Telnet switch docs (home-assistant#3165)

multiholle · balloob · commit e0aef27a8ae9 · 2017-09-21T21:40:15.000-07:00
* Added telnet switch docs.

* Update switch.telnet.markdown

* Added port to Telnet switch docs.

* Optimistic attriute in Telnet switch removed.

* friendly_name -&gt; name

* Updated release.
diff --git a/source/_components/switch.telnet.markdown b/source/_components/switch.telnet.markdown
@@ -0,0 +1,45 @@
+---
+layout: page
+title: "Telnet Switch"
+description: "Instructions how to integrate telnet switches into Home Assistant."
+date: 2017-08-10 19:19
+sidebar: true
+comments: false
+sharing: true
+footer: true
+logo: home-assistant.png
+ha_category: Switch
+ha_release: 0.54
+ha_iot_class: "Local Polling"
+---
+
+
+The `telnet` switch platform allows you to control devices with telnet commands.
+
+To enable this switch, add the following lines to your `configuration.yaml` file:
+
+```yaml
+# Example configuration.yaml entry
+switch:
+  platform: telnet
+  switches:
+    projector:
+      resource: "host_or_ip"
+      port: 4002
+      command_on: "PWR ON"
+      command_off: "PWR OFF"
+      command_state: "PWR?"
+      value_template: '{{ value == "PWR=01" }}'
+```
+
+Configuration variables:
+
+- **switches** (*Required*): The array that contains all switches.
+  - **identifier** (*Required*): Name of the switch as slug. Multiple entries are possible.
+    - **resource** (*Required*): Host or IP of the device.
+    - **port** (*Optional*): Port to connect to. Default is 23 if not defined.
+    - **command_on** (*Required*): Command to turn device on.
+    - **command_off** (*Required*): Command to turn device off.
+    - **command_state** (*Required*): Command to determine the state of the switch. If not defined the switch will assume successful state changes.
+    - **value_template** (*Required*): The template evaluating to `true` will indicate the switch is on.
+    - **name** (*Optional*): The name used to display the switch in the frontend.
