diff --git a/source/_components/light.litejet.markdown b/source/_components/light.litejet.markdown
new file mode 100644
index 000000000000..422fe77f0cc9
--- /dev/null
+++ b/source/_components/light.litejet.markdown
@@ -0,0 +1,14 @@
+---
+layout: page
+title: "LiteJet Light"
+description: "Instructions how to setup the LiteJet lights within Home Assistant."
+date: 2016-10-26 13:00
+sidebar: true
+comments: false
+sharing: true
+footer: true
+ha_category: Light
+ha_release: 0.32
+---
+
+To get your LiteJet lights working with Home Assistant, follow the instructions for the general [LiteJet component](/components/litejet/).
diff --git a/source/_components/litejet.markdown b/source/_components/litejet.markdown
new file mode 100644
index 000000000000..bfd94902d09c
--- /dev/null
+++ b/source/_components/litejet.markdown
@@ -0,0 +1,44 @@
+---
+layout: page
+title: "LiteJet"
+description: "Instructions how to setup the LiteJet hub within Home Assistant."
+date: 2015-10-26 09:37
+sidebar: true
+comments: false
+sharing: true
+footer: true
+ha_category: Hub
+featured: true
+---
+
+LiteJet is a centralized lighting system that predates most home automation technology. All lights and wall switches are wired to a central panel. This central panel has a sierial port interface that allows a computer to control the system via LiteJet's third party protocol.
+
+Home Assistant integrates the LiteJet 3rd party protocol and allows you to get the status and control the connected lights.
+
+After connecting the LiteJet's RS232-2 port to your computer, add the following to your `configuration.yaml`:
+
+```yaml
+litejet:
+  url: /dev/serial/by-id/THE-PATH-OF-YOUR-SERIAL-PORT
+```
+
+Your LiteJet MCP should be configured for 19.2 K baud, 8 data bits, 1 stop bit, no parity, and to transmit a 'CR' after each response. These settings can be configured using the [LiteJet programming software](https://www.centralite.com/helpdesk/knowledgebase.php?article=735).
+
+You can also configure the Home Assistant to ignore lights, scenes, and switches via their name. This is highly recommended since LiteJet has a fixed number of each of these and with most systems many will be unused.
+
+```yaml
+litejet:
+  exclude_names:
+  - 'Button #'
+  - 'Scene #'
+  - 'Timed Scene #'
+  - 'Timed Scene#'
+  - 'LV Rel #'
+  - 'Fan #'
+```
+
+Configuration variables:
+
+- **url** (*Required*): The path to the serial port connected to the LiteJet.
+- **exclude_names** (*Optional*): A list of light or switch names that should be ignored.
+- **include_switches** (*Optional*): Cause entities to be created for all the LiteJet switches. Default is false. This can be useful when debugging your lighting as you can press/release switches remotely.
diff --git a/source/_components/scene.litejet.markdown b/source/_components/scene.litejet.markdown
new file mode 100644
index 000000000000..fca7954e1b85
--- /dev/null
+++ b/source/_components/scene.litejet.markdown
@@ -0,0 +1,14 @@
+---
+layout: page
+title: "LiteJet Scenes"
+description: "Instructions how to setup LiteJet scenes within Home Assistant."
+date: 2016-10-26 16:00
+sidebar: true
+comments: false
+sharing: true
+footer: true
+ha_category: Scene
+ha_release: 0.32
+---
+
+To get your LiteJet scenes working with Home Assistant, follow the instructions for the general [LiteJet component](/components/litejet/).
diff --git a/source/_components/switch.litejet.markdown b/source/_components/switch.litejet.markdown
new file mode 100644
index 000000000000..90bd86542dc8
--- /dev/null
+++ b/source/_components/switch.litejet.markdown
@@ -0,0 +1,14 @@
+---
+layout: page
+title: "LiteJet Switch"
+description: "Instructions how to setup the LiteJet switches within Home Assistant."
+date: 2016-10-26 13:00
+sidebar: true
+comments: false
+sharing: true
+footer: true
+ha_category: Switch
+ha_release: 0.32
+---
+
+To get your LiteJet switches working with Home Assistant, follow the instructions for the general [LiteJet component](/components/litejet/).