@@ -95,7 +95,7 @@ Diagnostic sensors provide additional information about a NUT device.
9595
9696{% important %}
9797Most of this integration's diagnostic sensors are disabled by default
98- to reduce storage overhead for Home Assistant. The diganostic sensors
98+ to reduce storage overhead for Home Assistant. The diagnostic sensors
9999marked with an asterisk \* are enabled by default. To use a disabled
100100sensor, you need to enable them first. See the [ enabling or disabling
101101entities] ( /common-tasks/general/#enabling-or-disabling-entities )
@@ -113,8 +113,7 @@ The following diagnostic sensors may be available:
113113- ** Ambient humidity (%)** \* : * Ambient relative humidity
114114- ** Ambient humidity status** \* : Ambient humidity status relative to the thresholds
115115- ** Ambient temperature (°C)** \* : Ambient temperature
116- - ** Ambient temperature status** \* : Ambient temperature status relative to t
117- he thresholds
116+ - ** Ambient temperature status** \* : Ambient temperature status relative to the thresholds
118117- ** Apparent power (VA)** : Current value of apparent power
119118- ** Battery alarm threshold** : Battery alarm threshold
120119- ** Battery capacity (Ah)** : Battery capacity
@@ -172,7 +171,7 @@ he thresholds
172171- ** Load start timer (secs)** : Time before the load will be started
173172- ** Low battery runtime (secs)** : Remaining battery runtime when UPS switches to low battery (LB)
174173- ** Low battery setpoint (%)** : Remaining battery level when UPS switches to low battery (LB)
175- - ** Low battery voltage (V)** : Minimum battery voltage, that triggers FSD status
174+ - ** Low battery voltage (V)** : Minimum battery voltage that triggers FSD status
176175- ** Low voltage transfer (V)** : Low voltage transfer point
177176- ** Minimum battery runtime to start (secs)** : Minimum battery runtime for UPS restart after power-off
178177- ** Minimum battery to start (%)** : Minimum battery level for UPS restart after power-off
0 commit comments