Skip to content

Commit 420dbaf

Browse files
osterwoodosterwood
committed
Added board definition for Capable Robot Programmable USB Hub
1 parent 36e2faf commit 420dbaf

File tree

4 files changed

+130
-0
lines changed

4 files changed

+130
-0
lines changed

‎ports/atmel-samd/boards/capablerobot_usbhub/board.c

Lines changed: 39 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,39 @@
1+
/*
2+
* This file is part of the MicroPython project, http://micropython.org/
3+
*
4+
* The MIT License (MIT)
5+
*
6+
* Copyright (c) 2017 Scott Shawcroft for Adafruit Industries
7+
*
8+
* Permission is hereby granted, free of charge, to any person obtaining a copy
9+
* of this software and associated documentation files (the "Software"), to deal
10+
* in the Software without restriction, including without limitation the rights
11+
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
12+
* copies of the Software, and to permit persons to whom the Software is
13+
* furnished to do so, subject to the following conditions:
14+
*
15+
* The above copyright notice and this permission notice shall be included in
16+
* all copies or substantial portions of the Software.
17+
*
18+
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
19+
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
20+
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
21+
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
22+
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
23+
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
24+
* THE SOFTWARE.
25+
*/
26+
27+
#include "boards/board.h"
28+
#include "mpconfigboard.h"
29+
#include "hal/include/hal_gpio.h"
30+
31+
void board_init(void) {
32+
}
33+
34+
bool board_requests_safe_mode(void) {
35+
return false;
36+
}
37+
38+
void reset_board(void) {
39+
}

‎ports/atmel-samd/boards/capablerobot_usbhub/mpconfigboard.h

Lines changed: 37 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,37 @@
1+
#define MICROPY_HW_BOARD_NAME "Capable Robot Programmable USB Hub"
2+
#define MICROPY_HW_MCU_NAME "samd51g19"
3+
4+
#define CIRCUITPY_MCU_FAMILY samd51
5+
6+
7+
#define MICROPY_HW_LED_STATUS (&pin_PA22)
8+
9+
// These are pins not to reset.
10+
// QSPI Data pins
11+
#define MICROPY_PORT_A (PORT_PA08 | PORT_PA09 | PORT_PA10 | PORT_PA11)
12+
// QSPI CS, and QSPI SCK
13+
#define MICROPY_PORT_B (PORT_PB10 | PORT_PB11)
14+
#define MICROPY_PORT_C (0)
15+
#define MICROPY_PORT_D (0)
16+
17+
#define AUTORESET_DELAY_MS 500
18+
19+
// If you change this, then make sure to update the linker scripts as well to
20+
// make sure you don't overwrite code
21+
#define CIRCUITPY_INTERNAL_NVM_SIZE 8192
22+
23+
#define BOARD_FLASH_SIZE (FLASH_SIZE - 0x4000 - CIRCUITPY_INTERNAL_NVM_SIZE)
24+
25+
#define DEFAULT_I2C_BUS_SCL (&pin_PA23)
26+
#define DEFAULT_I2C_BUS_SDA (&pin_PA22)
27+
28+
#define DEFAULT_SPI_BUS_SCK (&pin_PA01)
29+
#define DEFAULT_SPI_BUS_MOSI (&pin_PA00)
30+
#define DEFAULT_SPI_BUS_MISO (&pin_PB23)
31+
32+
#define DEFAULT_UART_BUS_RX (&pin_PA16)
33+
#define DEFAULT_UART_BUS_TX (&pin_PA17)
34+
35+
// USB is always used internally so skip the pin objects for it.
36+
#define IGNORE_PIN_PA24 1
37+
#define IGNORE_PIN_PA25 1

‎ports/atmel-samd/boards/capablerobot_usbhub/mpconfigboard.mk

Lines changed: 18 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,18 @@
1+
LD_FILE = boards/samd51x19-bootloader-external-flash.ld
2+
USB_VID = 0x04D8
3+
USB_PID = 0xEDB3
4+
USB_PRODUCT = "Programmable USB Hub"
5+
USB_MANUFACTURER = "Capable Robot Components"
6+
7+
QSPI_FLASH_FILESYSTEM = 1
8+
EXTERNAL_FLASH_DEVICE_COUNT = 1
9+
EXTERNAL_FLASH_DEVICES = GD25Q16C
10+
LONGINT_IMPL = MPZ
11+
12+
# No I2S on SAMD51G
13+
CIRCUITPY_AUDIOBUSIO = 0
14+
# No touch on SAMD51 yet
15+
CIRCUITPY_TOUCHIO = 0
16+
17+
CHIP_VARIANT = SAMD51G19A
18+
CHIP_FAMILY = samd51

‎ports/atmel-samd/boards/capablerobot_usbhub/pins.c

Lines changed: 36 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,36 @@
1+
#include "shared-bindings/board/__init__.h"
2+
3+
STATIC const mp_rom_map_elem_t board_global_dict_table[] = {
4+
{ MP_OBJ_NEW_QSTR(MP_QSTR_ANMB), MP_ROM_PTR(&pin_PA02) },
5+
{ MP_OBJ_NEW_QSTR(MP_QSTR_ANVLIM), MP_ROM_PTR(&pin_PA04) },
6+
{ MP_OBJ_NEW_QSTR(MP_QSTR_AN5V), MP_ROM_PTR(&pin_PA05) },
7+
8+
{ MP_OBJ_NEW_QSTR(MP_QSTR_MBPWM), MP_ROM_PTR(&pin_PA14) },
9+
{ MP_OBJ_NEW_QSTR(MP_QSTR_MBINT), MP_ROM_PTR(&pin_PA15) },
10+
{ MP_OBJ_NEW_QSTR(MP_QSTR_MBCS), MP_ROM_PTR(&pin_PA18) },
11+
{ MP_OBJ_NEW_QSTR(MP_QSTR_MBRST), MP_ROM_PTR(&pin_PB09) },
12+
13+
{ MP_OBJ_NEW_QSTR(MP_QSTR_LED1), MP_ROM_PTR(&pin_PA19) },
14+
{ MP_OBJ_NEW_QSTR(MP_QSTR_LED2), MP_ROM_PTR(&pin_PA20) },
15+
{ MP_OBJ_NEW_QSTR(MP_QSTR_LED3), MP_ROM_PTR(&pin_PA21) },
16+
17+
{ MP_OBJ_NEW_QSTR(MP_QSTR_RX), MP_ROM_PTR(&pin_PA16) },
18+
{ MP_OBJ_NEW_QSTR(MP_QSTR_TX), MP_ROM_PTR(&pin_PA17) },
19+
20+
{ MP_OBJ_NEW_QSTR(MP_QSTR_USBHEN), MP_ROM_PTR(&pin_PA07) },
21+
{ MP_OBJ_NEW_QSTR(MP_QSTR_USBRST), MP_ROM_PTR(&pin_PB08) },
22+
23+
{ MP_OBJ_NEW_QSTR(MP_QSTR_SDA), MP_ROM_PTR(&pin_PA22) },
24+
{ MP_OBJ_NEW_QSTR(MP_QSTR_SCL), MP_ROM_PTR(&pin_PA23) },
25+
{ MP_OBJ_NEW_QSTR(MP_QSTR_SDA2), MP_ROM_PTR(&pin_PA12) },
26+
{ MP_OBJ_NEW_QSTR(MP_QSTR_SCL2), MP_ROM_PTR(&pin_PA13) },
27+
28+
{ MP_OBJ_NEW_QSTR(MP_QSTR_SCK), MP_ROM_PTR(&pin_PA01) },
29+
{ MP_OBJ_NEW_QSTR(MP_QSTR_MOSI), MP_ROM_PTR(&pin_PA00) },
30+
{ MP_OBJ_NEW_QSTR(MP_QSTR_MISO), MP_ROM_PTR(&pin_PB23) },
31+
32+
{ MP_ROM_QSTR(MP_QSTR_I2C), MP_ROM_PTR(&board_i2c_obj) },
33+
{ MP_ROM_QSTR(MP_QSTR_SPI), MP_ROM_PTR(&board_spi_obj) },
34+
{ MP_ROM_QSTR(MP_QSTR_UART), MP_ROM_PTR(&board_uart_obj) },
35+
};
36+
MP_DEFINE_CONST_DICT(board_module_globals, board_global_dict_table);

0 commit comments

Comments
 (0)