From 975f7e2134b75bf7d0488326d9520e0474f31796 Mon Sep 17 00:00:00 2001 From: Lukas Date: Fri, 14 Oct 2016 06:58:31 +0200 Subject: [PATCH] Add ignore option to zwave customize configuration PR for home-assistant/home-assistant#3865 --- source/getting-started/z-wave.markdown | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/source/getting-started/z-wave.markdown b/source/getting-started/z-wave.markdown index a02dd34e8507..38140c30e195 100644 --- a/source/getting-started/z-wave.markdown +++ b/source/getting-started/z-wave.markdown @@ -75,7 +75,8 @@ Configuration variables: - **autoheal** (*Optional*): Allows disabling auto Z-Wave heal at midnight. Defaults to True. - **polling_interval** (*Optional*): The time period in milliseconds between polls of a nodes value. Be careful about using polling values below 30000 (30 seconds) as polling can flood the zwave network and cause problems. - **customize** (*Optional*): This attribute contains node-specific override values: - - **polling_intensity** (*Optional*): Enables polling of a value and sets the frequency of polling (0=none, 1=every time through the list, 2-every other time, etc). If not specified then your device will not be polled. + - **polling_intensity** (*Optional*): Enables polling of a value and sets the frequency of polling (0=none, 1=every time through the list, 2=every other time, etc). If not specified then your device will not be polled. + - **ignored** (*Optional*): Ignore this entitiy completely. It won't be shown in the Web Interface and no events are generated for it. To find the path of your Z-Wave USB stick or module, run: