Update dead links (home-assistant#4637)

louis-lau · fabaff · commit ddf522bb7b01 · 2018-02-11T19:57:40.000+01:00
Links were moved.
diff --git a/source/_docs/ecosystem/hass-configurator.markdown b/source/_docs/ecosystem/hass-configurator.markdown
@@ -109,8 +109,8 @@ Since the configurator script on its own is no service, you will have to take so
 
 1. Fork the process into the background with the command:  
 `nohup sudo ./configurator.py &`
-2. If your system is using systemd (that's usually what you'll find on a Raspberry Pi), there's a [template file](https://github.com/danielperna84/hass-configurator/blob/master/hass-poc-configurator.systemd) you can use and then apply the same process to integrate it as mentioned in the [Home Assistant documentation](https://home-assistant.io/docs/autostart/systemd/). If you use this method you have to set the `BASEPATH` variable according to your environment.
-3. If you have [supervisor](http://supervisord.org/) running on your system, [hass-poc-configurator.supervisor](https://github.com/danielperna84/hass-configurator/blob/master/hass-poc-configurator.supervisor) would be an example configuration you could use to control the configurator.
+2. If your system is using systemd (that's usually what you'll find on a Raspberry Pi), there's a [template file](https://github.com/danielperna84/hass-configurator/blob/master/hass-configurator.systemd) you can use and then apply the same process to integrate it as mentioned in the [Home Assistant documentation](https://home-assistant.io/docs/autostart/systemd/). If you use this method you have to set the `BASEPATH` variable according to your environment.
+3. If you have [supervisor](http://supervisord.org/) running on your system, [hass-poc-configurator.supervisor](https://github.com/danielperna84/hass-configurator/blob/master/hass-configurator.supervisor) would be an example configuration you could use to control the configurator.
 4. A tool called [tmux](https://tmux.github.io/), which should be pre-installed with [HASSbian](https://home-assistant.io/docs/hassbian/).
 5. A tool called [screen](http://ss64.com/bash/screen.html) (alternative to tmux). If it's not already installed on your system, you can do `sudo apt-get install screen` or `sudo yum install screen` to get it. When it's installed, start a screen session by executing `screen`. Then navigate to your Home Assistant directory and start the configurator like described above. Put the screen session into the background by pressing `CTRL+A` and then `CTRL+D`. It is now safe to disconnect from your SSH session.
 To resume the screen session, log in to your machine and execute `screen -r`.
