diff --git a/variants/amox_ion_esp32s3/pins_arduino.h b/variants/amox_ion_esp32s3/pins_arduino.h
new file mode 100644
index 00000000000..06f6e421d99
--- /dev/null
+++ b/variants/amox_ion_esp32s3/pins_arduino.h
@@ -0,0 +1,58 @@
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+#include "soc/soc_caps.h"
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+#define USB_MANUFACTURER "AMOX"
+#define USB_PRODUCT      "ION Control ESP32-S3"
+#define USB_SERIAL       ""  // Empty string for MAC address
+
+// User LED
+#define LED_BUILTIN 17
+#define BUILTIN_LED LED_BUILTIN  // backward compatibility
+
+// Some boards have too low voltage on this pin (board design bug)
+// Use different pin with 3V and connect with 48
+// and change this setup for the chosen pin (for example 38)
+#define PIN_RGB_LED 18
+// BUILTIN_LED can be used in new Arduino API digitalWrite() like in Blink.ino
+#define RGB_BUILTIN    PIN_RGB_LED
+#define RGB_BRIGHTNESS 64
+
+#define TC_SO 48
+
+
+#define PIN_BUTTON_GPIO0   0
+
+
+static const uint8_t TX = 39;
+static const uint8_t RX = 40;
+#define TX1 TX
+#define RX1 RX
+
+static const uint8_t SDA = 33;
+static const uint8_t SCL = 26;
+
+static const uint8_t SS = 34;
+static const uint8_t MOSI = 36;
+static const uint8_t SCK = 31;
+static const uint8_t MISO = 37;
+
+static const uint8_t A0 = 3;
+static const uint8_t A1 = 2;
+static const uint8_t A2 = 1;
+static const uint8_t A3 = 4;
+
+
+static const uint8_t T3 = 3;  // Touch pin IDs map directly
+static const uint8_t T8 = 8;  // to underlying GPIO numbers NOT
+static const uint8_t T9 = 9;  // the analog numbers on board silk
+static const uint8_t T10 = 10;
+static const uint8_t T11 = 11;
+static const uint8_t T12 = 12;
+
+#endif /* Pins_Arduino_h */