##################################################

# Application specific configuration

# Edit this file instead of sdkconfig.esp32cam!

# After editing make sure to explicitly delete

# sdkconfig.esp32cam to apply your changes!

##################################################

#if ENABLE_SOFTAP = disabled, set

#CONFIG_ESP_WIFI_SOFTAP_SUPPORT=n

#to save 28k of flash

CONFIG_ESP_TASK_WDT=n

CONFIG_TASK_WDT=n

CONFIG_TASK_WDT_CHECK_IDLE_TASK=n

CONFIG_COMPILER_OPTIMIZATION_DEFAULT=n

CONFIG_COMPILER_OPTIMIZATION_SIZE=y

###### safe optimizations

CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y

CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT=y

#disable bootloader logging

CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE=y

CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=0

CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT=y

CONFIG_FREERTOS_ASSERT_DISABLE=y

CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=0

#CONFIG_LOG_DEFAULT_LEVEL_NONE=y

#CONFIG_LOG_DEFAULT_LEVEL=0

CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y

CONFIG_LWIP_ESP_LWIP_ASSERT=n

CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED=y

CONFIG_OPTIMIZATION_ASSERTION_LEVEL=0

# CONFIG_LOG_COLORS is not set

#set default loggin to

CONFIG_BOOTLOADER_LOG_LEVEL_ERROR=y

# CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set

# CONFIG_BOOTLOADER_LOG_LEVEL_INFO is not set

# CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG is not set

# CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set

CONFIG_BOOTLOADER_LOG_LEVEL=1

#disable lookup function

CONFIG_ESP_ERR_TO_NAME_LOOKUP=n

# CONFIG_ESP_ERR_TO_NAME_LOOKUP is not set

#no panic message

ESP_SYSTEM_PANIC_SILENT_REBOOT=y

#disable ADC calibration (needed for external sensors)

CONFIG_ADC_CAL_EFUSE_TP_ENABLE=n

CONFIG_ADC_CAL_EFUSE_VREF_ENABLE=n

CONFIG_ADC_CAL_LUT_ENABLE=needed

#disable IPV6

CONFIG_LWIP_IPV6=n

#Newlib format

CONFIG_NEWLIB_NANO_FORMAT=y

# ESP-NN

#

# CONFIG_NN_ANSI_C is not set

CONFIG_NN_OPTIMIZED=y

CONFIG_NN_OPTIMIZATIONS=1

# end of ESP-NN

# ESP HTTP client

#

# CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS is not set

###### end safe optimizations

CONFIG_ESP32_REV_MIN_0=y

CONFIG_ESP32_DPORT_WORKAROUND=y

CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y

CONFIG_ESPTOOLPY_FLASHSIZE="4MB"

CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y

CONFIG_PARTITION_TABLE_CUSTOM=y

CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv"

CONFIG_PARTITION_TABLE_FILENAME="partitions.csv"

CONFIG_PARTITION_TABLE_OFFSET=0x8000

CONFIG_PARTITION_TABLE_MD5=y

CONFIG_ESP32_SPIRAM_SUPPORT=y

CONFIG_SPIRAM_SIZE=-1

CONFIG_SPIRAM_SPEED_40M=y

CONFIG_SPIRAM=y

CONFIG_SPIRAM_BOOT_INIT=y

CONFIG_SPIRAM_USE_MALLOC=y

#CONFIG_SPIRAM_USE_MEMMAP=y => Does not work: "cam_dma_config(306): frame buffer malloc failed"

CONFIG_SPIRAM_MEMTEST=y

CONFIG_SPIRAM_MALLOC_ALWAYSINTERNAL=16384

CONFIG_SPIRAM_MALLOC_RESERVE_INTERNAL=40960

CONFIG_SPIRAM_CACHE_WORKAROUND=y

CONFIG_SPIRAM_IGNORE_NOTFOUND=y

CONFIG_SPIRAM_TRY_ALLOCATE_WIFI_LWIP=y

CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY=y

CONFIG_ESP_INT_WDT_TIMEOUT_MS=300

CONFIG_HTTPD_MAX_REQ_HDR_LEN=1024

CONFIG_HTTPD_PURGE_BUF_LEN=16

CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=16

CONFIG_ESP32_WIFI_CACHE_TX_BUFFER_NUM=16

CONFIG_FATFS_LFN_HEAP=y

CONFIG_FATFS_MAX_LFN=255

CONFIG_FATFS_API_ENCODING_ANSI_OEM=y

CONFIG_FMB_TIMER_PORT_ENABLED=y

CONFIG_MQTT_MSG_ID_INCREMENTAL=y

CONFIG_MQTT_SKIP_PUBLISH_IF_DISCONNECTED=y

CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED=y

CONFIG_MQTT_USE_CORE_0=y

CONFIG_MQTT_USE_CUSTOM_CONFIG=y

#CONFIG_MQTT_OUTBOX_EXPIRED_TIMEOUT_MS=5000

#CONFIG_MQTT_CUSTOM_OUTBOX=y # -> Use custom outbox in components/jomjol_mqtt/mqtt_outbox.h/cpp. If USE_PSRAM is enabled in there, it will save 10 kBytes of internal RAM. How ever it also leads to memory fragmentation, see https://github.com/jomjol/AI-on-the-edge-device/issues/2200

CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=n

CONFIG_CAMERA_CORE0=n

CONFIG_CAMERA_CORE1=y

CONFIG_OV7670_SUPPORT=n

CONFIG_OV7725_SUPPORT=n

CONFIG_NT99141_SUPPORT=n

CONFIG_OV3660_SUPPORT=n

CONFIG_OV2640_SUPPORT=y

CONFIG_OV5640_SUPPORT=y

CONFIG_GC2145_SUPPORT=n

CONFIG_GC032A_SUPPORT=n

CONFIG_GC0308_SUPPORT=n

CONFIG_BF3005_SUPPORT=n

CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=4864

#only necessary for WIFI mesh roaming (include/defines.h -> WLAN_USE_MESH_ROAMING)

#CONFIG_WPA_11KV_SUPPORT=y

#CONFIG_WPA_SCAN_CACHE=n

#CONFIG_WPA_MBO_SUPPORT=n

#CONFIG_WPA_11R_SUPPORT=n // Will be supported with ESP-IDF v5.0

#CONFIG_WPA_DEBUG_PRINT=n

#only necessary for task analysis (include/defines.h -> TASK_ANALYSIS_ON)

#set in [env:esp32cam-dev-task-analysis]

#CONFIG_FREERTOS_USE_TRACE_FACILITY=1

#CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS=y

#CONFIG_FREERTOS_VTASKLIST_INCLUDE_COREID=y

#force disable HIMEM as not used in default config, can be enabled with [env:esp32cam-dev-himem]

#free 256kb of internal memory :

#I (2112) esp_himem: Initialized. Using last 8 32KB address blocks for bank switching on 4352 KB of physical memory.

CONFIG_SPIRAM_BANKSWITCH_ENABLE=n

#CONFIG_SPIRAM_BANKSWITCH_RESERVE is not set

CONFIG_PM_ENABLE=y