Enable SensorXEL revE.

Kei · Kei · commit 567fb339f507 · 2020-05-29T15:54:21.000+09:00
diff --git a/boards.txt b/boards.txt
@@ -52,20 +52,20 @@ XELNetwork.menu.pnum.PowerXEL.bootloader.tool = stm32flash
 XELNetwork.menu.pnum.PowerXEL.bootloader.file = powerXel_boot.bin
 
 # SensorXEL board revE
-#XELNetwork.menu.pnum.SensorXEL_revE=SensorXEL_revE. (32kb RAM)
-#XELNetwork.menu.pnum.SensorXEL_revE.upload.maximum_data_size=32768
-#XELNetwork.menu.pnum.SensorXEL_revE.upload.maximum_size=52736
-#XELNetwork.menu.pnum.SensorXEL_revE.upload.flash_address=0x08003000
-#XELNetwork.menu.pnum.SensorXEL_revE.build.mcu=cortex-m3
-#XELNetwork.menu.pnum.SensorXEL_revE.build.board=SensorXEL_revE
-#XELNetwork.menu.pnum.SensorXEL_revE.build.series=STM32L1xx
-#XELNetwork.menu.pnum.SensorXEL_revE.build.product_line=STM32L151xBA
-#XELNetwork.menu.pnum.SensorXEL_revE.build.variant=XELNetwork_SensorXEL_revE
-#XELNetwork.menu.pnum.SensorXEL_revE.build.flash_offset=0x3200
-#XELNetwork.menu.pnum.SensorXEL_revE.build.cmsis_lib_gcc=arm_cortexM3l_math
-#XELNetwork.menu.pnum.SensorXEL_revE.build.extra_flags=-D{build.product_line} {build.xSerial} -DVECT_TAB_OFFSET={build.flash_offset} -DSERIAL_TX_BUFFER_SIZE=1024 -DSERIAL_RX_BUFFER_SIZE=1024
-#XELNetwork.menu.pnum.SensorXEL_revE.bootloader.tool = stm32flash
-#XELNetwork.menu.pnum.SensorXEL_revE.bootloader.file = sensorXel_boot_revE.bin
+XELNetwork.menu.pnum.SensorXEL_revE=SensorXEL_revE. (32kb RAM)
+XELNetwork.menu.pnum.SensorXEL_revE.upload.maximum_data_size=32768
+XELNetwork.menu.pnum.SensorXEL_revE.upload.maximum_size=52736
+XELNetwork.menu.pnum.SensorXEL_revE.upload.flash_address=0x08003000
+XELNetwork.menu.pnum.SensorXEL_revE.build.mcu=cortex-m3
+XELNetwork.menu.pnum.SensorXEL_revE.build.board=SensorXEL_revE
+XELNetwork.menu.pnum.SensorXEL_revE.build.series=STM32L1xx
+XELNetwork.menu.pnum.SensorXEL_revE.build.product_line=STM32L151xBA
+XELNetwork.menu.pnum.SensorXEL_revE.build.variant=XELNetwork_SensorXEL_revE
+XELNetwork.menu.pnum.SensorXEL_revE.build.flash_offset=0x3200
+XELNetwork.menu.pnum.SensorXEL_revE.build.cmsis_lib_gcc=arm_cortexM3l_math
+XELNetwork.menu.pnum.SensorXEL_revE.build.extra_flags=-D{build.product_line} {build.xSerial} -DVECT_TAB_OFFSET={build.flash_offset} -DSERIAL_TX_BUFFER_SIZE=1024 -DSERIAL_RX_BUFFER_SIZE=1024
+XELNetwork.menu.pnum.SensorXEL_revE.bootloader.tool = stm32flash
+XELNetwork.menu.pnum.SensorXEL_revE.bootloader.file = sensorXel_boot_revE.bin
 
 # CommXEL board (lastest)
 XELNetwork.menu.pnum.CommXEL=CommXEL. (320kb RAM)
diff --git a/libraries/SrcWrapper/src/stm32/uart.c b/libraries/SrcWrapper/src/stm32/uart.c
@@ -808,10 +808,15 @@ uint8_t uart_index(UART_HandleTypeDef *huart)
   */
 void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
 {
+#if defined(ARDUINO_SensorXEL) || defined(ARDUINO_SensorXEL_revE)\
+ || defined(ARDUINO_PowerXEL) //|| defined(ARDUINO_CommXEL)  
+  (void)huart;
+#else
   serial_t *obj = get_serial_obj(huart);
   if (obj && obj->rx_callback != NULL) {
     obj->rx_callback(obj);
   }
+#endif  
 }
 
 /**

Original file line number	Diff line number	Diff line change
`@@ -808,10 +808,15 @@ uint8_t uart_index(UART_HandleTypeDef *huart)`
`808`	`808`	`*/`
`809`	`809`	`void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)`
`810`	`810`	`{`
	`811`	`+#if defined(ARDUINO_SensorXEL) \|\| defined(ARDUINO_SensorXEL_revE)\`
	`812`	`+ \|\| defined(ARDUINO_PowerXEL) //\|\| defined(ARDUINO_CommXEL)`
	`813`	`+ (void)huart;`
	`814`	`+#else`
`811`	`815`	`serial_t *obj = get_serial_obj(huart);`
`812`	`816`	`if (obj && obj->rx_callback != NULL) {`
`813`	`817`	`obj->rx_callback(obj);`
`814`	`818`	`}`
	`819`	`+#endif`
`815`	`820`	`}`
`816`	`821`
`817`	`822`	`/**`