diff --git a/source/_components/alarm_control_panel.alarmdotcom.markdown b/source/_components/alarm_control_panel.alarmdotcom.markdown
index 2e6542259324..fefdcaecff1c 100644
--- a/source/_components/alarm_control_panel.alarmdotcom.markdown
+++ b/source/_components/alarm_control_panel.alarmdotcom.markdown
@@ -20,8 +20,6 @@ To enable this, add the following lines to your `configuration.yaml`:
 # Example configuration.yaml entry
 alarm_control_panel:
   platform: alarmdotcom
-  name: "HA Alarm"
-  code: PASSCODE
   username: YOUR_USERNAME
   password: YOUR_PASSWORD
 ```
diff --git a/source/_components/alarm_control_panel.manual.markdown b/source/_components/alarm_control_panel.manual.markdown
index d173d3f11a79..26bb28b126d7 100644
--- a/source/_components/alarm_control_panel.manual.markdown
+++ b/source/_components/alarm_control_panel.manual.markdown
@@ -18,16 +18,11 @@ This platform enables you to set manual alarms in Home Assistant.
 # Example configuration.yaml entry
 alarm_control_panel:
   platform: manual
-  name: "HA Alarm"
-  code: PASSCODE
-  pending_time: 60
-  trigger_time: 120
-  disarm_after_trigger: true
 ```
 
 Configuration variables:
 
-- **name** (*Optional*): The name of the alarm. Default is 'HA Alarm'.
+- **name** (*Optional*): The name of the alarm. Default is "HA Alarm".
 - **code** (*Optional*): If defined, specifies a code to enable or disable the alarm in the frontend.
 - **pending_time** (*Optional*): The time in seconds of the pending time before arming the alarm. Default is 60 seconds.
 - **trigger_time** (*Optional*): The time in seconds of the trigger time in which the alarm is firing. Default is 120 seconds.
diff --git a/source/_components/alarm_control_panel.mqtt.markdown b/source/_components/alarm_control_panel.mqtt.markdown
index 95967a021ed5..d782f48fc3c0 100644
--- a/source/_components/alarm_control_panel.mqtt.markdown
+++ b/source/_components/alarm_control_panel.mqtt.markdown
@@ -32,12 +32,6 @@ alarm_control_panel:
   platform: mqtt
   state_topic: "home/alarm"
   command_topic: "home/alarm/set"
-  name: "MQTT Alarm"
-  qos: 0
-  payload_disarm: "DISARM"
-  payload_arm_home: "ARM_HOME"
-  payload_arm_away: "ARM_AWAY"
-  code: "mySecretCode"
 ```
 
 Configuration variables:
diff --git a/source/_components/alarm_control_panel.nx584.markdown b/source/_components/alarm_control_panel.nx584.markdown
index 19981212ae4e..88b808dee955 100644
--- a/source/_components/alarm_control_panel.nx584.markdown
+++ b/source/_components/alarm_control_panel.nx584.markdown
@@ -20,8 +20,6 @@ To enable this, add the following lines to your `configuration.yaml`:
 # Example configuration.yaml entry
 alarm_control_panel:
   platform: nx584
-  host: IP_ADDRESS
-  port: 5007
 ```
 
 Configuration variables:
diff --git a/source/_components/alarm_control_panel.simplisafe.markdown b/source/_components/alarm_control_panel.simplisafe.markdown
index a186d692dd75..af38f6ad3728 100644
--- a/source/_components/alarm_control_panel.simplisafe.markdown
+++ b/source/_components/alarm_control_panel.simplisafe.markdown
@@ -20,8 +20,6 @@ To enable this, add the following lines to your `configuration.yaml`:
 # Example configuration.yaml entry
 alarm_control_panel:
   platform: simplisafe
-  name: "HA Alarm"
-  code: PASSCODE
   username: YOUR_USERNAME
   password: YOUR_PASSWORD
 ```