Toyota Type A engine
The Type A engine was a straight-6 engine produced from 1935 through 1947 by Toyota.
The Type B was a technically more advanced version of the Type A.
The Type C was a straight-4 engine derived from the Type A.
Many parts were interchangeable between the Type A, Type B and Type C engines (e.g. pistons, valves, rods). Many of the same parts were also interchangeable with the Chevrolet Stovebolt engine, from which it was derived.
The Type E was a copy of a DKW engine.
The Type S was a straight-4 engine that replaced the Type A, B and C in Toyota's passenger cars.
Contents
Type A
| Type A | |
|---|---|
 |
|
| Overview | |
| Manufacturer | Toyota |
| Production | 1935-1947 |
| Combustion chamber | |
| Configuration | I6 |
| Displacement | 3,389 cc (3.4 L; 206.8 cu in) |
| Cylinder bore | 84.1 mm (3.3 in) |
| Piston stroke | 101.6 mm (4.0 in) |
| Cylinder block alloy | iron |
| Cylinder head alloy | iron |
| Valvetrain | OHV |
| Combustion | |
| Fuel system | carburettor |
| Fuel type | Gasoline |
| Output | |
| Power output | 62 PS (46 kW; 61 hp) |
The Type A engine was Toyota's first production engine, being produced from 1935 through 1947.
This engine was a 3,389 cc (3.4 L; 206.8 cu in) pushrod, overhead valve, 6-cylinder, three bearing engine copied from the 1929-36 Chevrolet Gen-1 3 bearing Stovebolt L6 OHV engine. By virtue of a modified intake manifold it produced 62 PS (46 kW), while the Chevrolet engine produced 60 PS (44 kW). GM used a number of local Japanese suppliers for the smaller engine parts (e.g. carburettors). Toyota was able to use the same suppliers for its cars. The parts were identical enough that pistons, rods, valves, etc. could be used in both the Chevrolet and Toyota engines interchangeably. There are several recorded instances of parts intended for one being used to repair the other.[1]
Toyota had initially considered copying the Ford flathead V8 because it was the most popular engine in Japan at the time. However, the machining of 2 separate banks of cylinders would add too much to the production cost, so the Chevrolet engine was copied instead.[1]
Other references to the Chevy engine claim different power figures. Different manufactures used different measuring techniques (e.g. with or without the generator/alternator connected), engines differed from year to year and that some manufacturers simply lied. In this case, Toyota did back to back comparisons using the same techniques, so it is likely that the Toyota engine did in fact produce slightly more power than the Chevy engine on which it was based. Also, the Chevy engine was likely to be a year or two old, so the current Chevy engine may have produced even more power.
Applications
Type B
| Type B | |
|---|---|
| Overview | |
| Manufacturer | Toyota |
| Production | 1937-1955 |
| Combustion chamber | |
| Configuration | I6 |
| Displacement | 3,386 cc (3.4 L; 206.6 cu in) |
| Cylinder bore | 84.1 mm (3.3 in)[2] |
| Piston stroke | 101.6 mm (4.0 in)[2] |
| Cylinder block alloy | iron |
| Cylinder head alloy | iron |
| Valvetrain | OHV |
| Compression ratio | 6.4:1[2] |
| Combustion | |
| Fuel system | carburettor |
| Fuel type | Gasoline |
| Output | |
| Power output | 62-82 HP |
| Chronology | |
| Successor | Toyota F engine |
The 3,386 cc (3.4 L; 206.6 cu in) Type B was produced from 1937 through 1955 as a more technically advanced version of the Type A. The design was based on the Chevrolet 207 engine, and built under license but with metric dimensions and minor revisions to suit the local market. It had a four-bearing crank and shaft-mounted rocker arms, as did the Chevrolet engine.
The Type B was succeeded by the similar 3.9 L Type F in 1955. The Type F is based on the larger G.M.C. 1939-63 L6 OHV engine in the same way that the Type A and Type B were based on the Chevrolet engines of their times.
An unrelated 4-cylinder diesel engine introduced in the 1970s was also called the Type B.
Applications
- AC sedan
- GB truck
- 1951-1955 BX truck (82 PS)[3]
- BJ Jeep (later renamed the Land Cruiser)
- BH26 Police Patrol Car
- BH28 Ambulance
Type C
| Type C | |
|---|---|
| Overview | |
| Manufacturer | Toyota |
| Production | 1939-1941 |
| Combustion chamber | |
| Configuration | I4 |
| Displacement | 2,259 cc (2.3 L; 137.9 cu in) |
| Cylinder bore | 84.1 mm (3.3 in)[4] |
| Piston stroke | 101.6 mm (4.0 in) |
| Cylinder block alloy | iron |
| Cylinder head alloy | iron |
| Valvetrain | OHV |
| Compression ratio | 6.4:1 |
| Combustion | |
| Fuel system | carburettor |
| Fuel type | Gasoline |
| Output | |
| Power output | 49 PS (36 kW; 48 hp) |
| Torque output | 152 N⋅m (112 lb⋅ft) @ 1400 rpm |
The 2,259 cc (2.3 L; 137.9 cu in) Type C was produced from 1939 through 1941. It was formed by removing 2 cylinders from a Type A engine.
Applications
Type E
| Type E | |
|---|---|
| Overview | |
| Manufacturer | Toyota |
| Production | 1938 |
| Combustion chamber | |
| Configuration | I2 two-stroke |
| Displacement | 585 cc (0.6 L; 35.7 cu in)[4] |
| Combustion | |
| Fuel system | carburettor |
| Fuel type | Gasoline |
The 585 cc (0.6 L; 35.7 cu in) Type E was produced in 1938 only for the prototype EA sedan. It was a copy of the two-stroke engine used in the DKW F7.
Applications
Type S
| Type S | |
|---|---|
 |
|
| Overview | |
| Manufacturer | Toyota |
| Production | 1947-1959 |
| Combustion chamber | |
| Configuration | I4 |
| Displacement | 995 cc (1.0 L; 60.7 cu in) |
| Cylinder bore | 65 mm (2.6 in)[4] |
| Piston stroke | 75 mm (3.0 in) |
| Cylinder block alloy | iron |
| Cylinder head alloy | iron |
| Valvetrain | side valve |
| Compression ratio | 6.5:1 |
| Combustion | |
| Fuel system | carburettor |
| Fuel type | Gasoline |
| Output | |
| Power output | 27 PS (20 kW; 27 hp) |
| Torque output | 98 N⋅m (72 lb⋅ft) @ 2400 rpm |
| Chronology | |
| Predecessor | None |
| Successor | Toyota P engine |
The 995 cc (1.0 L; 60.7 cu in) Type S was produced from 1947[5] through 1959. It was unrelated to previous Toyota engines, being designed by reverse-engineering a 1930s Adler Trumpf Junior's engine.[citation needed]
Applications
- SA sedan
- SB light truck
- SC sedan
- SD sedan
- SF sedan
- SG light truck
- Toyopet Light Truck SKB/SK20 Toyoace
- ST10 Corona, ST16 Corona Van
See also
 |
Wikimedia Commons has media related to Toyota Type A engine. |
- List of Toyota engines
- Toyota AA passenger car
- Toyota G1 truck
References
- ↑ 1.0 1.1 "Japan's Toyota with Stovebolts", Bob Hall, in "Special-Interest Autos", March–April 1977
- ↑ 2.0 2.1 2.2 Toyota Land Cruiser Data Library
- ↑ Lua error in package.lua at line 80: module 'strict' not found.
- ↑ 4.0 4.1 4.2 "The Japanese Automobile Industry: Technology and Management at Nissan & Toyota", Michael Cusumano, Cambridge (Mass.) & London: The Harvard Univ. Press, 1985, ISBN 0-674-47256-X
- ↑ "Fifty Years of Toyota Concept Cars", in "the wheel extended", vol 17, no.3, 1987, Toyota Motor Corporation, ISSN 0049-755X
