From 8ebf417a91a8c5dc563db0989f7f998c61c22104 Mon Sep 17 00:00:00 2001 From: Alexis Iglauer Date: Fri, 7 Feb 2020 21:50:36 +0100 Subject: [PATCH] Change reference of hass.io to supervisor --- source/_docs/z-wave/installation.markdown | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/source/_docs/z-wave/installation.markdown b/source/_docs/z-wave/installation.markdown index 7927a10b8588..b22fb4aa2811 100644 --- a/source/_docs/z-wave/installation.markdown +++ b/source/_docs/z-wave/installation.markdown @@ -115,7 +115,7 @@ The first run after adding a device is when the `zwave` integration will take ti You do not need to install any software to use Z-Wave. -If the path of `/dev/ttyACM0` doesn't work, look in the *System* section of the *Hass.io* menu. There you'll find a *Hardware* button which will list all the hardware found. +If the path of `/dev/ttyACM0` doesn't work, look in the *System* section of the *Supervisor* menu. There you'll find a *Hardware* button which will list all the hardware found. You can also check what hardware has been found using the [`hassio` command](/hassio/commandline/#hardware):