_COVERING, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_CURRENT_POSITION_LIFT_PERCENTAGE_ID,
     &_current_lift_percentage, false
   );
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set lift percentage: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    goto unlock_and_return;
+  }
+unlock_and_return:
   esp_zb_lock_release();
+  return ret == ESP_ZB_ZCL_STATUS_SUCCESS;
 }
 
-void ZigbeeWindowCovering::setLiftPercentage(uint8_t lift_percentage) {
+bool ZigbeeWindowCovering::setLiftPercentage(uint8_t lift_percentage) {
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
   // Update both lift attributes
   _current_lift_percentage = lift_percentage;
   _current_lift_position = _installed_open_limit_lift + ((_installed_closed_limit_lift - _installed_open_limit_lift) * lift_percentage) / 100;
+  log_v("Updating window covering lift percentage to %d%% (%d)", _current_lift_percentage, _current_lift_position);
 
-  log_v("Updating window covering lift position to %d (%d%)", _current_lift_position, _current_lift_percentage);
-  // set lift state
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_set_attribute_val(
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_WINDOW_COVERING, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_CURRENT_POSITION_LIFT_ID,
     &_current_lift_position, false
   );
-  esp_zb_zcl_set_attribute_val(
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set lift position: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    goto unlock_and_return;
+  }
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_WINDOW_COVERING, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_CURRENT_POSITION_LIFT_PERCENTAGE_ID,
     &_current_lift_percentage, false
   );
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set lift percentage: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    goto unlock_and_return;
+  }
+unlock_and_return:
   esp_zb_lock_release();
+  return ret == ESP_ZB_ZCL_STATUS_SUCCESS;
 }
 
-void ZigbeeWindowCovering::setTiltPosition(uint16_t tilt_position) {
+bool ZigbeeWindowCovering::setTiltPosition(uint16_t tilt_position) {
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
   // Update both tilt attributes
   _current_tilt_position = tilt_position;
   _current_tilt_percentage = ((tilt_position - _installed_open_limit_tilt) * 100) / (_installed_closed_limit_tilt - _installed_open_limit_tilt);
 
   log_v("Updating window covering tilt position to %d (%d%)", _current_tilt_position, _current_tilt_percentage);
-  // set lift state
+
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_set_attribute_val(
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_WINDOW_COVERING, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_CURRENT_POSITION_TILT_ID,
     &_current_tilt_position, false
   );
-  esp_zb_zcl_set_attribute_val(
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set tilt position: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    goto unlock_and_return;
+  }
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_WINDOW_COVERING, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_CURRENT_POSITION_TILT_PERCENTAGE_ID,
     &_current_tilt_percentage, false
   );
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set tilt percentage: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    goto unlock_and_return;
+  }
+unlock_and_return:
   esp_zb_lock_release();
+  return ret == ESP_ZB_ZCL_STATUS_SUCCESS;
 }
 
-void ZigbeeWindowCovering::setTiltPercentage(uint8_t tilt_percentage) {
+bool ZigbeeWindowCovering::setTiltPercentage(uint8_t tilt_percentage) {
+  esp_zb_zcl_status_t ret = ESP_ZB_ZCL_STATUS_SUCCESS;
   // Update both tilt attributes
   _current_tilt_percentage = tilt_percentage;
-  _current_tilt_position = _installed_open_limit_lift + ((_installed_closed_limit_tilt - _installed_open_limit_tilt) * tilt_percentage) / 100;
+  _current_tilt_position = _installed_open_limit_tilt + ((_installed_closed_limit_tilt - _installed_open_limit_tilt) * tilt_percentage) / 100;
+
+  log_v("Updating window covering tilt percentage to %d%% (%d)", _current_tilt_percentage, _current_tilt_position);
 
-  log_v("Updating window covering tilt position to %d (%d%)", _current_tilt_position, _current_tilt_percentage);
-  // set lift state
   esp_zb_lock_acquire(portMAX_DELAY);
-  esp_zb_zcl_set_attribute_val(
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_WINDOW_COVERING, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_CURRENT_POSITION_TILT_ID,
     &_current_tilt_position, false
   );
-  esp_zb_zcl_set_attribute_val(
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set tilt position: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    goto unlock_and_return;
+  }
+  ret = esp_zb_zcl_set_attribute_val(
     _endpoint, ESP_ZB_ZCL_CLUSTER_ID_WINDOW_COVERING, ESP_ZB_ZCL_CLUSTER_SERVER_ROLE, ESP_ZB_ZCL_ATTR_WINDOW_COVERING_CURRENT_POSITION_TILT_PERCENTAGE_ID,
     &_current_tilt_percentage, false
   );
+  if (ret != ESP_ZB_ZCL_STATUS_SUCCESS) {
+    log_e("Failed to set tilt percentage: 0x%x: %s", ret, esp_zb_zcl_status_to_name(ret));
+    goto unlock_and_return;
+  }
+unlock_and_return:
   esp_zb_lock_release();
+  return ret == ESP_ZB_ZCL_STATUS_SUCCESS;
 }
 
-#endif  // SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/libraries/Zigbee/src/ep/ZigbeeWindowCovering.h b/libraries/Zigbee/src/ep/ZigbeeWindowCovering.h
index 08e0a35f737..288d92c5765 100644
--- a/libraries/Zigbee/src/ep/ZigbeeWindowCovering.h
+++ b/libraries/Zigbee/src/ep/ZigbeeWindowCovering.h
@@ -4,7 +4,7 @@
 
 #include "soc/soc_caps.h"
 #include "sdkconfig.h"
-#if SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#if CONFIG_ZB_ENABLED
 
 #include "ZigbeeEP.h"
 #include "ha/esp_zigbee_ha_standard.h"
@@ -87,25 +87,25 @@ class ZigbeeWindowCovering : public ZigbeeEP {
   }
 
   // Set the window covering position in centimeters or percentage (0-100)
-  void setLiftPosition(uint16_t lift_position);
-  void setLiftPercentage(uint8_t lift_percentage);
-  void setTiltPosition(uint16_t tilt_position);
-  void setTiltPercentage(uint8_t tilt_percentage);
+  bool setLiftPosition(uint16_t lift_position);
+  bool setLiftPercentage(uint8_t lift_percentage);
+  bool setTiltPosition(uint16_t tilt_position);
+  bool setTiltPercentage(uint8_t tilt_percentage);
 
   // Set the window covering type (see ZigbeeWindowCoveringType)
-  void setCoveringType(ZigbeeWindowCoveringType covering_type);
+  bool setCoveringType(ZigbeeWindowCoveringType covering_type);
 
   // Set window covering config/status, for more info see esp_zb_zcl_window_covering_config_status_t
-  void setConfigStatus(
+  bool setConfigStatus(
     bool operational, bool online, bool commands_reversed, bool lift_closed_loop, bool tilt_closed_loop, bool lift_encoder_controlled,
     bool tilt_encoder_controlled
   );
 
   // Set configuration mode of window covering, for more info see esp_zb_zcl_window_covering_mode_t
-  void setMode(bool motor_reversed, bool calibration_mode, bool maintenance_mode, bool leds_on);
+  bool setMode(bool motor_reversed, bool calibration_mode, bool maintenance_mode, bool leds_on);
 
   // Set limits of motion, for more info see esp_zb_zcl_window_covering_info_attr_t
-  void setLimits(
+  bool setLimits(
     uint16_t installed_open_limit_lift, uint16_t installed_closed_limit_lift, uint16_t installed_open_limit_tilt, uint16_t installed_closed_limit_tilt
   );
 
@@ -144,4 +144,4 @@ class ZigbeeWindowCovering : public ZigbeeEP {
   uint16_t _physical_closed_limit_tilt;
 };
 
-#endif  // SOC_IEEE802154_SUPPORTED && CONFIG_ZB_ENABLED
+#endif  // CONFIG_ZB_ENABLED
diff --git a/package.json b/package.json
index 3a5c290a1cd..9c918733209 100644
--- a/package.json
+++ b/package.json
@@ -1,6 +1,6 @@
 {
   "name": "framework-arduinoespressif32",
-  "version": "3.1.3",
+  "version": "3.2.0",
   "description": "Arduino Wiring-based Framework for the Espressif ESP32, ESP32-P4, ESP32-S and ESP32-C series of SoCs",
   "keywords": [
     "framework",
diff --git a/package/package_esp32_index.template.json b/package/package_esp32_index.template.json
index 5d73debe76f..19254d11682 100644
--- a/package/package_esp32_index.template.json
+++ b/package/package_esp32_index.template.json
@@ -26,13 +26,22 @@
               "name": "ESP32 Dev Board"
             },
             {
-              "name": "ESP32-S2 Dev Board"
+              "name": "ESP32-C3 Dev Board"
             },
             {
-              "name": "ESP32-S3 Dev Board"
+              "name": "ESP32-C6 Dev Board"
             },
             {
-              "name": "ESP32-C3 Dev Board"
+              "name": "ESP32-H2 Dev Board"
+            },
+            {
+              "name": "ESP32-P4 Dev Board"
+            },
+            {
+              "name": "ESP32-S2 Dev Board"
+            },
+            {
+              "name": "ESP32-S3 Dev Board"
             },
             {
               "name": "Arduino Nano ESP32"
@@ -42,12 +51,12 @@
             {
               "packager": "esp32",
               "name": "esp32-arduino-libs",
-              "version": "idf-release_v5.3-489d7a2b-v1"
+              "version": "idf-release_v5.4-2f7dcd86-v1"
             },
             {
               "packager": "esp32",
               "name": "xtensa-esp-elf-gcc",
-              "version": "esp-13.2.0_20240530"
+              "version": "esp-14.2.0_20241119"
             },
             {
               "packager": "esp32",
@@ -57,7 +66,7 @@
             {
               "packager": "esp32",
               "name": "riscv32-esp-elf-gcc",
-              "version": "esp-13.2.0_20240530"
+              "version": "esp-14.2.0_20241119"
             },
             {
               "packager": "esp32",
@@ -95,125 +104,125 @@
       "tools": [
         {
           "name": "esp32-arduino-libs",
-          "version": "idf-release_v5.3-489d7a2b-v1",
+          "version": "idf-release_v5.4-2f7dcd86-v1",
           "systems": [
             {
               "host": "i686-mingw32",
-              "url": "https://github.com/espressif/esp32-arduino-lib-builder/releases/download/idf-release_v5.3/esp32-arduino-libs-idf-release_v5.3-489d7a2b-v1.zip",
-              "archiveFileName": "esp32-arduino-libs-idf-release_v5.3-489d7a2b-v1.zip",
-              "checksum": "SHA-256:489012502218a7d30f6c312764bc8d10830a51e1db29558f15181c68373d0095",
-              "size": "341414090"
+              "url": "https://github.com/espressif/esp32-arduino-lib-builder/releases/download/idf-release_v5.4/esp32-arduino-libs-idf-release_v5.4-2f7dcd86-v1.zip",
+              "archiveFileName": "esp32-arduino-libs-idf-release_v5.4-2f7dcd86-v1.zip",
+              "checksum": "SHA-256:11f1271fe5e2857155d90384690069e4d33f0f97a4c04e7474b29a7cbc7ededd",
+              "size": "352347498"
             },
             {
               "host": "x86_64-mingw32",
-              "url": "https://github.com/espressif/esp32-arduino-lib-builder/releases/download/idf-release_v5.3/esp32-arduino-libs-idf-release_v5.3-489d7a2b-v1.zip",
-              "archiveFileName": "esp32-arduino-libs-idf-release_v5.3-489d7a2b-v1.zip",
-              "checksum": "SHA-256:489012502218a7d30f6c312764bc8d10830a51e1db29558f15181c68373d0095",
-              "size": "341414090"
+              "url": "https://github.com/espressif/esp32-arduino-lib-builder/releases/download/idf-release_v5.4/esp32-arduino-libs-idf-release_v5.4-2f7dcd86-v1.zip",
+              "archiveFileName": "esp32-arduino-libs-idf-release_v5.4-2f7dcd86-v1.zip",
+              "checksum": "SHA-256:11f1271fe5e2857155d90384690069e4d33f0f97a4c04e7474b29a7cbc7ededd",
+              "size": "352347498"
             },
             {
               "host": "arm64-apple-darwin",
-              "url": "https://github.com/espressif/esp32-arduino-lib-builder/releases/download/idf-release_v5.3/esp32-arduino-libs-idf-release_v5.3-489d7a2b-v1.zip",
-              "archiveFileName": "esp32-arduino-libs-idf-release_v5.3-489d7a2b-v1.zip",
-              "checksum": "SHA-256:489012502218a7d30f6c312764bc8d10830a51e1db29558f15181c68373d0095",
-              "size": "341414090"
+              "url": "https://github.com/espressif/esp32-arduino-lib-builder/releases/download/idf-release_v5.4/esp32-arduino-libs-idf-release_v5.4-2f7dcd86-v1.zip",
+              "archiveFileName": "esp32-arduino-libs-idf-release_v5.4-2f7dcd86-v1.zip",
+              "checksum": "SHA-256:11f1271fe5e2857155d90384690069e4d33f0f97a4c04e7474b29a7cbc7ededd",
+              "size": "352347498"
             },
             {
               "host": "x86_64-apple-darwin",
-              "url": "https://github.com/espressif/esp32-arduino-lib-builder/releases/download/idf-release_v5.3/esp32-arduino-libs-idf-release_v5.3-489d7a2b-v1.zip",
-              "archiveFileName": "esp32-arduino-libs-idf-release_v5.3-489d7a2b-v1.zip",
-              "checksum": "SHA-256:489012502218a7d30f6c312764bc8d10830a51e1db29558f15181c68373d0095",
-              "size": "341414090"
+              "url": "https://github.com/espressif/esp32-arduino-lib-builder/releases/download/idf-release_v5.4/esp32-arduino-libs-idf-release_v5.4-2f7dcd86-v1.zip",
+              "archiveFileName": "esp32-arduino-libs-idf-release_v5.4-2f7dcd86-v1.zip",
+              "checksum": "SHA-256:11f1271fe5e2857155d90384690069e4d33f0f97a4c04e7474b29a7cbc7ededd",
+              "size": "352347498"
             },
             {
               "host": "x86_64-pc-linux-gnu",
-              "url": "https://github.com/espressif/esp32-arduino-lib-builder/releases/download/idf-release_v5.3/esp32-arduino-libs-idf-release_v5.3-489d7a2b-v1.zip",
-              "archiveFileName": "esp32-arduino-libs-idf-release_v5.3-489d7a2b-v1.zip",
-              "checksum": "SHA-256:489012502218a7d30f6c312764bc8d10830a51e1db29558f15181c68373d0095",
-              "size": "341414090"
+              "url": "https://github.com/espressif/esp32-arduino-lib-builder/releases/download/idf-release_v5.4/esp32-arduino-libs-idf-release_v5.4-2f7dcd86-v1.zip",
+              "archiveFileName": "esp32-arduino-libs-idf-release_v5.4-2f7dcd86-v1.zip",
+              "checksum": "SHA-256:11f1271fe5e2857155d90384690069e4d33f0f97a4c04e7474b29a7cbc7ededd",
+              "size": "352347498"
             },
             {
               "host": "i686-pc-linux-gnu",
-              "url": "https://github.com/espressif/esp32-arduino-lib-builder/releases/download/idf-release_v5.3/esp32-arduino-libs-idf-release_v5.3-489d7a2b-v1.zip",
-              "archiveFileName": "esp32-arduino-libs-idf-release_v5.3-489d7a2b-v1.zip",
-              "checksum": "SHA-256:489012502218a7d30f6c312764bc8d10830a51e1db29558f15181c68373d0095",
-              "size": "341414090"
+              "url": "https://github.com/espressif/esp32-arduino-lib-builder/releases/download/idf-release_v5.4/esp32-arduino-libs-idf-release_v5.4-2f7dcd86-v1.zip",
+              "archiveFileName": "esp32-arduino-libs-idf-release_v5.4-2f7dcd86-v1.zip",
+              "checksum": "SHA-256:11f1271fe5e2857155d90384690069e4d33f0f97a4c04e7474b29a7cbc7ededd",
+              "size": "352347498"
             },
             {
               "host": "aarch64-linux-gnu",
-              "url": "https://github.com/espressif/esp32-arduino-lib-builder/releases/download/idf-release_v5.3/esp32-arduino-libs-idf-release_v5.3-489d7a2b-v1.zip",
-              "archiveFileName": "esp32-arduino-libs-idf-release_v5.3-489d7a2b-v1.zip",
-              "checksum": "SHA-256:489012502218a7d30f6c312764bc8d10830a51e1db29558f15181c68373d0095",
-              "size": "341414090"
+              "url": "https://github.com/espressif/esp32-arduino-lib-builder/releases/download/idf-release_v5.4/esp32-arduino-libs-idf-release_v5.4-2f7dcd86-v1.zip",
+              "archiveFileName": "esp32-arduino-libs-idf-release_v5.4-2f7dcd86-v1.zip",
+              "checksum": "SHA-256:11f1271fe5e2857155d90384690069e4d33f0f97a4c04e7474b29a7cbc7ededd",
+              "size": "352347498"
             },
             {
               "host": "arm-linux-gnueabihf",
-              "url": "https://github.com/espressif/esp32-arduino-lib-builder/releases/download/idf-release_v5.3/esp32-arduino-libs-idf-release_v5.3-489d7a2b-v1.zip",
-              "archiveFileName": "esp32-arduino-libs-idf-release_v5.3-489d7a2b-v1.zip",
-              "checksum": "SHA-256:489012502218a7d30f6c312764bc8d10830a51e1db29558f15181c68373d0095",
-              "size": "341414090"
+              "url": "https://github.com/espressif/esp32-arduino-lib-builder/releases/download/idf-release_v5.4/esp32-arduino-libs-idf-release_v5.4-2f7dcd86-v1.zip",
+              "archiveFileName": "esp32-arduino-libs-idf-release_v5.4-2f7dcd86-v1.zip",
+              "checksum": "SHA-256:11f1271fe5e2857155d90384690069e4d33f0f97a4c04e7474b29a7cbc7ededd",
+              "size": "352347498"
             }
           ]
         },
         {
           "name": "xtensa-esp-elf-gcc",
-          "version": "esp-13.2.0_20240530",
+          "version": "esp-14.2.0_20241119",
           "systems": [
             {
               "host": "x86_64-pc-linux-gnu",
-              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-13.2.0_20240530/xtensa-esp-elf-13.2.0_20240530-x86_64-linux-gnu.tar.gz",
-              "archiveFileName": "xtensa-esp-elf-13.2.0_20240530-x86_64-linux-gnu.tar.gz",
-              "checksum": "SHA-256:bce77e8480701d5a90545369d1b5848f6048eb39c0022d2446d1e33a8e127490",
-              "size": "208911713"
+              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-14.2.0_20241119/xtensa-esp-elf-14.2.0_20241119-x86_64-linux-gnu.tar.gz",
+              "archiveFileName": "xtensa-esp-elf-14.2.0_20241119-x86_64-linux-gnu.tar.gz",
+              "checksum": "SHA-256:b1859df334a85541ae746e1b86439f59180d87f8cf1cc04c2e770fadf9f006e9",
+              "size": "323678089"
             },
             {
               "host": "aarch64-linux-gnu",
-              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-13.2.0_20240530/xtensa-esp-elf-13.2.0_20240530-aarch64-linux-gnu.tar.gz",
-              "archiveFileName": "xtensa-esp-elf-13.2.0_20240530-aarch64-linux-gnu.tar.gz",
-              "checksum": "SHA-256:7c9e3c1adc733d042ed87b92daa1d6396e1b441c1755f1fa14cb88855719ba88",
-              "size": "202519931"
+              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-14.2.0_20241119/xtensa-esp-elf-14.2.0_20241119-aarch64-linux-gnu.tar.gz",
+              "archiveFileName": "xtensa-esp-elf-14.2.0_20241119-aarch64-linux-gnu.tar.gz",
+              "checksum": "SHA-256:7ff023033a5c00e55b9fc0a0b26d18fb0e476c24e24c5b0459bcb2e05a3729f1",
+              "size": "320064691"
             },
             {
               "host": "arm-linux-gnueabihf",
-              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-13.2.0_20240530/xtensa-esp-elf-13.2.0_20240530-arm-linux-gnueabi.tar.gz",
-              "archiveFileName": "xtensa-esp-elf-13.2.0_20240530-arm-linux-gnueabi.tar.gz",
-              "checksum": "SHA-256:d6955e8ea6af91574bf9213b92f32ca09eb8640103446b7fa19a63cfeeec5421",
-              "size": "202206516"
+              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-14.2.0_20241119/xtensa-esp-elf-14.2.0_20241119-arm-linux-gnueabi.tar.gz",
+              "archiveFileName": "xtensa-esp-elf-14.2.0_20241119-arm-linux-gnueabi.tar.gz",
+              "checksum": "SHA-256:bb11dbf3ed25d4e0cc9e938749519e8236cfa2609e85742d311f1d869111805a",
+              "size": "319454139"
             },
             {
               "host": "i686-pc-linux-gnu",
-              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-13.2.0_20240530/xtensa-esp-elf-13.2.0_20240530-i586-linux-gnu.tar.gz",
-              "archiveFileName": "xtensa-esp-elf-13.2.0_20240530-i586-linux-gnu.tar.gz",
-              "checksum": "SHA-256:3666ee74ecb693ee6488f11469802630a7b0d32608184045a4f35cb413f59e3d",
-              "size": "213304863"
+              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-14.2.0_20241119/xtensa-esp-elf-14.2.0_20241119-i586-linux-gnu.tar.gz",
+              "archiveFileName": "xtensa-esp-elf-14.2.0_20241119-i586-linux-gnu.tar.gz",
+              "checksum": "SHA-256:5ac611dca62ec791d413d1f417d566c444b006d2a4f97bd749b15f782d87249b",
+              "size": "328335914"
             },
             {
               "host": "x86_64-apple-darwin",
-              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-13.2.0_20240530/xtensa-esp-elf-13.2.0_20240530-x86_64-apple-darwin.tar.gz",
-              "archiveFileName": "xtensa-esp-elf-13.2.0_20240530-x86_64-apple-darwin.tar.gz",
-              "checksum": "SHA-256:948cf57b6eecc898b5f70e06ad08ba88c08b627be570ec631dfcd72f6295194a",
-              "size": "221357024"
+              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-14.2.0_20241119/xtensa-esp-elf-14.2.0_20241119-x86_64-apple-darwin_signed.tar.gz",
+              "archiveFileName": "xtensa-esp-elf-14.2.0_20241119-x86_64-apple-darwin_signed.tar.gz",
+              "checksum": "SHA-256:15b3e60362028eaeff9156dc82dac3f1436b4aeef3920b28d7650974d8c34751",
+              "size": "336215844"
             },
             {
               "host": "arm64-apple-darwin",
-              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-13.2.0_20240530/xtensa-esp-elf-13.2.0_20240530-aarch64-apple-darwin.tar.gz",
-              "archiveFileName": "xtensa-esp-elf-13.2.0_20240530-aarch64-apple-darwin.tar.gz",
-              "checksum": "SHA-256:6f03fdf0cc14a7f3900ee59977f62e8626d8b7c208506e52f1fd883ac223427a",
-              "size": "199689745"
+              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-14.2.0_20241119/xtensa-esp-elf-14.2.0_20241119-aarch64-apple-darwin_signed.tar.gz",
+              "archiveFileName": "xtensa-esp-elf-14.2.0_20241119-aarch64-apple-darwin_signed.tar.gz",
+              "checksum": "SHA-256:45c475518735133789bacccad31f872318b7ecc0b31cc9b7924aad880034f0bf",
+              "size": "318797396"
             },
             {
               "host": "i686-mingw32",
-              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-13.2.0_20240530/xtensa-esp-elf-13.2.0_20240530-i686-w64-mingw32_hotfix.zip",
-              "archiveFileName": "xtensa-esp-elf-13.2.0_20240530-i686-w64-mingw32_hotfix.zip",
-              "checksum": "SHA-256:d6b227c50e3c8e21d62502b3140e5ab74a4cb502c2b4169c36238b9858a8fb88",
-              "size": "266042967"
+              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-14.2.0_20241119/xtensa-esp-elf-14.2.0_20241119-i686-w64-mingw32.zip",
+              "archiveFileName": "xtensa-esp-elf-14.2.0_20241119-i686-w64-mingw32.zip",
+              "checksum": "SHA-256:b30e450e0af279783c54a9ae77c3b367dd556b78eda930a92ec7b784a74c28c8",
+              "size": "382457717"
             },
             {
               "host": "x86_64-mingw32",
-              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-13.2.0_20240530/xtensa-esp-elf-13.2.0_20240530-x86_64-w64-mingw32_hotfix.zip",
-              "archiveFileName": "xtensa-esp-elf-13.2.0_20240530-x86_64-w64-mingw32_hotfix.zip",
-              "checksum": "SHA-256:155ee97b531236e6a7c763395c68ca793e55e74d2cb4d38a23057a153e01e7d0",
-              "size": "269831985"
+              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-14.2.0_20241119/xtensa-esp-elf-14.2.0_20241119-x86_64-w64-mingw32.zip",
+              "archiveFileName": "xtensa-esp-elf-14.2.0_20241119-x86_64-w64-mingw32.zip",
+              "checksum": "SHA-256:62ae704777d73c30689efff6e81178632a1ca44d1a2d60f4621eb997e040e028",
+              "size": "386316009"
             }
           ]
         },
@@ -281,63 +290,63 @@
         },
         {
           "name": "riscv32-esp-elf-gcc",
-          "version": "esp-13.2.0_20240530",
+          "version": "esp-14.2.0_20241119",
           "systems": [
             {
               "host": "x86_64-pc-linux-gnu",
-              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-13.2.0_20240530/riscv32-esp-elf-13.2.0_20240530-x86_64-linux-gnu.tar.gz",
-              "archiveFileName": "riscv32-esp-elf-13.2.0_20240530-x86_64-linux-gnu.tar.gz",
-              "checksum": "SHA-256:e7fbfffbb19dcd3764a9848a141bf44e19ad0b48e0bd1515912345c26fe52fba",
-              "size": "294346758"
+              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-14.2.0_20241119/riscv32-esp-elf-14.2.0_20241119-x86_64-linux-gnu.tar.gz",
+              "archiveFileName": "riscv32-esp-elf-14.2.0_20241119-x86_64-linux-gnu.tar.gz",
+              "checksum": "SHA-256:a16942465d33c7f0334c16e83bc6feb62e06eeb79cf19099293480bb8d48c0cd",
+              "size": "593721156"
             },
             {
               "host": "aarch64-linux-gnu",
-              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-13.2.0_20240530/riscv32-esp-elf-13.2.0_20240530-aarch64-linux-gnu.tar.gz",
-              "archiveFileName": "riscv32-esp-elf-13.2.0_20240530-aarch64-linux-gnu.tar.gz",
-              "checksum": "SHA-256:a178a895b807ed2e87d5d62153c36a6aae048581f527c0eb152f0a02b8de9571",
-              "size": "288374597"
+              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-14.2.0_20241119/riscv32-esp-elf-14.2.0_20241119-aarch64-linux-gnu.tar.gz",
+              "archiveFileName": "riscv32-esp-elf-14.2.0_20241119-aarch64-linux-gnu.tar.gz",
+              "checksum": "SHA-256:22486233d0e0fd58a54ae453b701f195f1432fc6f2e17085b9d6c8d5d9acefb7",
+              "size": "587879927"
             },
             {
               "host": "arm-linux-gnueabihf",
-              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-13.2.0_20240530/riscv32-esp-elf-13.2.0_20240530-arm-linux-gnueabi.tar.gz",
-              "archiveFileName": "riscv32-esp-elf-13.2.0_20240530-arm-linux-gnueabi.tar.gz",
-              "checksum": "SHA-256:4a2f176d0f5bc8a70645975e2a08ea94145fb69b7225c5cdcbd6024a4836aaf5",
-              "size": "287737495"
+              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-14.2.0_20241119/riscv32-esp-elf-14.2.0_20241119-arm-linux-gnueabi.tar.gz",
+              "archiveFileName": "riscv32-esp-elf-14.2.0_20241119-arm-linux-gnueabi.tar.gz",
+              "checksum": "SHA-256:27a72d5d96cdb56dae2a1da5dfde1717c18a8c1f9a1454c8e34a8bd34abe662d",
+              "size": "586531522"
             },
             {
               "host": "i686-pc-linux-gnu",
-              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-13.2.0_20240530/riscv32-esp-elf-13.2.0_20240530-i586-linux-gnu.tar.gz",
-              "archiveFileName": "riscv32-esp-elf-13.2.0_20240530-i586-linux-gnu.tar.gz",
-              "checksum": "SHA-256:7a6f02f1b2effafb18600bbf602818f6923fd320f000fb8659f34acbfda8812f",
-              "size": "299138540"
+              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-14.2.0_20241119/riscv32-esp-elf-14.2.0_20241119-i586-linux-gnu.tar.gz",
+              "archiveFileName": "riscv32-esp-elf-14.2.0_20241119-i586-linux-gnu.tar.gz",
+              "checksum": "SHA-256:b7bd6e4cd53a4c55831d48e96a3d500bfffb091bec84a30bc8c3ad687e3eb3a2",
+              "size": "597070471"
             },
             {
               "host": "x86_64-apple-darwin",
-              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-13.2.0_20240530/riscv32-esp-elf-13.2.0_20240530-x86_64-apple-darwin.tar.gz",
-              "archiveFileName": "riscv32-esp-elf-13.2.0_20240530-x86_64-apple-darwin.tar.gz",
-              "checksum": "SHA-256:a193b4f025d0d836b0a9d9cbe760af1c53e53af66fc332fe98952bc4c456dd9a",
-              "size": "305025700"
+              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-14.2.0_20241119/riscv32-esp-elf-14.2.0_20241119-x86_64-apple-darwin_signed.tar.gz",
+              "archiveFileName": "riscv32-esp-elf-14.2.0_20241119-x86_64-apple-darwin_signed.tar.gz",
+              "checksum": "SHA-256:5f8b571e1aedbe9f856f3bdeca6600cd5510ccff1ca102c4f001421eda560585",
+              "size": "602343061"
             },
             {
               "host": "arm64-apple-darwin",
-              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-13.2.0_20240530/riscv32-esp-elf-13.2.0_20240530-aarch64-apple-darwin.tar.gz",
-              "archiveFileName": "riscv32-esp-elf-13.2.0_20240530-aarch64-apple-darwin.tar.gz",
-              "checksum": "SHA-256:7082dd2e2123dea5609a24092d19ac6612ae7e219df1d298de6b2f64cb4af0df",
-              "size": "285458443"
+              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-14.2.0_20241119/riscv32-esp-elf-14.2.0_20241119-aarch64-apple-darwin_signed.tar.gz",
+              "archiveFileName": "riscv32-esp-elf-14.2.0_20241119-aarch64-apple-darwin_signed.tar.gz",
+              "checksum": "SHA-256:a7276042a7eb2d33c2dff7167539e445c32c07d43a2c6827e86d035642503e0b",
+              "size": "578521565"
             },
             {
               "host": "i686-mingw32",
-              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-13.2.0_20240530/riscv32-esp-elf-13.2.0_20240530-i686-w64-mingw32.zip",
-              "archiveFileName": "riscv32-esp-elf-13.2.0_20240530-i686-w64-mingw32.zip",
-              "checksum": "SHA-256:590bfb10576702639825581cc00c445da6e577012840a787137417e80d15f46d",
-              "size": "366573064"
+              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-14.2.0_20241119/riscv32-esp-elf-14.2.0_20241119-i686-w64-mingw32.zip",
+              "archiveFileName": "riscv32-esp-elf-14.2.0_20241119-i686-w64-mingw32.zip",
+              "checksum": "SHA-256:54193a97bd75205678ead8d11f00b351cfa3c2a6e5ab5d966341358b9f9422d7",
+              "size": "672055172"
             },
             {
               "host": "x86_64-mingw32",
-              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-13.2.0_20240530/riscv32-esp-elf-13.2.0_20240530-x86_64-w64-mingw32.zip",
-              "archiveFileName": "riscv32-esp-elf-13.2.0_20240530-x86_64-w64-mingw32.zip",
-              "checksum": "SHA-256:413eb9f6adf8fdaf25544d014c850fc09eb38bb93a2fc5ebd107ab1b0de1bb3a",
-              "size": "369820297"
+              "url": "https://github.com/espressif/crosstool-NG/releases/download/esp-14.2.0_20241119/riscv32-esp-elf-14.2.0_20241119-x86_64-w64-mingw32.zip",
+              "archiveFileName": "riscv32-esp-elf-14.2.0_20241119-x86_64-w64-mingw32.zip",
+              "checksum": "SHA-256:24c8407fa467448d394e0639436a5ede31caf1838e35e8435e19df58ebed438c",
+              "size": "677812937"
             }
           ]
         },
diff --git a/platform.txt b/platform.txt
index 1c718369587..65be05b3bf4 100644
--- a/platform.txt
+++ b/platform.txt
@@ -1,5 +1,5 @@
 name=ESP32 Arduino
-version=3.1.3
+version=3.2.0
 
 tools.esp32-arduino-libs.path={runtime.platform.path}/tools/esp32-arduino-libs
 tools.esp32-arduino-libs.path.windows={runtime.platform.path}\tools\esp32-arduino-libs
diff --git a/tests/requirements.txt b/tests/requirements.txt
index c98c032a3ae..b2bae3b86d0 100644
--- a/tests/requirements.txt
+++ b/tests/requirements.txt
@@ -5,3 +5,4 @@ pytest-embedded-serial-esp==1.12.0
 pytest-embedded-arduino==1.12.0
 pytest-embedded-wokwi==1.12.0
 pytest-embedded-qemu==1.12.0
+esptool==4.8.1
diff --git a/tests/validation/democfg/ci.json b/tests/validation/democfg/ci.json
index e4f275a4bca..cf5c796644e 100644
--- a/tests/validation/democfg/ci.json
+++ b/tests/validation/democfg/ci.json
@@ -14,17 +14,18 @@
   "platforms": {
     "hardware": true,
     "qemu": false,
-    "wokwi": true
+    "wokwi": false
   },
   "requires": [
     "CONFIG_SOC_UART_SUPPORTED=y"
   ],
   "targets": {
     "esp32": true,
-    "esp32c3": true,
+    "esp32c3": false,
     "esp32c6": true,
     "esp32h2": false,
     "esp32s2": true,
-    "esp32s3": true
+    "esp32s3": true,
+    "esp32p4": false
   }
 }
diff --git a/tests/validation/gpio/ci.json b/tests/validation/gpio/ci.json
index f03ec83b39d..7bc6a6ed163 100644
--- a/tests/validation/gpio/ci.json
+++ b/tests/validation/gpio/ci.json
@@ -1,7 +1,6 @@
 {
   "platforms": {
     "hardware": false,
-    "qemu": false,
-    "wokwi": false
+    "qemu": false
   }
 }
diff --git a/tests/validation/gpio/diagram.esp32p4.json b/tests/validation/gpio/diagram.esp32p4.json
new file mode 100644
index 00000000000..ffb0cde2775
--- /dev/null
+++ b/tests/validation/gpio/diagram.esp32p4.json
@@ -0,0 +1,28 @@
+{
+  "version": 1,
+  "author": "lucasssvaz",
+  "editor": "wokwi",
+  "parts": [
+    {
+      "type": "board-esp32-p4-function-ev",
+      "id": "esp32",
+      "top": -66.32,
+      "left": -277.63,
+      "attrs": {}
+    },
+    {
+      "type": "wokwi-pushbutton",
+      "id": "btn1",
+      "top": -128.2,
+      "left": -19.2,
+      "attrs": { "color": "green", "bounce": "1" }
+    }
+  ],
+  "connections": [
+    [ "esp32:38", "$serialMonitor:TX", "", [] ],
+    [ "esp32:37", "$serialMonitor:RX", "", [] ],
+    [ "btn1:2.r", "esp32:GND.3", "black", [ "h19.4", "v29" ] ],
+    [ "esp32:0", "btn1:1.l", "blue", [ "h-48", "v-67.2" ] ]
+  ],
+  "dependencies": {}
+}
diff --git a/tests/validation/gpio/scenario.yaml b/tests/validation/gpio/scenario.yaml
index a915b546b49..957f58b2176 100644
--- a/tests/validation/gpio/scenario.yaml
+++ b/tests/validation/gpio/scenario.yaml
@@ -6,31 +6,31 @@ steps:
   - wait-serial: "Button test"
 
   # Need for 1s delay for scenario to run properly
-  - delay: 1000ms
+  - delay: 5000ms
 
   # Press once
   - set-control:
       part-id: btn1
       control: pressed
       value: 1
-  - delay: 200ms
+  - delay: 2000ms
   - set-control:
       part-id: btn1
       control: pressed
       value: 0
-  - delay: 300ms
+  - delay: 3000ms
 
   # Press 2nd time
   - set-control:
       part-id: btn1
       control: pressed
       value: 1
-  - delay: 200ms
+  - delay: 2000ms
   - set-control:
       part-id: btn1
       control: pressed
       value: 0
-  - delay: 300ms
+  - delay: 3000ms
 
   # Press for the 3rd time
   - set-control:
diff --git a/tests/validation/i2c_master/ci.json b/tests/validation/i2c_master/ci.json
new file mode 100644
index 00000000000..2b8792cd131
--- /dev/null
+++ b/tests/validation/i2c_master/ci.json
@@ -0,0 +1,9 @@
+{
+  "platforms": {
+    "hardware": false,
+    "qemu": false
+  },
+  "requires": [
+    "CONFIG_SOC_I2C_SUPPORTED=y"
+  ]
+}
diff --git a/tests/validation/i2c_master/diagram.esp32.json b/tests/validation/i2c_master/diagram.esp32.json
new file mode 100644
index 00000000000..28e5d2e9c23
--- /dev/null
+++ b/tests/validation/i2c_master/diagram.esp32.json
@@ -0,0 +1,24 @@
+{
+  "version": 1,
+  "author": "lucasssvaz",
+  "editor": "wokwi",
+  "parts": [
+    {
+      "type": "board-esp32-devkit-c-v4",
+      "id": "esp32",
+      "top": -57.6,
+      "left": -177.56,
+      "attrs": {}
+    },
+    { "type": "wokwi-ds1307", "id": "rtc1", "top": -43.8, "left": -19.1, "attrs": {} }
+  ],
+  "connections": [
+    [ "esp32:RX", "$serialMonitor:TX", "", [] ],
+    [ "esp32:TX", "$serialMonitor:RX", "", [] ],
+    [ "esp32:22", "rtc1:SCL", "green", [ "h38.4", "v-9.6" ] ],
+    [ "esp32:21", "rtc1:SDA", "blue", [ "h48", "v-28.8", "h19.2" ] ],
+    [ "esp32:GND.2", "rtc1:GND", "black", [ "v0" ] ],
+    [ "rtc1:5V", "esp32:5V", "red", [ "h-28.8", "v-67.6", "h-172.8", "v230.4" ] ]
+  ],
+  "dependencies": {}
+}
diff --git a/tests/validation/i2c_master/diagram.esp32c3.json b/tests/validation/i2c_master/diagram.esp32c3.json
new file mode 100644
index 00000000000..a7471ec3ca1
--- /dev/null
+++ b/tests/validation/i2c_master/diagram.esp32c3.json
@@ -0,0 +1,25 @@
+{
+  "version": 1,
+  "author": "lucasssvaz",
+  "editor": "wokwi",
+  "parts": [
+    {
+      "type": "board-esp32-c3-devkitm-1",
+      "id": "esp32",
+      "top": -57.6,
+      "left": -177.56,
+      "attrs": {}
+    },
+    { "type": "wokwi-ds1307", "id": "rtc1", "top": -43.8, "left": -19.1, "attrs": {} }
+  ],
+  "connections": [
+    [ "esp32:RX", "$serialMonitor:TX", "", [] ],
+    [ "esp32:TX", "$serialMonitor:RX", "", [] ],
+    [ "rtc1:5V", "esp32:5V", "red", [ "h-28.8", "v-67.6", "h-172.8", "v230.4" ] ],
+    [ "esp32:5V.1", "rtc1:5V", "red", [ "h-18.22", "v-144.3", "h153.6", "v48" ] ],
+    [ "esp32:GND.10", "rtc1:GND", "black", [ "h56.16", "v9.3" ] ],
+    [ "esp32:8", "rtc1:SDA", "green", [ "h17.76", "v-19.5" ] ],
+    [ "esp32:9", "rtc1:SCL", "blue", [ "h0" ] ]
+  ],
+  "dependencies": {}
+}
diff --git a/tests/validation/i2c_master/diagram.esp32c6.json b/tests/validation/i2c_master/diagram.esp32c6.json
new file mode 100644
index 00000000000..9c759682ae5
--- /dev/null
+++ b/tests/validation/i2c_master/diagram.esp32c6.json
@@ -0,0 +1,26 @@
+{
+  "version": 1,
+  "author": "lucasssvaz",
+  "editor": "wokwi",
+  "parts": [
+    {
+      "type": "board-esp32-c6-devkitc-1",
+      "id": "esp32",
+      "top": -57.6,
+      "left": -177.56,
+      "attrs": {}
+    },
+    { "type": "wokwi-ds1307", "id": "rtc1", "top": -43.8, "left": -19.1, "attrs": {} }
+  ],
+  "connections": [
+    [ "esp32:RX", "$serialMonitor:TX", "", [] ],
+    [ "esp32:TX", "$serialMonitor:RX", "", [] ],
+    [ "rtc1:5V", "esp32:5V", "red", [ "h-28.8", "v-67.6", "h-172.8", "v230.4" ] ],
+    [ "esp32:5V.1", "rtc1:5V", "red", [ "h-18.22", "v-144.3", "h153.6", "v48" ] ],
+    [ "esp32:GND.10", "rtc1:GND", "black", [ "h56.16", "v9.3" ] ],
+    [ "esp32:23", "rtc1:SDA", "green", [ "h17.38", "v-23.51" ] ],
+    [ "esp32:GND.4", "rtc1:GND", "black", [ "h55.78", "v-4.31" ] ],
+    [ "esp32:22", "rtc1:SCL", "blue", [ "h26.98", "v-23.51" ] ]
+  ],
+  "dependencies": {}
+}
diff --git a/tests/validation/i2c_master/diagram.esp32h2.json b/tests/validation/i2c_master/diagram.esp32h2.json
new file mode 100644
index 00000000000..d2a2acfecd7
--- /dev/null
+++ b/tests/validation/i2c_master/diagram.esp32h2.json
@@ -0,0 +1,24 @@
+{
+  "version": 1,
+  "author": "lucasssvaz",
+  "editor": "wokwi",
+  "parts": [
+    {
+      "type": "board-esp32-h2-devkitm-1",
+      "id": "esp32",
+      "top": -57.6,
+      "left": -177.56,
+      "attrs": {}
+    },
+    { "type": "wokwi-ds1307", "id": "rtc1", "top": -43.8, "left": -19.1, "attrs": {} }
+  ],
+  "connections": [
+    [ "esp32:RX", "$serialMonitor:TX", "", [] ],
+    [ "esp32:TX", "$serialMonitor:RX", "", [] ],
+    [ "esp32:GND.6", "rtc1:GND", "black", [ "h0" ] ],
+    [ "esp32:5V", "rtc1:5V", "red", [ "h-29.14", "v-160.97", "h172.8", "v48" ] ],
+    [ "esp32:12", "rtc1:SDA", "green", [ "h36.58", "v-36.17" ] ],
+    [ "esp32:22", "rtc1:SCL", "blue", [ "v-7.37", "h46.18", "v-38.4" ] ]
+  ],
+  "dependencies": {}
+}
diff --git a/tests/validation/i2c_master/diagram.esp32p4.json b/tests/validation/i2c_master/diagram.esp32p4.json
new file mode 100644
index 00000000000..ab250c2aafd
--- /dev/null
+++ b/tests/validation/i2c_master/diagram.esp32p4.json
@@ -0,0 +1,24 @@
+{
+  "version": 1,
+  "author": "lucasssvaz",
+  "editor": "wokwi",
+  "parts": [
+    {
+      "type": "board-esp32-p4-function-ev",
+      "id": "esp32",
+      "top": -57.6,
+      "left": -177.56,
+      "attrs": {}
+    },
+    { "type": "wokwi-ds1307", "id": "rtc1", "top": -197.4, "left": 57.7, "attrs": {} }
+  ],
+  "connections": [
+    [ "esp32:38", "$serialMonitor:TX", "", [] ],
+    [ "esp32:37", "$serialMonitor:RX", "", [] ],
+    [ "esp32:5V.1", "rtc1:5V", "red", [ "v0" ] ],
+    [ "esp32:GND.1", "rtc1:GND", "black", [ "v-133.52", "h5.53" ] ],
+    [ "esp32:7", "rtc1:SDA", "green", [ "v0" ] ],
+    [ "esp32:8", "rtc1:SCL", "blue", [ "h15.13", "v-114.12" ] ]
+  ],
+  "dependencies": {}
+}
diff --git a/tests/validation/i2c_master/diagram.esp32s2.json b/tests/validation/i2c_master/diagram.esp32s2.json
new file mode 100644
index 00000000000..c34a176bd7e
--- /dev/null
+++ b/tests/validation/i2c_master/diagram.esp32s2.json
@@ -0,0 +1,24 @@
+{
+  "version": 1,
+  "author": "lucasssvaz",
+  "editor": "wokwi",
+  "parts": [
+    {
+      "type": "board-esp32-s2-devkitm-1",
+      "id": "esp32",
+      "top": -57.6,
+      "left": -177.56,
+      "attrs": {}
+    },
+    { "type": "wokwi-ds1307", "id": "rtc1", "top": -43.8, "left": -19.1, "attrs": {} }
+  ],
+  "connections": [
+    [ "esp32:RX", "$serialMonitor:TX", "", [] ],
+    [ "esp32:TX", "$serialMonitor:RX", "", [] ],
+    [ "esp32:GND.2", "rtc1:GND", "black", [ "v0" ] ],
+    [ "rtc1:5V", "esp32:5V", "red", [ "h-28.8", "v-67.6", "h-172.8", "v230.4" ] ],
+    [ "esp32:8", "rtc1:SDA", "green", [ "h-19.47", "v-119.51", "h144", "v57.6" ] ],
+    [ "esp32:9", "rtc1:SCL", "blue", [ "h-29.07", "v-138.71", "h144", "v76.8" ] ]
+  ],
+  "dependencies": {}
+}
diff --git a/tests/validation/i2c_master/diagram.esp32s3.json b/tests/validation/i2c_master/diagram.esp32s3.json
new file mode 100644
index 00000000000..6d168fb42e6
--- /dev/null
+++ b/tests/validation/i2c_master/diagram.esp32s3.json
@@ -0,0 +1,24 @@
+{
+  "version": 1,
+  "author": "lucasssvaz",
+  "editor": "wokwi",
+  "parts": [
+    {
+      "type": "board-esp32-s3-devkitc-1",
+      "id": "esp32",
+      "top": -57.6,
+      "left": -177.56,
+      "attrs": {}
+    },
+    { "type": "wokwi-ds1307", "id": "rtc1", "top": -43.8, "left": -19.1, "attrs": {} }
+  ],
+  "connections": [
+    [ "esp32:RX", "$serialMonitor:TX", "", [] ],
+    [ "esp32:TX", "$serialMonitor:RX", "", [] ],
+    [ "esp32:GND.2", "rtc1:GND", "black", [ "v0" ] ],
+    [ "rtc1:5V", "esp32:5V", "red", [ "h-28.8", "v-67.6", "h-172.8", "v230.4" ] ],
+    [ "esp32:8", "rtc1:SDA", "green", [ "h-19.47", "v-119.51", "h144", "v32.93", "h38.35" ] ],
+    [ "esp32:9", "rtc1:SCL", "blue", [ "h-29.07", "v-138.71", "h144", "v32.93", "h47.95" ] ]
+  ],
+  "dependencies": {}
+}
diff --git a/tests/validation/i2c_master/i2c_master.ino b/tests/validation/i2c_master/i2c_master.ino
new file mode 100644
index 00000000000..41e7d2ae5f9
--- /dev/null
+++ b/tests/validation/i2c_master/i2c_master.ino
@@ -0,0 +1,319 @@
+/*
+  I2C Master Test for
+*/
+
+#include <Arduino.h>
+#include <unity.h>
+#include <Wire.h>
+#include <vector>
+#include <algorithm>
+#include <WiFi.h>
+
+#include "sdkconfig.h"
+
+/* DS1307 functions */
+
+const uint8_t DS1307_ADDR = 0x68;
+const uint8_t start_sec = 1;
+const uint8_t start_min = 2;
+const uint8_t start_hour = 3;
+const uint8_t start_day = 4;
+const uint8_t start_month = 5;
+const uint16_t start_year = 2020;
+
+static uint8_t read_sec = 0;
+static uint8_t read_min = 0;
+static uint8_t read_hour = 0;
+static uint8_t read_day = 0;
+static uint8_t read_month = 0;
+static uint16_t read_year = 0;
+static int peek_data = -1;
+
+const char *ssid = "Wokwi-GUEST";
+const char *password = "";
+
+const auto BCD2DEC = [](uint8_t num) -> uint8_t {
+  return ((num / 16 * 10) + (num % 16));
+};
+
+const auto DEC2BCD = [](uint8_t num) -> uint8_t {
+  return ((num / 10 * 16) + (num % 10));
+};
+
+void reset_read_values() {
+  read_sec = 0;
+  read_min = 0;
+  read_hour = 0;
+  read_day = 0;
+  read_month = 0;
+  read_year = 0;
+}
+
+void ds1307_start(void) {
+  uint8_t sec;
+
+  //Get seconds
+  Wire.beginTransmission(DS1307_ADDR);
+  Wire.write(0x00);
+  Wire.endTransmission();
+  Wire.requestFrom(DS1307_ADDR, 1);
+  sec = Wire.read() & 0x7F;  //Seconds without halt bit
+
+  //Set seconds and start clock
+  Wire.beginTransmission(DS1307_ADDR);
+  Wire.write(0x00);
+  Wire.write(sec);
+  Wire.endTransmission();
+}
+
+void ds1307_stop(void) {
+  uint8_t sec;
+
+  //Get seconds
+  Wire.beginTransmission(DS1307_ADDR);
+  Wire.write(0x00);
+  Wire.endTransmission();
+  Wire.requestFrom(DS1307_ADDR, 1);
+  sec = Wire.read() | 0x80;  //Seconds with halt bit
+
+  //Set seconds and halt clock
+  Wire.beginTransmission(DS1307_ADDR);
+  Wire.write(0x00);
+  Wire.write(sec);
+  Wire.endTransmission();
+}
+
+void ds1307_get_time(uint8_t *sec, uint8_t *min, uint8_t *hour, uint8_t *day, uint8_t *month, uint16_t *year) {
+  //Get time
+  Wire.beginTransmission(DS1307_ADDR);
+  Wire.write(0x00);
+  Wire.endTransmission();
+  Wire.requestFrom(DS1307_ADDR, 7);
+
+  TEST_ASSERT_EQUAL(7, Wire.available());
+
+  if (peek_data == -1 && Wire.peek() != -1) {
+    peek_data = Wire.peek();
+  }
+
+  *sec = BCD2DEC(Wire.read() & 0x7F);  //Seconds without halt bit
+  *min = BCD2DEC(Wire.read());
+  *hour = BCD2DEC(Wire.read() & 0x3F);
+  Wire.read();  //Ignore day of week
+  *day = BCD2DEC(Wire.read());
+  *month = BCD2DEC(Wire.read());
+  *year = BCD2DEC(Wire.read()) + 2000;
+}
+
+void ds1307_set_time(uint8_t sec, uint8_t min, uint8_t hour, uint8_t day, uint8_t month, uint16_t year) {
+  Wire.beginTransmission(DS1307_ADDR);
+  Wire.write(0x00);
+  Wire.write(DEC2BCD(sec));
+  Wire.write(DEC2BCD(min));
+  Wire.write(DEC2BCD(hour));
+  Wire.write(DEC2BCD(0));  //Ignore day of week
+  Wire.write(DEC2BCD(day));
+  Wire.write(DEC2BCD(month));
+  Wire.write(DEC2BCD(year - 2000));
+  Wire.endTransmission();
+}
+
+/* Unity functions */
+
+// This function is automatically called by unity before each test is run
+void setUp(void) {
+  reset_read_values();
+  Wire.begin();
+}
+
+// This function is automatically called by unity after each test is run
+void tearDown(void) {
+  //Reset time
+  ds1307_set_time(start_sec, start_min, start_hour, start_day, start_month, start_year);
+
+  Wire.end();
+}
+
+void rtc_set_time() {
+  //Set time
+  ds1307_set_time(start_sec, start_min, start_hour, start_day, start_month, start_year);
+
+  //Get time
+  ds1307_get_time(&read_sec, &read_min, &read_hour, &read_day, &read_month, &read_year);
+
+  //Check time
+  TEST_ASSERT_EQUAL(start_sec, read_sec);
+  TEST_ASSERT_EQUAL(start_min, read_min);
+  TEST_ASSERT_EQUAL(start_hour, read_hour);
+  TEST_ASSERT_EQUAL(start_day, read_day);
+  TEST_ASSERT_EQUAL(start_month, read_month);
+  TEST_ASSERT_EQUAL(start_year, read_year);
+}
+
+void rtc_run_clock() {
+  uint8_t old_sec = 0;
+
+  //Run clock for 5 seconds
+  ds1307_start();
+  delay(5000);
+  ds1307_stop();
+
+  //Get time
+  ds1307_get_time(&read_sec, &read_min, &read_hour, &read_day, &read_month, &read_year);
+
+  //Check time
+  TEST_ASSERT_NOT_EQUAL(start_sec, read_sec);  //Seconds should have changed
+  TEST_ASSERT_EQUAL(start_min, read_min);
+  TEST_ASSERT_EQUAL(start_hour, read_hour);
+  TEST_ASSERT_EQUAL(start_day, read_day);
+  TEST_ASSERT_EQUAL(start_month, read_month);
+  TEST_ASSERT_EQUAL(start_year, read_year);
+
+  old_sec = read_sec;
+  reset_read_values();
+
+  //Get time again to check that clock is stopped
+  delay(2000);
+  ds1307_get_time(&read_sec, &read_min, &read_hour, &read_day, &read_month, &read_year);
+
+  //Check time
+  TEST_ASSERT_EQUAL(old_sec, read_sec);
+  TEST_ASSERT_EQUAL(start_min, read_min);
+  TEST_ASSERT_EQUAL(start_hour, read_hour);
+  TEST_ASSERT_EQUAL(start_day, read_day);
+  TEST_ASSERT_EQUAL(start_month, read_month);
+  TEST_ASSERT_EQUAL(start_year, read_year);
+}
+
+void change_clock() {
+  //Get time
+  ds1307_get_time(&read_sec, &read_min, &read_hour, &read_day, &read_month, &read_year);
+
+  //Check time
+  TEST_ASSERT_EQUAL(start_sec, read_sec);
+  TEST_ASSERT_EQUAL(start_min, read_min);
+  TEST_ASSERT_EQUAL(start_hour, read_hour);
+  TEST_ASSERT_EQUAL(start_day, read_day);
+  TEST_ASSERT_EQUAL(start_month, read_month);
+  TEST_ASSERT_EQUAL(start_year, read_year);
+
+  Wire.setClock(400000);
+  reset_read_values();
+
+  TEST_ASSERT_EQUAL(400000, Wire.getClock());
+
+  //Get time
+  ds1307_get_time(&read_sec, &read_min, &read_hour, &read_day, &read_month, &read_year);
+
+  //Check time
+  TEST_ASSERT_EQUAL(start_sec, read_sec);
+  TEST_ASSERT_EQUAL(start_min, read_min);
+  TEST_ASSERT_EQUAL(start_hour, read_hour);
+  TEST_ASSERT_EQUAL(start_day, read_day);
+  TEST_ASSERT_EQUAL(start_month, read_month);
+  TEST_ASSERT_EQUAL(start_year, read_year);
+}
+
+void swap_pins() {
+  Wire.setPins(SCL, SDA);
+  Wire.begin();
+  //Set time
+  ds1307_set_time(start_sec, start_min, start_hour, start_day, start_month, start_year);
+
+  //Get time
+  ds1307_get_time(&read_sec, &read_min, &read_hour, &read_day, &read_month, &read_year);
+
+  //Check time
+  TEST_ASSERT_EQUAL(start_sec, read_sec);
+  TEST_ASSERT_EQUAL(start_min, read_min);
+  TEST_ASSERT_EQUAL(start_hour, read_hour);
+  TEST_ASSERT_EQUAL(start_day, read_day);
+  TEST_ASSERT_EQUAL(start_month, read_month);
+  TEST_ASSERT_EQUAL(start_year, read_year);
+
+  Wire.setPins(SDA, SCL);
+}
+
+void test_api() {
+  int integer_ret;
+
+  // Set Buffer Size
+  integer_ret = Wire.setBufferSize(32);
+  TEST_ASSERT_EQUAL(32, integer_ret);
+  integer_ret = Wire.setBufferSize(I2C_BUFFER_LENGTH);
+  TEST_ASSERT_EQUAL(I2C_BUFFER_LENGTH, integer_ret);
+
+  // Set TimeOut
+  Wire.setTimeOut(100);
+  TEST_ASSERT_EQUAL(100, Wire.getTimeOut());
+
+  // Check if buffer can be peeked
+  TEST_ASSERT_GREATER_THAN(-1, peek_data);
+
+  Wire.flush();
+}
+
+bool device_found() {
+  uint8_t err;
+
+  for (uint8_t address = 1; address < 127; ++address) {
+    Wire.beginTransmission(address);
+    err = Wire.endTransmission();
+    log_d("Address: 0x%02X, Error: %d", address, err);
+    if (err == 0) {
+      log_i("Found device at address: 0x%02X", address);
+    } else if (address == DS1307_ADDR) {
+      log_e("Failed to find DS1307");
+      return false;
+    }
+  }
+
+  return true;
+}
+
+void scan_bus() {
+  TEST_ASSERT_TRUE(device_found());
+}
+
+#if SOC_WIFI_SUPPORTED
+void scan_bus_with_wifi() {
+  // delete old config
+  WiFi.disconnect(true, true, 1000);
+  delay(1000);
+  WiFi.begin(ssid, password);
+  delay(5000);
+  bool found = device_found();
+  WiFi.disconnect(true, true, 1000);
+
+  TEST_ASSERT_TRUE(found);
+}
+#endif
+
+/* Main */
+
+void setup() {
+  Serial.begin(115200);
+  while (!Serial) {
+    delay(10);
+  }
+
+  log_d("Starting I2C Master");
+  Wire.begin();
+
+  log_d("Starting tests");
+  UNITY_BEGIN();
+  RUN_TEST(scan_bus);
+#if SOC_WIFI_SUPPORTED
+  RUN_TEST(scan_bus_with_wifi);
+#endif
+  RUN_TEST(rtc_set_time);
+  RUN_TEST(rtc_run_clock);
+  RUN_TEST(change_clock);
+  RUN_TEST(swap_pins);
+  RUN_TEST(test_api);
+  UNITY_END();
+}
+
+void loop() {
+  vTaskDelete(NULL);
+}
diff --git a/tests/validation/i2c_master/test_i2c_master.py b/tests/validation/i2c_master/test_i2c_master.py
new file mode 100644
index 00000000000..da5f790c0f8
--- /dev/null
+++ b/tests/validation/i2c_master/test_i2c_master.py
@@ -0,0 +1,2 @@
+def test_i2c_master(dut):
+    dut.expect_unity_test_output(timeout=240)
diff --git a/tests/validation/nvs/ci.json b/tests/validation/nvs/ci.json
index bddf221e3c0..7f8ce83ec54 100644
--- a/tests/validation/nvs/ci.json
+++ b/tests/validation/nvs/ci.json
@@ -28,6 +28,12 @@
       "espressif:esp32:esp32s3:PSRAM=opi,USBMode=default,PartitionScheme=huge_app,FlashMode=qio",
       "espressif:esp32:esp32s3:PSRAM=opi,USBMode=default,PartitionScheme=huge_app,FlashMode=qio120",
       "espressif:esp32:esp32s3:PSRAM=opi,USBMode=default,PartitionScheme=huge_app,FlashMode=dio"
+    ],
+    "esp32p4": [
+      "espressif:esp32:esp32p4:PSRAM=enabled,USBMode=default,PartitionScheme=huge_app,FlashMode=dio",
+      "espressif:esp32:esp32p4:PSRAM=enabled,USBMode=default,PartitionScheme=huge_app,FlashMode=dio,FlashFreq=40",
+      "espressif:esp32:esp32p4:PSRAM=enabled,USBMode=default,PartitionScheme=huge_app,FlashMode=qio",
+      "espressif:esp32:esp32p4:PSRAM=enabled,USBMode=default,PartitionScheme=huge_app,FlashMode=qio,FlashFreq=40"
     ]
   },
   "platforms": {
diff --git a/tests/validation/psram/ci.json b/tests/validation/psram/ci.json
index 341df103671..999d3be953e 100644
--- a/tests/validation/psram/ci.json
+++ b/tests/validation/psram/ci.json
@@ -1,7 +1,6 @@
 {
   "platforms": {
-    "qemu": false,
-    "wokwi": false
+    "qemu": false
   },
   "requires": [
     "CONFIG_SPIRAM=y"
diff --git a/tests/validation/psram/diagram.esp32s3.json b/tests/validation/psram/diagram.esp32s3.json
new file mode 100644
index 00000000000..837ff1eed33
--- /dev/null
+++ b/tests/validation/psram/diagram.esp32s3.json
@@ -0,0 +1,24 @@
+{
+  "version": 1,
+  "author": "lucasssvaz",
+  "editor": "wokwi",
+  "parts": [
+    {
+      "type": "board-esp32-s3-devkitc-1",
+      "id": "esp",
+      "attrs": { "psramType": "octal" }
+    }
+  ],
+  "connections": [
+    [
+      "esp:TX",
+      "$serialMonitor:RX",
+      ""
+    ],
+    [
+      "esp:RX",
+      "$serialMonitor:TX",
+      ""
+    ]
+  ]
+}
diff --git a/tests/validation/psram/psram.ino b/tests/validation/psram/psram.ino
index 1304fe85cc1..7bf7bc11c5d 100644
--- a/tests/validation/psram/psram.ino
+++ b/tests/validation/psram/psram.ino
@@ -4,6 +4,12 @@
 #define MAX_TEST_SIZE 512 * 1024  // 512KB
 
 void *buf = NULL;
+uint32_t psram_size = 0;
+
+void psram_found(void) {
+  psram_size = ESP.getPsramSize();
+  TEST_ASSERT_TRUE(psram_size > 0);
+}
 
 void test_malloc_success(void) {
   buf = ps_malloc(MAX_TEST_SIZE);
@@ -96,6 +102,13 @@ void setup() {
   }
 
   UNITY_BEGIN();
+  RUN_TEST(psram_found);
+
+  if (psram_size == 0) {
+    UNITY_END();
+    return;
+  }
+
   RUN_TEST(test_malloc_success);
   RUN_TEST(test_malloc_fail);
   RUN_TEST(test_calloc_success);
@@ -104,8 +117,11 @@ void setup() {
   RUN_TEST(test_memset_all_zeroes);
   RUN_TEST(test_memset_all_ones);
   RUN_TEST(test_memset_alternating);
+#ifndef CONFIG_IDF_TARGET_ESP32P4
+  // These tests are taking too long on ESP32-P4 in Wokwi
   RUN_TEST(test_memset_random);
   RUN_TEST(test_memcpy);
+#endif
   UNITY_END();
 }
 
diff --git a/tests/validation/uart/diagram.esp32.json b/tests/validation/uart/diagram.esp32.json
index a31c06d8313..c2fbd952fd0 100644
--- a/tests/validation/uart/diagram.esp32.json
+++ b/tests/validation/uart/diagram.esp32.json
@@ -6,7 +6,7 @@
     {
       "type": "board-esp32-devkit-c-v4",
       "id": "esp",
-      "attrs": { "cpuFrequency": "40" }
+      "attrs": { "cpuFrequency": "120" }
     }
   ],
   "connections": [
diff --git a/tests/validation/uart/uart.ino b/tests/validation/uart/uart.ino
index 358276c00b4..794fc9affc2 100644
--- a/tests/validation/uart/uart.ino
+++ b/tests/validation/uart/uart.ino
@@ -53,6 +53,8 @@ public:
     : uart_num(num), serial(serial_ref), peeked_char(-1), default_rx_pin(rx_pin), default_tx_pin(tx_pin), recv_msg("") {}
 
   void begin(unsigned long baudrate) {
+    // pinMode will force enabling the internal pullup resistor (IDF 5.3.2 Change)
+    pinMode(default_rx_pin, INPUT_PULLUP);
     serial.begin(baudrate, SERIAL_8N1, default_rx_pin, default_tx_pin);
     while (!serial) {
       delay(10);
@@ -365,6 +367,8 @@ void change_pins_test(void) {
 
   if (TEST_UART_NUM == 1) {
     UARTTestConfig &config = *uart_test_configs[0];
+    // pinMode will force enabling the internal pullup resistor (IDF 5.3.2 Change)
+    pinMode(NEW_RX1, INPUT_PULLUP);
     config.serial.setPins(NEW_RX1, NEW_TX1);
     TEST_ASSERT_EQUAL(NEW_RX1, uart_get_RxPin(config.uart_num));
     TEST_ASSERT_EQUAL(NEW_TX1, uart_get_TxPin(config.uart_num));
diff --git a/tools/partitions/default_32MB.csv b/tools/partitions/default_32MB.csv
new file mode 100644
index 00000000000..dd07ac32185
--- /dev/null
+++ b/tools/partitions/default_32MB.csv
@@ -0,0 +1,7 @@
+# Name,   Type, SubType, Offset,  Size, Flags
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0xC80000,
+app1,     app,  ota_1,   0xC90000,0xC80000,
+spiffs,   data, spiffs,  0x1910000,0x6C0000,
+coredump, data, coredump,0x1FF0000,0x10000,
diff --git a/variants/Geekble_ESP32C3/pins_arduino.h b/variants/Geekble_ESP32C3/pins_arduino.h
index 4eec3aa2f68..660313ce849 100644
--- a/variants/Geekble_ESP32C3/pins_arduino.h
+++ b/variants/Geekble_ESP32C3/pins_arduino.h
@@ -27,6 +27,6 @@ static const uint8_t A1 = 1;
 static const uint8_t A2 = 2;
 static const uint8_t A3 = 3;
 static const uint8_t A4 = 4;
-static const uint8_t A5 = 5;
+//static const uint8_t A5 = 5;  // ADC1 no longer supported
 
 #endif /* Pins_Arduino_h */
diff --git a/variants/Geekble_Nano_ESP32S3/pins_arduino.h b/variants/Geekble_Nano_ESP32S3/pins_arduino.h
new file mode 100644
index 00000000000..657c0d5d51b
--- /dev/null
+++ b/variants/Geekble_Nano_ESP32S3/pins_arduino.h
@@ -0,0 +1,74 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID          0x303a
+#define USB_PID          0x82C5
+#define USB_MANUFACTURER "Geekble"
+#define USB_PRODUCT      "Geekble nano ESP32-S3"
+#define USB_SERIAL       ""  // Empty string for MAC address
+
+static const uint8_t D0 = 44;  // also RX
+static const uint8_t D1 = 43;  // also TX
+static const uint8_t D2 = 5;
+static const uint8_t D3 = 6;  // also CTS
+static const uint8_t D4 = 7;  // also DSR
+static const uint8_t D5 = 8;
+static const uint8_t D6 = 9;
+static const uint8_t D7 = 10;
+static const uint8_t D8 = 17;
+static const uint8_t D9 = 18;
+static const uint8_t D10 = 21;  // also SS
+static const uint8_t D11 = 38;  // also MOSI
+static const uint8_t D12 = 47;  // also MISO
+static const uint8_t D13 = 48;  // also SCK, LED_BUILTIN
+
+static const uint8_t A0 = 1;  // also DTR
+static const uint8_t A1 = 2;
+static const uint8_t A2 = 3;
+static const uint8_t A3 = 4;
+static const uint8_t A4 = 11;  // also SDA
+static const uint8_t A5 = 12;  // also SCL
+static const uint8_t A6 = 13;
+static const uint8_t A7 = 14;
+
+// alternate pin functions
+
+static const uint8_t LED_BUILTIN = D13;
+#define BUILTIN_LED LED_BUILTIN  // backward compatibility
+#define LED_BUILTIN LED_BUILTIN  // allow testing #ifdef LED_BUILTIN
+
+static const uint8_t SW_BUILTIN = 0;
+
+static const uint8_t TX = D1;
+static const uint8_t RX = D0;
+static const uint8_t RTS = 45;
+static const uint8_t CTS = D3;
+static const uint8_t DTR = A0;
+static const uint8_t DSR = D4;
+
+static const uint8_t SS = D10;
+static const uint8_t MOSI = D11;
+static const uint8_t MISO = D12;
+static const uint8_t SCK = D13;
+
+static const uint8_t SDA = A4;
+static const uint8_t SCL = A5;
+
+// Touch input capable pins on the header
+static const uint8_t T1 = 1;
+static const uint8_t T2 = 2;
+static const uint8_t T3 = 3;
+static const uint8_t T4 = 4;
+static const uint8_t T5 = 5;
+static const uint8_t T6 = 6;
+static const uint8_t T7 = 7;
+
+#define PIN_I2S_SCK    D7
+#define PIN_I2S_FS     D8
+#define PIN_I2S_SD     D9
+#define PIN_I2S_SD_OUT D9  // same as bidir
+#define PIN_I2S_SD_IN  D10
+
+#endif /* Pins_Arduino_h */
diff --git a/variants/cyobot_v2_esp32s3/pins_arduino.h b/variants/cyobot_v2_esp32s3/pins_arduino.h
new file mode 100644
index 00000000000..45f0968ef2a
--- /dev/null
+++ b/variants/cyobot_v2_esp32s3/pins_arduino.h
@@ -0,0 +1,52 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_MANUFACTURER "CYOBot"
+#define USB_PRODUCT      "CYOBrain ESP32S3"
+#define USB_SERIAL       ""  // Empty string for MAC address
+
+static const uint8_t BUTTON0 = 4;
+static const uint8_t BUTTON1 = 38;
+static const uint8_t LED = 24;
+
+static const uint8_t BAT_MEAS = 6;
+static const uint8_t CHAR_DET = 23;
+
+static const uint8_t NEO_BASE = 7;
+static const uint8_t NEO_BRAIN = 15;
+
+static const uint8_t I2S0_MCLK = 16;
+static const uint8_t I2S0_DSDIN = 8;
+static const uint8_t I2S0_SCLK = 9;
+static const uint8_t I2S0_LRCK = 45;
+
+static const uint8_t SDA = 17;
+static const uint8_t SCL = 18;
+
+static const uint8_t SS = 5;
+static const uint8_t MOSI = 2;
+static const uint8_t MISO = 42;
+static const uint8_t SCK = 41;
+
+static const uint8_t ENCODER1_A = 39;
+static const uint8_t ENCODER1_B = 40;
+static const uint8_t ENCODER2_B = 19;
+static const uint8_t ENCODER2_A = 20;
+
+static const uint8_t UART1_RXD = 3;
+static const uint8_t UART1_TXD = 1;
+
+static const uint8_t GPIO46 = 46;
+static const uint8_t ESP_IO0 = 0;
+
+static const uint8_t SD_OUT = 10;
+static const uint8_t SD_SPI_MOSI = 11;
+static const uint8_t SD_SPI_CLK = 12;
+static const uint8_t SD_SPI_MISO = 13;
+static const uint8_t SD_SPI_CS = 14;
+
+static const uint8_t PA_CTRL = 25;
+
+#endif /* Pins_Arduino_h */
diff --git a/variants/esp32c6/pins_arduino.h b/variants/esp32c6/pins_arduino.h
index 55afea91565..348db9f907e 100644
--- a/variants/esp32c6/pins_arduino.h
+++ b/variants/esp32c6/pins_arduino.h
@@ -32,4 +32,9 @@ static const uint8_t A4 = 4;
 static const uint8_t A5 = 5;
 static const uint8_t A6 = 6;
 
+// LP I2C Pins are fixed on ESP32-C6
+#define WIRE1_PIN_DEFINED
+static const uint8_t SDA1 = 6;
+static const uint8_t SCL1 = 7;
+
 #endif /* Pins_Arduino_h */
diff --git a/variants/esp32s3usbotg/pins_arduino.h b/variants/esp32s3usbotg/pins_arduino.h
index 004055cde49..5b873e2d2f1 100644
--- a/variants/esp32s3usbotg/pins_arduino.h
+++ b/variants/esp32s3usbotg/pins_arduino.h
@@ -2,6 +2,7 @@
 #define Pins_Arduino_h
 
 #include <stdint.h>
+#include <stdbool.h>
 
 #define USB_VID 0x303a
 #define USB_PID 0x1001
diff --git a/variants/lilygo_tlora_pager/pins_arduino.h b/variants/lilygo_tlora_pager/pins_arduino.h
new file mode 100644
index 00000000000..1a1d8e5da3f
--- /dev/null
+++ b/variants/lilygo_tlora_pager/pins_arduino.h
@@ -0,0 +1,100 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#ifndef digitalPinToInterrupt
+#define digitalPinToInterrupt(p) (((p) < 48) ? (p) : -1)
+#endif
+
+#define USB_VID          0x303a
+#define USB_PID          0x82D1
+#define USB_MANUFACTURER "LILYGO"
+#define USB_PRODUCT      "T-LoRa-Pager"
+
+// ST7796
+#define DISP_WIDTH  (222)
+#define DISP_HEIGHT (480)
+#define SD_CS       (21)
+
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+//BHI260,PCF85063,BQ25896,DRV2605L,ES8311 share I2C Bus
+static const uint8_t SDA = 2;
+static const uint8_t SCL = 3;
+
+// Default sd cs pin
+static const uint8_t SS = SD_CS;
+static const uint8_t MOSI = 34;
+static const uint8_t MISO = 33;
+static const uint8_t SCK = 35;
+
+#define KB_INT       (6)
+#define KB_BACKLIGHT (46)
+
+// Rotary
+#define ROTARY_A (40)
+#define ROTARY_B (41)
+#define ROTARY_C (7)
+
+// Interrupt IO port
+#define RTC_INT    (1)
+#define NFC_INT    (5)
+#define SENSOR_INT (8)
+#define NFC_CS     (39)
+
+// ES8311
+#define I2S_WS    (18)
+#define I2S_SCK   (11)
+#define I2S_MCLK  (10)
+#define I2S_SDOUT (45)
+#define I2S_SDIN  (17)
+
+// GPS
+#define GPS_TX  (12)
+#define GPS_RX  (4)
+#define GPS_PPS (13)
+
+// LoRa, SD, ST25R3916 card share SPI bus
+#define LORA_SCK  (SCK)   // share spi bus
+#define LORA_MISO (MISO)  // share spi bus
+#define LORA_MOSI (MOSI)  // share spi bus
+#define LORA_CS   (36)
+#define LORA_RST  (47)
+#define LORA_BUSY (48)
+#define LORA_IRQ  (14)
+
+// SPI interface display
+#define DISP_MOSI (MOSI)
+#define DISP_MISO (MISO)
+#define DISP_SCK  (SCK)
+#define DISP_RST  (-1)
+#define DISP_CS   (38)
+#define DISP_DC   (37)
+#define DISP_BL   (42)
+
+// External expansion chip IO definition
+#define EXPANDS_DRV_EN   (0)
+#define EXPANDS_AMP_EN   (1)
+#define EXPANDS_KB_RST   (2)
+#define EXPANDS_LORA_EN  (3)
+#define EXPANDS_GPS_EN   (4)
+#define EXPANDS_NFC_EN   (5)
+#define EXPANDS_DISP_RST (6)
+#define EXPANDS_GPS_RST  (7)
+#define EXPANDS_KB_EN    (8)
+#define EXPANDS_GPIO_EN  (9)
+
+// Peripheral definition exists
+#define USING_AUDIO_CODEC
+#define USING_XL9555_EXPANDS
+#define USING_PPM_MANAGE
+#define USING_BQ_GAUGE
+#define USING_INPUT_DEV_ROTARY
+#define USING_INPUT_DEV_KEYBOARD
+#define USING_ST25R3916
+#define USING_BHI260_SENSOR
+#define HAS_SD_CARD_SOCKET
+
+#endif /* Pins_Arduino_h */
diff --git a/variants/lilygo_twatch_s3/pins_arduino.h b/variants/lilygo_twatch_s3/pins_arduino.h
index 59434161d98..b184dc9ba17 100644
--- a/variants/lilygo_twatch_s3/pins_arduino.h
+++ b/variants/lilygo_twatch_s3/pins_arduino.h
@@ -66,4 +66,11 @@ static const uint8_t SCK = 3;
 #define GPS_TX (TX)
 #define GPS_RX (RX)
 
+// Peripheral definition exists
+#define USING_PCM_AMPLIFIER
+#define USING_PDM_MICROPHONE
+#define USING_PMU_MANAGE
+#define USING_INPUT_DEV_TOUCHPAD
+#define USING_IR_REMOTE
+
 #endif /* Pins_Arduino_h */
diff --git a/variants/lilygo_twatch_ultra/pins_arduino.h b/variants/lilygo_twatch_ultra/pins_arduino.h
index 57f6c2c3fea..c90c1ba584e 100644
--- a/variants/lilygo_twatch_ultra/pins_arduino.h
+++ b/variants/lilygo_twatch_ultra/pins_arduino.h
@@ -12,27 +12,25 @@
 #define USB_MANUFACTURER "LILYGO"
 #define USB_PRODUCT      "T-Watch-Ultra"
 
-#define DISP_WIDTH  (240)
-#define DISP_HEIGHT (296)
-
-#define DISP_D0  (39)
-#define DISP_D1  (40)
-#define DISP_D2  (45)
-#define DISP_D3  (42)
-#define DISP_SCK (41)
-#define DISP_RST (6)
-#define DISP_CS  (38)
-#define DISP_TE  (37)
-
-// touch screen
-#define TP_INT (12)
-#define TP_RST (46)
+#define DISP_WIDTH  502
+#define DISP_HEIGHT 410
+
+// QSPI interface display
+#define DISP_D0  (38)
+#define DISP_D1  (39)
+#define DISP_D2  (42)
+#define DISP_D3  (45)
+#define DISP_SCK (40)
+#define DISP_CS  (41)
+#define DISP_TE  (6)
+
 // Interrupt IO port
+#define TP_INT     (12)
 #define RTC_INT    (1)
 #define PMU_INT    (7)
 #define NFC_INT    (5)
 #define SENSOR_INT (8)
-#define NFC_RST    (4)
+#define NFC_CS     (4)
 
 // PDM microphone
 #define MIC_SCK (17)
@@ -59,8 +57,9 @@ static const uint8_t MOSI = 34;
 static const uint8_t MISO = 33;
 static const uint8_t SCK = 35;
 
-#define GPS_TX (TX)
-#define GPS_RX (RX)
+#define GPS_TX  (TX)
+#define GPS_RX  (RX)
+#define GPS_PPS (13)
 
 #define TP_SDA (SDA)
 #define TP_SCL (SCL)
@@ -74,4 +73,20 @@ static const uint8_t SCK = 35;
 #define LORA_BUSY (48)
 #define LORA_IRQ  (14)
 
+// External expansion chip IO definition
+#define EXPANDS_DRV_EN    (6)
+#define EXPANDS_DISP_EN   (7)
+#define EXPANDS_TOUCH_RST (10)
+#define EXPANDS_DISP_RST  (11)
+
+// Peripheral definition exists
+#define USING_XL9555_EXPANDS
+#define USING_PCM_AMPLIFIER
+#define USING_PDM_MICROPHONE
+#define USING_PMU_MANAGE
+#define USING_INPUT_DEV_TOUCHPAD
+#define USING_ST25R3916
+#define USING_BHI260_SENSOR
+#define HAS_SD_CARD_SOCKET
+
 #endif /* Pins_Arduino_h */
diff --git a/variants/lolin_c3_mini/pins_arduino.h b/variants/lolin_c3_mini/pins_arduino.h
index c7357975ac7..0236f02267d 100644
--- a/variants/lolin_c3_mini/pins_arduino.h
+++ b/variants/lolin_c3_mini/pins_arduino.h
@@ -2,10 +2,18 @@
 #define Pins_Arduino_h
 
 #include <stdint.h>
+#include "soc/soc_caps.h"
 
-static const uint8_t LED_BUILTIN = 7;
+// based on https://www.wemos.cc/en/latest/c3/c3_mini.html
+// WS2812 RGB LED on pin 7
+#define PIN_RGB_LED 7
+// BUILTIN_LED can be used in new Arduino API digitalWrite() like in Blink.ino
+static const uint8_t LED_BUILTIN = SOC_GPIO_PIN_COUNT + PIN_RGB_LED;
 #define BUILTIN_LED LED_BUILTIN  // backward compatibility
 #define LED_BUILTIN LED_BUILTIN  // allow testing #ifdef LED_BUILTIN
+// RGB_BUILTIN and RGB_BRIGHTNESS can be used in new Arduino API rgbLedWrite()
+#define RGB_BUILTIN    LED_BUILTIN
+#define RGB_BRIGHTNESS 64
 
 static const uint8_t TX = 21;
 static const uint8_t RX = 20;
diff --git a/variants/lolin_c3_pico/pins_arduino.h b/variants/lolin_c3_pico/pins_arduino.h
index 8d4cfc5c4f0..45087c3f9fc 100644
--- a/variants/lolin_c3_pico/pins_arduino.h
+++ b/variants/lolin_c3_pico/pins_arduino.h
@@ -4,10 +4,18 @@
 #define Pins_Arduino_h
 
 #include <stdint.h>
+#include "soc/soc_caps.h"
 
-static const uint8_t LED_BUILTIN = 7;
+// based on https://www.wemos.cc/en/latest/c3/c3_pico.html
+// WS2812 RGB LED on pin 7
+#define PIN_RGB_LED 7
+// BUILTIN_LED can be used in new Arduino API digitalWrite() like in Blink.ino
+static const uint8_t LED_BUILTIN = SOC_GPIO_PIN_COUNT + PIN_RGB_LED;
 #define BUILTIN_LED LED_BUILTIN  // backward compatibility
 #define LED_BUILTIN LED_BUILTIN  // allow testing #ifdef LED_BUILTIN
+// RGB_BUILTIN and RGB_BRIGHTNESS can be used in new Arduino API rgbLedWrite()
+#define RGB_BUILTIN    LED_BUILTIN
+#define RGB_BRIGHTNESS 64
 
 static const uint8_t TX = 21;
 static const uint8_t RX = 20;
@@ -17,7 +25,7 @@ static const uint8_t SCL = 10;
 
 static const uint8_t VBAT = 3;
 
-static const uint8_t SCK = 2;
+static const uint8_t SCK = 1;
 static const uint8_t MISO = 0;
 static const uint8_t MOSI = 4;
 static const uint8_t SS = 5;
diff --git a/variants/um_feathers3/pins_arduino.h b/variants/um_feathers3/pins_arduino.h
index 8de87c688a9..1c81339c88e 100644
--- a/variants/um_feathers3/pins_arduino.h
+++ b/variants/um_feathers3/pins_arduino.h
@@ -16,6 +16,10 @@ static const uint8_t RX = 44;
 static const uint8_t SDA = 8;
 static const uint8_t SCL = 9;
 
+#define WIRE1_PIN_DEFINED 1  // See Wire.cpp at bool TwoWire::initPins(int sdaPin, int sclPin)
+static const uint8_t SDA1 = 16;
+static const uint8_t SCL1 = 15;
+
 static const uint8_t SS = 5;
 static const uint8_t MOSI = 35;
 static const uint8_t MISO = 37;