### Windows users: To edit this file use Notepad++, VSCode, Atom or SublimeText.

### Do not use Notepad or WordPad.

### MacOSX users: If you use Textedit to edit this file make sure to use

### "plain text format" and "disable smart quotes" in "Textedit > Preferences"

### Heads-up: The "input_raspi" input module of mjpg-streamer is no longer supported.

### Raspicam support is now available on the "input_uvc" module.

### Additional options to supply to MJPG Streamer for the USB camera

#

# See https://faq.octoprint.org/mjpg-streamer-config for available options

#

# Defaults to a resolution of 640x480 px and a framerate of 10 fps

#

#camera_usb_options="-r 640x480 -f 10"

### Additional webcam devices known to cause problems with -f

#

# Apparently there a some devices out there that with the current

# mjpg_streamer release do not support the -f parameter (for specifying

# the capturing framerate) and will just refuse to output an image if it

# is supplied.

#

# The webcam daemon will detect those devices by their USB Vendor and Product

# ID and remove the -f parameter from the options provided to mjpg_streamer.

#

# By default, this is done for the following devices:

# Logitech C170 (046d:082b)

# GEMBIRD (1908:2310)

# Genius F100 (0458:708c)

# Cubeternet GL-UPC822 UVC WebCam (1e4e:0102)

#

# Using the following option it is possible to add additional devices. If

# your webcam happens to show above symptoms, try determining your cam's

# vendor and product id via lsusb, activating the line below by removing # and

# adding it, e.g. for two broken cameras "aabb:ccdd" and "aabb:eeff"

#

# additional_brokenfps_usb_devices=("aabb:ccdd" "aabb:eeff")

#

# If this fixes your problem, please report it back so we can include the device

# out of the box: https://github.com/guysoft/OctoPi/issues

#

#additional_brokenfps_usb_devices=()

### Configuration of camera HTTP output

#

# Usually you should NOT need to change this at all! Only touch if you

# know what you are doing and what the parameters mean.

#

# Below settings are used in the mjpg-streamer call like this:

#

# -o "output_http.so -w $camera_http_webroot $camera_http_options"

#

# Current working directory is the mjpg-streamer base directory.

#

#camera_http_webroot="./www-octopi"

#camera_http_options="-n"

### EXPERIMENTAL

# Support for different streamer types.

#

# Available options:

# mjpeg [default] - stable MJPG-streamer

# hls - experimental FFMPEG HLS streamer

#camera_streamer=mjpeg