Skip to content

Commit 162dffe

Browse files
gautierg-stgautierg-st
committed
Add Nucleo F413ZH board
Tested: - Serial - SPI - USB
1 parent 353487a commit 162dffe

File tree

3 files changed

+506
-0
lines changed

3 files changed

+506
-0
lines changed

‎boards.txt

+14
Original file line numberDiff line numberDiff line change
@@ -36,6 +36,20 @@ Nucleo_144.menu.pnum.NUCLEO_F207ZG.build.variant=STM32F2xx/F207Z(C-E-F-G)T_F217Z
3636
Nucleo_144.menu.pnum.NUCLEO_F207ZG.build.peripheral_pins=-DCUSTOM_PERIPHERAL_PINS
3737
Nucleo_144.menu.pnum.NUCLEO_F207ZG.build.cmsis_lib_gcc=arm_cortexM3l_math
3838

39+
# NUCLEO_F413ZH board
40+
Nucleo_144.menu.pnum.NUCLEO_F413ZH=Nucleo F413ZH
41+
Nucleo_144.menu.pnum.NUCLEO_F413ZH.node=NODE_F413ZH
42+
Nucleo_144.menu.pnum.NUCLEO_F413ZH.upload.maximum_size=1572864
43+
Nucleo_144.menu.pnum.NUCLEO_F413ZH.upload.maximum_data_size=327680
44+
Nucleo_144.menu.pnum.NUCLEO_F413ZH.build.mcu=cortex-m4
45+
Nucleo_144.menu.pnum.NUCLEO_F413ZH.build.fpu=-mfpu=fpv4-sp-d16
46+
Nucleo_144.menu.pnum.NUCLEO_F413ZH.build.float-abi=-mfloat-abi=hard
47+
Nucleo_144.menu.pnum.NUCLEO_F413ZH.build.board=NUCLEO_F413ZH
48+
Nucleo_144.menu.pnum.NUCLEO_F413ZH.build.series=STM32F4xx
49+
Nucleo_144.menu.pnum.NUCLEO_F413ZH.build.product_line=STM32F413xx
50+
Nucleo_144.menu.pnum.NUCLEO_F413ZH.build.variant=STM32F4xx/F413Z(G-H)(J-T)_F423ZH(J-T)
51+
Nucleo_144.menu.pnum.NUCLEO_F413ZH.build.cmsis_lib_gcc=arm_cortexM4lf_math
52+
3953
# NUCLEO_F429ZI board
4054
# Support: USB HID, Serial1 (USART1 on PG9, PG14) and Serial2 (USART2 on PD6, PD5)
4155
Nucleo_144.menu.pnum.NUCLEO_F429ZI=Nucleo F429ZI

‎variants/STM32F4xx/F413Z(G-H)(J-T)_F423ZH(J-T)/variant_NUCLEO_F413ZH.cpp

+229
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,229 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2019-2022, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
#if defined(ARDUINO_NUCLEO_F413ZH)
14+
#include "pins_arduino.h"
15+
16+
// Digital PinName array
17+
// This array allows to wrap Arduino pin number(Dx or x)
18+
// to STM32 PinName (PX_n)
19+
const PinName digitalPin[] = {
20+
PG_9, //D0
21+
PG_14, //D1
22+
PF_15, //D2
23+
PE_13, //D3
24+
PF_14, //D4
25+
PE_11, //D5
26+
PE_9, //D6
27+
PF_13, //D7
28+
PF_12, //D8
29+
PD_15, //D9
30+
PD_14, //D10
31+
PA_7, //D11/A10
32+
PA_6, //D12/A11
33+
PA_5, //D13/A12
34+
PB_9, //D14
35+
PB_8, //D15
36+
PC_6, //D16
37+
PB_15, //D17
38+
PB_13, //D18
39+
PB_12, //D19
40+
PA_15, //D20
41+
PC_7, //D21
42+
PB_5, //D22
43+
PB_3, //D23
44+
PA_4, //D24/A13
45+
PB_4, //D25
46+
PB_6, //D26
47+
PB_2, //D27
48+
PD_13, //D28
49+
PD_12, //D29
50+
PD_11, //D30
51+
PE_2, //D31
52+
PA_0, //D32/A14
53+
PB_0, //D33/A15 - LED_GREEN
54+
PE_0, //D34
55+
PB_11, //D35
56+
PB_10, //D36
57+
PE_15, //D37
58+
PE_14, //D38
59+
PE_12, //D39
60+
PE_10, //D40
61+
PE_7, //D41
62+
PE_8, //D42
63+
PC_8, //D43
64+
PC_9, //D44
65+
PC_10, //D45
66+
PC_11, //D46
67+
PC_12, //D47
68+
PD_2, //D48
69+
PG_2, //D49
70+
PG_3, //D50
71+
PD_7, //D51
72+
PD_6, //D52
73+
PD_5, //D53
74+
PD_4, //D54
75+
PD_3, //D55
76+
PE_2, //D56
77+
PE_4, //D57
78+
PE_5, //D58
79+
PE_6, //D59
80+
PE_3, //D60
81+
PF_8, //D61
82+
PF_7, //D62
83+
PF_9, //D63
84+
PG_1, //D64
85+
PG_0, //D65
86+
PD_1, //D66
87+
PD_0, //D67
88+
PF_0, //D68
89+
PF_1, //D69
90+
PF_2, //D70
91+
PB_7, //D71 - LED_BLUE
92+
PB_14, //D72 - LED_RED
93+
PC_13, //D73 - USER_BTN
94+
PD_9, //D74 - Serial Rx
95+
PD_8, //D75 - Serial Tx
96+
PA_3, //D76/A0
97+
PC_0, //D77/A1
98+
PC_3, //D78/A2
99+
PC_1, //D79/A3
100+
PC_4, //D80/A4
101+
PC_5, //D81/A5
102+
PB_1, //D82/A6
103+
PC_2, //D83/A7
104+
PA_2, //D84/A8
105+
PF_6, //D85
106+
PA_1, //D86/A9
107+
PF_4, //D87
108+
PA_8, //D88
109+
PA_9, //D89
110+
PA_10, //D90
111+
PA_11, //D91
112+
PA_12, //D92
113+
PA_13, //D93
114+
PA_14, //D94
115+
PF_3, //D95/A20
116+
PF_5, //D96/A21
117+
PF_10, //D97/A22
118+
PC_14, //D98
119+
PC_15, //D99
120+
PD_10, //D100
121+
PE_1, //D101
122+
PF_11, //D102
123+
PG_4, //D103
124+
PG_5, //D104
125+
PG_6, //D105
126+
PG_7, //D106
127+
PG_8, //D107
128+
PG_10, //D108
129+
PG_11, //D109
130+
PG_12, //D110
131+
PG_13, //D111
132+
PG_15, //D112
133+
PH_0, //D113
134+
PH_1 //D114
135+
};
136+
137+
// Analog (Ax) pin number array
138+
const uint32_t analogInputPin[] = {
139+
76, //A0
140+
77, //A1
141+
78, //A2
142+
79, //A3
143+
80, //A4
144+
81, //A5
145+
82, //A6
146+
83, //A7
147+
84, //A8
148+
86, //A9
149+
11, //A10
150+
12, //A11
151+
13, //A12
152+
24, //A13
153+
32, //A14
154+
33 //A15
155+
};
156+
157+
// ----------------------------------------------------------------------------
158+
159+
#ifdef __cplusplus
160+
extern "C" {
161+
#endif
162+
163+
/**
164+
* @brief System Clock Configuration
165+
* @param None
166+
* @retval None
167+
*/
168+
WEAK void SystemClock_Config(void)
169+
{
170+
RCC_OscInitTypeDef RCC_OscInitStruct = {};
171+
RCC_ClkInitTypeDef RCC_ClkInitStruct = {};
172+
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct = {};
173+
174+
/** Configure the main internal regulator output voltage
175+
*/
176+
__HAL_RCC_PWR_CLK_ENABLE();
177+
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
178+
179+
/** Initializes the RCC Oscillators according to the specified parameters
180+
* in the RCC_OscInitTypeDef structure.
181+
*/
182+
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
183+
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
184+
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
185+
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
186+
RCC_OscInitStruct.PLL.PLLM = 4;
187+
RCC_OscInitStruct.PLL.PLLN = 100;
188+
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
189+
RCC_OscInitStruct.PLL.PLLQ = 8;
190+
RCC_OscInitStruct.PLL.PLLR = 2;
191+
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
192+
Error_Handler();
193+
}
194+
195+
/** Initializes the CPU, AHB and APB buses clocks
196+
*/
197+
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
198+
| RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
199+
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
200+
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
201+
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
202+
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
203+
204+
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3) != HAL_OK) {
205+
Error_Handler();
206+
}
207+
208+
/** Initializes the peripherals clock
209+
*/
210+
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_PLLI2S | RCC_PERIPHCLK_CLK48
211+
| RCC_PERIPHCLK_SDIO | RCC_PERIPHCLK_I2S_APB2;
212+
PeriphClkInitStruct.PLLI2S.PLLI2SN = 72;
213+
PeriphClkInitStruct.PLLI2S.PLLI2SM = 4;
214+
PeriphClkInitStruct.PLLI2S.PLLI2SR = 2;
215+
PeriphClkInitStruct.PLLI2S.PLLI2SQ = 3;
216+
PeriphClkInitStruct.Clk48ClockSelection = RCC_CLK48CLKSOURCE_PLLI2SQ;
217+
PeriphClkInitStruct.SdioClockSelection = RCC_SDIOCLKSOURCE_CLK48;
218+
PeriphClkInitStruct.I2sApb2ClockSelection = RCC_I2SAPB2CLKSOURCE_PLLI2S;
219+
PeriphClkInitStruct.PLLI2SSelection = RCC_PLLI2SCLKSOURCE_PLLSRC;
220+
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK) {
221+
Error_Handler();
222+
}
223+
}
224+
225+
#ifdef __cplusplus
226+
}
227+
#endif
228+
229+
#endif /* ARDUINO_NUCLEO_F413ZH */

0 commit comments

Comments
 (0)