From cec883dbd5612ff001b10025d30bfcc084b56bcd Mon Sep 17 00:00:00 2001 From: Fabian Affolter Date: Mon, 24 Oct 2016 15:38:38 +0200 Subject: [PATCH] Fix date and style --- source/_components/climate.netatmo.markdown | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/source/_components/climate.netatmo.markdown b/source/_components/climate.netatmo.markdown index 900aacb5efaf..956cb502855a 100644 --- a/source/_components/climate.netatmo.markdown +++ b/source/_components/climate.netatmo.markdown @@ -2,7 +2,7 @@ layout: page title: "Netatmo Thermostat" description: "Instructions how to integrate Netatmo thermostat into Home Assistant." -date: 2016-11-10 08:10 +date: 2016-10-11 08:10 sidebar: true comments: false sharing: true @@ -12,27 +12,24 @@ ha_category: Climate ha_release: 0.31 --- -### {% linkable_title Basic Configuration %} The `netatmo` thermostat platform is consuming the information provided by a [Netatmo Smart Thermostat](https://www.netatmo.com/product/energy/thermostat) thermostat. This component allows you to view the current temperature and setpoint. To enable the Netatmo thermostat, you first have to set up [netatmo](/components/netatmo/), this will use discovery to add your thermostat. -### {% linkable_title Basic Configuration %} - If you want to select a specific thermostat, set discovery to False for [netatmo](/components/netatmo/) and add the following lines to your `configuration.yaml`: ```yaml # Example configuration.yaml entry climate: - platform: netatmo + - platform: netatmo ``` Configuration variables: - **relay** (*Optional*): Will display the thermostats of this relay only. - **thermostat** array (*Optional*): Thermostat to use. - - **thermostat_name**: Name of the thermostat to display. + - **thermostat_name**: Name of the thermostat to display. If **relay** and **thermostat** are not provided, all thermostats will be displayed.