Ikea pax trim

How to use some crown molding and baseboard trim to make Ikea PAX look like custom cabinetry. You won't believe the transformation!

After getting stuck on an image of a blue, custom walk-in closet, I decided I was going to figure out a way to get a similar look with a non-custom budget.

We created this Built In Primary Closet Renovation (IKEA Pax Closet hack) and now we have so much storage and it looks beautiful! I am so excited to share this project with you! Besides purchasing and renovating our home, which we used a contractor for most of the big renovations, this is BMW's and my

Lisa | Functional DIY & Design on Instagram: "So many people asked about the drawer part of this IKEA Pax hack. This was the easiest method I could figure out! 1️⃣ MEASURE: I measured the size of the opening, took off 1/8” for each gap (all around edges and in between each drawer) and divided the height by the number of panels. For me, this worked out to be the exact width of the 1x8 board! (Tip: I added a 3/4” piece of trim at the very bottom to close the gap… without this, the panels…

It may sound complex to make a separate wardrobe unit look built-in to the wall, but it’s actually pretty simple!

Kirsty Griffiths 🐓🇬🇧 on Instagram: "Make your own doors for the 75cm Ikea PAX💕 • This is my new Media / Stationary / office storage cupboard ❤️ • As you probably know IKEA don’t make matching doors for the 75cm wide wardrobe! I’ve also chopped this pax down to fit on top of a #kallax • Thought I’d try something different on the doors …. Mainly because the bigger trim is never in stock 🤪 • I’m about to prime and do my MDF / sealing the edge / stop the fluff trick ( full guide on my…

Sophia Hardy on Instagram: "🌟 Customising our IKEA PAX Wardrobe 🌟 This DIY took me weeks. Each door was primed 2x and painted 3/4x & there are 4 doors so that equals 🤔……a lot of painting. As you can see we built & fitted the wardrobe before we added skirting & carpet. This was so the wardrobe would fit flush to the wall and steady on the floor. We added a simple coving from @wickes and we used a similar trim to our architrave from @skirting4u to give the frame some shape (other than…

My walk-in closet reveal using the IKEA Pax Storage Planner, plus DIY hacks to make it look more custom

The BEST and easiest way to extend a Pax wardrobe and make it look built-in. This IKEA Pax hack is renter-friendly & gives you more space!

ALEX | DIY, Upcycling & Lifestyle on Instagram: "IKEA PAX HACK PART THREE ✌🏼 After the carcasses were built it was time to start adding the inserts for the wardrobes & securing them to the wall. We secured them to the wall using rawl plugs & screws & there’s much more in depth info about this on my pax wardrobe highlights. We then added a frame around the edges for the MDF to be secured to. After this it was time to start framing out the units to give the fully built in look - don’t…