Hi aidex-hackability,
It seems to be a Windows 10 drivers problems. The fact that you see PID F012, means the pysense firmware is running in application mode, so the update was fine.
If you used Zadig tool (http://zadig.akeo.ie/), you might have installed the libusbk for the Pysense in normal mode (USB PID F012), you should try to install (in Zadig) "USB Serial CDC" driver.
As a note, libusbk was required for the USB updater of Pysense (that's USB PID F011). And installing it, it should not affect the normal assignment of F012 as USB-to-Serial converter.
All the best,

# Thank you that worked!
I was able to upgrade and get to the following:

ets Jun 8 2016 00:22:57

rst:0x1 (POWERON_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT)
ets Jun 8 2016 00:22:57

rst:0x10 (RTCWDT_RTC_RESET),boot:0x17 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:1
load:0x3fff9028,len:8
load:0x3fff9030,len:1060
load:0x4009fa00,len:0
ho 12 tail 0 room 4
load:0x4009fa00,len:14084
entry 0x400a05d4
MicroPython v1.8.6-849-86da809 on 2018-01-17; LoPy with ESP32
Type "help()" for more information.

Okay - Next problem solved was changing pymakr.conf to COM## in Atom?
Connecting on COM11...

Why does FTP not work?
Connecting on 192.168.4.1...
Connection error: Error: Login timed out

The f/w update said version 1.14.0.b1 was being installed with pycom_firmware_update_1.1.6.b0.exe
LoPy heartbeat is flashing blue every ~4 seconds - pycom.heartbeat(True) # the blue blinking
Looks like I'm off to the races.

Hi,
In Atom, you need to write a small script to instruct Lopy to which wifi to connect, here is an example: https://docs.pycom.io/chapter/tutorials/all/wlan.html
How to upload scripts in Atom: https://docs.pycom.io/chapter/gettingstarted/installation/pymakr.html
After Lopy is connected to wifi, you can check the IP address using "print(wlan.ifconfig())" and connect to ftp(using a client like FileZilla): https://docs.pycom.io/chapter/toolsandfeatures/FTP.html
As a suggestion, we have a quite active forum, maybe there you can post your issues, and more people could benefit: https://forum.pycom.io. Nevertheless, here will be also answered.