diff --git a/source/_components/motor.markdown b/source/_components/motor.markdown
new file mode 100644
index 000000000000..a7c2e87179c5
--- /dev/null
+++ b/source/_components/motor.markdown
@@ -0,0 +1,17 @@
+---
+layout: component
+title: "Motors"
+description: "Instructions how to integrate motorized devices into Home Assistant."
+date: 2015-12-01 12:00
+sidebar: true
+comments: false
+sharing: true
+footer: true
+---
+
+
+Home Assistant can give you an interface to control any motorized device that opens and closes. This includes roller shutters, garage doors, gates, blinds, shades, curtains, awnings, etc. 
+
+The following platforms are supported:
+
+- [MQTT](/components/motor.mqtt/)
diff --git a/source/_components/motor.mqtt.markdown b/source/_components/motor.mqtt.markdown
new file mode 100644
index 000000000000..29efcbd5b3fe
--- /dev/null
+++ b/source/_components/motor.mqtt.markdown
@@ -0,0 +1,42 @@
+---
+layout: component
+title: "MQTT Motor"
+description: "Instructions how to integrate MQTT motorized devices into Home Assistant."
+date: 2015-12-01 12:00
+sidebar: true
+comments: false
+sharing: true
+footer: true
+logo: mqtt.png
+ha_category: Motor
+---
+
+
+This platform enables the possibility to control an MQTT motorized device. The device state will be updated only after receiving the a new state from `state_topic`. If these messages are published with RETAIN flag, the MQTT device will receive an instant state update after subscription and will start with correct state. Otherwise, the initial state will be `unknown`.
+There is a state attribute that stores the relative position of the device, where 0% means the device is `closed` and all other intermediate positions means the device is `open`.
+
+```yaml
+# Example configuration.yaml entry
+motor:
+  platform: mqtt
+  name: "Bedroom Rollershutter"
+  state_topic: "home/bedroom/rollershutter"
+  command_topic: "home/bedroom/rollershutter/set"
+  qos: 0
+  payload_open: "OPEN"
+  payload_close: "CLOSE"
+  payload_stop: "STOP"
+```
+
+Configuration variables:
+
+- **command_topic** (*Required*): The MQTT topic to publish commands to control the motor.
+
+- **name** (*Optional*): The name of the motorized device. Default is 'MQTT Motor'.
+- **state_topic** (*Optional*): The MQTT topic subscribed to receive state updates. If not defined, the motor will be stateless, that is, no information about current position or open/closed. If defined, the received payload must be a integer between 0 and 100, that represents the percentage for fully closed and fully open, respectively.
+- **qos** (*Optional*): The maximum QoS level of the state topic. Default is 0. This QoS will also be used to publishing messages.
+- **payload_open** (*Optional*): The payload to open the motorized device. Default is "OPEN".
+- **payload_close** (*Optional*): The payload to close the motorized device. Default is "CLOSE".
+- **payload_stop** (*Optional*): The payload to stop the motorized device. Default is "STOP".
+- **state_format** (*Optional*): The state format to parse. Default is None (no parser).
+