Fix handling of multixacts predating pg_upgrade

alvherre · alvherre · commit d372cb173e07 · 2016-06-24T18:29:28.000-04:00
After pg_upgrade, it is possible that some tuples' Xmax have multixacts corresponding to the old installation; such multixacts cannot have running members anymore. In many code sites we already know not to read them and clobber them silently, but at least when VACUUM tries to freeze a multixact or determine whether one needs freezing, there's an attempt to resolve it to its member transactions by calling GetMultiXactIdMembers, and if the multixact value is "in the future" with regards to the current valid multixact range, an error like this is raised: ERROR: MultiXactId 123 has not been created yet -- apparent wraparound and vacuuming fails. Per discussion with Andrew Gierth, it is completely bogus to try to resolve multixacts coming from before a pg_upgrade, regardless of where they stand with regards to the current valid multixact range. It's possible to get from under this problem by doing SELECT FOR UPDATE of the problem tuples, but if tables are large, this is slow and tedious, so a more thorough solution is desirable. To fix, we realize that multixacts in xmax created in 9.2 and previous have a specific bit pattern that is never used in 9.3 and later (we already knew this, per comments and infomask tests sprinkled in various places, but we weren't leveraging this knowledge appropriately). Whenever the infomask of the tuple matches that bit pattern, we just ignore the multixact completely as if Xmax wasn't set; or, in the case of tuple freezing, we act as if an unwanted value is set and clobber it without decoding. This guarantees that no errors will be raised, and that the values will be progressively removed until all tables are clean. Most callers of GetMultiXactIdMembers are patched to recognize directly that the value is a removable "empty" multixact and avoid calling GetMultiXactIdMembers altogether. To avoid changing the signature of GetMultiXactIdMembers() in back branches, we keep the "allow_old" boolean flag but rename it to "from_pgupgrade"; if the flag is true, we always return an empty set instead of looking up the multixact. (I suppose we could remove the argument in the master branch, but I chose not to do so in this commit). This was broken all along, but the error-facing message appeared first because of commit 8e9a16a and was partially fixed in a25c2b7. This fix, backpatched all the way back to 9.3, goes approximately in the same direction as a25c2b7 but should cover all cases. Bug analysis by Andrew Gierth and Álvaro Herrera. A number of public reports match this bug: https://www.postgresql.org/message-id/20140330040029.GY4582@tamriel.snowman.net https://www.postgresql.org/message-id/538F3D70.6080902@publicrelay.com https://www.postgresql.org/message-id/556439CF.7070109@pscs.co.uk https://www.postgresql.org/message-id/SG2PR06MB0760098A111C88E31BD4D96FB3540@SG2PR06MB0760.apcprd06.prod.outlook.com https://www.postgresql.org/message-id/20160615203829.5798.4594@wrigleys.postgresql.org
diff --git a/contrib/pgrowlocks/pgrowlocks.c b/contrib/pgrowlocks/pgrowlocks.c
@@ -158,8 +158,7 @@ pgrowlocks(PG_FUNCTION_ARGS)
 
 				values[Atnum_ismulti] = pstrdup("true");
 
-				allow_old = !(infomask & HEAP_LOCK_MASK) &&
-					(infomask & HEAP_XMAX_LOCK_ONLY);
+				allow_old = HEAP_LOCKED_UPGRADED(infomask);
 				nmembers = GetMultiXactIdMembers(xmax, &members, allow_old,
 												 false);
 				if (nmembers == -1)
diff --git a/src/backend/access/heap/heapam.c b/src/backend/access/heap/heapam.c
@@ -3621,6 +3621,7 @@ heap_update(Relation relation, ItemPointer otid, HeapTuple newtup,
 	 * HEAP_XMAX_INVALID bit set; that's fine.)
 	 */
 	if ((oldtup.t_data->t_infomask & HEAP_XMAX_INVALID) ||
+		HEAP_LOCKED_UPGRADED(oldtup.t_data->t_infomask) ||
 		(checked_lockers && !locker_remains))
 		xmax_new_tuple = InvalidTransactionId;
 	else
@@ -5002,8 +5003,7 @@ compute_new_xmax_infomask(TransactionId xmax, uint16 old_infomask,
 		 * pg_upgrade; both MultiXactIdIsRunning and MultiXactIdExpand assume
 		 * that such multis are never passed.
 		 */
-		if (!(old_infomask & HEAP_LOCK_MASK) &&
-			HEAP_XMAX_IS_LOCKED_ONLY(old_infomask))
+		if (HEAP_LOCKED_UPGRADED(old_infomask))
 		{
 			old_infomask &= ~HEAP_XMAX_IS_MULTI;
 			old_infomask |= HEAP_XMAX_INVALID;
@@ -5363,6 +5363,17 @@ heap_lock_updated_tuple_rec(Relation rel, ItemPointer tid, TransactionId xid,
 				int			i;
 				MultiXactMember *members;
 
+				/*
+				 * We don't need a test for pg_upgrade'd tuples: this is only
+				 * applied to tuples after the first in an update chain.  Said
+				 * first tuple in the chain may well be locked-in-9.2-and-
+				 * pg_upgraded, but that one was already locked by our caller,
+				 * not us; and any subsequent ones cannot be because our
+				 * caller must necessarily have obtained a snapshot later than
+				 * the pg_upgrade itself.
+				 */
+				Assert(!HEAP_LOCKED_UPGRADED(mytup.t_data->t_infomask));
+
 				nmembers = GetMultiXactIdMembers(rawxmax, &members, false,
 									 HEAP_XMAX_IS_LOCKED_ONLY(old_infomask));
 				for (i = 0; i < nmembers; i++)
@@ -5921,14 +5932,14 @@ FreezeMultiXactId(MultiXactId multi, uint16 t_infomask,
 	bool		has_lockers;
 	TransactionId update_xid;
 	bool		update_committed;
-	bool		allow_old;
 
 	*flags = 0;
 
 	/* We should only be called in Multis */
 	Assert(t_infomask & HEAP_XMAX_IS_MULTI);
 
-	if (!MultiXactIdIsValid(multi))
+	if (!MultiXactIdIsValid(multi) ||
+		HEAP_LOCKED_UPGRADED(t_infomask))
 	{
 		/* Ensure infomask bits are appropriately set/reset */
 		*flags |= FRM_INVALIDATE_XMAX;
@@ -5941,14 +5952,8 @@ FreezeMultiXactId(MultiXactId multi, uint16 t_infomask,
 		 * was a locker only, it can be removed without any further
 		 * consideration; but if it contained an update, we might need to
 		 * preserve it.
-		 *
-		 * Don't assert MultiXactIdIsRunning if the multi came from a
-		 * pg_upgrade'd share-locked tuple, though, as doing that causes an
-		 * error to be raised unnecessarily.
 		 */
-		Assert((!(t_infomask & HEAP_LOCK_MASK) &&
-				HEAP_XMAX_IS_LOCKED_ONLY(t_infomask)) ||
-			   !MultiXactIdIsRunning(multi,
+		Assert(!MultiXactIdIsRunning(multi,
 									 HEAP_XMAX_IS_LOCKED_ONLY(t_infomask)));
 		if (HEAP_XMAX_IS_LOCKED_ONLY(t_infomask))
 		{
@@ -5990,10 +5995,8 @@ FreezeMultiXactId(MultiXactId multi, uint16 t_infomask,
 	 * anything.
 	 */
 
-	allow_old = !(t_infomask & HEAP_LOCK_MASK) &&
-		HEAP_XMAX_IS_LOCKED_ONLY(t_infomask);
 	nmembers =
-		GetMultiXactIdMembers(multi, &members, allow_old,
+		GetMultiXactIdMembers(multi, &members, false,
 							  HEAP_XMAX_IS_LOCKED_ONLY(t_infomask));
 	if (nmembers <= 0)
 	{
@@ -6535,14 +6538,15 @@ static bool
 DoesMultiXactIdConflict(MultiXactId multi, uint16 infomask,
 						LockTupleMode lockmode)
 {
-	bool		allow_old;
 	int			nmembers;
 	MultiXactMember *members;
 	bool		result = false;
 	LOCKMODE	wanted = tupleLockExtraInfo[lockmode].hwlock;
 
-	allow_old = !(infomask & HEAP_LOCK_MASK) && HEAP_XMAX_IS_LOCKED_ONLY(infomask);
-	nmembers = GetMultiXactIdMembers(multi, &members, allow_old,
+	if (HEAP_LOCKED_UPGRADED(infomask))
+		return false;
+
+	nmembers = GetMultiXactIdMembers(multi, &members, false,
 									 HEAP_XMAX_IS_LOCKED_ONLY(infomask));
 	if (nmembers >= 0)
 	{
@@ -6625,15 +6629,15 @@ Do_MultiXactIdWait(MultiXactId multi, MultiXactStatus status,
 				   Relation rel, ItemPointer ctid, XLTW_Oper oper,
 				   int *remaining)
 {
-	bool		allow_old;
 	bool		result = true;
 	MultiXactMember *members;
 	int			nmembers;
 	int			remain = 0;
 
-	allow_old = !(infomask & HEAP_LOCK_MASK) && HEAP_XMAX_IS_LOCKED_ONLY(infomask);
-	nmembers = GetMultiXactIdMembers(multi, &members, allow_old,
-									 HEAP_XMAX_IS_LOCKED_ONLY(infomask));
+	/* for pre-pg_upgrade tuples, no need to sleep at all */
+	nmembers = HEAP_LOCKED_UPGRADED(infomask) ? -1 :
+		GetMultiXactIdMembers(multi, &members, false,
+							  HEAP_XMAX_IS_LOCKED_ONLY(infomask));
 
 	if (nmembers >= 0)
 	{
@@ -6765,20 +6769,19 @@ heap_tuple_needs_freeze(HeapTupleHeader tuple, TransactionId cutoff_xid,
 			/* no xmax set, ignore */
 			;
 		}
+		else if (HEAP_LOCKED_UPGRADED(tuple->t_infomask))
+			return true;
 		else if (MultiXactIdPrecedes(multi, cutoff_multi))
 			return true;
 		else
 		{
 			MultiXactMember *members;
 			int			nmembers;
 			int			i;
-			bool		allow_old;
 
 			/* need to check whether any member of the mxact is too old */
 
-			allow_old = !(tuple->t_infomask & HEAP_LOCK_MASK) &&
-				HEAP_XMAX_IS_LOCKED_ONLY(tuple->t_infomask);
-			nmembers = GetMultiXactIdMembers(multi, &members, allow_old,
+			nmembers = GetMultiXactIdMembers(multi, &members, false,
 								HEAP_XMAX_IS_LOCKED_ONLY(tuple->t_infomask));
 
 			for (i = 0; i < nmembers; i++)
diff --git a/src/backend/access/transam/multixact.c b/src/backend/access/transam/multixact.c
@@ -1181,19 +1181,25 @@ GetNewMultiXactId(int nmembers, MultiXactOffset *offset)
 
 /*
  * GetMultiXactIdMembers
- *		Returns the set of MultiXactMembers that make up a MultiXactId
- *
- * If the given MultiXactId is older than the value we know to be oldest, we
- * return -1.  The caller is expected to allow that only in permissible cases,
- * i.e. when the infomask lets it presuppose that the tuple had been
- * share-locked before a pg_upgrade; this means that the HEAP_XMAX_LOCK_ONLY
- * needs to be set, but HEAP_XMAX_KEYSHR_LOCK and HEAP_XMAX_EXCL_LOCK are not
- * set.
- *
- * Other border conditions, such as trying to read a value that's larger than
- * the value currently known as the next to assign, raise an error.  Previously
- * these also returned -1, but since this can lead to the wrong visibility
- * results, it is dangerous to do that.
+ *		Return the set of MultiXactMembers that make up a MultiXactId
+ *
+ * Return value is the number of members found, or -1 if there are none,
+ * and *members is set to a newly palloc'ed array of members.  It's the
+ * caller's responsibility to free it when done with it.
+ *
+ * from_pgupgrade must be passed as true if and only if only the multixact
+ * corresponds to a value from a tuple that was locked in a 9.2-or-older
+ * installation and later pg_upgrade'd (that is, the infomask is
+ * HEAP_LOCKED_UPGRADED).  In this case, we know for certain that no members
+ * can still be running, so we return -1 just like for an empty multixact
+ * without any further checking.  It would be wrong to try to resolve such a
+ * multixact: either the multixact is within the current valid multixact
+ * range, in which case the returned result would be bogus, or outside that
+ * range, in which case an error would be raised.
+ *
+ * In all other cases, the passed multixact must be within the known valid
+ * range, that is, greater to or equal than oldestMultiXactId, and less than
+ * nextMXact.  Otherwise, an error is raised.
  *
  * onlyLock must be set to true if caller is certain that the given multi
  * is used only to lock tuples; can be false without loss of correctness,
@@ -1202,7 +1208,7 @@ GetNewMultiXactId(int nmembers, MultiXactOffset *offset)
  */
 int
 GetMultiXactIdMembers(MultiXactId multi, MultiXactMember **members,
-					  bool allow_old, bool onlyLock)
+					  bool from_pgupgrade, bool onlyLock)
 {
 	int			pageno;
 	int			prev_pageno;
@@ -1221,7 +1227,7 @@ GetMultiXactIdMembers(MultiXactId multi, MultiXactMember **members,
 
 	debug_elog3(DEBUG2, "GetMembers: asked for %u", multi);
 
-	if (!MultiXactIdIsValid(multi))
+	if (!MultiXactIdIsValid(multi) || from_pgupgrade)
 		return -1;
 
 	/* See if the MultiXactId is in the local cache */
@@ -1254,18 +1260,11 @@ GetMultiXactIdMembers(MultiXactId multi, MultiXactMember **members,
 	 *
 	 * An ID older than MultiXactState->oldestMultiXactId cannot possibly be
 	 * useful; it has already been removed, or will be removed shortly, by
-	 * truncation.  Returning the wrong values could lead to an incorrect
-	 * visibility result.  However, to support pg_upgrade we need to allow an
-	 * empty set to be returned regardless, if the caller is willing to accept
-	 * it; the caller is expected to check that it's an allowed condition
-	 * (such as ensuring that the infomask bits set on the tuple are
-	 * consistent with the pg_upgrade scenario).  If the caller is expecting
-	 * this to be called only on recently created multis, then we raise an
-	 * error.
+	 * truncation.  If one is passed, an error is raised.
 	 *
-	 * Conversely, an ID >= nextMXact shouldn't ever be seen here; if it is
-	 * seen, it implies undetected ID wraparound has occurred.  This raises a
-	 * hard error.
+	 * Also, an ID >= nextMXact shouldn't ever be seen here; if it is seen, it
+	 * implies undetected ID wraparound has occurred.  This raises a hard
+	 * error.
 	 *
 	 * Shared lock is enough here since we aren't modifying any global state.
 	 * Acquire it just long enough to grab the current counter values.  We may
@@ -1281,7 +1280,7 @@ GetMultiXactIdMembers(MultiXactId multi, MultiXactMember **members,
 
 	if (MultiXactIdPrecedes(multi, oldestMXact))
 	{
-		ereport(allow_old ? DEBUG1 : ERROR,
+		ereport(ERROR,
 				(errcode(ERRCODE_INTERNAL_ERROR),
 		 errmsg("MultiXactId %u does no longer exist -- apparent wraparound",
 				multi)));
diff --git a/src/backend/utils/time/tqual.c b/src/backend/utils/time/tqual.c
@@ -609,15 +609,12 @@ HeapTupleSatisfiesUpdate(HeapTuple htup, CommandId curcid,
 	{
 		TransactionId xmax;
 
+		if (HEAP_LOCKED_UPGRADED(tuple->t_infomask))
+			return HeapTupleMayBeUpdated;
+
 		if (HEAP_XMAX_IS_LOCKED_ONLY(tuple->t_infomask))
 		{
-			/*
-			 * If it's only locked but neither EXCL_LOCK nor KEYSHR_LOCK is
-			 * set, it cannot possibly be running.  Otherwise need to check.
-			 */
-			if ((tuple->t_infomask & (HEAP_XMAX_EXCL_LOCK |
-									  HEAP_XMAX_KEYSHR_LOCK)) &&
-				MultiXactIdIsRunning(HeapTupleHeaderGetRawXmax(tuple), true))
+			if (MultiXactIdIsRunning(HeapTupleHeaderGetRawXmax(tuple), true))
 				return HeapTupleBeingUpdated;
 
 			SetHintBits(tuple, buffer, HEAP_XMAX_INVALID, InvalidTransactionId);
@@ -1258,26 +1255,21 @@ HeapTupleSatisfiesVacuum(HeapTuple htup, TransactionId OldestXmin,
 		 * "Deleting" xact really only locked it, so the tuple is live in any
 		 * case.  However, we should make sure that either XMAX_COMMITTED or
 		 * XMAX_INVALID gets set once the xact is gone, to reduce the costs of
-		 * examining the tuple for future xacts.  Also, marking dead
-		 * MultiXacts as invalid here provides defense against MultiXactId
-		 * wraparound (see also comments in heap_freeze_tuple()).
+		 * examining the tuple for future xacts.
 		 */
 		if (!(tuple->t_infomask & HEAP_XMAX_COMMITTED))
 		{
 			if (tuple->t_infomask & HEAP_XMAX_IS_MULTI)
 			{
 				/*
-				 * If it's only locked but neither EXCL_LOCK nor KEYSHR_LOCK
-				 * are set, it cannot possibly be running; otherwise have to
-				 * check.
+				 * If it's a pre-pg_upgrade tuple, the multixact cannot
+				 * possibly be running; otherwise have to check.
 				 */
-				if ((tuple->t_infomask & (HEAP_XMAX_EXCL_LOCK |
-										  HEAP_XMAX_KEYSHR_LOCK)) &&
+				if (!HEAP_LOCKED_UPGRADED(tuple->t_infomask) &&
 					MultiXactIdIsRunning(HeapTupleHeaderGetRawXmax(tuple),
 										 true))
 					return HEAPTUPLE_LIVE;
 				SetHintBits(tuple, buffer, HEAP_XMAX_INVALID, InvalidTransactionId);
-
 			}
 			else
 			{
diff --git a/src/include/access/htup_details.h b/src/include/access/htup_details.h
@@ -217,6 +217,31 @@ struct HeapTupleHeaderData
 	(((infomask) & HEAP_XMAX_LOCK_ONLY) || \
 	 (((infomask) & (HEAP_XMAX_IS_MULTI | HEAP_LOCK_MASK)) == HEAP_XMAX_EXCL_LOCK))
 
+/*
+ * A tuple that has HEAP_XMAX_IS_MULTI and HEAP_XMAX_LOCK_ONLY but neither of
+ * XMAX_EXCL_LOCK and XMAX_KEYSHR_LOCK must come from a tuple that was
+ * share-locked in 9.2 or earlier and then pg_upgrade'd.
+ *
+ * In 9.2 and prior, HEAP_XMAX_IS_MULTI was only set when there were multiple
+ * FOR SHARE lockers of that tuple.  That set HEAP_XMAX_LOCK_ONLY (with a
+ * different name back then) but neither of HEAP_XMAX_EXCL_LOCK and
+ * HEAP_XMAX_KEYSHR_LOCK.  That combination is no longer possible in 9.3 and
+ * up, so if we see that combination we know for certain that the tuple was
+ * locked in an earlier release; since all such lockers are gone (they cannot
+ * survive through pg_upgrade), such tuples can safely be considered not
+ * locked.
+ *
+ * We must not resolve such multixacts locally, because the result would be
+ * bogus, regardless of where they stand with respect to the current valid
+ * multixact range.
+ */
+#define HEAP_LOCKED_UPGRADED(infomask) \
+( \
+	 ((infomask) & HEAP_XMAX_IS_MULTI) && \
+	 ((infomask) & HEAP_XMAX_LOCK_ONLY) && \
+	 (((infomask) & (HEAP_XMAX_EXCL_LOCK | HEAP_XMAX_KEYSHR_LOCK)) == 0) \
+)
+
 /*
  * Use these to test whether a particular lock is applied to a tuple
  */
