From db4ad9c5a147bb813b591e251eed5737529689e0 Mon Sep 17 00:00:00 2001
From: MartinHjelmare <marhje52@kth.se>
Date: Mon, 15 Feb 2016 17:39:16 +0100
Subject: [PATCH] Update mysensors main and light pages

---
 source/_components/light.mysensors.markdown | 22 ++++++++++++++++++++-
 source/_components/mysensors.markdown       | 10 +++++-----
 2 files changed, 26 insertions(+), 6 deletions(-)

diff --git a/source/_components/light.mysensors.markdown b/source/_components/light.mysensors.markdown
index ddc07727e485..0f41f4facdb4 100644
--- a/source/_components/light.mysensors.markdown
+++ b/source/_components/light.mysensors.markdown
@@ -2,7 +2,7 @@
 layout: page
 title: "MySensors Light"
 description: "Instructions how to integrate MySensors lights into Home Assistant."
-date: 2016-01-17 15:49
+date: 2016-02-15 17:37
 sidebar: true
 comments: false
 sharing: true
@@ -14,4 +14,24 @@ featured: false
 
 Integrates MySensors lights into Home Assistant. See the [main component] for configuration instructions.
 
+The following actuator types are supported:
+
+##### MySensors version 1.4 and higher
+
+S_TYPE   | V_TYPE
+---------|--------------
+S_LIGHT  | V_LIGHT
+S_DIMMER | V_DIMMER
+
+##### MySensors version 1.5 and higher
+
+S_TYPE      | V_TYPE
+------------|-------------
+S_LIGHT     | V_STATUS
+S_DIMMER    | V_PERCENTAGE
+S_RGB_LIGHT | V_RGB
+
+For more information, visit the [serial api] of MySensors.
+
 [main component]: /components/mysensors/
+[serial api]: https://www.mysensors.org/download/serial_api_15
diff --git a/source/_components/mysensors.markdown b/source/_components/mysensors.markdown
index abb9c28030bc..4ac5851e214e 100644
--- a/source/_components/mysensors.markdown
+++ b/source/_components/mysensors.markdown
@@ -2,7 +2,7 @@
 layout: page
 title: "MySensors"
 description: "Instructions how to integrate MySensors sensors into Home Assistant."
-date: 2015-05-14 21:57
+date: 2016-02-15 17:37
 sidebar: true
 comments: false
 sharing: true
@@ -12,9 +12,9 @@ ha_category: Hub
 featured: true
 ---
 
-The [MySensors](https://www.mysensors.org) project combines Arduino boards with NRF24L01 radio boards to build sensor networks. The component will automatically add all available switches and sensors to Home Assistant.
+The [MySensors](https://www.mysensors.org) project combines Arduino boards with NRF24L01 radio boards to build sensor networks. The component will automatically add all available devices to Home Assistant, after [presentation](#presentation) is done.
 
-### Configuration
+### {% linkable_title Configuration %}
 
 Integrate your Serial MySensors Gateway by adding the following to your `configuration.yaml` file:
 
@@ -40,7 +40,7 @@ Configuration variables:
 - **persistence** (*Optional*): Enable or disable local persistence of sensor information. If this is disabled, then each sensor will need to send presentation messages after Home Assistant starts. Default is true.
 - **persistence_file** (*Optional*): Path to a file to save sensor information. The file extension determines the file type. Currently supported file types are 'pickle' and 'json'.
 - **version** (*Optional*): Specifies the MySensors protocol version to use. Supports 1.4 and 1.5. Default is 1.4.
-- **baud_rate** (*Optional*): Specifies baud rate of the connected gateway.
+- **baud_rate** (*Optional*): Specifies baud rate of the connected gateway. Default is 115200.
 
 If you are using an original Arduino the port will be named `ttyACM*`. The exact number can be determined with the command shown below.
 
@@ -48,7 +48,7 @@ If you are using an original Arduino the port will be named `ttyACM*`. The exact
 $ ls /dev/ttyACM*
 ```
 
-### Presentation
+### {% linkable_title Presentation %}
 
 Present a MySensors sensor or actuator, by following these steps: