Skip to content

Commit d97be3c

Browse files
fpistmfpistm
committed
variant: WB: add STM32WB5MM-DK
Signed-off-by: Frederic Pillon <frederic.pillon@st.com>
1 parent ab92e67 commit d97be3c

File tree

5 files changed

+685
-0
lines changed

5 files changed

+685
-0
lines changed

‎README.md

+1
Original file line numberDiff line numberDiff line change
@@ -149,6 +149,7 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d
149149
| :green_heart: | STM32L475VG | [B-L475E-IOT01A](http://www.st.com/en/evaluation-tools/b-l475e-iot01a.html) | *1.0.1* | |
150150
| :green_heart: | STM32F413ZH | [32F413HDISCOVERY](https://www.st.com/en/evaluation-tools/32f413hdiscovery.html) | *1.9.0* | |
151151
| :green_heart: | STM32L4S5VI | [B-L4S5I-IOT01A](https://www.st.com/en/evaluation-tools/b-l4s5i-iot01a.html) | *2.0.0* | |
152+
| :yellow_heart: | STM32WB5MMG | [STM32WB5MM-DK](https://www.st.com/en/evaluation-tools/stm32wb5mm-dk.html) | **2.1.0** | |
152153

153154
### [Eval](https://www.st.com/en/evaluation-tools/stm32-eval-boards.html) boards
154155

‎boards.txt

+14
Original file line numberDiff line numberDiff line change
@@ -823,6 +823,20 @@ Disco.menu.pnum.B_L072Z_LRWAN1.build.peripheral_pins=-DCUSTOM_PERIPHERAL_PINS
823823
Disco.menu.pnum.B_L072Z_LRWAN1.build.cmsis_lib_gcc=arm_cortexM0l_math
824824
Disco.menu.pnum.B_L072Z_LRWAN1.build.extra_flags=-D{build.product_line} {build.enable_usb} {build.xSerial} -D__CORTEX_SC=0
825825

826+
# STM32WB5MM-DK board
827+
Disco.menu.pnum.STM32WB5MM_DK=STM32WB5MM-DK
828+
Disco.menu.pnum.STM32WB5MM_DK.node="DIS_WB5MMG"
829+
Disco.menu.pnum.STM32WB5MM_DK.upload.maximum_size=827392
830+
Disco.menu.pnum.STM32WB5MM_DK.upload.maximum_data_size=196608
831+
Disco.menu.pnum.STM32WB5MM_DK.build.mcu=cortex-m4
832+
Disco.menu.pnum.STM32WB5MM_DK.build.flags.fp=-mfpu=fpv4-sp-d16 -mfloat-abi=hard
833+
Disco.menu.pnum.STM32WB5MM_DK.build.board=STM32WB5MM_DK
834+
Disco.menu.pnum.STM32WB5MM_DK.build.series=STM32WBxx
835+
Disco.menu.pnum.STM32WB5MM_DK.build.product_line=STM32WB5Mxx
836+
Disco.menu.pnum.STM32WB5MM_DK.build.variant=STM32WBxx/WB5MMGH
837+
Disco.menu.pnum.STM32WB5MM_DK.build.peripheral_pins=-DCUSTOM_PERIPHERAL_PINS
838+
Disco.menu.pnum.STM32WB5MM_DK.build.cmsis_lib_gcc=arm_cortexM4lf_math
839+
826840
# Upload menu
827841
Disco.menu.upload_method.MassStorage=Mass Storage
828842
Disco.menu.upload_method.MassStorage.upload.protocol=

‎variants/STM32WBxx/WB5MMGH/PeripheralPins_STM32WB5MM_DK.c

+290
Original file line numberDiff line numberDiff line change
@@ -0,0 +1,290 @@
1+
/*
2+
*******************************************************************************
3+
* Copyright (c) 2020-2021, STMicroelectronics
4+
* All rights reserved.
5+
*
6+
* This software component is licensed by ST under BSD 3-Clause license,
7+
* the "License"; You may not use this file except in compliance with the
8+
* License. You may obtain a copy of the License at:
9+
* opensource.org/licenses/BSD-3-Clause
10+
*
11+
*******************************************************************************
12+
*/
13+
/*
14+
* Automatically generated from STM32WB5MMGHx.xml
15+
* CubeMX DB release 6.0.21
16+
*/
17+
#if defined(ARDUINO_STM32WB5MM_DK)
18+
#include "Arduino.h"
19+
#include "PeripheralPins.h"
20+
21+
/* =====
22+
* Notes:
23+
* - The pins mentioned Px_y_ALTz are alternative possibilities which use other
24+
* HW peripheral instances. You can use them the same way as any other "normal"
25+
* pin (i.e. analogWrite(PA7_ALT1, 128);).
26+
*
27+
* - Commented lines are alternative possibilities which are not used per default.
28+
* If you change them, you will have to know what you do
29+
* =====
30+
*/
31+
32+
//*** ADC ***
33+
34+
#ifdef HAL_ADC_MODULE_ENABLED
35+
WEAK const PinMap PinMap_ADC[] = {
36+
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
37+
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
38+
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
39+
// {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
40+
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
41+
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
42+
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
43+
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
44+
// {PA_8, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
45+
// {PA_9, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 16, 0)}, // ADC1_IN16
46+
{PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
47+
{PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
48+
{PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
49+
{PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
50+
{PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
51+
{PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
52+
{NC, NP, 0}
53+
};
54+
#endif
55+
56+
//*** No DAC ***
57+
58+
//*** I2C ***
59+
60+
#ifdef HAL_I2C_MODULE_ENABLED
61+
WEAK const PinMap PinMap_I2C_SDA[] = {
62+
{PA_10, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
63+
{PB_4, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
64+
// {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
65+
// {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
66+
{PB_11, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
67+
{PB_14, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
68+
{PC_1, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
69+
{NC, NP, 0}
70+
};
71+
#endif
72+
73+
#ifdef HAL_I2C_MODULE_ENABLED
74+
WEAK const PinMap PinMap_I2C_SCL[] = {
75+
{PA_7, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
76+
// {PA_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
77+
// {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
78+
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
79+
{PB_10, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
80+
{PB_13, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
81+
{PC_0, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
82+
{NC, NP, 0}
83+
};
84+
#endif
85+
86+
//*** TIM ***
87+
88+
#ifdef HAL_TIM_MODULE_ENABLED
89+
WEAK const PinMap PinMap_TIM[] = {
90+
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
91+
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
92+
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
93+
// {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
94+
{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
95+
{PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1
96+
{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
97+
{PA_7_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)}, // TIM17_CH1
98+
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
99+
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
100+
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
101+
// {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
102+
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
103+
// {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
104+
// {PB_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 1)}, // TIM16_CH1N
105+
// {PB_7, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 1)}, // TIM17_CH1N
106+
{PB_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
107+
{PB_8_ALT1, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1
108+
// {PB_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
109+
// {PB_9_ALT1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)}, // TIM17_CH1
110+
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
111+
// {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
112+
// {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
113+
{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
114+
{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
115+
{PD_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
116+
{PD_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
117+
{PE_0, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM16, 1, 0)}, // TIM16_CH1
118+
// {PE_1, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF14_TIM17, 1, 0)}, // TIM17_CH1
119+
{NC, NP, 0}
120+
};
121+
#endif
122+
123+
//*** UART ***
124+
125+
#ifdef HAL_UART_MODULE_ENABLED
126+
WEAK const PinMap PinMap_UART_TX[] = {
127+
{PA_2, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
128+
// {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
129+
{PB_5, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
130+
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
131+
// {PB_11, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
132+
{PC_1, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
133+
{NC, NP, 0}
134+
};
135+
#endif
136+
137+
#ifdef HAL_UART_MODULE_ENABLED
138+
WEAK const PinMap PinMap_UART_RX[] = {
139+
// {PA_3, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
140+
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
141+
{PA_12, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
142+
{PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
143+
{PB_10, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
144+
{PC_0, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
145+
{NC, NP, 0}
146+
};
147+
#endif
148+
149+
#ifdef HAL_UART_MODULE_ENABLED
150+
WEAK const PinMap PinMap_UART_RTS[] = {
151+
// {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
152+
// {PB_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
153+
{PB_12, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
154+
{NC, NP, 0}
155+
};
156+
#endif
157+
158+
#ifdef HAL_UART_MODULE_ENABLED
159+
WEAK const PinMap PinMap_UART_CTS[] = {
160+
{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
161+
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
162+
{PB_4, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
163+
// {PB_13, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_LPUART1)},
164+
{NC, NP, 0}
165+
};
166+
#endif
167+
168+
//*** SPI ***
169+
170+
#ifdef HAL_SPI_MODULE_ENABLED
171+
WEAK const PinMap PinMap_SPI_MOSI[] = {
172+
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
173+
// {PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
174+
{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
175+
{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
176+
{PC_1, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI2)},
177+
{PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
178+
{PD_4, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
179+
{NC, NP, 0}
180+
};
181+
#endif
182+
183+
#ifdef HAL_SPI_MODULE_ENABLED
184+
WEAK const PinMap PinMap_SPI_MISO[] = {
185+
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
186+
{PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
187+
{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
188+
{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
189+
{PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
190+
// {PD_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
191+
{NC, NP, 0}
192+
};
193+
#endif
194+
195+
#ifdef HAL_SPI_MODULE_ENABLED
196+
WEAK const PinMap PinMap_SPI_SCLK[] = {
197+
{PA_1, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
198+
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
199+
// {PA_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
200+
// {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
201+
{PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
202+
// {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
203+
{PD_1, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
204+
// {PD_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_SPI2)},
205+
{NC, NP, 0}
206+
};
207+
#endif
208+
209+
#ifdef HAL_SPI_MODULE_ENABLED
210+
WEAK const PinMap PinMap_SPI_SSEL[] = {
211+
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
212+
{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
213+
{PB_2, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
214+
// {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
215+
{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
216+
{PD_0, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
217+
{NC, NP, 0}
218+
};
219+
#endif
220+
221+
//*** No CAN ***
222+
223+
//*** No ETHERNET ***
224+
225+
//*** QUADSPI ***
226+
227+
#ifdef HAL_QSPI_MODULE_ENABLED
228+
WEAK const PinMap PinMap_QUADSPI_DATA0[] = {
229+
{PB_9, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO0
230+
{PD_4, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO0
231+
{NC, NP, 0}
232+
};
233+
#endif
234+
235+
#ifdef HAL_QSPI_MODULE_ENABLED
236+
WEAK const PinMap PinMap_QUADSPI_DATA1[] = {
237+
{PB_8, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO1
238+
{PD_5, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO1
239+
{NC, NP, 0}
240+
};
241+
#endif
242+
243+
#ifdef HAL_QSPI_MODULE_ENABLED
244+
WEAK const PinMap PinMap_QUADSPI_DATA2[] = {
245+
{PA_7, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO2
246+
{PD_6, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO2
247+
{NC, NP, 0}
248+
};
249+
#endif
250+
251+
#ifdef HAL_QSPI_MODULE_ENABLED
252+
WEAK const PinMap PinMap_QUADSPI_DATA3[] = {
253+
{PA_6, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO3
254+
{PD_7, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_IO3
255+
{NC, NP, 0}
256+
};
257+
#endif
258+
259+
#ifdef HAL_QSPI_MODULE_ENABLED
260+
WEAK const PinMap PinMap_QUADSPI_SCLK[] = {
261+
{PA_3, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_CLK
262+
{PB_10, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_CLK
263+
{NC, NP, 0}
264+
};
265+
#endif
266+
267+
#ifdef HAL_QSPI_MODULE_ENABLED
268+
WEAK const PinMap PinMap_QUADSPI_SSEL[] = {
269+
{PA_2, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_NCS
270+
// {PB_11, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_NCS
271+
{PD_3, QUADSPI, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_QUADSPI)}, // QUADSPI_BK1_NCS
272+
{NC, NP, 0}
273+
};
274+
#endif
275+
276+
//*** USB ***
277+
278+
#if defined(HAL_PCD_MODULE_ENABLED) || defined(HAL_HCD_MODULE_ENABLED)
279+
WEAK const PinMap PinMap_USB[] = {
280+
{PA_11, USB, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_USB)}, // USB_DM
281+
{PA_12, USB, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF10_USB)}, // USB_DP
282+
// {PA_13, USB, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_USB)}, // USB_NOE
283+
// {PC_9, USB, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_USB)}, // USB_NOE
284+
{NC, NP, 0}
285+
};
286+
#endif
287+
288+
//*** No SD ***
289+
290+
#endif /* ARDUINO_STM32WB5MM_DK */

0 commit comments

Comments
 (0)