diff --git a/source/_integrations/airzone_mqtt.markdown b/source/_integrations/airzone_mqtt.markdown
new file mode 100644
index 000000000000..f4da70f8adeb
--- /dev/null
+++ b/source/_integrations/airzone_mqtt.markdown
@@ -0,0 +1,47 @@
+---
+title: Airzone MQTT
+description: Instructions on how to integrate Airzone MQTT within Home Assistant.
+ha_release: 2025.5
+ha_category:
+  - Sensor
+ha_iot_class: Local Push
+ha_config_flow: true
+ha_domain: airzone_mqtt
+ha_platforms:
+  - sensor
+ha_codeowners:
+  - '@Noltari'
+ha_integration_type: integration
+---
+
+The **Airzone MQTT** {% term integration %} interacts with the MQTT API of [Airzone HVAC zoning systems](https://www.airzone.es/en/).
+
+A typical Airzone device has a *parent zone* (Master Thermostat) per <abbr title="heating, ventilation, and air conditioning">HVAC</abbr> system, which is the only zone where the HVAC mode can be changed. The rest are *child zones* which can only enable or disable the <abbr title="heating, ventilation, and air conditioning">HVAC</abbr> and adjust the desired temperature on that specific zone.
+
+Note that multiple <abbr title="Heating, ventilation, and air conditioning">HVAC</abbr> systems can be connected to the same Airzone WebServer. In this case, there will be a *parent zone* per HVAC system and there may also be *child zones* for each HVAC system.
+
+{% include integrations/config_flow.md %}
+
+{% configuration_basic %}
+MQTT Topic:
+  description: "MQTT Topic ID configured via Airzone Cloud app"
+{% endconfiguration_basic %}
+
+## Sensors
+
+For each Airzone Zone (thermostat), the following *sensors* are created:
+
+| Condition           | Description                        |
+| :------------------ | :--------------------------------- |
+| humidity            | Current zone relative humidity.    |
+| hvac_mode           | Current zone HVAC mode.            |
+| hvac_setpoint       | Current zone HVAC setpoint.        |
+| hvac_setpoint_max   | Current zone HVAC maximum setpoint.    |
+| hvac_setpoint_min   | Current zone HVAC minimum setpoint.    |
+| temperature         | Current zone temperature.          |
+
+## Removing the integration
+
+This integration follows standard integration removal. No extra steps are required.
+
+{% include integrations/remove_device_service.md %}