Skip to content

Commit 66d5a9c

Browse files
sabas1080fpistm
sabas1080
authored and
fpistm
committed
Add RAK811 LoRa Tracker Board
Datasheet: http://docs.rakwireless.com/en/RAK811%20TrackerBoard/Software%20Development/RAK811%20TrackerBoard%20Datasheet%20V1.1.pdf Github: https://github.com/RAKWireless/RAK811_BreakBoard Using RAK 811 Lora Module Datasheet: http://docs.rakwireless.com/en/RAK811/Software%20Development/RAK811%C2%A0Lora%C2%A0Module%C2%A0Datasheet%C2%A0V1.3.pdf http://www.rakwireless.com/en/download/RAK811/Hardware%20Design Signed-off-by: sabas1080 <s@theinventorhouse.org>
1 parent d9db37a commit 66d5a9c

File tree

7 files changed

+1094
-0
lines changed

7 files changed

+1094
-0
lines changed

‎boards.txt

Lines changed: 62 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -452,6 +452,40 @@ Maple.menu.upload_method.serialMethod=Serial
452452
Maple.menu.upload_method.serialMethod.upload.protocol=maple_serial
453453
Maple.menu.upload_method.serialMethod.upload.tool=serial_upload
454454

455+
################################################################################
456+
# RAK boards
457+
458+
RAK.name=RAKWireless
459+
460+
RAK.build.vid=0x0483
461+
RAK.build.pid=0x5711
462+
RAK.vid.0=0x0483
463+
RAK.pid.0=0x5711
464+
465+
RAK.build.core=arduino
466+
RAK.build.board=RAK
467+
RAK.build.extra_flags=-D{build.product_line} {build.enable_usb} {build.xSerial}
468+
469+
# RAK811_TRACKER board
470+
RAK.menu.pnum.RAK811_TRACKER=RAK811 LoRa Tracker
471+
RAK.menu.pnum.RAK811_TRACKER.upload.maximum_size=131072
472+
RAK.menu.pnum.RAK811_TRACKER.upload.maximum_data_size=32768
473+
RAK.menu.pnum.RAK811_TRACKER.build.mcu=cortex-m3
474+
RAK.menu.pnum.RAK811_TRACKER.build.board=RAK811_TRACKER
475+
RAK.menu.pnum.RAK811_TRACKER.build.series=STM32L1xx
476+
RAK.menu.pnum.RAK811_TRACKER.build.product_line=STM32L151xBA
477+
RAK.menu.pnum.RAK811_TRACKER.build.variant=RAK811_TRACKER
478+
RAK.menu.pnum.RAK811_TRACKER.build.cmsis_lib_gcc=arm_cortexM3l_math
479+
480+
# Upload menu
481+
RAK.menu.upload_method.serialMethod=Serial
482+
RAK.menu.upload_method.serialMethod.upload.protocol=maple_serial
483+
RAK.menu.upload_method.serialMethod.upload.tool=serial_upload
484+
485+
RAK.menu.upload_method.STLink=STLink
486+
RAK.menu.upload_method.STLink.upload.protocol=STLink
487+
RAK.menu.upload_method.STLink.upload.tool=stlink_upload
488+
455489

456490
################################################################################
457491
# Serialx activation
@@ -696,3 +730,31 @@ Maple.menu.opt.o3lto.build.flags.ldspecs=-flto
696730
Maple.menu.opt.ogstd=Debug (-g)
697731
Maple.menu.opt.ogstd.build.flags.optimize=-g -Og
698732
Maple.menu.opt.ogstd.build.flags.ldspecs=
733+
734+
RAK.menu.opt.osstd=Smallest (-Os default)
735+
RAK.menu.opt.osstd.build.flags.optimize=-Os
736+
RAK.menu.opt.osstd.build.flags.ldspecs=
737+
RAK.menu.opt.oslto=Smallest (-Os) with LTO
738+
RAK.menu.opt.oslto.build.flags.optimize=-Os -flto
739+
RAK.menu.opt.oslto.build.flags.ldspecs=-flto
740+
RAK.menu.opt.o1std=Fast (-O1)
741+
RAK.menu.opt.o1std.build.flags.optimize=-O1
742+
RAK.menu.opt.o1std.build.flags.ldspecs=
743+
RAK.menu.opt.o1lto=Fast (-O1) with LTO
744+
RAK.menu.opt.o1lto.build.flags.optimize=-O1 -flto
745+
RAK.menu.opt.o1lto.build.flags.ldspecs=-flto
746+
RAK.menu.opt.o2std=Faster (-O2)
747+
RAK.menu.opt.o2std.build.flags.optimize=-O2
748+
RAK.menu.opt.o2std.build.flags.ldspecs=
749+
RAK.menu.opt.o2lto=Faster (-O2) with LTO
750+
RAK.menu.opt.o2lto.build.flags.optimize=-O2 -flto
751+
RAK.menu.opt.o2lto.build.flags.ldspecs=-flto
752+
RAK.menu.opt.o3std=Fastest (-O3)
753+
RAK.menu.opt.o3std.build.flags.optimize=-O3
754+
RAK.menu.opt.o3std.build.flags.ldspecs=
755+
RAK.menu.opt.o3lto=Fastest (-O3) with LTO
756+
RAK.menu.opt.o3lto.build.flags.optimize=-O3 -flto
757+
RAK.menu.opt.o3lto.build.flags.ldspecs=-flto
758+
RAK.menu.opt.ogstd=Debug (-g)
759+
RAK.menu.opt.ogstd.build.flags.optimize=-g -Og
760+
RAK.menu.opt.ogstd.build.flags.ldspecs=

‎variants/RAK811_TRACKER/PeripheralPins.c

Lines changed: 221 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,221 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2018, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* Redistribution and use in source and binary forms, with or without
7+
* modification, are permitted provided that the following conditions are met:
8+
*
9+
* 1. Redistributions of source code must retain the above copyright notice,
10+
* this list of conditions and the following disclaimer.
11+
* 2. Redistributions in binary form must reproduce the above copyright notice,
12+
* this list of conditions and the following disclaimer in the documentation
13+
* and/or other materials provided with the distribution.
14+
* 3. Neither the name of STMicroelectronics nor the names of its contributors
15+
* may be used to endorse or promote products derived from this software
16+
* without specific prior written permission.
17+
*
18+
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19+
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20+
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
21+
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
22+
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23+
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
24+
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
25+
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
26+
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
27+
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
28+
*******************************************************************************
29+
* Automatically generated from STM32L151C(6-8-B)TxA.xml
30+
*/
31+
#include "Arduino.h"
32+
#include "PeripheralPins.h"
33+
34+
/* =====
35+
* Note: Commented lines are alternative possibilities which are not used per default.
36+
* If you change them, you will have to know what you do
37+
* =====
38+
*/
39+
40+
//*** ADC ***
41+
42+
#ifdef HAL_ADC_MODULE_ENABLED
43+
const PinMap PinMap_ADC[] = {
44+
// {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0
45+
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1
46+
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 - ADC_VBAT
47+
// {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 - RADIO_DIO_2
48+
// {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 - RADIO_RF_CTX_PA
49+
// {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 - RADIO_SCLK
50+
// {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 - RADIO_MISO
51+
// {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 - RADIO_MOSI
52+
// {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 - RADIO_NSS
53+
// {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 - RADIO_DIO_1
54+
{PB_12, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC_IN18
55+
// {PB_13, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 19, 0)}, // ADC_IN19 - RADIO_RESET
56+
// {PB_14, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 20, 0)}, // ADC_IN20 - LIS3DH_INT1_PIN
57+
// {PB_15, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 21, 0)}, // ADC_IN21 - LIS3DH_INT2_PIN
58+
{NC, NP, 0}
59+
};
60+
#endif
61+
62+
//*** DAC ***
63+
64+
#ifdef HAL_DAC_MODULE_ENABLED
65+
const PinMap PinMap_DAC[] = {
66+
// {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1 - RADIO_RF_CTX_PA
67+
// {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 - RADIO_SCLK
68+
{NC, NP, 0}
69+
};
70+
#endif
71+
72+
//*** I2C ***
73+
74+
#ifdef HAL_I2C_MODULE_ENABLED
75+
const PinMap PinMap_I2C_SDA[] = {
76+
// {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // RADIO_RF_CBT_HF
77+
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
78+
// {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, // GPS_UART_RX
79+
{NC, NP, 0}
80+
};
81+
#endif
82+
83+
#ifdef HAL_I2C_MODULE_ENABLED
84+
const PinMap PinMap_I2C_SCL[] = {
85+
// {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // RADIO_RF_CRX_RX
86+
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
87+
// {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, // GPS_UART_TX
88+
{NC, NP, 0}
89+
};
90+
#endif
91+
92+
//*** PWM ***
93+
94+
#ifdef HAL_TIM_MODULE_ENABLED
95+
const PinMap PinMap_PWM[] = {
96+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
97+
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
98+
// {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - ADC_VBAT
99+
// {PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 - ADC_VBAT
100+
// {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 - RADIO_DIO_2
101+
// {PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 - RADIO_DIO_2
102+
// {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - RADIO_SCLK
103+
// {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - RADIO_MISO
104+
// {PA_6, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1 - RADIO_MISO
105+
// {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - RADIO_MOSI
106+
// {PA_7, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 - RADIO_MOSI
107+
// {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - GPS_POWER_ON_PIN
108+
// {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 - RADIO_NSS
109+
// {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 - RADIO_DIO_1
110+
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
111+
{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - LED2
112+
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
113+
// {PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - RADIO_RF_CRX_RX
114+
// {PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 - RADIO_RF_CBT_HF
115+
{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
116+
// {PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
117+
// {PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
118+
{PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
119+
// {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - GPS_UART_TX
120+
// {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 - GPS_UART_RX
121+
{PB_12, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
122+
// {PB_13, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 - RADIO_RESET
123+
// {PB_14, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 - LIS3DH_INT1_PIN
124+
// {PB_15, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 - LIS3DH_INT2_PIN
125+
{NC, NP, 0}
126+
};
127+
#endif
128+
129+
//*** SERIAL ***
130+
131+
#ifdef HAL_UART_MODULE_ENABLED
132+
const PinMap PinMap_UART_TX[] = {
133+
// {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // ADC_VBAT
134+
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // UART_TX
135+
// {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // RADIO_RF_CRX_RX
136+
{PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // GPS_UART_TX
137+
{NC, NP, 0}
138+
};
139+
#endif
140+
141+
#ifdef HAL_UART_MODULE_ENABLED
142+
const PinMap PinMap_UART_RX[] = {
143+
// {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // RADIO_DIO_2
144+
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // UART_RX
145+
// {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // RADIO_RF_CBT_HF
146+
{PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // GPS_UART_RX
147+
{NC, NP, 0}
148+
};
149+
#endif
150+
151+
#ifdef HAL_UART_MODULE_ENABLED
152+
const PinMap PinMap_UART_RTS[] = {
153+
{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
154+
// {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // LED1
155+
// {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // LIS3DH_INT1_PIN
156+
{NC, NP, 0}
157+
};
158+
#endif
159+
160+
#ifdef HAL_UART_MODULE_ENABLED
161+
const PinMap PinMap_UART_CTS[] = {
162+
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
163+
// {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // RADIO_DIO_0
164+
// {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // RADIO_RESET
165+
{NC, NP, 0}
166+
};
167+
#endif
168+
169+
//*** SPI ***
170+
171+
#ifdef HAL_SPI_MODULE_ENABLED
172+
const PinMap PinMap_SPI_MOSI[] = {
173+
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // RADIO_MOSI
174+
// {PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // LED1
175+
// {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
176+
// {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // LIS3DH_INT2_PIN
177+
{NC, NP, 0}
178+
};
179+
#endif
180+
181+
#ifdef HAL_SPI_MODULE_ENABLED
182+
const PinMap PinMap_SPI_MISO[] = {
183+
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // RADIO_MISO
184+
// {PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // RADIO_DIO_0
185+
// {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // LED2
186+
// {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // LIS3DH_INT1_PIN
187+
{NC, NP, 0}
188+
};
189+
#endif
190+
191+
#ifdef HAL_SPI_MODULE_ENABLED
192+
const PinMap PinMap_SPI_SCLK[] = {
193+
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // RADIO_SCLK
194+
// {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
195+
// {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // RADIO_RESET
196+
{NC, NP, 0}
197+
};
198+
#endif
199+
200+
#ifdef HAL_SPI_MODULE_ENABLED
201+
const PinMap PinMap_SPI_SSEL[] = {
202+
// {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // RADIO_RF_CTX_PA
203+
// {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // GPS_POWER_ON_PIN
204+
{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
205+
{NC, NP, 0}
206+
};
207+
#endif
208+
209+
//*** CAN ***
210+
211+
//*** No CAN_RD ***
212+
213+
//*** No CAN_TD ***
214+
215+
//*** ETHERNET ***
216+
217+
//*** No Ethernet ***
218+
219+
//*** QUADSPI ***
220+
221+
//*** No QUADSPI ***

‎variants/RAK811_TRACKER/PinNamesVar.h

Lines changed: 25 additions & 0 deletions
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,25 @@
1+
/* SYS_WKUP */
2+
#ifdef PWR_WAKEUP_PIN1
3+
SYS_WKUP1 = PA_0,
4+
#endif
5+
#ifdef PWR_WAKEUP_PIN2
6+
SYS_WKUP2 = PC_13,
7+
#endif
8+
#ifdef PWR_WAKEUP_PIN3
9+
SYS_WKUP3 = NC,
10+
#endif
11+
#ifdef PWR_WAKEUP_PIN4
12+
SYS_WKUP4 = NC,
13+
#endif
14+
#ifdef PWR_WAKEUP_PIN5
15+
SYS_WKUP5 = NC,
16+
#endif
17+
#ifdef PWR_WAKEUP_PIN6
18+
SYS_WKUP6 = NC,
19+
#endif
20+
#ifdef PWR_WAKEUP_PIN7
21+
SYS_WKUP7 = NC,
22+
#endif
23+
#ifdef PWR_WAKEUP_PIN8
24+
SYS_WKUP8 = NC,
25+
#endif

0 commit comments

Comments
 (0)