diff --git a/library/wave.po b/library/wave.po
index f0ec943f6a..d72ac11ac2 100644
--- a/library/wave.po
+++ b/library/wave.po
@@ -32,22 +32,28 @@ msgid ""
 "\"WAVE\" (or \"WAV\") file format. Only uncompressed PCM encoded wave files "
 "are supported."
 msgstr ""
+":mod:`wave` 模組為波形音訊檔案格式「WAVE」（或稱「WAV」）提供了便捷的介面。"
+"僅支援未壓縮的 PCM 編碼波形檔。"
 
 #: ../../library/wave.rst:20
 msgid ""
 "Support for ``WAVE_FORMAT_EXTENSIBLE`` headers was added, provided that the "
 "extended format is ``KSDATAFORMAT_SUBTYPE_PCM``."
 msgstr ""
+"增加了標頭  ``WAVE_FORMAT_EXTENSIBLE`` 的支援，要求的擴展格式"
+"為 ``KSDATAFORMAT_SUBTYPE_PCM``。"
 
 #: ../../library/wave.rst:23
 msgid "The :mod:`wave` module defines the following function and exception:"
-msgstr ""
+msgstr ":mod:`wave` 模組定義了以下的函式和例外:"
 
 #: ../../library/wave.rst:28
 msgid ""
 "If *file* is a string, open the file by that name, otherwise treat it as a "
 "file-like object.  *mode* can be:"
 msgstr ""
+"如果 *file* 是一個字串，會打開對應名稱的檔案，否則會以類檔案物件處理。"
+"*mode* 可以是："
 
 #: ../../library/wave.rst:32
 msgid "``'rb'``"
@@ -55,7 +61,7 @@ msgstr "``'rb'``"
 
 #: ../../library/wave.rst:32
 msgid "Read only mode."
-msgstr ""
+msgstr "唯讀模式。"
 
 #: ../../library/wave.rst:35
 msgid "``'wb'``"
@@ -63,11 +69,11 @@ msgstr "``'wb'``"
 
 #: ../../library/wave.rst:35
 msgid "Write only mode."
-msgstr ""
+msgstr "唯寫模式。"
 
 #: ../../library/wave.rst:37
 msgid "Note that it does not allow read/write WAV files."
-msgstr ""
+msgstr "請注意，不支援同時讀寫 WAV 檔案。"
 
 #: ../../library/wave.rst:39
 msgid ""
@@ -76,6 +82,9 @@ msgid ""
 "file-like object is passed as *file*, ``file.mode`` is used as the default "
 "value for *mode*."
 msgstr ""
+"*mode* 設定為 ``'rb'`` 時，會回傳一個 :class:`Wave_read` 物件，*mode* 設定為 "
+"``'wb'`` 時，則回傳一個 :class:`Wave_write` 物件。如果省略 *mode*，並且將類檔案"
+" (file-like) 物件作為 *file* 參數傳遞，則 ``file.mode`` 會是 *mode* 的預設值。"
 
 #: ../../library/wave.rst:44
 msgid ""
@@ -83,6 +92,8 @@ msgid ""
 "its ``close()`` method is called; it is the caller's responsibility to close "
 "the file object."
 msgstr ""
+"如果您傳遞一個類檔案物件，當呼叫其 ``close()`` 方法時，wave 物件不會自動關閉"
+"該物件；關閉檔案物件的責任會在呼叫者上。"
 
 #: ../../library/wave.rst:48
 msgid ""
@@ -90,16 +101,19 @@ msgid ""
 "the :keyword:`!with` block completes, the :meth:`Wave_read.close()` or :meth:"
 "`Wave_write.close()` method is called."
 msgstr ""
+":func:`.open` 函式可以在 :keyword:`with` 陳述式中使用。當 :keyword:`!with` 區"
+"塊完成時，會呼叫 :meth:`Wave_read.close()` 或是 :meth:`Wave_write.close()` 方"
+"法。"
 
 #: ../../library/wave.rst:52 ../../library/wave.rst:176
 msgid "Added support for unseekable files."
-msgstr ""
+msgstr "增加對不可搜尋 (unseekable) 檔案的支援。"
 
 #: ../../library/wave.rst:57
 msgid ""
 "An error raised when something is impossible because it violates the WAV "
 "specification or hits an implementation deficiency."
-msgstr ""
+msgstr "當不符合 WAV 格式或無法操作時會引發錯誤。"
 
 #: ../../library/wave.rst:64
 msgid "Wave_read Objects"
@@ -107,44 +121,46 @@ msgstr "Wave_read 物件"
 
 #: ../../library/wave.rst:68
 msgid "Read a WAV file."
-msgstr ""
+msgstr "讀取一個 WAV 檔案。"
 
 #: ../../library/wave.rst:70
 msgid ""
 "Wave_read objects, as returned by :func:`.open`, have the following methods:"
-msgstr ""
+msgstr "由 :func:`.open` 回傳的 Wave_read 物件具有以下方法："
 
 #: ../../library/wave.rst:75
 msgid ""
 "Close the stream if it was opened by :mod:`wave`, and make the instance "
 "unusable.  This is called automatically on object collection."
-msgstr ""
+msgstr "關閉 :mod:`wave` 開啟的串流並使該實例無法使用。當物件回收時自動呼叫。"
 
 #: ../../library/wave.rst:81
 msgid "Returns number of audio channels (``1`` for mono, ``2`` for stereo)."
-msgstr ""
+msgstr "回傳音訊聲道的數量（單聲道為 ``1``，立體聲為 ``2``）。"
 
 #: ../../library/wave.rst:86
 msgid "Returns sample width in bytes."
-msgstr ""
+msgstr "回傳以位元組表示的取樣寬度 (sample width)。"
 
 #: ../../library/wave.rst:91
 msgid "Returns sampling frequency."
-msgstr ""
+msgstr "回傳取樣率。"
 
 #: ../../library/wave.rst:96
 msgid "Returns number of audio frames."
-msgstr ""
+msgstr "回傳音訊幀數。"
 
 #: ../../library/wave.rst:101
 msgid "Returns compression type (``'NONE'`` is the only supported type)."
-msgstr ""
+msgstr "回傳壓縮類型（僅支援 ``'NONE'`` 類型）。"
 
 #: ../../library/wave.rst:106
 msgid ""
 "Human-readable version of :meth:`getcomptype`. Usually ``'not compressed'`` "
 "parallels ``'NONE'``."
 msgstr ""
+":meth:`getcomptype` 的人類可讀的版本。通常使用 ``'not compressed'`` 代替 "
+"``'NONE'``。"
 
 #: ../../library/wave.rst:112
 msgid ""
@@ -152,43 +168,47 @@ msgid ""
 "framerate, nframes, comptype, compname)``, equivalent to output of the "
 "``get*()`` methods."
 msgstr ""
+"回傳一個 :func:`~collections.namedtuple` ``(nchannels, sampwidth, framerate, "
+"nframes, comptype, compname)``，等同於 ``get*()`` 方法的輸出。"
 
 #: ../../library/wave.rst:119
 msgid ""
 "Reads and returns at most *n* frames of audio, as a :class:`bytes` object."
-msgstr ""
+msgstr "讀取並回傳以 :class:`bytes` 物件表示的最多 *n* 個音訊幀。"
 
 #: ../../library/wave.rst:124
 msgid "Rewind the file pointer to the beginning of the audio stream."
-msgstr ""
+msgstr "重置檔案指標至音訊流的開頭。"
 
 #: ../../library/wave.rst:126
 msgid ""
 "The following two methods are defined for compatibility with the :mod:`aifc` "
 "module, and don't do anything interesting."
-msgstr ""
+msgstr "以下兩個方法是為了與 :mod:`aifc` 模組的保持相容性，並不執行任何操作。"
 
 #: ../../library/wave.rst:132
 msgid "Returns ``None``."
-msgstr ""
+msgstr "回傳 ``None``。"
 
 #: ../../library/wave.rst:137
 msgid "Raise an error."
-msgstr ""
+msgstr "引發錯誤。"
 
 #: ../../library/wave.rst:139
 msgid ""
 "The following two methods define a term \"position\" which is compatible "
 "between them, and is otherwise implementation dependent."
 msgstr ""
+"以下兩個方法所定義的「位置」，在它們之間是相容的，但其他情況下則取決於具體實作"
+"方式。"
 
 #: ../../library/wave.rst:145
 msgid "Set the file pointer to the specified position."
-msgstr ""
+msgstr "將檔案指標設定為指定的位置。"
 
 #: ../../library/wave.rst:150
 msgid "Return current file pointer position."
-msgstr ""
+msgstr "回傳目前的檔案指標位置。"
 
 #: ../../library/wave.rst:156
 msgid "Wave_write Objects"
@@ -196,11 +216,11 @@ msgstr "Wave_write 物件"
 
 #: ../../library/wave.rst:160
 msgid "Write a WAV file."
-msgstr ""
+msgstr "寫入一個 WAV 檔案。"
 
 #: ../../library/wave.rst:162
 msgid "Wave_write objects, as returned by :func:`.open`."
-msgstr ""
+msgstr "Wave_write 物件，由 :func:`.open` 回傳。"
 
 #: ../../library/wave.rst:164
 msgid ""
@@ -215,10 +235,17 @@ msgid ""
 "`writeframes` will calculate the number of frames in the data and set "
 "*nframes* accordingly before writing the frame data."
 msgstr ""
+"對於可搜尋 (seekable) 的輸出串流，``wave`` 標頭將自動更新，以反映實際寫入的幀"
+"數。對於不可搜尋的串流，當寫入第一個幀資料時，*nframes* 的值必"
+"須是準確的。要取得準確的 *nframes* 值，可以通過呼叫 :meth:`setnframes` 或 :"
+"meth:`setparams` 方法，並在呼叫 :meth:`close` 之前設定將寫入的幀數量，然後使"
+"用 :meth:`writeframesraw` 方法寫入幀資料；或者通過呼叫 :meth:`writeframes` 方"
+"法一次性寫入所有的幀資料。在後一種情況下，:meth:`writeframes` 方法將計算資料"
+"中的幀數量，並在寫入幀資料之前相應地設定 *nframes* 的值。"
 
 #: ../../library/wave.rst:179
 msgid "Wave_write objects have the following methods:"
-msgstr ""
+msgstr "Wave_write 物件具有以下方法："
 
 #: ../../library/wave.rst:183
 msgid ""
@@ -227,22 +254,25 @@ msgid ""
 "exception if the output stream is not seekable and *nframes* does not match "
 "the number of frames actually written."
 msgstr ""
+"確保 *nframes* 正確，如果該檔案是由 :mod:`wave` 開啟的，則關閉該檔案。此方法"
+"在物件回收時被呼叫。如果輸出串流不可搜尋且 *nframes* 不符合實際"
+"寫入的幀數，則會引發例外。"
 
 #: ../../library/wave.rst:191
 msgid "Set the number of channels."
-msgstr ""
+msgstr "設定音訊的通道數量。"
 
 #: ../../library/wave.rst:196
 msgid "Set the sample width to *n* bytes."
-msgstr ""
+msgstr "設定取樣寬度為 *n* 個位元組。"
 
 #: ../../library/wave.rst:201
 msgid "Set the frame rate to *n*."
-msgstr ""
+msgstr "設定取樣頻率為 *n*。"
 
 #: ../../library/wave.rst:203
 msgid "A non-integral input to this method is rounded to the nearest integer."
-msgstr ""
+msgstr "此方法的非整數輸入會被將四捨五入到最接近的整數。"
 
 #: ../../library/wave.rst:210
 msgid ""
@@ -250,12 +280,14 @@ msgid ""
 "of frames actually written is different (this update attempt will raise an "
 "error if the output stream is not seekable)."
 msgstr ""
+"設定幀數為 *n*。如果實際寫入的幀數不同，則稍後將進行更改（如果輸出串流不可搜"
+"尋，則此嘗試將引發錯誤）。"
 
 #: ../../library/wave.rst:217
 msgid ""
 "Set the compression type and description. At the moment, only compression "
 "type ``NONE`` is supported, meaning no compression."
-msgstr ""
+msgstr "設定壓縮類型和描述。目前只支援壓縮類型為 ``NONE``，表示無壓縮。"
 
 #: ../../library/wave.rst:223
 msgid ""
@@ -263,20 +295,24 @@ msgid ""
 "compname)``, with values valid for the ``set*()`` methods.  Sets all "
 "parameters."
 msgstr ""
+"這個 *tuple* 應該是 ``(nchannels, sampwidth, framerate, nframes, comptype, "
+"compname)``，值需要是符合 ``set*()`` 方法的參數。設定所有參數。"
 
 #: ../../library/wave.rst:230
 msgid ""
 "Return current position in the file, with the same disclaimer for the :meth:"
 "`Wave_read.tell` and :meth:`Wave_read.setpos` methods."
 msgstr ""
+"回傳檔案中的指標位置，其指標位置含意與 :meth:`Wave_read.tell` 和 :meth:"
+"`Wave_read.setpos` 是一致的。"
 
 #: ../../library/wave.rst:236
 msgid "Write audio frames, without correcting *nframes*."
-msgstr ""
+msgstr "寫入音訊幀，不修正 *nframes*。"
 
 #: ../../library/wave.rst:238 ../../library/wave.rst:249
 msgid "Any :term:`bytes-like object` is now accepted."
-msgstr ""
+msgstr "現在可接受任何 :term:`bytes-like object`。"
 
 #: ../../library/wave.rst:244
 msgid ""
@@ -285,6 +321,8 @@ msgid ""
 "that have been written after *data* has been written does not match the "
 "previously set value for *nframes*."
 msgstr ""
+"寫入音訊幀並確保 *nframes* 正確。如果輸出串流不可搜尋，並且在寫"
+"入 *data* 後已寫入的總幀數與先前設定的 *nframes* 值不符，則會引發錯誤。"
 
 #: ../../library/wave.rst:252
 msgid ""
@@ -292,3 +330,5 @@ msgid ""
 "`writeframes` or :meth:`writeframesraw`, and any attempt to do so will "
 "raise :exc:`wave.Error`."
 msgstr ""
+"注意在呼叫 :meth:`writeframes` 或 :meth:`writeframesraw` 之後設置任何參數都是"
+"無效的，任何嘗試這樣做的操作都會引發 :exc:`wave.Error`。"