src/modbus.c

/*
 * Copyright © 2001-2011 Stéphane Raimbault <stephane.raimbault@gmail.com>
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Lesser General Public
 * License as published by the Free Software Foundation; either
 * version 2.1 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Lesser General Public License for more details.
 *
 * You should have received a copy of the GNU Lesser General Public
 * License along with this library; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
 *
 *
 * This library implements the Modbus protocol.
 * http://libmodbus.org/
 */

#include <stdio.h>
#include <string.h>
#include <stdlib.h>
#include <errno.h>
#include <limits.h>
#include <time.h>
#ifndef _MSC_VER
#include <unistd.h>
#endif

#include <config.h>

#include "modbus.h"
#include "modbus-private.h"

/* Internal use */
#define MSG_LENGTH_UNDEFINED -1

/* Exported version */
const unsigned int libmodbus_version_major = LIBMODBUS_VERSION_MAJOR;
const unsigned int libmodbus_version_minor = LIBMODBUS_VERSION_MINOR;
const unsigned int libmodbus_version_micro = LIBMODBUS_VERSION_MICRO;

/* Max between RTU and TCP max adu length (so TCP) */
#define MAX_MESSAGE_LENGTH 260

/* 3 steps are used to parse the query */
typedef enum {
    _STEP_FUNCTION,
    _STEP_META,
    _STEP_DATA
} _step_t;

const char *modbus_strerror(int errnum) {
    switch (errnum) {
    case EMBXILFUN:
        return "Illegal function";
    case EMBXILADD:
        return "Illegal data address";
    case EMBXILVAL:
        return "Illegal data value";
    case EMBXSFAIL:
        return "Slave device or server failure";
    case EMBXACK:
        return "Acknowledge";
    case EMBXSBUSY:
        return "Slave device or server is busy";
    case EMBXNACK:
        return "Negative acknowledge";
    case EMBXMEMPAR:
        return "Memory parity error";
    case EMBXGPATH:
        return "Gateway path unavailable";
    case EMBXGTAR:
        return "Target device failed to respond";
    case EMBBADCRC:
        return "Invalid CRC";
    case EMBBADDATA:
        return "Invalid data";
    case EMBBADEXC:
        return "Invalid exception code";
    case EMBMDATA:
        return "Too many data";
    case EMBBADSLAVE:
        return "Response not from requested slave";
    default:
        return strerror(errnum);
    }
}

void _error_print(modbus_t *ctx, const char *context)
{
    if (ctx->debug) {
        fprintf(stderr, "ERROR %s", modbus_strerror(errno));
        if (context != NULL) {
            fprintf(stderr, ": %s\n", context);
        } else {
            fprintf(stderr, "\n");
        }
    }
}

static void _sleep_response_timeout(modbus_t *ctx)
{
#ifdef _WIN32
    /* usleep doesn't exist on Windows */
    Sleep((ctx->response_timeout.tv_sec * 1000) +
          (ctx->response_timeout.tv_usec / 1000));
#else
    /* usleep source code */
    struct timespec request, remaining;
    request.tv_sec = ctx->response_timeout.tv_sec;
    request.tv_nsec = ((long int)ctx->response_timeout.tv_usec % 1000000)
        * 1000;
    while (nanosleep(&request, &remaining) == -1 && errno == EINTR)
        request = remaining;
#endif
}

int modbus_flush(modbus_t *ctx)
{
    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    int rc = ctx->backend->flush(ctx);
    if (rc != -1 && ctx->debug) {
        /* Not all backends are able to return the number of bytes flushed */
        printf("Bytes flushed (%d)\n", rc);
    }
    return rc;
}

/* Computes the length of the expected response */
static unsigned int compute_response_length_from_request(modbus_t *ctx, uint8_t *req)
{
    int length;
    const int offset = ctx->backend->header_length;

    switch (req[offset]) {
    case _FC_READ_COILS:
    case _FC_READ_DISCRETE_INPUTS: {
        /* Header + nb values (code from write_bits) */
        int nb = (req[offset + 3] << 8) | req[offset + 4];
        length = 2 + (nb / 8) + ((nb % 8) ? 1 : 0);
    }
        break;
    case _FC_WRITE_AND_READ_REGISTERS:
    case _FC_READ_HOLDING_REGISTERS:
    case _FC_READ_INPUT_REGISTERS:
        /* Header + 2 * nb values */
        length = 2 + 2 * (req[offset + 3] << 8 | req[offset + 4]);
        break;
    case _FC_READ_EXCEPTION_STATUS:
        length = 3;
        break;
    case _FC_REPORT_SLAVE_ID:
        /* The response is device specific (the header provides the
           length) */
        return MSG_LENGTH_UNDEFINED;
    case _FC_MASK_WRITE_REGISTER:
        length = 7;
        break;
    default:
        length = 5;
    }

    return offset + length + ctx->backend->checksum_length;
}

/* Sends a request/response */
static int send_msg(modbus_t *ctx, uint8_t *msg, int msg_length)
{
    int rc;
    int i;

    msg_length = ctx->backend->send_msg_pre(msg, msg_length);

    if (ctx->debug) {
        for (i = 0; i < msg_length; i++)
            printf("[%.2X]", msg[i]);
        printf("\n");
    }

    /* In recovery mode, the write command will be issued until to be
       successful! Disabled by default. */
    do {
        rc = ctx->backend->send(ctx, msg, msg_length);
        if (rc == -1) {
            _error_print(ctx, NULL);
            if (ctx->error_recovery & MODBUS_ERROR_RECOVERY_LINK) {
                int saved_errno = errno;

                if ((errno == EBADF || errno == ECONNRESET || errno == EPIPE)) {
                    modbus_close(ctx);
                    _sleep_response_timeout(ctx);
                    modbus_connect(ctx);
                } else {
                    _sleep_response_timeout(ctx);
                    modbus_flush(ctx);
                }
                errno = saved_errno;
            }
        }
    } while ((ctx->error_recovery & MODBUS_ERROR_RECOVERY_LINK) &&
             rc == -1);

    if (rc > 0 && rc != msg_length) {
        errno = EMBBADDATA;
        return -1;
    }

    return rc;
}

int modbus_send_raw_request(modbus_t *ctx, uint8_t *raw_req, int raw_req_length)
{
    sft_t sft;
    uint8_t req[MAX_MESSAGE_LENGTH];
    int req_length;

    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    if (raw_req_length < 2) {
        /* The raw request must contain function and slave at least */
        errno = EINVAL;
        return -1;
    }

    sft.slave = raw_req[0];
    sft.function = raw_req[1];
    /* The t_id is left to zero */
    sft.t_id = 0;
    /* This response function only set the header so it's convenient here */
    req_length = ctx->backend->build_response_basis(&sft, req);

    if (raw_req_length > 2) {
        /* Copy data after function code */
        memcpy(req + req_length, raw_req + 2, raw_req_length - 2);
        req_length += raw_req_length - 2;
    }

    return send_msg(ctx, req, req_length);
}

/*
 *  ---------- Request     Indication ----------
 *  | Client | ---------------------->| Server |
 *  ---------- Confirmation  Response ----------
 */

/* Computes the length to read after the function received */
static uint8_t compute_meta_length_after_function(int function,
                                                  msg_type_t msg_type)
{
    int length;

    if (msg_type == MSG_INDICATION) {
        if (function <= _FC_WRITE_SINGLE_REGISTER) {
            length = 4;
        } else if (function == _FC_WRITE_MULTIPLE_COILS ||
                   function == _FC_WRITE_MULTIPLE_REGISTERS) {
            length = 5;
        } else if (function == _FC_MASK_WRITE_REGISTER) {
            length = 6;
        } else if (function == _FC_WRITE_AND_READ_REGISTERS) {
            length = 9;
        } else {
            /* _FC_READ_EXCEPTION_STATUS, _FC_REPORT_SLAVE_ID */
            length = 0;
        }
    } else {
        /* MSG_CONFIRMATION */
        switch (function) {
        case _FC_WRITE_SINGLE_COIL:
        case _FC_WRITE_SINGLE_REGISTER:
        case _FC_WRITE_MULTIPLE_COILS:
        case _FC_WRITE_MULTIPLE_REGISTERS:
            length = 4;
            break;
        case _FC_MASK_WRITE_REGISTER:
            length = 6;
            break;
        default:
            length = 1;
        }
    }

    return length;
}

/* Computes the length to read after the meta information (address, count, etc) */
static int compute_data_length_after_meta(modbus_t *ctx, uint8_t *msg,
                                          msg_type_t msg_type)
{
    int function = msg[ctx->backend->header_length];
    int length;

    if (msg_type == MSG_INDICATION) {
        switch (function) {
        case _FC_WRITE_MULTIPLE_COILS:
        case _FC_WRITE_MULTIPLE_REGISTERS:
            length = msg[ctx->backend->header_length + 5];
            break;
        case _FC_WRITE_AND_READ_REGISTERS:
            length = msg[ctx->backend->header_length + 9];
            break;
        default:
            length = 0;
        }
    } else {
        /* MSG_CONFIRMATION */
        if (function <= _FC_READ_INPUT_REGISTERS ||
            function == _FC_REPORT_SLAVE_ID ||
            function == _FC_WRITE_AND_READ_REGISTERS) {
            length = msg[ctx->backend->header_length + 1];
        } else {
            length = 0;
        }
    }

    length += ctx->backend->checksum_length;

    return length;
}


/* Waits a response from a modbus server or a request from a modbus client.
   This function blocks if there is no replies (3 timeouts).

   The function shall return the number of received characters and the received
   message in an array of uint8_t if successful. Otherwise it shall return -1
   and errno is set to one of the values defined below:
   - ECONNRESET
   - EMBBADDATA
   - EMBUNKEXC
   - ETIMEDOUT
   - read() or recv() error codes
*/

int _modbus_receive_msg(modbus_t *ctx, uint8_t *msg, msg_type_t msg_type)
{
    int rc;
    fd_set rset;
    struct timeval tv;
    struct timeval *p_tv;
    int length_to_read;
    int msg_length = 0;
    _step_t step;

    if (ctx->debug) {
        if (msg_type == MSG_INDICATION) {
            printf("Waiting for a indication...\n");
        } else {
            printf("Waiting for a confirmation...\n");
        }
    }

    /* Add a file descriptor to the set */
    FD_ZERO(&rset);
    FD_SET(ctx->s, &rset);

    /* We need to analyse the message step by step.  At the first step, we want
     * to reach the function code because all packets contain this
     * information. */
    step = _STEP_FUNCTION;
    length_to_read = ctx->backend->header_length + 1;

    if (msg_type == MSG_INDICATION) {
        /* Wait for a message, we don't know when the message will be
         * received */
        p_tv = NULL;
    } else {
        tv.tv_sec = ctx->response_timeout.tv_sec;
        tv.tv_usec = ctx->response_timeout.tv_usec;
        p_tv = &tv;
    }

    while (length_to_read != 0) {
        rc = ctx->backend->select(ctx, &rset, p_tv, length_to_read);
        if (rc == -1) {
            _error_print(ctx, "select");
            if (ctx->error_recovery & MODBUS_ERROR_RECOVERY_LINK) {
                int saved_errno = errno;

                if (errno == ETIMEDOUT) {
                    _sleep_response_timeout(ctx);
                    modbus_flush(ctx);
                } else if (errno == EBADF) {
                    modbus_close(ctx);
                    modbus_connect(ctx);
                }
                errno = saved_errno;
            }
            return -1;
        }

        rc = ctx->backend->recv(ctx, msg + msg_length, length_to_read);
        if (rc == 0) {
            errno = ECONNRESET;
            rc = -1;
        }

        if (rc == -1) {
            _error_print(ctx, "read");
            if ((ctx->error_recovery & MODBUS_ERROR_RECOVERY_LINK) &&
                (errno == ECONNRESET || errno == ECONNREFUSED ||
                 errno == EBADF)) {
                int saved_errno = errno;
                modbus_close(ctx);
                modbus_connect(ctx);
                /* Could be removed by previous calls */
                errno = saved_errno;
            }
            return -1;
        }

        /* Display the hex code of each character received */
        if (ctx->debug) {
            int i;
            for (i=0; i < rc; i++)
                printf("<%.2X>", msg[msg_length + i]);
        }

        /* Sums bytes received */
        msg_length += rc;
        /* Computes remaining bytes */
        length_to_read -= rc;

        if (length_to_read == 0) {
            switch (step) {
            case _STEP_FUNCTION:
                /* Function code position */
                length_to_read = compute_meta_length_after_function(
                    msg[ctx->backend->header_length],
                    msg_type);
                if (length_to_read != 0) {
                    step = _STEP_META;
                    break;
                } /* else switches straight to the next step */
            case _STEP_META:
                length_to_read = compute_data_length_after_meta(
                    ctx, msg, msg_type);
                if ((msg_length + length_to_read) > (int)ctx->backend->max_adu_length) {
                    errno = EMBBADDATA;
                    _error_print(ctx, "too many data");
                    return -1;
                }
                step = _STEP_DATA;
                break;
            default:
                break;
            }
        }

        if (length_to_read > 0 && ctx->byte_timeout.tv_sec != -1) {
            /* If there is no character in the buffer, the allowed timeout
               interval between two consecutive bytes is defined by
               byte_timeout */
            tv.tv_sec = ctx->byte_timeout.tv_sec;
            tv.tv_usec = ctx->byte_timeout.tv_usec;
            p_tv = &tv;
        }
    }

    if (ctx->debug)
        printf("\n");

    return ctx->backend->check_integrity(ctx, msg, msg_length);
}

/* Receive the request from a modbus master */
int modbus_receive(modbus_t *ctx, uint8_t *req)
{
    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    return ctx->backend->receive(ctx, req);
}

/* Receives the confirmation.

   The function shall store the read response in rsp and return the number of
   values (bits or words). Otherwise, its shall return -1 and errno is set.

   The function doesn't check the confirmation is the expected response to the
   initial request.
*/
int modbus_receive_confirmation(modbus_t *ctx, uint8_t *rsp)
{
    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    return _modbus_receive_msg(ctx, rsp, MSG_CONFIRMATION);
}

static int check_confirmation(modbus_t *ctx, uint8_t *req,
                              uint8_t *rsp, int rsp_length)
{
    int rc;
    int rsp_length_computed;
    const int offset = ctx->backend->header_length;
    const int function = rsp[offset];

    if (ctx->backend->pre_check_confirmation) {
        rc = ctx->backend->pre_check_confirmation(ctx, req, rsp, rsp_length);
        if (rc == -1) {
            if (ctx->error_recovery & MODBUS_ERROR_RECOVERY_PROTOCOL) {
                _sleep_response_timeout(ctx);
                modbus_flush(ctx);
            }
            return -1;
        }
    }

    rsp_length_computed = compute_response_length_from_request(ctx, req);

    /* Exception code */
    if (function >= 0x80) {
        if (rsp_length == (offset + 2 + (int)ctx->backend->checksum_length) &&
            req[offset] == (rsp[offset] - 0x80)) {
            /* Valid exception code received */

            int exception_code = rsp[offset + 1];
            if (exception_code < MODBUS_EXCEPTION_MAX) {
                errno = MODBUS_ENOBASE + exception_code;
            } else {
                errno = EMBBADEXC;
            }
            _error_print(ctx, NULL);
            return -1;
        } else {
            errno = EMBBADEXC;
            _error_print(ctx, NULL);
            return -1;
        }
    }

    /* Check length */
    if ((rsp_length == rsp_length_computed ||
         rsp_length_computed == MSG_LENGTH_UNDEFINED) &&
        function < 0x80) {
        int req_nb_value;
        int rsp_nb_value;

        /* Check function code */
        if (function != req[offset]) {
            if (ctx->debug) {
                fprintf(stderr,
                        "Received function not corresponding to the requestd (0x%X != 0x%X)\n",
                        function, req[offset]);
            }
            if (ctx->error_recovery & MODBUS_ERROR_RECOVERY_PROTOCOL) {
                _sleep_response_timeout(ctx);
                modbus_flush(ctx);
            }
            errno = EMBBADDATA;
            return -1;
        }

        /* Check the number of values is corresponding to the request */
        switch (function) {
        case _FC_READ_COILS:
        case _FC_READ_DISCRETE_INPUTS:
            /* Read functions, 8 values in a byte (nb
             * of values in the request and byte count in
             * the response. */
            req_nb_value = (req[offset + 3] << 8) + req[offset + 4];
            req_nb_value = (req_nb_value / 8) + ((req_nb_value % 8) ? 1 : 0);
            rsp_nb_value = rsp[offset + 1];
            break;
        case _FC_WRITE_AND_READ_REGISTERS:
        case _FC_READ_HOLDING_REGISTERS:
        case _FC_READ_INPUT_REGISTERS:
            /* Read functions 1 value = 2 bytes */
            req_nb_value = (req[offset + 3] << 8) + req[offset + 4];
            rsp_nb_value = (rsp[offset + 1] / 2);
            break;
        case _FC_WRITE_MULTIPLE_COILS:
        case _FC_WRITE_MULTIPLE_REGISTERS:
            /* N Write functions */
            req_nb_value = (req[offset + 3] << 8) + req[offset + 4];
            rsp_nb_value = (rsp[offset + 3] << 8) | rsp[offset + 4];
            break;
        case _FC_REPORT_SLAVE_ID:
            /* Report slave ID (bytes received) */
            req_nb_value = rsp_nb_value = rsp[offset + 1];
            break;
        default:
            /* 1 Write functions & others */
            req_nb_value = rsp_nb_value = 1;
        }

        if (req_nb_value == rsp_nb_value) {
            rc = rsp_nb_value;
        } else {
            if (ctx->debug) {
                fprintf(stderr,
                        "Quantity not corresponding to the request (%d != %d)\n",
                        rsp_nb_value, req_nb_value);
            }

            if (ctx->error_recovery & MODBUS_ERROR_RECOVERY_PROTOCOL) {
                _sleep_response_timeout(ctx);
                modbus_flush(ctx);
            }

            errno = EMBBADDATA;
            rc = -1;
        }
    } else {
        if (ctx->debug) {
            fprintf(stderr,
                    "Message length not corresponding to the computed length (%d != %d)\n",
                    rsp_length, rsp_length_computed);
        }
        if (ctx->error_recovery & MODBUS_ERROR_RECOVERY_PROTOCOL) {
            _sleep_response_timeout(ctx);
            modbus_flush(ctx);
        }
        errno = EMBBADDATA;
        rc = -1;
    }

    return rc;
}

static int response_io_status(int address, int nb,
                              uint8_t *tab_io_status,
                              uint8_t *rsp, int offset)
{
    int shift = 0;
    /* Instead of byte (not allowed in Win32) */
    int one_byte = 0;
    int i;

    for (i = address; i < address+nb; i++) {
        one_byte |= tab_io_status[i] << shift;
        if (shift == 7) {
            /* Byte is full */
            rsp[offset++] = one_byte;
            one_byte = shift = 0;
        } else {
            shift++;
        }
    }

    if (shift != 0)
        rsp[offset++] = one_byte;

    return offset;
}

/* Build the exception response */
static int response_exception(modbus_t *ctx, sft_t *sft,
                              int exception_code, uint8_t *rsp)
{
    int rsp_length;

    sft->function = sft->function + 0x80;
    rsp_length = ctx->backend->build_response_basis(sft, rsp);

    /* Positive exception code */
    rsp[rsp_length++] = exception_code;

    return rsp_length;
}

/* Send a response to the received request.
   Analyses the request and constructs a response.

   If an error occurs, this function construct the response
   accordingly.
*/
int modbus_reply(modbus_t *ctx, const uint8_t *req,
                 int req_length, modbus_mapping_t *mb_mapping)
{
    int offset = ctx->backend->header_length;
    int slave = req[offset - 1];
    int function = req[offset];
    uint16_t address = (req[offset + 1] << 8) + req[offset + 2];
    uint8_t rsp[MAX_MESSAGE_LENGTH];
    int rsp_length = 0;
    sft_t sft;

    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    sft.slave = slave;
    sft.function = function;
    sft.t_id = ctx->backend->prepare_response_tid(req, &req_length);

    switch (function) {
    case _FC_READ_COILS: {
        int nb = (req[offset + 3] << 8) + req[offset + 4];

        if (nb < 1 || MODBUS_MAX_READ_BITS < nb) {
            if (ctx->debug) {
                fprintf(stderr,
                        "Illegal nb of values %d in read_bits (max %d)\n",
                        nb, MODBUS_MAX_READ_BITS);
            }
            rsp_length = response_exception(
                ctx, &sft,
                MODBUS_EXCEPTION_ILLEGAL_DATA_VALUE, rsp);
        } else if ((address + nb) > mb_mapping->nb_bits) {
            if (ctx->debug) {
                fprintf(stderr, "Illegal data address %0X in read_bits\n",
                        address + nb);
            }
            rsp_length = response_exception(
                ctx, &sft,
                MODBUS_EXCEPTION_ILLEGAL_DATA_ADDRESS, rsp);
        } else {
            rsp_length = ctx->backend->build_response_basis(&sft, rsp);
            rsp[rsp_length++] = (nb / 8) + ((nb % 8) ? 1 : 0);
            rsp_length = response_io_status(address, nb,
                                            mb_mapping->tab_bits,
                                            rsp, rsp_length);
        }
    }
        break;
    case _FC_READ_DISCRETE_INPUTS: {
        /* Similar to coil status (but too many arguments to use a
         * function) */
        int nb = (req[offset + 3] << 8) + req[offset + 4];

        if (nb < 1 || MODBUS_MAX_READ_BITS < nb) {
            if (ctx->debug) {
                fprintf(stderr,
                        "Illegal nb of values %d in read_input_bits (max %d)\n",
                        nb, MODBUS_MAX_READ_BITS);
            }
            rsp_length = response_exception(
                ctx, &sft,
                MODBUS_EXCEPTION_ILLEGAL_DATA_VALUE, rsp);
        } else if ((address + nb) > mb_mapping->nb_input_bits) {
            if (ctx->debug) {
                fprintf(stderr, "Illegal data address %0X in read_input_bits\n",
                        address + nb);
            }
            rsp_length = response_exception(
                ctx, &sft,
                MODBUS_EXCEPTION_ILLEGAL_DATA_ADDRESS, rsp);
        } else {
            rsp_length = ctx->backend->build_response_basis(&sft, rsp);
            rsp[rsp_length++] = (nb / 8) + ((nb % 8) ? 1 : 0);
            rsp_length = response_io_status(address, nb,
                                            mb_mapping->tab_input_bits,
                                            rsp, rsp_length);
        }
    }
        break;
    case _FC_READ_HOLDING_REGISTERS: {
        int nb = (req[offset + 3] << 8) + req[offset + 4];

        if (nb < 1 || MODBUS_MAX_READ_REGISTERS < nb) {
            if (ctx->debug) {
                fprintf(stderr,
                        "Illegal nb of values %d in read_holding_registers (max %d)\n",
                        nb, MODBUS_MAX_READ_REGISTERS);
            }
            rsp_length = response_exception(
                ctx, &sft,
                MODBUS_EXCEPTION_ILLEGAL_DATA_VALUE, rsp);
        } else if ((address + nb) > mb_mapping->nb_registers) {
            if (ctx->debug) {
                fprintf(stderr, "Illegal data address %0X in read_registers\n",
                        address + nb);
            }
            rsp_length = response_exception(
                ctx, &sft,
                MODBUS_EXCEPTION_ILLEGAL_DATA_ADDRESS, rsp);
        } else {
            int i;

            rsp_length = ctx->backend->build_response_basis(&sft, rsp);
            rsp[rsp_length++] = nb << 1;
            for (i = address; i < address + nb; i++) {
                rsp[rsp_length++] = mb_mapping->tab_registers[i] >> 8;
                rsp[rsp_length++] = mb_mapping->tab_registers[i] & 0xFF;
            }
        }
    }
        break;
    case _FC_READ_INPUT_REGISTERS: {
        /* Similar to holding registers (but too many arguments to use a
         * function) */
        int nb = (req[offset + 3] << 8) + req[offset + 4];

        if (nb < 1 || MODBUS_MAX_READ_REGISTERS < nb) {
            if (ctx->debug) {
                fprintf(stderr,
                        "Illegal number of values %d in read_input_registers (max %d)\n",
                        nb, MODBUS_MAX_READ_REGISTERS);
            }
            rsp_length = response_exception(
                ctx, &sft,
                MODBUS_EXCEPTION_ILLEGAL_DATA_VALUE, rsp);
        } else if ((address + nb) > mb_mapping->nb_input_registers) {
            if (ctx->debug) {
                fprintf(stderr, "Illegal data address %0X in read_input_registers\n",
                        address + nb);
            }
            rsp_length = response_exception(
                ctx, &sft,
                MODBUS_EXCEPTION_ILLEGAL_DATA_ADDRESS, rsp);
        } else {
            int i;

            rsp_length = ctx->backend->build_response_basis(&sft, rsp);
            rsp[rsp_length++] = nb << 1;
            for (i = address; i < address + nb; i++) {
                rsp[rsp_length++] = mb_mapping->tab_input_registers[i] >> 8;
                rsp[rsp_length++] = mb_mapping->tab_input_registers[i] & 0xFF;
            }
        }
    }
        break;
    case _FC_WRITE_SINGLE_COIL:
        if (address >= mb_mapping->nb_bits) {
            if (ctx->debug) {
                fprintf(stderr,
                        "Illegal data address %0X in write_bit\n",
                        address);
            }
            rsp_length = response_exception(
                ctx, &sft,
                MODBUS_EXCEPTION_ILLEGAL_DATA_ADDRESS, rsp);
        } else {
            int data = (req[offset + 3] << 8) + req[offset + 4];

            if (data == 0xFF00 || data == 0x0) {
                mb_mapping->tab_bits[address] = (data) ? ON : OFF;
                memcpy(rsp, req, req_length);
                rsp_length = req_length;
            } else {
                if (ctx->debug) {
                    fprintf(stderr,
                            "Illegal data value %0X in write_bit request at address %0X\n",
                            data, address);
                }
                rsp_length = response_exception(
                    ctx, &sft,
                    MODBUS_EXCEPTION_ILLEGAL_DATA_VALUE, rsp);
            }
        }
        break;
    case _FC_WRITE_SINGLE_REGISTER:
        if (address >= mb_mapping->nb_registers) {
            if (ctx->debug) {
                fprintf(stderr, "Illegal data address %0X in write_register\n",
                        address);
            }
            rsp_length = response_exception(
                ctx, &sft,
                MODBUS_EXCEPTION_ILLEGAL_DATA_ADDRESS, rsp);
        } else {
            int data = (req[offset + 3] << 8) + req[offset + 4];

            mb_mapping->tab_registers[address] = data;
            memcpy(rsp, req, req_length);
            rsp_length = req_length;
        }
        break;
    case _FC_WRITE_MULTIPLE_COILS: {
        int nb = (req[offset + 3] << 8) + req[offset + 4];

        if ((address + nb) > mb_mapping->nb_bits) {
            if (ctx->debug) {
                fprintf(stderr, "Illegal data address %0X in write_bits\n",
                        address + nb);
            }
            rsp_length = response_exception(
                ctx, &sft,
                MODBUS_EXCEPTION_ILLEGAL_DATA_ADDRESS, rsp);
        } else {
            /* 6 = byte count */
            modbus_set_bits_from_bytes(mb_mapping->tab_bits, address, nb, &req[offset + 6]);

            rsp_length = ctx->backend->build_response_basis(&sft, rsp);
            /* 4 to copy the bit address (2) and the quantity of bits */
            memcpy(rsp + rsp_length, req + rsp_length, 4);
            rsp_length += 4;
        }
    }
        break;
    case _FC_WRITE_MULTIPLE_REGISTERS: {
        int nb = (req[offset + 3] << 8) + req[offset + 4];

        if ((address + nb) > mb_mapping->nb_registers) {
            if (ctx->debug) {
                fprintf(stderr, "Illegal data address %0X in write_registers\n",
                        address + nb);
            }
            rsp_length = response_exception(
                ctx, &sft,
                MODBUS_EXCEPTION_ILLEGAL_DATA_ADDRESS, rsp);
        } else {
            int i, j;
            for (i = address, j = 6; i < address + nb; i++, j += 2) {
                /* 6 and 7 = first value */
                mb_mapping->tab_registers[i] =
                    (req[offset + j] << 8) + req[offset + j + 1];
            }

            rsp_length = ctx->backend->build_response_basis(&sft, rsp);
            /* 4 to copy the address (2) and the no. of registers */
            memcpy(rsp + rsp_length, req + rsp_length, 4);
            rsp_length += 4;
        }
    }
        break;
    case _FC_REPORT_SLAVE_ID: {
        int str_len;
        int byte_count_pos;

        rsp_length = ctx->backend->build_response_basis(&sft, rsp);
        /* Skip byte count for now */
        byte_count_pos = rsp_length++;
        rsp[rsp_length++] = _REPORT_SLAVE_ID;
        /* Run indicator status to ON */
        rsp[rsp_length++] = 0xFF;
        /* LMB + length of LIBMODBUS_VERSION_STRING */
        str_len = 3 + strlen(LIBMODBUS_VERSION_STRING);
        memcpy(rsp + rsp_length, "LMB" LIBMODBUS_VERSION_STRING, str_len);
        rsp_length += str_len;
        rsp[byte_count_pos] = rsp_length - byte_count_pos - 1;
    }
        break;
    case _FC_READ_EXCEPTION_STATUS:
        if (ctx->debug) {
            fprintf(stderr, "FIXME Not implemented\n");
        }
        errno = ENOPROTOOPT;
        return -1;
        break;
    case _FC_MASK_WRITE_REGISTER:
        if (address >= mb_mapping->nb_registers) {
            if (ctx->debug) {
                fprintf(stderr, "Illegal data address %0X in write_register\n",
                        address);
            }
            rsp_length = response_exception(
                ctx, &sft,
                MODBUS_EXCEPTION_ILLEGAL_DATA_ADDRESS, rsp);
        } else {
            uint16_t data = mb_mapping->tab_registers[address];
            uint16_t and = (req[offset + 3] << 8) + req[offset + 4];
            uint16_t or = (req[offset + 5] << 8) + req[offset + 6];

            data = (data & and) | (or & (~and));
            mb_mapping->tab_registers[address] = data;
            memcpy(rsp, req, req_length);
            rsp_length = req_length;
        }
        break;
    case _FC_WRITE_AND_READ_REGISTERS: {
        int nb = (req[offset + 3] << 8) + req[offset + 4];
        uint16_t address_write = (req[offset + 5] << 8) + req[offset + 6];
        int nb_write = (req[offset + 7] << 8) + req[offset + 8];
        int nb_write_bytes = req[offset + 9];

        if (nb_write < 1 || MODBUS_MAX_WR_WRITE_REGISTERS < nb_write ||
            nb < 1 || MODBUS_MAX_WR_READ_REGISTERS < nb ||
            nb_write_bytes != nb_write * 2) {
            if (ctx->debug) {
                fprintf(stderr,
                        "Illegal nb of values (W%d, R%d) in write_and_read_registers (max W%d, R%d)\n",
                        nb_write, nb,
                        MODBUS_MAX_WR_WRITE_REGISTERS, MODBUS_MAX_WR_READ_REGISTERS);
            }
            rsp_length = response_exception(
                ctx, &sft,
                MODBUS_EXCEPTION_ILLEGAL_DATA_VALUE, rsp);
        } else if ((address + nb) > mb_mapping->nb_registers ||
                   (address_write + nb_write) > mb_mapping->nb_registers) {
            if (ctx->debug) {
                fprintf(stderr,
                        "Illegal data read address %0X or write address %0X write_and_read_registers\n",
                        address + nb, address_write + nb_write);
            }
            rsp_length = response_exception(ctx, &sft,
                                            MODBUS_EXCEPTION_ILLEGAL_DATA_ADDRESS, rsp);
        } else {
            int i, j;
            rsp_length = ctx->backend->build_response_basis(&sft, rsp);
            rsp[rsp_length++] = nb << 1;

            /* Write first.
               10 and 11 are the offset of the first values to write */
            for (i = address_write, j = 10; i < address_write + nb_write; i++, j += 2) {
                mb_mapping->tab_registers[i] =
                    (req[offset + j] << 8) + req[offset + j + 1];
            }

            /* and read the data for the response */
            for (i = address; i < address + nb; i++) {
                rsp[rsp_length++] = mb_mapping->tab_registers[i] >> 8;
                rsp[rsp_length++] = mb_mapping->tab_registers[i] & 0xFF;
            }
        }
    }
        break;

    default:
        rsp_length = response_exception(ctx, &sft,
                                        MODBUS_EXCEPTION_ILLEGAL_FUNCTION,
                                        rsp);
        break;
    }

    return send_msg(ctx, rsp, rsp_length);
}

int modbus_reply_exception(modbus_t *ctx, const uint8_t *req,
                           unsigned int exception_code)
{
    int offset = ctx->backend->header_length;
    int slave = req[offset - 1];
    int function = req[offset];
    uint8_t rsp[MAX_MESSAGE_LENGTH];
    int rsp_length;
    int dummy_length = 99;
    sft_t sft;

    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    sft.slave = slave;
    sft.function = function + 0x80;;
    sft.t_id = ctx->backend->prepare_response_tid(req, &dummy_length);
    rsp_length = ctx->backend->build_response_basis(&sft, rsp);

    /* Positive exception code */
    if (exception_code < MODBUS_EXCEPTION_MAX) {
        rsp[rsp_length++] = exception_code;
        return send_msg(ctx, rsp, rsp_length);
    } else {
        errno = EINVAL;
        return -1;
    }
}

/* Reads IO status */
static int read_io_status(modbus_t *ctx, int function,
                          int addr, int nb, uint8_t *dest)
{
    int rc;
    int req_length;

    uint8_t req[_MIN_REQ_LENGTH];
    uint8_t rsp[MAX_MESSAGE_LENGTH];

    req_length = ctx->backend->build_request_basis(ctx, function, addr, nb, req);

    rc = send_msg(ctx, req, req_length);
    if (rc > 0) {
        int i, temp, bit;
        int pos = 0;
        int offset;
        int offset_end;

        rc = _modbus_receive_msg(ctx, rsp, MSG_CONFIRMATION);
        if (rc == -1)
            return -1;

        rc = check_confirmation(ctx, req, rsp, rc);
        if (rc == -1)
            return -1;

        offset = ctx->backend->header_length + 2;
        offset_end = offset + rc;
        for (i = offset; i < offset_end; i++) {
            /* Shift reg hi_byte to temp */
            temp = rsp[i];

            for (bit = 0x01; (bit & 0xff) && (pos < nb);) {
                dest[pos++] = (temp & bit) ? TRUE : FALSE;
                bit = bit << 1;
            }

        }
    }

    return rc;
}

/* Reads the boolean status of bits and sets the array elements
   in the destination to TRUE or FALSE (single bits). */
int modbus_read_bits(modbus_t *ctx, int addr, int nb, uint8_t *dest)
{
    int rc;

    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    if (nb > MODBUS_MAX_READ_BITS) {
        if (ctx->debug) {
            fprintf(stderr,
                    "ERROR Too many bits requested (%d > %d)\n",
                    nb, MODBUS_MAX_READ_BITS);
        }
        errno = EMBMDATA;
        return -1;
    }

    rc = read_io_status(ctx, _FC_READ_COILS, addr, nb, dest);

    if (rc == -1)
        return -1;
    else
        return nb;
}


/* Same as modbus_read_bits but reads the remote device input table */
int modbus_read_input_bits(modbus_t *ctx, int addr, int nb, uint8_t *dest)
{
    int rc;

    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    if (nb > MODBUS_MAX_READ_BITS) {
        if (ctx->debug) {
            fprintf(stderr,
                    "ERROR Too many discrete inputs requested (%d > %d)\n",
                    nb, MODBUS_MAX_READ_BITS);
        }
        errno = EMBMDATA;
        return -1;
    }

    rc = read_io_status(ctx, _FC_READ_DISCRETE_INPUTS, addr, nb, dest);

    if (rc == -1)
        return -1;
    else
        return nb;
}

/* Reads the data from a remove device and put that data into an array */
static int read_registers(modbus_t *ctx, int function, int addr, int nb,
                          uint16_t *dest)
{
    int rc;
    int req_length;
    uint8_t req[_MIN_REQ_LENGTH];
    uint8_t rsp[MAX_MESSAGE_LENGTH];

    if (nb > MODBUS_MAX_READ_REGISTERS) {
        if (ctx->debug) {
            fprintf(stderr,
                    "ERROR Too many registers requested (%d > %d)\n",
                    nb, MODBUS_MAX_READ_REGISTERS);
        }
        errno = EMBMDATA;
        return -1;
    }

    req_length = ctx->backend->build_request_basis(ctx, function, addr, nb, req);

    rc = send_msg(ctx, req, req_length);
    if (rc > 0) {
        int offset;
        int i;

        rc = _modbus_receive_msg(ctx, rsp, MSG_CONFIRMATION);
        if (rc == -1)
            return -1;

        rc = check_confirmation(ctx, req, rsp, rc);
        if (rc == -1)
            return -1;

        offset = ctx->backend->header_length;

        for (i = 0; i < rc; i++) {
            /* shift reg hi_byte to temp OR with lo_byte */
            dest[i] = (rsp[offset + 2 + (i << 1)] << 8) |
                rsp[offset + 3 + (i << 1)];
        }
    }

    return rc;
}

/* Reads the holding registers of remote device and put the data into an
   array */
int modbus_read_registers(modbus_t *ctx, int addr, int nb, uint16_t *dest)
{
    int status;

    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    if (nb > MODBUS_MAX_READ_REGISTERS) {
        if (ctx->debug) {
            fprintf(stderr,
                    "ERROR Too many registers requested (%d > %d)\n",
                    nb, MODBUS_MAX_READ_REGISTERS);
        }
        errno = EMBMDATA;
        return -1;
    }

    status = read_registers(ctx, _FC_READ_HOLDING_REGISTERS,
                            addr, nb, dest);
    return status;
}

/* Reads the input registers of remote device and put the data into an array */
int modbus_read_input_registers(modbus_t *ctx, int addr, int nb,
                                uint16_t *dest)
{
    int status;

    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    if (nb > MODBUS_MAX_READ_REGISTERS) {
        fprintf(stderr,
                "ERROR Too many input registers requested (%d > %d)\n",
                nb, MODBUS_MAX_READ_REGISTERS);
        errno = EMBMDATA;
        return -1;
    }

    status = read_registers(ctx, _FC_READ_INPUT_REGISTERS,
                            addr, nb, dest);

    return status;
}

/* Write a value to the specified register of the remote device.
   Used by write_bit and write_register */
static int write_single(modbus_t *ctx, int function, int addr, int value)
{
    int rc;
    int req_length;
    uint8_t req[_MIN_REQ_LENGTH];

    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    req_length = ctx->backend->build_request_basis(ctx, function, addr, value, req);

    rc = send_msg(ctx, req, req_length);
    if (rc > 0) {
        /* Used by write_bit and write_register */
        uint8_t rsp[MAX_MESSAGE_LENGTH];

        rc = _modbus_receive_msg(ctx, rsp, MSG_CONFIRMATION);
        if (rc == -1)
            return -1;

        rc = check_confirmation(ctx, req, rsp, rc);
    }

    return rc;
}

/* Turns ON or OFF a single bit of the remote device */
int modbus_write_bit(modbus_t *ctx, int addr, int status)
{
    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    return write_single(ctx, _FC_WRITE_SINGLE_COIL, addr,
                        status ? 0xFF00 : 0);
}

/* Writes a value in one register of the remote device */
int modbus_write_register(modbus_t *ctx, int addr, int value)
{
    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    return write_single(ctx, _FC_WRITE_SINGLE_REGISTER, addr, value);
}

/* Write the bits of the array in the remote device */
int modbus_write_bits(modbus_t *ctx, int addr, int nb, const uint8_t *src)
{
    int rc;
    int i;
    int byte_count;
    int req_length;
    int bit_check = 0;
    int pos = 0;
    uint8_t req[MAX_MESSAGE_LENGTH];

    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    if (nb > MODBUS_MAX_WRITE_BITS) {
        if (ctx->debug) {
            fprintf(stderr, "ERROR Writing too many bits (%d > %d)\n",
                    nb, MODBUS_MAX_WRITE_BITS);
        }
        errno = EMBMDATA;
        return -1;
    }

    req_length = ctx->backend->build_request_basis(ctx,
                                                   _FC_WRITE_MULTIPLE_COILS,
                                                   addr, nb, req);
    byte_count = (nb / 8) + ((nb % 8) ? 1 : 0);
    req[req_length++] = byte_count;

    for (i = 0; i < byte_count; i++) {
        int bit;

        bit = 0x01;
        req[req_length] = 0;

        while ((bit & 0xFF) && (bit_check++ < nb)) {
            if (src[pos++])
                req[req_length] |= bit;
            else
                req[req_length] &=~ bit;

            bit = bit << 1;
        }
        req_length++;
    }

    rc = send_msg(ctx, req, req_length);
    if (rc > 0) {
        uint8_t rsp[MAX_MESSAGE_LENGTH];

        rc = _modbus_receive_msg(ctx, rsp, MSG_CONFIRMATION);
        if (rc == -1)
            return -1;

        rc = check_confirmation(ctx, req, rsp, rc);
    }


    return rc;
}

/* Write the values from the array to the registers of the remote device */
int modbus_write_registers(modbus_t *ctx, int addr, int nb, const uint16_t *src)
{
    int rc;
    int i;
    int req_length;
    int byte_count;
    uint8_t req[MAX_MESSAGE_LENGTH];

    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    if (nb > MODBUS_MAX_WRITE_REGISTERS) {
        if (ctx->debug) {
            fprintf(stderr,
                    "ERROR Trying to write to too many registers (%d > %d)\n",
                    nb, MODBUS_MAX_WRITE_REGISTERS);
        }
        errno = EMBMDATA;
        return -1;
    }

    req_length = ctx->backend->build_request_basis(ctx,
                                                   _FC_WRITE_MULTIPLE_REGISTERS,
                                                   addr, nb, req);
    byte_count = nb * 2;
    req[req_length++] = byte_count;

    for (i = 0; i < nb; i++) {
        req[req_length++] = src[i] >> 8;
        req[req_length++] = src[i] & 0x00FF;
    }

    rc = send_msg(ctx, req, req_length);
    if (rc > 0) {
        uint8_t rsp[MAX_MESSAGE_LENGTH];

        rc = _modbus_receive_msg(ctx, rsp, MSG_CONFIRMATION);
        if (rc == -1)
            return -1;

        rc = check_confirmation(ctx, req, rsp, rc);
    }

    return rc;
}

int modbus_mask_write_register(modbus_t *ctx, int addr, uint16_t and_mask, uint16_t or_mask)
{
    int rc;
    int req_length;
    uint8_t req[_MIN_REQ_LENGTH];

    req_length = ctx->backend->build_request_basis(ctx, _FC_MASK_WRITE_REGISTER, addr, 0, req);

    /* HACKISH, count is not used */
    req_length -=2;

    req[req_length++] = and_mask >> 8;
    req[req_length++] = and_mask & 0x00ff;
    req[req_length++] = or_mask >> 8;
    req[req_length++] = or_mask & 0x00ff;

    rc = send_msg(ctx, req, req_length);
    if (rc > 0) {
        /* Used by write_bit and write_register */
        uint8_t rsp[MAX_MESSAGE_LENGTH];

        rc = _modbus_receive_msg(ctx, rsp, MSG_CONFIRMATION);
        if (rc == -1)
            return -1;

        rc = check_confirmation(ctx, req, rsp, rc);
    }

    return rc;
}

/* Write multiple registers from src array to remote device and read multiple
   registers from remote device to dest array. */
int modbus_write_and_read_registers(modbus_t *ctx,
                                    int write_addr, int write_nb, const uint16_t *src,
                                    int read_addr, int read_nb, uint16_t *dest)

{
    int rc;
    int req_length;
    int i;
    int byte_count;
    uint8_t req[MAX_MESSAGE_LENGTH];
    uint8_t rsp[MAX_MESSAGE_LENGTH];

    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    if (write_nb > MODBUS_MAX_WR_WRITE_REGISTERS) {
        if (ctx->debug) {
            fprintf(stderr,
                    "ERROR Too many registers to write (%d > %d)\n",
                    write_nb, MODBUS_MAX_WR_WRITE_REGISTERS);
        }
        errno = EMBMDATA;
        return -1;
    }

    if (read_nb > MODBUS_MAX_WR_READ_REGISTERS) {
        if (ctx->debug) {
            fprintf(stderr,
                    "ERROR Too many registers requested (%d > %d)\n",
                    read_nb, MODBUS_MAX_WR_READ_REGISTERS);
        }
        errno = EMBMDATA;
        return -1;
    }
    req_length = ctx->backend->build_request_basis(ctx,
                                                   _FC_WRITE_AND_READ_REGISTERS,
                                                   read_addr, read_nb, req);

    req[req_length++] = write_addr >> 8;
    req[req_length++] = write_addr & 0x00ff;
    req[req_length++] = write_nb >> 8;
    req[req_length++] = write_nb & 0x00ff;
    byte_count = write_nb * 2;
    req[req_length++] = byte_count;

    for (i = 0; i < write_nb; i++) {
        req[req_length++] = src[i] >> 8;
        req[req_length++] = src[i] & 0x00FF;
    }

    rc = send_msg(ctx, req, req_length);
    if (rc > 0) {
        int offset;

        rc = _modbus_receive_msg(ctx, rsp, MSG_CONFIRMATION);
        if (rc == -1)
            return -1;

        rc = check_confirmation(ctx, req, rsp, rc);
        if (rc == -1)
            return -1;

        offset = ctx->backend->header_length;
        for (i = 0; i < rc; i++) {
            /* shift reg hi_byte to temp OR with lo_byte */
            dest[i] = (rsp[offset + 2 + (i << 1)] << 8) |
                rsp[offset + 3 + (i << 1)];
        }
    }

    return rc;
}

/* Send a request to get the slave ID of the device (only available in serial
   communication). */
int modbus_report_slave_id(modbus_t *ctx, uint8_t *dest)
{
    int rc;
    int req_length;
    uint8_t req[_MIN_REQ_LENGTH];

    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    req_length = ctx->backend->build_request_basis(ctx, _FC_REPORT_SLAVE_ID,
                                                   0, 0, req);

    /* HACKISH, addr and count are not used */
    req_length -= 4;

    rc = send_msg(ctx, req, req_length);
    if (rc > 0) {
        int i;
        int offset;
        uint8_t rsp[MAX_MESSAGE_LENGTH];

        rc = _modbus_receive_msg(ctx, rsp, MSG_CONFIRMATION);
        if (rc == -1)
            return -1;

        rc = check_confirmation(ctx, req, rsp, rc);
        if (rc == -1)
            return -1;

        offset = ctx->backend->header_length + 2;

        /* Byte count, slave id, run indicator status,
           additional data */
        for (i=0; i < rc; i++) {
            dest[i] = rsp[offset + i];
        }
    }

    return rc;
}

void _modbus_init_common(modbus_t *ctx)
{
    /* Slave and socket are initialized to -1 */
    ctx->slave = -1;
    ctx->s = -1;

    ctx->debug = FALSE;
    ctx->error_recovery = MODBUS_ERROR_RECOVERY_NONE;

    ctx->response_timeout.tv_sec = 0;
    ctx->response_timeout.tv_usec = _RESPONSE_TIMEOUT;

    ctx->byte_timeout.tv_sec = 0;
    ctx->byte_timeout.tv_usec = _BYTE_TIMEOUT;
}

/* Define the slave number */
int modbus_set_slave(modbus_t *ctx, int slave)
{
    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    return ctx->backend->set_slave(ctx, slave);
}

int modbus_set_error_recovery(modbus_t *ctx,
                              modbus_error_recovery_mode error_recovery)
{
    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    /* The type of modbus_error_recovery_mode is unsigned enum */
    ctx->error_recovery = (uint8_t) error_recovery;
    return 0;
}

int modbus_set_socket(modbus_t *ctx, int s)
{
    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    ctx->s = s;
    return 0;
}

int modbus_get_socket(modbus_t *ctx)
{
    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    return ctx->s;
}

/* Get the timeout interval used to wait for a response */
int modbus_get_response_timeout(modbus_t *ctx, struct timeval *timeout)
{
    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    *timeout = ctx->response_timeout;
    return 0;
}

int modbus_set_response_timeout(modbus_t *ctx, const struct timeval *timeout)
{
    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    ctx->response_timeout = *timeout;
    return 0;
}

/* Get the timeout interval between two consecutive bytes of a message */
int modbus_get_byte_timeout(modbus_t *ctx, struct timeval *timeout)
{
    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    *timeout = ctx->byte_timeout;
    return 0;
}

int modbus_set_byte_timeout(modbus_t *ctx, const struct timeval *timeout)
{
    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    ctx->byte_timeout = *timeout;
    return 0;
}

int modbus_get_header_length(modbus_t *ctx)
{
    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    return ctx->backend->header_length;
}

int modbus_connect(modbus_t *ctx)
{
    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    return ctx->backend->connect(ctx);
}

void modbus_close(modbus_t *ctx)
{
    if (ctx == NULL)
        return;

    ctx->backend->close(ctx);
}

void modbus_free(modbus_t *ctx)
{
    if (ctx == NULL)
        return;

    ctx->backend->free(ctx);
}

int modbus_set_debug(modbus_t *ctx, int flag)
{
    if (ctx == NULL) {
        errno = EINVAL;
        return -1;
    }

    ctx->debug = flag;
    return 0;
}

/* Allocates 4 arrays to store bits, input bits, registers and inputs
   registers. The pointers are stored in modbus_mapping structure.

   The modbus_mapping_new() function shall return the new allocated structure if
   successful. Otherwise it shall return NULL and set errno to ENOMEM. */
modbus_mapping_t* modbus_mapping_new(int nb_bits, int nb_input_bits,
                                     int nb_registers, int nb_input_registers)
{
    modbus_mapping_t *mb_mapping;

    mb_mapping = (modbus_mapping_t *)malloc(sizeof(modbus_mapping_t));
    if (mb_mapping == NULL) {
        return NULL;
    }

    /* 0X */
    mb_mapping->nb_bits = nb_bits;
    if (nb_bits == 0) {
        mb_mapping->tab_bits = NULL;
    } else {
        /* Negative number raises a POSIX error */
        mb_mapping->tab_bits =
            (uint8_t *) malloc(nb_bits * sizeof(uint8_t));
        if (mb_mapping->tab_bits == NULL) {
            free(mb_mapping);
            return NULL;
        }
        memset(mb_mapping->tab_bits, 0, nb_bits * sizeof(uint8_t));
    }

    /* 1X */
    mb_mapping->nb_input_bits = nb_input_bits;
    if (nb_input_bits == 0) {
        mb_mapping->tab_input_bits = NULL;
    } else {
        mb_mapping->tab_input_bits =
            (uint8_t *) malloc(nb_input_bits * sizeof(uint8_t));
        if (mb_mapping->tab_input_bits == NULL) {
            free(mb_mapping->tab_bits);
            free(mb_mapping);
            return NULL;
        }
        memset(mb_mapping->tab_input_bits, 0, nb_input_bits * sizeof(uint8_t));
    }

    /* 4X */
    mb_mapping->nb_registers = nb_registers;
    if (nb_registers == 0) {
        mb_mapping->tab_registers = NULL;
    } else {
        mb_mapping->tab_registers =
            (uint16_t *) malloc(nb_registers * sizeof(uint16_t));
        if (mb_mapping->tab_registers == NULL) {
            free(mb_mapping->tab_input_bits);
            free(mb_mapping->tab_bits);
            free(mb_mapping);
            return NULL;
        }
        memset(mb_mapping->tab_registers, 0, nb_registers * sizeof(uint16_t));
    }

    /* 3X */
    mb_mapping->nb_input_registers = nb_input_registers;
    if (nb_input_registers == 0) {
        mb_mapping->tab_input_registers = NULL;
    } else {
        mb_mapping->tab_input_registers =
            (uint16_t *) malloc(nb_input_registers * sizeof(uint16_t));
        if (mb_mapping->tab_input_registers == NULL) {
            free(mb_mapping->tab_registers);
            free(mb_mapping->tab_input_bits);
            free(mb_mapping->tab_bits);
            free(mb_mapping);
            return NULL;
        }
        memset(mb_mapping->tab_input_registers, 0,
               nb_input_registers * sizeof(uint16_t));
    }

    return mb_mapping;
}

/* Frees the 4 arrays */
void modbus_mapping_free(modbus_mapping_t *mb_mapping)
{
    if (mb_mapping == NULL) {
        return;
    }

    free(mb_mapping->tab_input_registers);
    free(mb_mapping->tab_registers);
    free(mb_mapping->tab_input_bits);
    free(mb_mapping->tab_bits);
    free(mb_mapping);
}

#ifndef HAVE_STRLCPY
/*
 * Function strlcpy was originally developed by
 * Todd C. Miller <Todd.Miller@courtesan.com> to simplify writing secure code.
 * See ftp://ftp.openbsd.org/pub/OpenBSD/src/lib/libc/string/strlcpy.3
 * for more information.
 *
 * Thank you Ulrich Drepper... not!
 *
 * Copy src to string dest of size dest_size.  At most dest_size-1 characters
 * will be copied.  Always NUL terminates (unless dest_size == 0).  Returns
 * strlen(src); if retval >= dest_size, truncation occurred.
 */
size_t strlcpy(char *dest, const char *src, size_t dest_size)
{
    register char *d = dest;
    register const char *s = src;
    register size_t n = dest_size;

    /* Copy as many bytes as will fit */
    if (n != 0 && --n != 0) {
        do {
            if ((*d++ = *s++) == 0)
                break;
        } while (--n != 0);
    }

    /* Not enough room in dest, add NUL and traverse rest of src */
    if (n == 0) {
        if (dest_size != 0)
            *d = '\0'; /* NUL-terminate dest */
        while (*s++)
            ;
    }

    return (s - src - 1); /* count does not include NUL */
}
#endif