MOre review fixups

JamesH65 · JamesH65 · commit 9d1d7cf94bc6 · 2025-04-29T17:00:49.000+01:00
diff --git a/documentation/asciidoc/computers/compute-module/cmio-display.adoc b/documentation/asciidoc/computers/compute-module/cmio-display.adoc
@@ -14,7 +14,7 @@ To connect a display to DISP1/DSI1:
 . _(CM1, CM3, CM3+, and CM4S only)_: Connect the following GPIO pins with jumper cables:
   * `0` to `CD1_SDA`
   * `1` to `CD1_SCL`
-
+. _(CM5)_ On the Compute Module 5 IO board, add the appropriate jumpers to J6, as indicated on the silkscreen.
 . Reconnect the Compute Module to power.
 . Add the following line to xref:../computers/config_txt.adoc#what-is-config-txt[`/boot/firmware/config.txt`]:
 +

Original file line number	Diff line number	Diff line change
`@@ -14,7 +14,7 @@ To connect a display to DISP1/DSI1:`
`14`	`14`	`. _(CM1, CM3, CM3+, and CM4S only)_: Connect the following GPIO pins with jumper cables:`
`15`	`15`	* `0` to `CD1_SDA`
`16`	`16`	* `1` to `CD1_SCL`
`17`		`-`
	`17`	`+. _(CM5)_ On the Compute Module 5 IO board, add the appropriate jumpers to J6, as indicated on the silkscreen.`
`18`	`18`	`. Reconnect the Compute Module to power.`
`19`	`19`	. Add the following line to xref:../computers/config_txt.adoc#what-is-config-txt[`/boot/firmware/config.txt`]:
`20`	`20`	`+`